Extract from IDEX Catalog - Connectors by Biotech Fluidics

FLUIDIC CATALOG

FLUIDIC PRODUCTS AND INFORMATION Fluidics Products

idex-hs.com

BIOTECH is a Premium Distributor for IDEX Health & Science

Laser Products

+1 760 438 2131 Connectors

Optical Filters

Shutter Products

semrock.com

+1 585 244 7220

For For your your information, information, our our U.S. U.S. Federal Federal Taxpayer Taxpayer Identification Identification number number is is 01-0736657; 01-0736657; European European Taxpayer Taxpayer Identification Identification number number is is DE DE 146581180. 146581180.

ORDER PROCESSING/ SHIPPING Orders Orders placed placed on on our our website website process process and and ship ship as as specified specified during during the the checkout checkout process. process. Orders Orders that that are are placed placed via via fax/email fax/email will will be be subject subject to to aa $100 $100 minimum minimum order order quantity quantity and and typically typically process process within within one one business business day day and and ship ship within within two two business business days. days. Customers Customers who who have have established established contract contract pricing pricing terms terms must must place place catalog catalog orders orders directly directly with with their their Customer Customer Service Service representative. representative. All All shipments shipments are are FCA FCA unless unless otherwise otherwise noted. noted. For For orders orders not not placed placed via via our our website, website, shipping shipping charges charges will will be be prepaid prepaid and and added added to to the the invoice. invoice. Or, Or, ifif requested, requested, we we will will charge charge your your carrier carrier account account number. number.

TERMS Credit Credit cards cards are are accepted accepted for for orders orders placed placed within within the the United United States. States. Purchase Purchase orders orders may may also also be be used used by by qualified qualified customers. customers. No No international international credit credit card card payment payment is is possible. possible. No No international international shipments shipments are are possible. possible. For For terms terms and and conditions conditions of of sale sale please please visit visit www.idex-hs.com/ www.idex-hs.com/ legal-notices. legal-notices. Terms Terms and and prices prices are are subject subject to to change change without without notice. notice.

ORDERING ORDERING INFORMATION INFORMATION

IDX2398-1_Catalog-BioTech.indb IDX2398-1_Catalog-BioTech.indb 22

RETURN OF MATERIALS Returns Returns must must be be authorized authorized in in advance. advance. Please Please contact contact us us within within 30 30 days days of of purchase purchase for for your your Returns Returns Material Material Authorization Authorization (RMA) (RMA) Number. Number. A A restocking restocking fee fee may may apply. apply. To To request request aa Return Return Materials Materials Authorization Authorization for for IDEX IDEX Health Health & & Science Science products products visit visit www.idex-hs.com/return. www.idex-hs.com/return. Product Product purchased purchased through through aa Distributor Distributor must must be be returned returned directly directly to to that that Distributor. Distributor. Please Please contact contact them them for for Return Return Material Material Authorization Authorization procedures. procedures.

DIRECT FROM OUR GLOBAL DISTRIBUTION NETWORK IDEX IDEX Health Health & & Science Science has has established established relationships relationships with with aa global global network network of of Distributors Distributors that that offer offer outstanding outstanding product product support support and and assistance. assistance. In In order order to to meet meet our our customerâ&#x20AC;&#x2122;s customerâ&#x20AC;&#x2122;s needs, needs, and and the the demands demands of of being being aa global global supplier, supplier, we we have have come come to to rely rely on on our our authorized authorized Distributors Distributors to to provide provide value-added value-added service service and and support support of of our our products. products. While While we we are are happy happy to to take take your your order order directly, directly, we we encourage encourage you you to to contact contact your your local local IDEX IDEX Health Health & & Science Science Distributor. Distributor.

HOW TO FIND A LOCAL DISTRIBUTOR FOR FLUIDICS PRODUCTS For For aa complete complete distributor distributor listing listing please please visit visit www.idex-hs.com/ www.idex-hs.com/ distributors distributors or or email: email: US: US: IHSOrders@idexcorp.com IHSOrders@idexcorp.com Europe: Europe: CustomerService.hsEurope@ CustomerService.hsEurope@ idexcorp.com idexcorp.com Asia: Asia: CustomerService.hsAsia@ CustomerService.hsAsia@ idexcorp.com idexcorp.com Our Our customer customer service service team team will will help help you you contact contact aa distributor distributor in in your your area. area.

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS For For aa complete complete distributor distributor listing listing please please visit visit www.semrock.com/ www.semrock.com/ international-distributors.aspx international-distributors.aspx

The The products products in in this this catalog catalog are are intended intended for for use use with with analytical, analytical, biotechnology biotechnology and and diagnostic diagnostic equipment equipment and and accessories. accessories. THE THE MANUFACTURERS MANUFACTURERS OF OF THE THE PRODUCTS PRODUCTS IN IN THIS THIS CATALOG CATALOG SHALL SHALL HAVE HAVE NO NO LIABILITY LIABILITY WHATSOEVER WHATSOEVER DUE DUE TO TO ANY ANY MISUSE MISUSE OF OF THEIR THEIR PRODUCTS. PRODUCTS. Of Of course, course, the the safe safe use use of of our our products products depends depends on on our our customers, customers, since since itit isis you you who who select select and and control control the the protective protective gear gear and and safety safety procedures procedures used, used, as as well well as as the the pressures, pressures, temperatures, temperatures, solvents, solvents, samples, samples, ventilation, ventilation, and and other other variables. variables. Product Product and and material material performance performance ratings ratings are are provided provided as as guides guides only. only. Individual Individual field field tests tests should should be be performed performed by by customers customers to to determine determine safe safe operating operating parameters parameters given given your your particular particular procedures procedures and and use. use. IDEX IDEX Health Health & & Science Science facilities facilities are are certified certified ISO ISO 9001. 9001.

www.idex-hs.com www.idex-hs.com

12/14/2016 12/2/2016 12/2/2016 2:03:53 3:49:52 3:49:52 PM PM

Fluidics Products idex-hs.com

Laser Products +1 760 438 2131

Optical Filters

Shutter Products

semrock.com

+1 585 244 7220

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

RETURN OF MATERIALS Returns must be authorized in advance. Please contact us within 30 days of purchase for your Returns Material Authorization (RMA) Number. A restocking fee may apply. To request a Return Materials Authorization for IDEX Health & Science products visit www.idex-hs.com/return. Product purchased through a Distributor must be returned directly to that Distributor. Please contact them for Return Material Authorization procedures.

DIRECT FROM OUR GLOBAL DISTRIBUTION NETWORK

GLOBAL PREMIUM DISTRIBUTOR IDEX Health & Science has established All shipments are FCA unless relationships with a global network Biotech AB in Sweden/Europe (Headquarter), otherwise noted. For orders not of Distributors that offer outstanding placed via our website, shipping Biotech USA LLC and Bionik Inc support Japanand are Global product assistance. charges will be prepaid and added to In order to meet our customerâ&#x20AC;&#x2122;s Premium Distributors of IDEX Health & Science. the invoice. Or, if requested, we will needs, and the demands of being charge your carrier account number. a global supplier, we have come to rely on our authorized Distributors to provide value-added service and support of our products. While we are Credit cardsDELIVERY are accepted for orders FAST happy to take your order directly, we placed within the United States. Withorders several weekly from manuencourage you IDEX to contact your local Purchase may also be usedshipments by IDEX Health & Science Distributor. qualified customers. No international facturing sites in US, together with our extensive credit card payment is possible. we support the European & NoSwedish international warehouse, shipments are possible. For terms and conditions Global market with short delivery times as well as of sale please visit www.idex-hs.com/ fast answers on technical questions and a high level legal-notices. Terms and prices are subject to change without notice.

TERMS

of flexibility.

ORDERING INFORMATION

IDX2398-1_Catalog-BioTech.indb 2

HOW TO FIND A LOCAL DISTRIBUTOR FOR FLUIDICS PRODUCTS For a complete distributor listing please visit www.idex-hs.com/ distributors or email: US: IHSOrders@idexcorp.com Europe: CustomerService.hsEurope@ idexcorp.com Asia: CustomerService.hsAsia@ idexcorp.com Our customer service team will help you contact a distributor in your area.

LOCAL HOW TODISTRIBUTORS FIND A LOCAL DISTRIBUTOR FOR In almost every European country we work in close SEMROCK PRODUCTS For a complete distributor co-operation with listing local distributors that supports please visit www.semrock.com/ you with excellent daily service, long experience and international-distributors.aspx highest level of technical assistance. The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular procedures and use. IDEX Health & Science facilities are certified ISO 9001.

FULL IDEX ASSORTMENT With the full IDEX assortment of components for fluidic systems along with our long experience and know-how in the field we can assure you to always do our very best in supplying you with excellent solutions and products. Customized OEM solutions, especially in the field of degassing, is something we offer to instrument manufacturers globally. www.idex-hs.com

12/2/2016 3:49:52 PM

Fluidics Products idex-hs.com

Laser Products

BIOTECH + IDEX = EVERYTHING FOR THE LAB

+1 760 438 2131

KNOW-HOW AND A WIDE ASSORTMENT

Optical Filters

Shutter Products

semrock.com

+1 585 244 7220 As Global Premium Distributor for IDEX we have special know-how about their assortment and can provide you with the right mix of products for a successful lab. We have cutting edge knowledge to tailor the

RETURN OF MATERIALS

ORDER PROCESSING/ SHIPPING

may may apply. apply. To To request request aa Return Return US: US: In this field, we offer of well-known Materials Materials Authorization Authorization for for IDEX IDEX a number IHSOrders@idexcorp.com IHSOrders@idexcorp.com Health Health & & Science Science products products visit visit Europe: Europe: brands, such as Systec, Upchurch, Rheodyne www.idex-hs.com/return. www.idex-hs.com/return. CustomerService.hsEurope@ CustomerService.hsEurope@ Product Product purchased through through aa andpurchased Isolation Technologies - all to give you the idexcorp.com idexcorp.com Distributor Distributor must must be be returned returned Asia: Asia: best solutions. directly directly to to that that Distributor. Distributor. Please Please CustomerService.hsAsia@ CustomerService.hsAsia@ contact contact them them for for Return Return Material Material idexcorp.com idexcorp.com Authorization Authorization procedures. procedures. Our Our customer customer service service team team will will help help you you contact contact aa distributor distributor in in your your area. area. DIRECT FROM OUR GLOBAL

Orders Orders placed placed on on our our website website process process and and ship ship as as specified specified during during the the checkout checkout process. process. Orders Orders that that are are placed placed via via fax/email fax/email will will be be subject subject to to aa $100 $100 minimum minimum order order quantity quantity and and typically typically process process within within one one business business day day and and ship ship within within two two business business days. days. Customers Customers who who have have established established contract contract pricing pricing terms terms must must place place catalog catalog orders orders directly directly with with their their Customer Customer Service Service representative. representative. All All shipments shipments are are FCA FCA unless unless otherwise otherwise noted. noted. For For orders orders not not placed placed via via our our website, website, shipping shipping charges charges will will be be prepaid prepaid and and added added to to the the invoice. invoice. Or, Or, ifif requested, requested, we we will will charge charge your your carrier carrier account account number. number.

HOW TO FIND A LOCAL

DISTRIBUTOR Returns Returns must must be be authorized authorized in in system for laboratories’ specific needsFOR for fluidic FLUIDICS PRODUCTS advance. advance. Please Please contact contact us us within within For For aa complete complete distributor listing listing handling. You will find a wide range ofdistributor products 30 30 days days of of purchase purchase for for your your please please visit visit www.idex-hs.com/ www.idex-hs.com/ Returns Returns Material Material Authorization Authorization distributors distributors ortype email: email: of fluid. to Number. suit every possible flow rate andor (RMA) (RMA) Number. A A restocking restocking fee fee

DISTRIBUTION NETWORK

IDEX IDEX Health Health & & Science Science has has established established relationships relationships with with aa global global network network of of Distributors Distributors that that offer offer outstanding outstanding product product support support and and assistance. assistance. In In order order to to meet meet our our customer’s customer’s needs, needs, and and the the demands demands of of being being aa global global supplier, supplier, we we have have come come to to rely rely on on our our authorized authorized Distributors Distributors to to provide provide value-added value-added service service and and support support of of our our products. products. While While we we are are happy happy to to take take your your order order directly, directly, we we encourage encourage you you to to contact contact your your local local IDEX IDEX Health Health & & Science Science Distributor. Distributor.

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS

For For aa complete complete distributor distributor listing listingSYSTEMS INNOVATIVE PRODUCTS FOR FLUIDIC

ORDERING ORDERING INFORMATION INFORMATION

IDX2398-1_Catalog-BioTech.indb IDX2398-1_Catalog-BioTech.indb 22

please please visit visit www.semrock.com/ www.semrock.com/ international-distributors.aspx international-distributors.aspx

www.biotech.se

www.idex-hs.com www.idex-hs.com

12/2/2016 12/2/2016 3:49:52 3:49:52 PM PM

CONNECTORS

FLUIDICS

Connectors are designed to securely join tubing together or to facilitate the joining of tubing to other fluid pathway components. We offer multiport connectors with different thread and port configurations to meet your system requirements and connection needs. Some of our connectors feature a True ZDV (Zero Dead Volume) internal configuration that helps minimize the formation of dead volume in your fluidic pathway. Our versatile adapters help bring two connectors with different configurations together. Connectors are manufactured from 316 stainless steel or from inert polymers to ensure chemical compatibility with the fluid passing through. Peristaltic tube connectors are ideal for making connections with soft-walled, peristaltic tubing. Our extensive line of connectors includes tees, crosses, Luer Adapters, barbed and threaded adapters, and a variety of other options.

FLUIDICS

IDX2398-1_Catalog.indb 62

THREADED ADAPTERS 79

HIGH PRESSURE MULTIPORT CONNECTORS

ULTRA HIGH PRESSURE MULTIPORT CONNECTORS

MICROTIGHTÂ® ADAPTERS

FLUIDIC CONNECTIONS

CONNECTORS

ACCESSORIES

NANOPORT ASSEMBLIES

LOW PRESSURE MULTIPORT CONNECTORS

LUER ADAPTERS

PERISTALTIC TUBE CONNECTORS

www.biotech.se

www.idex-hs.com

10/28/16 1:32 PM

idex-hs.com

FLUIDICS

Threaded Adapters

Fluidics Products

Laser Products

English, Metric, and NPT threaded adapters offered

together connectors +1 Bring 760different 438 threads 2131 with Manufactured from inert polymers — PEEK, PCTFE, ETFE, and PTFE

Optical Filters

Threaded Adapters come in a wide variety of configurations to meet your system requirements. They are designed to effectively bring together connectors with different threads. We offer them in English, Metric, and NPT versions. Manufactured from inert polymers and stainless steel they deliver excellent chemical resistance.

Shutter

English Threaded Adapters Products

semrock.com

versatile English Threaded Adapters are used specifically to securely attach +1Our 585 244 7220 connectors with different threads. We designed these adapters to work with English

All shipments are FCA unless otherwise noted. For orders not placed via our website, shipping charges will be prepaid and added to the invoice. Or, if requested, we will charge your carrier account number.

TERMS

ORDERING INFORMATION FLUIDICS FLUIDIC CONNECTIONS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 63 2

Returns must be authorized in advance. Please contact us within 30 days of purchase for your 5/16-24 Returns Material Authorization (RMA) Number. A restocking 1/4-28 fee may apply. To request a Return Materials Authorization for IDEX P-135 Health & Science products visit 0.080” (2.05 mm) thru-hole www.idex-hs.com/return.

HOW TO FIND A LOCAL 1.20” (3.05 cm) DISTRIBUTOR FOR FLUIDICS PRODUCTS 10-32 For a complete distributor listing please visit www.idex-hs.com/ distributors or email:5/16-24

US: IHSOrders@idexcorp.com 6000-076 Europe: 0.066” (1.70 mm) thru-hole CustomerService.hsEurope@ idexcorp.com

0.50” (1.27 cm)

0.83” (2.11 cm)

5/16-24 1/4-28

P-681

0.125” (3.20 mm) thru-hole

Product purchased through a Distributor must be returned 0.74” Asia: (1.88 cm) directly to that 0.49” Distributor. Please 1.11” CustomerService.hsAsia@ (2.82 cm) (1.24 cm) Material contact them for Return 0.85” idexcorp.com (2.16 cm) Authorization procedures. Our customer service team will help you contact a distributor in your area. DIRECT FROM OUR GLOBAL

DISTRIBUTION NETWORK 1/4-28

IDEX Health & Science has established 5/16-24 relationships with a global network of Distributors that offer outstanding product support and assistance. P-718 In order to meet our customer’s 0.040” (1.00 mm) thru-hole needs, and the demands of being a global supplier, we have come to rely on our authorized Distributors to provide value-added service and support of our products. While we are happy to take your order directly, we encourage you to contact your local IDEX Health & Science Distributor.

1/2-20 A LOCAL HOW TO FIND DISTRIBUTOR FOR 1/4-28 SEMROCK PRODUCTS

For a complete distributor listing please visitP-684 www.semrock.com/ 0.130” (3.30 mm) thru-hole international-distributors.aspx

The 0.37” products in this catalog are intended for use with (0.94 cm) analytical, biotechnology and diagnostic equipment 0.92” OF THE and accessories. THE MANUFACTURERS (2.34 cm) 10-32 PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of our products depends on our customers, since it is you who select and control the protective gear and 1/4-28 safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and P-627 other variables. Product and material performance 0.020” (0.50 mm) thru-hole ratings are provided as guides only. Individual field Includes (1) F-300 for 1/16” OD tubing tests should be performed by customers to determine safe operating parameters given your particular procedures and use. IDEX Health & Science facilities are certified ISO 9001.

CONNECTORS

THREADED ADAPTERS

OPTICS

Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by qualified customers. No international credit card payment is possible. No international shipments are possible. For terms and conditions of sale please visit www.idex-hs.com/ legal-notices. Terms and prices are subject to change without notice.

0.79” (2.01 cm)

COLUMN HARDWARE

Orders placed on our website process and ship as specified during the checkout process. Orders that are placed via fax/email will be subject to a $100 minimum order quantity and typically process within one business day and ship within two business days. Customers who have established contract pricing terms must place catalog orders directly with their Customer Service representative.

RETURN OF MATERIALS

0.31” (0.79 cm)

DEGASSERS

ORDER PROCESSING/ SHIPPING

0.44” (1.12 cm)

VALVES

to English threaded geometries. Manufactured from Stainless Steel, PEEK, or Tefzel™ (ETFE), they deliver excellent solvent resistance.

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

FLUIDIC CONNECTIONS

Two of the many challenges researchers face regularly, are trying to use one style of fitting for all connections, or trying to join two different sizes of tubing. To assist in overcoming these challenges we have engineered one of the most extensive threaded adapter lines available.

Threaded adapters in a variety of configurations

www.biotech.se

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

2 64

FLUIDIC CONNECTIONS

FLUIDICS

Threaded Adapters (Cont.) Fluidics Products When using an adapter with male NOTE

0.68” (1.73 cm)

(external) threads, we recommend you first attach the adapter body into the receiving port, and then connect your tubing and fitting into the head of the adapter body.

1/2-20

Laser Use the 6000-076 Adapter to connect Products

1.17 (2.97 cm)

1/4-28 0.93” (2.36 cm)

1/4-28

Shutter Products P-652

0.063” (1.60 mm) thru-hole Includes (1) U-650/U-655 for 1/4” OD tubing

0.37” (0.94 cm)

10-32

P-654

(0.75 mm) thru-hole +10.030” 585 244 7220 (Note the new knurled design)

VALVES DEGASSERS

U-665

Tapered thru-hole Includes (1) U-650/U-655 for 1/4” OD tubing

1/16” OD tubing to the Preparative-

Optical Filters

1/4-28

U-659

+1 Scale 760Injector 438 2131 Valve (page 66).

You may not need an adapter to connect 1/16” OD tubing into your flat-bottom port. A less expensive alternative is to use a Flangeless Nut and Ferrule starting on page 45 or a Super Flangeless™ Nut and Ferrule starting on page 39.

1/2-20 5/16-24

RELATED PRODUCTS

Extra Long, 0.030” (0.76 mm) thru-hole

0.49” (1.24 cm)

0.73” (1.85 cm)

10-32

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

COLUMN HARDWARE

1.0” (2.54 cm)

idex-hs.com

semrock.com

OPTICS

0.68” (1.73 cm)

1.0” (2.54 cm)

ORDER PROCESSING/ SHIPPING Orders placed on our website process and ship as specified during the checkout process. Orders that are placed via fax/email will be subject to a $100 minimum order quantity and typically process within one business day and ship within two business days. Customers who have established contract pricing terms must place catalog orders directly with their Customer Service representative. All shipments are FCA unless otherwise noted. For orders not placed via our website, shipping charges will be prepaid and added to the invoice. Or, if requested, we will charge your carrier account number.

TERMS Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by qualified customers. No international credit card payment is possible. No international shipments are possible. For terms and conditions of sale please visit www.idex-hs.com/ legal-notices. Terms and prices are subject to change without notice.

ORDERING FLUIDIC CONNECTIONS FLUIDICS INFORMATION

IDX2398-1_Catalog.indb 64 IDX2398-1_Catalog-BioTech.indb 2

RETURN OF MATERIALS

1/4-28

HOW TO FIND A LOCAL

DISTRIBUTOR FOR Returns must be authorized in FLUIDICS PRODUCTS advance. Please contact us within P-669-01 For a complete distributor listing 30 days of purchase your 0.040”for (1.00 mm) thru-hole please visit www.idex-hs.com/ Returns Material Authorization 0.37” distributors or email: (RMA) Number. A restocking fee 0.37” (0.94 cm) 0.79” (0.94 cm) may apply. To request a Return US: (2.01 cm) Materials Authorization for IDEX IHSOrders@idexcorp.com 1/4-28 1/4-28 Health & Science products visit Europe: www.idex-hs.com/return. CustomerService.hsEurope@ 1/4-28 10-32 Product purchased through a idexcorp.com Distributor must be returned Asia: directly to that Distributor. Please CustomerService.hsAsia@ P-672 P-671 contact them for Return Material 0.040” (1.00 mm) thru-hole 0.050” (1.25 mm) thru-hole idexcorp.com Authorization procedures. Our customer service team will help you contact a distributor in your area. DIRECT FROM OUR GLOBAL

0.70” (1.78 cm)

DISTRIBUTION NETWORK

APPLICATION NOTE

HOW TO FIND A LOCAL IDEX Health & Science has established DISTRIBUTOR FOR relationships with a global network PRODUCTS of Distributors that offerare outstanding Here application SEMROCK ideas using two of our popular adapters: For a complete distributor listing product support and assistance. please www.semrock.com/ In order to meet our customer’s Many injection valves used invisit HPLC systems have 10-32 coned ports designed to accept international-distributors.aspx needs, and the demands of being 1/16” OD tubing. However, this may be a problem if large injection volumes are required a global supplier, we come (in have excess of to 10 mL). The most popular loops for large volume samples are made from 1/8” rely on our authorized OD Distributors tubing, making it impossible to connect these larger volume loops to your injection valve. The products in this catalog are intended for use with to provide value-added service and The solution: use our P-654 Adapter and appropriate fittings for your sample loop. analytical, biotechnology and the diagnostic equipment support of our products. While we are and accessories. THE MANUFACTURERS THE leads to your injection valve. This set-up allows connection of 1/8” OD sampleOFloop PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your order directly, we LIABILITY WHATSOEVER DUE TO ANY MISUSE encourage you to contact your local OF THEIR PRODUCTS. Of course, tubing the safe useto of low-pressure solenoid valves with Another potential application is connecting IDEX Health & Science Distributor. our products depends on our customers, since it is 1/4-28 flat-ottom ports. Most low-pressure valves of this type have very shallow threaded you who select and control the protective gear and ports, which typically preclude theused, useasof Fittings. However, by first threading safety procedures wellour as theFlangeless pressures, samples, and our P-671 Adapter intotemperatures, the valvesolvents, port(s), youventilation, can effectively use standard 1/4-28 fittings to other variables. Product and material performance connect your tubing into the backside of the adapter body. This also saves ”wear and tear” ratings are provided as guides only. Individual field on the threads in the valve ports. tests should be performed by customers to determine safe operating parameters given your particular procedures and use. IDEX Health & Science facilities are certified ISO 9001.

CONNECTORS

THREADED ADAPTERS

www.biotech.se

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

Metric Threaded Adapters Our versatile Metric Threaded Adapters are used specifically to effectively attach connectors with different threads. We designed these adapters to work with English to Metric threaded geometries. Manufactured from Stainless Steel, PEEK or Tefzel™ (ETFE) they deliver excellent solvent resistance.

idex-hs.com

0.49” (1.24 cm)

0.37” (0.94 cm) 0.92” (2.34 cm)

10-32

0.73” (1.85 cm)

10-32

+1 760 438 2131

M6 M6

P-920-01

P-626

0.040” (1.00 mm) thru-hole

0.020” (0.50 mm) thru-hole for 1/16” OD tubing Includes (1) F-300 0.37” (0.94 cm)

Optical Filters

Shutter Products

semrock.com

+1 585 244 7220 10-32

0.50” (1.27 cm)

0.93” (2.36 cm)

0.83” (2.11 cm)

P-670

P-650

0.030” (0.75 mm) thru-hole

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

TERMS

ORDERING INFORMATION FLUIDIC CONNECTIONS FLUIDICS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 65 2

5/16-24

For a complete distributor listing please visit www.idex-hs.com/ distributors or email: US: IHSOrders@idexcorp.com

0.83” (2.11 cm)

P-673

0.040” (1.00 mm) thru-hole

Europe: CustomerService.hsEurope@ idexcorp.com

Product purchased through a Distributor must be returned Asia: directly to that Distributor. Please CustomerService.hsAsia@ contact them for Return Material idexcorp.com Authorization procedures. For an alternative to the Female M6 Adapters presented above, try a P-602 or P-622 Low Our customer service team will help Pressure Metric Union from page 84, along with the appropriate Metric Flangeless Fittings you contact a distributor in your area. DIRECT FROM OUR GLOBAL

RELATED PRODUCTS

on page 43. DISTRIBUTION NETWORK

HOW TO FIND A LOCAL IDEX Health & Science has established To direct connect your tubing into a flat-bottom port, find the appropriate Flangeless DISTRIBUTOR FOR relationships with a global network or Super Flangeless™ Fittings on page 45 and page 39 respectively. SEMROCK PRODUCTS of Distributors that offer outstanding For a complete distributor listing product support and assistance. Need metric fittings forplease your connections? See page 43. visit www.semrock.com/ In order to meet our customer’s international-distributors.aspx needs, and the demands of being a global supplier, we have come to rely on our authorized Distributors The products in this catalog are intended for use with to provide value-added service and analytical, biotechnology and diagnostic equipment support of our products. While we are and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your order directly, we LIABILITY WHATSOEVER DUE TO ANY MISUSE encourage you to contact your local OF THEIR PRODUCTS. Of course, the safe use of IDEX Health & Science Distributor. our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular procedures and use. IDEX Health & Science facilities are certified ISO 9001.

CONNECTORS

THREADED ADAPTERS

OPTICS

TO FIND A LOCAL DISTRIBUTOR FOR FLUIDICS PRODUCTS

COLUMN HARDWARE

Returns must be authorized in advance. Please 1/4-28 contact us within 30 days of purchase for your Returns Material Authorization M6 (RMA) Number. A restocking fee may apply. To P-694 request a Return Materials Authorization formm) IDEX 0.040” (1.00 thru-hole Health & Science products visit www.idex-hs.com/return.

0.50” (1.27 cm)

0.90” (2.27 HOW cm)

DEGASSERS

ORDER PROCESSING/ SHIPPING

RETURN OF MATERIALS

VALVES

1/4-28

0.49” (1.24 cm)

FLUIDIC CONNECTIONS

Laser Products

FLUIDICS

Fluidics Products

www.biotech.se

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

2 66

Threaded Adapters (Cont.) National Pipe Thread Adapters

FLUIDICS

Fluidics Products

These adapters make connections to female 1/8” and 1/4” National Pipe Thread (NPT) ports.

idex-hs.com

Manufactured from PEEK polymer, our NPT Adapters are durable and chemically resistant. We provide versions with either 1/4-28 or 5/16-24 flat-bottom threads, suitable for most low pressure applications.

FLUIDIC CONNECTIONS

Please Note: Wrap the threads on the NPT side of these adapters with thread seal tape (plumber’s tape) to ensure a leak-free seal.

Laser RELATED PRODUCTS Products

0.70” (1.78 cm)

+1Replacement 760 438fittings 2131for these adapters Page(s) 1/4-28 for 1/8” OD tubing

5/16-24 for 1/8” OD tubing

41, 56

5/16-24 for 3/16” OD tubing

U-510

Optical Other tubing/fitting combinations are available. For more Filters information, please

Threaded Adapters ORDER PROCESSING/ SHIPPING

U-514

Shutter Products

1/8” NPT to 1/4-28 Flat-Bottom Female Adapter for 1/8” OD tubing Includes (1) XP-308 Fitting

1/8” NPT to 5/16-24 Flat-Bottom Female Adapter for 3/16” OD tubing Includes (1) XP-132 Fitting

+1 585 244 7220

VALVES DEGASSERS

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

COLUMN HARDWARE

0.70” (1.78 cm)

are located on the pages indicated below:

contact your local Distributor or semrock.com IDEX Health & Science directly.

OPTICS

0.56” (1.42 cm)

APPLICATION NOTE Our U-500 and U-510 NPT Adapters are great for attaching 1/8” OD fluoropolymer sparging lines to sparging gas tank regulating valves. Simply thread the appropriatelysized NPT Adapter into the valve’s receiving port and then attach your sparging tubing to the adapter body using the fittings provided.

RETURN OF MATERIALS

Returns must be authorized in advance. Please contact us within 30 days of purchase for your Returns Material Authorization (RMA) Number. A restocking fee may apply. To request a Return Materials Authorization for IDEX Health & Science products visit www.idex-hs.com/return.

Part No. Description Orders placed on our website process ENGLISH THREADED ADAPTERS and ship as specified during the Adapter, 5/16-24 C, M to 10-32 C, F 6000-076process. PEEK checkout Orders that are Product purchased through a PEEK 5/16-24 P-135 via fax/email placed will Adapter, be subject to FB, F to 1/4-28 F Distributor must be returned PEEKquantity Adapter,and 10-32 C, F to 1/4-28 FB, F aP-627 $100 minimum order directly to that Distributor. Please PCTFE Adapter, 5/16-24 FB, F to 1/4-28 FB, M P-681 process within typically one business contact them for Return Material Adapter,days. 1/2-20 FB, F to 1/4-28 FB, M P-684 day and ship withinPCTFE two business Authorization procedures. PCTFE Adapter, 5/16-24 FB, M to 1/4-28 FB, F P-718 Customers who have established PEEK Adapter, U-659 pricing terms contract must place5/16-24 FB, F to 1/2-20 FB, F DIRECT FROM OUR GLOBAL PEEKwith Adapter, U-665 orders directly catalog their 1/2-20 FB, F to 1/4-28 FB, F DISTRIBUTION NETWORK PEEK Adapter, 1/4-28 FB, F to 10-32 C, M P-652 Customer Service representative. IDEX Health Science PEEK Adapter, 1/4-28 FB, F to 10-32 C, M,& Extra Longhas established P-654 All shipments are FCA unless PEEK Adapter, 10-32 C, F to relationships 1/4-28 FB, M with a global network P-669-01 otherwise noted. For orders not of1/4-28 Distributors PTFE Adapter, 1/4-28 FB, F to FB, M that offer outstanding P-671 placed via our website, shipping product support and assistance. PEEK Adapter, 1/4-28 FB, F to 10-32 FB, M P-672 charges will be prepaid and added to In order to meet our customer’s METRIC M6 THREADED ADAPTERS the invoice. Or, if requested, we will needs, and the demands of being Adapter, 10-32 C, F to M6 FB, F P-626 charge your carrierPEEK account number. a global supplier, we have come to PEEK Adapter, M6 FB, F to 10-32 C, M Standard P-650 rely on our authorized Distributors PCTFE Adapter, M6 FB, F to 1/4-28 FB, M P-670 TERMS to provide value-added service and PCTFE Adapter, 5/16-24 FB, F to M6 FB, M P-673 support of our products. While we are Credit cards are accepted for orders PCTFE Adapter, 1/4-28 FB, F to M6 FB, M P-694 happy to take your order directly, we placed within the United States. PEEK Adapter, 10-32 C, F to M6 FB, M P-920-01 encourage you to contact your local Purchase orders may also be used by 1/8” MALE NATIONAL PIPE THREAD ADAPTERS IDEX Health & Science Distributor. qualified customers. No international Part No. Description Color Tubing OD credit card payment is possible. PEEK 1/8” NPT, M to 1/4-28 FB, F Adapter Red 1/8” U-510 No international shipments are PEEK 1/8” NPT, M to 5/16-24 FB, F Adapter Natural 3/16” U-514 possible. For terms and conditions 1/4” MALE NATIONAL PIPE THREAD ADAPTERS of sale please visit www.idex-hs.com/ PEEK 1/4” NPT, M to 1/4-28 FB, F Adapter Red 1/8” U-500 legal-notices. Terms and prices are PEEK 1/4” NPT, M to 5/16-24 FB, F Adapter Natural 3/16” U-504 subject to change without notice.

HOW TO FIND A LOCAL DISTRIBUTOR FOR FLUIDICS PRODUCTS

For a complete distributor listing please visit www.idex-hs.com/ distributors or email: US: IHSOrders@idexcorp.com

Includes

Thru-hole

Pressure Rating

Qty.

49.8 µL 4.1 µL (1) F-300 0.020” (0.50 mm) 0.30 µL Asia: N/ACustomerService.hsAsia@ 0.125" (3.20 mm) 96.6 µL N/Aidexcorp.com 0.130" (3.30 mm) 121.7 µL N/A 0.040" (1.00 mm) 10.3 µL Our customer service team will help (1) XU-655 Tapered** 42.0 µL you contact a distributor in your area. (1) XU-655 0.063” (1.60 mm) 6.6 µL N/A 0.030” (0.75 mm) 6.7 µL HOW TO FIND A LOCAL N/A 0.030” (0.75 mm) 9.5 µL DISTRIBUTOR FOR N/A 0.040” (1.00 mm) 6.6 µL SEMROCK PRODUCTS N/A 0.040” (1.00 mm) 8.0 µL For a complete distributor listing N/A 0.050” (1.25 mm) 11.4 µL

3,000 psi (207 bar) 1,000 psi (69 bar) 1,000 psi (69 bar) 1,000 psi (69 bar) 250 psi (17 bar) 1,000 psi (69 bar) 250 psi (17 bar) 250 psi (17 bar) 1,000 psi (69 bar) 1,000 psi (69 bar) 1,000 psi (69 bar) 1,000 psi (69 bar) 1,000 psi (69 bar)

ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea.

(1) F-300 0.020” (0.50 mm) 0.3 µL N/A 0.030” (0.75 mm) 6.7 µL N/AThe products in this catalog 0.030” mm) 2.6 µL are(0.75 intended for use with N/Aanalytical, biotechnology 0.040” (1.00 mm) 9.9 µL and diagnostic equipment N/Aand accessories. THE MANUFACTURERS 0.040” (1.00 mm)OF THE11.3 µL PRODUCTS IN THIS CATALOG SHALL HAVE NO N/A 0.040” (1.00 mm) 8.0 µL

1,000 psi (69 bar) 1,000 psi (69 bar) 1,000 psi (69 bar) 1,000 psi (69 bar) 1,000 psi (69 bar) 1,000 psi (69 bar)

ea. ea. ea. ea. ea. ea.

Pressure Rating 500 psi (34 bar) 500 psi (34 bar)

Qty. ea. ea.

500 psi (34 bar) 500 psi (34 bar)

ea. ea.

Europe: N/ACustomerService.hsEurope@ 0.066" (1.70 mm) N/Aidexcorp.com 0.080" (2.05 mm)

Swept Volume

please visit www.semrock.com/ international-distributors.aspx

LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of our products dependsThru-hole on our customers, since it isSwept Volume Includes you who select and control the protective gear and (1) XP-308 0.062” (1.60 mm) 17.3 µL safety procedures used, as well as the pressures, (1) temperatures, XP-132 (3.2 mm) and 70.4 µL solvents,0.125” samples, ventilation, other variables. Product and material performance are provided as guides only. Individual field (1) ratings XP-308 0.062” (1.60 mm) 17.3 µL tests should be performed by customers to determine (1) safe XP-132 0.125” operating parameters given(3.2 yourmm) particular 70.4 µL F = Female (internal) threads; M = Male (external) threads; XL = extra long; C = Coned; FB = Flat-Bottom procedures and use. IDEX Health & Science facilities * The pressure rating of this adapter exceeds the pressure holding ability of the fittings and tubing with areused certified ISOit. 9001.

** Thru-hole tapers from 0.188” (4.80 mm) to 0.125” (3.20 mm). ORDERING FLUIDIC CONNECTIONS FLUIDICS INFORMATION

IDX2398-1_Catalog.indb 66 IDX2398-1_Catalog-BioTech.indb 2

CONNECTORS

THREADED ADAPTERS

www.biotech.se

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

idex-hs.com

FLUIDIC CONNECTIONS

Mixing Tees utilize a specifically engineered internal geometry to efficiently mix two fluid streams into one combined stream. Mixing Tees are ideal for microbore or analytical gradient HPLC. These mixing tees are specifically designed for high pressure applications.

Laser Products +1 760 438 2131

FLUIDICS

High Pressure MıxingTees

Fluidics Products

Static Mixing Tees

O UT

0.67” (1.70 cm)

PEEK body with two-piece fingertight fittings

Low swept volume

Optical Filters

Shutter Products

semrock.com 1.10” (2.79 cm)

VALVES

Static Mixing Tees are ideal for microbore or analytical gradient HPLC. They have a low swept volume of 2.2 µL (includes frit volume) and are designed for flow rates of 0.5 to 3 mL/min and a maximum pressure of 5,000 psi (345 bar). The back pressure caused by the tee is typically only 10 to 20 psi (0.7 to 1.4 bar) at these flow rates. +1The585 244 are 7220 thru-holes 0.020” (0.50 mm) and the center port features a 10 µm UHMWPE or stainless steel frit that aids mixing.

U-466 and U-466S

Static Mixing Tees with F-300 Fingertight Fittings for 1/16” OD tubing

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

DISTRIBUTION NETWORK efficiently mix two fluid streams into one combined stream. The center port also HOW TOpolymer FIND A LOCAL IDEX Health & features Science hasaestablished 0.5 µm porosity PEEK frit to aid in mixing. This frit adds a maximum DISTRIBUTOR FOR relationships with a global network of 20 psi (1.4 bar) back pressure to most systems (within the stated flow rate range). SEMROCK PRODUCTS of Distributors that offer outstanding

The Tee handlesFor a maximum pressurelisting of 5,000 psi (345 bar) when directly a complete distributor product support andMixing assistance. please visit www.semrock.com/ connecting 1/16” OD tubing, or up to 4,000 psi (276 bar) with capillary tubing when In order to meet our customer’s ™ international-distributors.aspx needs, and theusing demands being ourof NanoTight Fittings and Tubing Sleeves (page 37). Inlet 2supplier, we have come to a global rely on our authorized Distributors The products in this catalog are intended for use with to provide value-added service and analytical, biotechnology and diagnostic equipment support of our products. While we are and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your order directly, we LIABILITY WHATSOEVER DUE TO ANY MISUSE encourage you to contact your local OF THEIR PRODUCTS. Of course, the safe use of IDEX Health & Science Distributor. our products depends on our customers, since it is

CONNECTORS

RELATED PRODUCTS

See our Vacuum Degassing Systems on page 154.

you who select and control the protective gear and safety procedures used, as well as the pressures,

Our standard Static Mixing Teessolvents, are designed for flow temperatures, samples, ventilation, and rates from 0.5 mL/min to 3 mL/min. other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular procedures and use. IDEX Health & Science facilities are certified ISO 9001.

HIGH PRESSURE MULTIPORT CONNECTORS

MIXING TEES

OPTICS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 67 2

Micro Static Mixing Tee Europe:

CustomerService.hsEurope@ Constructed and PCTFE Product purchased through a of inert PEEK idexcorp.com Distributor must be returned Asia: Low swept volume of 0.95 µL directly to that Distributor. Please CustomerService.hsAsia@ contact them for Return Material Designed for flow ratesidexcorp.com of 20–250 µL/min Authorization procedures. Our customer service team will help OurOUR Micro Static Mixingyou Tee utilizes a specifically engineered internal geometry to contact a distributor in your area. DIRECT FROM GLOBAL

Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by qualified customers. No international M-540 Micro Tee is 0.010” thru-hole with fittings creditStatic cardMixing payment possible. included (tubing and tubing sleeves not included) No international shipments are possible. For terms and conditions of sale please visit www.idex-hs.com/ legal-notices. Terms and prices are subject to change without notice.

ORDERING INFORMATION FLUIDICS FLUIDIC CONNECTIONS

US: IHSOrders@idexcorp.com

COLUMN HARDWARE

TERMS

distributors or email:

(RMA) Number. A restocking fee may apply. To request a Return Materials Authorization for IDEX Health & Science products visit Outlet www.idex-hs.com/return.

PEEK Frit Orders Inlet 1 placed on our website process and ship as specified during the checkout process. Orders that are placed via fax/email will be subject to a $100 minimum order quantity and typically process within one business day and ship within two business days. Customers who have established contract pricing terms must place catalog orders directly with their Customer Service representative.

Turbulent mixing of solvents increases outgassing. To maintain a bubble-free RETURN OF MATERIALS HOWoften TO FIND A LOCAL DISTRIBUTOR FOR fluid pathway, we recommend solvent degassing when using this product. Returns must be authorized in FLUIDICS PRODUCTS advance. Please contact us within Forour a complete distributor listing The incorporated into U-466 and U-466S Static Mixing Tees is not replaceable. 30 days of purchase forfrit your visit www.idex-hs.com/ If it becomes clogged, please the Mixing Tee must be replaced. Returns Material Authorization

DEGASSERS

ORDER PROCESSING/ SHIPPING

NOTE

www.biotech.se

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

2 68

High Pressure Mixing Tees (Cont.)

VALVES

FLUIDIC CONNECTIONS

FLUIDICS

APPLICATION NOTE

Fluidics Several researchers use our PEEK Products MicroTee to introduce ionizing voltage

to their fluid stream just prior to a Mass idex-hs.com Spectrometer1. MicroTees are well suited for this application due to advantageous internal geometry and PEEK polymer’s electrical resistance. The materials required for this setup are as follows: one gold or platinum conducting wire, one P-775 or P-875 MicroTee (this page), one MicroTight Tubing Sleeve (page 52) the conducting wire (as needed to +1for760 438 2131 accommodate wire diameter), and at least two more MicroTight Tubing Sleeves (page 52) to connect your capillary tubing.

Laser Products

MicroTee & Cross for Capillary Tubing Direct connect 1/16”, 1/32”, 360 µm OD tubing, plus other capillary tubing Low swept volume

Use our MicroTees and MicroCrosses to join capillary tubing. All of these products are made entirely of PEEK and have 0.006” (0.150 mm) thru-holes, with resulting swept volumes ranging from 29 to 81 nL.

NOTE Use only the ferrules supplied with each connector — they are not interchangeable. Replacement ferrules and female nuts are available on page 35. For MicroUnions, MicroTees, and MicroCrosses for UHPLC applications, see page 72.

To set up a similar connection, first thread your wire through the appropriate tubing sleeve, if necessary, with the wire extending beyond both ends of the sleeve. Slip the female nut included with the MicroTee over the wire or sleeved semrock.com +1 585 244 7220 wire, followed by the ferrule — ensuring the wire (and its sleeve) extends well 1.19” past the end of the ferrule tip. Align the (3.02 cm) tip of the wire with the thru-hole of the MicroTee and gently insert the wire until P-775 MicroTee for MicroTight® it bottoms out. Now finger tighten the Tubing Sleeves 0.006” thruFor your information, our U.S.Attach your flow with fittings included RETURN OFholes MATERIALS female nut into place. (tubing sleeves not included) Federal Taxpayer Identification Returns must be authorized in path tubing to the MicroTee’s two other number is 01-0736657; European advance. Please contact us within availableIdentification ports, following Taxpayer number the instructions 30 days of purchase for your provided with the MicroTee. is DE 146581180. Returns Material Authorization

Optical Filters

Shutter Products

OPTICS

COLUMN HARDWARE

DEGASSERS

(RMA) Number. A restocking fee

Begin fluid flow through the tee and ORDER PROCESSING/ may apply. To request a Return apply voltage to the conducting wire SHIPPING Materials Authorization for IDEX

lead. This setup provides Health & Science products visit Orders placed on ourtypically website process and ship as electrospray specified duringionization the effective in www.idex-hs.com/return. 1.19” checkout process. Orders that are applications having a flow rate of Product purchased through (3.02acm) placed via fax/email will be subject to Distributor must be returned 100 µL/min or greater. a $100 minimum order quantity and directly to that P-888 Distributor. Please 1 One such paper describing typically process within onepioneering business electrospray Returnfor Material MicroTee 360 µm OD work: Protein Identification at the Low Femtomolecontact Level them for day ship within twoUsing business tubing 0.006” thru-holes fromand Silver-Stained Gels a Newdays. Fritless Electrospray Authorization procedures. with fittings included Customers have established Interface forwho Liquid Chromatography-Microspray and Nanospray Mass Spectrometry. Christine L. Gatlin, Gerd R. contract pricing terms must place Kleemann, Lara G. Hays, Andrew J. Link, John R.DIRECT Yates III FROM OUR GLOBAL catalog orders directly with their (1998) Analytical Biochemistry 263, 93-101. DISTRIBUTION NETWORK Customer Service representative. IDEX Health & Science has established All shipments are FCA unless relationships with a global network otherwise noted. For orders not of Distributors that offer outstanding placed via our website, shipping product support and assistance. charges be prepaid and added to Part No.willDescription Threads In order to meet our customer’s the invoice. Or, if requested, we will STATIC MIXING TEE needs, and the demands of being charge yourPEEK carrier account number. Static Mixing Tee for 1/16” ODa Tubing, 10 µm we have come to global supplier, 10-32 Coned U-466 UHMWPE Frit rely on our authorized Distributors PEEK Static Mixing Tee for 1/16” OD Tubing, 10 µm SST Frit 10-32 and Coned U-466S TERMS to provide value-added service MICRO STATIC MIXINGfor TEE support of our products. While we are Credit cards are accepted orders PEEK Static Mixing Tee, for 1/16” ODto Tubing 5/16-24 Coned M-540 within happy take your order directly, we placed theMicro United States. MICROTEE, MICROCROSS AND encourage you to contact your local Purchase orders may also be used by MICROELBOW PEEK MicroTee for MicroTight Sleeves 5/16-24 Coned P-775 customers. IDEX Health & Science Distributor. qualified No international PEEK MicroCross for MicroTight Sleeves 5/16-24 Coned P-777card payment credit is possible. PEEK shipments MicroTee with 5/16-24 Coned P-875 No international areMounting Hole, for MicroTight Sleeves PEEK MicroTee for 1/32” OD Tubing 5/16-24 Coned P-885 possible. For terms and conditions PEEK for 1/32” OD Tubing 5/16-24 Coned P-887 of sale please visitMicroCross www.idex-hs.com/ PEEK MicroTee for 360are µm OD Tubing 5/16-24 Coned P-888 legal-notices. Terms and prices PEEK MicroCross for 360 µm OD Tubing 5/16-24 Coned P-889 to change subject without notice.

High Pressure Mixing Tees

P-890 P-891

PEEK MicroTee for 1/16” OD Tubing PEEK MicroCross for 1/16” OD Tubing

ORDERING FLUIDIC CONNECTIONS FLUIDICS INFORMATION

IDX2398-1_Catalog.indb 68 IDX2398-1_Catalog-BioTech.indb 2

CONNECTORS

5/16-24 Coned 5/16-24 Coned

1.19” (3.02 cm)

0.80” (2.03 cm) 1.19” (3.02 cm)

P-887

MicroCross for 1/32” OD tubing 0.006”

HOW TO FIND A LOCAL thru-holes with fittings included DISTRIBUTOR FOR FLUIDICS PRODUCTS For a complete distributor listing please visit www.idex-hs.com/ distributors or email: US: IHSOrders@idexcorp.com Europe: CustomerService.hsEurope@ idexcorp.com 0.80” Asia:(2.03 cm)

CustomerService.hsAsia@ idexcorp.com

1.19” (3.02 cm)

0.80” (2.03 cm)

P-890

MicroTee for 1/16” OD tubing 0.006” thru-holes with fittings included

Our customer service team will help you contact a distributor in your area.

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS For a complete distributor listing please visit www.semrock.com/ Includes Thru-hole

Swept Volume

Pressure Rating

Qty.

2.2 µL

5,000 psi (345 bar)

ea.

2.2 µL

5,000 psi (345 bar)

ea.

0.95 µL

5,000 psi (345 bar)

ea,

29 nL 38 nL 29 nL 29 nL 38 nL 29 nL 38 nL 58 nL 81 nL

4,000 psi (276 bar) 4,000 psi (276 bar) 4,000 psi (276 bar) 5,000 psi (345 bar) 5,000 psi (345 bar) 5,000 psi (345 bar) 5,000 psi (345 bar) 5,000 psi (345 bar) 5,000 psi (345 bar)

ea. ea. ea. ea. ea. ea. ea. ea. ea.

international-distributors.aspx (3) F-300

0.020” (0.50 mm)

products in this catalog are intended for use with (3)The F-300 0.020” (0.50 mm) analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE (3)PRODUCTS F-132/P-416 0.010” mm) IN THIS CATALOG SHALL(0.250 HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of (3) F-172, (3) P-416 0.006” (0.150 mm) our products depends on our customers, since it is (4)you F-172, (4) P-416 (0.150 mm) who select and control the0.006” protective gear and procedures used, as well0.006” as the pressures, (3)safety F-172, (3) P-416 (0.150 mm) solvents, samples, ventilation, and (3)temperatures, F-112, (3) P-416 0.006” (0.150 mm) other variables. Product and material performance (4)ratings F-112,are(4)provided P-416 as guides0.006” (0.150 field mm) only. Individual (3)tests F-152, (3) be P-416BLK (0.150 mm) should performed by 0.006” customers to determine operating parameters given your particular (4)safe F-152, (4) P-416BLK 0.006” (0.150 mm) procedures and use. IDEX Health & Science facilities (3) F-132, (3) P-416 0.006” (0.150 mm) are certified ISO 9001.

(4) F-132, (4) P-416

HIGH PRESSURE MULTIPORT CONNECTORS

0.006” (0.150 mm)

MIXING TEES

www.biotech.se

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

idex-hs.com

PEEK ZDV Unions

FLUIDICS

High Pressure Unıons

Fluidics Products

Bio-Inert UHPLC Unions

Laser Products

Unique, Patent-Pending Process allows a fully-PEEK fluid contact area combined with the strength of stainless steel

FLUIDIC CONNECTIONS

Our PEEK zero-dead-volume (ZDV) Unions come complete with two F-300 Fingertight Fittings for 1/16” OD tubing and are pressure rated to +15,000 760 2131 psi438 (344 bar).

Pressure rated to 17,400 psi (1,200 bar) Two inner diameters available: 0.008” and 0.016”

Optical Filters

Shutter Products

semrock.com 0.92” (2.34 cm)

0.31” (0.79 cm)

All shipments are FCA unless otherwise noted. For orders not placed via our website, shipping P-760 charges be prepaid and added to PEEK ZDVwill Union 0.050” thru-hole the invoice. Or,with if requested, we will F-300 Fittings charge your carrier account number.

TERMS

FLUIDICS PRODUCTS advance. Please contact us within Note: All-stainless steel For fittings should a complete distributor listing 30 days of purchase for your NOT be used with theseplease unions, as they visit www.idex-hs.com/ Returns Material Authorization distributors or email: will damage the internal conical seat. (RMA) Number. A restocking fee may apply. To request a Return Materials Authorization for IDEX Health & Science products visit ™ www.idex-hs.com/return.

Product purchased through aUnions improve idexcorp.com NanoTight capillary Distributor must be returned tubing connections in several Asia: ways. directly to that Distributor. Please CustomerService.hsAsia@ The internal design of the union contact them for Return Material idexcorp.com greatly reduces the incidence of tubing Authorization procedures. Our customer service team will help misalignment. When using 1/16” OD you contact in your area. DIRECT FROM OUR GLOBAL tubing sleeves (found on page 52)a distributor to

DISTRIBUTION NETWORK

connect capillary tubing, the webbed

HOW TO FIND A LOCAL IDEX Health & Science has established 0.83” thru-hole minimizes breaking of fused FOR DISTRIBUTOR (2.11 cm) relationships with a global network 10-32 SEMROCK PRODUCTS silica while adding only miniscule of Distributors that offer outstanding For are a complete product support and assistance. swept volume. The results fewer distributor listing please visit www.semrock.com/ In order to meet our customer’s blockages, fewer flow rate reductions 10-32 international-distributors.aspx needs, and the demands of being and fewer back pressure problems. P-779 a global supplier, we have come to 0.28” NanoTight Union (0.71 cm) rely on our authorized Distributors 0.005” thru-hole with The products in this catalog are intendedF-331N for use with Fittings to provide value-added service and analytical, biotechnology and diagnostic equipment support of our products. While we are and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your order directly, we LIABILITY WHATSOEVER DUE TO ANY MISUSE encourage you to contact your local OF THEIR PRODUCTS. Of course, the safe use of Threads Includes Thru-hole Swept Volume Pressure Rating IDEX Health & Science Distributor. our products depends on our customers, since it is 10-32 Coned 10-32 Coned 10-32 Coned 10-32 Coned

CONNECTORS

you who select and control the protective gear and N/Aprocedures used, 0.008” (0.20 0.05 µL safety as well as mm) the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance (2) F-300 0.020” (0.50 mm) 0.28 µL ratings are provided as guides only. Individual field (2) should F-300be performed 0.010” by (0.25 mm) to determine 0.07 µL tests customers safe particular (2)operating F-300 parameters 0.050”given (1.25your mm) 1.2 µL procedures and use. IDEX Health & Science facilities are certified ISO 9001.

(2) F-331N

0.005” (125 µm)

HIGH PRESSURE MULTIPORT CONNECTORS

8 nL

Qty.

17,400 psi (1,200 bar)

ea.

5,000 psi (344 bar) 5,000 psi (344 bar) 5,000 psi (344 bar)

ea. ea. ea.

5,000 psi (344 bar)

ea.

HIGH PRESSURE UNIONS www.biotech.se

OPTICS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 69 2

US: IHSOrders@idexcorp.com

Europe: NanoTight Union CustomerService.hsEurope@

PEEK NanoTight Union for 1/16” OD Tubing and Tubing Sleeves 10-32 Coned

ORDERING INFORMATION FLUIDICS FLUIDIC CONNECTIONS

Bio-Inert UHPLC Union 0.008” thru-hole for 1/16” OD tubing

Neither union comes with fittings, but can be paired successfully with any coned fitting that HOW uses aTO polymer RETURN OF10-32 MATERIALS FIND A LOCAL nose or ferrule. DISTRIBUTOR FOR Returns must be authorized in

Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by Part No. customers. Description qualified No international BIO-INERT UHPLCisUNIONS credit card payment possible. Bio-Inert UHPLC Union for 1/16” OD Tubing, Natural (Tan) UP-700 No international shipments are PEEK ZDV possible. ForUNIONS terms and conditions Union for 1/16” OD Tubing P-704 of sale please PEEK visit www.idex-hs.com/ PEEK Union for 1/16” P-742 legal-notices. Terms and prices areOD Tubing PEEKwithout Union for 1/16” OD Tubing P-760 to change subject notice. NANOTIGHT UNION P-779

0.35” (0.90 cm)

COLUMN HARDWARE

Orders placed on our website process and ship as specified during the checkout process. Orders that are P-704 placed via fax/email will be subject to PEEK ZDV Union a $100thru-hole minimum order quantity and 0.020” with F-300 Fittings typically process within one business day and ship within two business days. 0.31” Customers who have established (0.79 cm) contract pricing terms must place 0.92” catalog orders directly (2.34with cm) their Customer Service representative.

UP-700

DEGASSERS

ORDER PROCESSING/ 0.92” SHIPPING (2.34 cm)

0.86” (2.17 cm)

VALVES

0.31” (0.79 cm)

For your information, our U.S. P-742 Federal Taxpayer Identification PEEK ZDV Union number is 01-0736657; European 0.010” thru-hole with F-300 Fittings Taxpayer Identification number is DE 146581180.

These unions are specifically engineered for Bio-Inert UHPLC applications. Combining the physical strength of 316 stainless steel with the inertness and biocompatibility of an all-PEEK fluid these7220 unions will work well +1pathway, 585 244 in applications where pressures reach up to 17,400 psi (1,200 bar) — without allowing metal contact by the fluid.

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

2 70

High Pressure PEEK Tees & Crosses

FLUIDICS

Fluidics Products idex-hs.com

Laser Products

Eliminates loosening of fittings due to tubing twist

for Tubing Assemblies +1 Excellent 760 438 2131

Shutter Products

semrock.com

+1 585 244 7220

DEGASSERS COLUMN HARDWARE

1.08” (2.74 cm)

P-729 PEEK Cross 0.020” thru-hole with F-300 Fittings

0.020” thru-hole with F-300 Fittings

RETURN OF MATERIALS

PEEK 7-Port Manifold

DISTRIBUTION NETWORK

TERMS Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by qualified customers. No international credit card payment is possible. Partinternational No. Description No shipments are PEEK TEES AND and CROSSES possible. For terms conditions Tee for 1/16” OD Tubing P-727 of sale please PEEK visit www.idex-hs.com/ PEEK Tee forprices 1/16” are OD Tubing P-728 legal-notices. Terms and PEEKwithout Cross fornotice. 1/16” OD Tubing P-729 to change subject PEEK MANIFOLD

HOW TO FIND A LOCAL IDEX Health & ScienceSide has established View Top View DISTRIBUTOR FOR relationships with a global network SEMROCK PRODUCTS of Distributors that offerP-170 outstanding For athru-holes complete distributor listing product support and assistance. PEEK 7-Port Manifold 0.020” with F-331 Fittings please visit www.semrock.com/ In order to meet our customer’s international-distributors.aspx needs, and the demands of being a global supplier, we have come to rely on our authorized Distributors The products in this catalog are intended for use with to provide value-added service and analytical, biotechnology and diagnostic equipment support of our products. While we are and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your order directly, we LIABILITY WHATSOEVER DUE TO ANY MISUSE encourage you to contact your local OF THEIR PRODUCTS. Of course, the safe use of IDEX Health & Science Distributor. our products depends on our customers, since it is

PEEK 7-Port Manifold for 1/16” OD Tubing

IDX2398-1_Catalog.indb 70 IDX2398-1_Catalog-BioTech.indb 2

HOW TO FIND A LOCAL

DISTRIBUTOR FOR Returns must be authorized in FLUIDICS PRODUCTS advance. Please contact us within For a complete distributor listing 30 days of purchase for your Combine several streams intovisit one or split one fluid stream into several. This PEEK 7-Port please www.idex-hs.com/ Returns Material Authorization Manifold comes complete with F-331 Fingertight Fittings for 1/16” OD tubing and offers distributors or email: (RMA) Number. A restocking fee a pressure rating of 5,000 may apply. To request a Return US:psi (345 bar). Seal unused ports with any of our polymer 10-32 Materials Authorization for IDEXon page 55. coned plugs IHSOrders@idexcorp.com Health & Science products visit 0.75” Europe: (1.91 cm) www.idex-hs.com/return. CustomerService.hsEurope@ 0.96” a Product purchased through idexcorp.com (2.44 cm) Distributor must be returned Asia: directly to that Distributor. Please CustomerService.hsAsia@ 0.96” contact them for Return Material 0.66” (2.44 cm) idexcorp.com (1.68 cm) Authorization procedures. 0.38” Our customer service team will help (0.97 cm) you contact a distributor in your area. DIRECT FROM OUR GLOBAL

ORDER PROCESSING/ SHIPPING

ORDERING FLUIDIC CONNECTIONS FLUIDICS INFORMATION

0.67” (1.70 cm)

Mounting Hole

P-727 PEEK Tee

P-170

1.09” (2.77 cm)

0.49” (1.24 cm)

Optical Filters

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

OPTICS

Our PEEK Tees and Crosses include high pressure F-300 PEEK Fingertight Fittings — allowing maximum operating pressures to 3,500 psi (241 bar) when used with 1/16” OD PEEK or stainless steel tubing.

0.71” (1.80 cm)

Holds tight even through vibration

VALVES

FLUIDIC CONNECTIONS

Highest pressure holding flat-bottom fitting system we offer

CONNECTORS

Threads

Includes

10-32 Coned 10-32 Coned 10-32 Coned

(3) F-300 (3) F-300 (4) F-300

10-32 Coned

(7) F-331

you who select and control the protective gear and Thru-hole Swept Volume safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance 0.020” (0.50 mm) 0.57 µL ratings are provided as guides only. Individual field 0.050” (1.25bymm) 3.0 tests should be performed customers to µL determine safe operating0.020” parameters given your particular (0.50 mm) 0.72 µL procedures and use. IDEX Health & Science facilities are certified ISO 9001.

0.020” (0.50 mm)

HIGH PRESSURE MULTIPORT CONNECTORS

2.2 µL

PEEK TEES & CROSSES

Pressure Rating

Qty.

3,500 psi (241 bar) 3,500 psi (241 bar) 3,500 psi (241 bar)

ea. ea. ea.

5,000 psi (345 bar)

ea.

www.biotech.se

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

idex-hs.com

MicroTight® Connectors for Capillary Tubing

Laser Products

The Conductive MicroTight Union manufactured by IDEX Health & Science provides an excellent opportunity to +1introduce 760 438 2131 voltage into an electrospray or capillary electrophoresis system. With an extremely low internal volume of 16 nL, this union can be placed inline with 360 μm OD capillary tubing. Mount and apply voltage to these unions using our Insulating Mounting Bracket below.

Optical Filters

Connect two pieces of capillary tubing with our PEEK MicroTight Connectors. The True ZDV Unions allow two pieces of tubing to connect directly to each other — using the included gauge plug to ensure proper alignment. The standard union and elbow both feature a 0.006” (0.150 mm) thru-hole, adding only a small amount of additional flow-path volume to help ensure proper chromatographic results.

semrock.com

0.76” (1.93 cm)

6-32

Shutter Products

6-32

P-720

0.76” (1.93 cm)

MicroTight True ZDV Union for use with MicroTight Sleeves with fittings and gauge plug included

0.25” (0.64 cm)

+1 585 244 7220

P-771

VALVES

0.76” (1.93 cm)

6-32

0.38”

FLUIDIC CONNECTIONS

Conductive MicroTight Union

For your information, our (0.97 U.S. cm) Federal Taxpayer Identification M-572 Conductive Union for 360 number is MicroTight 01-0736657; European µm OD tubing with fittings and Capsule Taxpayer Identification number Union included is DE 146581180.

FLUIDICS

High Pressure MıcroTight Unions

Fluidics Products

6-32

RETURN OFMicroTight MATERIALS True ZDV Union

forauthorized 1/32” OD tubing Returns must be in with fittings and gauge plug included

HOW 0.25” TO FIND A LOCAL (0.64 cm) DISTRIBUTOR FOR FLUIDICS PRODUCTS

DEGASSERS

APPLICATION NOTE

COLUMN HARDWARE

RELATED PRODUCTS

M-572

Conductive Union for 360 µm OD Tubing, PEEK/SST 5/16-24 Coned

ORDERING INFORMATION FLUIDIC CONNECTIONS FLUIDICS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 71 2

CONNECTORS

Swept Volume

Pressure Rating

Qty.

N/A N/A 5 nL 20 nL

4,000 psi (276 bar) 5,000 psi (345 bar) 5,000 psi (345 bar) 4,000 psi (276 bar)

ea. ea. ea. ea.

N/A

ea.

5,000 psi (345 bar)

ea.

(2) F-152, (2) P-416BLK, (1) M-128NF 0.011” (0.279 mm) 16 nL

HIGH PRESSURE MULTIPORT CONNECTORS

MICROTIGHT UNIONS

www.biotech.se

OPTICS

advance. Please contact us within For a complete distributor listing 30 days of purchase for your please visit www.idex-hs.com/ Returns Material Authorization 0.81” distributors (RMA) Number. A restocking fee (2.06 cm)or email: 5/16-24 ORDER PROCESSING/ may apply. To request a Return US: SHIPPING Materials Authorization for IDEX IHSOrders@idexcorp.com Orders placed on our website process Health & Science products visit Europe: and ship as specified during the www.idex-hs.com/return. For an example of using a Conductive 5/16-24 CustomerService.hsEurope@ 0.31” checkout process. Orders are P-772 MicroTight Union in athat pressure driven ion (0.79 cm) Product purchased through a idexcorp.com MicroTight Union for 360 µm placed via fax/email will be subject to 0.44” Distributor must betubing returned preconcentration application see: “SelfOD with fittings included a $100 minimum order quantity and (1.12 cm) Asia: directly to that Distributor. Please Sealed Vertical Polymeric Nanoporous typically process within one business CustomerService.hsAsia@ contact them for Return Material Junctions High day and shipfor within two Throughput business days. idexcorp.com Authorization procedures. Customers whoApplications.“ have established Nanofluidic Our customer service team will help contract pricing terms must place you contact a distributor in your area. DIRECT FROM OUR GLOBAL Sun Jae Kim and Jong Yoon Han. catalog orders directly withAnalytical their Chem. DISTRIBUTION NETWORK 2008, 80: 3507-3511. Customer Service representative. HOW TO FIND A LOCAL IDEX Health & Science has established 1.00” All shipments are FCA unless DISTRIBUTOR FOR relationships with a 0.81” global network (2.54 cm) SEMROCK PRODUCTS (2.06 cm) otherwise noted. For orders not 0.31” of Distributors that offer outstanding (0.79 cm) placed via our website, shipping For a complete distributor listing 0.125” (0.32 cm) product support and assistance. hole diameter charges will be prepaid and added to please visit www.semrock.com/ In order to meet our customer’s the invoice. Or, if requested, we will international-distributors.aspx needs, and theP-874 demands of being Easily integrate the Conductive MicroElbow MicroTight Tubing Sleeves charge your carrier account number. MicroTight a global supplier, we have for come to with fittings included Union into your system with our Insulating rely on our authorized Distributors The products in this catalog are intended for use with Mounting Bracket, shown on page 79. TERMS to provide value-added service and analytical, biotechnology and diagnostic equipment support of our products. While we are Credit cards are accepted for orders and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your order directly, we placed within the United States. LIABILITY WHATSOEVER DUEThru-hole TO ANY MISUSE Part No. Description Threads Includes encourage you to contact your local Purchase orders may also be used by OF THEIR PRODUCTS. Of course, the safe use of MICROTIGHT UNIONS IDEX Health & Science Distributor. qualified customers. No international our products depends on our customers, since it is True is ZDV Union for MicroTight Sleeves 6-32 Coned (2) F-125, (1) P-553 P-720 card PEEK credit payment possible. you who select and control theN/A protective gear and PEEK True ZDV Union for 1/32” OD Tubing 6-32 Coned (2) F-126S, (1) P-553procedures used, as wellN/A P-771 safety as the pressures, No international shipments are temperatures, solvents, samples, ventilation, andmm) PEEK Union for 360 µm OD Tubing 5/16-24 Coned (2) F-152, (2) P-416BLK 0.006” (0.150 P-772 possible. For terms and conditions other variables. Product and material performance PEEK MicroElbow for MicroTight Sleeves 5/16-24 Coned (2) F-172, (2) P-416 0.006” (0.150 mm) P-874 of sale please visit www.idex-hs.com/ ratings are provided as guides only. Individual field REPLACEMENT GAUGE PLUGS OUR P-720 ANDbyP-771 UNIONS) should be performed customers to determine legal-notices. Terms and prices are (TO ACHIEVE TRUE ZDV CONNECTIONS WITHtests ® safe operating parameters given your particular Gauge Plug, Delrin 6-32 Coned N/A N/A P-553 subject to change without notice. procedures and use. IDEX Health & Science facilities CONDUCTIVE MICROTIGHT UNIONS are certified ISO 9001.

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

2 72

FLUIDICS

idex-hs.com

Laser Products

These 316 stainless steel connectors come complete with 10-32 stainless steel fittings for use with 1/16” OD tubing and are rated to 20,000 psi (1,380 bar). They are compatible with any 10-32 coned threaded fittings.

+1 760 438 2131

0.60” (1.52 cm)

Shutter Products

semrock.com

+1 585 244 7220

DEGASSERS COLUMN HARDWARE

0.89” (2.26 cm)

U-428 Stainless Steel Tee

U-430 Stainless Steel Cross

0.020” thru-hole with U-400 and U-401 Fittings

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

OPTICS

0.89” (2.26 cm)

Optical Filters

VALVES

FLUIDIC CONNECTIONS

High Pressure Stainless Steel Tees & Crosses

Fluidics Products

TERMS

RETURN OF MATERIALS

U-430 U-431

IDX2398-1_Catalog.indb 72 IDX2398-1_Catalog-BioTech.indb 2

For a complete distributor listing please visit www.idex-hs.com/ distributors or email: US: IHSOrders@idexcorp.com Europe: CustomerService.hsEurope@ idexcorp.com

Product purchased through a Distributor must be returned directly to that Distributor. Please contact them for Return Material Authorization procedures.

Asia: CustomerService.hsAsia@ idexcorp.com

DIRECT FROM OUR GLOBAL DISTRIBUTION NETWORK IDEX Health & Science has established relationships with a global network of Distributors that offer outstanding product support and assistance. In order to meet our customer’s needs, and the demands of being a global supplier, we have come to rely on our authorized Distributors to provide value-added service and support of our products. While we are happy to take your order directly, we encourage you to contact your local IDEX Health & Science Distributor.

Stainless Steel Cross for 1/16” OD Tubing Stainless Steel Cross for 1/16” OD tubing

ORDERING FLUIDIC CONNECTIONS FLUIDICS INFORMATION

HOW TO FIND A LOCAL DISTRIBUTOR FOR FLUIDICS PRODUCTS

Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by qualified customers. No international credit card payment is possible. No international shipments are Part No. For terms Description possible. and conditions VHP FOR OD TUBING of saleTEE please visit1/16” www.idex-hs.com/ Stainless Steel Tee for U-428 legal-notices. Terms and prices are1/16” OD Tubing Stainless Steelnotice. Tee for 1/16” OD Tubing U-429 to change subject without

CONNECTORS

0.020” thru-hole with U-400 and U-401 Fittings

Our customer service team will help you contact a distributor in your area.

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS For a complete distributor listing please visit www.semrock.com/ international-distributors.aspx

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures,Thru-hole solvents, samples, ventilation, andVolume Swept other variables. Product and material performance ratings are provided as guides only. Individual field (3) U-401 0.020” (0.50bymm) 0.57 µL tests should be performed customers to determine safe operating0.040” parameters given your particular (3) U-401 (1.00 mm) 2.1 µL procedures and use. IDEX Health & Science facilities (4) U-401 0.020” (0.50 mm) 0.72 µL are certified ISO 9001.

Threads

Includes

10-32 Coned 10-32 Coned 10-32 Coned 10-32 Coned

(3) U-400, (3) U-400, (4) U-400, (4) U-400, (4) U-401

0.040” (1.00 mm)

HIGH PRESSURE MULTIPORT CONNECTORS

2.5 µL

Pressure Rating

Qty.

20,000 psi (1,380 bar) 20,000 psi (1,380 bar) 20,000 psi (1,380 bar) 20,000 psi (1,380 bar)

ea. ea. ea. ea.

www.biotech.se STAINLESS STEEL TEES & CROSSES

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

idex-hs.com Supplied with fittings for 1/16” OD or 1/8” OD tubing

Our high pressure, zero-dead-volume (ZDV) unions are precision machined from 316 stainless steel, carefully passivated, then thoroughly rinsed. Each comes complete with stainless steel nuts and ferrules.

0.31” (0.79 cm)

or higher +1 (1,380 760 bar) 438 2131

FLUIDIC CONNECTIONS

Laser Products All union assemblies rated to 20,000 psi Manufactured from 316 stainless steel

FLUIDICS

VHP Stainless Steel ZDV Unions

Fluidics Products

0.31” (0.79 cm) 0.84” (2.13 cm)

0.84” (2.13 cm)

NOTE It is possible to order the products on this page without the fittings. Simply use a -01 at the end of the product number to order the union body without fittings.

Optical Filters

Shutter Products

semrock.com

+1 585 244 7220

U-402

U-435

ZDV Union 0.020” thru-hole for 1/16” OD tubing

ZDV Union 0.010” thru-hole for 1/16” OD tubing 0.38” (0.97 cm) 1.20” (3.05 cm)

VALVES

0.31” (0.79 cm) 0.84” (2.13 cm)

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

NanoTight™ Union Product purchased 0.007”through thru-holea forbe 1/16” OD tubing Distributor must returned

directly to that Distributor. Please contact them for Return Material Authorization procedures.

DIRECT FROM OUR GLOBAL DISTRIBUTION NETWORK

1593

For a complete distributor listing please visit www.idex-hs.com/ distributors or email: US: IHSOrders@idexcorp.com Europe: UH-402 CustomerService.hsEurope@ VHP+ Union idexcorp.com 0.010” thru-hole for 1/16” OD tubing

Asia: CustomerService.hsAsia@ idexcorp.com 0.31” Our customer service team will help (0.79 cm) you contact a distributor in your area.

1.02” (2.59 cm)

U-412

Stainless Steel Union for 1/16” OD Tubing

ORDERING INFORMATION FLUIDICS FLUIDIC CONNECTIONS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 73 2

CONNECTORS

10-32 Coned

(2) U-410/U-401

0.020” (0.50 mm)

ULTRA HIGH PRESSURE MULTIPORT CONNECTORS

0.10 µL

Pressure Rating

Qty.

20,000 psi (1,380 bar) 20,000 psi (1,380 bar) 20,000 psi (1,380 bar) 20,000 psi (1,380 bar) 20,000 psi (1,380 bar) 30,000 psi (2,070 bar)

ea. ea. ea. ea. ea. ea.

20,000 psi (1,380 bar)

ea.

20,000 psi (1,380 bar)

ea.

www.biotech.se VHP STAINLESS STEEL ZDV UNIONS

OPTICS

HOW TO FIND A LOCAL IDEX Health & Science has established DISTRIBUTOR FOR relationships with a global network SEMROCK PRODUCTS of Distributors that offer outstanding For a complete distributor listing product support and assistance. please U-322 U-412 visit www.semrock.com/ In order to meet our customer’s ® (Valco)of Compatible Waters Compatible international-distributors.aspx needs, and theVICI demands being ZDV Union 0.020” thru-hole ZDV Union 0.020” thru-hole a global supplier, have for we 1/16” ODcome tubingto for 1/16” OD tubing rely on our authorized Distributors The products in this catalog are intended for use with TERMS to provide value-added service and analytical, biotechnology and diagnostic equipment Part No. Thru-hole Swept Volume support of ourThreads products. WhileIncludes we are Credit cardsDescription are accepted for orders and accessories. THE MANUFACTURERS OF THE VHP STAINLESS STEEL ZDV UNIONS happy to take your order directly, we PRODUCTS IN THIS CATALOG SHALL HAVE NO placed within the United States. TO ANY MISUSE Stainless for 1/8” 1/4-28 Conedyour (2)local C-235/C-236 LIABILITY WHATSOEVER DUE 0.050” (1.25 mm) 1.48 µL 1593 encourage you to contact Purchase orders maySteel alsoUnion be used by OD Tubing the safe use of Stainless Steel Union for 1/16” OD Tubing Coned (2) U-400/U-401 OF THEIR PRODUCTS. Of course, 0.020” (0.50 mm) 0.13 µL U-402 customers. IDEX Health &10-32 Science Distributor. qualified No international our products depends on our customers, since it is Stainless Steel Union for 1/16” OD Tubing 10-32 Coned (2) U-400/U-401 you who select and control the 0.007” (178gear µm) U-411card payment credit is possible. protective and 13 nL Stainless Steel Union 10-32 Coned (2) U-400/U-401 safety procedures used, as well 0.010” mm) 20 nL U-435 as the (0.25 pressures, No international shipments are for 1/16” OD Tubing temperatures, solvents, samples, ventilation, and Stainless Steelconditions Union for 1/16” OD Tubing 10-32 Coned (2) U-400/U-401, (1) P-554 Gauge Plug 0.067” (1.70 mm) Near 0 µL U-438 possible. For terms and other variables. Product and material performance VHP+ Steel Union for 1/16” OD Tubing 10-32 Coned (2) VHP-200 0.010” (0.25 mm) 20 nL UH-402 of sale please visitStainless www.idex-hs.com/ ratings are provided as guides only. Individual field VICI (VALCO) COMPATIBLE ZDV UNION tests should be performed by customers to determine legal-notices. Terms and prices are your (0.50 particular Stainless Steel Union for 1/16” OD Tubing 10-32 Coned (2) U-320/U-321 safe operating parameters given 0.020” mm) 0.15 µL U-322 to change subject without notice. procedures and use. IDEX Health & Science facilities WATERS® COMPATIBLE ZDV UNION are certified ISO 9001. All shipments are FCA unless otherwise noted. For orders not placed via our website, shipping charges will be prepaid and added to the invoice. Or, if requested, we will charge your carrier account number.

COLUMN HARDWARE

U-438

True ZDVTO Union ZDV Union HOW FIND A LOCAL 0.067” thru-hole 0.050” thru-hole DISTRIBUTOR FOR for 1/16” OD tubing for 1/8” OD tubing FLUIDICS PRODUCTS

DEGASSERS

ORDER PROCESSING/ SHIPPING

RETURN OF MATERIALS

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

2 74

FLUIDICS FLUIDIC CONNECTIONS

VHP Tees & Crosses

Fluidics Products idex-hs.com

Our VHP Stainless Steel Tees and Crosses are precision machined from durable stainless steel. It is mechanically designed for bringing together three or four pieces of tubing. Our VHP Tees & Crosses have an extremely high pressure rating of 30,000 psi (2070 bar).

Laser Products

VHP Tees & Crosses for Capillary Tubing

1.19”

cm) +1 760(3.02 438 2131

0.80” (2.03 cm)

Direct-connect either 360 µm or 1/32” OD tubing — no sleeves required!

UH-700

VHP MicroTee for 1/32” OD tubing with fittings included

Available in both tee and cross configurations Pressure rated to 15,000 psi (1,034 bar)

Optical Filters 1.19” (3.02 cm)

Shutter Products

semrock.com 0.80”

VALVES

(2.03 cm)

UH-750

DEGASSERS COLUMN HARDWARE

Included with the MicroTees and MicroCrosses are the VHP MicroFerrules found on page 59. The P-278 Extender Tool on page 33 can be used to tighten the female nuts that are included with these connectors.

VHP MicroTee for 360 µm OD tubing with fittings included

For your information, our U.S. 1.19” Federal Taxpayer Identification (3.02 cm) number is 01-0736657; European Taxpayer Identification number is DE 146581180.

OPTICS

To help facilitate multi-port connections in UHPLC applications, our experts have developed a line of MicroTees and MicroCrosses, manufactured from stainless steel and featuring small thru-holes and very low internal volume. Additionally, the stainless +1steel 585 244 7220 construction allows these products to be used in applications where electrical conductivity is desired.

ORDER PROCESSING/ SHIPPING Orders placed on our website process and ship as specified during the 1.19” (3.02 cm) checkout UH-752 process. Orders that are VHP MicroCross placed via fax/email will be subject to 360 µm OD tubing afor $100 minimum order quantity and with fittings included typically process within one business day and ship within two business days. Customers who have established contract pricing terms must place catalog orders directly with their Customer Service representative.

RETURN OF MATERIALS

HOW TO FIND A LOCAL

APPLICATION NOTE

DISTRIBUTOR FOR Returns must be authorized in FLUIDICS PRODUCTS advance. Please contact us within For a complete distributor listing 30 days of purchase for your Why 1/32” OD Tubing and 360 µm OD Tubing? please visit www.idex-hs.com/ Returns Material Authorization distributors or strongly email: Healthfee & Science has focused on the development of a variety of connectors (RMA) Number.IDEX A restocking may apply. To request a Return for 1/32” and accessories OD tubing and 360 µm OD tubing. We have focused on these US: Materials Authorization IDEXdue to theirIHSOrders@idexcorp.com specificfor sizes overwhelming popularity in analytical instruments, especially Health & Science products visit Europe: where micro and nano-scale analyses are being performed. By creating products designed www.idex-hs.com/return. CustomerService.hsEurope@ for these popular sizes, the overall connection is easier to make and generally holds to Product purchased through a increased pressures overidexcorp.com connections where tubing sleeves are involved. Distributor must be returned Asia: directly to that Distributor. Please CustomerService.hsAsia@ contact them for Return Material idexcorp.com Authorization procedures. Our customer service team will help you contact a distributor in your area. DIRECT FROM OUR GLOBAL

VHP Tee for 1/16” OD Tubing

IDEX Health & Science offers this Very High Pressure (VHP) Tee Connector, designed to bring three pieces of tubing together. The all-316 stainless steel connector is designed

DISTRIBUTION NETWORK

HOW TO FIND A LOCAL IDEX Health & Science has established All shipments are FCA unless DISTRIBUTOR FORto 30,000 psi (2,070 bar). fora 1/16” OD tubing and is pressure rated relationships with global network SEMROCK PRODUCTS otherwise noted. For orders not of Distributors that offer outstanding placed via our website, shipping For a complete distributor listing product support and assistance. charges will be prepaid and added to please visit www.semrock.com/ In order to meet our customer’s the invoice. Or, if requested, we will international-distributors.aspx needs, and the demands of being 0.89”carrier account number. charge your a global supplier, we have come to (2.26 cm) rely on our authorized Distributors 0.60” The products in this catalog are intended for use with TERMS (1.52 cm) to provide value-added service and analytical, biotechnology and diagnostic equipment UH-427 support of our products. While we are Credit cards are accepted for orders and accessories. THE MANUFACTURERS OF THE VHP Tee for 1/16”within OD tubing PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your order directly, we placed the United States. with fittings included LIABILITY WHATSOEVER DUE TO ANY MISUSE encourage you to contact your local Purchase orders may also be used by OF THEIR PRODUCTS. Of course, the safe use of IDEX Health & Science Distributor. qualified customers. No international our products depends on our customers, since it is credit card payment is possible. you who select and control the protective gear and Part No. Description Threads Includes Thru-hole Pressure Rating safety procedures used, as well as the pressures, Swept Volume No international shipments are temperatures, solvents, samples, ventilation, and VHP TEEFor FOR 1/16” TUBING possible. terms andOD conditions other variables. Product and material performance VHPwww.idex-hs.com/ Tee for 1/16” OD Tubing, SST 10-32 Coned (3) VHP-200 0.020” (0.50 mm) 0.57 µL 30,000 psi (2,070 bar) UH-427 of sale please visit ratings are provided as guides only. Individual field VHP TEES &Terms CROSSES FOR are CAPILLARY TUBING tests should be performed by customers to determine legal-notices. and prices safe operating given your particular VHPwithout MicroTeenotice. for 1/32” OD Tubing, PEEK/SST 5/16-24 Coned (3) PK-112, (3) P-416parameters 0.010” (0.25 mm) 84 nL 15,000 psi (1,034 bar) UH-700to change subject procedures and use. IDEX Health & Science facilities 0.010” (0.25 mm) 84 nL are certified ISO 9001.

UH-750

VHP MicroTee for 360 µm OD Tubing, PEEK/SST

5/16-24 Coned

(3) PK-152, (3) P-416BLK

UH-752

VHP MicroCross for 360 µm OD Tubing, PEEK/SST

5/16-24 Coned

(4) PK-152, (4) P-416BLK

ORDERING FLUIDIC CONNECTIONS FLUIDICS INFORMATION

IDX2398-1_Catalog.indb 74 IDX2398-1_Catalog-BioTech.indb 2

CONNECTORS

0.010” (0.25 mm)

ULTRA HIGH PRESSURE MULTIPORT CONNECTORS

101 nL

Qty. ea.

15,000 psi (1,034 bar)

ea. ea.

15,000 psi (1,034 bar)

ea.

www.biotech.se VHP TEES & CROSSES

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

VHP MicroTight Unions

idex-hs.com Featuring stainless steel bodies and PK/PEEK fittings

tubing and 360 µm OD tubing

+1 760 438 2131

Optical Filters semrock.com

TERMS

ORDERING INFORMATION FLUIDIC CONNECTIONS FLUIDICS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 75 2

ports.7220 The union (UH-632) features a true ZDV (zero dead volume) connection +1threaded 585 244 between both tubes. This unique product is coupled with our one-piece Ultra-High Performance Fingertight fittings manufactured from our proprietary PEEK polymer blend, allowing them to be used in high temperature applications (up to 200 ºC) at pressures up to 6,000 psi (414 bar) — or use these connectors at room temperature up to 15,000 psi (1,034 bar)!

The 1959-01 is a new VHP union designed to accept the popular M4x0.7 threaded HOW TO FIND A LOCAL fittings for 1/32” OD tubing. These unions DISTRIBUTOR FOR will work nicely with both the VHP-900 Returns must be authorized in fittings (found on page 59) as well as the reusable VHP-920 (found on page 60). FLUIDICS PRODUCTS advance. Please contact us within RETURN OF MATERIALS

30 days of purchase for your Returns Material Authorization (RMA) Number. A restocking fee may apply. To request a Return Materials Authorization for IDEX1.24” Health & Science products visit (3.15 cm) www.idex-hs.com/return. Product purchased through a Distributor must be returned directly to that Distributor. Please contact them for Return Material Authorization procedures. UH-432

For a complete distributor listing please visit www.idex-hs.com/ distributors or email: US: IHSOrders@idexcorp.com

1.24”

(3.15 cm) Europe: CustomerService.hsEurope@ idexcorp.com

Asia: CustomerService.hsAsia@ idexcorp.com 0.37” 0.37” UH-436 (0.94Our cm) customerUHP MicroTight Union service team will help (0.94 cm) UHP MicroTight® Union for 360 µm OD tubing for 1/32” OD tubing you contact awith distributor in your area. DIRECT FROM OURand GLOBAL fittings and capsule union included with fittings capsule union included

DISTRIBUTION NETWORK

IDEX Health & Science has established relationships with a global network of Distributors that offer outstanding product support and assistance. 0.80” In order to meet our customer’s (2.03 cm) needs, and the demands of being a global supplier, we have come to rely on our authorized Distributors to provide value-added service and 0.24” support of our products. While we(0.62 arecm) 1959-01 happy to take your order directly, we ® UHP MicroTight Union encourage youfor to1/32” contact local ODyour tubing IDEX Health & Science Distributor.

CONNECTORS

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS For a complete distributor listing1.25” (3.18 cm) please visit www.semrock.com/ international-distributors.aspx

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE UH-632 PRODUCTS IN THIS CATALOG SHALL HAVE NO 0.32” UHP MicroTight Union LIABILITY WHATSOEVER DUE TO ANY MISUSE (0.81 cm) for 1/32” OD tubing OF THEIR PRODUCTS. Of course, the safe use of with fittings included our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular procedures and use. IDEX Health & Science facilities are certified ISO 9001.

ULTRA HIGH PRESSURE MULTIPORT CONNECTORS

www.biotech.se VHP MICROTIGHT UNIONS

OPTICS

Shutter Products The UH-632 is a more traditionally designed connector, incorporating internally

COLUMN HARDWARE

Two of these products — the UH-432 and UH-436 — follow the design of our popular Mini MicroFilters (see page 109) and allow a convenient union between either 1/32” OD tubing or 360 µm OD tubing. Each features a stainless steel union body and a unique stainless steel union capsule, enabling both excellent chemical compatibility as well as conductivity, making these a great choice for electrical interfacing in certain LC-MS applications. Each is also coupled with direct-connect ferrules made from our proprietary PEEK polymer blend (PK), allowing tubing connections up to 15,000 psi (1,034 bar). (Please Note: While these connectors can be used at elevated pressures, they are not recommended for applications above 100 ºC.)

DEGASSERS

ORDER PROCESSING/ SHIPPING

IDEX Health & Science has expanded its line of specialized fittings and connectors for UHPLC applications to include several innovative unions and adapters.

VALVES

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

VHP Unions for Capillary Tubing FLUIDIC CONNECTIONS

Laser Products Options to direct-connect both 1/32” OD

Pressure rated up to 15,000 psi (1,034 bar)

FLUIDICS

Fluidics Products

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

2 76

VHP MicroTight® Unions (Cont.) APPLICATION NOTE

FLUIDICS

Fluidics ProductsTubing

What is a True ZDV Union?

idex-hs.com

True zero dead volume (ZDV) unions are designed so that the two joined pieces of tubing butt perfectly together as shown in the image to the right. These products have no swept volume contained within the union body. The fluid moves directly from one tube into another in this type of connector.

Nut

FLUIDIC CONNECTIONS

Ferrule

Laser Products +1 760 438 2131

When using true ZDV unions, it is important to take care to ensure connecting tubing has burr-free 90 degree ends. Find tubing cutters on page 28 to assist with cleanly cutting polymer and fused silica tubing. Gauge plugs are supplied with True ZDV Unions to assist with assembly. With the gauge plug inserted into one side of the union, a hard stop is created for the tubing to bottom out against as it is connected to the opposite port. The gauge plug is removed and then the second piece of tubing is connected, using the first piece of tubing to bottom out against resulting in the two tubes joined together in the center of the union.

Butt Joint Union

True Zero Dead-Volume Connection

Optical Filters

+1 Find 585Fused 244Silica 7220 tubing on page 16.

VALVES

semrock.com

Find 1/32” OD Stainless Steel tubing on page 19. To achieve 15,000 psi (1,034 bar) with the female threaded fittings used with some of these products, use the P-278 extender tool found on page 50. RETURN OF MATERIALS

COLUMN HARDWARE

DEGASSERS

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

Product purchased through a Distributor must be returned directly to that Distributor. Please contact them for Return Material Authorization procedures.

DIRECT FROM OUR GLOBAL DISTRIBUTION NETWORK

TERMS

IDEX Health & Science has established relationships with a global network of Distributors that offer outstanding product support and assistance. In order to meet our customer’s needs, and the demands of being a global supplier, we have come to rely on our authorized Distributors to provide value-added service and support of our products. While we are happy to take your order directly, we encourage you to contact your local IDEX Health & Science Distributor.

Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by qualified customers. No international credit card payment is possible. No international shipments are Part No. For Description possible. terms and conditions VHP FOR CAPILLARY TUBING of saleUNIONS please visit www.idex-hs.com/ Unionand for 1/32” OD UH-432 VHPTerms legal-notices. prices areTubing, PEEK/SST VHP Union for 360notice. µm OD Tubing, PEEK/SST UH-436to change subject without

VHP MicroTight Unions OPTICS

RELATED PRODUCTS Shutter Products Find replacement VHP fittings on page 59.

Threads

UH-632

VHP True ZDV Union for 1/32” OD Tubing, PEEK/SST

5/16-24 Coned 5/16-24 Coned 6-32 Coned

1959-01

VHP Union for 1/32” OD Tubing, SST

M4x0.7

ORDERING FLUIDICS INFORMATION FLUIDIC CONNECTIONS

IDX2398-1_Catalog.indb 76 IDX2398-1_Catalog-BioTech.indb 2

CONNECTORS

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS For a complete distributor listing please visit www.semrock.com/ international-distributors.aspx

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and Includes Thru-hole other variables. Product and material performance ratings are provided as guides only. Individual field 0.006” (0.150 mm) (2) PK-112, (2) P-416 tests should be performed by customers to determine safe operating parameters given your0.006” particular(0.150 mm) (2) PK-152, (2) P-416BLK procedures and use. IDEX Health & Science facilities (2) PK-126, (1) P-553 Gauge Plug N/A are certified ISO 9001.

N/A (Fittings must be ordered separately) 0.007” (178 µm)

ULTRA HIGH PRESSURE MULTIPORT CONNECTORS

Swept Volume Pressure Rating

Qty.

5 nL 5 nL N/A

15,000 psi (1,034 bar) 15,000 psi (1,034 bar) 15,000 psi (1,034 bar)

ea. ea. ea.

16 nL

30,000 psi (2,070 bar)

ea.

www.biotech.se VHP MICROTIGHT UNIONS

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

MicroTight Adapters

idex-hs.com

FLUIDICS

Fluidics Products

Create a true zero dead volume (ZDV) connection between 1/16” OD tubing and capillary tubing with our MicroTight Adapters.

Convenient adapters for common 1/16” OD to capillary tubing

pressure rated to +1 VHP 760adapters 438 12,000 psi (8282131 bar)

For Very High Pressure applications the UH-630 will connect 1/16” OD to 1/32” OD tubing in an inline true ZDV connection with the ability to withstand 12,000 psi (828 bar)! The materials of construction also allow this product to be used up to 200 ºC, which reduces the pressure rating to 8,000 psi (552 bar). For more information on the fittings used with the VHP adapter, please see page 59.

FLUIDIC CONNECTIONS

Laser Products

Direct connect to 1/32” OD or 360 µm OD tubing options available

NOTE

Optical Filters

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

TERMS

UH-630

VHP MicroTight Adapter for 1/16” and 1/32” OD tubing with fittings included

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 77 2

UH-634

VHP MicroTight Adapter for 1/16” and 360 µm OD tubing with fittings included

HOW TO FIND A LOCAL DISTRIBUTOR FOR FLUIDICS PRODUCTS For a complete distributor listing please visit www.idex-hs.com/UH-753 VHP MicroTight Adapting Tee 360 µm (2 ports) distributors or email: to 10-32 C for 1/16” OD tubing (1 port) US: IHSOrders@idexcorp.com Europe: CustomerService.hsEurope@ idexcorp.com

Product purchased through a Distributor must be returned Asia: UH-631-01 directly to thatUH-906 Distributor. Please VHP MicroTight Adapter 10-32 Coned for 1/16” OD tubing VHP MicroTight Adapting Cross CustomerService.hsAsia@ contact them for Return Material and 6-40 Coned for 1/32” OD tubing fittings not included 10-32 Coned for 1/16” OD tubing and idexcorp.com 5/16-24 Coned for 360 µm OD tubing Authorization procedures. Our customer service team will help you contact a distributor in your area. 0.76” DIRECT FROM OUR GLOBAL

DISTRIBUTION NETWORK

10-32

HOW TO FIND A LOCAL IDEX Health & Science has established DISTRIBUTOR FOR relationships with a global network SEMROCK PRODUCTS of Distributors that offer outstanding 6-32 For a complete distributor listing product support and assistance. please visit www.semrock.com/ In order to meet our customer’s international-distributors.aspx needs, and the demands of being 1958-01 P-770 a global supplier, we have come to VHP MicroTight Adapter MicroTight ZDV Adapter rely on our authorized Distributors 10-32 Coned for 1/16” OD tubing for 1/16” OD to MicroTight Sleeves for use with and M4x0.7 for 1/32” fittings included to provide value-added service andOD tubing The products in this catalog are intendedwith analytical, biotechnology and diagnostic equipment support of our products. While we are and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your order directly, we LIABILITY WHATSOEVER DUE TO ANY MISUSE encourage you to contact your local OF THEIR PRODUCTS. Of course, the safe use of IDEX Health & Science Distributor. our products depends on our customers, since it is

P-881

MicroTight ZDV Adapter for 1/16” to 1/32” OD tubing with fittings included ORDERING INFORMATION FLUIDIC CONNECTIONS FLUIDICS

0.37” (0.94 cm)

CONNECTORS

MICROTIGHT ADAPTERS

(1.93 cm)

0.25” (0.64 cm)

you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular P-882 procedures and use. IDEX Health & Science facilities MicroTight ZDV Adapter are certified ISO 9001. for 1/16” to 360 µm OD tubing

OPTICS

+1 585 244 7220

COLUMN HARDWARE

Shutter Products

with fittings included

www.biotech.se

DEGASSERS

ORDER PROCESSING/ SHIPPING

1.51” (3.84 cm)

VALVES

While many 10-32 coned fittings are interchangeable, coned fittings using different threads are generally not interchangeable. As such, IDEX Health & semrock.com Science recommends that only the style of coned fittings that accompanies these connectors be used for replacements.

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

2 78

MicroTight® Adapters (Cont.) FLUIDICS

Fluidics Products

RELATED PRODUCTS Replacement 6-32 fittings are on page 34.

idex-hs.com

Replacement F-120 style nuts are on page 32 (when ordering, replace the “x” with an “R” or “B” to order either red or blue fittings). Use this list to find micro flow products outside this chapter.

FLUIDIC CONNECTIONS

Page

Laser Products +1 760 438 2131

Optical Filters

360 µm, 510 µm (0.020”), and 1/32” OD PEEK Tubing

360 µm OD Fused Silica Tubing

1/16” and 1/32” OD PEEKsil™ Tubing

1/32” OD FEP Tubing

360 µm OD High Purity PFA Tubing

510 µm (0.020”) and 1/32” OD Stainless Steel Tubing

Polymer Capillary and Fused Silica Tubing Cutters

MX Series II™ Injection and Switching Valves

119

Manual Injection Valves

121

Micro Injection Port Adapters

132

Micro-Splitter Valves

140

Micro-Metering Valves

141

Microbore Guard Column

158

Ultra-Low Volume Back-Pressure Regulators

144

Nonmetallic 10-32 Micro-Volume Inline Check Valve

137

Shutter Products

+1 585 244 7220

VALVES

semrock.com

DEGASSERS

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

OPTICS

COLUMN HARDWARE

MicroTight Adapters

DIRECT FROM OUR GLOBAL DISTRIBUTION NETWORK

Part No. Description Threads Includes HOW TO FIND A Color LOCAL Swept Volume IDEX Health & Science has established All shipments areADAPTERS FCA unless DISTRIBUTOR FOR MICROTIGHT relationships with a global network SEMROCK PRODUCTS otherwise noted. orders not True ZDV, for of PEEKFor Micro Adapter, 1/16” Distributors 10-32that C tooffer 6-32outstanding C (1) F-120, (1) F-125, (1) P-554 Natural N/A P-770 OD Tubing to MicroTight Tubing Sleeve placed via our website, shipping For a complete distributor listing product support and assistance. PEEK Micro Adapter, True ZDV, charges please visit www.semrock.com/ to 6-32 C (1) F-120R, (1) F-126S, (1) P-554 Red N/A P-881 will be prepaid and added to In order to10-32 meetCour customer’s for 1/16” to 1/32” OD Tubing the invoice. Or, if requested, we will international-distributors.aspx needs, and the demands of being PEEK Micro Adapter, True ZDV, 10-32 C to 6-32 C (1) F-120B, (1) F-124S, (1) P-554 Blue N/A P-882 your carrier account number. charge for 1/16” to 360 µm OD Tubing a global supplier, we have come to Stainless Steel VHP Micro Adapter,rely on our authorized Distributors 10-32 C to 6-32 C (1) PK-120BLK, (1) PK-126, (1) P-554 SST/Black N/A UH-630 The products in this catalog are intended for use with TERMS for 1/16” to 1/32” OD Tubing to provide value-added service and analytical, biotechnology and diagnostic equipment Steel VHP Micro Adapter, support of our products. we 10-32 C to 6-32 While C (1) are PK-120BLK,and (1) accessories. PK-124, (1)THE P-554 SST/Black Credit cards Stainless are accepted for orders UH-634 MANUFACTURERS OF THEN/A for 1/16” to 360 µm OD Tubing PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your order directly, we placed withinStainless the United States. Steel VHP Micro Adapting Tee, C to 5/16-24 C local (2) P-416BLK, (2) PK-152 UH-753 orders may also be used by LIABILITY WHATSOEVER DUESST/Black TO ANY MISUSE 152 nL encourage10-32 you to contact your Purchase for 1/16” to 360 µm OD Tubing OF THEIR PRODUCTS. Of course, the safe use of qualified customers. international Stainless No Steel VHP Micro Adapter,IDEX Health & Science Distributor. our products depends on our customers, since it is 10-32 C to M4x0.7 C N/A SST 16 nL 1958-01 for 1/16”istopossible. 1/32” OD Tubing credit card payment you who select and control the protective gear and Stainless Steel VHP Micro Adapter, safety procedures used, as well as the pressures, No international shipments are 10-32 C to 6-40 C N/A SST 13 nL UH-631-01 for 1/16” to 1/32” OD Tubing temperatures, solvents, samples, ventilation, and possible. For terms and conditions variables. Product (2) PK-120BLK,other (2) P-416BLK, (2) and material performance Stainless Steel VHP Micro Adapting Cross, SST/Black 0.11 µL 10-32 C to 5/16-24 C UH-906 of sale pleaseforvisit www.idex-hs.com/ PK-152 1/16” to 360 µm OD Tubing ratings are provided as guides only. Individual field should be performed by customers to determine legal-notices. TermsGAUGE and prices are (TO ACHIEVE TRUE ZDV CONNECTIONS WITHtests REPLACEMENT PLUGS THE ABOVE ADAPTERS) safe operating parameters given your particular subject notice. Delrin®without Gauge Plug 10-32 C White N/A P-554 to change procedures and use. IDEX Health & Science facilities are certified ISO 9001.

C = Coned * Pressure rating depends upon the fitting used. ORDERING FLUIDIC CONNECTIONS FLUIDICS INFORMATION

IDX2398-1_Catalog.indb 78 IDX2398-1_Catalog-BioTech.indb 2

CONNECTORS

MICROTIGHT ADAPTERS

Pressure Rating

Qty.

4,000 psi (276 bar)

ea.

5,000 psi (345 bar)

ea.

5,000 psi (345 bar)

ea.

12,000 psi (827 bar)

ea.

12,000 psi (827 bar)

ea.

15,000 psi (1,035 bar)*

ea.

30,000 psi (2,070 bar)*

ea.

30,000 psi (2,070 bar)*

ea.

15,000 psi (1,035 bar)*

ea.

N/A

ea.

www.biotech.se

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

Fluidics Products

FLUIDICS

Accessories

idex-hs.com

Insulating Mounting Bracket FLUIDIC CONNECTIONS

Use our Insulating Mounting Bracket to easily integrate the Conductive MicroTight Union (shown on page 71) or our Conductive Mini MicroFilters (on page 109) into your system or lab.

Laser Products

The product snaps into place. Voltage from your lead wire is conducted through the attaching stainless steel nut and screw (included), then onto the mounted product via the stainless steel clip.

+1 760 438 2131

The bracket’s base includes two holes (#2 screw clearance) for easy mounting onto any lab surface. Dimensions are 1.25” L x 0.45” W x 0.63” H. Insulating Mounting Bracket, shown with lead wire and Conductive MicroTight Union, not included.

Optical Filters

Shutter Products

semrock.com

+1 585 244 7220 VALVES

RETURN OF MATERIALS

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

ORDER PROCESSING/ SHIPPING

Product purchased through a Distributor must be returned directly to that Distributor. Please contact them for Return Material Authorization procedures.

DIRECT FROM OUR GLOBAL DISTRIBUTION NETWORK

TERMS

M-447

Insulating Mounting Bracket

ORDERING INFORMATION FLUIDIC CONNECTIONS FLUIDICS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 79 2

Threads

Includes

N/A

CONNECTORS

ACCESSORIES

US: IHSOrders@idexcorp.com Europe: CustomerService.hsEurope@ idexcorp.com Asia: CustomerService.hsAsia@ idexcorp.com Our customer service team will help you contact a distributor in your area.

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS For a complete distributor listing please visit www.semrock.com/ international-distributors.aspx

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular Thru-hole Swept Volume procedures and use. IDEX Health & Science facilities are certified ISO 9001.

N/A

Pressure Rating

Qty.

N/A

ea.

www.biotech.se

OPTICS

For a complete distributor listing please visit www.idex-hs.com/ distributors or email:

COLUMN HARDWARE

HOW TO FIND A LOCAL DISTRIBUTOR FOR FLUIDICS PRODUCTS

DEGASSERS

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

2 80

NanoPort Assemblies

FLUIDICS

Fluidics Products idex-hs.com

NanoPort Assemblies provide consistent fluid connections for chip-based analyses. NanoPort connections will bond to a variety of substrate materials with the use of Loctite.™

FLUIDIC CONNECTIONS

For lab-on-a-chip applications Options to connect 1/16” OD Tubing directly, or 360µm and 1/32” OD Tubing with tubing sleeves

Laser Products

All NanoPort components are made of inert, biocompatible PEEK polymer (nuts and ports), Perlast® perfluoroelastomer (gaskets), and ETFE (ferrules). Their unique design also prevents adhesive contamination of the fluid path. And NanoPort connections add no additional volume to the fluid path, virtually eliminating dead volume traditionally associated with chip-based fluid connections.

materials: +1 Wetted 760and 438 2131 PEEK perfluoroelastomer

0.25” (6.4 mm)

Optical Filters

Tubing

Shutter10-32 Coned NanoPort Products

0.38” (9.7 mm)

semrock.com

(not included)

10-32 FB 2-Piece Fitting

+1 585(8.40.33” 244 7220 mm)

VALVES

Gasket

NOTE RETURN OFOur MATERIALS TO FIND A LOCAL NanoPort AssemblyHOW will readily connect 1/16” OD tubing with the included DISTRIBUTOR FOR Returns must be authorized in fittings. To connect 1/32” OD or 360µm OD, tubing sleeves for each size are FLUIDICS PRODUCTS advance. Please contact us within

OPTICS

COLUMN HARDWARE

DEGASSERS

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

included in each assembly. For a complete distributor listing 30 days of purchase for your please visit www.idex-hs.com/ Returns Material Authorization Adhesive is not included in the N-333 NanoPort Assembly. Please contact IDEX Health distributors or email: (RMA) Number. A restocking fee & Science for bonding information or use common bonding adhesives such as Loctite. may apply. To request a Return US: Materials Authorization for IDEX IHSOrders@idexcorp.com Health & Science products visit Europe: www.idex-hs.com/return. CustomerService.hsEurope@ Product purchased through a idexcorp.com Distributor must be returned Asia: directly to that Distributor. Please CustomerService.hsAsia@ contact them for Return Material idexcorp.com Authorization procedures. Our customer service team will help you contact a distributor in your area. DIRECT FROM OUR GLOBAL

DISTRIBUTION NETWORK

TERMS Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by Part No. customers. No Description qualified international NANOPORT ASSEMBLIES credit card payment is possible. 10-32 Coned NanoPort Assembly No international shipments are F-333N N-333 For terms and conditions possible. REPLACEMENT PARTS ofNANOPORT sale please visit www.idex-hs.com/ Fittings F-333Nx legal-notices. Terms andHeadless prices are Ferrules F-142Nx subject to change without notice. Gaskets N-123-02

F-142N 10-32 C 10-32 C

Gasket, For all assemblies except 6-32 Coned Assemblies

ORDERING FLUIDICS INFORMATION FLUIDIC CONNECTIONS

IDX2398-1_Catalog.indb 80 IDX2398-1_Catalog-BioTech.indb 2

CONNECTORS

NANOPORT ASSEMBLIES

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS For a complete distributor listing please visit www.semrock.com/ international-distributors.aspx

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR Of course, the safe use of For Chip PRODUCTS. Hole our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, samples, ventilation, and Up to 0.063”solvents, (1.6 mm) other variables. Product and material performance ratings are provided as guides only. Individual field Up toshould 0.063” (1.6 mm) by customers to determine tests be performed safeto operating Up 0.063”parameters (1.6 mm) given your particular procedures and use. IDEX Health & Science facilities are certified ISO 9001.

N/A

Tubing OD

Qty.

1/16”

ea.

1/16” 1/16”

10-pk 10-pk

N/A

ea.

www.biotech.se

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

idex-hs.com

FLUIDICS

Low Pressure Manifolds

Fluidics Products

Laser Products

FLUIDIC CONNECTIONS

Choose a 5, 7, or 9 Port Manifold to combine several streams into one, or split one fluid stream into several. Each PEEK manifold comes complete with 1/4-28 Super Flangeless™ Fittings for either 1/16” or 1/8” OD tubing, with pressure ratings of 2,000 psi (138 bar) and 500 psi (34 bar), respectively. A few useful applications include:

+1 760 438 2131

Multiport mixing chamber Gas sparging splitting union Sample injection onto multi-well plates or a multiple direction flow path union

Optical Filters

Shutter Products

0.13” diameter (0.33 cm)

1/4-28 threads

semrock.com

+1 585 244 7220

0.45” (1.14 cm)

VALVES

0.73” (1.85 cm) 1.23” (3.12 cm)

1.23” (3.12 cm)

Side View

RETURN OF MATERIALS

ORDER PROCESSING/ SHIPPING

may apply. To request a Return Materials Authorization for IDEX Health & Science products visit www.idex-hs.com/return.

TERMS

Product purchased through a Distributor must be returned directly to that Distributor. Please contact them for Return Material Authorization procedures.

PEEK 9-Port Manifold for 1/16” OD Tubing P-191 FB = Flat Bottom ORDERING INFORMATION FLUIDICS FLUIDIC CONNECTIONS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 81 2

1/4-28 FB 1/4-28 FB 1/4-28 FB 1/4-28 FB 1/4-28 FB

CONNECTORS

(7) P-255, (7) (5) P-255, (5) (5) P-331, (5) (9) P-331, (9) (9) P-255, (9)

Top View

US: IHSOrders@idexcorp.com Europe: CustomerService.hsEurope@ idexcorp.com Asia: CustomerService.hsAsia@ idexcorp.com Our customer service team will help you contact a distributor in your area.

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS For a complete distributor listing please visit www.semrock.com/ international-distributors.aspx

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of Thru-hole Swept Volume our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, samples, ventilation, and P-250temperatures, 0.040”solvents, (1.00 mm) 42.0 µL other variables. Product and material performance P-250ratings are 0.040” (1.00 mm) 22.3field µL provided as guides only. Individual P-359tests should 0.062” (1.60 mm) µL be performed by customers to53.8 determine given your particular P-359safe operating 0.062”parameters (1.60 mm) 160 µL procedures and use. IDEX Health & Science facilities P-250 0.040” (1.00 mm) 139 µL are certified ISO 9001.

LOW PRESSURE MULTIPORT CONNECTORS

MANIFOLDS

Pressure Rating

Qty.

1,000 psi (69 bar) 1,000 psi (69 bar) 500 psi (34 bar) 500 psi (34 bar) 1,000 psi (69 bar)

ea. ea. ea. ea. ea.

www.biotech.se

OPTICS

Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by Part No. customers. Description qualified No international MANIFOLDS credit card payment is possible. Standard No international shipments are 7-Port for 1/16” OD Tubing P-150 possible. ForPEEK terms and Manifold conditions PEEK Manifold for 1/16” OD Tubing P-154 of sale please visit5-Port www.idex-hs.com/ PEEK 5-Port for 1/8” OD Tubing P-155 legal-notices. Terms andManifold prices are PEEK 9-Port Manifold P-190 to change subject without notice.for 1/8” OD Tubing

1.00” (2.54 cm)

COLUMN HARDWARE

HOW TO FIND A LOCAL

DISTRIBUTOR FOR P-150 Returns must be authorized in FLUIDICS PRODUCTS PEEK 7-Portus Manifold advance. Please contact within comes with Super Flangeless Fittings For a complete distributor listing 30 days of purchase for your please visit www.idex-hs.com/ Returns Material Authorization distributors or email: (RMA) Number. A restocking fee

DEGASSERS

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

2 82

Low Pressure Bulkhead Unions

FLUIDICS

Fluidics Products idex-hs.com

Thread PEEK Bulkhead Unions directly through your equipment housing to connect internal tubing to the outside. Each union has unique 3/8-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place. Requires a 3/8” hole to mount. The recommended torque limit for these unions is 15 in.– lbs (1.7 N·m).

FLUIDIC CONNECTIONS

Designed for plumbing tubing through equipment housing

Laser Products

For use with standard 10-32 coned or 1/4-28 flat-bottom threaded fittings

+1 760 438 2131

P-430 Optical Filters

P-441

VALVES

0.67” (1.70 cm) 0.38” (0.97cm)

0.78” (1.98 cm)

DEGASSERS

Shutter Products

includes stainless steel nut/lock washer

P-440

10-32 internal threads

0.59” (1.50 cm)

P-441

1/4-28 internal threads

+1 585 244 7220

Elbow Connectors

For your information, our U.S. P-430 PEEK Elbow comes with Flangeless Fittings Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

COLUMN HARDWARE

0.84” (2.13 cm)

0.59” (1.50 cm)

Bulkhead Union

semrock.com

1/4-28 threads

OPTICS

0.84” (2.13 cm)

ORDER PROCESSING/ SHIPPING Orders placed on our website process 5/16-24 and ship as specified during the checkout process.0.44” Orders that are (1.12 cm) placed via fax/email will be subject to P-134 a $100 minimum PEEK ZDV Union order quantity and typically process within one business day and ship within two business days. Customers who have established contract pricing terms must place catalog orders directly with their Customer Service representative. All shipments are FCA unless otherwise noted. For orders not placed via our website, shipping charges will be prepaid and added to the invoice. Or, if requested, we will charge your carrier account number.

TERMS

Use these Elbow Connectors to easily navigate tight corners. One Elbow is designed for use with 1/16” OD tubing and has a 0.020” (0.50 mm) thru-hole. Use 1/8” OD tubing with the other Elbow, which has a 0.062” (1.6 mm) thru-hole. Both come complete with 1/4-28 nuts and ETFE ferrules, andFIND are pressure RETURN OFPEEK MATERIALS HOW TO A LOCALrated to 1,000 psi (69 bar). DISTRIBUTOR FOR Returns must be authorized in FLUIDICS PRODUCTS advance. Please contact us within For a complete distributor listing 30 days of purchase for your please visit www.idex-hs.com/ Returns Material Authorization distributors or email: (RMA) Number. A restocking fee may apply. To request a Return US: 5/16-24 flat-bottom threads Materials Authorization for IDEX IHSOrders@idexcorp.com Health & Science products Use any ofvisit the 5/16-24 fittings Europe:on page 55 and the appropriate ferrule to create a true www.idex-hs.com/return. zero dead volume (ZDV)CustomerService.hsEurope@ connection with the P-134 Union. Product purchased through a idexcorp.com Distributor must be returned Asia: directly to that Distributor. Please CustomerService.hsAsia@ contact them for Return Material idexcorp.com Authorization procedures. Our customer service team will help you contact a distributor in your area. DIRECT FROM OUR GLOBAL

Large Bore Union

RELATED PRODUCTS

DISTRIBUTION NETWORK Stainless Steel Bulkhead Unions are also available. Please contact us for more information. HOW TO FIND A LOCAL IDEX Health & Science has established DISTRIBUTOR FOR relationships with a global network To use Elbows in higherSEMROCK pressure applications, PRODUCTSsimply replace the provided fittings with of Distributors that offer outstanding ™ Super Flangeless NutsFor and Ferrules, found on page 39. a complete distributor listing product support and assistance. In order to meet our customer’s needs, and the demands of being a global supplier, we have come to rely on our authorized Distributors to provide value-added service and support of our products. While we are happy to take your order directly, we Threads encourage you to contact yourColor local IDEX Health & Science Distributor.

Credit cards are accepted for orders placed within the United States. Part No. ordersDescription Purchase may also be used by BULKHEAD UNIONS qualified customers. No international PEEKisBulkhead P-440card payment credit possible.Union Bulkhead P-441 No internationalPEEK shipments areUnion PEEK Bulkhead Union P-441N For terms possible. and conditions ELBOW CONNECTORS of sale please visit www.idex-hs.com/ PEEKand Elbow for 1/16” P-430 legal-notices. Terms prices are OD Tubing PEEK Elbownotice. for 1/8” OD Tubing P-432 to change subject without LARGE BORE UNION P-134

PEEK True ZDV Union

ORDERING FLUIDIC CONNECTIONS FLUIDICS INFORMATION

IDX2398-1_Catalog.indb 82 IDX2398-1_Catalog-BioTech.indb 2

10-32 Coned 1/4-28 Flat-Bottom 1/4-28 Flat-Bottom

Natural Red Natural

1/4-28 Flat-Bottom 1/4-28 Flat-Bottom

Natural Natural

5/16-24 Flat-Bottom

Natural

CONNECTORS

please visit www.semrock.com/ international-distributors.aspx

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TOThru-hole ANY MISUSE Includes OF THEIR PRODUCTS. Of course, the safe use of our products depends on our customers, since it is (1) 0.020”gear (0.50 mm) youSST who Nut/Washer select and control the protective and (1) SST Nut/Washer (1.00 mm) safety procedures used, as well as0.040” the pressures, temperatures, solvents, samples, ventilation, and mm) (1) SST Nut/Washer 0.040” (1.00 other variables. Product and material performance ratings are provided as guides only. Individual field (2) XP-235 0.020”to(0.50 mm) tests should be performed by customers determine safeXP-335 operating parameters given your particular (2) 0.062” (1.60 mm) procedures and use. IDEX Health & Science facilities are certified ISO 9001.

N/A

LOW PRESSURE MULTIPORT CONNECTORS

N/A

BULKHEAD UNIONS

Swept Volume

Qty.

1.9 µL 2.9 µL 2.9 µL

ea. ea. ea.

1.4 µL 13.6 µL

ea. ea.

N/A

ea.

www.biotech.se

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

idex-hs.com

FLUIDICS

Low Pressure Y Connectors

Fluidics Products

Laser Products

FLUIDIC CONNECTIONS

PEEK Y Connectors are designed to split a stream or join two streams together, just like a tee. However, the configuration of a tee can lead to turbulent flow and solvent outgassing, which increases baseline noise and reduces sensitivity. The geometry of a Y connector creates less turbulence and thus can improve analytical results. All of these Y Connectors use 1/4-28 Flangeless fittings, except P-515 which uses 5/16-24 fittings (to accommodate larger tubing).

+1 760 438 2131

1/4-28 threads 0.13” diameter (0.33 cm)

Optical Filters

Shutter Products

semrock.com

+1 585 244 7220

0.39” 0.50” 1.00” (0.99 cm) (1.27 cm) (2.54 cm)

VALVES

P-512

PEEK Y comes with Flangeless Fittings

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

TERMS

PEEK Y for 3/16" OD Tubing P-515 FB = Flat-Bottom ORDERING INFORMATION FLUIDIC CONNECTIONS FLUIDICS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 83 2

Includes

1/4-28 FB 1/4-28 FB 1/4-28 FB 5/16-24 FB

(3) XP-235 (3) XP-335 (3) XP-335 (3) XP-132

CONNECTORS

For a complete distributor listing please visit www.idex-hs.com/ distributors or email: US: IHSOrders@idexcorp.com Europe: CustomerService.hsEurope@ idexcorp.com Asia: CustomerService.hsAsia@ idexcorp.com Our customer service team will help you contact a distributor in your area.

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS For a complete distributor listing please visit www.semrock.com/ international-distributors.aspx

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, Thru-hole Swept Volume temperatures, solvents, samples, ventilation, and other variables. Product and material performance 0.020” (0.50 1.7 µL ratings are provided as mm) guides only. Individual field 0.040” (1.00 mm) µL tests should be performed by customers to6.0 determine safe operating parameters given your particular 0.060” (1.50 mm) 13.6 µL procedures and use. IDEX Health & Science facilities 0.125” (3.20 mm) 47.7 µL are certified ISO 9001.

LOW PRESSURE MULTIPORT CONNECTORS

Y CONNECTORS

Pressure Rating

Qty.

1,000 psi (69 bar) 500 psi (34 bar) 500 psi (34 bar) 500 psi (34 bar)

ea. ea. ea. ea.

www.biotech.se

OPTICS

Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by qualified customers. No international credit card payment is possible. Partinternational No. Description No shipments are Y CONNECTORS possible. For terms and conditions PEEK for 1/16" OD Tubing P-512 of sale please visitYwww.idex-hs.com/ PEEK Y for 1/8" OD Tubing P-513 legal-notices. Terms and prices are PEEK Ywithout for 1/8"notice. OD Tubing P-514 to change subject

Product purchased through a Distributor must be returned directly to that Distributor. Please contact them for Return Material Authorization procedures.

HOW TO FIND A LOCAL DISTRIBUTOR FOR FLUIDICS PRODUCTS

COLUMN HARDWARE

DEGASSERS

ORDER PROCESSING/ SHIPPING

RETURN OF MATERIALS

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

2 84

FLUIDICS

Fluidics Products

Low Pressure Unions

idex-hs.com

Laser Products

Available with 1/4-28, M6, or 10-32 flat-bottom threads

+1 760 438 2131

Our Low Pressure Unions are available in a variety of polymers, providing several lowcost and chemically-resistant options. The union assemblies below include fittings as shown in the table. The unions in the right column do not include fittings, allowing for customizing the fitting selection. In some cases, a union can be configured to connect two different tubing sizes—for example, if 1/4-28 Flangeless fittings for 1/16” and 1/8” OD tubing were selected from page 45 they can be used with the P-603 union to connect the two different tubing sizes.

Low Pressure PEEK Union Assemblies

Optical Filters

Shutter Products

semrock.com

+1 585 244 7220

Low Pressure ETFE Union Assemblies 0.78” (1.98 cm)

VALVES

FLUIDIC CONNECTIONS

Manufactured from PEEK, ETFE, Delrin®, polypropylene, or PCTFE

0.44” (1.12 cm)

P-702 & P-703

COLUMN HARDWARE

DEGASSERS

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

OPTICS

0.81” (2.06 cm)

TERMS Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by qualified customers. No international credit card payment is possible. No international shipments are possible. For terms and conditions of sale please visit www.idex-hs.com/ legal-notices. Terms and prices are subject to change without notice.

ORDERING FLUIDIC CONNECTIONS FLUIDICS INFORMATION

IDX2398-1_Catalog.indb 84 IDX2398-1_Catalog-BioTech.indb 2

0.37” (0.94 cm)

P-630 & P-631

Unions with Flangeless Fittings Unions with Flangeless RETURN OFPEEK MATERIALS HOW TO FIND A LOCALETFE (1/4-28 internal threads) Fittings (1/4-28 internal threads) DISTRIBUTOR FOR Returns must be authorized in FLUIDICS PRODUCTS advance. Please contact us within

30 days of purchase for your Returns Material Authorization (RMA) Number. A restocking fee may apply. To request a Return Materials Authorization for IDEX Health & Science products visit www.idex-hs.com/return. Product purchased through a Distributor must be returned directly to that Distributor. Please contact them for Return Material Authorization procedures.

For a complete distributor listing please visit www.idex-hs.com/ distributors or email:

0.81” (2.06 cm)

US: IHSOrders@idexcorp.com

P-710 ETFE Union with Flangeless Europe: Fittings (1/4-28 internal threads) CustomerService.hsEurope@ idexcorp.com

0.37” (0.94 cm)

Asia:

Low Pressure CustomerService.hsAsia@ Low Pressure idexcorp.com Standard UnionsOur customer service team willMetric Unions help

DIRECT FROM OUR GLOBAL DISTRIBUTION NETWORK

you contact a distributor in your area. 0.81”

(2.06FIND cm) HOW TO A LOCAL IDEX Health & Science has established DISTRIBUTOR FOR relationships with a global network SEMROCK PRODUCTS of Distributors that offer outstanding For a complete distributor listing product support and assistance. please visit www.semrock.com/ In order to meet our customer’s international-distributors.aspx 0.37” needs, and the demands of being (0.94 cm) a global supplier, we have come to P-603,Distributors P-620 & P-623 P-602 & P-622 rely on our authorized The products in this catalog are intendedMetric for use with Standard Unions Unions (M6 internal threads) to provide value-added service(1/4-28 and internal threads) analytical, biotechnology and diagnostic equipment support of our products. While we are and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your order directly, we LIABILITY WHATSOEVER DUE TO ANY MISUSE encourage you to contact your local OF THEIR PRODUCTS. Of course, the safe use of IDEX Health & Science Distributor. our products depends on our customers, since it is

0.82” (2.08 cm)

0.37” (0.94 cm)

you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular procedures and use. IDEX Health & Science facilities are certified ISO 9001.

CONNECTORS

LOW PRESSURE MULTIPORT CONNECTORS

UNION ASSEMBLIES

www.biotech.se

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

FLUIDICS

Fluidics Products idex-hs.com

Low Pressure Male Union

0.76” (1.93 cm)

1.24” (3.15 cm)

+1 760 438 2131

FLUIDIC CONNECTIONS

Laser Products

VacuTight™ Union

0.25” (0.64 cm)

P-645

PCTFE Union (1/4-28 external threads)

Optical Filters semrock.com

0.38” (0.97 cm)

P-845-01

PEEK Union (10-32 internal threads)

Shutter Products RELATED PRODUCTS

+1 585 244 7220

Use any of the 10-32 flat-bottom fittings on 39 and 42 to make an inline connection with our VacuTight Union. This product is designed for use with 1/16” OD tubing. For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

Low Pressure Unions

Product purchased through a Distributor must be returned directly to that Distributor. Please contact them for Return Material Authorization procedures.

DIRECT FROM OUR GLOBAL DISTRIBUTION NETWORK

Part No. Description Threads IDEX HealthColor & Science has established All shipments areASSEMBLIES FCA unless PEEK UNION relationships with a global network otherwise noted. orders not OD Tubing of Distributors PEEKFor Union for 1/16” Natural 1/4-28 FB P-702 that offer outstanding placed website, PEEK Union shipping for 1/8” OD Tubing product support Natural 1/4-28 FB P-703 via our and assistance. charges will be prepaid and added to ETFE UNION ASSEMBLIES In order to meet our customer’s the invoice. Or, if requested, we will ETFE True ZDV Union for 1/16” ODneeds, Tubingand the Natural 1/4-28 FB P-630 demands of being charge account number. ETFE True ZDV Union for 1/8” OD Tubing Natural 1/4-28 P-631 your carrier a global supplier, we have come to FB P-710

ETFE Union for 1/16” OD Tubing rely on our authorized Natural Distributors 1/4-28 FB

TERMS STANDARD UNIONS

TO FINDThru-hole A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS (2) XP-235 0.020” (0.50 mm)

Swept Volume

Pressure Rating

Qty.

For a complete distributor listing (2) XP-335 0.050” (1.25 mm)

0.41 µL 2.57 µL

1,000 psi (69 bar) 1,000 psi (69 bar)

ea. ea.

N/A N/A 0.93 µL

1,000 psi (69 bar) 1,000 psi (69 bar) 1,000 psi (69 bar)

ea. ea. ea.

N/A* N/A* N/A*

ea. ea. ea.

N/A* N/A*

ea. ea.

500 psi (34 bar)

ea.

N/A*

ea.

please visit www.semrock.com/ international-distributors.aspx (2) P-200N/P-245 N/A (2) P-300N/P-345 N/A (2) XP-245 0.030” (0.75 mm)

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment N/A N/A and accessories. THE MANUFACTURERS OF THE N/A PRODUCTS IN THIS CATALOG N/A N/A SHALL HAVE NO N/A LIABILITY WHATSOEVER DUE TO ANY MISUSE N/A N/A N/A OF THEIR PRODUCTS. Of course, the safe use of our products depends on our customers, since it is you who select and control the protective gear and 0.41 µL N/A 0.020” (0.50 mm) safety procedures used, as0.020” well as the pressures, N/A (0.50 mm) 0.41 µL temperatures, solvents, samples, ventilation, and other variables. Product and material performance N/A 0.062” mm)field 61.3 µL ratings are provided as guides only.(1.60 Individual tests should be performed by customers to determine safe operating parameters given your particular N/A mm) procedures and use. IDEX0.020” Health &(0.50 Science facilities 0.20 µL * Pressure Rating depends on Fittings selected. See pressure rating for fittings on appropriate page. are certified ISO 9001.

to provide value-added service and products. While we are Credit are accepted orders Union support of our True ZDVfor Standard Natural 1/4-28 FB P-603 cards Delrin happy to take your order directly, weFB placed the United States. True ZDV Standard Union Natural 1/4-28 P-620 withinPolypropylene encourage you to contact your localFB Purchase orders used by ETFEmay Truealso ZDVbe Standard Union Natural 1/4-28 P-623 IDEX Health & Science Distributor. qualified METRICcustomers. UNIONS No international credit is possible. Delrin Metric Union Black M6 FB P-602 card payment No international are ETFEshipments Metric Union Blue M6 FB P-622 possible. For terms and conditions MALE UNION of sale please visit www.idex-hs.com/ PCTFE Male Union Natural 1/4-28 FB P-645 legal-notices. and prices are VACUTIGHTTerms UNION subject to change without PEEK Union for notice. 1/16” OD Tubing Red 10-32 FB P-845-01 FB = Flat-Bottom

ORDERING INFORMATION FLUIDIC CONNECTIONS FLUIDICS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 85 2

CONNECTORS

LOW PRESSURE MULTIPORT CONNECTORS

STANDARD UNIONS

www.biotech.se

OPTICS

Includes HOW

COLUMN HARDWARE

DEGASSERS

ORDER PROCESSING/ SHIPPING

RETURN OF MATERIALS

VALVES

To use connectors in higher pressure applications, simply replace the provided fittings with Super Flangeless™ Nuts and Ferrules, found on page 39.

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:32 PMPM

2 86

Low Pressure Tees & Crosses

FLUIDICS

Fluidics Products idex-hs.com

Our Low Pressure Tees and Crosses are available in two inert polymers and can handle pressures to 500 psi (34 bar) or 1,000 psi (69 bar), depending upon the configuration of the products. Each is designed with handy mounting holes. All ETFE Tees and Crosses ship complete with 1/4-28 PFA Flangeless nuts and ETFE ferrules, while their PEEK polymer counterparts ship with 1/4-28 PEEK nuts and ETFE ferrules. Replacement fittings are located on page 47.

FLUIDIC CONNECTIONS

0.49” (1.24 cm)

Laser Products +1 760 438 2131

Mounting Holes 0.13” diameter (0.33 cm)

1.08” (2.74 cm)

P-632

Optical Filters

P-632 & P-633

ETFE Tees come with Flangeless Fittings

P-154

Shutter Products

0.37” (0.94 cm)

1/4-28 threads

VALVES

semrock.com 0.38”

1.08” (2.74 cm)

0.13” diameter (0.33 cm)

COLUMN HARDWARE

DEGASSERS

For your information, our U.S. Federal Taxpayer Identification 0.69” (1.75 cm) number is 01-0736657; European P-722 PEEK CrossIdentification number Taxpayer comes with Flangeless Fittings is DE 146581180.

OPTICS

+1 585 244 P-723 7220

(0.97 cm)

P-713

RETURN OF MATERIALS

P-190

HOW TO FIND A LOCAL

DISTRIBUTOR FOR Returns must be authorized in FLUIDICS PRODUCTS advance. Please contact us within For a complete distributor listing 30 days of purchase for your please visit www.idex-hs.com/ Returns Material Authorization distributors or email: (RMA) Number. A restocking fee ORDER PROCESSING/ may apply. To request Return US: any of our 1/4–28 flat-bottom plugs found on page 55. Seal aoff unused ports with SHIPPING Materials Authorization for IDEX IHSOrders@idexcorp.com Orders placed on our website process Health & Science To products visitPEEK polymer versions of our Tees and Crosses in higher pressure use the Europe: and ship as specified during the www.idex-hs.com/return. applications, simply replace the provided fittings with Super Flangeless™ Nuts CustomerService.hsEurope@ checkout process. Orders that are To order just the body of one of ourProduct tees purchased through a and Ferrules, found on idexcorp.com page 39. placed via fax/email will be subject to Distributor must be returned and crosses without fittings, simply add a $100 minimum order quantity and Asia: directly to that Distributor. Please Tees, Crosses, and a 7-Port Manifold (all with 10-32 threaded ports) High Pressure a ‘-01’ to the part number — e.g., P-632-01. typically process within one business CustomerService.hsAsia@ contact them for Return are onMaterial page 74. day and ship within two business days. idexcorp.com Authorization procedures. Customers who have established Our customer service team will help contract pricing terms must place you contact a distributor in your area. DIRECT FROM OUR GLOBAL catalog orders directly with their DISTRIBUTION NETWORK Customer Service representative. HOW TO FIND A LOCAL IDEX Health & Science has established All shipments are FCA unless DISTRIBUTOR FOR relationships with a global network SEMROCK PRODUCTS otherwise noted. For orders not of Distributors that offer outstanding placed via our website, shipping For a complete distributor listing product support and assistance. charges will be prepaid and added to please visit www.semrock.com/ In order to meet our customer’s the invoice. Or, if requested, we will international-distributors.aspx needs, and the demands of being charge your carrier account number. a global supplier, we have come to rely on our authorized Distributors The products in this catalog are intended for use with TERMS to provide value-added service and analytical, biotechnology and diagnostic equipment support of our products. While we are Credit cards are accepted for orders and accessories. THE MANUFACTURERS OF THE Part No. Description Threads Includes Swept Pressure Rating PRODUCTS INThru-hole THIS CATALOG SHALL HAVE NO Volume happy to take your order directly, we placed within the United States. LIABILITY WHATSOEVER DUE TO ANY MISUSE LOW PRESSURE TEES AND CROSSES encourage you to contact your local Purchase orders may also be used by OF THEIR PRODUCTS. Of course, the safe use of ETFE for 1/16” OD Tubing Flat-Bottom 0.020” (0.50 mm) 2.9 µL 1,000 psi (69 bar) P-632 customers. IDEX Health1/4-28 & Science Distributor.(3) P-245, (3) P-200N qualified No Tee international our products depends on our customers, since it is ETFE Tee for 1/8” OD Tubing 1/4-28 Flat-Bottom (3) P-345, (3) P-300N (1.25 17.5 µL 500 psi (34 bar) P-633card payment credit is possible. you who select 0.050” and control themm) protective gear and safety procedures used, (0.50 as wellmm) as the pressures, ETFE Cross for 1/16” OD Tubing 1/4-28 Flat-Bottom (4) P-245, (4) P-200N 0.020” 3.8 µL 1,000 psi (69 bar) P-634 No international shipments are temperatures, solvents, samples, ventilation, and Cross for 1/8” OD Tubing 1/4-28 Flat-Bottom (4) P-345, (4) P-300N 0.050” (1.25 mm) 22.8 µL 500 psi (34 bar) P-635 possible. For termsETFE and conditions other variables. Product and material performance PEEK Tee for 1/16” OD Tubing 1/4-28 Flat-Bottom (3) XP-235 ratings are provided 0.020” (0.50 mm) 2.9field µL 1,000 psi (69 bar) P-712 of sale please visit www.idex-hs.com/ as guides only. Individual PEEK for 1/8” 1/4-28 Flat-Bottom (3) XP-335 tests should be0.050” (1.25 mm) 17.5 µL 500 psi (34 bar) P-713 performed by customers to determine legal-notices. Terms andTee prices are OD Tubing given your particular PEEK Teenotice. for 1/16” OD Tubing 1/4-28 Flat-Bottom (3) XP-235 safe operating parameters 0.040” (1.00 mm) 11.4 µL 1,000 psi (69 bar) P-714 to change without subject

RELATED PRODUCTS

NOTE

P-722 P-723

PEEK Cross for 1/16” OD Tubing PEEK Cross for 1/8” OD Tubing

ORDERING FLUIDIC CONNECTIONS FLUIDICS INFORMATION

IDX2398-1_Catalog.indb 86 IDX2398-1_Catalog-BioTech.indb 2

1/4-28 Flat-Bottom 1/4-28 Flat-Bottom

CONNECTORS

(4) XP-235 (4) XP-335

procedures and use. IDEX Health & Science facilities 0.020” (0.50 mm) 3.8 µL are certified ISO 9001.

0.050” (1.25 mm)

LOW PRESSURE MULTIPORT CONNECTORS

22.8 µL

TEES & CROSSES

1,000 psi (69 bar) 500 psi (34 bar)

www.biotech.se

Qty. ea. ea. ea. ea. ea. ea. ea. ea. ea.

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:33 PMPM

idex-hs.com Delrin®, polypropylene, ETFE, or PEEK Versions

These luer adapters were designed to work in a variety of applications. By connecting any male luer to any female luer, you can create your own quick connect union or adapter. Each Quick Connect Luer Adapter conforms to ISO requirements for medical luer taper configuration and performance (45 psi/3.1 bar).

FLUIDIC CONNECTIONS

Laser Products

Adapts luers to 1/4-28, 10-32, 5/16-24, or M6 threaded ports

FLUIDICS

Quick Connect Luer Adapters

Fluidics Products

Find fittings to connect tubing to the threaded ports of these adapters in the Fittings chapter, starting on page 30.

+1 760 438 2131

Please Note: Our Female Quick Connect Luer Adapters can be used with any of the Male Luers on this page, i.e., those with and without lock hubs.

Optical APPLICATION FiltersNOTE semrock.com

+1 585 244 7220 P-604, P-618, P-624

Female Luer to 1/4-28 Male

Federal Taxpayer Identification Returns must be authorized in 0.40” 0.78” To economically an HPLC pump, number is 01-0736657;prime European advance. Please contact(1.02 us within cm)(1.98 cm) simply remove the 10-32 fitting on the Taxpayer Identification number 30 days of purchase for your outlet check valve (standard on mostReturns Material Authorization is DE 146581180.

models), insert a P-642 luer adapter,(RMA) attach Number. A restocking fee a syringe (such as our B-310) and draw ORDER PROCESSING/ maythe apply. To request a Return SHIPPING mobile phase through the pump head. Materials Authorization for IDEX

ORDERING INFORMATION FLUIDICS FLUIDIC CONNECTIONS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 87 2

HOW TO FIND A LOCAL DISTRIBUTOR FOR FLUIDICS PRODUCTS 0.75”

0.75” (1.91 cm)

cm) For a complete(1.91 distributor listing please visit www.idex-hs.com/ 0.41” distributors or(1.04 email: cm)

0.41” (1.04 cm)

Female Luer

CustomerService.hsEurope@ to 10-32 Male to 10-32 Male idexcorp.com

to 10-32 Female

Product purchased through a Distributor must be returned directly to that Distributor. Please contact them for Return Material Authorization procedures.

Asia: CustomerService.hsAsia@ idexcorp.com

DIRECT FROM OUR GLOBAL DISTRIBUTION NETWORK IDEX Health & Science has established relationships with a global network of Distributors that offer outstanding product support and assistance. P-655, P-675 In order to meet our customer’s Luer toof1/4-28 needs, and theMale demands beingFemale a global supplier, we have come to rely on our authorized Distributors to provide value-added service and support of our products. While we are happy to take your order directly, we encourage you to contact your local IDEX Health & Science Distributor.

LUER ADAPTERS

Female Luer to 1/4-28 Female

US: IHSOrders@idexcorp.com P-642 P-719 Europe:

Health & Science products visit P-629 www.idex-hs.com/return. Female Luer

CONNECTORS

P-628

Our customer 0.91”service team will help cm) you contact(2.31 a distributor in your area.

0.98” (2.49 cm)

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS 0.44” For a complete distributor listing (1.12 cm) please visit www.semrock.com/ P-656 Male Luer international-distributors.aspx

to 10-32 Female

P-657, P-677

0.42” (1.07 cm)

Male Luer to M6 Female

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular procedures and use. IDEX Health & Science facilities are certified ISO 9001.

QUICK CONNECT LUER ADAPTERS

OPTICS

Male Luer to 1/4-28 Male

COLUMN HARDWARE

TERMS

P-619, P-625

DEGASSERS

0.41” (1.04 cm) 0.78” (1.98 cm)

0.47” (1.19 cm)

0.46” (1.17 cm)

(luer end of P-604 different To prevent a chemical spill when than shown) disconnecting your solvent reservoir tubing from the pump, try our Quick-Stop Valveour onU.S. page 139. ForLuer yourCheck information, RETURN OF MATERIALS

0.93” (2.36 cm)

0.82” (2.08 cm)

VALVES

Our A-626 Bottle Cap Plug (page 55) can be used to plug any of the female luer adapters on this page.

Shutter Products

www.biotech.se

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:33 PMPM

2 88

Quick Connect Luer Adapters (Cont.) Fluidics Products

FLUIDICS FLUIDIC CONNECTIONS

Luer-To-MicroTight® Adapter Easily connect 360 µm OD tubing to a syringe

The Luer-to-MicroTight Adapter is ideal for infusing sample into lab-on-a-chip devices. This product is made entirely of biocompatible PEEK polymer and introduces only 14 nL of additional volume to the flow path. Use it to directly connect a luer-tip syringe or other product that terminates with a standard male luer to 360 µm OD capillary tubing without tubing sleeves (see photo). MicroTight Fittings are included.

idex-hs.com

Laser Products

0.75” (1.91 cm)

P-662 Luer-to-MicroTight Adapter, shown with a B-310 Syringe (see +1table 760 438 2131 below) and PEEK capillary tubing (page 16), not included. 0.44” (1.12 cm)

P-662

Luer-To-MicroTight Adapter for Luer to 360 µm OD tubing with fittings included

Optical Filters

Shutter Products

+1 585 244 7220

VALVES

semrock.com

OPTICS

COLUMN HARDWARE

DEGASSERS

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

ORDER PROCESSING/ SHIPPING

Quick Connect Luer Adapters

HOW TO FIND A LOCAL DISTRIBUTOR FOR FLUIDICS PRODUCTS For a complete distributor listing please visit www.idex-hs.com/ distributors or email: US: IHSOrders@idexcorp.com

Orders placed on our website process Europe: Partship No. as specified during Description Lock Hub Material and the CustomerService.hsEurope@ checkout process. Orders that are QUICK CONNECT LUER ADAPTERS Product purchased through a idexcorp.com placed subject to FB, M Luer to 1/4-28 Nat. Delrin N/A P-604 via fax/email willFbe Distributor must be returned aP-618 $100 minimum order quantity F Luer to and 1/4-28 FB, M Nat. PP N/A Asia: directly to that Distributor. Please typically one business Luer to 1/4-28 FB, M Nat. PP None * P-619 process within M CustomerService.hsAsia@ contact them for Return Material day and ship within twoFbusiness days.FB, M Luer to 1/4-28 Nat. ETFE N/A P-624 idexcorp.com Authorization procedures. Customers who have established M Luer to 1/4-28 FB, M Nat. ETFE None * P-625 Our customer service team will help contract F Luerplace to 1/4-28 FB, F Nat. ETFE N/A P-628 pricing terms must you contact a distributor in your area. DIRECT FROM OUR GLOBAL catalog their F Luer to 10-32 C, F Nat. ETFE N/A P-629 orders directly with DISTRIBUTION NETWORK Customer Service representative. F Luer to 10-32 C, M Nat. ETFE N/A P-642 HOW TO FIND A LOCAL IDEX Health & Science has established M Luer to 1/4-28 FB, F Red PEEK Black PEEK P-655 All shipments are FCA unless DISTRIBUTOR FOR relationships with a global network M Luer to 10-32 C, F Nat. PEEK Black PEEK P-656 SEMROCK PRODUCTS otherwise noted. For orders not of Distributors that offer outstanding Luer to M6 FB, F Black PEEK Black PEEK P-657 placed via our website, M shipping For a complete distributor listing product support and assistance. Luer to 1/4-28 FB, F Red PEEK N/A P-658 charges will be prepaidFand added to please visit www.semrock.com/ In order to meet our customer’s F Luer to 10-32 C, F Nat. PEEK N/A P-659 the invoice. Or, if requested, we will international-distributors.aspx needs, and the demands of being F Luer to M6 FB, F Black PEEK N/A P-660 charge your carrier account number. a global supplier, we have come to F Luer to 5/16-24 FB, M Nat. ETFE N/A P-661 rely on our authorized Distributors M Luer to 1/4-28 FB, F Red ETFE Natural PPfor use with P-675 The products in this catalog are intended TERMS to provide value-added service and M Luer to M6 FB, F Black ETFE P-677 analytical, biotechnology andNatural diagnosticPP equipment support of our products. While we are Credit cards are accepted for orders and accessories. THE MANUFACTURERS OF THE F Luer to 1/4-28 FB, F Red ETFE N/A P-678 PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your order directly, we placed within the United States. F Luer to M6 FB, F Black ETFE N/A P-680 LIABILITY WHATSOEVER DUE TO ANY MISUSE encourage you to contact your local Purchase orders may also be used by M Luer to 1/4-28 FB, M Nat. PEEK Blackthe PEEK P-683 OF THEIR PRODUCTS. Of course, safe use of IDEX Health & Science Distributor. qualified customers. No international our products depends on ourN/A customers, since it is F Luer to M6 FB, M Black ETFE P-686 credit card payment is possible. you who select and control the protective gear and F Luer to 10-32 C, M Nat. PEEK N/A P-719 safety procedures used, as well as the pressures, No international shipments are SYRINGE WITH MALE LUER LOCK temperatures, solvents, samples, ventilation, and possible. For terms and conditions other variables. Product and material performance 10 cc Disposable Luer-Lock Syringe. For use with any Female Luer Adapter B-310 of sale please visit www.idex-hs.com/ ratings are provided as guides only. Individual field LUER-TO-MICROTIGHT ADAPTER tests should be performed by customers to determine legal-notices. Terms and prices are Luer-to-MicroTight Adapter (1) F-152, (1) P-416 safe operating parameters given 0.006” (0.150 mm) P-662 your particular subject to change without notice.

Thru-hole

Qty.

0.05” (1.3 mm) 0.05” (1.3 mm) 0.05” (1.3 mm) 0.05” (1.3 mm) 0.04” (1.0 mm) 0.04” (1.0 mm) 0.04” (1.0 mm) 0.05” (1.3 mm) 0.04” (1.3 mm) 0.05” (1.3 mm) 0.05” (1.3 mm) 0.05” (1.3 mm) 0.05” (1.3 mm) 0.05” (1.3 mm) 0.05” (1.3 mm) 0.05” (1.3 mm) 0.05” (1.3 mm) 0.05” (1.3 mm) 0.05” (1.3 mm) 0.04” (1.0 mm) 0.05” (1.3 mm) 0.05” (1.3 mm)

ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea. ea.

0.05” (1.3 mm)

ea.

45 psi (2.4 bar)

ea.

F = Female (internal) threads; M = Male (external) threads; Nat. = Natural; N/A = Not Applicable;procedures and use. IDEX Health & Science facilities PP = Polypropylene; FB = Flat-Bottom; C = Coned are certified ISO 9001. * Slip-type male luer.

ORDERING FLUIDIC CONNECTIONS FLUIDICS INFORMATION

IDX2398-1_Catalog.indb 88 IDX2398-1_Catalog-BioTech.indb 2

CONNECTORS

LUER ADAPTERS

QUICK CONNECT LUER ADAPTERS

www.biotech.se

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:33 PMPM

LuerTight Fittings

™

idex-hs.com Luer fittings for fluoropolymer tubing

Laser Products

For 1/16” and 1/8” OD tubing

+1 760 438 2131

Our LuerTight fittings are specifically designed to connect fluoropolymer tubing without barbs or nuts! By integrating ferrules into the luer bodies, LuerTights will reliably hold your tubing in place while giving you the convenience of a luer connection. An inline set of LuerTight fittings provides a quick and easy disconnection option. LuerTight connections are also less bulky and more economical than nut-to-luer style fittings. The bodies of these products are manufactured from polypropylene and the ferrules, where used, are made of ETFE.

P-836

Optical Filters

Ferrules (included)

P-835 Tubing (not included)

Shutter Products

semrock.com

FLUIDIC CONNECTIONS

Quick disconnect and barbless

FLUIDICS

Fluidics Products

+1P-837 585 244 7220 LuerTight Fittings System for 1/16” OD tubing Ferrule (included)

VALVES

P-831

P-830 Tubing (not included)

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

NOTE

DISTRIBUTION NETWORK

procedures and use. IDEX Health & Science facilities

Male Fitting for 1/16” OD Tubing (1) Ferrule P-836 are certified ISO 9001. Female = internal receiving luer pocket; Male = external luer nose (surrounded by internally-threaded locking ring) ORDERING INFORMATION FLUIDIC CONNECTIONS FLUIDICS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 89 2

CONNECTORS

LUER ADAPTERS

LUERTIGHT FITTINGS

N/A

Pressure Rating

Qty.

100 psi (7 bar) 100 psi (7 bar)

ea. ea.

N/A N/A N/A N/A N/A

ea. ea. ea. ea. ea.

www.biotech.se

OPTICS

HOW TO FIND A LOCAL IDEX Health & Science has established DISTRIBUTOR FOR relationships with a global network SEMROCK PRODUCTS of Distributors that offer outstanding For a complete distributor listing product support and assistance. please visit www.semrock.com/ In order to meet our customer’s international-distributors.aspx needs, and the demands of being a global supplier, we have come to rely on our authorized Distributors The products in this catalog are intended for use with TERMS to provide value-added service and analytical, biotechnology and diagnostic equipment support of our products. While we are Credit cards are accepted for orders and accessories. THE MANUFACTURERS OF THE Part No. Description Includes Thru-hole PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your order directly, we placed within the United States. LIABILITY WHATSOEVER DUE TO ANY MISUSE LUERTIGHT FITTINGS encourage you to contact your local Purchase orders may also SYSTEMS be used by OF THEIR PRODUCTS. Of course, the safe use of LuerTight System for 1/16” OD Tubing (1) P-835, (1) P-836, (1) P-830T N/A P-837 IDEX Health & Science Distributor. qualified customers. No international our products depends on our customers, since it is LuerTight System for 1/8” OD Tubing (1) P-830, (1) P-831, (1) N/A gear and P-838 card payment credit is possible. youP-830T who select and control the protective safety procedures used, as well as the pressures, LUERTIGHT FITTING COMPONENTS No international shipments are temperatures, solvents, samples, ventilation, and Female Fitting for 1/8” OD Tubing (1) Ferrule N/A P-830 possible. For terms and conditions other variables. Product and material performance Plug to swage Ferrules into P-835 and P-830 N/A P-830T of sale please visitSet www.idex-hs.com/ ratings are provided as guides only.N/A Individual field Maleand Fitting for are 1/8” OD Tubing No Ferrule Requiredtests should be performed by customers N/A to determine P-831 legal-notices. Terms prices safe operating parameters given your particular Fitting for 1/16” OD Tubing (1) Ferrule N/A P-835 to changeFemale subject without notice.

COLUMN HARDWARE

HOW TO FIND A LOCAL

DISTRIBUTOR FOR Returns must be authorized in FLUIDICS PRODUCTS advance. Please contact us within 1.06” For a complete distributor listing 30 days of purchase for your (2.69 cm) please visit www.idex-hs.com/ Returns Material Authorization P-838 (RMA) Number. A restocking LuerTight Fittingsfee System for 1/8”distributors OD tubing or email: may apply. To request a Return US: Materials Authorization for IDEX IHSOrders@idexcorp.com Health & Science products visit Europe: www.idex-hs.com/return. CustomerService.hsEurope@ Product purchased through a idexcorp.com Distributor must be returned Asia: directly to that LuerTight Distributor. Please fittings are designed to be used exclusively within the LuerTight family. CustomerService.hsAsia@ contact them for Return Material Combining LuerTight fittings with non-LuerTight luer products may result idexcorp.com Authorization procedures. in a poor connection. Our customer service team will help you contact a distributor in your area. DIRECT FROM OUR GLOBAL

DEGASSERS

ORDER PROCESSING/ SHIPPING

RETURN OF0.50” MATERIALS (1.27 cm)

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:33 PMPM

2 90

FLUIDICS FLUIDIC CONNECTIONS

Barbed Connectors

Fluidics Products idex-hs.com

Our Type 1 Barbed Unions have been engineered to effectively join two pieces of soft-walled tubing together. This type of connector is typically the connector of choice for joining two peristaltic tubes with similar inner diameters together. Our unions are manufactured from either polypropylene or nylon.

Laser Products +1 760 438 2131

Barbed to Barbed Adapters Adapters on this page feature various luer to barb adaptations Adapters on the next page feature a variety of barb-to-barb connectors

Optical Filters

Shutter Products

VALVES

semrock.com

Use these barbed adapters to connect peristaltic-type flexible tubing for general, low pressure applications. The polypropylene used to manufacture the majority of these products is a Class VI material. Due to the low melt point of polypropylene (PP), these adapters are not autoclavable, however, they can be sterilized via gamma radiation. There +1are585 244to7220 also Barb Female Luer-Lock connectors available from ETFE, which has superior solvent resistance and a higher temperature rating (80 ºC).

Barbed “Y” Adapters Our Barbed “Y” Adapters, manufactured from polypropylene, are engineered to effectively

OPTICS

COLUMN HARDWARE

DEGASSERS

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

TERMS Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by qualified customers. No international credit card payment is possible. No international shipments are possible. For terms and conditions of sale please visit www.idex-hs.com/ legal-notices. Terms and prices are subject to change without notice.

RETURN OFjoin MATERIALS HOW TO FIND A LOCAL three pieces of soft-walled tubing together in a Y configuration, offering less turbulence DISTRIBUTOR FOR Tee Connector. This type of connector works Returns must be authorized and gentlerinmixing of fluids than a traditional FLUIDICS PRODUCTS advance. Please contact us within

well for joining three peristaltic tubes with similar inner diameters together.

For a complete distributor listing 30 days of purchase for your please visit www.idex-hs.com/ Returns Material Authorization distributors or email: (RMA) Number. A restocking fee may apply. To request a Return US: Materials Authorization for IDEX IHSOrders@idexcorp.com Health & Science Three products visit sizes, for 1/16”, 1/8”, and 3/16” ID flexible tubing barb Europe: www.idex-hs.com/return. CustomerService.hsEurope@ Adapt to 1/4-28 flat-bottom, 5/16-24 flat-bottom, or 10-32 coned receiving ports Product purchased through a idexcorp.com Distributor must be returned Asia: adapters directly to that These Distributor. Please make it easy to connect flexible tubing to any standard 1/4-28 flatCustomerService.hsAsia@ contact them for Return Material bottom or 10-32 coned idexcorp.com receiving port. Simply thread the adapter into a receiving port Authorization procedures. and slip tubing over the barbed stem to create a reliable low pressure connection. Our customer service team will help you contact a distributor in your area. DIRECT FROM OUR GLOBAL

Thread to Barbed Adapters

DISTRIBUTION NETWORK

IDEX Health & Science has established 0.44” 0.86” (1.12 cm) relationships with a global network (2.18 cm) of Distributors that offer outstanding product support and assistance. In order to meet our customer’s needs, and the demands of being a global supplier, we have come to P-663 rely on our authorized 10-32 toDistributors 1/16” ID tubing to provide value-added service and support of our products. While we are happy to take your order directly, we encourage you to contact your local IDEX Health & Science Distributor.

0.47” 0.88” (1.19 cm) (2.24 cm)

P-668

1/4-28 to 1/16” ID tubing

ORDERING FLUIDICS INFORMATION FLUIDIC CONNECTIONS

IDX2398-1_Catalog.indb 90 IDX2398-1_Catalog-BioTech.indb 2

CONNECTORS

HOW TO FIND A LOCAL 0.47” DISTRIBUTOR (1.19 cm) 0.88” FOR cm) SEMROCK (2.24 PRODUCTS For a complete distributor listing please visit www.semrock.com/ international-distributors.aspx P-646

1/4-28 to 1/16” ID tubing

P-647

0.47” (1.19 cm)

0.99” (2.51 cm)

1/4-28 to 1/8” ID tubing

01.21” (3.07 cm)

P-648

1/4-28 to 3/16”

The products in this catalog are intended for use with ID tubing analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO 0.47” LIABILITY(1.19 WHATSOEVER DUE TO ANY MISUSE cm) 1.27” OF THEIR PRODUCTS. Of course, the safe use of (3.23 cm) our products depends on our customers, since it is 0.37” you who select and control the protective gear and (0.94 cm) 0.90” (2.29 cm) safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular procedures and use. IDEX Health & Science facilities P-689 P-692 are certified ISO 9001. 5/16-24 to 3/16” ID tubing 1/4-28 to 0.020”–1/32”ID tubing

PERISTALTIC TUBE CONNECTORS

BARBED CONNECTORS

www.biotech.se

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:33 PMPM

FLUIDICS

Fluidics Products idex-hs.com

Swivel Barb Adapters Barb connection spins freely from the nut to prevent twist during installation Manufactured from polypropylene

+1 760 438 2131

RELATED PRODUCTS

The Swivel Barb Adapters from IDEX Health & Science are made up of two captive pieces acting as a one-piece fitting for ease of use. Manufactured from polypropylene and available in three barb sizes, the Swivel Barb will facilitate connection between flexible tubing to a 1/4-28 flat-bottom port. The barbed insert spins freely from the threaded nut in order to prevent the tubing from twisting during installation.

Optical Filters

Shutter Products

semrock.com

+1 585 244 7220

To connect low pressure fluoropolymer tubing, try the LuerTight™ Adapters on page 89.

For peristaltic tubing, see page 15.

D-646

1/4-28 to 1/16” ID tubing

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

TERMS

ORDERING INFORMATION FLUIDICS FLUIDIC CONNECTIONS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 91 2

D-648

1/4-28 to 1/8” ID tubing

HOW TO FIND A LOCAL

DISTRIBUTOR FOR Returns must be authorized in FLUIDICS PRODUCTS advance. Please contact us within For a complete distributor listing 30 days of purchase for your Our Luer to Barbed Adapters arewww.idex-hs.com/ an excellent choice when connecting between softplease visit Returns Material Authorization distributors or email: such as a syringe or a low-pressure filter, for tubing products, (RMA) Number.walled A restocking feeand luer-based may apply. To example. request a Return US:different configurations, allowing you to connect various sizes We offer several Materials Authorization for IDEX of soft-walled tubing to IHSOrders@idexcorp.com receiving ports that accept a male luer “slip” style connection; a Health & Science products visit Europe: male luer “lock” style connection; and a female-luer style of connector. www.idex-hs.com/return. CustomerService.hsEurope@ Product purchased through a idexcorp.com Distributor must be returned Asia: B directly to that Distributor. Please F B CustomerService.hsAsia@ contact them for Return Material B idexcorp.com E Authorization procedures. E D C Our customer service team will help A C you contact a distributor in your area. DIRECT FROM OUR GLOBAL C A

Luer to Barbed Adapters

E DISTRIBUTION NETWORK

IDEX Health & Science has established relationships with a global network of Distributors that offer outstanding product support and assistance. Barb Slip-Type In order to meet ourtocustomer’s Male Luer Adapters needs, and the demands of being a global supplier, we have come to rely on our authorized Distributors to provide value-added service and support of our products. While we are happy to take your order directly, we encourage you to contact your local IDEX Health & Science Distributor.

CONNECTORS

HOW TO FIND A LOCAL DISTRIBUTOR FOR SEMROCK PRODUCTS For a complete distributor listing Barbwww.semrock.com/ to Male please visit Luer with international-distributors.aspx Lock Ring Adapters

F D Barb to Female Luer-Lock Connectors

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular procedures and use. IDEX Health & Science facilities are certified ISO 9001.

PERISTALTIC TUBE CONNECTORS

BARBED CONNECTORS

OPTICS

1/4-28 to 3/32” ID tubing

COLUMN HARDWARE

D-647

DEGASSERS

ORDER PROCESSING/ SHIPPING

RETURN OF MATERIALS

0.90” (2.29 cm)

VALVES

To connect peristaltic tubing to low pressure fluoropolymer tubing, see page 92.

0.90” (2.29 cm)

FLUIDIC CONNECTIONS

Laser Products

www.biotech.se

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:33 PMPM

2 92

Barbed Connectors (Cont.) Conical Adapters

FLUIDICS

Fluidics Products

Direct connect 1/16” and 1/8” OD rigid and semi-rigid tubing to peristaltic tubing Accept 0.020”–1/8” (0.50–3.2 mm) ID peristaltic tubing

idex-hs.com

FLUIDIC CONNECTIONS

Biocompatible flow path with excellent chemical compatibility

Conical Adapters provide a reliable connection between rigid/semi-rigid tubing and peristaltic-type flexible tubing, such as Tygon® and PharMed®. These adapters are composed of a PEEK polymer female nut, our Super Flangeless™ ferrule system and an ETFE or PEEK conical adapter body. The narrow coned end of the adapter body allows peristaltic tubing to slide on more easily than it does onto conventional barbed adapters. Peristaltic tubing is also easier to remove from our Conical Adapters, since no cutting or excessive pulling is required.

Laser Products +1 760 438 2131 APPLICATION NOTE To help secure peristaltic tubing more firmly to the Conical Adapters, simply attach a cable tie to the outside of the peristaltic tubing once it has been placed onto the Adapter body.

Optical Filters

VALVES

semrock.com

DEGASSERS COLUMN HARDWARE OPTICS

TERMS Credit cards are accepted for orders placed within the United States. Purchase orders may also be used by qualified customers. No international credit card payment is possible. No international shipments are possible. For terms and conditions of sale please visit www.idex-hs.com/ legal-notices. Terms and prices are subject to change without notice.

IDX2398-1_Catalog.indb 92 IDX2398-1_Catalog-BioTech.indb 2

0.40” (1.02 cm)

0.40”

cm) +1P-794 585 244 (1.02 7220 P-797

1/4-28 Adapter Body

RETURN OF MATERIALS

0.40” (1.02 cm)

P-799

Rigid or Semi-Rigid Tubing (not included)

HOW TO FIND A LOCAL

Super Flangeless FOR DISTRIBUTOR P-798 Returns must be authorized in Ferrule System FLUIDICS PRODUCTS Conical Adapter advance. Please contact us within Female Nut For a complete distributor listing 30 days of purchase for your please visit www.idex-hs.com/ Returns Material Authorization distributors or email: (RMA) Number. A restocking fee may apply. To request a Return US: Materials Authorization for IDEX IHSOrders@idexcorp.com Health & Science products visit These unique adapters connect Europe: peristaltic tubing to standard 1/16” or 1/8” OD tubing. www.idex-hs.com/return. CustomerService.hsEurope@ A specially-designed nose allows the peristaltic tubing to simply press fit over the nose Product purchased through a idexcorp.com and then be held tightly in place by the retainer sleeve. Your 1/16” OD tubing may then Distributor must be returned Asia: connected directly to that be Distributor. Pleasewith the Flangeless Fittings supplied with the adapter. To connect your CustomerService.hsAsia@ contact them for Return Material peristaltic tubing to tubing with a different OD, simply replace the supplied fittings with idexcorp.com Authorization procedures. your choice of Flangeless Fittings from page 45. Our customer service team will help OneOUR popular application for thesea distributor adaptersinisyour to area. use them as “stops” for your peristaltic you contact DIRECT FROM GLOBAL

Peristaltic Tubing Adapters

DISTRIBUTION NETWORK pump. By doing so, you can reduce the amount of peristaltic tubing required for your IDEX Health & Science has established flow path, thus reducingHOW cost.TO FIND A LOCAL DISTRIBUTOR FOR relationships with a global network SEMROCK PRODUCTS of Distributors that offer outstanding product support and assistance. In order to meet our customer’s needs, and the demands of being a global supplier, we have come to rely on our authorized Distributors to provide value-added service and support of our products. While we are happy to take your order directly, we encourage you to contact your local IDEX Health & Science Distributor.

For a complete distributor listing Adapter Body please visit www.semrock.com/ international-distributors.aspx 1/4-28

Retainer Sleeve

The products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment Adapter Cap and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE Peristaltic 0.94”0.94” OF THEIR Of course, the safe use of Tubing cm) (2.39 (2.39 cm)PRODUCTS. our products depends on our customers, since it is (not included) you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular P-757 procedures and use. IDEX Health & Science facilities 0.62” Peristaltic Tubing Adapter includes (1.57 cm) 9001. P-200/P-235 Flangeless Fittings, are certified ISO 0.62”

and 3 sizes of retainer sleeves ORDERING FLUIDICS INFORMATION FLUIDIC CONNECTIONS

1.30” (3.30 cm)

Shutter Products Peristaltic Tubing (not included)

For your information, our U.S. Federal Taxpayer Identification number is 01-0736657; European Taxpayer Identification number is DE 146581180.

1.30” (3.30 cm)

1.05” (2.67 cm)

CONNECTORS

PERISTALTIC TUBE CONNECTORS

(1.57 cm)

BARBED CONNECTORS

www.biotech.se

www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:33 PMPM

FLUIDICS

Fluidics Products idex-hs.com

Laser Products BARBED TO BARBED ADAPTERS Part No.

Tubing ID

Material

Qty.

P-801

0.06” (1.5 mm)

Polypropylene Polypropylene

ea. ea.

+1P-802 760 438 2131 0.12” (3.0 mm) BARBED “Y” CONNECTORS P-860

0.06” (1.5 mm)

Polypropylene

ea.

P-861 P-862

0.10” (2.5 mm)

Polypropylene

ea.

P-863

0.12” (3.0 mm) 0.18” (4.8 mm)

Polypropylene Polypropylene

ea. ea.

P-864

0.25” (6.4 mm)

Polypropylene

ea.

Optical Filters

Shutter Products

semrock.com

+1 585 244 7220

THREAD TO BARBED ADAPTERS Part No. P-663

Description Barb Adapter, 1/16” (1.55 mm) ID Tubing

P-646 P-647 P-648

Barb Adapter, 1/16” (1.55 mm) ID Tubing Barb Adapter, 1/8” (3.20 mm) ID Tubing

Material ETFE

Threads 10-32 Coned

Thru-hole 0.04” (1.0 mm)

Qty. ea.

ETFE ETFE

1/4-28 Flat-Bottom 1/4-28 Flat-Bottom

0.04” (1.0 mm) 0.08” (2.0 mm)

ea. ea.

Barb Adapter, 3/16” (4.75 mm) ID Tubing Barb Adapter, 1/16” (1.55 mm) ID Tubing Barb Adapter, 3/16” (4.75 mm) ID Tubing

ETFE PEEK ETFE

1/4-28 Flat-Bottom 1/4-28 Flat-Bottom 5/16-24 Flat-Bottom

0.10” (2.5 mm) 0.04” (1.0 mm) 0.10” (2.5 mm)

ea. ea. ea.

P-692

Barb Adapter, 0.020” to 1/32” (0.50 to 0.80 mm) ID Tubing

PEEK

1/4-28 Flat-Bottom

0.02” (0.5 mm)

ea.

0.03” (0.75 mm) 0.056” (1.5 mm) 0.08” (2.0 mm)

ea. ea. ea.

SWIVEL BARB ADAPTERS D-646 D-647

Swivel Barb Adapter, 1/16” (1.55 mm) ID Tubing Swivel Barb Adapter, 3/32” (2.40 mm) ID Tubing Swivel Barb 1/8” (3.20 mm) ID TubingOF D-648 For your information, ourAdapter, U.S. RETURN

MATERIALS

Federal Taxpayer Identification BARB TO SLIP-TYPE MALE LUER ADAPTERS Returns must be authorized in number European Part No. is 01-0736657; Description advance. Please contact us within Taxpayer Identification Male Luersnumber (Slip-type) for use with30 1/16” IDof (1.55 mm) Tubing days purchase for your P-854 A=0.046” B=0.064” C=0.090” D=0.129” E=0.711” F=0.198” H=0.384” is DE 146581180. Returns Material Authorization

Polypropylene Polypropylene Polypropylene HOW TO FIND

1/4-28 Flat-Bottom 1/4-28 Flat-Bottom 1/4-28 Flat-Bottom LOCAL

A DISTRIBUTOR FOR FLUIDICS MaterialPRODUCTS

ORDERING INFORMATION FLUIDIC CONNECTIONS FLUIDICS

IDX2398-1_Catalog.indb IDX2398-1_Catalog-BioTech.indb 93 2

P-799 P-794

CONNECTORS

ea. ea. ea.

ea. ea. ea. ea. ea. Thru-Hole 0.030" (0.75 mm) 0.070" (1.78 mm)

Qty. ea. ea.

Thru-Hole 0.020” (0.50 mm) 0.040” (1.0 mm) 0.040” (1.0 mm) 0.060” (1.5 mm)

ea. ea. ea. ea.

ea. ea. ea. ea. ea. ea.

procedures and use. IDEX Health & Science facilities Natural ETFE are certified ISO 9001.

PERISTALTIC TUBE CONNECTORS

Natural PEEK

BARBED CONNECTORS

www.biotech.se

OPTICS

Conical Adapter Body Conical Adapter Body

ea.

COLUMN HARDWARE

P-691 P-692

Qty.

DEGASSERS

For a complete distributor listing PP please visit www.idex-hs.com/ These slip-type male luer fittings are for use in systems for which luer lock rings are not desired. distributors or email: (RMA) Number. A restocking fee BARB TOPROCESSING/ MALE LUER WITH LOCK RING ADAPTERS ORDER may apply. To request a Return US: Male Luers with Lock Ring for use with 1/16” ID (1.55 mm) Tubing SHIPPING PP P-850 Materials Authorization for IDEX IHSOrders@idexcorp.com A=0.049” B=0.065” C=0.090” E=0.583” F=0.434” Orders placed on our website process & Science visit Male Luers with Lock Ring for use Health with 3/32” ID (2.40 products mm) Tubing Europe: PP P-851 and ship as specified the C=0.139” E=0.681” www.idex-hs.com/return. A=0.071”during B=0.100” F=0.436” CustomerService.hsEurope@ checkout process. that areRing for use with 1/8” ID (3.20 mm) Tubing Male Orders Luers with Lock PP P-852 Product purchased through a idexcorp.com A=0.099” C=0.184” E=0.777” F=0.436” placed via fax/email willB=0.132” be subject to Distributor must be returned TO FEMALE aBARB $100 minimum orderLUER-LOCK quantity andCONNECTORS Asia: directly to that Distributor. Please Female Luer Connectors for use with 1/16” ID (1.55 mm) Tubing typically CustomerService.hsAsia@ PP P-857 process within one business contact them for Return Material A=0.030” B=0.063” C=0.106” D=0.100” E=0.598” F=0.253” day and ship within two business days. idexcorp.com Authorization procedures. Female Luer Connectors for use with 3/32” ID (2.40 mm) Tubing PP P-858 Customers who have established A=0.056” B=0.102” C=0.145” D=0.100” E=0.648” F=0.253” Our customer service team will help contract pricing termsLuer must place for use with 1/8” ID (3.20 mm) Tubing Female Connectors you contact a distributor in your area. DIRECT FROM OUR GLOBAL PP P-859 catalog ordersA=0.080” directly with theirC=0.187” D=0.100” E=0.733” F=0.253” B=0.135” DISTRIBUTION NETWORK For use with 1/16” (1.55 mm) ID Tubing Customer Service representative. ETFE P-870 HOW TO FIND A LOCAL IDEX Health & Science has established A=0.030” B=0.063” C=0.106” D=0.100” E=0.598” F=0.253” All shipments For areuse FCA unless DISTRIBUTOR FOR relationships with a global network with 1/8” (3.20 mm) ID Tubing ETFE P-872 SEMROCK PRODUCTS otherwise noted. For orders not C=0.187” D=0.100” A=0.080” B=0.137” E=0.733”that F=0.253” of Distributors offer outstanding placed via our website, shipping PERISTALTIC TUBING ADAPTERS For a complete distributor listing product support and assistance. charges prepaid and added to Part No.will be Description Tubing OD Tubing ID pleasePeristaltic visit www.semrock.com/ In order to meet our customer’s the invoice. Or, if requested, we will Standard Adapter to 0.180”of (4.55 mm) 0.048”– 0.110” (1.20–2.80 mm) P-757 international-distributors.aspx needs, and theup demands being charge number. Large account Bore Adapter up to (6.35 mm) 0.100”– 0.150” (2.55–3.80 mm) P-767 your carrier a global supplier, we0.250” have come to CONICAL ADAPTER ASSEMBLIES rely on our authorized Distributors in this catalog areID intended for use with TERMS Part No. Description Rigid or Semi-Rigid Tubing OD The products Peristaltic Tubing to provide value-added service and analytical, biotechnology and diagnostic equipment Conical Adapter 0.020”–0.030” (0.50 mm–0.75 mm) P-794 cards are support of our1/16” products. While we are Credit accepted for orders and accessories. THE MANUFACTURERS OF THE Adapter 1/16”order directly, we 1/16”–3/32” (1.55 mm–2.40 mm) P-797 within Conical PRODUCTS IN THIS CATALOG SHALL HAVE NO happy to take your placed the United States. LIABILITY WHATSOEVER DUEmm–2.40 TO ANY MISUSE Conical 1/16”–3/32” (1.55 mm) P-798 encourage you1/8” to contact your local Purchase orders may Adapter also be used by OF THEIR PRODUCTS. Of course, the safe use of Conical No Adapter 3/32”–1/8” (2.40 mm–3.20 mm) P-799 IDEX Health &1/8” Science Distributor. qualified customers. international our products depends on our customers, since it is CONICAL ADAPTER REPLACEMENT PARTS credit card payment is possible. you who select and control the protective gear and safety procedures Partinternational No. Description For Use With Materialused, as well as the pressures, No shipments are temperatures, solvents, samples, ventilation, and Femaleand Nut,conditions 1/8”, 1/4-28 P-798, P-799 Black PEEK F-156 possible. For terms other variables. Product and material performance Nut, 1/16”, 1/4-28 P-794, P-797 Natural PEEK P-420 of sale pleaseFemale visit www.idex-hs.com/ ratings are provided as guides only. Individual field Super Ferrule, P-794, P-797 Yellow ETFE/SST P-259 tests should be performed by customers to determine legal-notices. TermsFlangeless and prices are 1/16” safe operating parameters given your particular Superwithout Flangeless Ferrule, 1/8” P-798, P-799 Yellow ETFE/SST P-359 to change subject notice.

VALVES

P-668 P-689

FLUIDIC CONNECTIONS

Barbed Connectors

www.idex-hs.com www.idex-hs.com

12/2/2016 10/28/16 3:49:52 1:33 PMPM