Edition 3 / October 2021
// MENTAL HEALTH MONTH FIND OUT HOW TRADEMUTT & BEYOND BLUE ARE HELPING TRADIES BY STARTING A CONVERSATION
// PROTECTION FROM
DANGEROUS CHEMICALS
KEY CONSIDERATIONS TO PROTECT WORKERS WHILE USING HAZARDOUS CHEMICALS
// CONNECT WITH A BLACKWOODS TECHNICAL SAFETY SPECIALIST ASSESS | INFORM | EQUIP
1
05 18 20 24 CHEMICAL PROTECTION
Without the proper controls, exposure to chemicals commonly used in the workplace can have short and long-term health effects. Reducing exposure to hazardous substances requires a complete head to toe solution, as well as an emergency response plan.
2
Safety Spotlight
CASE STUDY
WELDING FUMES
MENTAL HEALTH
When a major civil construction project in Victoria recognised the need for a dust suppression system when working with jackhammers, they found a trial underway in the US, but nothing available here in Australia.
Welders are exposed to both physical and chemical hazards in the course of their work, with some of the most common hazards including exposure to dangerous chemicals and fumes, injuries to the eyes through sparks and vapours, fire and explosions, and electric shock.
Mental health is complex, and there is an increasing amount of evidence that workplaces can play an important and active role in maintaining the mental health and wellbeing of their employees.
Edition 3 / October 2021
DO NOT SURRENDER COMFORT FOR SAFETY With an ageing workforce, the number of people using prescription glasses is increasing. Tellingly, there is a common belief that regular prescription eyewear is suitable enough in hazardous workplaces. This is not true. The risks associated are many and anyone who has developed the need for prescription eyewear, would know it’s never the same as before; image distortion, limited peripheral vision, lack of dust protection with regular prescription glasses, are some of the inherent problems. For employers, looking after the health of employee’s eyesight is paramount in providing a safe and efficient workplace. Regular prescription eyewear simply won’t cut it for hazardous areas requiring a level of impact protection from flying materials. With over 500 people hospitalised per year with serious work-related eye injuries, it is imperative that the message gets through to everyone. That is: if you need to use eyewear in the workplace, make sure it is fitted correctly, meets all applicable safety standards, and where necessary, the lenses meet the required prescriptions. “Australian standards require a certification to 1337.6 for all prescription safety eyewear. Eyewear supplied under this standard provides the wearer confidence they have coverage to chemical resistance, impact protection to 1337.6 standards and penetration levels,” says Steve Carter of All Australian Safety. “Regular prescription eyewear doesn’t meet the standard, and the risk is, chemicals, impact or and foreign objects can penetrate causing injury-blindness or even death.” If you use prescription safety glasses, be aware of the following: • Do not surrender comfort for safety • If you use protective eyewear over your regular glasses, ensure that your vision is not impeded. If a worker’s vision is blurred or distorted, then the chance of human error causing an accident increases significantly • What are the best lens options and extras for your situation? For example, most work-related eye injuries are the result of flying materials, such as dust or filings. If this may happen in your workplace, ensure your eyewear has the appropriate side protection and your glasses fit snugly against your face, without significant and potentially dangerous gaps • Again, ensure that all appropriate safety standards are met
CLICK FOR
MORE INFO. Or contact your Technical Safety Specialist
ASSESS | INFORM | EQUIP
3
CHEMICAL PROTECTION PPE OUR SPECIALISTS
WGTP CASE STUDY
‘THINK SAFE. WORK SAFE. BE SAFE.’ It’s that time of year again! October is ‘National Safe Work Month’, an initiative of Safe Work Australia that reminds us about the vital importance of safety in the workplace. The theme for 2021 is ‘think safe. work safe. be safe.’ We all must be responsible for health and safety in the workplace. Blackwoods prides itself on promoting workplace safety and providing expertise and solutions in safety practice. Not surprisingly we are also proud supporters of ‘National Safe Work Month’, and we always find great ways to bring people, including employers, workers, and customers, together in many different environments. Activities have included trade store displays, interviews and pictures with team members discussing what safe work means to them, and the implementation of week-long themes covering such topics as: • Workplace Safety Equipment
• Signage/Traffic Management
• Personal Protective Equipment
• Manual Handling
“We are always conscious of creating greater awareness and how we can improve the safety and health of everyone, both in the workplace and the broader Australian community,” says Amanda Haddad, Head of Health Safety and Wellbeing at Blackwoods. “Our safety team work on a ‘4P’s’ value proposition, which is an extension of our business Strategic Focus. It helps guide us, to ensure we go home the same way we arrived.” ‘think safe. work safe. be safe.’ are six simple words that nevertheless have deep meaning. For example, have a good think right now. How aware are you of all the health and safety issues in your workplace?
Are you across all practices within the Hierarchy of Controls? And what about those safety goggles that don’t fit as well as they used to? Or the boots that you’re beginning to slip in? Remember, ‘think safe. work safe. be safe.’
Every one every day goes home safe
October also signifies ‘Mental Health Month’, which is part of the ‘World Mental Health Day’ campaign. As we have seen with the great work undertaken by TradeMutt and Beyond Blue and many other committed organisations (see page 24) mental health is a major concern in the workplace. Are you looking after your workmates right now? And are you aware of the signs that you or someone close to you may be struggling?
MENTAL HEALTH MONTH
WELDING FUME
SAFE WORK MONTH
CLICK FOR
“I believe ‘think safe. work safe. be safe’, is a tremendous opportunity for everyone in the workplace to reflect on their own personal
and to download a campaign kit for your workplace
commitment to good health and safety.”
WHAT’S NEW
MORE INFO.
4
Safety Spotlight
Amanda Haddad, Head of Health Safety & Wellbeing at Blackwoods
Edition 3 / October 2021
NOT ALL SAFETY EYEWEAR TREATMENTS
ARE CREATED EQUAL
With the risk of chemicals or molten metal splashes, filings spinning from a drill-bit, hazardous dust and vapours hitting our eyes (to name but a few), we can understand why safety eyewear are an essential part of our PPE. However, when it comes to fogging or scratched lenses, it’s not hard to see why these present a further risk, and the two main reasons workers remove or avoid wearing them. To help prevent this problem, employers should protect their employees with the appropriate safety eyewear, containing lenses that have been treated with an effective anti-fog or anti-scratch coating. And when we say ‘effective’, it’s important to note that not all coatings are created equal. In helping make the best decisions about the most appropriate eyewear, the Australia-New Zealand standard AS/NZS 1337.1:2010, outlines the minimum requirements for non-prescription eye and face protectors and other protective eyewear. The Standard aims to assist in the provision of safe, efficient, and comfortable vision in an occupational situation, including consideration to protect against sun glare and optical radiation in a natural environment.
SO, WHAT DOES THE AS/NZS 1337.1:2010 STANDARD TEST FOR? Kowar
Several requirements need to be met before any eye protection can meet the Standard; Optical properties, lateral protection, and impact resistance are just some however, two areas the standard does not test for, is fogging and the scratching of the lens area. This can pose a significant safety issue for workers. Most manufacturers offer some type of Anti-fog and or Anti-scratch treatments to their safety eyewear, however, Blackwoods knows from user feedback that not all anti-fog safety and or anti-scratch treatments are created equal. To help benchmark product performance outside of AS/NZS 1337.1 2010, some manufacturers go a step further to have their products tested, under the European Standard EN 166, specifically the K and N labels.
Koorbat
WHAT DO THE K & N LABELS MEAN? “Anyone familiar with the European Standards would know of K and N labels and their meaning. K relates to surface resistance from small particles, while N is resistance to lens fogging in humid environments including those with persistent condensation,” says Nic Williams, Blackwoods, Product Development Manager. “The new PROSAFE KOORBAT and KOWAR styles meet the K and N testing requirements.” Both PROSAFE styles contain a premium Anti-fog and Antiscratch coating in both clear and smoke lenses. This coating is applied in a proprietary dipping process and then heat-treated to permanently bond to the lens. By using safety glasses with effective coatings helps safeguard workers to help them see clearly for long periods, helping them stay safe and more productive in most environmental conditions.
CLICK FOR
MORE INFO. Or contact your Technical Safety Specialist
ASSESS | INFORM | EQUIP
5
CHEMICAL PROTECTION
COVERALL SELECTION
PPE
HANDLING HARMFUL SUBSTANCES
OUR SPECIALISTS
Chemicals do not differentiate. From the tops of our heads to the soles of our feet, every single millimetre of us can be damaged beyond repair if we are not properly protected against harmful chemicals and substances. In the past few years, there have been several high-profile accidents across Australia that have drawn attention to this issue. People have been seriously injured, and there have been fatalities.
WGTP CASE STUDY
Tragically, as some accidents have shown, workers have been injured because they didn’t have access to suitable PPE (Personal Protective Equipment), and/or weren’t properly guided on correct procedures concerning the handling of harmful substances, including during spills and in clean-up operations.
WHAT’S NEW
MENTAL HEALTH MONTH
WELDING FUME
TYPE & PICTOGRAM
6
Safety Spotlight
Protection from harmful chemicals and substances requires a complete head to toe solution. This includes the use of Personal Protective Equipment (PPE) that meets relative standards, is appropriate for all individual hazards in the workplace, and fits correctly. PPE includes face masks, eyewear, footwear, and coveralls. There are many different types of coveralls, and it can be difficult to determine which type is right for the type of work and workplace. However, there are protective standards in place.
DEFINITION & EXPOSURE LEVEL
PRODUCT STANDARD & YEAR OF PUBLICATION
Resist direct high pressure jet spray
EN 14605:2005/A1:2009
Resists saturating liquid
EN 14605:2005/A1:2009
Protection from airborne solid particulates
EN ISO 13982-1:2004/A1:2010
Repellent to liquid spray/splash
EN 13034:2005/A1:2009
Protection from blood and blood borne pathogens
EN 14126:2003
Anti-static properties
EN 1149-5:2018
Protection from radioactive particulates (Gives no protection against radioactive radiation)
EN 1073-2:2002
Edition 3 / October 2021
“There are various types of coveralls to protect workers from a broad range of chemicals. Most workers will never need to look further than a type 5/6 coverall, to protect them from dry chemical powder & liquid droplets,” says Drew Dauncey, Blackwoods Technical Safety Specialist. “The best way to ensure the correct coverall is selected, is to compare the chemicals being used against a coverall permeation guide.” “No two workplaces are the same so it’s best to engage with a Safety Specialists to ensure that the appropriate protective coverall is identified. We can do the analysis of the chemicals being used with the coverall permeation data to select the correct coverall.” Protective coveralls undergo rigorous testing to ensure that they provide the correct level of protection. Different chemicals will ‘breakthrough’ the coverall at different times so it’s important to understand the permeation data and how they interact with specific environmental conditions. “It’s the very reason why many overalls are disposable and should be replenished frequently.” “While there’s a lot of permeation data available, at the base level employers should familiarise themselves the EN standards and types for guidance.”
Material Style Number
100% Polypropylene Style #: MOV081 PPE Category III
Batch # Size European Standards Pictograms
SIZE: L EN 13034/05+ A1/09 Type 6 EN ISO 13982-1/04+ A1/10 Type 5
2
MORE INFO. Or contact your Technical Safety Specialist
EN 1149-5/18
CARE INSTRUCTIONS:
Care Guideline
CLICK FOR
EN 1073-2/02 Class 2
Read for the instruction for use Wearer (EN ISO 13688)
DO NOT WASH DO NOT BLEACH DO NOT DRY DO NOT IRON DO NOT DRYCLEAN FLAMMABLE FABRIC DO NOT REUSE MADE IN CHINA
Country of Manufacture
“When selecting a chemical coverall for your workplace, ensure they have the EN standards marked on the garment. For example, a type 5/6 should display the pictograms for particles and liquid droplets along with EN 13034 & EN 13982.” “Some, but not all coveralls, will have antistatic properties so it’s imperative that you check for the ‘lightning bolt’ pictogram, if you work in a hazardous electrical environment.” By identifying these key features, you will ensure that workers and workplaces are kept safe from injury and even death. *New Coveralls Arriving Soon
ASSESS | INFORM | EQUIP
7
CHEMICAL PROTECTION PPE OUR SPECIALISTS
WGTP CASE STUDY WELDING FUME
MENTAL HEALTH MONTH WHAT’S NEW
HOW LONG WILL GLOVES PROTECT YOU? If you are working with chemicals, choosing the right protective equipment is critical. Every choice needs to be carefully made. When picking the most suitable gloves, think about this: according to the Chemical Abstracts Service (CAS), there are more than 60 million registered chemicals. Now, think again: Do you know how many different chemicals and mixes are used in your workplace? And how many do you work with? At this point, a line is worth repeating: When it comes to choosing the right protective equipment, every choice needs to be carefully made.
AlphaTec® 58-535
through a material. “By assessing the chemicals that you work with, Ansell Chemical Guardian can determine which material will offer you the most protection for the longest time, from which an appropriate glove selection can be made.” So, when you are choosing the best chemical resistant glove for your need, work with a Technical Safety Specialist to undertake the Ansell Chemical Guardian Program.
Choosing and using fit-for-purpose gloves is an essential part of adhering to safe workplace practices. “Even the most protective chemical resistant glove, may only provide limited protection against the chemicals you are using. In fact, Ansell acknowledges the perfect barrier material, which protects against all chemicals and chemical mixes, is virtually nonexistent,” says Theo Oostveen, Product Portfolio Manager, Ansell Ltd. What does this mean for you? The answer comes in the form of another question. When choosing the most suitable glove, you need to be asking: ‘How long will this glove protect me for?’ It is here that the Ansell Chemical Guardian Program provides support in a highly researched and personalised selection process. Ansell has an extensive data bank that notes the permeation times of about 4500 single chemicals and 100 chemical mixtures into various protective materials. Permeation time is the amount of time taken for a substance to pass
8
Safety Spotlight
CLICK FOR
MORE INFO. Or contact your Technical Safety Specialist
Edition 3 / October 2021
Always put your best foot forward. But how that foot is presented and protected varies from workplace to workplace. If you have a job which exposes you to the chance of accidental splashes of mild chemicals, such as some solvents and acids, you cannot take any chances. You need the correct footwear. The #982 Extreme Series safety boot from Blundstone is a chemical resistant boot with Schoeller® Keprotec® fabric and Kevlar® stitching that is compliant with the internationally agreed European Standard EN 138322:2006. The #982 has been tested against common industrial chemicals sodium hydroxide (Caustic Soda) and Acetic Acid. The boot’s other features include: • Leather upper with TPU bump cap and TPU heel guard • Broad fitting Type One steel toe cap, tested to resist a 200 Joule impact • Rubber outsole to increase slip resistance in varied environments. (Slips, trips and falls are among the leading causes of serious work injuries in Australia). • Heavy duty YKK Vislon® zip with self-clearing gusset behind the zip to prevent chemical penetration • Full bellows tongue externally attached to reduce the possibility of splash access • Electrical hazard resistance
// P ROTECT YOUR FEET
FROM CHEMICALS & ACIDS
The appeal and workplace credibility of the #982 is further enhanced by the fact its creation is a direct result of collaboration between Blundstone’s design team and representatives of Australia’s aluminium manufacturing industry. The #982 does what it is meant to do: help keep workers safe and comfortable. “Our Work and Safety product design activity relies heavily on user insights and human-centred design processes. Our chemical-resistant #982 is a perfect example of this collaboration process. We’re incredibly proud to supply a diverse range of safety styles that are fit for purpose,” says Adrian Blandford, Blundstone Global Work & Safety Range Manager. But even before any worker’s boot is zipped or laced up, the first step to ensuring a safe workplace is taken by the employer. Hazard assessments of every work environment are essential, and if it is determined workers may or will be exposed to chemical hazards, the employer must ensure the workers are provided with the most appropriate footwear protection.
CLICK FOR
MORE INFO. Or contact your Technical Safety Specialist
ASSESS | INFORM | EQUIP
9
CHEMICAL PROTECTION OUR SPECIALISTS
PPE
RESPIRATOR FILTERS DON’T LAST FOREVER SO WHY TAKE THE RISK? In the workplace, there are many airborne hazards which can enter via the respiratory system and pose a significant risk to worker’s safety and health. Some of these are potentially fatal, or lead to illness and disease longer term.
WGTP CASE STUDY
Occupational lung diseases are caused by exposure to hazardous dusts and or chemicals in the workplace. Contaminants include silica dust, concrete particulates, various fumes and vapours, pesticides, and fuels. Industries where there is a risk include manufacturing, construction, engineering, agriculture, transport, and storage.
WELDING FUME
You can identify the risks in your workplace by adopting the following process: • Inspect and monitor workplace • Talk with workers • Talk with supply chains and networks about the products that are used in your workplace • Review information from work, health and safety regulators, industry representatives, and safety professionals
MENTAL HEALTH MONTH
CLICK FOR
MORE INFO.
If your business uses respirators, you must have a stringent respirator management program to best ensure the safety of everyone in your workplace. This includes knowing which respirator filters are best suited to your workplace requirements. There are three types of filters, all of which have a variety of different models to suit different situations: 1. Particulate Filters: Protect ONLY against particles. For example, dust, fumes, smoke, mould, and bacteria. The Australia-New Zealand Standard (AS/ NZS 1716) classifies these filters into: P1: For use with mechanically generated particles. P2: For use with mechanically, thermally, or biologically generated particles, such as welding fumes, silica dust and SARS. P3: For use with highly toxic and/or highly concentrated particulates. Needs to be used with a full-face mask or head-covering respirator system. 2. Gas and Vapour Cartridge Filters: Protect ONLY against gases and vapours. Note, there are different types of filters in this category to suit different workplace situations 3. Combination Filters: Protect against BOTH particles and gases. Again, there are different types of filters in this category.
Or contact your Technical Safety Specialist
WHAT’S NEW
Gas & Vapor Filters 6051
Particulate Filters 6035
10
Safety Spotlight
Combination Filters 6099
Edition 3 / October 2021
The initial selection of any respirator and filter needs to be conducted by someone with a full knowledge of respiratory hazards in the workplace. The correct fitting and wearing of a respirator are essential. Remember, one size does not fit all. The respirator management plan must also include a regular examination of respirators and filters. A simple guideline to remember is Respirator filters do not last forever. “There are a variety of factors which determine how long a filter will last or when it should be changed.” says Barnabas Bucsi, 3M™ Channel Marketer. Particulate Filters can get clogged, which makes them harder for the users to breathe properly, and in what is known as ‘breakthrough’, the sorbents of Gas and Vapour Cartridge Filters can become saturated, which reduces their capacity to stop contaminants. Significantly, filters can also lose effectiveness when they are not stored correctly; keep them in places that are protected from contaminants, otherwise the filters may clog up or become saturated even when not being worn. There is no set life for
any filter. Any reduction in effectiveness is influenced by the filter’s workload. For example, a dusty job will block a filter more quickly than a relatively clean job. The decision to change a filter varies from user to user, application to application, and environment to environment. Companies may prescribe a filter change schedule, based on risk assessment for activity, and respiratory protections equipment used. It often depends on the user’s tolerance and sensitivity to changes in breathing loads. “As a general guide, a particulate filter should be replaced when the breathing load becomes too difficult for the user; when the filter has sustained any type of physical damage, such as being burnt or cut; or when the filter has become unhygienic from such actions as coughing or sneezing.” So, to breathe easy in the workplace, we must all be aware that we should not take breathing for granted.
ASSESS | INFORM | EQUIP
11
CHEMICAL PROTECTION PPE OUR SPECIALISTS
RESPONSE PLANNING & SPILLS KITS Accidents can happen. But what happens in your workplace when the accident involves spills of hazardous substances that can be harmful to people and/or the environment? Are you prepared?
WGTP CASE STUDY
As part of an emergency response plan, this preparation begins long before any spill may occur. Firstly, every business needs to have accurate and up-to-date records of all hazardous substances on site and when a new substance is introduced, staff need to be trained and updated accordingly. It may also require additional and appropriate spill response equipment.
WELDING FUME
Secondly, while businesses are to ensure these substances are transported and stored safely, every business needs to have an action plan in place should a spill occur. This includes risk assessments that identify any spill risks in the workplace and the placement of spill response equipment at appropriate locations. Thirdly, staff need to be trained and be fully aware of their responsibilities should a spill happen. In the case of a spill, a well-organised response includes: • Assessing the site:
MENTAL HEALTH MONTH
- Is the spill spreading/still leaking? Control the spill – If it’s safe to do so, switch off any leaking taps or valves, correct any containers which have been knocked over and try to stem the flow if possible. - What are the risks? - Should an alarm be sounded? - Who and what is needed to clean up the spill? • Contain the spill:
WHAT’S NEW
-S top the spill from spreading further and causing additional hazards or damage to the environment. This includes preventing contamination to drains, sewage systems, waterways, and land. • Clean the spill: - L arge or highly dangerous spills may necessitate help from external agencies. Smaller spills can be cleaned up by using spill kits.
12
Safety Spotlight
A spill kit is a collection of specifically designed equipment to be used in spill situations. Contents may include absorbents, waste disposal bags, Personal Protective Equipment (PPE) and other containment tools. Spill kits are typically housed in brightly coloured, easy to recognise bags or bins to eliminate any confusion when time is of the essence. There are three main types of spill kits: • General Purpose: - For non-hazardous, everyday liquid spills. • Oil and fuel (hydrocarbon): - For oil, grease, and other hydrocarbon-based liquids. • Hazchem (chemical): - For aggressive chemicals or unknown liquids.
“Spill kits are purpose built to suit different spill types and sizes. They range from handy grab bags which can fit in the cab of a truck or ute, all the way up to large wheelie bins which can be easily manoeuvred to the site of a spill. Each business should seek guidance from an appropriate industry professional to determine what kit is best suited to their needs and their workplace,” says Mike Carrigg of Spill Crew Australia. As with all tools and equipment, workers need to be familiar with spill kits and how they are used. Spill kits are an integral part of many worksites. Be prepared.
CLICK FOR
MORE INFO. Or contact your Technical Safety Specialist
Edition 3 / October 2021
// W HICH SAFETY GOGGLES
FOR WHICH ENVIRONMENT?
Splash hazards, dust, debris, improper use of tools, malfunctioning equipment, breaks in concentration, being in the wrong spot at the wrong time…There are many reasons why you may need safety goggles in your workplace. And there are many things you will need to know, starting with the well-worn adage about Personal Protective Equipment (PPE): One size does not fit all. Unfortunately, too many workers either do not wear correctly fitted safety goggles or are wearing the wrong type of protective eyewear for their job. As a starting point, you must research and understand your workplace; if it is subject to splash hazards, airborne dust, or flying debris, you should consider using safety goggles as a better option than safety glasses. Although safety glasses are designed to protect your eyes, they can have small gaps that may leave the wearer vulnerable; this includes wraparound glasses.
“Unlike safety glasses, safety goggles have tight form-fitting facial seals that provide thorough protection. They are appropriate for environments that are dusty, where various types of grinding occur, or where there are chemicals, including caustic vapours, for example workplaces such as assembly lines, mechanic shops, and laboratories,” says Rimma Shabanova of Bollé Safety.
There are several types of safety goggles. These include: • Direct Vent: With multiple perforations that enable fog-reducing airflow. These are used for impact protection, but are not suitable for protection from liquids, dust or caustic vapours. • Indirect Vent: With covered vents that increase air flow. Provide better protection from splash hazards and dust but shouldn’t be used when caustic vapours are present. • Non-vented: With complete seal, but no vents. Suitable against splash, dust, caustic vapours, and impact, and can come with an anti-fog coating or require anti-fog spray.
CLICK FOR
MORE INFO.
Or contact your Technical Safety Specialist
You might not win a fashion contest by wearing safety goggles, but if you use them properly, you will protect your eyes. As with all PPE, make sure your safety goggles specifically suit you and your workplace. ASSESS | INFORM | EQUIP
13
CHEMICAL PROTECTION PPE OUR SPECIALISTS
WGTP CASE STUDY WELDING FUME
MENTAL HEALTH MONTH
VISIONARY TECHNOLOGIES PROVIDING PROTECTION IN THE WORKPLACE We know how harsh and varied work environments can be in Australia. Because of this, our equipment - not to mention ourselves – Can cop some tough punishment, even with chemicals. As a result, our PPE needs to be resilient, right down to the smallest features. The lenses of many Australian safety goggles have coatings that are best suited to protect us and our goggles from Australia’s diverse work conditions, both indoors and outside. These coatings, which also increase the efficacy and longevity of the goggles, are important factors when you are considering what eyewear is most suitable to you and your work environment. uvex understands the harsh Australian conditions only too well and have developed a comprehensive range of scratch and fog resistant eyewear. Called uvex supravision, it provides more than superior coating technology, it also engenders a greater level of confidence to employers, eyewear will be worn. Lens coatings available on the market include: • uvex supravision sapphire scratch resistant on both sides. Offering excellent resistance to chemicals, whilst suitable for dusty and abrasive environments. • uvex supravision excellence anti-fog on the inside, with the outside offering scratch and chemical resistance. Suitable for strenuous activity in dusty and abrasive environments. • uvex supravision THS anti-fog on both sides. Suitable for constant movement between areas of different temperature and humidity. • uvex supravision extreme, extreme scratch resistant on the outside, and permanent anti-fog on the inside. Suitable for longlasting exposure to condensation and high concentrations of dirt. The visionary technology also extends to the shaping of the goggles. uvex megasonic features a revolutionary frameless ergonomic design that enables edge-to-edge, crystal clear clarity. The panoramic-style lens is about 20% larger field of vision than similar goggles, allowing the wearer to have close-to-natural vision and enabling them to keep the goggles on without impeding vision, particularly when moving about on the worksite. Other features include: • uvex supravision excellence coating • Extra wide headband to alleviate pressure • X-frame design to fit all facial shapes
WHAT’S NEW
• Ergonomic face piece for soft and comfortable custom fit • Fits comfortably over most prescription glasses Make sure you pick the right goggles for you and your workplace.
CLICK FOR
MORE INFO. Or contact your Technical Safety Specialist
14
Safety Spotlight
Edition 3 / October 2021
// PROTECT YOUR TEAM
& THE ENVIRONMENT WITH BIOREMEDIATION
Technology ensures nothing stays the same for too long in any industry. In the past, solvent parts washers have been effective and efficient in cleaning workshop parts, but now there is a cleaner, greener, and safer alternative offering lower operating costs. The CRC SmartWasher® uses Bioremediation Technology that eliminates nearly all the harmful waste typically produced from using a traditional solvent parts washer. Tested and proven on large oil spills worldwide, this technology has now been designed to suit workplace-sized systems. Bioremediation Technology is much simpler than it sounds with CRC SmartWasher®. A closed-loop system is created where naturally occurring microbes are introduced to the fluid via filter mats. As the system is being used, microbes do the dirty work cleaning the fluid, so it can be used time and time again. What’s more, there’s no expensive hazardous waste haulage, as contaminants are turned into non-toxic by-products, to less than 1/100th the waste volume of traditional solvent parts washers.
SIGNIFICANT WASTE STREAM REDUCTION
• Better for you, the workplace, and the environment • Addresses the most effective tier of the Hierarchy of Controls: Elimination
SOLVENT PARTS WASHER 1FILTER MAT
60L SOLVENT
CHANGED EVERY 6 WEEKS
CHANGED EVERY4 WEEKS
377kg Waste Annually*
3.3kg Waste Annually**
* Formula: L of Solvent x Density of solvent x Fluid
* Formula: Weight of OzzyMat® x 12 mats used per
replacement frequency = kg of waste annually
Benefits of CRC SmartWasher® Bioremediation Technology include:
year = kg of waste annually
Solvent Cleaners
• Reliance on PPE (Personal Protective Equipment) is significantly reduced, as there are no harsh chemicals used • The need for stringent chemical hazard operating guidelines is greatly reduced • The water-based fluid in the CRC SmartWasher® is constantly cleaned by microbes, thus promoting long-lasting performance while reducing the waste stream • No hazardous waste produced, eliminating expensive chemical haulage
CRC Smartwasher®
Performance
Solid performance with short term efficacy
Great performance with long terms efficacy
Safety
Significant workplace hazards
Virtually no hazards
Sustainability
Meets no modern sustainability targets
Sustainable closed loop system
Waste Reduction
Frequent hazardous waste haulage required
No hazardous waste haulage
CLICK FOR
MORE INFO. ASSESS | INFORM | EQUIP
15
CHEMICAL PROTECTION PPE
GLOVE DEXTERITY & VERSATILITY WHEN HANDLING CHEMICALS
OUR SPECIALISTS
Working with chemicals is dangerous, and it is the moral and legal obligation of every employer to ensure their workers are always protected in the best possible way, relative to the situation. Health hazards include burns, damage to the Central Nervous System (CNS), organ failure, sterility, blindness, cancer, and death. So, in all reality, how we best protect our workers can be a life-ordeath issue that demands constant and meticulous attention.
WGTP CASE STUDY
Where and when possible, we try to use the least dangerous chemicals and/or safer substitutes in the workplace. Also, we implement administrative and engineering controls as part of the five step Hierarchy of Controls (refer to page?). However, the reality is that workers will, in various circumstances, be exposed to hazardous chemicals. The last line of defence, and the last of the stages in the Hierarchy of Controls is the use of Personal Protective Equipment (PPE).
MaxiChem® Nitrile
MaxiChem® Latex
WELDING FUME
When it comes to the use of PPE chemical protection gloves, one of the challenges for manufacturers is: ‘How do we make the gloves comfortable and practical while still maintaining or improving stringently high levels of protection?’ ATG® provides a dynamic answer. Using a revolutionary technology platform, ATG® has introduced a new generation of chemical protection gloves, MaxiChem® with TRItech™, that are 30% thinner and 100% more comfortable, but still provide the dexterity and versatility the wearer needs to maintain safety high performance.
MENTAL HEALTH MONTH
“What makes this MaxiChem® glove unique, is TRItech™. Three composite layers of material, which enhances the mechanical performance of the glove as well as the comfort of the glove, that’s been tested in real-world situations,” says Paul McGregor of Mayo Hardware. “ATG® is proud to have developed this technology to protect workers appropriately, when handling a range of chemicals.” All MaxiChem® gloves are dermatologically accredited by the Skin Health Alliance.
CLICK FOR
WHAT’S NEW
MORE INFO. Or contact your Technical Safety Specialist
16
Safety Spotlight
1
2
3
1. P rotection layer – B arrier material against hazardous chemicals 2. P erformance layer – R einforcement liner for mechanical performance 3. C omfort layer – U ltra thin soft layer for better fit and grip inside the glove
Edition 3 / October 2021
16YRS
CRAIG POSTILL
TECHNICAL SAFETY SPECIALIST - SA/NT
Craig Postill is a proud husband and dad. He lives in Adelaide, where he runs a couple of horses with his 13-year-old daughter, on the family property. He loves his footy - AFL of course - follows the mighty Crows and he doesn’t mind a couch day watching the V8 Supercars or the Moto GP bikes. Craig has a deep knowledge and understanding when it comes to safety related matters across all industries, and he has a particularly strong expertise with mining and renewable wind farms, where his specialties include respiratory and working at heights. In all, he has spent sixteen years working in safety; initially he was employed with Protector Alsafe for 11 years, a sister company that merged with Blackwoods in 2016. “Over the years I’ve seen a lot of changes in safety, and how safety is approached,” says Craig. “People and businesses are more responsible nowadays. There’s more product choice, which can be overwhelming for businesses, but that’s where it’s great for me to step in and help provide the right solutions. It’s always enjoyable working across the broad customer base within the industry solving their different or unique problems.” Craig is well-known across many of Adelaide’s industrial areas, and he has gained a reputation for his easy-going yet get-the-job-done approach to his work.
YOU CAN CONTACT CRAIG ON +61 417 998 488
Craig.Postill@blackwoods.com.au
CHRIS BEATON
6YRS
TECHNICAL SAFETY SPECIALIST - VIC
As a loving family man, with 6-year-old triplets in tow, it’s not surprising why Chris Beaton is a committed, driven, and well-organised professional. Having competed for several years on the amateur tennis circuit, around the world and at the Australian Open, Chris transitioned to retail sports apparel, working for a boutique Italian brand, in the safety division. After 12 years, the need for ‘greater professional development’ ensued, with Chris subsequently joining Blackwoods in 2018, at the Scorsby operations. “When I first started, my son Ollie just loved looking through the Blackwoods Safety catalogue. He couldn’t get enough of it, so much so, I use to read it to him at night. It’s certainly one of the ways, how I built up my product knowledge that’s for sure!”, says Chris. As Technical Safety Specialist, he is known for his deep knowledge in apparel and footwear. “Even though I’m providing safety solutions across various industries, design trends, combined with functionality, is also important to workers on and off the job site. Stretch fabrics and lightweight technologies are areas I’m also well-versed in.” Chris thoroughly enjoys the relationships he has with customers. “Safety is so critical to our day to day lives, as we have seen in recent times. So, I find it rewarding working with customers, to help them find the right safety solution for their workers and workplace.”
YOU CAN CONTACT CHRIS ON +61 437 998 112
Chris.Beaton@blackwoods.com.au
ASSESS | INFORM | EQUIP
17
CHEMICAL PROTECTION PPE OUR SPECIALISTS
WGTP CASE STUDY WELDING FUMES
SILICA DUST SUPPRESSION RIGHT AT THE COAL FACE
MENTAL HEALTH MONTH
With Respirable Crystalline Silica (RCS or Silica dust) a significant safety issue for many in the construction industry, and a leading cause of lung cancer and other illnesses, it’s not surprising an Australian syndicate of safetyorientated businesses are leading the way with an innovative home-grown solution, including Blackwoods.
WHAT’S NEW
It’s November 2020, and construction is under way at the West Gate Tunnel Project (WGTP). As with all Tier 1 construction companies, health and safety is a core value and WGTP (CPB Contractors) were looking at an effective engineering solution to control Silica dust exposure whilst undertaking jackhammering activities.
18
Safety Spotlight
“Civil construction requires significant concrete structures to create the infrastructure needed for road and tunnel construction. Jackhammering is a large component of the work, particularly during pile break back activities. Workers’ health and well-being is our top responsibility, and new innovative solutions need to be found to keep Silica exposure levels below the Occupational Exposure Standard,” said Richard Cain, Senior Health & Safety Advisor at the West Gate Tunnel Project. “Taking into consideration the lessons from the stone masonry industry, we were keen to find industry changing solutions
Edition 3 / October 2021
to combat the risk to health of construction workers. We’ve worked with Blackwoods for many years and have assisted in solving many of the unique problems our projects typically present.”
to ensuring an effective and practical solution.” said Matthew Dicker, Health & Safety Manager, West Gate Tunnel Project. CPB Contractors has now mandated that controls must be in place that meet or exceed the benefits of the Dixon system across its Victorian sites.
Following the launch of Safety Spotlight late in 2020, WGTP looked to Blackwoods to improve respiratory protection on site. With PAPR systems making their way to workers, a desire to find an ‘Above The Line Control’ and engineer Silica dust out of the process entirely (and not just rely on PPE), was now on the table. Once again Blackwoods was engaged to help solve the problem. “We knew dust suppression systems were being trialled in the USA but with nothing available here in Australia. WGTP shared photos and links on the system and asked the question ‘can we make it here?’ So, we engaged our supply partner, Dixon, and they jumped to the idea in a bid to develop a retro-fit system specific for jackhammers,” said Terry Meachen, Major Projects Manager at Blackwoods. “WGTP were very keen on a locally developed and manufactured system to promote local content on the project. Currently an additional person must be available to spray water on the job to keep the dust down.”
“We believe this will spark a number of initiatives to suppress Silica dust across a variety of different applications. We thank Terry, Blackwoods and Dixon for all their efforts in working to reduce the risk to our workers.” Richard said.
With Dixon (a leading innovator in the hose coupling industry) now onboard, trials began in March of 2021 and continued through to June.
Blackwoods would like to congratulate West Gate Tunnel Project and Dixon for their commitment to such an important trial. We are proud of our involvement as we strive to make all workers safer in their workplaces.
“Many configurations and spray nozzles with varied spray patterns and flow rates were used and tested on site at WGTP. Instead of just a simple spot test here and there, we trialled it day and night in different weather conditions and over long periods with a goal to be below the Australian exposure standard of 0.05mg/m3.” After much trial and error, one flow nozzle proved successful, keeping the concentration of RCS below the Australian occupational exposure standard of 0.05mg/m3 over eight hour work shifts during the month long final trial. “There was a tremendous amount of effort applied to getting this right amongst the parties involved. It took a bit of time, but we eventually got there. In fact, we achieved consistent average readings below 0.05mg/m3 over the month. This was a pleasing and exciting discovery for all. The hard work and perseverance of all those involved needs to be recognised. The continued collaboration with our contractors, HSRs, and Blackwoods was integral
For further information email construction.projects@blackwoods.com.au
ASSESS | INFORM | EQUIP
19
CHEMICAL PROTECTION PPE OUR SPECIALISTS
WGTP CASE STUDY WELDING FUME
MENTAL HEALTH MONTH WHAT’S NEW
MANAGING THE RISKS OF WELDING FUME Take a look at this list: cancer (lung, larynx and urinary tract), bronchitis, pneumonia, asthma, emphysema, skin disease, and damage to the central nervous system and kidneys. These are some of the health issues that can arise if someone is exposed to welding fume.
and welding, gas & abrasives teams for industry best practice guidance. Through onsite assessments our team of experts enable customers to conduct hygiene assessments that provide them with peace of mind, or an applicable and practical fit for purpose solution.
Whilst welding is a task performed across many industries and can be inadvertently overlooked, the reality and gravity of these health issues was underlined in 2017 when the International Agency for Research on Cancer (IARC), re-classified all welding fume generated from welding as ‘Carcinogenic to humans.’ Put simply, welding can be a hazardous occupation if you are not suitably protected, and appropriate safety practices are not adhered to. An inherent challenge with the above is that some of these health issues may not arise for many, many years.
When providing onsite assessments, the five-tier Hierarchy of Controls methodology is applied:
In Australia, there are exposure standards to contaminants. The standard for general welding fume, which is measured inside the welder’s helmet when worn (‘breathing zone’), must not exceed 5mg/m3 using a Time Weighted Average (TWA) of eight hours per day over a five-day working week; this excludes other fume types such as chromium and copper which are lower. “The understanding of safe practices and obligations associated with welding fume continues to improve in Australia. Over the last 24 months alone, we’ve seen a significant lift in enquiries from safety advisors, production managers, workshop leaders and the like on Welding PAPR (Powered Air Purifying Respirators), welding fume controlling systems as well as the associated PPE,” says Dino Paris, Blackwoods Technical Specialist Team Leader, Welding, Gas & Abrasives. In support of these enquiries, many customers enlist the involvement of the combined Blackwoods technical safety
20
Safety Spotlight
1. E limination: Remove the hazard (fume). 2. Substitution: Replace the hazard. 3. E ngineering controls: Isolate the hazard by maintaining designating (welding) areas and minimise or remove fume through controls. 4. A dministrative: Change the process, consider shift rotations and position workers to minimise or remove exposure to fume. 5. P ersonal Protective Equipment (PPE): Use appropriate protective clothing and respiratory equipment. The controls are listed in order from the most to the least effective. In almost all situations, a combination of these controls is needed to best protect welders. The Blackwoods team of technical specialists are available to assist you in undertaking a hygiene assessment for peace of mind, or to assist in identifying a tailored solution to keep welders safe.
CLICK FOR
MORE INFO. Or contact your Welding Specialist
Edition 3 / October 2021
// MINIMISE WORKER EXPOSURE
WITH ENGINEERED CONTROLS Welding fume is comprised of solid particulate and gases and are hazardous. In fact, it can lead to serious ailments, and/or death. Every employer needs to be thoroughly aware of the hazard and act accordingly. That means every worker who may be exposed to welding fume in the workplace needs to take appropriate safety measures. As part of safe practice, workers must wear the appropriate Personal Protective Equipment (PPE) which includes welding helmets, gloves, jackets, caps, and footwear.
says Charles Elbayeh, National Product Manager – Equipment, Lincoln Electric Company (Australia) Pty Ltd. Materials being welded, consumables used and even the welding process are key factors to be considered when selecting the right system. For the best result, consult a Blackwoods welding technical specialist to assess your workplace conditions.
Also, it is important to understand the importance of Weld Fume Management Controls, which include optimisation, isolation, ventilation/extraction, and safe work practices. These controls can protect workers, the workshop and minimise risks to the employer at a time when welding has become an increasing focus for Workplace Safety authorities. Lincoln Electric offers a range of extraction options that can isolate workers from hazardous fumes. These include portable and stationary fume extractors, extraction arms with centralised collectors, and fume extraction welding guns that can help capture and remove fumes at their source, well before they reach a welder’s breathing zone. “It is often said that welding fume extraction is a nonproductive investment. That is not true; it does have a positive effect on the productivity and comfort of the welder. When you create a safe workplace, you lift the image of the company both internally and externally. But more importantly, this results in more motivated employees, better efficiency and a higher quality of the welding job,”
0336 6127
0365 7354
CLICK FOR
MORE INFO. Or contact your Welding Specialist
ASSESS | INFORM | EQUIP
21
CHEMICAL PROTECTION PPE OUR SPECIALISTS
WGTP CASE STUDY WELDING FUME
FOR WELDING FUME EXPOSURE There are more than 80 different types of welding and associated processes. That means there is a lot for any welder, from a trainee to an expert to take in. Unfortunately, during any of these 80-plus activities, welders can also take in toxic fumes if unprotected. With welding fume classified as ‘Carcinogenic to humans’ by the IARC (International Agency for Research on Cancer), the welding industry continues to undergo significant safety changes. At the core of any change is the knowledge that all welding processes are subject to risk assessment, and in the case of welding fume, the hierarchy of controls must be applied. In reference to PPE, every employer should consider the use of auto-darkening welding helmets that have integrated Powered Air Purifying Respirators (PAPR). Welding helmets with PAPR are mandatory in many Australian businesses. Statistically they tell a story that cannot be overlooked: They have a Required Minimum Protection Factor (RMPF) of 50, which means they supply breathing air which is at least 50 times cleaner than the air the welder would be breathing if unprotected. By comparison, disposable half-face style respirators have a RMPF of 10 if properly fitted and worn. Powered Air Purifying Respirators are versatile. They allow the welder unrestricted movement, offer clear vision, comfort, eye and face protection, and of course, respiratory protection. They are valuable in a variety of environments where welders may work with such materials as aluminium, stainless steel, galvanised steel and applications including MMA, GMAW, FCAW, SAW and TIG.
G5-01 0040 7902
6528 GP2 0009 9675
“In relation to the hierarchy of controls, PPE is often referred to as the last resort. When it comes to welding, suitable PPE must always be worn. Even if a welder is operating within the workplace exposure standard for welding fume, they can still inhale up to 11 grams of fume every year. 11 grams of a substance with a direct link between human exposure and the development of cancer,” says David Chippendale, Director of Marketing and Sales AWS.
“Exposure limits are just the beginning and workplaces should look to roll out a combination of controls to give welders the best possible protection. Using a PAPR in the work area whenever there is a risk of significant welding fume exposure can provide highly effective protection.”
WHAT’S NEW
MENTAL HEALTH MONTH
RESPIRATORY PROTECTION
22
Safety Spotlight
7528 P2 0190 0761
CLICK FOR
MORE INFO. Or contact your Welding Specialist
Edition 3 / October 2021
OUR TEAM OF WELDING, GAS & ABRASIVES SPECIALISTS
PETER AGNOS HEAD OF TECHNICAL +61 417 819 584
Peter.Agnos@blackwoods.com.au
DINO PARIS
SPECIALIST - WELDING, GAS & ABRASIVES - SA/NT
13YRS WELDING, GAS & ABRASIVES
Dino.Paris@blackwoods.com.au
+61 407 621 491
ZAC GRAHAM
SPECIALIST - WELDING, GAS & ABRASIVES - QLD Zac.Graham@blackwoods.com.au
+61 447 993 810
DINO PARIS
SPECIALIST - WELDING, GAS & ABRASIVES - NSW/ACT
EXPERIENCE
12YRS WELDING, GAS & ABRASIVES EXPERIENCE
13YRS WELDING, GAS & ABRASIVES
Dino.Paris@blackwoods.com.au
+61 407 621 491
MATT LEWIS
SPECIALIST - WELDING, GAS & ABRASIVES - VIC/TAS
EXPERIENCE
26YRS WELDING, GAS & ABRASIVES
+61 447 542 324
Matt.Lewis@blackwoods.com.au
PAUL CARTMELL
SPECIALIST - WELDING, GAS & ABRASIVES - METRO/NTH WA
EXPERIENCE
11YRS WELDING, GAS & ABRASIVES
Paul.Cartmell@blackwoods.com.au
+61 428 865 249
GEOFF CHARLTON
SPECIALIST - WELDING, GAS & ABRASIVES - METRO/STH WA
EXPERIENCE
19YRS WELDING, GAS & ABRASIVES
+61 438 048 392
Geoff.Charlton@blackwoods.com.au
EXPERIENCE
HEARING PROTECTION SIMPLIFIED Loud noises and our hearing do not make for good companions. Our hearing can be easily damaged; in the workplace this means we must take every precaution to ensure we are not exposed to excessive noise without using suitable protection. Earplugs, most of which are made from foam, help protect our hearing from loud noises that can cause noise-induced hearing loss. They fit into the ear canal and are designed to limit noise exposure to below 85 dBA during an average eight-hour work shift. Sounds above 85 dBA can damage your hearing quicker than sounds below this level. In a welcome advancement, the 3M™ E-A-R™ Flexible Fit Earplug is now available. It is the first fully washable foam earplug. With patented technology, it has a tip of soft conforming foam that enables a snug, comfortable fit without the need for rolling it into shape with fingers, and this means it can remain cleaner than conventional earplugs. Also, its foam-covered tip allows the user to insert the earplug easily with either one or two hands; this is a great advantage in situations when the user may be inhibited by gloves or dirty hands. When fitting the device via the one handed insertion method, the noise that the user is exposed to can be reduced (attenuated) by 16 decibels, while the two-handed insertion can reduce noise by 20 decibels.
CLICK FOR
MORE INFO. Or contact your Technical Safety Specialist
The 3M™ E-A-R™ Flexible Fit earplug is available with and without cords. ASSESS | INFORM | EQUIP
23
CHEMICAL PROTECTION
MENTAL HEALTH
OUR SPECIALISTS
PPE
A REAL CONVERSATION STARTER Imagine this situation. You have an accident, perhaps a fall at work, or maybe a tackle that went pear-shaped on the footy field. Your leg hurts, and everyone around you sees the pain that you are feeling. You are taken to hospital. An X-ray reveals you have fractured your tibia. ‘You’ll be ok,’ says a doctor. ‘You’ll be in plaster for a while with crutches, then we’ll get you back on your feet.’
Despite all the progress that has been made in breaking down barriers and stigmas attached to mental health, enormous challenges remain. Many blue-collar workplaces are still strongly influenced by masculine cultures which prevent or hamper true emotions and feelings being shown. ‘Come on mate, man-up. Don’t be weak.’ The damage such a culture can cause can be irreparable.
If only all conditions were as easy to identify and fix. But… and it is an all too tragic ‘but’…the reality is far removed from simply holding some film up to a light and making a diagnosis.
Brisbane carpenters Ed Ross and Dan Allen are helping to change the culture. In 2018, they established the social work wear company, TradeMutt, following the suicide of one of Dan’s close mates in 2015. Since then, they’ve also established This Is A Conversation Starter Foundation (TIACS) which supports people suffering from mental health issues. Now, the two organisations are working together to start conversations about mental health on a daily basis in a bright and fun way, but TIACS also follows up those conversations by providing free access to mental health support for the tradie community which is funded through TradeMutt’s workwear sales.
WELDING FUME
WGTP CASE STUDY
In Australia, about 3,000 people commit suicide a year. That’s about 8 per day. There is no way to look at the statistics without a sense of utter alarm. Taking one’s own life is the number one cause of death among Australian men under 44 years of age, and it is the second leading killer of Australian men aged between 45 to 54. Sadly, tradies, particularly those working in the construction industry, have one of the highest male suicide rates in Australia. Every second day, an Aussie tradie takes his life.
4 STEPS TO PREVENTING PSYCHOLOGICAL INJURY AT WORK
MENTAL HEALTH MONTH
Safe Work Australia has developed a step-by-step process for managing psychological injury, intervening early and for taking action to prevent your workers becoming ill or sustaining a psychological injury. Psychological hazards are anything that increases the risk of work related stress including: • High or low job demands
STEP 1: IDENTIFY Identify psychological hazards and risks by: • Talking and listening to your workers
• Taking note of how your workers interact
• Inspecting your workplace
• Using a survey tool to gather information from staff
• Reviewing reports and records
STEP 2: ASSESS Consider what could happen if workers are exposed to the identified hazards and risks. Many are well known but some may need to be identified through a formal assessment.
• Low job control • Poor support • Poor workplace relationships • Low role clarity • Poor change management
STEP 3: CONTROL Where possible, eliminate the risk. This is always the safest option, but if it isn’t possible, minimise the risk as much as possible through planning and prevention
WHAT’S NEW
• Low reward and recognition • Poor organisational justice • Poor environment conditions • Remote or isloated work • Violent or traumatic events
24
Safety Spotlight
STEP 4: REVIEW Maintain, monitor and review control measures, when necessary. It is important to regularly review control measures to ensure they remain effective.
Edition 3 / October 2021
“It’s been amazing to see so many large companies jumping on board and decking out their teams in conversations starting workwear. We get reports every day from these businesses about the positive impact a simple shirt has had among their staff and the overnight shift in culture when wearing them. There has never been a more important time for the industry to come together and not only bring awareness to the topic of mental health, but actively having those conversations among staff is where the real magic happens,” says Dan Allen.
Blackwoods is a staunch supporter of this cause, and offers TradeMutt products, as well as the Workhorse range from Beyond Blue. “We encourage businesses, from employers to employees, to join us by purchasing and wearing the products to help spread the word about a distressing problem that we must work together to solve,” says Andrew Dyke Blackwoods General Manger, Eastern Region. “In conjunction with this, please, if you are struggling with mental health worries, or you recognise someone who is or may be suffering, please reach out to the many organisations that are doing vital work in this area.”
If you, or someone you know, needs help, visit: Lifeline: www.lifeline.org.au or 13 11 14 Beyond Blue: www.beyondblue.org.au or 1300 224 636 Black Dog Institute: www.blackdoginstitute.org.au MensLine Australia: www.mensline.org.au Gotcha4Life: www.gotcha4life.org Mates in Construction: www.mates.org.au This is a Conversation Starter: www.tiacs.org or 0488 846 988
ASSESS | INFORM | EQUIP
25
CHEMICAL PROTECTION MENTAL HEALTH MONTH
WELDING FUME
WGTP CASE STUDY
OUR SPECIALISTS
PPE
THE IMPORTANCE OF THE RIGHT FIT
K27115 Wheat
K27145 Black
WHAT’S NEW
K27120 Cedar
26
Safety Spotlight
Edition 3 / October 2021
The great artist and thinker Leonardo Da Vinci was quoted as saying, ‘The human foot is a masterpiece of engineering and a work of art.’ We could also add to that by suggesting the foot is the body’s ultimate glutton for punishment. Yes, it cops a lot, particularly across many Australian industrial settings. For most of us, our feet are the foundations of our every single day. But they are a bit like car tyres. Most of us just zoom around on them, don’t check them all that much, and we only have our attention drawn to them when they aren’t performing as well as they should be, or when they become sore or painful. Feet that aren’t in great shape can cause many issues in other parts of the body. Our legs, back, and numerous joints can all suffer if our foundations aren’t sound. So, obviously we need to look after our feet, and at the very least, pay more attention to them. And what is instrumental to the overall wellbeing of our masterpieces of engineering? Footwear. Do you work in retail, warehousing, logistics, transport, construction, manufacturing, mining, oil and gas, farming… the list goes on. Whether you move a lot, or are parked for long periods at a desk, it is essential that you have footwear that is fit-for-purpose; it has to adhere to occupational health and safety and of course, be comfortable. These requirements present challenges for footwear specialists who need to recommend and provide the most suitable footwear for workers in a vast array of different environments and jobs. The statistics underline the significance of these challenges. According to Safe Work Australia, 386 workers died between 2003-2015 as a result of slips, trips, or falls. Slips have most relevance to footwear because some happen due to the use of inappropriate or ineffective shoes or boots. King Gee has risen to these challenges with its Quantum range, which offers a variety of hybrid footwear that is suitable across an array of industries and occupations. “The importance of Hybrid technology is that we take into account load on feet and overall impact to end user. We know from our research that weight on feet takes 5 times more energy than carrying the same amount of weight on your back. Workcover (2010) reports shows that lower limb injuries are prevalent in occupations that involve prolonged walking,” says Pat Zampaglione, Group Merchandise Manager, Workwear Group.
Quantum Hybrid technology is centred around the understanding that traditional safety footwear is heavier in weight and thereby requires additional oxygen intake and heart rate response. Quantum is up to 200 grams lighter than a traditional safety boot, saving 1.2% energy burn / aerobic capacity for each 100gram weight relief. “Our Hybrid range is specifically designed to combat the 59% of work-related injuries that are caused by incorrect fitting or incorrect footwear consisting of 36% body stressing caused by high step count and fatigue, 23% due to falls, trips and slips as per Safe Work Australia 2020 report.” Quantum is endorsed by the Australian Podiatry Association (APODA), the nation’s largest and oldest peak body that represents podiatry and footcare promotion. Podiatrists are concerned with the prevention, diagnosis, treatment, and rehabilitation of conditions of the feet and lower limbs. Pat went on to say, “To achieve APODA endorsement our safety footwear must pass the Product Assessment process and fulfil a detailed list of stringent requirements. A minimum panel of six (6) independently practising AHPRA registered podiatrists (four year trained, in clinical practice for a minimum of 5 years and currently in clinical practice) are tasked with assessing and approving our safety footwear for endorsement. Criteria for endorsement includes, and not limited to, the product positive for foot health, meeting the stated claims of industry testing and certification.” “Through APODA we educate end users on the risk of prolonged and frequent standing, without some relief by walking, causes blood to pool in the legs and feet. When this happens over longer periods, it can result in lower limb inflammation.” In their countless responsibilities, employers can overlook the importance of ensuring their employees have safe, high quality, comfortable, and correct fitting footwear that is fit-for occupational purpose. However, such oversights can prove harmful, if not dangerous, and costly. In simple terms, every foot is precious. And like every work of art, it needs to be looked after if its value is to both be appreciated and appreciate.
“Safety footwear in the main is designed with occupational safety at the expense of functionality and design. Our association with APODA, in conjunction with KingGee, the only safety footwear accredited brand, are committed to the advancement of podiatry to improve foot health in the community.”
ASSESS | INFORM | EQUIP
27
CHEMICAL PROTECTION PPE OUR SPECIALISTS
FLEXIBLE FIT & FULLY WASHABLE EAR PROTECTION
GREATER GLOVE DEXTERITY & VERSATILITY WHEN HANDLING CHEMICALS
NOT ALL EYEWEAR COATINGS ARE CREATED EQUAL
SELECTING THE RIGHT COVERALL WHEN WORKING WITH CHEMICALS
In a welcome technological advancement, 3M has developed the first fully washable foam earplug that does not need rolling into shape. Able to be inserted by either one or two hands, it can reduce the noise that a user hears by up to 20 decibels.
When it comes to the use of PPE chemical protection gloves, one of the challenges for manufacturers is: ‘How do we make the gloves comfortable and practical while still maintaining or improving stringently high levels of protection?’ MaxiChem may be the answer you are looking for.
Safety eyewear is one of the most common pieces of Personal Protective Equipment (PPE). But how much of the eyewear meets safety standards. Do you know what you are looking for?
From the tops of our heads to the soles of our feet, every single millimetre of us can be damaged beyond repair if we are not properly protected against harmful chemicals and substances. Do you know what coveralls are applicable to your work?
WELDING FUME
WGTP CASE STUDY
WHAT’S NEW?
Blackwoods and PROSAFE would like to extend our sincere appreciation to everyone that has supported our contribution to The Fred Hollows Indigenous Australian Program since 2008. In FY21, with your support, we have reached a donation total of $500,000. Thanks to your support of purchasing PROSAFE eyewear products, our total donation amount has exceeded 2.5 million dollars.
MENTAL HEALTH MONTH
With your help, many more Indigenous Australians now have a brighter, clearer future. Our vision is to support The Fred Hollows Foundation’s Indigenous Australian Program sustainably, so we can close the gap on eye health and Aboriginal and Torres Strait Islander people can access their right to good health and self-determination. We have established that from FY22 and onwards, 10% of all profits generated from PROSAFE eyewear products and accessories and Armadillo faceshields sold in Australia will continue to be donated. Thank you so much for being a great visionary.
WHAT’S NEW
Blackwoods and PROSAFE.
10% of profits donated from PROSAFE eye protection, accessories, and Armadillo faceshields sold through Blackwoods in Australia.
28
Safety Spotlight
Edition 3 / October 2021
CAN’T GET YOUR HANDS ON A PAIR OF NITRILE GLOVES?
NOW YOU CAN If you have a child studying economics, the international nitrile glove industry makes a great case study for ‘Supply and Demand 101’.
Let’s start with some basic background. Nitrile is a synthetic rubber whose durability and resistance to chemicals and punctures, makes it a great material for disposable gloves that are used in a large variety of businesses including postal work, handling of light chemicals, provision of food, and many different types of face-to-face occupations. However, in recent times most attention has been drawn to the international medical industry which has required hundreds of billions of nitrile gloves to be manufactured, distributed, and used annually.
Orange Nitrile Disposable Gloves
Now, let’s throw in the biggest international drama in recent memory: The Covid 19 crisis. By March 2020, when Covid was beginning to take hold across the world, the demand for nitrile gloves, not surprisingly, skyrocketed. This demand placed immediate stress on the supply chain where manufacturers found it impossible to increase capacity to the levels required; in part, their predicament was caused by increasingly scarce resources. Malaysia, which produces as much as 75% of the world’s medical gloves, was hit hard. Among its challenges was an outbreak of Covid among workers at one of the country’s largest glove manufacturers, which forced the temporary closure of some factories. This led to a critical shortage of nitrile gloves across the globe, which in turn, forced inevitable price rises for distributors and end-users, and headaches for all concerned. “The Glove Company have experienced significantly heightened levels of demand for our high-performance nitrile gloves throughout the pandemic. We have worked hard over the last 12 months to expand and further secure our supply chain to meet demand now and into the future.” Says Grant Staples CEO of The Glove Company Global Group. With vaccination programs now in full swing in many countries, the demand for nitrile gloves remains extremely high. But the good news is, supply is now normalising, and if we keep our nitrile-covered fingers crossed, the worst of the predicament has passed.
CLICK FOR
MORE INFO. Or contact your Technical Safety Specialist
ASSESS | INFORM | EQUIP
29
OUR INTEGRATED APPROACH TO SAFETY For over 140 years, we’ve been Australia’s leading industrial and safety equipment provider. You’ll find us across the country on construction sites, mine sites, and on desert roads, making sure workers are protected when it matters most. We work with customers to understand the specific hazards they face. Drawing on the knowledge of our technical team, we share the expertise needed to review, test and manage safe work practices. Where stock is critical and time is limited, we can provide streamlined solutions using smart technology to help you better manage inventory, reduce cost, free-up capital and improve productivity.
When managing safety on worksites, knowledge is the key to prevention. Our goal is to stay abreast of the latest safety standards, recommendations and technology so we can keep our customers informed. Our Technical Safety Specialists are experienced in a wide range of industries, from mining to construction. They offer a wealth of hands-on practical knowledge and a passion for helping customers stay informed and protected. Our global sourcing expertise and capability coupled with long-standing relationships with market leading manufacturers throughout the world ensures our customers are provided with any best-practice developments and innovations in the safety space. With fit-for-purpose product selection guidance, sourcing, delivery and post purchase support in line with applicable standards, we have everything you need to get the job done safely, and if we don’t have it, we can get it.
But our approach goes far beyond simply supplying safety products. We invest time and expertise in our customers and share our broad depth of knowledge, so they are equipped to ensure that every employee, contractor and visitor returns home healthy and injury free. It’s what we refer to as our assess, inform, equip model. At each stage of the process, we collaborate with clients to ensure they get the right product, technical knowledge, and training, at the right time.
Our holistic approach to safety is what sets us apart and it’s something we’re incredibly proud of. Because when our customers can do their job safely and confidently, then we know we’ve done ours. Together we help more people build a better AUSTRALIA. 30
Safety Spotlight
Edition 3 / October 2021
MEET OUR TECHNICAL SAFETY SPECIALISTS
JON MARTIN
TECHNICAL SAFETY SPECIALIST - WA
24YRS
Jon.Martin@blackwoods.com.au
+61 438 439 155
GEORGIE ROSE
5YRS
TECHNICAL SAFETY SPECIALIST - NTH WA
Our team of Technical Safety Specialists are experienced in a wide range of industries and invest time with customers to understand the specific hazards they face.
Georgie.Rose@blackwoods.com.au
+61 417 947 834
MICHAEL SIMPER
Michael Simper@blackwoods.com.au
+61 429 347 245
They share knowledge so that customers are equipped to ensure that every employee, contractor and visitor returns home healthy and injury free. The Blackwoods technical safety team help customers get the right product, technical knowledge and training, at the right time.
Together we help more people build a better AUSTRALIA.
8YRS
TECHNICAL SAFETY SPECIALIST - STH WA
CRAIG POSTILL
TECHNICAL SAFETY SPECIALIST - SA/NT
16YRS
Craig.Postill@blackwoods.com.au
+61 417 998 488
DEAN ANDERSON
12YRS
TECHNICAL SAFETY SPECIALIST - QLD Dean.Anderson@blackwoods.com.au
+61 407 728 860
SIMON FOSTER
13YRS
TECHNICAL SAFETY SPECIALIST - QLD +61 418 259 239
Simon.Foster@blackwoods.com.au
MARIA FOX
24YRS
TECHNICAL SAFETY SPECIALIST - QLD +61 418 689 923
Maria.Fox@blackwoods.com.au
BRENDAN RYAN
AR E Y +
140USTRALIAN A
S
TECHNICAL SAFETY SPECIALIST - NTH NSW Brendan.Ryan@blackwoods.com.au
+61 417 231 550
LESTER DAVIES
TECHNICAL SAFETY SPECIALIST - NSW +61 418 265 269
BUSINESS DEVELOPMENT MANAGER APPAREL & FOOTWEAR - NSW +61 407 934 112
19YRS
Karen.McNamara@blackwoods.com.au
JANELLE COCCIA
TECHNICAL SAFETY SPECIALIST - SOUTH NSW
25YRS
Janelle.Coccia@blackwoods.com.au
DREW DAUNCEY
TECHNICAL SAFETY SPECIALIST - VIC/TAS +61 408 624 653
30YRS
Lester.Davies@blackwoods.com.au
KAREN MCNAMARA
+61 459 805 179
34YRS
23YRS
Drew.Dauncey@blackwoods.com.au
CHRIS BEATON
6YRS
TECHNICAL SAFETY SPECIALIST - VIC +61 437 998 112
Chris.Beaton@blackwoods.com.au
PETER AGNOS HEAD OF TECHNICAL - NATIONAL +61 417 819 584
Peter.Agnos@blackwoods.com.au
ASSESS | INFORM | EQUIP
31
ASSESS
EQUIP
We work with customers to understand the specific hazards they face. Drawing on the knowledge of our technical team, we share the expertise needed to review, test and manage safe work practices.
Our global sourcing expertise and capability coupled with long-standing relationships with market leading manufacturers throughout the world ensures our customers are provided with any best-practice developments and innovations in the safety space.
Where stock is critical and time is limited, we can provide streamlined solutions using smart technology to help you better manage inventory, reduce cost, free-up capital and improve productivity.
INFORM When managing safety on worksites, knowledge is the key to prevention. Our goal is to stay abreast of the latest safety standards, recommendations and technology so we can keep our customers informed. Our Technical Safety Specialists are experience in a wide range of industries, from mining to construction. They offer a wealth of hands-on practical knowledge and a passion for helping customers stay informed and protected.
With fit-for-purpose product selection guidance, sourcing, delivery and post purchase support in line with applicable standards, we have everything you need to get the job done safely, and if we don’t have it, we can get it. Our holistic approach to safety is what sets us apart from other suppliers and it’s something we’re incredibly proud of. Because when our customers can do their job safely and confidently, then we know we’ve done ours. Together we’re helping build a better Australia.
13 73 23
32
Safety Spotlight
blackwoods.com.au
Edition 3 / October 2021