Armcor Air Solutions - Buyers Guide

Armcor Air Solutions™

Our Mission

Armcor Air Solutions™ is an innovative organisation committed to the development, manufacture and supply of high quality and energy efficient products that fulfil the needs of the Mechanical Services Industry.

Our Vision

As an innovative organisation we strive to provide valuable, reliable and proven advice combined with a comprehensive specialist product range suited to our customers’ requirements.

Statement of Values

At Armcor Air Solutions™ we are committed to:

• High standards of loyalty, integrity and honesty

• Treat all customers with respect and provide them with the highest level of product knowledge

• Provide a specialist range of products that will suit the industry

• Ensuring a high standard of manufacturing and quality products

• Providing safe and healthy work practises

• Research and Development of products that meet and exceed current environmental standards

• Responsibly care for all our employees and their families

• Suppor t and encourage all employees to acquire new industry based skills and knowledge.

Fresh Air Indoors greener airconditioning solutions

Company Profile

Armcor Air Solutions™ is an established family business dedicated to the design and manufacture of specialised HVAC energy efficient products. We have over 30 years experience and have manufactured a range of fresh air HVAC systems and sheetmetal components to service the airconditioning industry.

Armcor Air Solutions™ maintains a commitment to provide a high level of products and systems that are effective, innovative and practical. A complete after-sales backup service continues as a priority.

While developing and supplying a premier range of products, Armcor Air Solutions™ strives to continually improve and update its product range. We welcome every opportunity to assist customers in appreciating the quality features and benefits available in our products.

Specialised Sheetmetal

Xchange Energy Recovery™

Xchange Energy Recovery™ offers:

• Low Cost Solution

• Improves Indoor Air Quality

• Reduces Airconditioning Load

• Exceeds AS1668 Part 2 and BCA Section J Requirements

• Earns Green Star Credit Points

Xchange Technology

Every building needs a constant supply of fresh outdoor air to keep the inhabitants healthy and comfortable. Outdoor air intake is usually too hot in summer and too cold in winter, causing added load on the airconditioning system and increasing the operating expenses.

Xchange Energy Recovery™ technology uses the heat of the stale indoor air to be expelled, to either heat or cool the incoming fresh air, to a temperature closer to the existing indoor air. This process dramatically reduces the load on the airconditioning system and the operating costs.

Xchange Energy Recovery™ systems are both innovative and practical solutions to bring fresh outdoor air into the work environment, while exhausting stale humid air. During summer the Xchange module dehumidifies and pre-cools the hot outdoor fresh air, saving up to 70% of the capacity required to cool this fresh air load.

To increase the fresh air intake into a building, it is standard practise to increase the capacity of the airconditioning equipment, consequently increasing the capital outlay and running costs.

Now with the Xchange Energy Recovery™ you can dramatically increase the fresh air without the increased capital and operational costs. This cost effective initiative enables the purchaser to earn valuable Green Star Points through the use of Armcor Air Solutions™ products.

Armcor can manufacture systems to suit your design and space requirements, to improve air quality and reduce energy consumption

Transfer Media available

1. Sensible Heat Transfer Media

The sensible heat exchanger is made of aluminium especially designed for air to air heat recovery and is used in many applications including swimming pools, toilet exhausts, condensation control and corrosive environments. Sensible Heat Media only recovers temperature.

2. Total Heat Transfer Media

The total heat exchange media is made of ER paper which has a high moisture permeability, good air tightness and excellent tear resistance. The total heat exchange media recovers both temperature and humidity.

3. Counter Flow Heat Transfer Media

Armcor again has the solution; we have introduced a new range of counter flow heat exchangers made from aluminium, which has total separation of fresh and exhaust air systems and increases efficiency by up to 75%.

The Xchange modules can be applied to the following environments:

• Offices

• Hospitals

• Nursing Homes

• Apartment Complexes

• Schools

• Hotels

• Gymnasiums

• Domestic Applications

Productivity benefits for increased fresh air:

• Improved Indoor Air Quality

• Increased Staff Productivity

• Reduction in Sick Leave Days

• Reduced Respiratory Illness

• Reduced Allergies and Asthma

• Enhanced Staff Satisfaction

• Significant Positive Impact on Company’s Bottom Line

Recently Completed Project

Townsville International Sports Centre

Queensland

Heat recovery units were used to reduce temperature and humidity in Townsville’s newly completed sports centre, helping Australian athletes reach their full potential.

Sensible Heat Transfer Media

• 63% Single Pass

• 75% Double Pass

Total Heat Transfer Media

• 63% Single Pass

• 75% Double Pass

Counter Flow Heat Transfer Media

• 75% Single Pass

Xchange Energy Recovery™

Selecting an Xchange Heat Recovery Unit

We strive to make the selection of Xchange Heat Recovery units an easy thing to do. Armcor is committed to providing every customer with solutions and quality, every time.

Step 1

Calculate the amount of fresh air required for the project

Step 2

Select the type of Unit required:

• Ceiling Mounted – up to 1100 L/sec

• External Mounted – up to 10,000 L/sec

• Swimming Pool Unit – up to 8,000 L/sec

• Dehumidification Unit – up to 10,000 L/sec

• Rooftop Packaged Unit – up to 5000 L/sec

• Indirect Evaporative Cooling – up to 8000 L/sec

Step 3

Select the type of Heat Exchanger that would best suit your design:

1. Sensible type which transfers only heat and not humidity

2. Enthalpy type which transfers heat and humidity

Step 4

Use Armcor Air Solutions™ Quick Selection Guide for the correct unit, ensuring the physical dimensions, fan static pressures and airflow configurations will suit the application

Step 5

Use Armcor Air Solutions™ Quick Selection Report to obtain energy savings and efficiencies

Step 6

Contact Armcor Air Solutions™ Engineering Department for technical drawings and expert advice for proposed units

Recently Completed Project

Toyota Refurbishment

New South Wales

Expansion of Toyota provided an opportunity to engineer three specially constructed Heat Recovery Units to suit the ductwork layout. Contractor James L Williams was able to retain the existing ductwork plan and include Xchange Heat Recovery Units.

Recently Completed Project

Sharks

Bay

Multipurpose Sports Building

Western Australia

Government funded multipurpose room at Sharks Bay has ceiling mounted Xchange Heat Recovery units to provide fresh air into the room.

 



Xchange Energy Recovery™

Ceiling Mounted Units CM Series

Every building needs a constant supply of fresh outdoor air to keep the inhabitants healthy and comfortable. Outdoor air intake is usually too hot in summer and too cold in winter, causing added load on the airconditioning system and increasing the operating expenses.

Xchange Energy Recovery™ technology uses the heat of the stale indoor air to be expelled to either heat or cool the incoming fresh air to a temperature closer to the existing indoor air.

This process dramatically reduces the load on the airconditioning system and the operating costs.

Xchange Energy Recovery™ systems are both innovative and practical solutions to bring fresh outdoor air into the inside environment while exhausting stale humid air. This cost effective initiative enables the purchaser to earn valuable Green Star Points through the use of Armcor Air Solutions™ products.

Galvanised Sheetmetal Cabinet

• Long lasting and quality manufactured

Single Phase

• With 3 pin lead and plug on models XC 100 to 400 CM only

• XC 600 CM and above includes external isolator

Easy Access

• Front panel access or optional bottom access panel

Sustainable Solutions

• Exceeds AS 1668, Part 2

• Meets BCA Section J Requirements

• Earns Green Star Credit Points

• Reduces Operating Costs

Benefits of Xchange Heat Recovery

• Low Cost Solution

• Improves Indoor Air Quality

• Reduces Airconditioning Load

• Suitable for Connection to BMS System

• Suitable for Toilet Exhaust Applications

Sensible or Enthalpy Heat Exchange Media

Low Profile

• For ceiling installations

• Only 220mm high for XC 100 CM-1

Starting Collars

• Provided for easy ductwork connection

Insulated Cabinet for Noise Control

Direct Drive Fans

• Twin forward curved direct drive fans

Xchange Stand-alone System*

This option provides fresh healthy outdoor air directly into the room. This can be used with a separate airconditioning unit or stand alone system.

Xchange Connected to AC System*

This option reduces the load on the airconditioning unit as it pre-conditions the fresh air load.

* Figures quoted may differ according to outdoor conditions.

Recently Completed Project

Singleton Army Barracks

New South Wales

Expansion at the army barracks in Singleton, NSW provided Armcor an opportunity to engineer specially designed and built, external and ceiling mounted, Heat Recovery Units.

Ceiling Mounted Energy Recovery Units (CM) - Series 1

Recently Completed Project

Northern Community Mental Health

South Australia

Armcor Air Solutions™ manufactured ceiling mounted units for the new Mental Health Building to provide fresh air to patients, nursing staff and visitors.

Ceiling Mounted Energy Recovery Units (CM) - Series 2

Recently Completed Project

Southern Cross University

Sydney, New South Wales

Armcor Air Solutions™ manufactured Xchange Heat Recovery System using rotary heat wheels with up to 80% efficiency combined with a chilled water coil to pre-condition fresh air to the air handling units.

XC 100 CMLP-1

XC 200 CMLP-1

Phone: (03) 9330 4455

Ceiling Mounted Heat Recovery Mechanical Specifications

The heat recovery unit shall be supplied by Armcor Air Solutions (03) 9330 4455 complete with fans, heat exchangers, heavy duty galvanised cabinet, 25mm heavy density internal acoustic insulation and drain trays if required. Fans shall be dynamically balanced, forward curve with 3 speed direct drive motors.

Heat exchangers shall be sensible plate type factory tested to 700pa with no cross contamination or enthalpy type ER treated fibre type with efficiency not less than 60%

Performance Schedules

The units shall be supplied with

• 0-10V Inbuilt VSD or

• Manually Adjustable Speed Controller or

• Standard 3 Speed Motor Tapping Connection

Unit shall be isolated from the structure with heavy duty isolation spring mounts supplied by Armcor Air Solutions™ Upon completion of the installation of the unit, both fans shall be measured for airflow and adjusted to within 5% of each other for maximum efficiency.

Armcor

(03) 9330 4455

Armcor Air Solutions™

(03) 9330 4455

Recently Completed Project

Salvation Army Ministry Centre

South Australia

Specially designed rooftop package units were designed and manufactured by Armcor Air Solutions™ with heat recovery and 50kw cooling capacity to provide fresh air to the main auditorium.

Xchange Energy Recovery™

External Mounted Units

EM Series

Armcor Air Solutions™ offers a range of Xchange Energy Recovery Units specially designed for External or Plant Room installations for Heat Recovery up to 100% fresh air applications.

By using a high efficient sensible or enthalpy media, up to 75% reduction in operating costs can be achieved. Operational additions can include economy cycle, return air by-pass damper, chilled water coil and hot water coils. The cost to heat or cool fresh air without energy reclaim is very high. Our range of Xchange Energy Recovery™ Systems dramatically reduces the load on the airconditioning system and therefore reduces the operation costs. The savings through energy reclaim pays for itself in a very short period of time.

Armcor Air Solutions™ range of Xchange External Mounted Units includes a unique concept where the media can be removed in easy to handle modules for cleaning. This also

Recently Completed Project Gold Coast Hospital

Queensland

allows for unhindered access to the fan compartment for servicing and maintenance.

Xchange Energy Recovery™ technology provides energy efficient, sustainable fresh air solutions, combined with operating costs savings in a single unit while earning valuable Green Star Points

Sustainable Solutions

• Exceeds AS 1668, Part 2

• Meets BCA Section J Requirements

• Earns Green Star Credit Points

• Optional Gas Boiler Attached

Benefits of Xchange Heat Recovery

• Low Cost Solution

• Improves Indoor Air Quality

• Reduces Airconditioning Load

• Reduces Operating Costs

“This is the biggest hospital development ever undertaken in Queensland. It is a prime example of our commitment to growing with the Gold Coast”

- Dr Adrian Nowitzke, CEO, Gold Coast Health Service District

Armcor Air Solutions™ manufactured External Mounted Xchange Heat Recovery Units for the Gold Coast University Hospital.

Metu Frames Included

Optional Horizontal or Vertical Discharge

Optional AcousticBlok

Insulation

• Faced with perforated metal for additional attenuation

High Efficiency EC Motors

• Includes VSD, allows for high level of interface with building management systems. Direct coupled, no belts or pulleys

• High efficiency with 0-10 volt control

• 0 -100% speed control

• Electronic phase failure protection

• Alarm relay contacts

Heating Boiler

• Natural gas boilers up to 90kw attached to the unit

Hot Water or Chilled Water Coils

• Optional hot or chilled water coils with anticorrosive coating

Stainless Steel Drain Tray

Electrical Cabinet IP65

• Each motor wired and separately fused

Heat Recovery Media

• Large access doors for easy removal of media modules

• Optional return air bypass

• Enthalpy or Sensible heat exchange to reduce outdoor air load by up to 75%

• Optional economy cycle

• Aluminium plate non-corrosive heat exchanger

Support Base

• Galvanised Support Base

• Lifting lugs fitted

• Protective weatherproof cap

• Stainless steel fasteners

Recently Completed Project University of Sydney New South Wales

The new campus upgrade required quality fresh air to the lecture rooms for student comfort and enhanced learning conditions.

External Mounted Energy Recovery Units (EM) - Series 1

*Dimensions given are using multiple direct drive fans

Phone: (03) 9330

External Mounted Energy Recovery Units (EM) - Series 2

Side View

Optional Features

Plate heat exchanger

Economy Cycle R/A Bypass

BAC net Modbus

Sensible or enthalpy VSD 0-10vdc

Xchange Energy Recovery™

External Air To Air Heat Exchange Units Mechanical Specification

General

The heat recovery unit shall be Xchange manufacture and supplied by Armcor Air Solutions™ (03) 9330 4455. The units shall be factory assembled, internally wired throughout, with large access doors allowing full removal of the heat exchanger for service, cleaning and maintenance.

The unit shall be constructed of 50mm Colorbond® double skin panel and shall incorporate the following components:

• Supply air and exhaust air fans (forward curved direct drive or backward curved with EC motor)

• Hot and chilled water coils to meet the required capacities

• Air to air crossflow sensible or enthalpy plate heat exchanger with a minimum efficiency of 60%

• Integrated or inbuilt Variable Speed Drive’s (VSD’s) if required

• Economy cycle dampers to allow for free cooling when outside conditions are right

Construction

The unit shall be completely weatherproof and shall be constructed according to the following requirements:

• The unit casing shall be constructed from 50mm double skin Colorbond® panel

• The unit shall be mounted on a rigid galvanised base frame with crane points and spring mounts to reduce vibration and noise

• Powdercoated aluminium profiles shall be used to hold the casing together. The following extrusions shall be used H section, U section, base channel, corner joiner, door stop and angle

• The casing is to be fully sealed with non-perishable, mildew and mould resistant sealant and shall contain a VOC rating designed for extreme weather conditions

• Units shall have large access doors to allow the internal parts to be accessed easily and removed for cleaning, servicing, maintenance, repair or replacement

• The internal panels shall be lined with anti-corrosion paint to provide extra protection in corrosive environments

Heat Exchanger

Heat exchanger shall be a Sensible Aluminium Plate type or Enthalpy type ER treated fibre membranes with an efficiency of 60%.

Sensible Heat Exchanger shall be:

• Pressure tested to 700pa with no cross contamination

• Corrugated aluminium plates to improve heat transfer

• Crossflow in design

• Incorporate no moving parts

• Have entirely separate air paths for supply air and exhaust air

• Joins to be double lapped

• Be completely removable from the unit for servicing and cleaning

• Epoxy coated heat exchanged end plates for extra protection in corrosive environments

Enthalpy Heat Exchanger shall be:

• Enclosed in galvanised frame

• Manufactured from ER fibre high transfer media

• Distances between air channel not to exceed 3.5mm

Fans

• Fans shall be dynamically balanced forward curve or backward curve type

• Forward curve with direct drive motors with standard three speed tapping or 0-10vdc VSD

Performance

Coils

The coils shall be constructed from copper tubes with bonded aluminium fins and have the following features:

• The velocity through the coils shall be designed around 2.5 m/sec for low pressure drop and high efficiency

• Coils shall be pressure tested to 2200kPa (22 bar)

• The coils shall have an anti-corrosion coating such as blue fin coating for extra protection and longer life

• The coils shall meet the required capacities outlined in the schedules

Recently Completed Project Cole Street

Brighton, Victoria

Electrical

The unit is to be fully wired throughout and incorporate the following components:

• Integrated or Inbuilt Variable Speed Drive’s (VSD’s)

• CO2 Sensors

• Damper Motors for Bypass/Economy Cycle

• Internal Service Light

Architect designed residential property in the heart of Brighton’s Golden Mile, close to the beach front, has used Xchange Heat Recovery units to provide constant fresh air, 24 hours a day.

Xchange Energy Recovery™

Roof Mounted Package Units

ER Series

Armcor Air Solutions™ has developed and designed unique Xchange Roof Mounted Heat Recovery unit that can be easily connected to new or existing rooftop package applications.

The cost to heat or cool fresh air without energy reclaim is very high. Our range of Xchange Energy Recovery™ Systems dramatically reduces the load on the airconditioning system and therefore reduces the operation costs. The savings through energy reclaim pays for itself in a very short period of time.

The Xchange Roof Mounted Package Recovery System consists of a total heat exchanger for the transfer of temperature and moisture. The temperature from the return air (inside air) is transferred to the incoming fresh air, via the heat exchanger. The moisture from the incoming fresh air is transferred into the exhaust air stream.

Armcor Air Solutions™ range of Xchange Roof Mounted Package Recovery Units are available from 250 L/sec to 1250 L/sec and larger capacities up to 5000 L/sec can be customer designed and manufactured.

Xchange Energy Recovery™ technology provides energy efficient, sustainable fresh air solutions, combined with operating costs savings in a single unit, while earning valuable Green Star Points

25 Minute Installation in 4 Easy Steps

• Cut holes in return air ductwork

• Screw short adaptor plate on

• Install air scoops and bolt ERV Unit onto adaptor plate

• Suppor t the unit

Package Includes

• 3 Speed Fan - 240V Control

• Optional 0-10V Control or 24V Control

• Filters Included

• Exhaust Grilles/Hood Included

• Low Profile

• Unit Bolts Direct to Adapter Plate

• Low Cost

• Single Phase up to 1250 L/sec

• External W/P Isolater Provided

• 50mm Colorbond® Sandwich Panel

• Roof Support Bracket

Features

• Unique Design

• Attached to New or Existing Airconditioning Units

• Economy Cycle Option

• Time Saving Installation

• Custom Built Units up to 5000 L/sec

• 50mm Weatherproof Colorbond® Sandwich Panel

• Direct Drive Fans

• LH or RH Models

Roof Mounted Units Energy Savings*

Xchange Energy Recovery™

Roof Mounted Package Heat Recovery Units Mechanical Specification

General

The heat recovery unit shall be Xchange manufacture and supplied by Armcor Air Solutions™ (03) 9330 4455. The units shall be factory assembled with cabinet, fans, heat exchanger and filters.

Construction

The unit shall be completely weatherproof and shall be constructed according to the following requirements:

• The unit casing shall be constructed from 50mm double skin Colorbond® panel

• Powdercoated aluminium profiles shall be used to hold the casing together. The following extrusions shall be used H section, U section, base channel, corner joiner, door stop and angle

Heat Exchanger

Heat exchanger shall be a Sensible Aluminium Plate type or Enthalpy type ER treated fibre membranes with an efficiency of 60%.

Sensible Heat Exchanger shall be:

• Pressure tested to 700pa with no cross contamination

• Corrugated aluminium plates to improve heat transfer

• Crossflow in design

• Incorporate no moving parts

• Have entirely separate air paths for supply air and exhaust air

• Joins to be double lapped

• Completely removable from the unit for servicing and cleaning

• Epoxy coated heat exchanged end plate for extra protection in corrosive environments

Enthalpy Heat Exchanger shall be:

• Enclosed in galvanised frame

• Manufactured from ER fibre high transfer media

• Distances between air channel not to exceed 3.5mm

Fans

• Fans shall be dynamically balanced forward curve with direct drive motors with standard three speed tapping

Electrical

The unit is to be fully wired throughout and incorporate the following components:

• 0-10vdc in built VSD or

• Manually Adjustable Speed Controller or

• Standard 3 Speed Motor Tapping Connection

The units shall be supplied with a matched adaptor plate to connect to the return air duct of the airconditioning unit.

Economy cycle us to be provided with a separate air entry inlet grille, damper and filter.

9330 4455

9330 4455

Xchange Energy Recovery™

Swimming Pool Units EP Series

Armcor Air Solutions™ offers a range of Xchange Energy Recovery Units specially designed for Indoor Swimming Pool Applications.

The Xchange EP Series units are designed to operate with full fresh air (or with a return air by-pass if required) to remove condensation, chlorine and other contaminants to maintain a safe, non-corrosive pool environment.

Swimming pool areas require an indoor air temperature at least 2°C above the pool temperature and air circulation of a minimum of 8-10 air changes per hour.

Xchange Swimming Pool System*

Xchange sensible transfer media consists of aluminium plates which recover up to 75% of the heat in the exhaust air thereby minimising the heating and operational costs.

Armcor Air Solutions™ also manufacture ERV units with gas heating units and hot water coils, fully piped up and tested prior to delivery.

Xchange Energy Recovery technology allows the delivery of fresh air while minimising the heating load and earning valuable Green Star Points

This option provides fresh healthy outdoor air directly into the building. This can be used with a separate airconditioning unit or stand alone system.

Benefits of Xchange Heat Recovery

• Low Cost Solution

• Improves Indoor Air Quality

• Stops Structural Deterioration and Corrosion

• Stops Growth of Moulds, Bacteria and Fungi

• Reduces Operating Costs

Recently Completed Project YMCA Community Pool

Sustainable Solutions

• Exceeds AS 1668, Part 2

• Meets BCA Section J Requirements

• Earns Green Star Credit Points

• Optional Natural Gas Boilers Attached to the ERV Unit

Victoria YMCA pool has 5000 L/sec Xchange Heat Recovery™ EP Series unit with hot water coil.

Metu Frames Included

Electrical Cabinet IP65

• Each motor wired and separately fused

Phone: (03) 9330

Optional Horizontal or Vertical Discharge

Flexible connections on fan surrounds

Stainless Steel Drain Tray

Hot Water or Chilled Water Coils

• Optional hot water or chilled water coils with anti-corrosive coating

Support Base

• Galvanised support base

• Lifting lugs fitted

• Protective weatherproof cap

• Stainless steel fasteners

Fans

Internal Anti-Corrosive Protection

• Protective epoxy internal coating

• Powdercoated fans and stainless steel shafts

• Fans and motors are directly coupled for energy savings and reduced service calls

Swimming Pool Energy Recovery Units (EP) - Series 1

Side View

CxD

Optional Features

Plate heat exchanger

Sensible or enthalpy

Economy Cycle R/A Bypass

BAC net Modbus H

VSD 0-10vdc

Model No.Airflow (L/s) Ext Static (Pa) Dimensions* H x L x W (mm) S/A Spigot (mm) C x D R/A Spigot (mm) C x D Weight (Kg) Nominal Running Amps (Per Phase) Phase XC 300 EP3002501500 x 1800 x 600300 x 300300 x 300 16541 XC 400 EP4002501500 x 1800 x 600300 x 300300 x 30020061 XC 600 EP6002501800 x 1800 x 900350 x 600350 x 60022081 XC 800 EP8002501800 x 2100 x 900350 x 600350 x 60023091 XC 900 EP9002501900 x 2100 x 900350 x 600350 x 600260101 XC 1000 EP10002501900 x 2100 x 900350 x 600350 x 600320101 XC 1200 EP12002502000 x 2100 x 1300350 x 1000350 x 1000450121 XC 1500 EP15002502000 x 2100 x 1300350 x 1000350 x 1000550161 XC 2000 EP20003002000 x 2400 x 1300350 x 1000350 x 1000650201 XC 2500 EP25003002000 x 2400 x 1700350 x 1400350 x 1400750103 XC 3000 EP30003002000 x 2400 x 2100400 x 1700400 x 1700850123 XC 3500 EP35003002000 x 2400 x 2500400 x 2200400 x 22001100153 XC 4000 EP40003002000 x 2400 x 2900400 x 2600400 x 26001200153 XC 4500 EP45003002000 x 2400 x 3300400 x 3000400 x 30001300203 XC 5000 EP50003002000 x 2400 x 3700500 x 3400500 x 34001400203 XC 5500 EP55003002000 x 2400 x 3700500 x 3400500 x 34001500203 XC 6000 EP60003002000 x 2400 x 4100500 x 3800500 x 38001600223 XC 6500 EP65003002000 x 2400 x 4100500 x 3800500 x 38001700253 XC 7000 EP70003002000 x 2400 x 4500500 x 4200500 x 42001800303 XC 7500 EP75003002000 x 2400 x 4900500 x 4600500 x 46001900303 XC 8000 EP80003002000 x 2400 x 5300500 x 5000500 x 50002000353 XC 9000 EP90003002000 x 2400 x 5700500 x 5400500 x 54002200353 XC 10000 EP100003002000 x 2400 x 6100500 x 5800500 x 58002400403 Xchange Energy

48 | Armcor Buyers Guide All prices exclude GST

External Swimming Pool Units Mechanical Specification

General

The heat recovery unit shall be Xchange manufacture and supplied by Armcor Air Solutions™ (03) 9330 4455. The units shall be factory assembled, internally wired throughout, with large access doors allowing full removal of the heat exchanger for service, cleaning and maintenance.

The unit shall be constructed of 50mm Colorbond® double skin panel and shall incorporate the following components:

• Supply air and exhaust air fans (forward curved direct drive or backward curved)

• Hot and chilled water coils to meet the required capacities

• Air to air Crossflow sensible plate heat exchanger with a minimum efficiency of 60%

• Integrated or inbuilt Variable Speed Drive’s (VSD’s) if required

Construction

The unit shall be completely weatherproof and shall be constructed according to the following requirements:

• The unit casing shall be constructed from 50mm double skin Colorbond® panel

• The unit shall be mounted on a rigid galvanised base frame with crane points and spring mounts to reduce vibration and noise

• Powdercoated aluminium profiles shall be used to hold the casing together. The following extrusions shall be used H section, U section, base channel, corner joiner, door stop and angle

• The casing is to be fully sealed with non-perishable, mildew and mould resistant sealant and shall contain a VOC rating designed for extreme weather conditions

• Units shall have large access doors to allow the internal parts to be accessed easily and removed for cleaning, servicing, maintenance, repair or replacement

• The internal panels shall be lined with anti-corrosion paint to provide extra protection in corrosive environments

Heat Exchanger

Heat exchanger shall be a Sensible Aluminium Plate type with an efficiency of 60%.

• Pressure tested to 700pa with no cross contamination

• Corrugated aluminium plates to improve heat transfer

• Crossflow in design

• Incorporate no moving parts

• Have entirely separate air paths for supply air and exhaust air

• Joins to be double lapped

• Be completely removable from the unit for servicing and cleaning

• Epoxy costed heat exchanged end plate for extra protection in corrosive environments

Fans

• Fans shall be dynamically balanced backward curve type

• Direct drive motors

• Inbuilt VSD

• Performance to meet required airflows and static pressures

• Fans to be powdercoated for extra protection in corrosive environments

• Fan motors to be topic proof for extra protection in corrosive environments

Coils

The coils shall be constructed from copper tubes with bonded aluminium fins and have the following features:

• The velocity through the coils shall be designed around 2.5 m/sec for low pressure drop and high efficiency

• Coils shall be pressure tested to 2200kPa (22 bar)

• The coils shall have an anti-corrosion coating such as blue fin coating for extra protection and longer life

• The coils shall meet the required capacities outlined in the schedules

Electrical

The unit is to be fully wired throughout and incorporate the following components:

• Integrated or Inbuilt Variable Speed Drive’s (VSD’s)

• Internal Service Light

Xchange Energy Recovery™

Indirect Evaporative Cooling Units

IDEC Series 1 and 2

Indirect Evaporative Cooling Systems are designed to pre-cool fresh air in drier climates, especially where there is a need for large amounts of fresh air.

Using sensible heat exchangers a substantial reduction in temperature can be achieved without increasing moisture content normally associated with evaporative cooling. These units are very economical to run, using water instead of the refrigeration cycle to reduce the temperature. These systems are simple, effective, and economical and most importantly help reduce carbon emissions.

Armcor Air Solutions™ manufactures these units with renowned Celdeck pads, sensible aluminium heat exchange plates and multiple direct drive fans up to 3000 L/sec. Larger units up to 10,000 L/sec can be built including options on all models for VSD Plug Fans with EC motors, chilled and hot water cooling coils.

Recently Completed Project Brighton Retirement Village Victoria

Applications

Pre-cooling Fresh Air for AHU’s standalone Units for:

• Aged Care Buildings

• Large Foyers and Entrance Areas

• Stairwell Pressurisation

• Apartment Lobbies

• Industrial Applications

• Commercial Airconditioning

Armcor supplied an indirect evaporative cooling unit combined with heating coils for temperature control of passageways. Low running costs and simple installation provides the solution to hot and stuffy lobby areas.

Indirect Evaporative Cooling Units Mechanical Specification

General

The heat recovery unit shall be Xchange manufacture and supplied by Armcor Air Solutions™ (03) 9330 4455. The units shall be factory assembled, internally wired throughout, with large access doors allowing full removal of the heat exchanger for service, cleaning and maintenance.

The unit shall be constructed of 50mm Colorbond® double skin panel and shall incorporate the following components:

• Supply air and exhaust air fans (forward curved direct drive or backward curved with EC motor)

• Hot and chilled water coils to meet the required capacities

• Air to air crossflow sensible or enthalpy plate heat exchanger with a minimum efficiency of 60%

• Integrated or inbuilt Variable Speed Drive’s (VSD’s) if required

• Economy cycle dampers to allow for free cooling when outside conditions are right

Construction

The unit shall be completely weatherproof and shall be constructed according to the following requirements:

• The unit casing shall be constructed from 50mm double skin Colorbond® panel

• The unit shall be mounted on a rigid galvanised base frame with crane points and spring mounts to reduce vibration and noise

• Powdercoated aluminium profiles shall be used to hold the casing together. The following extrusions shall be used H section, U section, base channel, corner joiner, door stop and angle

• The casing is to be fully sealed with non-perishable, mildew and mould resistant sealant and shall contain a VOC rating designed for extreme weather conditions

• Units shall have large access doors to allow the internal parts to be accessed easily and removed for cleaning, servicing, maintenance, repair or replacement

• The internal panels shall be lined with anti-corrosion paint to provide extra protection in corrosive environments

Heat Exchanger

Heat exchanger shall be a Sensible Aluminium Plate type with an efficiency of 60%.

Sensible Heat Exchanger shall be:

• Pressure tested to 700pa with no cross contamination

• Corrugated aluminium plates to improve heat transfer

• Crossflow in design

• Incorporate no moving parts

• Have entirely separate air paths for supply air and exhaust air

• Joins to be double lapped

• Be completely removable from the unit for servicing and cleaning

• Epoxy costed heat exchanged end plate for extra protection in corrosive environments

Fans

• Fans shall be dynamically balanced forward curve or backward curve type

• Forward curve with direct drive motors with standard three speed tapping or 0-10vdc VSD

• Backward Curve Plug Fans with VSD or EC Motors

Coils

The coils shall be constructed from copper tubes with bonded aluminium fins and have the following features:

• The velocity through the coils shall be designed around 2.5 m/sec for low pressure drop and high efficiency

• Coils shall be pressure tested to 2200kPa (22 bar)

• The coils shall have an anti-corrosion coating such as blue fin coating for extra protection and longer life

• The coils shall meet the required capacities outlined in the schedules

Electrical

The unit is to be fully wired throughout and incorporate the following components:

• Integrated or inbuilt Variable Speed Drive’s (VSD’s)

• Damper motors for bypass/economy cycle

Indirect Evaporative Cooling ( I DEC ) - Series 1 (Single Pass)

Chilled & Hot Water Coils Plug Fans

*Dimensions given are using multiple direct drive fans Airflows up to 10,000 L/s available with higher static fans

Plate heat exchanger Sensible or enthalpy VSD 0-10vdc

BAC net Modbus

Indirect Evaporative Cooling ( I DEC ) - Series 2 (Double Pass)

*Dimensions given are using multiple direct drive fans **Airflows up to 10,000 L/s available with higher static fans

Chilled & Hot Water Coils Plug Fans

Plate heat exchanger Sensible or enthalpy VSD 0-10vdc

BAC net Modbus

Xchange Energy Recovery™

Dehumidification Pre-Conditioner Units

DHP Series (DHP)

The Dehumidification Pre-Conditioner Units are designed to pre-condition both the temperature and humidity of a building’s fresh air supply. This system is the idea solution where humid conditions exist or where it is not practical to recover exhaust air.

Advantages of DHP Units

• No return air required – 100% pressurisation

• Increased COP

• Can supply main AHU’s at return air temperature

• More effective and efficient controlling fresh air temperature

• Delivers outside air at room temperature

• Building AHU’s can be designed to handle the building sensible load

Recently Completed Project

Mainpoint Apartments

Southbank, Victoria

Standard Features Include

• Chilled Water Coils

• Airflow up to 10,000 L/sec

• High Efficient Sensible Heat Exchanger

• Forward Curve Direct Drive Multiple Fans

Operation

The DHP is designed to cool and dehumidify hot and humid outside air and supply the air to the return air temperature. As the air crosses the sensible heat exchanger, it is cooled by a chilled water coil, then crosses the heat exchanger again to reheat to room set point temperature.

Armcor manufactured a heat recovery unit for the rooftop pool and spa area of Mainpoint Apartments situated in the heart of the Melbourne CBD. The Xchange units stop damaging condensation and structural damage and provide a pleasant environment.

Dehumidifying Pre-Conditioners Layout

Series

Optional Extras

Xchange Energy Recovery™

External Dehumidification Units Mechanical Specification

General

The heat recovery unit shall be Xchange manufacture and supplied by Armcor Air Solutions™ (03) 9330 4455. The units shall be factory assembled, internally wired throughout, with large access doors allowing full removal of the heat exchanger for service, cleaning and maintenance. The unit shall be constructed of 50mm Colorbond® double skin panel and shall incorporate the following components:

• Supply air and fans (forward curved direct drive or backward curved with EC motor)

• Hot and chilled water coils to meet the required capacities

• Air to air Crossflow sensible heat exchanger with a minimum efficiency of 60%

• Integrated or inbuilt Variable Speed Drive’s (VSD’s) if required

Construction

The unit shall be completely weatherproof and shall be constructed according to the following requirements:

• The unit casing shall be constructed from 50mm double skin Colorbond® panel

• The unit shall be mounted on a rigid galvanised base frame with crane points and spring mounts to reduce vibration and noise

• Powdercoated aluminium profiles shall be used to hold the casing together. The following extrusions shall be used H section, U section, base channel, corner joiner, door stop and angle

• The casing is to be fully sealed with non-perishable, mildew and mould resistant sealant and shall contain a VOC rating designed for extreme weather conditions

• Units shall have large access doors to allow the internal parts to be accessed easily and removed for cleaning, servicing, maintenance, repair or replacement

• The internal panels shall be lined with anti-corrosion paint to provide extra protection in corrosive environments

Heat Exchanger

Heat exchanger shall be a Sensible Aluminium Plate type

• Pressure tested to 700pa with no cross contamination

• Corrugated aluminium plates to improve heat transfer

• Crossflow in design

• Incorporate no moving parts

• Have entirely separate air paths for supply air and exhaust air

• Joins to be double lapped

• Completely removable from the unit for servicing and cleaning

• Epoxy costed heat exchanged end plate for extra protection in corrosive environments

Fans

Fans shall be dynamically balanced forward curve or backward curve type

• Direct drive motors

• Inbuilt VSD

• Performance to meet required airflows and static pressures

• Fans to be Powdercoated for extra protection in corrosive environments

• Fan motors to be topic proof for extra protection in corrosive environments

Filters

The unit shall incorporate bag filters in the fresh air stream

Bypass Dampers

The unit shall incorporate a bypass damper between the fresh air supply and the fan chamber

Coils

The coils shall be constructed from copper tubes with bonded aluminium fins and have the following features:

• The velocity through the coils shall be designed not more than 2.5 m/sec for low pressure drop and high efficiency

• Coils shall be pressure tested to 2200kPa (22 bar)

• The coils shall have an anti-corrosion coating such as blue fin coating for extra protection and longer life

• The coils shall meet the required capacities outlined in the schedules

Electrical

The unit is to be fully wired throughout and incorporate the following components:

• Integrated or inbuilt Variable Speed Drive’s (VSD’s)

• Internal service light

Reverse Cycle Rooftop Package Units

RC-PAC Series

Reverse Cycle Rooftop Package Units are the latest addition to our comprehensive and every growing range of products.

These units are designed to pre-cool or pre-heat fresh air to standard return air temperatures or can be used as a standalone unit to heat and cool the occupied area.

Return Air Bypass Damper

• For cold morning start ups

Coolroom Panel cabinet minimising heat loss

Head pressure controlled outdoor fan

Outdoor Condensor

• Using R410A refrigerant gas

These units provide up to 100% fresh outdoor air with Xchange Energy Recovery. The unit can be controlled by temperature, humidity or CO2 sensor, or a combination of both.

Units are fully wired to the switchboard for easy and quick connection by onsite electricians. Armcor Air Solutions™ Engineering Department will provide your fresh air solutions.

Exhaust Air Intake Ductwork Connection

Economy Cycle

• Built in economy cycle for free heating and cooling bypassing heat exchange

Sensible or Enthalpy Heat Exchange Media

Supply Air Ductwork Connection

Support base with lifting lugs

Reverse Cycle Rooftop Package Units (RC-PAC Series)

Reverse Cycle Rooftop Package Units Mechanical Specification (RC-PAC Series)

General

The heat recovery unit shall be Xchange manufacture and supplied by Armcor Air Solutions™ (03) 9330 4455. The units shall be factory assembled, internally wired throughout, with large access doors allowing full removal of the heat exchanger for service, cleaning and maintenance.

The unit shall be constructed of 50mm Colorbond® double skin panel and shall incorporate the following components:

• Supply air and exhaust air fans (forward curved direct drive or backward curved with EC motor)

• DX water coils to meet the required capacities

• Air to air crossflow sensible or enthalpy plate heat exchanger with a minimum efficiency of 60%

• Integrated or inbuilt Variable Speed Drive’s (VSD’s) if required

• Economy cycle dampers to allow for free cooling when outside conditions are right

Construction

The unit shall be completely weatherproof and shall be constructed according to the following requirements:

• The unit casing shall be constructed from 50mm double skin Colorbond® panel

• The unit shall be mounted on a rigid galvanised base frame with crane points and spring mounts to reduce vibration and noise

• Powdercoated aluminium profiles shall be used to hold the casing together. The following extrusions shall be used H section, U section, base channel, corner joiner, door stop and angle

• The casing is to be fully sealed with non-perishable, mildew and mould resistant sealant and shall contain a VOC rating designed for extreme weather conditions

• Units shall have large access doors to allow the internal parts to be accessed easily and removed for cleaning, servicing, maintenance, repair or replacement

• The internal panels shall be lined with anti-corrosion paint to provide extra protection in corrosive environments

Heat Exchanger

Heat exchanger shall be a Sensible Aluminium Plate type or Enthalpy type ER treated fibre membranes with an efficiency of 60%.

Sensible Heat Exchanger shall be:

• Pressure tested to 700pa with no cross contamination

• Corrugated aluminium plates to improve heat transfer

• Crossflow in design

• Incorporate no moving parts

• Have entirely separate air paths for supply air and exhaust air

• Joins to be double lapped

• Completely removable from the unit for servicing and cleaning

• Epoxy costed heat exchanged end plate for extra protection in corrosive environments

Enthalpy Heat Exchanger shall be:

• Enclosed in galvanised frame

• Manufactured from ER fibre high transfer media

• Distances between air channel not to exceed 3.5mm Fans

• Fans shall be dynamically balanced forward curve or backward curve type

• Forward curve with direct drive motors with standard three speed tapping or 0-10vdc VSD

Coils

The coils shall be constructed from copper tubes with bonded aluminium fins and have the following features:

• The velocity through the coils shall be designed around 2.5 m/sec for low pressure drop and high efficiency

• Coils shall be pressure tested to 2200kPa (22 bar)

• The coils shall have an anti-corrosion coating such as blue fin coating for extra protection and longer life

• The coils shall meet the required capacities outlined in the schedules

Electrical

The unit is to be fully wired throughout and incorporate the following components:

• Integrated or inbuilt Variable Speed Drive’s (VSD’s)

• CO2 sensors

• Damper motors for bypass/economy cycle

• Internal service light

Xchange Energy Recovery™

Estimated Energy Reclaimed by Heat Exchanger Cooling* (Kw) - (Enthalpy)

*Based on

Ambient Design Conditions

Recently Completed Project Women’s and Children’s’ Hospital

Canberra, Australian Capital Territory

Canberra’s newest hospital has selected Armcor Air Solutions™ Heat Recovery Units using sensible only media to recover the energy from exhaust air.

Estimated Energy Reclaimed by Heat Exchanger

Cooling* (Kw) - (Sensible)

*Based on 24°C/50%RH Indoor Conditions

*Based on AIRAH Ambient Design Conditions

Recently Completed Project Wuchopperen Health Services

Queensland

Busy health clinic in Cairns used eight Xchange Heat Recovery units – a new approach the keeping doctors, patients and nurses in comfortable working environment.

Xchange Energy Recovery™

Estimated Energy Reclaimed by Heat Exchanger

Heating* (Kw) - (Enthalpy)

*Based on 21°C/50%RH Indoor Conditions

*Based on AIRAH Ambient Design Conditions

Recently Completed Project

Joondalup Hospital

Perth, Western Australia

Located in Perth, Western Australia, Joondalup Hospital used fresh air heat recovery units with hot water and chilled water coils.

Phone: (03) 9330 4455

Estimated Energy Reclaimed by

Heating* (Kw) - (Sensible)

Heat Exchanger

*Based on AIRAH Ambient Design Conditions

Recently Completed Project

Wodonga Entertainment Centre Victoria

The latest external mounted Xchange Energy Recovery™ unit with 75mm Colorbond® panel has been used to provide fresh air to the air handling units. The main auditorium at Wodonga seats up to 800 people and provides fresh air by using high efficiency EC plug fans.

Specialised Sheetmetal

We have recently upgraded our production by installing the latest technology automated plasma cutting machine which produces accurate, clean and speedy cutting time.

Specialised Sheetmetal

Armcor Air Solutions™ has a specialised sheetmetal workshop for the airconditioning contractor that is well known and recognised as the ‘ best quality ductwork’ anywhere in Melbourne. We specialise in Sheetmetal Ductwork, internally lined, plain or externally lagged to meet many and varied specifications.

Sheetmetal Ductwork is widely used in many commercial applications to handle large quantities of airflow that are unable to flow through flexible ductwork. It is durable, strong, easy to install and weatherproof, making it a very important part of an airconditioning system.

New 2011 BCA Code Section J

Our range includes not only straight lengths, but bends, offsets, flexible connections and flashings. We use only superior quality Galvanised or Zincalume material so you can be assured of premium quality ductwork every time. We have recently upgraded our production by installing the latest technology automated plasma cutting machine which produces accurate, clean and speedy cutting time.

We are pleased to offer all our customers a ‘call today, delivery tomorrow’ service.

1.2R 3.0R 2.0

Specialised Sheetmetal

Plain Sheetmetal Ductwork

Sheetmetal Radius Bends

Internally Insulated Sheetmetal Ductwork with 5mm Foam

Sheetmetal Slip Joins

Internal joins for Sheetmetal ductwork where space is restricted on exposed ductwork.

Bolted Frames

Flexible Connections

Duct Joining Accessories

Ductwork Insulation

Starting Collars

Includes external locking nut for adjustment

Recently Completed Project

Werribee Open Range Zoo

Victoria

One of Melbourne’s well known zoo’s has an Armcor Air Solutions™ Xchange Heat Recovery™ Unit especially built to provide fresh air into the enclosed gorilla exhibit. Helps keep the animals happy, with a supply of fresh air, at reduced running costs.

Ductwork Design

1. Heating Airconditioning Load

The following check figures represent heating and cooling capacities for various states in Australia. This is an installer check but makes no attempt to cover all possibilities for glass, insulation and weather conditions.

For example, an office building in Melbourne Area 200m² x 130 watts/m² = 26,000 Watts = 26kw Capacity Unit Required.

2. BCA Insulation Requirements for Ductwork

The following table provides a simplified summary of BCA 2010 vol J.5.2. Please contact the BCA for the current regulations.

3. New 2011 BCA Code Section J

4. Guidelines on Ductwork and Grille Sizing

Charts are recommended based on years of experience and represent an accurate guide only. Size your ductwork correctly and you will achieve a quieter, more efficient heating or cooling system.

5. Airflow Calculator for Sheetmetal Ductwork

This chart gives airflow rates in L/sec with 6.0m/sec velocity. This provides a quick check of the airflow.

Specialised Sheetmetal

6. Recommended Duct Velocities

If sound is critical, always use a lower velocity rate

Recently Completed Project

Melbourne Markets

Victoria

Melbourne’s new wholesale fresh fruit and vegetable market is locating to the northern suburbs of Epping off the main transportation hub from Hume Fwy. The Xchange units provide fresh air, using sensible media, in specifically designed and constructed ceiling mounted units.

6 metres long Ø300 at 8 Pa

7. Flexible Ductwork Selection

Gooseneck Ductwork Terminals for Rooftop Applications

Low Profile Ductwork Terminals for Rooftop Applications

Fresh Air Intakes

Recently Completed Project RACV Office

Melbourne, Victoria

RACV is Victoria’s Emergency Response to Vehicle Breakdown and has selected Armcor’s Xchange Heat Recovery to provide fresh air to the their new Melbourne CBD offices.

Flange Capping

Flange Capping is used to create a weatherproof cover to exposed flanges preventing water damage inside the ductwork. Free template with each order to assist in cutting corners. Quick easy and neat to fabricate.

Cushion Boxes

Side entry diffuser boxes general have a much lower pressure than top entry diffuser boxes. While top is satisfactory, if the flexible ductwork is support and makes a gentle radius (1.5 times duct diameter). However if the flexible ductwork is left unsupported it will kink when connected to the diffuser adding significantly to the pressure loss. Side entry boxes also improve air distribution.

Side Entry Ceiling

Registers vs Adaptors

Recently Completed Project Private Meeting Room Pavilion

Located at the heart of the holiday resort on Australia’s western coastline, Private Meeting Room Pavilion has Ceiling Mounted Xchange Heat Recovery units installed. Constructed from Colorbond® panel with EC plug fans , operated by 0-10v dc signal, Armcor engineering skills have designed even the smallest unit for clean energy savings and operational efficiencies.

Neck Adaptors

To suit ceiling registers and grilles. Painted black inside.

Filter Return Air Boxes

Price for boxes include 50mm

Supply Air and Return Air Design Recommendations

• If a unit is supplied with specific size duct spigots, do not use ducting of a smaller size. If the duct run is more than 3 metres, we recommend using the next size up.

• To change the existing number of outlets on a low profile unit, the cross sectional area of the new outlets must be equal to or greater than the original outlet. It must not be less.

• Do not blank off an outlet at the spigot plate

• Avoid short outlet plenum boxes with size outlets close to the unit. This type of plenum generates high pressure loses, turbulence and noise. Longer plenums with side outlets away from the unit or short plenums with front outlets are better.

Square to Round Transitions

Includes 5mm external insulation and one starting collar. Code Description

60-1131245 x 755 Square to Round Transition$70.00

60-1132250 x 1150 Square to Round Transition$98.00

60-1133355 x 945 Square to Round Transition$91.00

60-1134355 x 1125 Square to Round Transition$103.20

60-1135400 x 400 Square to Round Transition$56.00

60-1136500 x 500 Square to Round Transition$70.00

60-1137600 x 600 Square to Round Transition$84.00

60-1138750 x 750 Square to Round Transition$105.00

60-1139Offset Square to Round Transitions POA

Supply Air V Boxes

Includes 5mm external foam insulation and two starting collars. Code Description

60-1140245 x 755 Supply Air V Box

60-1141250 x 1150 Supply Air V Box

60-1142355 x 945 Supply Air V Box

x 1125 Supply Air V Box

x 400 Supply Air V Box

60-1145500 x 500 Supply Air V Box

60-1146600 x 600 Supply Air V Box

x 750 Supply Air V Box

Plain Plenum Boxes

Insulated Plenum Boxes

Recently Completed Project YMCA

Derrimut, Victoria

Located in Western Melbourne to meet the growing population demands, YMCA used a 5000 L/sec swimming pool unit complete with a hot water coil for condensation control.

Specialised Sheetmetal

Linear Slot Boxes

• All starting collars are side entry

• 25mm internally insulated boxes are stepped

See linear slot grilles - page 114

Recently Completed Project Trinity Grammar School

Victoria

One of Melbourne’s most elite schools working with Unow Lai Consulting Engineers selected nine Xchange Heat Recovery Units.

Drain Trays

Supplied with 20mm PVC drain fitting. Stainless Steel Drain Trays made to order.

Carrier Comfort Zone System

Carrier Comfort Zone Dampers

• Dampers included

• Round insulated body

• Damper shaft with bearing locators on both ends

• Oval damper blade with gasket seal

• Motor fitted (motor not included in the price)

Dropper Ducts

Dropper Duct Flashing Kits for Tile or Metal Roof

Dropper Duct Adaptors

Unit Supports

• Supports roof mounted condensors or fan units

• Zincalume available on request

Flat Sheets

Galvanised or Zincalume Flashings

Colorbond® Flashings

Colorbond® Colour Chart

Please note: Colour samples are provided only as a guide to choosing colours. Due to the printing process, the colours shown might not be an exact representation. Colorbond® and colour names are registered trademarks of Bluescope Steel Ltd.

Surfmist

Windspray

Ironstone

Deep Ocean

Evening Haze

Pale Eucalypt

Wilderness

Cottage Green

Shale Grey

Sandbank

Jasper Loft

Classic Cream

Paperbark

Headland

Manor Red

Dune

Bushland

Woodland Grey

Monument

Roof Access Hatch

• Roof Access Hatch with gas struts, soaker flashing, padbolt

• Available in galvanised or zincalume material

Four Piece Square Metal Roof Underflashings

Assembled Square Metal Roof Underflashings

Over Flashings

Round Upstands

• Use for Fresh Air Inlet or Exhaust Air

• Round upstands for use with China Hats - see page 107

• Suitable to be used for underflashings or overflashings

• When using as underflashings add $10.00 for soaker piece

• Supplied with star ting collar for duct connection

Louvre Screens

Optional Extras

• Support posts with mounting feet

• Zinc battens

• Infill corner pieces

• Access doors

• Any size made to order

• Full design service available

Louvre Screens

Enclose your rooftop plant area to conceal the equipment from view. Manufactured from weatherproof Zincalume sheet, Colorbond® or powdercoated to any colour of your choice. Screens include rear corner plates and crane hooks.

Walkway Systems

Reinforced fibre walkway systems. Recommended for safe access to roof mounted systems

Features

• Light weight reinforced fibre

• Modular panels

• High grip pattern

• No galvanic Corrosion

• Complies with AS1657, 1992

• Colour: Windspray Grey, Safety Yellow

Recently Completed Project

Mt Buller Ski Resort

Victoria

Victoria’s premier ski resort used an Xchange Heat Recovery System to recover heat though the Mechanical Ventilation systems and transfers it to the incoming fresh air.

Galvanised Spiro Ductwork

Galvanised Spiro Radius Bends and Joiners

Curved Face Registers to suit Spiro Duct - see page 114

Recently Completed Project

Synchroton Additional Facilities

Victoria

Armcor Air Solutions™ Xchange Heat Recovery Units were used throughout the entire facility providing the fresh air to individual suites. This was a government initiative to provide accommodation to overseas science students to improve the research and development in Australia.

Acoustic Attenuators for Noise Control

In today’s modern buildings, there is an increasing need to provide larger air flows whilst minimizing noise impact effects on the environment.

Circular Attenuators

1. Flexible Range 150mm-400mmo

2. Circular Duct Type 300mm-2000mmo

Noise Rating Table

Typical overall sound pressure levels produced by some everyday sources.

Circular Attenuators

Lightweight and flexible silencers are economically prices to reduce excessive noise within ducted systems. Silencers can be fitted to inlet and outlets of fans, ductwork, grilles and louvers.

Constructed from spun aluminium and plates, the outer case is metalised liner and high performance acoustic lining.

Specialised Sheetmetal

Square Duct Attenuators

Manufactured from galvanised sheetmetal with Metu frames both ends and internally insulated with heavy density polyester insulation and lined with perforated galvanised sheet on the inside. Manufactured to any dimensions and length. Please contact our Sales Engineer for more details.

Cross Talk Attenuators

Cross Talk Attenuators are used to eliminate noise between offices where relief air is needed. Suitable for Boardrooms, CEO Offices where private conversations need to be guarded.

Installation Accessories

A complete range of Installation Accessories for the Mechanical Services contractor and installation is stocked at our warehouse to ensure fast, easy and complete installation in a professional manner.

Statement of Values

At Armcor Air Solutions™ we are committed to:

• High standards of loyalty, integrity and honesty

• Treat all customers with respect and provide them with the highest level of product knowledge

• Provide a specialist range of products that will suit the industry

• Ensuring a high standard of manufacturing and quality products

• Providing safe and healthy work practises

• Research and Development of products that meet and exceed current environmental standards

• Responsibly care for all our employees and their families

• Suppor t and encourage all employees to acquire new industry based skills and knowledge.

Company Profile

Armcor Air Solutions™ is an established family business dedicated to the design and manufacture of specialised HVAC energy efficient products. We have over 30 years experience and have manufactured a range of fresh air HVAC systems and sheetmetal components to service the airconditioning industry.

Armcor Air Solutions™ maintains a commitment to provide a high level of products and systems that are effective, innovative and practical. A complete after-sales backup service continues as a priority.

While developing and supplying a premier range of products, Armcor Air Solutions strives to continually improve and update its product range. We welcome every opportunity to assist customers in appreciating the quality features and benefits available in our products.

Our commitment is to research and develop products that meet and exceed current government and environmental requirements

Refrigeration Pipe Cover Capping

Used to cover pipework and electrical wiring connecting to a/c systems, improves the appearance of the installation. Comes in all Colorbond® colours.

End Caps and Corners

See Colorbond® Color Chart - page 87

Recently Completed Project

Royal Flying Doctors Service

Northern Territory

New facilities for the renowned Royal Flying Doctors Service was funded by government and voluntary donations. Armcor supplied Xchange Heat Recovery Units to assist the administration staff.

Installation Accessories

Condensate Pumps

Mini Orange

The Mini Orange condensate pumps allow great installation flexibility. Perfect for fitting quickly and easily either above the false ceiling, behind wall-mounted evaporators or in the plastic conduit.

Mini Blanc

Designed to be fitted below the indoor unit, the Mini Blanc offers an extremely easy to install mini pump for all wall and ceiling suspended indoor units.

Mini Lime

The Mini Lime pumps are completely unique, in both their design and installation advantages. The pumps are clipped directly onto the reservoir so there is minimal suction lift. The Lime pumps are completely reversible and also benefit from easy access for servicing. Includes 800mm Conduit, Ceiling Plate and Elbow

Condensor Mounting Brackets

Galvanised Wall Bracket

Split System Drain Hose

Ezi Slab

• Underside is not hollow - ensuring maximum stability and no sagging

• Condenser units can be fastened directly to base

• 500 kg load capacity

Plastic Condenser Mounting Blocks

Recently Completed Project Gold Coast Hospital

Queensland

“This is the biggest hospital development ever undertaken in Queensland. It is a prime example of our commitment to growing with the Gold Coast”

- Dr Adrian Nowitzke, CEO, Gold Coast Health Service District

Armcor Air Solutions™ manufactured External Mounted Xchange Heat Recovery™ Units for the Gold Coast University Hospital.

Nylon Anchors

Self Drilling Screws

Plasterboard

Hex

Galvanised

Suspension Products

Installation Accessories

Slotted Angle and Channel

Threaded Rod

Multifit Drill Bit

Holesaw

Vibration Isolation Hanging Bracket

• Rubber prevents vibration noise transmission from air ducts and other ventilation devices to parts of the buildings

• Suits 10mm Threaded Rod

• Suppor ts up to 500kg

Decktites

Silicone and Sealant

Duct

Pair Coil Copper

Soft Drawn Copper

Hard Drawn Copper

Copper Pipe Insulation

China Hats

Gas Cowls

Recently Completed Project

Salvation Army Ministry Centre South Australia

Armcor manufactured Xchange Heat Recovery units combined with an airconditioning system to maintain a constant temperature in the main auditorium.

Waffle Pad

Rubber Vibration Mounts

Anti-Vibration Neoprene Mounts

• Neoprene mounts are ideal for reducing noise and vibration on split systems, airconditioning units, fans, pumps and chillers

• Mounts are moulded in oil resistant neoprene with threaded insert for fastening

• Non-skid rubber base requires no bolting down

• Colour coded for easy load identification

• All Mounts come with Bolt and Washer to suit

Spring Mounts

• Spring mounts have separate top and bottom locating cups made of moulded noise neoprene with non-skid surface and heavy duty steel strapping

• Used for packaged airconditioners, fans, pumps, piping supports and compressors

Heavy Duty Spring Mounts

• Anti Vibration mount with adjustable height settings

• Suitable for Airconditioning Units, Pumps, Fan Units, Machinery

• Available from 30kg to 500kg

Suspension Spring Mounts

• Suspension spring mounts suitable for hanging equipment anywhere where vibration is likely to transmit to the building structure

• Suitable for Heat Recovery Units, Pumps, Fan Units and Pipework

Rubber Mounts

• Rubber anti vibration mounts for hanging smaller equipment

Installation Accessories

Thermostat Wire

Colour coded low voltage wire to suit thermostat terminals. Three core for heating and fan controls and five core to suit airconditioning controls.

Cable Ties

In Line Fans

Mixed Flow Fans

• High Airflow Pressure Development

• Contiguously rated for 30,000 hours

• Compact Design

Phone: (03) 9330 4455

• Max Airflow 253 L/sec max pressure drop 300 PA (see graph)

• Easy Mounting Method

• 4 Year Warranty

Half Fixing Saddles

Conduit

Solid Plastic Adaptor Boxes

Grey Corrugated Conduit

Rigid Conduit

External Isolators

Hinged Eggcrate Filter Grilles

Plastic Eggcrate Sheet

Double Deflection Grilles with Removable Core

Weatherproof External Louvre Grilles

Installation Accessories

4 Way Ceiling Registers

To suit Cushion Boxes - page 78

Linear Slot Grilles

Linear Slot Grilles are being used increasingly in new and upmarket domestic applications providing style and visual appeal to many clients.

Armcor now stocks a complete new range of Linear Slot Grilles and Boxes available for next day delivery.

Grille Features

• White Powdercoated

• Adjustable Vanes

• Easy to Install with Removable Core

• Safety Chain

2 Slot Grilles

See Linear Slot Boxes - page 82

3 Slot Grilles

See Linear Slot Boxes - page 82

Curved Face Registers

To suit Spiro Duct - page 92

Security Condensor Cages

• Secure Airconditioning equipment from damage and theft

• Zinc Plated and Black Powdercoated finish

Filter Media

Disposable V Form Filters

Metal Frame V Form Filters

Flat Metal Frame Filters

Brass Manifold Gauge Set

• Two way brass manifold with side access handles

• Set includes sight glass and protective boots

• R22, R12, R502 - PSI, kPA, ºC. 1/4” SAE Connections

• R410A, 5/16” SAE Connections

Charging Hose Sets

Charging Hose Sets with Shut off Valves

• Charging hose set includes a red, blue and yellow hose

• Charging hose sets including red, blue and yellow hoses with shut off valves. Stops releasing gas into the atmosphere

•

•

1/4” SAE Connections

5/16” SAE Connections

Installation Accessories

Shut Off Valves with Hoses

• Multi-purpose ball valve with blue, red and yellow handles and 150mm short hoses.

• R22, 1/4” SAE Connections

• R410A, 5/16” SAE Connections

Hose Adaptors

90° Swivel Adaptor with valve core fitting for hard to access service valves

R410A Adaptor

Adaptor for R410A and R22

Hose Gasket Seal Kit

Pack Containing three rubber gaskets and one valve core insert

Rubber Protective Gauge Boots

Suits all standard gauges

Nitrogen Regulators

• Dual Nitrogen gauge suitable for testing all systems including R410A

• Handles pressure up to 5000 kPA. S

Nitrogen Hose Set 1

The Nitrogen Kit 1 sets a new standard in convenience and portability for airconditioning applications. It is no longer necessary to carry nitrogen and refrigerant bottles. With 6m or 10m hose and fittings it provides the ultimate flexibility on site.

Includes:

• 6m nitrogen hose with 1/4” fittings

• 150mm shut off valve to suit 1/4” fittings

• Rubber cones with access valve connections for insertion into copper pipe from 20-32mm for shield welding and cleaning of condensate drains

Nitrogen Hose Set 2

Nitrogen Complete Set includes both the Regulator and Hose Kit in one convenient package

Installation Accessories

Airrex Vacuum Pump

Quality two stage Vacuum Pumps suits all application for Airconditioning and Refrigeration systems.

Features:

• Two Stage Pump

• 140 Litres/second @ 240v/60Hz

• Non Slip Cushioned Handle

• Rubber Feet

• Weight – 15kg

• 1 x 3/8” and 1 x 1/4” Hose Connection

A vacuum pump must be capable of pulling a vacuum of at least 92.7 Hg or 100.59 kPa to boil off moisture in the complete system under all ambient conditions.

If the vacuum pump cannot pull a sufficient vacuum to ‘boil off’ the moisture then it is of no value to leave a system under vacuum for an extended time.

It is of upmost importance that the quality and quantity of oil in the vacuum pump is maintained at all times.

Vacuum Pump Fittings

For faster economical vacuum try our Vacuum Hose set with 3/8” x 900 long Vacuum Hose with 5/16” adaptor for R410A, two adaptors to suit 1/4” manifold and no core depressors for full flow.

Union

Charge hose reducing union connection from 1/4” – 5/16” SAE. Handy adaptor to use your Vacuum Pump for R410A

Electronic Leak Detector

Electronic Leak detector offers accurate and reliable solution to leak detection. Three levels of sensitivity and five levels of detection. Detectors leaks as small as 3 grams per year. Complete with plastic carry case. Made in USA.

Product CodeDescription

Price 80-1252Electronic Leak Detector $360.00

Electronic Refrigerant Scales

Electronic scales with 110kg tank capacity and charge program alarm. Programmable to tank capacity, and charge to previously stored amounts. Three hour auto shut off function. Made in USA.

Features:

• 110kg Tank Capacity

• Resolution 0/01kg

• Battery Life 40 Hours

• Accuracy + _ 0.01kg

• Operation temperature 0 - 49°C

• 220 x 220mm Platform

Product CodeDescription

Price 80-1253Electronic Refrigerant Scales $453.80

Recently Completed Project

Joondalup Hospital

Perth, Western Australia

Located in Perth, Western Australia, Joondalup Hospital used fresh air recovery units with hot water and chilled water coils.

Installation Accessories

Eccentric Cone Flarer

• Superior quality Flaring tool with tube cutter, internal and external reamer, ratchet wrench and strong carry case

• Eccentric Cone Flaring tool with ratchet wrench

• 1/4” – 3/4” Suits 410A

Cone Flare

Multi Head Tuber Benders

• Ratchet tube bender sets includes bender heads for 3/8”, 1/2”, 5/8”, 3/4” and 7/8” soft tubing

• Set includes 5 bender heads, tube cutter and reamer in strong plastic case

Tube Expander Tool

• Copper tube expanders with quality expander heads, plastic body reamer and steel carry case

• Refrigeration set includes 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1” heads

Expander Tool Heads

• Quality expander heads to add to plumber or refrigeration sets

Heavy Duty PVC Pipe Cutter

Makes a clean, square cut on plastic pipe up to 42mm. A must for every tool box.

Ratchet Cutters

• When you don’t have swing room, ratchet action allows cutting the way around tubing easy

• Available in two sizes each cutting a large variety of size copper

• Made in USA

Copper Tube Cutters

Aluminium Alloy Body Copper Tube Cutters

Installation Accessories

External Bending Springs

Three in One Hand Tube Bender

Three sizes in one tool. Bends up to 180º sizes. 6mm (1/4”), 8mm (5/16”), 10mm (3/8”).

Hand Tube Bender

Sturdy one piece tube bender with plastic handle grips. Bends to 180º.

Two Piece Benders

Lightweight quality benders to perform precision bends quickly and easily. Guideline dimensions stamped on bender head. Versatile and rigid tool for plumbing and refrigeration.

Flared Unions

Flared Nuts

Cap Nuts

Flared Elbows

Installation Accessories

Recently Completed Project

Women’s and Children’s’ Hospital

Canberra, Australian Capital Territory

Canberra’s newest hospital has selected Armcor Air Solutions Heat Recovery Units using sensible only media to recover the energy from exhaust air.

Valve Caps

Access Valves

Core valve with 100mm copper tails, valve core and cap

Capillary Tube

1/8” copper capillary tube with 1/4” flare nuts on both ends. Specially designed to use with wall mounted gauges.

Disclaimer

Prices are subject to change without notice. We recommend you check prices at time of placing order. Prices shown are trade prices and may be subject to discounts. Prices exclude GST and delivery. Whilst all care has been taken, responsibility for errors, omissions or variation will not be accepted. All sales are subject to our Standard Terms and Conditions of Sale as published in this catalogue and on the reverse side of Armcor delivery

Armcor Air Solutions

Terms and Conditions of Sale

Armcor Air Solutions™ shall only supply goods to you ‘The Customer’ on the following terms and conditions of sale unless we agree, in writing, to vary these terms and conditions.

1. Terms of Payment

1.1 Approved credit is extended the discretion of Armcor Air Solutions™ and may be withdrawn without notice temporarily or for an extended time at our discretion.

1.2 All invoices are due and payable in full 30 days from the date on the invoice.

1.3 Should The Customer fail to pay any invoices by the due date then:

a. We may charge interest on any overdue invoices at the rate of 1.5%, calculated and payable daily, compounded from the due date until the invoice is paid in full;

b. The Customer shall pay all our costs and expenses (including legal costs determined as between solicitors and mercantile agents fees) which may be incurred in the recovery or attempted recovery of the overdue amounts from the Customer.

1.4 Non approved accounts will be strictly C.O.D.

1.5 All payments to be made in Australian Currency.

1.6 Armcor Air Solutions™ reserves the right at any time to demand full or partial payment before proceeding or processing further with an order.

2. Pricing and Delivery

2.1 All prices are subject to change without notice.

2.2 GST at the prevailing rate at the date of invoice will be included in the amount due and payable on the invoice.

2.3 While we will use all reasonable endeavours to comply with the Customers delivery requirements and order specifications, the Customer will not be entitled to cancel the whole or part of any order to claim compensation by reason of failure to comply with the Customers delivery requirements or minor variations to the goods as a result of changes to the manufacturing process or specifications.

2.4 Where on site work is included in the contract, Armcor Air Solutions™ shall be solely responsible to the Customer and/or agents for directions, orders, measurements set outs, liaison with other trades and delivery times. Such directions shall not be interfered with by any other parties such as union officials and their agents, other trades, property owners or tenants and the Customer agrees that Armcor Air Solutions™ shall not be held responsible for any decision made by any such parties. Unrestricted access to be provided during Armcor Air Solutions™’ normal business hours. (Monday-Friday 7.00am-4.30pm).

3. Force Majeure

3.1 Armcor Air Solutions™ reserve the right to cancel, suspend, or delay despatch in the event of and during acts of God, wars, civil commotion, epidemics, embargoes, floods, fires, shortage of fuel, raw material, transportation or labour, the imposition to government controls or requirements, accidents or breakdowns in or to Armcor Air Solutions™’ works, plant or machinery, or any other circumstances of any kind whatsoever beyond our control affecting or interfering with production or delivery of the goods and Armcor Air Solutions™ shall not be liable to make good any damages or loss whether arising directly or indirectly out of any such delay, suspension or cancellation.

4. Reservation of Title

4.1 All goods supplied to the Customer are subject to retention of title. Ownership of the goods delivered by us is only transferred when the Customer has paid all amounts owing to Armcor Air Solutions™ on any account whatsoever and until such time Armcor Air Solutions™ reserves the right to call for recovery of the goods at our option (for which purpose our employees or agents may enter the premises or elsewhere where the goods are stored or installed) and the Customer is obliged to deliver up the goods if so directed by Armcor Air Solutions™.

4.2 In the event of the appointment of a Receiver and Manager, Liquidator, Agent in Possession of Execution of Distress, Armcor Air Solutions™ may enter the Customer’s premises or elsewhere where the goods are stored or installed and recover them. The Customer acknowledges and guarantees such right of entry.

5. Risk

5.1 Notwithstanding the provisions of Clause 4 the Customer accepts all risk and damage to the goods, whether caused by you or not, following the delivery or installation of the goods.

6. Claims

6.1 Any claims for short delivery must be made in writing within 7 days of date of delivery.

6.2 No other claims for any other reason whatsoever will be recognised unless made in writing within 7 days of date of delivery or installation of goods.

6.3 Where Airconditioning and Heating equipment has been installed, operation will only be guaranteed with proper and adequate wall and ceiling insulation, external shading to outside windows and operation according to Armcor Air Solutions™’ specifications.

7. Return of Goods

7.1 Armcor Air Solutions™ will not accept returns for credit without prior authorisation.

7.2 Any goods returned for credit will only be accepted if they are in the original packaging, in pristine order and condition and accompanied by documentation showing;

a. Customers Name, Address and Account Number

b. Copy of Original Invoice and Delivery Docket

c. Reason for Return

d. Our Authorisation Number

7.3 In the event that Armcor Air Solutions™ authorise the return of the goods, goods must be carried by our nominated carrier at the Customers expense.

7.4 All returned goods are subject to 10% restocking fee.

8. Withholding Supply

8.1 Armcor Air Solutions™ reserve the right, irrespective of whether or not an order has been accepted and without notice to the Customer, to withhold supply and Armcor Air Solutions™ will not be liable for any loss or damage resulting directly or indirectly where;

a. We have insufficient goods to fulfil the order

b. Goods ordered have been discontinued

c. We have determined, in our absolute discretion that credit should no longer be extended to the Customer.

9. Minimum Orders

9.1 Armcor Air Solutions™ reserves the right to specify the minimum order value which we shall accept from time to time and to impose a surcharge should you require delivery of goods having a value less than minimum order value.

10. Clerical Errors

10.1 Armcor Air Solutions™ reserve the right to correct clerical errors with notification.

11. Governing Law

11.1 The laws of the State of Victoria govern all trading.

11.2 The Customer agrees with Armcor Air Solutions™ to submit to the non-exclusive jurisdiction of the Courts of Victoria and the Federal Courts of Australia and agree that any legal proceedings may be heard in these courts.

Warranty Policy

For the SALE AND SUPPLY OF PRODUCTS from Armcor Air Solutions™ (ABN: 45 313 062 732)

1. Applicability

1.1 This warranty Policy applies to any Products sold and/or supplies by Armcor Air Solutions™ to a Purchaser and supersedes and terms and conditions of the Purchaser.

1.2 This Warranty Policy is also subject to the Terms and Conditions for the sale and supply of Products from Armcor Air Solutions™ (“Terms and Conditions”), a copy of which is available of the website www.armcor.com.au and forms part of any Quotation or Order Confirmation from, and any Contract with, Armcor Air Solutions™.

2. Definitions

2.1 “Contract” shall mean any and all agreements for the sale and/or supply of Product(s) from Armcor Air Solutions™.

2.2 “Parties” shall mean Armcor Air Solutions™ and the Purchaser jointly.

2.3 “Price” shall mean the price to be paid by the Purchaser for the Product(s) excluding Goods and Services Tax (GST)

2.4 “Product” shall mean the product(s) as set out in the Contract.

2.5 “Purchaser” shall mean any and all party / parties entering into a Contract with Armcor Air Solutions™ for the sale and/or supply of Product(s) by Armcor Air Solutions™.

3. Parts Warranty

3.1 Unless otherwise agreed in writing and subject to the terms and conditions of this Warranty Policy and the Terms and Conditions, Armcor Air Solutions™ warrants:

a. That the Product(s) are free of manufacturing defects in material and workmanship, and

b. That the Products will deliver the rated heating and cooling capacity specified in the Quotation and published technical specifications for such Product.

3.2 If during a period of 12 months from the date of delivery the Product(s) to the Purchaser (“Warranty Period”) and Product manufactured by Armcor Air Solutions™ is found upon inspection by Armcor Air Solutions™ to have proved defective in design, material or workmanship under normal use and service and when properly installed, connected and commissioned as per the installation manual and instructions, Armcor Air Solutions™ will supply and exchange or replacement Product or component part(s) (the rectification solution being the absolute discretion of Armcor Air Solutions™) free of charge to the Purchaser provided that the Purchaser has complied with these conditions of a warranty (“Warranty Conditions”) including those in clauses 5 and 6

3.3 The Warranty Period may be extended, if requested and confirmed in writing, so that the 12 month period commences upon commissioning of the Product(s) provided that:

a. The date of commissioning occurs within 3 months of delivery of the Product(s) and

b. A commissioning report which specifies the date of commissioning is delivered to Armcor Air Solutions™ within 21 days of commissioning.

3.4 Unless prior agreement is given by Armcor Air Solutions™ in writing, any cost or expense incurred by any person removing, replacing, refitting or rebuilding the replacement Product or component part(s) shall be borne by the Purchaser except where Labour warranty has been specifically agreed and included in the sale.

3.5 If the Purchaser does not make a warranty claim within the Warranty Period, even if the defect occurs during the Warranty Period, the Purchaser shall lose all benefit of any Parts Warranty or Labour Warranty.

4. Labour Warranty

4.1 Armcor Air Solutions™, at its absolute discretion, may offer a 12 month labour warranty (“Labour Warranty”) at an additional cost of 5% the Price plus GST subject to the Warranty Conditions and this clause 4.

4.2 The Labour Warranty must be agreed and purchases and paid for prior to and Labour Warranty claim being actioned.

4.3 In additional to the benefits given by the Parts Warranty in clause 3, the Labour Warranty shall entitle the Purchaser, during the Warranty Period, having Armcor Air Solutions™ provide the labour for installing any replacement Products or component part(s) supplied pursuant to the Parts Warranty

4.4 The Labour covered by the Labour Warranty shall be undertaken:

a. By Armcor Air Solutions™

b. By sub-contractors chosen and arranged by Armcor Air Solutions™; or

c. Subject to the prior approval of Armcor Air Solutions™, by the Purchaser or its agents or subcontractors, provided that in these circumstances labour shall be no more than $65.00 per hour and there shall be no charges for initial call out fees, quotations, travelling time, overtime, hire equipment or apprentice labour.

5. Warranty Conditions

Armcor Air Solutions™ obligation under and Parts Warranty or Labour Warranty will apply only if:

5.1 The full Price in additional to GST and any other cots and charges pursuant to the Contract and the Terms and Conditions must have been paid.

5.2 The Product(s) must be in its first installation.

5.3 The Product(s) must have been installed in compliance with all of the conditions specified in the installation manual and instruction supplied with the Product(s).

5.4 The Product(s) must be operated and services in strict accordance with the installation instructions, operation instructions, service instructions, industry standards and relevant Government and industry codes and regulations.

5.5 The Product(s) must not have been subject to misuse, negligence, damage or accident in transit where the customer is responsible for transport.

5.6 The Product(s) must not have been modified, altered or supplemented in any way whatsoever without prior written approval of such modifications alternations or supplements given by Armcor Air Solutions™.

5.7 No part of the Product(s) shall be considered defective due to compliance with information or instructions regarding the quality or use to the Product(s) given by someone other than Armcor Air Solutions™.

5.8 No part of the Product(s) shall be considered defective if it is properly characterised as a consumable or due to normal wear of deterioration.

5.9 Any identification or serial number on the Product(s) or the part(s) must not have been altered, defaced or removed.

5.10 The warranty is subject to inspection of the Product(s) or potentially defective parts of the Product(s) or potentially defective parts of the Product(s) by Armcor Air Solutions™; although Armcor Air Solutions™ may in its sole discretion, waive the requirement for inspection.

5.11 The source of all part(s) supplied by Armcor Air Solutions™ pursuant to the Parts Warranty shall be sourced from other suppliers, manufacturers or wholesalers.

5.12 Armcor Air Solutions™ shall not be liable for defects arising out of materials provided by or a design stipulated by the Purchaser, unless agreed to in the Quotation and Order Confirmation.

6. Making a Warranty Claim

6.1 In order for a Purchaser to make a claim under the Parts Warranty or the Labour Warranty, the Purchaser must provide to Armcor Air Solutions™:

a. A completed warranty card (supplied with the installation or instruction manual provided with the Product(s)) or a copy of the original invoice with matching serial numbers as proof of purchase;

b. Full written details of the defect, fault or problem and

c. If requested by Armcor Air Solutions™, photographs, servicing information, commissioning report, and/or delivery of the potentially defective part.

6.2 Any part(s) sent to Armcor Air Solutions™ must be accompanied by written details of the warranty claim and identification of the model and serial number of the Product(s)

6.3 In the event that Rancour Air Solutions provides a replacement part(s) and request return of a defective part(s), the defective part shall become the property of Armcor Air Solutions™ and if the defective part(s) is not returned within 14 days the Purchaser shall be liable for the full cost of the transport of the replacement part(s).

7. Limitation of Liability

7.1 Except as expressly provided in this Warranty Policy, Armcor Air Solutions™ shall have no obligations or liabilities whatsoever to the Purchaser in respect of the delivered Product(s) or any part thereof. Consequently, without limiting the generality above, Armcor Air Solutions™ shall under no circumstances be liable to the Purchaser for liquidated damages, loss of production, loss of profit, loss of revenue, loss of use, cost of capital, cost connected with interruption of operation or other consequential or indirect loss or damages arising out of or in connection with any Product(s) supplied.

7.2 At the expiration of the Warranty Period all liability whatsoever on the part of Armcor Air Solutions™ ceases.

8. Force Majeure

8.1 If Armcor Air Solutions™ fails to fulfil its obligations pursuant to the Warranty Policy due to industrial disputes or any other circumstances beyond its reasonable control, which Armcor Air Solutions™ could have reasonably expected or taken into account and which consequences Armcor Air Solutions™ could not reasonable have avoided or overcome (including but not limited to fire, flood, power blackout, earthquake, war or delays in deliveries by sub-contractors) it shall be regarded as a case for relief and Armcor Air Solutions™ will not be liable for any damages or any other relief or remedies.