How to fit your Front Carrier A
ÂŽ
Tools You will only need one tool for this very simple fitting: • 15mm spanner Note: This rack is not designed for quick-release wheels or bikes with Ahead stems.
1. Remove front carrier from packaging
2. With your bicycle on its kick stand, or propped up securely against a wall, remove the front wheel nuts with the 15mm spanner. Keep the washers on. Your carrier has holes at the bottom of each the leg. Slot these on to the wheel axle, on each side of the bike.
1.
2.
3. Replace the wheel nuts. Tighten firmly with the 15mm spanner.
3.
1.
5.
2.
4.
4. At the top of the carrier, there is a ‘c’ shaped hook. It has a wing nut on it. Using your fingers, loosen the wing nut and remove it. 5. Fit the ‘c’ shaped hook around the stem (above the headset). Replace the wing nut and tighten firmly with your fingers. 6. Your front carrier will fit like this. 7. You can use your carrier for a basket or bag. Some baskets must be secured with cable ties. Other baskets and bags can be attached using the spring or a bungee. Whatever you are carrying ALWAYS make sure it is attached securely: no wobbles, no dangles and no interfering with moving parts.
4.
6.
7. 6.
7.
Congratulations. You just fitted your front carrier! Share your photos @bobbinbicycles