Innovation
Simplicity is simply better Rotary Lobe Pumps Macerating Technology
Rotary Lobe Pumps
Multicrusher
|
Multichopper
|
Rotorrake
Bรถrger Rotary Lobe Pumps Construction, Drive and Assembly
6
7 1
2
2
4
2
5
3
Bรถrger Rotary Lobe Pumps are made of a small number of parts. The different sizes of the casings and rotors are manufactured in a single piece construction, quite different from the high number of components normally found in comparable pumps.The result is a robust and compact rotary lobe pump design, which is known for quiet, safe and
2
reliable operation, long operational life and for ease of maintenance. The replacement of wear parts can be managed, in-situ, by service personnel in the blink of an eye without the removal of pipe systems or drive units. Simplicity is one of Bรถrger's trademarks. Bรถrger rotary lobe pumps are universally mountable and are
suited for many different types of installation. For example, electric, combustion and hydraulic drives can be utilized. Complete mobile aggregates can be manufactured to customer specification and are finished in our own workshop.
Operating Principle Bรถrger Rotary Lobe Pumps are self priming, valveless positive displacement pumps. The synchronized counter-rotating rotors seal towards each other. Chambers are formed between the rotor vanes and the casing surrounding them. These chambers move from the suction to the pressure side creating a vacuum. The conveyed product in the chambers is displaced through the discharge-side casing opening. The flow direction is easily reversible by changing the direction of rotation. Pumps have a distinct advantage where a reverse flow is needed.
1
Quick-release cover
The door to the interior of the pump and quick access to all wetted parts.
2
Axial and radial casing protection
Casing liners are available in wear-resistant steel, stainless steel, plastic or ceramic.
3
Rotor
Coatings for the rotor are made of various elastomers, plastics, solid metal or ceramic-coated. The rotors are specially selected for each individual application. Thanks to the sophisticated modular system, nearly all rotors can be fitted into any Bรถrger Rotary Lobe Pump.
4
Shaft seals
Our three product lines Classic, Select and Protect offer a suitable shaft seal for every application. We also supply customized shaft seals for special applications (for example, packing).
5
Medium unwetted shaft
The carrier shafts of the Bรถrger Rotary Lobe Pumps do not come into contact with the pump medium due to its self-sealing design.
6
Quench and control chamber
The control liquid in the intermediate chamber of the pump chamber ensures a high level of safety and gear protection.
7
Pump Casing in block design
Pump Casing ductile iron, stainless steel, duplex and Hastelloy; with MIP cover for virtually unlimited service life.
8
Carrier and timing gear
The carrier and timing gear is housed in a single-piece casing with sturdy bearing and gear wheels. The gear wheels ensure an even, smooth operation, as well as long service life.
8
3
Worldwide unique: the significant rotor variety
Rotor Dual-lobe, linear · The Allrounder · entirely elastomer coated · for aggressive and abrasive fluids
Rotor Tri-lobe, screw profile · entirely elastomer coated · with non-wetted core · with low pulsation
Rotor Tri-lobe, screw profile · from hard metal or stainless steel · with low pulsation · insensitive to foreign bodies
Optimum Rotor* Dual-lobe, screw profile · large sealing area with effective scraping edge · for abrasive and aggressive fluids · almost pulsation-free and high pressure stability
Rotor* Tri-lobe, linear · with replaceable rotor tips · with long sealing line · for solids and debris containing fluids
Rotor* Tri-lobe, screw profile · with replaceable rotor tips · for solids and debris containing fluids · with low pulsation
Premium PFA Rotor* Dual-lobe, linear · particularly wide sealing area with effective scraping edge · Teflon-coated · with non-wetted core
Premium Rotor* Dual-lobe, linear · large sealing area and pressure stable · for high viscous, abrasive products · from hard metal or stainless steel *patented
Different rotary lobe types with various materials of construction such as elastomer, plastic or metal are used depending on the fluid characteristics. Viscous, abrasive and aggressive pumped media can be handled easily with the variable and modular rotor design capabilities.
4
Thanks to the special, patented construction, the robust rotor core and durable shaft remain nonwetted. We consider all factors when determining the selection of the best suited rotor for each individual application, therefore meeting the special demands of our customers.
In case of changing operating conditions, due to the modular construction different rotor designs can be retro-fitted to an existing pump unit.
MIP = Maintenance in Place
Both, repair- and downtime, cost money. Production and process time should not be lost due to maintenance. Following this basic principle, Börger has been constantly striving to perfect its rotary lobe pumps. The result is an extremely efficient, reliable and easy to maintain pump aggregate that is worldwide unmatched.
All replacement and wear parts are extremely durable, resilient and affordable. You won't be forced into any expensive maintenance contracts with Börger – simply carry out any maintenance and repairs yourself! The unique MIP property of our pumps makes this possible. MIP or Maintenance in Place means that all replaceable parts can be
easily installed and removed by maintenance personnel, in-situ, without having to remove any pipe or drive systems.
The quick-release cover enables easy access to the inner components of the pump. All wetted parts can be quickly maintained and replaced when necessary – without removal of pipe or drive system
5
What pump size would you like? Six series with 20 sizes
AL-series
PL-series
EL-series
All pump models are manufactured using single piece construction. That won't be copied easily. The AL, PL, CL, FL, EL and XL series allow for a rated capacity between 5 – 5,000 usgpm (1 – 1,000 m³/h). Whatever pump size is right for you depends on its intended purpose, installation location and the characteristics of the pumped fluid. Whatever you need, we'll give you thorough technical advice.
6
CL-series
FL-series
XL-series
When we select a rotary lobe pump model for you, we consider the large variety of different pump sizes and materials available, including the best suited shaft seal and drive selection, so that your customized pump is built for its intended use. The pump casing is constructed using grey cast iron as standard. It is given either an abrasive-resistant coating or is finished entirely in stainless or duplex steel for corrosive applications.
All elastomers can be supplied in an almost unlimited material range with various characteristics. Our performance driven, reliable and robust pumps benefit not only from the Maintenance in Place feature (MIP) but also from high efficiencies resulting in low energy consumption, reducing the life cycle costs to a minimum. All Börger Pumps are available in an ATEX variant.
Pump Output Q (usgpm) Q (m続/h)
5 1
50 10
500 100
5,000 m続/h 1,000 m続/h
AL 25 AL 50 AL 75 PL 100 PL 200 PL 300 PL 400 CL 260 CL 390 CL 520 FL 518 FL 776 FL 1036 EL 1000 EL 1550 EL 2250
XL 1760 XL 2650 XL 3530
n = 300 min-1 n = 450 min-1 p = max. 12 bar | 180 psi
EL 3050
7
Three Product Lines – Three Outstanding Solutions Börger has been supplying high-quality rotary lobe pumps for more than 25 years. From a variety of sizes, types and materials, the matching rotary lobe pump can be configured for each application. Three product lines are available with various shaft seals including many customizable features, all with standardized pump characteristics.
Select
Protect Protect
Classic
The Börger Classic Rotary Lobe Pump product line has been wellproven for many years and is the basic model of our rotary lobe pumps with a large-dimensioned, pressureless fluid-filled intermediate chamber.
Based on the advantages of the Classic Product Line with individually controllable, pressurized mechanical seals with single seal chambers.
The Product Line Protect with double acting mechanical seals is the perfect solution for high requirements with problematic medium. The gear assembly with open intermediate area towards the pump casing allows for fitting of double acting mechanical seals. With the pressurized buffer fluid between two mechanical seals, any penetration of conveying product in between the sliding surfaces is reliably avoided.
Being based on the same pump chamber, the Product Lines Classic, Select and Protect offer a high rotor and material availability.
8
Classic – Classically Good!
The low number and compact nature of the individual components will surprise anyone who disassembles a BĂśrger Rotary Lobe Pump. The different sizes of the casings and rotors are manufactured in a single piece construction, quite different from the high number of components normally found in comparable pumps. The results are robust and compact rotary lobe pumps, which are known for quiet, safe and reliable operation, long operational life and for ease of maintenance.
All replaceable parts can be easily installed and removed by maintenance personnel, in-situ. MIP = Maintenance in Place.
2)
1)
3)
Exclusive from BĂśrger: Unrivalled MIP-Design reduces life cycle cost and downtime.
1) Conveying Product 2) Quench fluid 3) Pump chamber
9
Select – The Perfect Selection! The Select Pump follows the base principle of the Classic Product Line. Between timing gear and pump casing, the mechanical shaft seals are individually pressurized.
The Select Product Line is particularly suitable for crystalline, toxic and sensitive fluids. Due to the pressurized area between the seals, medium is unable to penetrate in between the surfaces of the mechanical seal faces.
Additionally, the pumped fluid does not come into contact with the environment. Any seal leaks can be promptly detected and p revented by visual and sensory m onitoring. Since the shafts seals are individually pressurized, it is possible to monitor each seal assembly of the two shafts separately.
Different needs require different materials and dimensional features. Börger offers a wide material variety. The pump casings are available from cast iron up to duplex-stainless steel, the casing protection plates provide materials up to ceramic and the rotors include a wide range of geometries and materials (elastomer coated, PUR, PTFE up to stainless steel). Exclusive from Börger: Unrivalled MIP-Design reduces life cycle cost and downtime.
10
2) 1)
3)
Design of the Select Product Line shaft seal Due to the pressurized area between the seals, medium is unable to penetrate in between the surfaces of the 足mechanical seals. The medium does not come into contact with the atmosphere. Any heat development of the seal is transferred by the buffer fluid. All parts of the seals are accessible and replaceable via the pump chamber (MIP = Maintenance in Place).
1) Conveying Product 2) Buffer Fluid 3) Pump Chamber
Venting
The buffer fluid or the pressurized flushing liquid is fed in from the lowest point. This is made possible with the special intermediate plate. Vent or drain 足connections are located as highest points. Sight glasses (Level Control) with fittings and connections are available within our delivery program.
11
Protect – Double Acting, Double Se The professional among the Börger Rotary Lobe Pumps is the Protect Product Line which incorporates the highest degree of operational safety for the mechanical seals with problematic fluids. The timing gear with optimized axial tolerances is separated from the pump chamber. In between are two pressurized double-acting mechanical seals fitted. The pressurization can be achieved with a thermosyphon system.
The Protect pumps are particularly suitable for critical liquids (such as toxic or explosive pumped media), as well as highly abrasive conveying products. Protect pumps are also suitable for pumping latex, which often forms deposits between the seal faces causing possible leakage issues.
Different needs require different materials and dimensional features. Börger offers a wide material variety. The pump casings are available from cast iron up to duplex-stainless steel, the casing protection plates provide materials up to ceramic and the rotors include a wide range of geometries and materials (elastomer coated, PUR, PTFE up to stainless steel).
12
It is essential that the pressure level of the clean buffer fluid is kept higher than the maximum discharge pressure in the pump chamber. In this way the double-acting mechanical seals reliably prevent the pumped medium from leaking out of the pump chamber. The pressurized buffer fluid also prevents the conveying product from penetrating in between the seal faces.
Exclusive from Börger: Unrivalled MIP-Design reduces life cycle cost and downtime.
ecure, Double Protected! Design of the Double Acting Mechanical Seal
2)
1)
3)
1) Conveying Product 2) Buffer Fluid 3) Pump Chamber
Bรถrger Rotary Lobe Pump of the Protect Product Line with Thermosyphon System The buffer fluid of the thermosyphon system lubricates the seal faces and provides cooling or heating of the seal arrangement. The circulation of the pressurized buffer fluid is performed by the thermosyphon principle or by forced circulation. Auxiliary devices ensure for easy operation and increase the reliability.
13
We love challenges Extract constructive solutions Additionally, we are always exploring new markets and new technologies.
14
Börger Macerating Technology At a glance Multicrusher Twin-Shaft-Grinder
Performance data by series
· different sizes · flow rates up to 320 m³/h (5,300 l/min) · low-on space, compact design · degree of macerating variable thanks to choice of perforated disk and flow speed m³/h HAL
1
5
10
50
100
500
1000
HPL HCL HFL
Multichopper Perforated Disk Chopper
Performance data by series
· equipped with or without debris collector · flow rates up to 400 m³/h (6.650 l/min) · Design with or without debris collector
m³/h P 150
1
5
10
50
100
500
1000
P 300 P 500
Rotorrake Single-Shaft Macerator
Performance data by series
· different sizes · rated capacity up to 800 m³/h (13.300 l/min) · compact design · debris collector m³/h 1 RR 6000
5
10
50
100
500
1000
RR 9000
15
Börger Multicrusher Construction, Drive and Assembly
The Multicrusher incorporates the same unique advantages of the Börger MIP Design as the Rotary Lobe Pump: MIP (Maintenance In Place) allows the quick and convenient replacement of all wetted parts without removal of pipes, drives or other components of the macerating unit by your own staff. The unrivaled maintenance friendliness guarantees low life cycle costs and minimized downtime!
16
No matter if you integrate the Multicrusher in a pump operated system or you install it as an individual unit, the flexibility is superb! Because of the quick access to the rotating parts of the Multicrusher, the blade combinations, blade geometry and thickness can all be customized depending on the application and the particle size to be achieved.
The Multicrusher is a self-sufficient macerating unit with enormous “PullIn-Function”. The aggregate can be installed in line sufficiently flooded or on suction and discharge sides of pumping systems.
Convincing Features Macerating elements The individual blades are assembled on a heavy duty, hexagonal shaft sleeve. The blade configuration is positioned in place with one central bolt. Through the quickrelease cover all wetted parts can be exchanged in minimal time. Several blade designs are available. Shaft seal The unit is equipped with a robust mechanical seal. The integrated quench and control liquid filled intermediate chamber provides continuous mechanical seal lubrication and prohibits fluid penetration into the gear unit.
Flow direction The Börger Multicrusher is a symmetrical, reversible macerating machine. By turning the blades 180 degrees and by changing the rotation direction, the suction and discharge side of the macerating unit can be reversed.
Block construction The bolt connected grinder and gear casing are both designed as a compact one-piece construction. The Multicrusher, combined with a gear motor and connected through a flexible coupling on a common base frame, presents a compact macerating aggregate. Rotation speeds Since the Multicrusher is not constructed with an integrated gear reduction, a wide range of operating speeds and various aggregate designs are available. Low HP units are best suited for water like fluids and low operation speeds. Increased solids concentration and/or improved macerating results require higher speeds and torques. Bearing frame The gear assembly represents a cantilevered shaft design. The gear unit is a sealed component with robust gears and bearings. Special construction The twin shaft grinder incorporates a strong “Pull-In-Function”. Börger develops customized fluid / solids handling solutions with auger feed systems combined with macerating and pumping equipment.
Börger shows teeth to problem cases. The macerating results depend on a variety of variables, including the blade configuration, the blade thickness and teeth design as well as the rotation speeds. Nine blade configurations are currently available. The relative rotation speed between the two grinder shafts ensure an optimized macerating effect. Hard metal tool steel provides long lasting sharpness and cut performance.
Worldwide unique and exclusive from Börger: Unrivalled MIP-Design reduces life cycle cost and downtime.
17
Börger Multichopper Construction, Drive and Assembly
plus
pure
The Börger Multichopper incorporates advantageous technical and operational design features. Knife tension to the cutting plate (perforated disc) is adjustable from outside the unit. A central shaft clamp construction maintains the axially fixed blade alignment and tension to the reversible cutting plate. The shaft seal is supplied with the proven Börger mechanical seal with quench
and control. The Multichopper incorporates Börger’s well-known maintenance friendly design. All rotating parts can be accessed, maintained or replaced via the removable front access cover, fitted with an eyebolt clamped construction. With no requirement for special tools. The Börger Multichopper is available in two designs. The Multichopper plus is equipped with a debris collector
for solids which cannot be macerated, while the Multichopper pure is designed to have no cavities in which the medium can become entrapped. Hence the Multichopper pure is built without a debris collector. The Multichopper is available in grey cast iron and stainless steel designs. The Multichopper – designed for simple and effective operation.
MCA = Mechanical Cut Adjustment Automatic adjusting device ensures constant optimized cut performance Multichopper plus – in grey cast iron or stainless steel design, with large-volume debris collector Multichopper pure – in stainless steel design, without debris collector, ensuring no deposits
= ft“ “Li
At a glance:
No
(A)
- The MCA technology uses a clamp axle to hold the blades against the cutting plate with minimal preloading.
(A)
(B)
The MCA unit is an adjustment unit which works automatically. The rotating MCA cylinder (A), attached externally, works with a constant cutting load and pulls the blades onto the cutting plate with the minimum force necessary. Only a small amount of load is used so that the cutting blades are only lightly held against the cutting plate in the working position with low stress.
- The MCA unit is fitted externally, axial to the knife unit (B).
t“ jus “Ad
es =Y
When a clearance between the blades and cutting plates develops, the axial traction ensures that the cutting interplay between the blades and the cutting plate is always ideally set, guaranteeing that the Multichopper has an optimal cutting effect. The cutting preload is set completely independently. This technology is absolutely maintenance-free.
- The MCA unit only allows one direction of movement. The blades cannot be lifted from the cutting plate. - The knife unit, clamp axle and MCA form a patented unit which rotates as one.
Intelligent technology in the adjustment cylinder (MCA) prevents the blades from lifting and resetting. The adjustment unit is located externally. The entire internal macerating space of the Multichopper is not restricted by any adjustment devices. Here, the entire space is available for the medium to be chopped.
Direction of flow The direction of flow can be determined onsite due to reversible flange connections (Multichopper plus) or by rotating the casing by 180° (Multichopper pure).
Börger has razor sharp solutions! Single shaft grinder with central cutting plate and effective blades for solids reduction in liquid phases. The chopping result is mainly determined by the design of the cutting plate, the operating speed and the fluid velocity through the unit.
Unique in the world and exclusive from Börger: Börger Multichopper MIP-Design allows the quick and convenient maintenance or replacement of all wetted parts, without removal of pipes, drives or other components. By your own staff. Quick – Uncomplicated – Inexpensive
19
BĂśrger Rotorrake Construction, Drive and Assembly
The Rotorrake is a robust chopping unit using inline design. Knives and counter knives are pushed on to the carrier shaft alternatively. The counter knives are fixed stationary inside the casing. The rotating shaft is directly driven via the drive and bearing assembly. The Rotorrake with its rough macerating effect allows for high throughput capacities.
Solids laden fluid is fed through the Rotorrake. Separation of hard particles is achieved by knife rotation against fixed counter knives. Stones and debris drop into the debris collector. Reduce-able solids are chopped by further knife rotation against the fixed knives. Both Knives and counter knives are reversible and can be used from either side.
Rotorrake – designed for simple and effective operation.
Reversible Direction of Flow
The Rotorrake is designed modular and can be used for various solids-reducing duties with reversible operation.
Advantages · Throughput up to 800 m³/h (3,500 usgpm), depending on the model · Rotorrake – compact, space-saving, single shaft design · Variable flow direction – Adjustment by modification of stationary knifes fitting · Rotating shaft in oil filled bearing carrier · Equipped with our standard Börger mechanical seal - 1.000 times approved · Quench chamber between fluid and drive gear guarantees safety · Knifes and counter knifes can be used multiple times just by turning them
Drive varieties
with parallel geared electric motor
with hydraulic motor
with bearing carrier and bare shaft
21
Mobile Pumps Prepared for each application! Bรถrger Statement: We didn't invent the Rotary Lobe Pump; we made something special of it! Every mobile Bรถrger Rotary Lobe Pump is a customized solution, manufactured with high standards in our production facility in accordance to the specification of the customer.
22
»Control Technology ‘Made by Börger’ The control units and control panel technology are manufactured for pumps, macerators, etc. by Börger. This means that we can independently customize products to an even greater degree, in line with customer requirements.
23
Bรถrger GmbH
Bรถrger France S.A.R.L.
Bรถrger UK Limited
Borken-Weseke, Germany
Wittersheim, France
Staffordshire, United Kingdom
Phone +49 2862 91030
Phone +33 388 515468
Phone +44 1902 798977
www.boerger.com
www.borger.fr
www.boerger.com
info@boerger.com
info@borger.fr
uk@boerger.com
Bรถrger Benelux
Boerger Polska Sp. z o.o.
Boerger, LLC
Ootmarsum, Netherlands
Gliwice, Poland
Chanhassen, USA
Phone +31 541 293687
Phone +48 32 3356094
Phone +1 612 435 7300
www.boerger-pumps.nl
www.boerger.pl
www.boerger.com
info@boerger-pumps.nl
info@boerger.pl
america@boerger.com
Boerger Pumps Asia Pte Ltd
Boerger China
Boerger Pumps Asia Pte Ltd
Singapore
Pudong, Shanghai, China
Gurgaon, Haryana, India
Phone +65 6562 9540
Phone +86 21 6160 4075
Phone +91 124 463 6060
www.boerger.com
www.boerger.com.cn
www.boerger.com
asia@boerger.com
shanghai@boerger.com
india@boerger.com
www.boerger.com
US_P23_GP_0814
Worldwide