Urban Brochure English by Bolduc

Commercial and institutional products

www.bolduc.us www.bolduc.ca

You will find Bolduc’s corporate struc ture, products and the research and development services that guarantee constant unparalleled quality. Bolduc’s timeless products will meet your stan dards of beauty, durability and excel lence to make your projects stand out. Enter Bolduc’s world and gain inspira tion from our quality products.

URBAN BOLDUC Landscapes and Projects Cover project: Borealis Museum, Trois-Rivières

For over 55 years, Bolduc has been creating trendsetting concrete products in styles that harmonize perfectly with the environment. Inspired by nature, Bolduc deve lops innovative, elegant and highly resistant pavers, wallstones, steps, slabs and borders for residential, urban and institutional markets.

Quartier des spectacles Montreal

Beauty and harmony!

Grenart™ Finish

These pavers blend in perfectly with surrounding architecture and urban landscaping.

The Grenart finish is a treatment that transforms the surface to a warm granular stone texture.

• Specially designed for landscaping parks, walkways,driveways, streets,parking areas, etc. • Wide selection of bright colors. • Available in a Grenart or regular finish. • Many patterns available. • Versatile manual or mechanical installation. • 4 inches (10 cm) thick. • Rugged texture and chamfers provide a nonskid surface. • Withstand freezing and thawing cycles, abrasion and compressive stresses. • 4 LEED certified colors.

Geometric characteristics: Nominal dimensions (in./cm)

Weight of pavers: 48,1 lb/sq. ft. (235 kg/m2) Physical characteristics †: Compressive strength**: 7250 Psi (50 Mpa)

4 x 4 x 17 3/4 in. (10 x 10 x 45 cm) 4 x 5 7/8 x 17 3/4 in. (10 x 15 x 45 cm) 4 x 5 7/8 x 11 13/16 in. (10 x 15 x 30 cm) 4 x 11 13/16 x 11 13/16 in. (10 x 30 x 30 cm) 4 x 4 x 23 5/8 in. (10 x 10 x 60 cm)* 4 x 7 7/8 x 23 5/8 in. (10 x 20 x 60 cm) 4 x 11 13/16 x 23 5/8 in. (10 x 30 x 60 cm) 4 x 23 5/8 x 23 5/8 in. (10 x 60 x 60 cm) 4 x 19 5/8 x 19 5/8 in. (10 x 50 x 50 cm)

Durability to freeze-thaw cycles with utilisation in saline solution**:

* F or this model (4 x 4 x 23 5/8 in.) the capacity of the vibrating plate used to settle the paving stones into the installation bed and ensure penetration of the joint filler must not exceed 2,200 kg (4,800 lb.).

5% maximum

Dimensional tolerances : †

The permitted dimensional tolerances prescribed by in the CSA A231.2 are the following:

Maximum loss of initial weight in saline solution (NaCl 3%): • 0.74oz / pi2 (225 g/m2) after 28 cycles • 1.64oz / pi2 (500 g/m2) after 49 cycles

Water absorption:

Installation : Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

Lenght : -1/32 in. to + 5/64 in. (-1 mm to +2 mm) Width : -1/32 in. to + 5/64 in. (-1 mm to +2 mm) height : ± 1/8 in.(± 3 mm)

Leed Certified Pavers Leed-certified solar reflectance index (Granite Gray, Ivory,Opal White and Sahara Beige)

† Copies of lab tests are available upon request. Tests performed as per CSA A231.2

Avenue®

Institutional Paver

Colors:

RTC BUS TERMINAL

Gray

Sahara Beige

Burned Beige

Sandhill Beige

Salmon

Brown

Clay Brown

Red

Burgundy

Caledonia Pink

Smoke Gray

Granite Gray

Ivory

Opal White

Anthracite

Les Galeries de la Capitale, Quebec We recommand that you use actual samples to make your final choice. URBAN BOLDUC 4-5

Beauty and stability!

Grenart™ Finish

Weight of pavers:

These pavers blend in perfectly with surrounding architecture and urban landscaping.

The Grenart finish is a treatment that transforms the sur face to a warm granular stone texture.

48,1 lb/sq. ft. (235 kg/m2)

• Specially designed for streets, intersec tions, crosswalks, parking lots, storage areas, parks, etc. • Wide selection of bright colors • Available in a Grenart or regular finish • 4 inches (10 cm) thick • Horizontal and vertical autoblocking system provides optimal surface stability • Provide greater flexural strength • Distribute loads over surrounding pavers • Eliminate rutting problems • Rugged texture and chamfers provide a nonskid surface • Withstand freezing and thawing cycles, abrasion and compressive stresses • “Runner” and “Herringbone” Patterns

Geometric characteristics: Nominal dimensions (in./cm) 4 x 5 7/8 x 11 13/16 in. (10 x 15 x 30 cm)

Dimensional tolerances † : The permitted dimensional tolerances prescribed by in the CSA A231.2 are the following: Lenght : - 1/32 in. to + 5/64 in. (-1 mm to +2 mm) Width: - 1/32 in. to + 5/64 in. (-1 mm to +2 mm) height : ± 1/8 in.(± 3 mm)

Physical characteristics † Compressive strength**: 50 MPa (7250 psi)

Durability to freeze-thaw cycles with utilisation in saline solution**: Maximum loss of initial weight in saline solution (NaCl 3%): • 0.74oz / pi2 (225 g/m2) after 28 cycles • 1.64oz / pi2 (500 g/m2) after 49 cycles

Water absorption: 5% maximum

Installation : Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

• 4 LEED certified colors.

† Copies of lab tests are available upon request. ** Tests performed as per CSA A231.2

Leed Certified Pavers Leed-certified solar reflectance index (Granite Gray, Ivory, Opal White and Sahara Beige)

Avenue® Autoblocking

Institutional Paver

Colors:

du passage Street

Gray

Sahara Beige

Burned Beige

Sandhill Beige

Salmon

Brown

Clay Brown

Red

Burgundy

Caledonia Pink

Smoke Gray

Granite Gray

Ivory

Opal White

Anthracite

LĂŠvis

We recommand that you use actual samples to make your final choice. URBAN BOLDUC 6-7

Beauty and flexibility!

Variation in paver length:

Physical characteristics †

The aged look and color scheme of these pavers will give urban environments European flair.

Module 1

Compressive strength**:

Height x Width x Length 4 x 415/16 x 77/8 in. (10 x 12,5 x 20 cm)

7250 Psi (50 Mpa)

• Specially designed for streets, intersec tions, crosswalks, parking lots, storage areas, parks, etc. • Choice of 4 classic colors • Antique finish • Extremely quick to install • 4 inches (10 cm) thick • Comes in three sizes, considerably reducing the need for cutting • Withstand freezing and thawing cycles, abrasion and compressive stresses • “Runner” Pattern

4 x 415/16 x 97/8 in. (10 x 12,5 x 25 cm) 4 x 415/16 x 1113/16 in. (10 x 12,5 x 30 cm) Piece Count 5,09 / ft2

(54,8 / m2)

Weight of pavers: 48.1 lbs/sq. ft. (235 kg/m2)

Water absorption: 5% maximum

Installation : Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

† Copies of lab tests are available upon request. ** Tests according to CSA A231-2

Tri Appia™

Institutional Paver

Colors:

Limestone Gray

Sandstone Beige

Terracotta Brown

Garnet Red

Courthouse Joliette

We recommand that you use actual samples to make your final choice. URBAN BOLDUC 8-9

Beauty and simplicity!

Geometric characteristics:

Physical characteristics* :

The aged look and color scheme of these pavers will give urban environments European flair.

Nominal dimensions (in./cm)

Compressive strength**:

4 x 5 x8 in. (10 x14 x 22 cm)

7250 Psi (50 Mpa)

Edge paver (one straight side) and half-paver also available

Durability to freeze-thaw cycles with utilisation in saline solution**:

Dimensional tolerances :

Maximum loss of initial weight in saline solution (NaCl 3%):

• Specially designed for streets, intersec tions, crosswalks, parking lots, storage areas, parks, etc. • Choice of four attractive colors • Extremely quick to install • 4 inches (10 cm) thick • Autoblocking system provides optimal surface stability • Provide greater flexural strength • Distribute loads over surrounding pavers • Eliminate rutting problems • Withstand freezing and thawing cycles, abrasion and compressive stresses

1/2

5/8

The permitted dimensional tolerances prescribed by in the CSA A231.2 are the following: Lenght : - 1/32 in. to + 5/64 in. (-1 mm to +2 mm) Width: - 1/32 in. to + 5/64 in. (-1 mm to +2 mm) height : ± 1/8 in.(± 3 mm)

Weight of pavers: 48.1 lbs/sq. ft. (235 kg/m2)

• 0.74oz / pi2 (225 g/m2) after 28 cycles • 1.64oz / pi2 (500 g/m2) after 49 cycles

Water absorption: 5% maximum

Installation : Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

• “Runner” Pattern

* Copies of lab tests are available upon request. ** Tests according to CSA A231-2

Appialock®

Interlocking Institutional Paver

Colors:

Limestone Gray

Sandstone Beige

Terracotta Brown

Garnet Red

Downtown Sainte-Marie-de-Beauce

We recommand that you use actual samples to make your final choice. URBAN BOLDUC 10-11

Beauty and Tradition!

Geometric characteristics:

Physical characteristics †

Our paver evokes the beauty of the public places of the past. Its natural old cobble stone appearance and organic shapes inspire an atmosphere of serenity and nobility.

Module 1

Compressive strength**:

Height x Width x Length 3 1/8 x 3 1/8 to 4 3/4 x 4 3/4 to 9 1/2 in. (8 x 8 to 12 x 12 to 24 cm)

50 MPa (7250 psi)

• Selection of four rich colors • Delicate variations in hues inspired by nature • Antique and regular finishes • Residential or commercial use • Blend well with our wallstones Appala chian and Laurentian Stones • Withstand freezing and thawing cycles, abrasion and compressive stresses

Module 2

Height x Width x Length 3 1/8 x 6 1/4 to 8 5/8 x 6 1/4 to 11 in. (8 x 16 to 22 x 16 to 28 cm) Note : The Via Appia 80 paver is available in antique finish (see illustration) and regular. Paver 1 to 4 are shown below. Other sizes are available. Pavers for each module are in their respective cubes. A cube contains different quantities of each type of paver.

Weight of pavers: 38 lbs/sq.ft. (183 kg/sq.m)

Durability to freeze-thaw cycles with utilisation in saline solution**: Maximum loss from initial dry mass in a saline solution (3% NaCl): • 0.74oz/ft2 (225 g/m2) after 28 cycles • 1.64oz/ft2 (500 g/m2) after 49 cycles

Water absorption: 5% maximum

Modular along a 4 ft (1.2 metre) width Installation : Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

† Copies of lab tests are available upon request. ** Tested as per CSA A231.2

Via Appia™ 80

Urban paver

Colors:

Limestone Gray

Sandstone Beige

Terracotta Brown

Garnet Red

manoir richelieu GOLF club La Malbaie

We recommand that you use actual samples to make your final choice. URBAN BOLDUC 12-13

Classicism and elegance!

Grenart™ Finish

Weight of pavers:

These pavers blend in perfectly with surrounding architecture.

The Grenart finish is a treatment that transforms the sur face to a warm granular stone texture.

38 lbs/sq. ft. (183 kg/m2)

• Wide selection of bright colors. • Available in a Grenart or regular finish.

Geometric characteristics:

• 3 1/8 inches (8 cm) thick.

Nominal dimensions (in./cm)

• Rugged texture and chamfers provide a nonskid surface.

3 1/8 x 9 13/16 x 9 13/16 in. (8 x 25 x 25 cm)

• Withstand freezing and thawing cycles, abrasion and compressive stresses. • 4 LEED certified colors.

Dimensional tolerances : The permitted dimensional tolerances prescribed by in the CSA A231.2 are the following: Lenght : -1/32 in. to + 5/64 in. (-1 mm to +2 mm) Width : -1/32 in. to + 5/64 in. (-1 mm to +2 mm) height : ± 1/8 in.(± 3 mm)

Physical characteristics: Compressive strength* : 7250 Psi (50 Mpa)

Durability to freez-thaw cycles with utilisation in saline solution* : Maximum loss of initial weight in saline solution (NaCl 3%): • 0.74oz / sq.ft. (225 g/sq.m) after 28 cycles • 1.64oz / sq.ft. (500 g/sq.m) after 49 cycles

Water absorption: 5% maximum

Installation : Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

* Tests performed as per CSA A231.2

Leed Certified Pavers Leed-certified solar reflectance index (Granite Gray, Ivory, Opal White and Sahara Beige)

Citadin®

Urban Paver

Colors:

The wind rose

Gray

Sahara Beige

Burned Beige

Sandhill Beige

Salmon

Brown

Clay Brown

Red

Burgundy

Caledonia Pink

Smoke Gray

Granite Gray

Ivory

Opal White

Anthracite

Lebel ISLAND, Repentigny We recommand that you use actual samples to make your final choice. URBAN BOLDUC 14-15

Classicism and elegance!

Geometric characteristics:

Weight of pavers:

With its well-defined plane surfaces, this square-shaped paver fits well with contem porary, refined decors.

Nominal dimensions (in./cm)

38 lbs/sq. ft. (183 kg/m2)

3 1/8 x 6 3/8 x 12 13/16 in. (8 x 16,3 x 32,5 cm) 3 1/8 x 12 13/16 x 12 13/16 in. (8 x 32,5 x 32,5 cm) 3 1/8 x 12 13/16 x 19 3/16 in. (8 x 32,5 x 48,8 cm)

Physical characteristics:

• 3 1/8 inches (8 cm) thick. • Available in a Regular finish. • Choice of 4 colors.

Dimensional tolerances :

• 3 different sizes for a greater variety of patterns.

The permitted dimensional tolerances prescribed by in the CSA A231.2 are the following:

• 1 LEED certified color.

Lenght : -1/32 in. to + 5/64 in. (-1 mm to +2 mm) Width : -1/32 in. to + 5/64 in. (-1 mm to +2 mm) height : ± 1/8 in.(± 3 mm)

Compressive strength* : 7250 Psi (50 Mpa)

Water absorption: 5% maximum

Installation : Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

* Tests performed as per CSA A231.2

Leed Certified Pavers Leed-certified solar reflectance index (Ivory)

Citadin® Modular

Urban Paver

Colors:

Gray

Granite Gray

Anthracite

Ivory

Note: Other colors are available (minimum quantity required). For more information, please contact our representative.

We recommand that you use actual samples to make your final choice. URBAN BOLDUC 16-17

Beauty and Simplicity!

Grenart® Finish

Weight of pavers:

This classic paver elegantly strides through the years with elegance.

The Grenart finish is a treatment that transforms the sur face to a warm granular stone texture.

38 lbs/sq.ft. (183 kg/sq.m)

• Selection of many sparkling colors • Grenart or regular finish

Geometric characteristics:

• 3 1/8 in. (8 cm) thick

Nominal dimensions (in./cm)

• Withstand freezing and thawing cycles, abrasion and compressive stresses

3 1/8 x 4 1/4 x 8 1/2 in. (8 x 10,8 x 21,6 cm)

• Runner, herringbone and basket weave laying patterns

Physical characteristics: Compressive strength* : 7250 Psi (50 Mpa)

Water absorption: 5% maximum

Installation : Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

* Tests performed as per CSA A231.2

Classic 80 MC

Urban Paver

Colors:

Gray

Charcoal

Burgundy and Charcoal

Red and Charcoal

Mountsaint-louis CollEge Montreal

We recommand that you use actual samples to make your final choice. URBAN BOLDUC 18-19

Classicism and elegance!

Grenart® Finish

Weight of pavers:

With its well-defined plane surfaces, this square-shaped paver fits well with contemporary, refined decors.

The Grenart finish is a treatment that transforms the sur face to a warm granular stone texture.

30,5 lbs/sq.ft. (149 kg/m2)

• Selection of many sparkling colors

Geometric characteristics:

Compressive strength* :

• Grenart finish

Nominal dimensions (in./cm)

• 2 1/2 in. (6,5 cm) thick

Pavers

• Withstand freezing and thawing cycles, abrasion and compressive stresses.

21/2 x 315/16 x 77/8 in. (6,5 x 10 x 20 cm) 21/2 x 77/8 x 77/8 in. (6,5 x 20 x 20 cm) 21/2 x 1113/16 x 1113/16 in. (6,5 x 30 x 30 cm)

• 2 LEED certified colors.

Slabs 21/2 x 77/8 x 153/4 in. (6,5 x 20 x 40 cm) 21/2 x 153/4 x 153/4 in. (6,5 x 40 x 40 cm) 21/2 x 153/4 x 235/8 in. (6,5 x 40 x 60 cm) 21/2 x 235/8 x 235/8 in. (6,5 x 60 x 60 cm)

Dimensional tolerances : The permitted dimensional tolerances prescribed by in the CSA A231.1 and CSA A231.2 are the following: Lenght : -1/32 in. to + 5/64 in. (-1 mm to +2 mm) Width : -1/32 in. to + 5/64 in. (-1 mm to +2 mm)

Physical characteristics: Pavers: 7250 Psi (50 Mpa) Slabs: 653 Psi (4,5 Mpa)

Water absorption: 5% maximum

Installation : Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

Height : ± 1/8 in.(± 3 mm)

* Tests performed as per CSA A231.1 and CSA A231.2

Leed Certified Pavers Leed-certified solar reflectance index (Granite Gray and Ivory)

Prestige™

Urban Paver and Slab

Colors:

Rooftop Terrace, La Capitale Building, LEED Project Quebec City

Ivory

Gray

Granite Gray

Anthracite

We recommand that you use actual samples to make your final choice. URBAN BOLDUC 20-21

Classicism and elegance!

Geometric characteristics:

Weight of pavers:

With its well-defined plane surfaces, this square-shaped paver fits well with contemporary, refined decors.

Nominal dimensions (in./cm)

28 lbs / sq.ft. (138 kg/m2)

Module 1

• Regular finish

23/8 x 31/8 x 61/4 in. (6 x 8 x 16 cm) 23/8 x 61/4 x 61/4 in. (6 x 16 x 16 cm) 23/8 x 61/4 x 91/2 in. (6 x 16 x 24 cm)

• 2 3/8 in. (6 cm) thick

Module 2

• Withstand freezing and thawing cycles, abrasion and compressive stresses.

23/8 x 91/2 x 91/2 in. (6 x 24 x 24 cm)

• Selection of many sparkling colors

Module 3 23/8 x 91/2 x 125/8 in. (6 x 24 x 32 cm) 23/8 x 125/8 x 125/8 in. (6 x 32 x 32 cm)

Physical characteristics: Compressive strength* : 7250 Psi (50 Mpa)

Water absorption: 5% maximum

Installation : Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

* Tests performed as per CSA A231.2

Note: See all 2 3/8 in. pavers on our price list

Manoir® Modular Urban Paver

Colors:

Chameleon Gray

Chameleon Beige

Chameleon Chestnut Chameleon Red

TIMEs Hotel Sherbrooke

We recommand that you use actual samples to make your final choice. URBAN BOLDUC 22-23

Permeable Pavers

Geometric characteristics:

Physical characteristics †

When installed on an open-graded stone foundation, Bolduc’s permeable pavers form a temporary storage system for surface runoff. This system can replace traditional impermeable pavements to control or re duce water surges from rushing into storm sewers, reduce the need for temporary water storage systems and improve the quality of runoff water returning to the environment.

Opus

Compressive strength**:

This returns rainwater to the water table reduces the amount of pollutants and sedi ment washed into waterways, a significant environmental benefit. The USEPA (United States Environmental Protection Agency) recognizes permeable pavers as one of the best surface water management practices

Height x Width x Length 2 3/8 x 3 15/16 x 7 7/8 in. (6 x 10 x 20 cm)

7250 psi (50 MPa)

Via Appia 60 Height x Width x Length 2 3/8 x 3 1/8 to 7 x 4 3/4 to 9 1/2 in. (6 x 8 to 18 x 12 to 24 cm)

Via Appia 80 Module 1

Durability to freeze-thaw cycles with utilisation in saline solution**: Maximum loss of initial weight in saline solution (NaCl 3%): • 0.74oz / sq.ft. (225 g/sq.m) after 28 cycles

Height x Width x Length 3 1/8, 4, 4 3/4 x 4 3/4 to 9 1/2 in. (8, 10, 12 x 12 to 24 cm)

• 1.64oz / sq.ft. (500 g/sq.m) after 49 cycles

Dimensional tolerances :

5% maximum

The permitted dimensional tolerances prescribed by in the CSA A231.2 are the following:

Installation :

Lenght : -1/32 in. to + 5/64 in. (-1 mm to +2 mm)

Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

†

Width : -1/32 in. to + 5/64 in. (-1 mm to +2 mm) height : ± 1/8 in.(± 3 mm)

Water absorption:

† Copies of lab tests are available upon request. ** Tested under CSA A231.2

Permeable Pavers Permeable pavers are regarded as one of the best ways to manage surface water.

Opus

™

Urban Paver

Via Appia

™

60 and 80 module1 Urban Paver

Colors: Opus

Sandy Gray

OPUs

Anthracite Gray

Sandhill Beige

Permeable layout

Via Appia 60 and 80 Module 1

Limestone Gray

Sandstone Beige

Terracotta Brown

Garnet Red

Via appia Permeable layout We recommand that you use actual samples to make your final choice. URBAN BOLDUC 24-25

Elegance and Performance

Geometric characteristics:

Physical characteristics:

A wall with an antique look combining beau ty and efficiency.

Nominal dimensions (in./cm)

Compressive strength :

8 x 11 x 18 in. (20,3 x 27,9 x 45,7 cm) 8 x 11 x 11 in. (20,3 x 27,9 x 27,9 cm) 8 x 11 x 7 in. (20,3 x 27,9 x 17,8 cm)

5075 psi (35 MPa)

• Choice of two shaded colors • Antique finish • Three different lengths • One corner block

Corner Block 8 x 9 x 18 in. (20,3 x 22,9 x 45,7 cm)

• Straight wall (0,5 deg) or inclined wall (4,5 deg) using mechanical connectors orientation

Dimensional tolerances :

• Specially adapted geogrid reinforcement available for structural/high wall applica tion

Length: ±1/4 in (±5 mm)

Allowable dimensional tolerances are as follows: Depth: ±1/4 in (±5 mm) Height: ±1/16 in (±2 mm)

Freeze - Thaw 1,97 oz/sq.ft (600 g/sq.m)

Unreinforced maximum height (with embedment) : 4 ft. (1,2 m) Use Tensar geogrid reinforcement for wall height from 4 ft to 30 ft. Contact Bolduc’s technical staff for design and/or technical information.

Installation : Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

Mesa® Antique

Colors:

Gray and Charcoal

Beige and Charcoal

Vachon boulevard Sainte-Marie, Beauce

We recommand that you use actual samples to make your final choice. URBAN BOLDUC 26-27

Performance and esthetics:

Geometric characteristics:

Physical characteristics:

The Mesa system provides a superior eco nomical solution for all your retaining wall needs. Mesa’s wall structure is buttressed by a mechanical connection between the side of the wall and the Tensar geogrid re inforcement. These walls have the esthetic look demanded by architects, the efficiency of installation wanted by owners, and the reliability sought after by engineers. Mesa’s structural walls, terraced gardens, rounded walls with steps blend in effortlessly with the natural environment of any site.

Nominal dimensions (in./cm)

Compressive strength :

Straight Face Block 8 x 11 x 18 in. (20,3 x 27,9 x 45,7 cm)

5075 psi (35 MPa)

Corner Block 8 x 9 x 18 in. (20,3 x 22,9 x 45,7 cm) Straight Coping Stone 4 x 11 x 18 in. (10,2 x 27,9 x 45,7 cm)

Freeze - Thaw 1,97 oz/sq.ft. (600 g/sq.m)

Unreinforced maximum height (with embedment) : 4 ft. (1,2 m)

Radius Face block 8 x 11 x 18 in. (20,3 x 27,9 x 45,7 cm)

Use Tensar geogrid reinforcement for wall height from 4 ft to 30 ft.

Raius Coping Block 4 x 11 x 18 in. (10,2 x 27,9 x 45,7 cm)

Contact Bolduc’s technical staff for design and/or technical information.

Straight smooth face 8 x 11 x 18 in. (20,3 x 27,9 x 45,7 cm)

Installation :

Straight smooth face chamfer 8 x 11 x 18 in. (20,3 x 27,9 x 45,7 cm)

Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

Dimensional tolerances : Allowable dimensional tolerances are as follows: Length: ±1/4 in (±5 mm) Depth: ±1/4 in (±5 mm) Height: ±1/16 in (±2 mm)

Mesa® System

Color:

Smoked Gray

We recommand that you use actual samples to make your final choice.

Highway ramp

Airlie Road, Mercier Bridge Exit Montreal We recommand that you use actual samples to make your final choice. URBAN BOLDUC 28-29

Bolduc’s prefabricated concrete curbs meet the most exacting government standards. They are ideal for marking the edges of roads, public car parks and urban landscapes.

Geometric characteristics:

Physical characteristics* :

Nominal dimensions (in./cm)

Compressive strength :

1. 12 x 6 x 47 in. (30 x 15 x 120 cm)

> 6525 psi (45 MPa)

These prefabricated curbs come in 1 or 1.2-meter sections and can easily be re placed.

2. 8 x 6 x 39 3/8 in. (20 x 15 x 100 cm) 3. 8-12 x 6 x 39 3/8 in. (20-30 x 15 x 100 cm)

Loss of mass due to chipping after 50 freeze-thaw cycles:

4. 12 x 6 x 39 3/8 in. (30 x 15 x 100 cm)

< 0,80 kg/m2

5. 12 x 6 x 39 in. (30 x 15 x 100 cm) 6. 12 x 6 x 39 3/8 in. (30 x 15 x 100 cm)

Relative dynamic elasticity after 500 freeze-thaw cycles:

7. 12 x 6 x 39 3/8 in. (30 x 15 x 100 cm)

> 60 %

8. 12 x 6 x 39 3/8 in. (30 x 15 x 100 cm)

Flexural resistance:

1/4

3/8

9. 12 x 6 x 39 3/8 in. (30 x 15 x 100 cm) 10. 12 x 6 x 12 in. (30 x 15 x 30 cm)

> 4,5 MPa

Water absorption:

Dimensional tolerances :

< 5 %

These curbs meet all the dimensional requirements of the NQ 2624-210 Standard. The allowable dimensional tolerances set out in the Standard are for ±5 mm for all sizes except rounded units: their tolerance is ±2 mm.

Installation : Refer to the technical service or to Bolduc’s website at www.bolduc.ca to obtain the model specification, installation guide or any other technical information.

Colors: Gray is standard but curbs can be made in other colors on request.

* As per NQ 2624-210

Gray

1. Upraised A-1E

2. Screeded B-1E

3. Transition A-B-1E

4. Radius 2.05 ft (0,625m) 5. Radius 4.10 ft (1,25m)

6. Radius 8.20 ft (2,5m)

7. Radius 16.40 ft (5 m)

8. Radius 24.61 ft (7,5m)

9. Radius 32.81 ft (10 m)

5. Monolithic corner (interior and exterior)

Curbs

Bolduc walks you through all stages of your projects so that you can complete them without a hitch. We guarantee that you are using the best standard-compli ant materials on the market. Our goal is to offer the most reliable, toughest and most homogeneous products available. Our lead ing edge equipment guarantees products of unparalleled quality. You will find the best technical support possible on our web site www.bolduc.ca. You can also download the following docu ments: • Product technical specifications • Ribbed edge motifs • Master proposals • “Leed” specifications for our environmental products Our engineering service can address all your needs. Give them a call!

Stands the test of time! Delta hotel Quebec City

Urban BOLDUC 30-31

1358, 2nd Street, Industrial Park, Sainte-Marie, Beauce, Québec, Canada G6E 1G8 Sainte-Marie : Canada : USA : Fax : www.bolduc.us www.bolduc.ca info@bolduc.ca

Public square Joliette

(418) 387-2634 1-800-463-8966 1-800-603-5567 (418) 387-6438