Attaching Poly-Combo

Connec@ng the Keypad to the Poly-­‐Lock for the Poly-­‐Combo

The PCB (the green plate with the connectors) is carefully removed from the black bu>om plate

When the Poly-­‐Combo is a>ached to the door:

The cable is pushed through the hole in the black bu>om plate.

Connec@ng the Keypad to the Poly-­‐Lock for the Poly-­‐Combo

The cable is a>ached like this

Slide the PCB carefully back into place, as when you received the Poly-­‐Combo

Connec@ng the Keypad to the Poly-­‐Lock for the Poly-­‐Combo

When a>ached the red markings on the cable and the connector should be poin@ng the same direc@on

Before you push the cable into place, the small brown “flaps” on the connector are Released.

Now you are able to push the cable into Posi@on.

Push the two brown “Flaps” back to lock the cable into place in the connector.