Programming and setting up the Poly

Programming and setting up the Poly-Combo without a gateway The Poly-Combo has a default master pin number 9889 To change any pin numbers you will have to change the master pin number.

To make a new master pin number press: Open – Open – Master pin number (first time it is 9889) – Open – New master pin number – Open Check if the pin number works, other do the process again Now you are able to change and make new pin numbers.

The Keypad can hold up to 99 user codes, from 1-99 The pin numbers can be 4-10 digits You can administrate this directly from the Keypad or from your gateway To make a new pin number: Lock – Lock – Master pin – Lock – place for new pin (1-99) – Lock – new pin – Open Delete Pin: Open – Open – Master pin – Lock – Place of pin (1-99) – Open Security: If a wrong pin number in pressed 5 times the keypad locks.

Meaning that you are not able to use the keypad for 5 minutes afterwards.

Deactivating within the 5 minute delay: Open – Lock – Master pin – Open To put the keypad back to factory default: Lock – Lock – Master pin – Open For more instruction, look at the user guide for Poly-Lock and Poly-Pad