Z-WAVE REMOTE / RECEIVER
INCLUDING THE SHUTTLE IN A Z-WAVE NETWORK*:
select channel
press include with pin, green led will light up
activate channel
press button on receiver
press stop to finish
EXCLUDING THE SHUTTLE FROM A Z-WAVE NETWORK*:
press include/exclude button ~6sec.
red led will light up
press button on receiver
green led will blink twice
COPY UNIQUE REMOTE ADDRESS TO 2ND REMOTE*:
remote1
press include of 1st remote with a pin
remote 2
press open and stop of 2nd remote simultaneous
led 1 to 5 will blink fast, address of remote1 is now copied to remote 2
* Keep the remote close to the receiver/2nd remote (max 0,5 mtr). In case of a different remote/receiver, consult the corresponding manual. To reset a (second) copied remote to its origional unique address, press and hold the SELECT ▲ and ▼ buttons simultaneously for ~5 seconds until all 7 leds light up.
02/2011 WDOC ZWAVE
www.forestgroup.nl
1/1