Specialist Catalogue by Birchwood Price Tools

2015/16

Introduction

Contents

Battery Charging Unit

Gas Cylinder Cages

BPT Site Equipment

Roofing Tools

Sprayers

Pump Solutions

Skip Ramp / Barrow

Transformers & Power Splitters

Damp Proofing

07 RCD Plugs & Sockets

Manual Handling

Tile Cutters

Welcome to the 2015/16

Specialist Equipment Directory This is the place where you’ll find those unique, hard-to-find tools that do specialist trade & DIY jobs. From skip ramps and block splitters to access equipment and tar boilers you’ve got the industry’s widest selection of specialist branded products in one handy booklet.

Mixers

Gas Torches

Ladders & Access

DISCLAIMER: The Company’s standard terms & conditions apply and are available upon request. All product descriptions are correct at the time of printing. Images are for guidance only and do not necessarily represent the goods on offer. The company reserves the right to modify products and withdraw promotions without prior notice. All promotional and value-added FOC items are subject to stock availability, and may differ occasionally from those advertised. The Company endeavours to ensure that the information in this catalogue is correct, but does not accept any liability for any error or omission herein. All rights are reserved. No part of this publication may be reproduced or transmitted in any form without written permission of the copyright holder. Full terms & conditions are available upon request.

6 Door Charging Unit

Part No: S10400

Part No: S10450 Specification

Specification • Features 10 secure lockers, each with: - Coin return locking - 2-gang RCD protected 13A outlets - Numbered keys for easy ID - Individual locker venting • Integral management unit with: - MCB protected distribution unit - Hasp lock: padlock and 2 keys - 3M lead with 230V 16A plug - Manager instructions and guide

• Features: 6 secure lockers, each with: - key operated cam lock - 2-gang RCD protected 13A outlets - Numbered keys for easy ID - Individual locker venting

• Integral management unit with: - MCB protected distribution unit - Hasp lock: padlock and 2 keys - 3M lead with 230V 16A plug - Manager instructions and guide

NEW

Battery Charging Unit

10 Door Charging Unit

Features

01 Secure Charging 02 Coin Return Locking (10 Locker verison only)

03 Individually Numbered 003

Site Equipment BPT Site Equipment

Manual Tyrolean Machine

Double Suction Lifter

Part No: B01001

Part No: D90012

Specification • Designed to apply textured coatings to interior and exterior walls • Easy to use • Large capacity plastic body • Replaceable parts

Specification • Plastic body • Rubber suction clips • Capable of lifting 100Kg in weight

SC4 Block Splitter

Triple Suction Lifter

Part No: C21400

Part No: D90013

Specification

004

• Max cut: 12" x 4.5" • Easy cutting action operation • Cam lever operation • Accurate cuts every time • Long life blades • Heavy-duty construction

Specification • Plastic body • Rubber suction clips • Capable of lifting 150Kg in weight

SS10 Stainless Steel Chemical Sprayer 20ltr

GMCS 20 Compression Sprayer

8ltr Part No: F15350

Part No: ZF15200

Part No: ZF15300

Specification

• 1.2m flexible rubber hose • Complete with shoulder strap • Integral safety gauge • Stainless steel tank • Brass spray lance with adjustable nozzle

• Robust plastic body • Brass compression chamber • Brass spray lance • Adjustable nozzle for accurate spraying • Weight 3Kg (empty)

Specification • Tough plastic construction • Easy pumping action • Aluminium spray lance • Adjustable nozzle for precise spraying • Weight 2Kg (empty)

20ltr

Sprayers

GMCS 8 Compression Sprayer

005

Skip Ramp / Barrow

3M Skip Ramp

Builders Barrow

Part No: B40003

Part No: BEAGVPP

Specification

• Faster load capability • Lightweight construction • Patented design • Easy to store • No maintenance (no moving parts) • Safe working load up to 300Kg • Length 3M • Weight 35Kg

• 85L Heavy-duty press pan • Tubular frame • Galvanised • Puncture proof wheel

Features

Hold-fast clamp

006

Recessed wheel channel

Pitted walkway

Patented wheel trap & pivot bar

Ensign DPC 4 Way Pump

Manifold Assembly

Part No: K201630

Part No: K201625

Specification

• C/W 4 x 10in Tap Rods • 4-way manifold for use with the damp proofing machine • Assembled using polyurethane non-hardening hose • Includes a brass manifold block

• C/W 6 x 10in Tap Rods • 6-way manifold for use with the damp proofing machine • Assembled using polyurethane non-hardening hose • Includes a brass manifold block

Ensign DPC 4 Way Pump 10in Manifold

Snap Fit Extension Hose

Brown Flexi Plugs

110V & 240V

10M & 15M

1Kg & 10Kg

Part No: 110V K121110 240V K121240

Part No: 10M K251001 15M K251501

Part No: 10kg K40001 1kg K40011

110V & 240V Part No: 110V K120110 240V K120240

Damp Proofing

ENSIGN

Specification • Hypro twin piston pump head • Suction and return hose with fitted strainer • Independent on/off switch • Power take-off point for drill or breaker • Full wrap round frame for protection • Carry handle

Specification • Damp Proofing Kit 4way • Hypro twin piston pump head • Suction and return hose with fitted strainer • Power take-off point for drill or breaker • Full wrap round frame for protection • 4 way manifold complete with rods

Specification • Polyurethane non-hardening extension hose • Snap fitting

Specification • 1kg/10kg Pack of flexiheads

007

Tile Cutters

Versatile Power Pro 900 Bridge Saw

800W Bridge Saw

110 & 230V

230V

Part No: 110V 103440 230V 103450

Part No: 103620

Specification

• • • • • • •

• • • • • •

Induction motor 900w Diagonal tile cuts from 0–45° Direct drive motor has a thermal overload protection Oversized ‘bench style’ slotted aluminium cutting table with integral drainage Dual water feed increases blade life Large water tray with submersible pump Built–in carry handles

Super quiet induction motor 800w Diagonal tile cuts from 0–45° Diamond blade with continuous rim for clean cuts Ø200mm Constant speed for smooth cuts Water tray with drain plug for easier cleaning Removable stand

Straight, Angle & Mitre Cuts...

008

610mm

435mm

35mm

Straight Cuts

Profile Cuts

Irregular Angles

Including 45° Mitre Cuts 45°

Straight, Angle & Mitre Cuts...

620mm

440mm

35mm

The world’s leading supplier of TILING & FLOORING INSTALLATION EQUIPMENT

Straight Cuts

Profile Cuts

Irregular Angles

Including 45° Mitre Cuts 45°

Versatile Power Pro 750 Wet Saw

Part No:103420

Part No:103421

Specification

Specification as per Versatile Power Pro 750 Wet Saw 230V.

230V

• • • • • • • • •

110V

750w Direct drive produces a constant cutting speed for ultra smooth cuts Ø180mm x 16mm diamond blade with continuous rim for extra clean cut Extra large cast aluminium cutting table for supporting oversize tiles Cutting table tilts for 15˚, 30˚ and 45˚ mitres Water cooling system with large with large reservoir and integral drainage Transparent wheel guard with variable height adjustment Moulded plug with 1.5m cable Convenient built- in carry handle and cable tidy Black carrier is reversible for both 16mm and 22mm bore sizes

ALL

Tile Cutters

Versatile Power Pro 750 Wet Saw

25mm

General Purpose Diamond Blade Ø180mm & Ø200mm Part No: Ø180mm Blade 103407, Ø200mm Blade 103411 Specification Replacement diamond blade, suitable for cutting ceramic, terracotta, quarry, slate, marble, masonry concrete and stone tiles.

Straight, Angle & Mitre Cuts...

ALL

25mm

Straight Cuts

Profile Cuts

Irregular Angles

Including 45° Mitre Cuts 45°

009

Tile Cutters

Clinker Xl 900 Pro Tile Cutter

Clinker Xl 750 Pro Tile Cutter

Part No: BRUTUS900

Part No: BRUTUS750

Specification

• High precision cutting head with replaceable tungsten carbide wheel • Cutting head carriage with ball bearings for greater accuracy and easier use • Table extensions to support larger format tiles • Large graduated swivelling cutting guide • Replacement cutting wheel available • Comfortable co-moulded handle • Wheels for easy transport • Shock absorbing trays • 2 year guarantee • Carrying handle

Double Tray 900mm

900mm

635mm

20mm

Single Tray 750mm

750mm

530mm

20mm

Spare Parts

Order Part No

Qty

Spare Parts

Order Part No

Qty

Replacement cutting wheel

CXLWHEEL

Replacement cutting wheel

CXLWHEEL

010 The world’s leading supplier of TILING & FLOORING INSTALLATION EQUIPMENT

600 Manual Tile Cutter

Part No: 102380

Part No: 102370

Specification

• Compact and lightweight, with a rigid aluminium construction and adjustable cutting guide • Cuts tiles up to 630mm long, diagonal cuts on tiles up to 445mm square • Suitable for cutting wall, floor and ceramic tiles up to 13mm thick • Simple score and snap operation • Tungsten carbide cutting wheel

• Simple score and snap operation • Tungsten carbide cutting wheel • Straight cuts on tiles up to 600mm square • Diagonal cuts also possible on tiles up to 425mm square tiles • Suitable for cutting wall, floor and ceramic tiles up to 12mm thick

630mm

445mm

13mm

600mm

425mm

Tile Cutters

630 Heavy Duty Tile Cutter

12mm

Spare Parts

Order Part No

Qty

Spare Parts

Order Part No

Qty

Replacement cutting wheel

102385

Replacement cutting wheel

102375

011

Tile Cutters

Astro Pro Masonry, Concrete, Brick & Tile Cutter 230V

Part No: WSBMC720 Includes robust, protective carry case for ease of transportation

Specification • Powerful 720w industrial motor • Adjustable cutting depth - can be locked into place • Diagonal cutting guide • Water cooling system • Supplied with an anti-shock carry case, ideal for storage and transportation • Supplied with 2x Ø200mm blades: • 1x diamond blade with continuous rim for cutting tiles • 1x turbo disc for cutting: bricks, concrete tiles, flat tiles, roof tiles, terracotta, slate floors and • Thin concrete, stone, marble granite, sandstone (dry or wet cut)

General Purpose Diamond Blade Ø200mm Part No: 103411 Replacement diamond blade, suitable for cutting ceramic, terracotta, quarry, slate, marble, masonry concrete and stone tiles.

Straight, Angle & Mitre Cuts...

Straight Cuts

012

Profile Cuts

Irregular Angles

Including 45° 45° Mitre Cuts

ALL

45mm

Adhesive Mixer Paddle

Part No: 230V MIX1400 110V MIX1400IND

Part No: Ø120mm MIXADH120 Ø140mm MIXADH140

230V & 110V

Mixers

1400w Power Mixer

Ø120mm & Ø140mm

Specification

• Specially designed powerful motor • 2 Gears for high performance • Electronically controlled variable speed • Lockable speed control for continuous operation • Supplied in storage case • Paddle - Ø140mm • 1400w for mixing up to 120L • 2 Gear • Speed (no load) 300-700rpm

• Suitable for use with MIX1400/IND and MIXPLUS • Length 600mm • Designed to mix sticky and viscous materials e.g. tile adhesive, bonding mortar, jointing compound, ready mixed plaster, floor screed, fillers etc.

Mixes from bottom up

1600w Power Mixer Plus

Mixer Stand with Bucket

230V Part No: MIXPLUS

Part No: MIXSTBUCK

Specification

• Powerful high torque motor for more efficient mixing • Ergonomic handle to minimise fatigue • Variable speed for greater control • Safety on/off switch with lock-on function for continuous running • Thermal overload protection for increased safety • Robust carry case for ease of transportation • Paddle - Ø140mm • 1600w for mixing up to 120L • 2 Gear • Speed (no load) 300-700rpm

• Stand suitable for use with Vitrex Mixers • Effortless mixing for large quantities • Locking system provides multiple positions • Sturdy wheels allow for easy positioning • Folds for ease of storage and carrying

013 The world’s leading supplier of TILING & FLOORING INSTALLATION EQUIPMENT

Gas Torches 014

Plumber’s Torch

200mm Single Head Torch

600mm Single Head Torch

Part No: B21115

Part No: B21120

Part No: B22160

Specification • Regulation Trigger • 3 interchangeable burners Ø 10 – 14 – 17 mm • 5 m rubber hose PVC 3/8” 3/8” • Burner Ø 10 mm = inject 0.15 mm POWER 1 kW (lab test 4 bar) • Burner Ø 14 mm = inject 0.20 mm POWER 2 kW (lab test 4 bar) • Burner Ø 17 mm = inject 0.24 mm POWER 2.75 kW (lab test 4 bar)

Specification • Regulation Trigger • Neck 100mm long • Burner Ø 45 mm • 5 m rubber hose PVC 3/8” 3/8” • Burner Ø 45 mm = inject 1.00 mm POWER 53 kW (lab test 4 bar)

Specification • Regulation Trigger • Neck 600mm long • Turbo burner Ø 60 mm • 5 m rubber hose PVC 3/8” 3/8” • TURBO Burner Ø 60 mm = inject 1.50 mm POWER 75 kW (lab test 3 bar)

600mm Double Head Torch

600mm Triple Head Torch

600mm Quad Head Torch

Part No: B23260

Part No: B23360

Part No: B24445

Specification • Regulation Trigger • Neck 600mm long • 2 x turbo burner Ø 60 mm • 5 m rubber hose PVC 3/8" 3/8" • TURBO Burner Ø 60 mm = inject 1.50 mm POWER 75 kW X 2 pcs (lab test 3 bar)

Specification • Regulation Trigger • Neck 600mm long • 3 x turbo burner Ø 50 mm • 5 m rubber hose PVC 3/8” 3/8” • TURBO Burner Ø 50 mm = inject 1.40 mm POWER 44 kW X 3 pcs (lab test 3 bar)

Specification • Regulation Trigger • Neck 600mm long • 4 x turbo burner Ø 45 mm • 5 m rubber hose PVC 3/8” 3/8” • TURBO Burner Ø 45 mm = inject 1.20 mm POWER 42 kW X 4 pcs (lab test 3 bar)

Gas Cylinder Cages Part No: See below B50010 B50020 B50030 B50040 B50050 B50060 B50070 B50080 B50090

Gas Cylinder Cage GC05 Gas Cylinder Cage GC15 Gas Cylinder Cage GC20 Gas Cylinder Cage GC25 Gas Cylinder Cage GC30 Gas Cylinder Cage GC35 Gas Cylinder Cage GC40 Gas Cylinder Cage GC50 Gas Cylinder Cage GC55

Accepts 3 x 19kg cylinders Accepts 6 x 19kg cylinders Accepts 4 x 47kg cylinders Accepts 9 x 19kg cylinders Accepts 9 x 47kg cylinders Accepts 10 x 47kg cylinders Accepts 15 x 47kg cylinders Accepts 25 x 47kg cylinders Accepts 24 x 47kg cylinders

900mm high x 1000mm wide x 500mm deep 1700mm high x 1000mm wide x 500mm deep 1800mm high x 900mm wide x 900mm deep 1200mm high x 1200mm wide x 1200mm deep 1800mm high x 1200mm wide x 1200mm deep 1800mm high x 1800mm wide x 900mm deep 1800mm high x 1800mm wide x 1200mm deep 2000mm high x 2000mm wide x 2000mm deep 1800mm high x 2400mm wide x 1800mm deep

50 x 50 x 3mm Weld Mesh 50 x 50 x 3mm Weld Mesh 50 x 50 x 3mm Weld Mesh 50 x 50 x 3mm Weld Mesh 50 x 50 x 3mm Weld Mesh 50 x 50 x 3mm Weld Mesh 50 x 50 x 3mm Weld Mesh 50 x 50 x 3mm Weld Mesh 50 x 50 x 3mm Weld Mesh

Weight: 50kg Weight: 80kg Weight: 80kg Weight: 60kg Weight: 90kg Weight: 100kg Weight: 110kg Weight: 140kg Weight: 140kg

Fixed Internal Shelf

Gas Cylinder Cages

Specification • Hinged door with hasp and Staple • Fixing points for bolting to solid surface • Supplied Flat Packed with fixings • Includes H&S Signage

Fold Away Gas Cage Part No: S10360 • Size: 1700 x 880 x1735mm (L x W x H) • Weight: 130Kg • Manufactured from mild steel sections between 3 & 5mm thick • Covered with 2” x 2” 10g mild steel, copper coated weld mesh • Iron phosphated pre-treatment and powder coated • Comes with signs • Flat Pack: convienient for easy storage flat pack design • Dimensions: - Body 62.6Kg - Lid 14Kg - 2x doors 10.1Kg & 12.5Kg - 2x Internal shelves (735 x 750mm) 7.5Kg each

015

Roofing Tools

Tar Boiler Kit

Tar Boiler Kit (with tap)

5gl, 10gl, 15gl, 25gl, 40gl

10gl, 15gl, 25gl

25gl & 40gl

Part No: See Below

Part No: 25gl B60050 40gl B60600

B11051 B11102 B11152 B11252 B11253

5 gl Kit (without tap) 10 gl Tar Boiler Kit (without tap) 15 gl Tar Boiler Kit (without tap) 25 gl Tar Boiler Kit (without tap) 40 gl Tar Boiler Kit (without tap)

B12102 B12152 B12252

Tar Boiler Site Trailer

10 gl Tar Boiler Kit (with tap) 15 gl Tar Boiler Kit (with tap) 25 gl Tar Boiler Kit (with tap)

Specification • Single axle construction • Un-braked • Chassis and integral • Frame manufactured from rolled hollow section • Gas bottle storage complete with safety chain and heatshield

Regulator Part No: B18402

Specification Specification

016

• Removable inner tank • Fully enclosed burner bracket • Adjustable 0-4 bar regulator • 5m of armoured hose

• Removable inner tank • Fully enclosed burner bracket • Heavy duty 10-25 gallon burner • Adjustable 0-4 bar regulator • 5m of armoured hose

Specification • 0-4 bar regulator

• Fitted with lighting board • Tow coupling - eye or ball as required • Jockey support wheel • 2 x prop stands • Mudguards

Spouted Bucket

Tar Boiler Ladle

Standard Over Spill Tray

Part No: B15130

Part No: B15375

Part No: B18800

Specification

• Made from reinforced steel • 3 Gallons

• Made from reinforced steel

• British made overspill tray to fit any small (10gl), medium (15gl) large (25gl) boiler • Made from 2mm steel

Pouring Can

3gl

1200mm x 900mm

5M Rubber Hose

3gl

Rubber or Armoured

Compound Bucket

Part No: B15232

Part No: Rubber B18500 Armoured B18600

Part No: B25070

Roofing Tools

PRO ROOFING KIT for expert results

3gl

Specification

Specification • Made from reinforced steel • 3 Gallons

• 5M in length • 6mm thickness • Rubber Hose; for use with torches only • Armoured Rubber Hose; for use with torches and tar boilers

Specification • Made from stainless steel • 3 Gallons

017

Pump Solutions Pump Solutions

Oil/Diesel Barrel Pump

1¼" Submersible Sump & Drainage Pump

1" Submersible Sump Pump

110V & 240V

230V Dual control

Part No: See Below

Part No: EGO500

Part No: MS25

A submersible pump for use in narrow pits and sumps, which may be shallow or contain low levels of clean water.

Model MS is a basic, fully rotary, cast iron and brass hand pump for diesel, paraffin and oil transfer.

MIZAR30A MIZAR30A1 MIZAR30M2 MIZAR30M1

1 1/4" Pump, Auto 240V 1 1/4" Pump, Auto 110V 1 1/4" Pump, Manual 240V 1 1/4" Pump, Manual 110V

The Mizars are 304 stainless steel pumps for domestic, trade and industrial use. With two motor sizes to select from, models are available with or without a float switch, and in 110 volts or 230 volts. Standard model takes soft solids up to 10mm°.

Supplied with 25mm outlet spout, 1000mm (3 part) rigid riser tube, barrel adaptor, strainer stand and operating handle.

It has a dual control switch, which lets the internal float switch to be switched to “on” or “off” by the user, to enable automatic level control or for manual drainage.

It should not pump water, petrol, chemicals, solvents or products with a low flash point.

1" Transfer Pump

Pump Specification Part No.

Manual/Auto

MIZAR30A MIZAR30A MIZAR30M MIZAR30M EGO 500 MS25 ENM25 ENM252

018

inlet/outlet (mm)

flow (l/min)

head (mtrs) w x l x h (mm)

Dry weight (kgs)

A 32 0.25 150 7 Ø154x234 5.2 A 32 0.25 150 7 Ø154x234 5.2 M 32 0.25 150 7 Ø154x234 4.9 M 32 0.25 150 7 Ø154x234 4.9 A/M 25 0.47 170 7.5 168x206x280 3.6 n/a 25 n/a 25 n/a 130x220x1265 4.5 n/a 25/25 0.45 55 13 141x318x190 9.0 n/a 25/25 0.45 55 13 141x318x190 9.0

Part No: 110V ENM25 240V ENM252 ENM pumps are self-priming with bronze bodies and single impellers. With a forward and reverse switch for filling and emptying duties they are good, general-purpose, portable pumps for circulating and transfer of water, sea-water, juices, gas oil (“red diesel”), bio-fuel, transformer oil and mild chemicals.

Hose Coupling

Hose Joiner

Part No: See Below

137119 P10112 P10117 P10122 P10132 137119.3 137125.3 137132.3 137150.3 137180.3

6M Coil ¾" 6M Coil 1" 6M Coil 1¼" 6M Coil 2" 6M Coil 3" 30M Coil ¾" 30M Coil 1" 30M Coil 1¼" 30M Coil 2" 30M Coil 3"

Specification General purpose hose for inlet use/suction side of engine driven pumps or for general discharge. Rigid but flexible, shock resistant, embedded nylon spiral-helix reinforced.

13012502 13015003 13018003

Hose Coupling / Brass 1" Hose Coupling / Iron 2" Hose Coupling / Iron 3"

13382504 13385004 13388004

Hose Joiner 1" Hose Joiner 2" Hose Joiner 3"

Specification Swivel couplings for attaching a hose to a threaded fitting on a pump.

Specification Aluminium tube with ridges for joining two lengths of pipe together.

Cam Coupling

Tin Strainer

Pump Leads

Part No: See Below

Part No: 999-000-010

13402504 13405004 13408004 13412504 13415004 13418004

Pump Solutions

Suction & Delivery Hose ¾"- 3"

6M & 30M

Cam Coupling, Part A 1" Cam Coupling, Part A 2" Cam Coupling, Part A 3" Cam Coupling, Part C 1" Cam Coupling, Part C 2" Cam Coupling, Part C 3"

Specification Quick release hose couplings in aluminium overcome the problems of cross threading and lost washers associated with threaded connections on engine pumps. The threaded part is permanently attached to the pump and the two lever part is permanently attached to the hose for a quick conection and an air tight seal.

13602504 13605004 13608004

Tin Strainer 1" Tin Strainer 2" Tin Strainer 3"

Specification Strainer in tin, for use on suction hose of engine driven pumps to keep debris out that may clog/damage the pump.

Specification Replacement sub pump leads in HO7RNF rubber 1.5mm. Will fit to Tsurumi, JS and Koshin 110V and 230V submersibles.

019

Pump Solutions Pump Solutions

Float Switch

Layflat Hose

Part No: 999-000-111

Part No: See below P10210.5 P10211 P10212.5 P10213 P10220.2 P10220.5 P10222 P10223

1” Layflat Hose - 100M Roll 1” Layflat Hose - 10M Length 1 1/4” Layflat Hose - 100M Roll 1 1/4” Layflat Hose - 10M Length 2” Layflat Hose - 100M Roll 2” Layflat Hose - 10M Length 3” Layflat Hose - 100M Roll 3” Layflat Hose - 10M Length

Specification Float switch to control water levels. For retro-fitting to Tsurumi, JS and Koshin 110V and 230V submersibles.

Specification General purpose hose for open end discharge of water on engine pumps, submersible pumps and hand pumps. Soft, flat and flexible, yarn reinforced construction.

Pressure Test Pump

Dirty Water Centrifugal Pump

Part No: 25BAR PT25 50BAR PT50

Part No: See below

25BAR, 50BAR

LC25 LC50 LC80

020

1” Diesel Transfer Kit

10M & 100M

Specification The PT models are pressure test pumps for leak testing in water pipe systems. Suitable for pressurised plastic pipe plumbing and central heating systems. The reservoir is in powder coated steel with ½” male BSP connectors, heavy duty handle and supplied complete with a connector hose. Not suitable for gas pipe testing.

1” Dirty Water Centrifugal Pump 2” Dirty Water Centrifugal Pump 3” Dirty Water Centrifugal Pump

Specification The LC pumps are self-priming, centrifugal pumps with 4 stroke Loncin petrol engines, by Loncin of China. All models have aluminium pump housings for portability and ceramic mechanical seals, cast iron volutes, cast iron impellers and oil alerts for reliability.

Part No: 110V COUGAR 230V COUGAR2

Specification The Cougars are self-priming pumps for pumping diesel and biodiesel. The motors have rocker switches, internal filters (for trapping debris) and by-pass valves (for 2 minutes use against a closed nozzle). Kit includes a manual nozzle, hose fittings, strainer, hose and easy carry frame. Motor: 0.37kW Flow: 50 l/min Head: 20 mtrs Dimensions(mm) & weight in frame: 250 x 310 x 270 & 8.5 kgs It must not pump water, petrol high viscosity liquids, chemical, solvents or any low flash point liquid.

1” Diesel Transfer (Low Voltage)

12V DC

Part No: DCC

Specification The DCC is a low voltage (D.C.) self-priming pump for pumping diesel and biodiesel only. The motor has a duty cycle of 30 minutes. It has a carry handle and is supplied with a 2 metre battery cable, crocodile clips, integral fuse and a switch. Included is a pumping kit that comprises hose, nozzle and connectors. Motor: 22 amps Flow: 30 l/min Head: 10 mtrs Dimensions (mm) & weight: 112 x 200 x 145 & 4.0 kgs It must not pump water, petrol high viscosity liquids, chemical, solvents or any low flash point liquid.

Dirty Water Centrifugal Pump

2" & 3"

Part No: See below

Part No: 2" TET50HA 3" TE480HA

LB4801A LB480A LB480 LB480M

TET50HA TE480HA

2” Pump, Auto 110V 2” Pump, Auto 240V 2” Pump, Manual 110V 2” Pump, Manual 240V

2” Dirty Water Centrifugal Pump - Petrol 3” Dirty Water Centrifugal Pump - Petrol

Specification The LB series are heavy duty, yet lightweight, contractor pumps for dirty and abrasive site water. The dual position outlet on the LB480 and LB800, gives the option of either verticle or non kink horizontal pumping. Designed to operate for extended periods in seepage conditions. Available with or without a float switch.

Specification The TE pumps are self priming centrifugal pumps with Honda 4 stroke petrol engines, by Tsurumi of Japan. They have aluminium pump housings for portability, and ceramic mechanical seals, cast iron volutes, cast iron impellers and oil alerts for reliability.

Diaphragm Pump

Semi Trash Centrifugal Pump

Part No: 2" TD200HA 3" TD300HA

Part No: 2" TDS50HA 3" TDS80HA

Specification The TD series are automatic priming, engine driven diaphragm pumps with Honda petrol engines (with oil alert), from Tsurumi of Japan. They have maintenance free gearboxes, surge reduction chambers and an aluminium pump chamber. Capable of dry running. A site trolley is available as an optional extra.

Specification The TDS models are self-priming, centrifugal, semi-trash pumps with Honda petrol engines, by Tsurumi of Japan. They can pump solids up to 20mm in diameter. All models have aluminium pump housings for portability and silicon carbide mechanical seals, cast iron volutes, cast iron impellers and oil alerts for reliability.

2" & 3"

SEE TABLE ON PAGE 22 FOR PUMP SPECIFICATION

Pump Solutions

2" Submersible Contractor Pump

Auto, Manual, 110V & 240V

2" & 3"

021

Pump Solutions

1" Submersible Residue Pump

Dirty Water Centrifugal Pump

Part No: 110v LSC1.4S 230v LSC1.4S/230

Part No: TEM25H

Part No: 2" TE350RD 3" TE380RD

The TEM25H is a self priming centrifugal pump with a Honda 4 stroke petrol engine, by Tsurumi of Japan. It has an aluminium pump housing, volute, impeller and a ceramic mechanical seal.

The TE pumps are self-priming pumps powered by compact Subara-Robin diesel engines. Heavy duty design, yet portable, easy to start up and operate they can pump site water. With good flows and pressure, they are suitable for site use, land drainage and general transfer. Supplied in easy carry frame with strainer and couplings.

110V & 230V

LSC1.4S “puddle sucker” is used for pumping dirty site water, from a flat surface down to 1mm. The dual position outlet gives the option of non kink horizontal pumping or vertical pumping with the integral swing check valve also preventing back flow. A tough contractor’s pump designed to operate for extended periods in seepage conditions.

2" & 3"

Pump Specification Part No.

Manual/Auto

LB4801A LB480A LB480M LB480M LSC1.4S LSC1.4S/230 TEM25H TET50HA TE480HA TD200HA TD300HA TDS50HA TDS80HA TE350RD TE380RD

022

inlet/outlet (mm)

A A M M M M n/a n/a n/a n/a n/a n/a n/a n/a n/a

kW/engine

50 50 50 50 25 25 25/25 50/50 80/80 50/50 80/80 50/50 80/80 50/50 80/80

flow (l/min)

0.48 0.48 0.48 0.48 0.48 0.48 GX25 GX120 GX160 GX120 GX160 GX120 GX160 DY23D DY23D

head (mtrs)

225 225 225 225 170 170 140 520 1000 120 240 780 1150 600 900

w x l x h (mm)

11 11 11 11 11 11 40 32 32 17 18 23 23 28 28

dry weight (kgs)

Ø187x275 10.80 Ø187x275 10.80 Ø187x275 10.40 Ø187x275 10.40 Ø196x316 12.00 Ø196x316 12.00 215x340x270 5.00 356x470x350 22.00 375x527x420 27.00 610x620x510 39.00 740x660x510 46.00 345x470x420 24.00 370x525x420 27.00 410x505x495 40.00 410x590x510 42.00

Trash Pump

Part No: See below

2", 3", Auto, Manual, 230V, 110V

P U MP

SV400M110 SV400M230 SV400A110 SV400A230 SV750M110 SV750M230 SV750A110 SV750A230

2” Trash Pump, Manual 0.4kW 110V 2” Trash Pump, Manual 0.4kW 230V 2” Trash Pump, Auto 0.4kW 110V 2” Trash Pump, Auto 0.4kW 230V 3” Trash Pump, Manual 0.75kW 110V 3” Trash Pump, Manual 0.75kW 230V 3” Trash Pump, Auto 0.75 kW 110V 3” Trash Pump, Auto 0.75kW 230V

SV400M

P U MP S

3/4” Sump Pump, Auto 240V 3/4” Sump Pump, Manual 240V 1” Sump Pump, Auto 240V 1” Sump Pumo, Manual 240V 2” Clean water pump, Manual 110V 2” Clean water pump, Manual 240V 2” Clean water pump, Auto110V 2” Clean water pump, Auto 240V

BPS80A BPS80M BPS100A BPS100M BPS400M110 BPS400M240 BPS400A110 BPS400A240

¾", 1", Auto, Manual, 240V, 110V/ 240V

Pump Solutions

Sump Pump

SV750A

The SV series is a range of submersible pumps, with vortex impellers, for dirty water containing hard solids & fibrous matierials. With cast iron pump casings, base plate and impeller, stainless steel motor frames and thermoplastic head covers (SV750, cast iron). They are well suited to domestic and industrial applications.

Pump Specification Part No.

BPS400A

BPS100A

The BPS range combines excellent lifecycle with value for money performance in domestic and trade applications. Automatic models have a float switch fitted for automated control of water levels i.e. turning on and off when water levels rise and fall in sumps. Manual models do not have a float switch. For drainage and transfer applications - BPS80 and 100 manual versions are capable of pumping water down to 3mm. Constructed in thermoplastic, they are suitable for clean and slightly dirty water.

Manual/ Outlet (mm) Auto

Flow (l/min)

Head (mtrs)

wxlxh (mm)

Dry weight (kgs)

BPS80A A 19 0.08 40 4 Ø136x255 2.20 BPS80M M 19 0.08 40 4 Ø136x255 1.95 BPS100A A 19 & 25 0.10 70 6.5 134x155x250 2.80 BPS100M M 19 & 25 0.10 70 6.5 134x155x250 2.50 BPS400M110 M 50 0.4 220 9 160x200x365 7.35 BPS400M240 M 50 0.4 220 9 160x200x365 7.35 BPS400A110 A 50 0.4 220 9 160x200x365 7.50 BPS400A240 A 50 0.4 220 9 160x200x365 7.50 SV400M110 M 50 0.4 350 8 160x215x420 11.30 SV400M230 M 50 0.4 350 8 160x215x420 11.30 SV400A110 A 50 0.4 350 8 160x215x420 11.55 SV400A230 A 50 0.4 350 8 160x215x420 11.55 SV750M110 M 80 0.75 425 11 165x265x440 17.15 SV750M230 M 80 0.75 425 11 165x265x440 17.15 SV750A110 A 80 0.75 425 11 165x265x440 17.40 SV750A230 A 80 0.75 425 11 165x265x440 17.40

023

Transformers / Power Splitters 024

Power Pod Transformer In 230V / out 110V

Spider Ball - Power Distribution Unit

Spider Pod - Power Splitter

110V, 230V

110V

Part No: E205100

Part No: 110v E13200, 230v E13210

Part No: E13220

Specification > Perfect for site power conversion from 240V to 110V > Tough rubberised DuPont casing protects against the rigours of site use and transportation > Recessed outlets prevent them from being sheared off in harsh environments > Power-on indicators for each socket show when tools are powered up

Specification > Redistribution of 110V site power to use 110V appliances > Durable nylon/rubber casing provides extra protection for use in harsh conditions > Recessed outlets prevent them from being sheared off in harsh environments > Useful extra features include visible power-on indicators and cable tidy with securing strap > Outlets 4x 16A

Specification > High impact, lightweight nylon shell for use in tough applications > Flexible, multi-directional outlets supply power to multiple tools > Compact design allows for easy trasportation and storage > Outlets 4x 16A

5KVA TRANSFORMER

110V

Part No: E203010

Part No: E205042

Specification • Resettable circuit breaker • 2m of cable • Max wattage of lighting that can be used is 1000W

5KVA SITE TRANSFORMER

Specification • Resettable circuit breaker • 2m of cable • Max wattage of lighting that can be used is 1666W

10KVA AIR COOLED SITE TRANSFORMER

110V

Part No: ZE210028

Part No: ZE210022

Specification • IP23 rating • Protected by MCB’s • Double wound with safety earth screen • Weight: 45Kg

Specification • IP23 rating • Protected by MCB’s • Double wound with safety earth screen • Weight: 91Kg

HIGH QUALITY, CUTTING-EDGE POWER DISTRIBUTION SOLUTIONS

Transformers / Power Splitters

3KVA TRANSFORMER

025

Transformers / Power Splitters

4-Way Power Distribution Unit

6-Way Power Distribution Unit

Part No: E13115

Part No: E13125

Specification • 16A Distribution box • 2.5mm cable • Fitted plug • Steel cased • Fitted MCB

Specification • Steel cased • Fitted MCB

Classic 4-Way Power Distribution Unit

2-Way Power Distribution Unit

Part No: E13104

Part No: E13111

Specification • 16A Distribution box • 2.5mm cable • Fitted plug • Steel cased • 4x Outlets

Specification • 32A Distribution box • 4mm cable • Fitted plug • Fibreglass case • 6x Outlets

110V

026

HIGH QUALITY, CUTTING-EDGE POWER DISTRIBUTION SOLUTIONS

110V

13-13A RCD Unit

In-line RCD Unit

Part No: E11070C

Part No: E11092

Part No: E11085C

Specification • 13A RCD wireable plug

Specification • 13A plug • 13A socket • Fibreglass case • 2M cable

RCD Socket

13-16A RCD Unit

Part No: E11060C

Part No: E11090

Specification • 13A RCD plug & socket

Specification • 13A plug • 16A socket • Fibreglass case • 2M cable

Specification • 13A plug • 16A socket • 1M of arctic blue cable • Inline RCD

RCD Plugs and Sockets

RCD Plug

027

Manual Handling 028

Pallet Truck

Sack Truck

Part No: T01000.1

Part No: ST250/S8

Specification • Twin nylon steering wheels • Twin nylon bogey wheels • Durable leak proof hydraulic system • Maximum lifting capacity 2500Kg • Turning radius for manourvrability 210° • Fork length 1100mm • Width over forks 550mm • Weight 85Kg

Specification • Heavy-duty sack truck • 250kg carrying capacity • All tubular frame construction • Standard toe plate • Wheel guards • Solid rubber tyres

Aluminium

Part No: 316515

Part No: See below

Specification • Use in flat slab mode or on stairways • Simple height adjustment rung by rung • Double guardrails and positive locking gate on platform • Deep draining tool tray • Deck lock clip – auto lock • Excellent stabilisation • Robust aluminium chequer plate toeboard • Tough wheels for easy movement around site • Rugged rubber stabiliser overboots • Spring loaded stowage catch • Ladder section alignment bars at both sides

Specification • Available in 3, 4, 6, 8 and 10 tread • Ideal for working at fixed heights, easier to maneuver than scaffolds or lifts • LOCKTOP™ waist-high guard rail securely wraps around work zone • Extra-large standing platform for long standing comfort • EDGE360™ gives protection from every angle with integrated rail shield, EDGE bracing and oversized foot pad • 4X Work Zone allows you to work facing any direction

NON CONDUCTIVE

TOUGH

Ladders and Access

Podium Ladder

Teleguard

STABLE

VARIABLE VERSATILE DURABLE

Product Code

Rungs per section

Platform Size (m)

Height Adjustments

Max Safe Working Height (m)

Load Capacity (kg/stone)

Weight (kg)

316515

4-6

6.10 x 4.44

3.63

150/23.6

TOUGH

STABLE

VERSATILE DURABLE

Product Code

Treads

Platform Height (m)

Duty Rating (kg/stone)

52750300

0.91

136/ 21.4

Weight (kg)

10.3

52750400

1.22

136/ 21.4

12.1

52750600

1.93

136/ 21.4

15.6

52750800

2.44

136/ 21.4

21.3

52751000

3.05

136/ 21.4

26.7

029

Ladders and Access

Trade 200

Trade 400

Part No: 570122

Part No: 570213

Specification • High-performance box-section alloy stiles • Easy, push up operation • Slip-resistant square rungs • Rung clips secure together for safe & easy use and transport • Unique wrap-around top clips fit with smooth-glide runners for reduce wear and tear

Specification • 30mm-deep square rungs for strength and comfort • Wall wheels to make ladder extension easier • Easy, push up operation • Rung clips secure together for safe and easy use and transport • Unique wrap-around top clips fit with smooth-glide runners for reduce wear and tear

2 section Aluminium

TOUGH

2 section Aluminium

VARIABLE VERSATILE DURABLE

TOUGH

VARIABLE VERSATILE DURABLE

Product Code

Sections x Rungs

Closed Height (m)

Open Height (m)

Max Safe Working Height (m)

Duty Rating (kg/stone)

Weight (kg)

Product Code

Sections x Rungs

Closed Height (m)

Open Height (m)

Max Safe Working Height (m)

Duty Rating (kg/stone)

Weight (kg)

570112

3 x 10

3.08

7.43

7.68

110/17.3

20.99

570213

2 x 12

3.69

6.30

6.62

110/17.3

13.29

Ladder Rack Clamp (Pair)

Ladder Stay

Part No: 303898

Part No: 300870

Steel

Specification • Reduces the risk of theft and frees up interior vehicle space • Includes padlocked for extra security • Fits to most extension ladders • Supplied as a pair • Approx. 0.27m of adjustment

030

Specification • Fits easily to most extension ladders • Avoid damage to gutters, tiles and windows

Odd Job 600

Aluminium

Part No: 310898

Part No: 312898

Specification • Compact folded dimensions for easy storage • Large non-slip platform • Lightweight and easy to transport • Splayed base for extra stability

Specification • Large non-slip platform • Splayed base for extra stability • Compact folded dimensions for easy storage • Lightweight and easy to transport • Simple to use • Perfect for all odd jobs

LIGHTWEIGHT

TOUGH

STABLE

Ladders and Access

Odd Job 600 GRP

COMPACT

DURABLE

LIGHTWEIGHT

TOUGH

STABLE

COMPACT

DURABLE

Product Code

Folded Size (m)

Platform Size (m)

Platform Height (m)

Load Capacity (kg/stone)

Weight (kg)

Product Code

Folded Size (m)

Platform Size (m)

Platform Height (m)

Load Capacity (kg/stone)

Weight (kg)

310898

0.73 × 0.38 × 0.18

0.30 × 0.70

0.51

110/17.3

312898

0.63 x 0.68 x 0.18

0.60 x 0.60

0.51

110/17.3

5.7

031

Birchwood Price Tools Specialist Equipment Directory. Designed and Distributed by Birchwood Price Tools. Birchwood Price Tools is a trading name of the BSS Group Limited. Part No: K56756