test by bram

TUTORIAL

ART100.tutphoto 50

September 2004

21/7/04 1:54:27 pm

TUTORIAL

PHOTOSHOP CS

ADD ANOTHER DIMENSION

It’s relatively easy to spice up your photos in Photoshop. But how about taking it one step further? The key to success is to fix your colours and enhance them. That way you’ll be sure to achieve eye-catching results ON THE CD You will find all the files you need to complete this tutorial in the folder named Tutorial\Photoshop

TIME LENGTH

1.5-2 hours INFO Chuck Anderson, who works under the name NoPattern, is a freelance artist from Chicago. He has worked with dozens of magazines and a huge range of clients, including Sony and McDonald’s. See more of his work at www.nopattern.com

Okay, so you’ve grasped the techniques, but you need more than that if you’re to produce a range of original eye-catching work. Don’t underestimate the power of composition or the importance of balance. This tutorial will teach you to create stunning effects using glows, loads of Colour Dodge, and lots and lots of neon – hot pinks and lemon yellows are prominent here. You’ll also learn how to utilise white in all the right places, so that white areas look less like negative space and more like the result of added energy and light. The finer details are very important, too. The small glowing dots used throughout this image may be small, but they add so much. Always pay attention to detail in anything you create – simplicity is good but there are always details that, when added, make all the difference. This tutorial stresses the importance of strong colour. The background of this piece contains a faint floral pattern, which is key, but very subtle. It does not call your attention or stand out on its own. Rather, it serves its purpose as a background correctly. In addition, another dimension is added using flowers and scanned imagery, giving the image a truly organic feel. So keep in mind the importance of strong colours and solid composition in all your work and you’ll see instant results.

Open Model1.tif from the cover CD. Adjust the Brightness/Contrast to -50 and +30, respectively. Now go to Filter>Sharpen> Sharpen to ensure that the whole image appears as crisp as possible.

Create a new layer named Colour Fades. Set the Blending style to Colour Burn. Select the Path you made in step two and click on Load Path as a Selection.

Using the Pen tool, draw an outline around the girl’s body. Do not worry about the ﬁner details around the hair, but do make sure that you outline inside the area where her arms bend upwards. Save this Path and label it “Outline”.

Now select a default circle-shaped Brush with soft edges and make the size roughly 550. Using bright pinks, yellows, greens and blues, brush lightly on the girl’s skin using single clicks to add subtle colour to the shadows already present.

Photography by Paul&Paul www.paulandpaul.co.uk Illustration by Chuck Anderson www.nopattern.com

September 2004

ART100.tutphoto 51

| 51

21/7/04 1:54:34 pm

TUTORIAL

PHOTOSHOP CS

Make a new layer and label it Colour Fades Background. Again, click on Load Path as a Selection before choosing Select>Inverse. Repeat step four, but add the soft colour to the background, mostly around the girl’s body.

Next, make a new layer and label it “Diagonal Lines”. Using the Polygonal selection tool, create diagonal lines going from the middle of the left edge to the middle of the top edge. Then, with the Brush tool, paint inside using the same technique as you did on the girl, using pink and yellow.

Using the same brush, make long strokes across the girl’s body, working from the bottom left to the top right to create the wires/lines. Repeat this process until you have dozens. You could change the size of the brush to produce a thicker wire.

FOLDER IT If you use the Pen tool to outline a subject within a photo, you can add elements in front of and behind the subject to make your design/illustration appear as though it’s part of the photo. Outline the subject with the Pen tool, then choose Load Path as a Selection in the Paths palette and choose Select>Inverse. Create a new layer and draw/paste into the selected area. Your design will then go on to the background only.

ART100.tutphoto 52

Open BackgroundDesign.tif from the cover CD, Select All and Copy. Go back to the main image, click on Load Path as a Selection and then choose Select>Inverse and then Edit>PasteInto. Rename this layer “Background Design”.

Create a new layer and label it “Stars, Wires”. Next, choose Layer>LayerStyle >OuterGlow. Set the Blend mode to Colour Dodge, the Opacity to 100 per cent, noise to 0 per cent, and use a solid pink colour (#F19AC2). Ensure that Technique is set to Softer, Spread to 0, and Size to 18.

Create a new layer named “Wires Behind”. Select the Outline path, click Load Path as a Selection and then Select>Inverse. Use the technique used in step 11 to make the wires again, only this time you should make them behind the subject. This adds dimension to the image.

Duplicate and move the Background Design layer until you have enough to ﬁll the background. Then merge all of these duplicated layers into one and again label it “Background Design”. Finally, set the Opacity to about 15-20 per cent – whatever looks good to you.

13 10

Choose a default soft edge circle Brush with the Airbrush turned on at or around size 12. Click randomly all over the background to create a galaxy of stars. Try clicking and holding to utilise the Airbrush feature and create a larger star.

Open Design.tif from the cover CD, Select All and then Copy. Paste this into the main image and rotate it to ﬁt accurately into the curve of her arm. Move to her chest, and set the Layer to Screen.

September 2004

21/7/04 1:54:38 pm

TUTORIAL

LAYER STYLE

Duplicate this Layer before choosing Edit>Transform>FlipHorizontal. Move the Layer to her left-hand side so that it aligns correctly with the ﬁrst and, ﬁnally, set this layer to Screen.

When you create a new layer, you can immediately set its style. Take Outer Glow, for example – everything done in that Layer will obtain the Outer Glow settings you choose from the start. When on a dark or black background, setting the Blending mode in the Layer style to Color Dodge will provide you with a vibrant, neon glow – the same style used to give the glow effects to the stars and wires in this tutorial.

Open Fireworks.tif from the cover CD and Copy and Paste it into the main image. Set the Blending mode to Lighten, the Brightness to -30 and the Contrast to +30. Position the ﬁreworks near her ear.

Go back to the “Stars, Wires” layer, right-click on it and select Copy Layer Style. Create a new layer named “Beauty”. Right-click this new Layer and choose Paste Layer Style. Now, using the default soft-edge Brush tool at size 10, write the word “Beauty”.

Open Flowers1.tif from the cover CD and then Copy and Paste it into the main image. Set the Blending mode to Screen and place it on the left-hand side, near her right arm, as shown.

Now open Flowers2.tif and again, Copy and Paste into the main image. Set the Blending mode to Screen. Move these ﬂowers to the bottom-middle area near the girl’s hip so that the stems follow the curve of her body.

Duplicate that Layer. Next, choose Edit>Transform>FlipHorizontal and then Edit>Transform>Scale and make it a little smaller, ensuring that you keep it in proportion. Place this alongside her other arm.

Duplicate this Layer. Choose Edit> Transform>Flip Horizontal and then Edit>Transform>Scale and make the new layer about one-third the size of the ﬁrst. To balance the composition, place this on the left-hand side, next to her other hip.

On the main Layer, the original photo, use the Burn tool on the Shadows at 100 per cent and go over the girl’s face once with a size 100 soft-edge Brush. This adds great shadow and deﬁnition to her face.

Finally, ﬂatten the image so that you have just one Layer and go to Image> Adjustments>ColorBalance. Set Cyan to -50 to remove the hot colours and give it a crisper feel. You can now adjust any of the other colours until you reach your desired hues.

NEXT ISSUE

UNDERWATER A new technique using water and a colour printer

September 2004

ART100.tutphoto 53

| 53

21/7/04 1:54:43 pm