34
www.wykamol.com - salesdepartment@wykamol.com
Structural Waterproofing Basement conversions are increasingly popular and here at Wykamol we have everything you need to complete the job. The key to success in any below-ground conversion project is to ensure the area is completely waterproof – which is where Wykamol’s expertise becomes invaluable. With over 70-years experience in the market place we can supply everything you need to ensure a successful job. We have a complete range of treatments, waterproof membranes, sump pumps and drainage systems. All this means that once neglected dank and mouldy basements can be transformed into wonderful cosy living areas. Clearly, when working below ground the quality and durability of materials is extremely important, which is why we offer two systems backed up by Agrément Board Certification. Whatever system you go for, the technical and sales staff at Wykamol will always be happy to help you create dry, habitable rooms out of formerly overlooked basements. Using the complete Wykamol range can produce incredible results. Data sheets on all the products can be obtained separately by calling 0845 400 6666.
Membranes Wykamol's high quality Cavity Drainage membranes provide an air gap between the membrane and the wall, which allows any free water to run behind it. The membrane is mechanically fixed to the original sound wall surfaces then overlaid with treated battens or other framing systems, on to which plasterboard can be fixed. In some circumstances the battens can be omitted and plasterboard and membrane fixed using special plastic plugs, alternatively a wet plaster could be applied. Wykamol has an extensive range of membrane types, from shallow studded 'Slimline' profiles to deep cavity (20 mm) flooring products which allows a wide variety of
situations to be dealt with providing tailored solutions. The final choice of membrane is determined by two factors: 1). the finish required and 2). the anticipated flow rate. Since the introduction of the British Standard for water proofing structures below ground (BS 8102:2009) the use of cavity drain membranes has become the most popular form of structural waterproofing in the UK. Wykamol systems can easily deal with aggressive ground water conditions, where basements are liable to flooding, or indeed where simple dampness, contamination or salting problems are prevalent.
All major credit cards accepted.
CM8 Wykamol CM8 is a cavity drain membrane and is manufactured from high density polyethylene (PEH). It is impermeable and resistant to the usual chemicals in the building construction. • High density polyethylene with moulded compression studs. • Compression (maximum): 120 kN/mÇ. • Suitable for basement walls or floors with active water penetration.
PRODUCT CODE: CM8 - ROLL SIZE 42m2
Colour: Blue
Roll Size: 2.05m x 20m
KONTRACT 8 This membrane is used on both wall and floors with an "air gap" of 5.3 Litres of space per m2 with high compressive strength. Available in 2m x 20m (40m2), and 2.4m x 20m (48m2),, this membrane is used for light water ingress situations.
• High density polyethylene with moulded compression studs. • Compression (maximum): 120 kN/mÇ. • Suitable for basement walls or floors with active water penetration.
PRODUCT CODE: K8 2 X 20 - ROLL SIZE 40m2 PRODUCT CODE: K8 2.4 X 20C - ROLL SIZE 48m2
Colour: Clear Colour: Clear
Roll Size: 2m x 20m Roll Size: 2.4m x 20m
tel: 0845 400 66 66
35
36
www.wykamol.com - salesdepartment@wykamol.com
KONTRACT MESH Dimpled sheeting with plastic mesh welded on, suitable as a dampproof base for plaster or shotcrete, e.g., as a seepage layer in tunnel construction, or for repairing basements internally. • Water entering through walls is contained behind membranes and directed to drainage at base of wall. • Suitable to provide Type C drained protection to Grade 3 or Grade 4 environment for residential or commercial use, in conjunction with adequate heating and ventilation. • Requires sump and pump or equivalent passive water disposal system. (Sumps and pumps specified separately).
PRODUCT CODE: KMESH 2X10 - ROLL SIZE 20m2 PRODUCT CODE: KMESH 2X20 - ROLL SIZE 40m2
Colour: Clear Colour: Clear
Roll Size: 2m x 10m Roll Size: 2m x 20m
SLIMLINE MESH Dimpled sheeting with plastic mesh welded on, suitable as a dampproof base for plaster or shotcrete, e.g., as a seepage layer in tunnel construction, or for repairing basements internally. • Suitable for applied plaster finish or plasterboard on adhesive dabs. • Water entering through walls is contained behind membranes and directed to drainage at base of wall. • Suitable to provide Type C drained protection to Grade 3 or Grade 4 environment for residential or commercial use, in conjunction with adequate heating and ventilation. • Requires sump and pump or equivalent passive water disposal system. (Sumps and pumps specified separately).
PRODUCT CODE: KMESHYELL ROLL SIZE 30m2 PRODUCT CODE: KMESHYELL2 ROLL SIZE 60m2 Colour: Yellow Colour: Yellow
Roll Size: 1m x 30m Roll Size: 2m x 30m
All major credit cards accepted.
CM PLASTER Wykamol CM Plaster is a clear, high-density polyethylene (HDPE) membrane, moulded to form undercut studs, which act as a key to subsequently applied plaster or render.
PRODUCT CODE: CMPLASTER - ROLL SIZE 40m2 Colour: Green
Roll Size: 2m x 20m
K 20 Dimpled sheeting with particularly high drainage capacity, suitable for high performance see page layers in building and civil engineering construction. Also for waterproofing floors in refurbishment projects.
PRODUCT CODE: K20 - ROLL SIZE 40m2 Colour: Black
Roll Size: 2m x 20m
CM FLOOR A low profile membrane (3mm) specially designed for fast-track sealing of damp concrete at ground level - no need for extensive surface preparation normally required with liquid DPM systems (epoxies etc) and no curing times before floor finishes can be applied.
PRODUCT CODE: CMFLOOR - ROLL SIZE 42m2 Colour: Black
Roll Size: 2.07m x 20m
WYKAMOL SLIMLINE Wykamol slimline is a tough polypropylene cavity drainage membrane embossed with an "X" pattern of grooves. These grooves allow moisture to move behind the membrane and allow for shrinkage movement when screeds are laid on top. One common application is damp concrete floors.
PRODUCT CODE: WYKSLIM - ROLL SIZE 40m2 Colour: Charcoal
Roll Size: 2m x 20m
tel: 0845 400 66 66
37
38
www.wykamol.com - salesdepartment@wykamol.com
KONTRACT GEOTEXTILE Dimpled sheeting with integral separating membrane and welded-ongeotextile as a compact protection and drainage system for EXTERNAL waterproofing in NEWBUILD construction. Installation depth up to 10m
PRODUCT CODE: KGEOTEXT - ROLL SIZE 40m2 Colour: Black
Roll Size: 2m x 20m
PROFILE STRIP FOR GEOTEXTILE A profile strip which acts as a capping detail for Wykamol Geotextile membrane. This stops any water from getting behind the membrane at ground level.
PRODUCT CODE: PROFILESTRIP2 Colour: Black
Pack Size: 2 Metre Length
THERMOSEAL A versatile and economic thermal insulating cavity drain membrane. Low stud height (4 mm) but high thermal resistance allows spaceefficient lining of basement walls not subject to extreme water ingress.
PRODUCT CODE: THERM - ROLL SIZE 67.5m2 Colour: Sliver
Pack Size: 1.35 x 50
All major credit cards accepted.
Tomorrow’s foundation waterproofing …today! The next generation of foundation waterproofing is here Triple-layer membrane system…works with all foundations – including ICF – right down to 10metres below Quicker…cleaner…less prep…it can even be tested in situ before backfilling Geotex from Wykamol
Wykamol Group Unit 3, Boran Court, Network 65 Business Park, Hapton, Burnley, Lancashire BB11 5TH
tel: 0845 400 66 66 t: +44 (0)845 400 66 66 www.Wykamol.com e: sales@Wykamol.com
40
www.wykamol.com - salesdepartment@wykamol.com
Plugs and Tapes The most important part of any membrane system, is the fixings and jointing tapes this part of the system is critical and Wykamol are pleased to announce their systems are covered by BBA accreditation. The highest quality bitumen along with the extensive water testing that has been carried out.
Our plaster plugs and brick plugs are also of the highest quality, and now include the new plugs with seals already attached to speed up installation times. For poor quality construction, we have the Wykamol cob plug, which can be installed into all types of masonry to enable good fixing. Wykamol are confident that you will have all the confidence in the products that we supply.
SUREFIX BRICK PLUGS Wykamol surefix are 10mm fixings to use with membrane systems, they have a re-inforced head for easy use and take a size 10 screw into the head of the plug. for battens or metal framing systems 60mm long these plugs will fit into all substrates.
PRODUCT CODE: SUREFIXPLUG Colour: Green
Size: 10 x 60mm
Box Qty: 100
SUREFIX BRICK PLUGS WITH SEALS Wykamol superplugs are 10mm fixings to use with membrane systems, with the advantage of a rubber seal already attached they have a reinforced head for easy use and take a size 10 screw into the head of the plug, for battens or metal framing systems 60mm long these plugs will fit into all substrates.
PRODUCT CODE: SUREFIXSEAL Colour: Green
Size: 10 x 60mm
Bag Qty: 200
CM PLASTER PLUGS These plaster plugs can be used with our mesh membrane systems, they are available in 75mm and 50mm lengths they have a serrated head which can take plaster or dot and dab. They can also be used to secure membranes to walls in systems where a free standing frame is to be used.
PRODUCT CODE: CMPLASPLG Colour: White Size: 8 x 50mm - 8 x 70mm
All major credit cards accepted.
Box Qty: 250
CM PLASTER PLUGS WITH SEALS These plaster plugs can be used with our mesh membrane systems, they are available in 75mm and 50mm lengths and have the advantage of a seal already attached. They have a serrated head which can take plaster or dot and dab. They can also be used to secure membranes to walls in systems where a free standing frame is to be used.
PRODUCT CODE: CMPLASTERSEAL Colour: White
Size: 8 x 70mm
Bag Qty: 200
PLUGS SEALS A neoprene seal to go over the head of the plaster plug and brick plug to form a water proof seal when used in conjunction with membrane systems.
PRODUCT CODE: WYKPLUGSEAL Colour: Black
Bag Qty: 100
COB PLUGS These plugs are ideal to use where substrates will not take a normal fixing, ideal for cob construction as well as all other masonry types. They have a pin which is driven down the head of the plug to give a secure anchor for membrane systems.
PRODUCT CODE: COB10/60 PRODUCT CODE: COB10/90 PRODUCT CODE: COB10/110 Colour: White
Box Qty: 200
tel: 0845 400 66 66
41
42
www.wykamol.com - salesdepartment@wykamol.com
WYKAMOL TAPE A high quality butyl double sided tape 28mm wide this tape is used in the installation of Wykamol cavity drain membranes and is used to tape 2 sheets of membrane together on walls or floors. Easy to use and very high quality HP600 grade make this a long term solution for all membrane work.
PRODUCT CODE: WYKTAPE Colour: Black
Size: 28mm x 2mm x 22.5m
Box Qty: 1
WYKAMOL ROPE A 10mm bead of butyl rope this rope is used to either wrap around the head of plugs in membrane installation, or to form a jointing waterproof seal on walls and floor membrane systems. This is a high quality rope and is covered by our BBA Certificate.
PRODUCT CODE: WYKROPE Colour: Black
Size: 10mm x 5m
Box Qty: 1
WYKAMOL CORNER Our biggest selling tape, this 150mm wide tape has multi uses, but is mostly used to seal membrane from walls to floors and the channel system. Tacky on one side only this can also be used to overtape external joints, and can also be used on floor oversealing.
PRODUCT CODE: WYKCSTRIP PRODUCT CODE: WYKCSTRIP20 Colour: Black Colour: Black
Size: 12m x 150mm Size: 20m x 150mm
Box Qty: 1 Box Qty: 1
WYKAMOL OVERSEAL This is a 75mm overseal tape used to overseal membrane systems , it can be used on walls and floors and forms a overseal detail to form a vapour barrier and waterproof seal on external taped joints. Covered by our BBA Certificate.
PRODUCT CODE: WYKOVER Colour: Black
Size: 75mm x 22.5m
All major credit cards accepted.
Box Qty: 1
WYKAMOL FOIL TAPE Wykamol foil tape is used to join two separate sheets of Wykamol thermoseal, and has excellent adhesive qualities.
PRODUCT CODE: FOIL
Colour: Sliver
Size: 72mm x 50m
Box Qty: 1
WYKAMOL FIBRE TAPE Wykamol fibre tape is used to form a joint detail between cm plaster membrane also slimline mesh that can be plastered onto or dot and dab fixing, the fibres take most plaster types and form an excellent detail on joints.
PRODUCT CODE: WYKFIBRE Colour: Black
Size: 115mm x 25m
Box Qty: 1
tel: 0845 400 66 66
43
44
www.wykamol.com - salesdepartment@wykamol.com
Drainage solutions & battery backups When installing Wykamol Cavity Drainage membranes careful attention must be given to provide a suitable drainage solution. Natural drainage is not normally possible or convenient in below ground situations, so mechanical drainage must be used. Wykamol offer a large range of pumps for the control of water movement and can supply everything the contractor needs for flooded basements.
In certain instances a more powerful pump maybe required (greater height pumping capability) or a 2nd pump is required as a back up in case the first one fails. Wykamol can advise the contractor in this instance what the correct pump would be for these situations.
WYKAMOL SUMP KIT The Sump kit is a ready to use complete water control system principally designed for use in below ground structures to control water ingress. The Sump kit system can be used for all basement conversions.
PRODUCT CODE: SUMPKIT Colour: Black
Dimensions: 600mm x 500m
YELLOW SUMP KIT Our top of the range sump system, built with an internal shelf to house 2 pumps if necessary, the unit has a extra thick 6mm wall, to stop any crushing when concreting in. Inlets can be positioned anywhere on the 4 flat faces of the system, multi-purpose unit that is the key.
PRODUCT CODE: SUMPFLO Colour: Yellow
Dimensions: 600mm x 600m
SUMP SEALS The Wykamol sumps seals are 110mm and 50mm and are designed to give a sealed connection to the Wykamol sump flo chamberThese are easy to install and give a greater performance
PRODUCT CODE: SUMPSEAL110 / SUMPSEAL50 Colour: Yellow
Dimensions: 600mm x 600m
All major credit cards accepted.
YELLOW SUMP KIT - DOUBLE Twin pumping station, our top of the range sump system, built with a internal shelf to house 2 pumps if necessary, the unit has a extra thick 6mm wall, to stop any crushing when concreting in. Inlets can be positioned anywhere on the 4 flat faces of the system, multi-purpose unit that is the key.
PRODUCT CODE: SUMPDOUBLE Colour: Yellow
Dimensions: 600mm x 600m
POWERGUARD The PowerGuard™ is a specially designed control panel for single pump system. The panel comes supplied with 3no. Float Switches for complete control of the pump including a visual\audio high level alarm. The panel also contains a 12v trickled charged battery which will power the alarm in the event of mains supply failure
PRODUCT CODE: POWERGUARD Colour: Yellow
Dimensions: 600mm x 600m
POWERGUARD TWIN The PowerGuard™ Twin™ is a specially designed control panel for twin pumps system. The panel comes supplied with 3no. Float Switches for complete control of the pumps including a visual\audio high level alarm. The panel also contains a 12v trickled charged battery which will power the alarm in the event of main supply failure
PRODUCT CODE: POWERGUARDT Colour: Yellow
Dimensions: 600mm x 600m
SUMPGUARD Sumpguard has been designed to monitor automatic sump pumps, It is wired in the power line to the pump, it also has the option to add a high level water alarm indicator. Also a built in alarm relay, that can be used to signal a home automation system, house alarm or remote dialer.
PRODUCT CODE: SUMPTELE
tel: 0845 400 66 66
45
46
www.wykamol.com - salesdepartment@wykamol.com
ALARM ONLY A battery alarm which is included in the sump kits free of charge but is available separately. Care must be taken with this unit to make sure the battery is changed regularly.
PRODUCT CODE: SUMPALARM
HIGH LEVEL ALARM MINI A heavy duty powered alarm which can be extended to fit anywhere in the house for optimum use. This unit should be wall mounted and will notify clients of a possible high water level.
PRODUCT CODE: SUMPHLA
HIGH LEVEL ALARM MAXI Top of the range alarm system, being powered and battery back up, if a loss of power happens the internal battery system will still operate a heavy duty powered alarm which can be extended to fit anywhere in the house for optimum use. This unit should be wall mounted and will notify clients of a possible high water level.
PRODUCT CODE: SUMPHLAMAXI
KSB PUMP 301 7 metre head and 130 litres a minute pumping capacity. The KSB AmaDrainer is a Submersible Waste Water Pump. Used for Automatic drainage of sumps, pits, shafts, yards and cellars subject to a flooding risk. Lowering the surface water level, this pump is our standard pump in all our sump systems.
PRODUCT CODE: PUMPONLY3
All major credit cards accepted.
GOLIATH PUMP (SUPER) The goliath is a powerful pump offering 180 litres per minute pumping capacity with the benefit of an internal float arm. This pump can be installed in tighter spaces due to an internal float mechanism.
PRODUCT CODE: PUMPONLY2 Colour: Black
AMA DRAINER 303 12 metre head and 240 litres a minute pumping capacity. The KSB AmaDrainer 303 is a Submersible Waste Water Pump. Used for Automatic drainage of sumps, pits, shafts, yards and cellars subject to a flooding risk. Lowering the surface water level, this pump is our upgraded model and offers a more powerful delivery.
PRODUCT CODE: PUMPONLY4 Colour: Yellow
BATTERY BACK UP KIT The powerflo battery back-up system is designed especially for circumstances where the possibility of primary pump failure through either a pump fault or loss of mains power would be catastrophic. The system comprises of a control panel, 24V back-up pump, 3 no. float switches, non-return valve and an IP 66 rated junction box.
PRODUCT CODE: POWERFLO
SERVER BATTERY BACK-UP (UPS) This battery back up system, has been designed for ease of use and works simply by wiring the mains pump into the server unit, in the event of a power failure the main units heavy duty battery will keep the pumps going for a long period of time, this system is quick and easy to install.
PRODUCT CODE: BATBACK Colour: Black
tel: 0845 400 66 66
47
48
www.wykamol.com - salesdepartment@wykamol.com
FLOOR DRAIN Floor drain is a flangeless channel similar to waterguard , for controlling water movement to a sump chamber or drain, it has the benefits of no up stand which is ideal where stepped foundation footings would cause a problem , also the channel can also be used to drain across a floor centrally
PRODUCT CODE: FDCHANNEL Colour: Grey
Size: 2.2 Metre Lengths
FLOOR DRAIN OUTLET This 60mm outlet slots into the floordrain and benefits from bigger water capacity movement to the sump chamber or drain. It has a hinged top for easy cleaning and access
PRODUCT CODE: FDOUTLET Colour: Grey
FLOOR DRAIN JETTING EYE This new design jetting eye can be slotted in via the channel and also with the benefit of the new corner sections can be easily taken around corners , it has a adjustable height also
PRODUCT CODE: FDJETEYE Colour: Grey
CORNER SECTIONS The drain end connector can be used to take water away through an external wall to lower level drainage ideal for houses built into a hill side where lower drainage is possible. This comes with either a left return or right return depending on where it is to be sited.
PRODUCT CODE: DRAINENDL OR DRAINENDR Colour: Grey
All major credit cards accepted.
WATERGUARD - 2.2 METRE Wykamol Waterguard is a P.V.C drainage conduit designed for the control of water ingress in below ground situations. Wykamol Waterguard is fitted around the perimeter of the floor at the vulnerable wall/floor junction.
PRODUCT CODE: WATERGUARD Colour: Grey
Size: 2.2Metre
WATERGUARD DRAINAGE OUTLET The drainage outlet can be used to get water from the channels to the sump chamber or existing drain. The angle bend on the underside of the channel takes water through a 32mm connection.
PRODUCT CODE: DRAINOUT Colour: Grey
WATERGUARD JETTING EYE Jetting eyes and channel to sump connectors can also be fitted into the perimeter Aqua Channel drainage system to enable the Aquachannel to be cleaned periodically if necessary.
PRODUCT CODE: JETEYE Colour: Grey
WATERGUARD DRAIN END (LEFT OR RIGHT) The drain end connector can be used to take water away through an external wall to lower level drainage ideal for houses built into a hill side where lower drainage is possible. This comes with either a left return or right return depending on where it is to be sited.
PRODUCT CODE: DRAINENDL OR DRAINENDR Colour: Grey
tel: 0845 400 66 66
49
50
www.wykamol.com - salesdepartment@wykamol.com
AQUA DRAIN - 25M Aquadrain is a drainage channel which acts as a perimeter conduit bedded in at the wall/floor angle. Where appropriate, it can be laid under the slab to take ground water to a sump or soak away, and reduce floatation pressures from baring on the slab.
PRODUCT CODE: AQUADRAIN Colour: Blue
Cementitious waterproofing The Wykamol group manufacture a range of cementitous tanking products, included in these are Hydradry and Aquastop suitable for waterproofing cellars boiler rooms and all suitable masonry and concrete structures below ground, Hydradry can resists hydrostatic pressure up to 5 metres head, and is suitable for use on saturated substrates’ and potable water.
Wykamol Fillet seal provides the perfect rapid curing none shrinking wall floor joint sealer to stop leaks at the most vulnerable area the wall floor construction joint. With a track record of success and performance. The Wykamol range of structural waterproofing products will provide the ultimate solution to your tanking problems.
Hydraplug is a fast setting water plugs designed to stop active leaks instantly.
All major credit cards accepted.
HYDRADRY TANKING 25 KG Wykamol HydraDRY is a cementitious compound designed for application to the internal surfaces of walls and the associated solid floors of cellars, basements and other areas below ground level and subject to penetrating dampness.
PRODUCT CODE: HYDRA Colour: Grey
Pack Size: 25 Kg
HYDRAPLUG 5 KG Wykamol HydraPLUG is a cementitious quick-setting compound which is mixed with water and applied as a putty. It can be used to provide anchor sites for wall fixings and to stop active water leaks.
PRODUCT CODE: HYPLUG
Colour: Grey
Pack Size: 5 Kg
AQUASTOP TANKING GREY 25 KG Aquastop Tanking is a slurry applied treatment used in the control of lateral penetration of water in walls below ground level. Aquastop Tanking is not sulphate resisting.
PRODUCT CODE: TANKGREY Colour: Grey
Pack Size: 25kg
FILLET SEAL MORTAR 25 KG Fillet seal mortar is a cement based, rapid curing non shrink hydraulic setting powder. Used at points of stress i.e. wall/floorl junction and applied normally by trowel.
PRODUCT CODE: WYKFILLET
Colour: Grey
Pack Size: 25 Kg
tel: 0845 400 66 66
51
52
www.wykamol.com - salesdepartment@wykamol.com
Sewage Systems The Magna™ systems are a range of fully automatic packaged pumping stations specifically designed for pumping foul and waste water when gravity drainage is not possible or economical to install.
The systems are suitable for installing either at the initial building stage or retro fitting to existing buildings and can accept waste from a whole host of applications (WC, basin, sink, washing machines etc.).
POWERFLUSH MACERATOR The Powerflush™ is a fully automatic macerator suitable for pumping waste from a complete bathroom to a higher level when gravity drainage is not possible or economical to install.
PRODUCT CODE: POWERFLUSH Colour: White
AQUAFLUSH WASTER WATER PUMP The AquaFlush™ is a fully automatic pumping system specifically designed for pumping grey water when gravity drainage is not possible or economical to install.
PRODUCT CODE: AQUAFLUSH Colour: White
All major credit cards accepted.
DRAINFLO 150 SEWAGE SYSTEM A fully automatic packaged pumping station specifically designed for pumping foul and waste water when gravity drainage is not possible or economical to install. 150 litre storage capacity, complete with 50mm outlet pump.
PRODUCT CODE: DRAINFLO150 Colour: White
DRAINFLO 200 SEWAGE SYSTEM A fully automatic packaged pumping station specifically designed for pumping foul and waste water when gravity drainage is not possible or economical to install. 200 litre storage capacity, complete with 63mm outlet pump.
PRODUCT CODE: DRAINFLO200 Colour: White
DRAINFLO 360 SEWAGE SYSTEM A fully automatic packaged pumping station specifically designed for pumping foul and waste water when gravity drainage is not possible or economical to install. 360 litre storage capacity (depending on inlet level), complete with 2� outlet pump.
PRODUCT CODE: DRAINFLO Colour: White
DRAINFLO 360 TWIN PUMP SYSTEM A fully automatic packaged pumping station specifically designed for pumping foul and waste water when gravity drainage is not possible or economical to install. 360 litre storage capacity (depending on inlet level), complete with 2� outlet pumps.
PRODUCT CODE: DRAINFLOTWIN Colour: White
tel: 0845 400 66 66
53
54
www.wykamol.com - salesdepartment@wykamol.com
MAGNA 900 SINGLE The system consists of a polyethylene tank, locking access cover, internal pipe work & fittings, control panel (if applicable), float switch/es and one or two submersible pumps. Specifically designed for pumping foul and waste water when gravity drainage is not possible or economical to install.
PRODUCT CODE: DRAINFLO900 Colour: White
MAGNA 900 DOUBLE The systems consists of a polyethylene tank, locking access cover, internal pipe work & fittings, control panel (if applicable), float switch/es and one or two submersible pumps. Specifically designed for pumping foul and waste water when gravity drainage is not possible or economical to install.
PRODUCT CODE: DRAINFLO900TWIN Colour: White
MAGNA 2000 SINGLE The systems consists of a polyethylene tank, locking access cover, internal pipe work & fittings, control panel (if applicable), float switch/es and one submersible pumps. Specifically designed for pumping foul and waste water when gravity drainage is not possible or economical to install.
PRODUCT CODE: DRAINFLO2000 Colour: White
MAGNA 2000 DOUBLE The systems consists of a polyethylene tank, locking access cover, internal pipe work & fittings, control panel (if applicable), float switch/es and two submersible pumps. Specifically designed for pumping foul and waste water when gravity drainage is not possible or economical to install.
PRODUCT CODE: DRAINFLO2000TWIN Colour: White
All major credit cards accepted.
Coverage Rates Cementitious Waterproofing Hydradry Tanking
25 Kg
~ 3 Kg / m2 / Coat. 2 Coats recommended.
Hydraplug
5 Kg
---
Aquastop Tanking Grey
25 Kg
Surface Type
Fillet Seal Mortar
25 Kg
1st Coat
2nd Coat
Coarse Surface (internal)
2.0
Kg/m2
2.0 Kg/m2
Smooth Surface (internal)
1.5 Kg/m2
1.5 Kg/m2
External
1.5 Kg/m2
1.5 Kg/m2
Applied at a rate of 15 - 20 linear m / 25 Kg bag. Subject to site conditions and requirements.
The Powerflush™ is a fully automatic macerator suitable for pumping waste from a complete bathroom to a higher level when gravity drainage is not possible or economical to install.
tel: 0845 400 66 66
55