4 minute read
Spot Weld Drills
Fraising Bits
For the precise removal of welding spots without drilling through the "good" side of the sheet metal. Made of very hard cobalt steel HSCo. .
Diameter Model Article no.
1 spot weld fraiser 5 fraising bits HSCo 1 swivel joint 1 mini lubricator 1 hex. key to exchange fraiser 1 tool box
8,0 mm 78F 8951011524
Set 6451 consisting of:
6450 8951011524 DG1 G1K 8 mm fraiser bit counter arm swivels fraising bit is approached
Like model 6452, but here the fraising bit is pushed automatically onto the sheet metal (pneumatic piston) and the counter arm is fixed (only swivels). 2
Model Article no.
spot weld fraiser counter arm 75 mm counter arm 140 mm
(fits only this tool, not the other fraisers) 6453 8951076013 6453GH75 8951011525 6453GH140 8951011526
1 8 mm fraiser
Precisely adjustable fraising depth (50 μm) in order not to drill into the remaining sheet metal part. For welding spots, delivered with silencer and fraiser (model 78F see box on left).
Model Article no.
spot weld drill Set
6450 8951076012 6451 8951176000
Model Fraiser bit Speed Weight Inner hose diameter Dimension a x b x c Air Consumption average Air inlet Duty level Noise LpA Vibration
[mm] [Rpm] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²]
Ø 8 model 78 F
Ø 8 model 78 F
6450 1800 1.3 8 270x160x33 110 240 1/4" IG 1 78.6 4.17 6453 2000 1.15* 8 285x215x75 110 240 1/4" IG 2 88.8 < 2.5 6301 22x12x1.2 / Ø 5 x 1.2 - 1.0 8 245x54 2 70.6 3.97
max. pressure 6.3 bar (90 psi), IG: female thread, *without counter arm norms applied : noise according to ISO15744 (KPA=KWA=1,7 dB), vibration 3-axis according to ISO28927-1, for LwA-values see page 69.
Much less tiring to work with than manual tools. For preparation of up to 1.2 mm sheet metal parts for car body or aluminium before welding. Punch diameter 5 mm for spot welding. Equipped with air-hydraulic multiplier system. 2 2 in 1: punching and welting tool
Model Article no. punching / welting tool 6301 8951076011
Model Tool Speed Weight Inner hose diameter Dimension a x b x c Air consumption average Air inlet Duty level Noise LpA Vibration
Spiral Hoses
Handy blind riveters with collection container for tornoff rivet pins. Durable air-hydraulic force multiplying system and hanger for use with balancers. Model 6700 with 4 different sizes of mouthpieces / Model 6710 with swivel air connector, 6 different sizes of mouthpieces and 2 additional sets of extra hardened jaws for replacement in order to allow an optimum adaptation to differently thick rivet pins. 2
Rivet Size Model Article no.
to 5 mm to 6,4 mm
6700 8951074001 6710 8951074002
3
Our high quality polyurethane spiral hoses with straight ends are excellently suited for use with screwdrivers in combination with our balancers. Due to their low resistance to the pulling force and their small diameter of the spiral they are very practical and comfortable to use. See page 66
Balancers
In order to design an ergonomic and efficient work place especially the straight screwdrivers often require to be equipped with balancers in combination with spiral hoses with straight ends or with hose balancers See page 62
up to 6,4 mm Standard (steel ...)
low net weight up to 4.8 mm steel (standard rivets) up to 6.4 mm steel (standard rivets)
Robust riveter with soft rubber coated handle and easy to maintenance construction. Well suited for an ergonomic work place design with balancer that is attached to the hanger on the tool. With large transparent rivet pin container offering sufficient room for long undisturbed work. With 4 different sizes of mouth pieces and one set of extra hardened jaws for replacement in order to allow an optimum adaptation to differently thick rivet pins.
High quality riveters with rivet pin extraction (adjustable / can be switched off) and transparent rivet pin collector. Two-finger trigger for easier operation and ON/OFF-switch (for permanently connected tools). Ergonomic due to the large silencer, the cold-insulating handle material and the hanger. Always full stroke and power due to service-friendly hydraulic system. Including 2 additional sets of jaws, 1 additional jaw case, hydraulic oil in a bottle, several keys for adjustment/adaptation, mouthpieces of various sizes, rivet pin extraction tube (only for model 6718Xi). Model Article no. 6715 8951074003 3 3
Rivet Size Model Article no.
