1776-yr48179-pml2750 12-SEP-14 12:46:46
PRINT DIRECTION
India RIPPLE
KG FOR HEAVY LOADS
INJECT ION
India
TEC H NIQ U E
Ripple P Fix
TM
Installation Parameters Anchor Ø
Drill Hole Ø
Embedment Depth (std)
Torque Moment
Characteristic Load
M8 M10
10 mm 12 mm
80 mm 90 mm
10 Nm 20 Nm
17 kN 22 kN 37 kN
Multi-Purpose Polyester
Styrene Free Chemical Anchoring System
M12
14 mm
110 mm
40 Nm
M16
18 mm
128 mm
80 Nm
57 kN
M20
22 mm
170 mm
150 Nm
85 kN
M24
26 mm
210 mm
200 Nm
118 kN
Gelling and curing times
Installation Procedure
CONCRETE
1776-yr48179-pml2750 12-SEP-14 12:46:46
3 5
2 4 6
1
ETA
Application Temp.
Gel Time
+10 to +20°C
15 minutes
5 hours
+20 to +25°C
10 minutes
145 minutes
+25 to +30°C
7.5 minutes
85 minutes
+30 to +35°C
5.0 minutes
50 minutes
+35 to +40°C +40 to +45°C +45°C
3.5 minutes 2.5 minutes 2.5 minutes
40 minutes 35 minutes 12 minutes
European Technical Assessment ETAG 001 Parts 1 & 5 Option 7
x2 7
ND
F
VER
ITION
S
MASONRY
OR
165.000
Anchoring in concrete ETA-14/0295
Y
HOT CO
PRINT DIRECTION
LEED TESTED
R IP PL E
Ripple P Fix
India
T ECH NIQUE
Ripple P Fix DRY WET &
PART A – Resin: DANGER. Contains: Contains Vinyl Toluene CAS No 25013-15-4. Hazards: H226 Flammable liquid and vapour. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H319 Causes serious eye irritation. Precautions: P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish. P501 Dispose of contents/container in accordance with national regulations.
India
I N J ECT I O N
FLOODED HOLES
TM
OVERHEAD Applications
Anchor Drill Hole Galvanized and Stainless Steel Ø Ø
• Multi-purpose and high performance M8 anchoring system for use in M10 concrete, masonry and other substrates M12 • For use at temperatures of up to 45°C M16 • Applications in dry wet & flooded M20 holes Anchoring System • Reduced drilling diameters M24 • Increased nozzle life Installation Procedure
10 mm 12 mm 18 mm
128 mm
26 mm
Expiry:210 mm Batch:Gelling
3 5
7
ND
F
VER
ITION
S
OR Y
HOT CO
x2 8*
LEED TESTED
118 kN
and curing times Gel Time
+10 to +20°C
15 minutes
5 hours
+20 to +25°C
10 minutes
145 minutes
+25 to +30°C
7.5 minutes
85 minutes
+30 to +35°C
5.0 minutes
50 minutes
+35 to +40°C +40 to +45°C +45°C
3.5 minutes 2.5 minutes 2.5 minutes
40 minutes 35 minutes 12 minutes
x2
190.000 9
Load Time
PART A – Resin: DANGER. Contains: Contains Vinyl Toluene CAS No 25013-15-4. Hazards: H226 Flammable liquid and vapour. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H319 Causes serious eye irritation. Precautions: P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish. P501 Dispose of contents/container in accordance with national regulations.
• Multi-purpose and high performance
More Information
cutter
Black
Yellow
Magenta
Cyan
8* - Note: For hollow substrates use in combination with perforated sleeve and fill 100% with resin.
Galvanized and Stainless Steel
Made in UK
Store in original and unopened packaging, the correct way up and in cool and dry conditions between +5°C and +25°C. Do not expose to sunlight.
MIN 50% Ripple P Fix
200 Nm
57 kN 85 kN
Application Temp.
European Technical Assessment ETAG 001 Parts 1 & 5 Option 7 Anchoring in concrete ETA-14/0295
80 Nm
www.rippleindia.in 170 mm 150 Nm
22 mm
2 4 6
1
mm 20Pvt. NmLtd. 303-304, 22 kNArcadia, Above SBI Bank, Balkampet, Ripple 90 Construction Products Royal S.R. Nagar, Hyderabad - 50040 038, 110 mm NmTelangana, India. 37Tel: kN+91 40 400 40 707.
14 mm
Content: 410 ml
ETA
PART B - Hardener. WARNING. Contains: Benzoyl Peroxide CAS No 94-36-0. Hazards: H242 Heating may cause a fire. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H400 Very toxic to aquatic life. H412 Harmful to aquatic life with long lasting effects. Precautions: P273 Avoid Torque release to the environment. P280 Wear Embedment Characteristic protective gloves/protective clothing/eye protection/face protection. Depth IF (std) Moment Load P302+P352 ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P411 Store at temperatures not 80 mm Nm of contents/container 17 kN in accordance with national regulations. exceeding 25°C/77°F. P501 10 Dispose
Installation Parameters
Multi-Purpose Polyester
Styrene Free Chemical
Store in original and unopened packaging, the correct way up and in cool and dry conditions between +5°C and +25°C. Do not expose to sunlight.
8* - Note: For hollow substrates use in combination with perforated sleeve and fill 100% with resin.
c
SLOW GEL FAST CURE
9
MIN 50%
THREADED BARS & REBARS
G
8*
x2
Load Time
PART B - Hardener. WARNING. Contains: Benzoyl Peroxide CAS No 94-36-0. Hazards: H242 Heating may cause a fire. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H400 Very toxic to aquatic life. H412 Harmful to aquatic life with long lasting effects. Precautions: P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P411 Store at temperatures not exceeding 25°C/77°F. P501 Dispose of contents/container in accordance with national regulations.
TM
TM
I n d i aI n d i a
e P Fix
TM
Anchor Ø
Drill Hole Ø
Embedment Depth (std)
Torque Moment
Characteristic Load
M8 M10
10 mm 12 mm
80 mm 90 mm
10 Nm 20 Nm
17 kN 22 kN 37 kN
pose Polyester
mical Anchoring System
M12
14 mm
110 mm
40 Nm
M16
18 mm
128 mm
80 Nm
57 kN
M20
22 mm
170 mm
150 Nm
85 kN
M24
26 mm
210 mm
200 Nm
118 kN
Gelling and curing times
Installation Procedure 3 5
2 4 6
1
ETA European Technical Assessment ETAG 001 Parts 1 & 5 Option 7 Anchoring in concrete ETA-14/0295
x2 7
8*
LEED TESTED
x2 9
Application Temp.
Gel Time
+10 to +20°C
15 minutes
5 hours
+20 to +25°C
10 minutes
145 minutes
+25 to +30°C
7.5 minutes
85 minutes
+30 to +35°C
5.0 minutes
50 minutes
+35 to +40°C +40 to +45°C +45°C
3.5 minutes 2.5 minutes 2.5 minutes
40 minutes 35 minutes 12 minutes
Load Time
Store in original and unopened packaging, the correct way up and in cool and dry conditions between +5°C and +25°C. Do not expose to sunlight.
MIN 50% 8* - Note: For hollow substrates use in combination with perforated sleeve and fill 100% with resin.
Ripple P Fix
PART A – Resin: DANGER. Contains: Contains Vinyl Toluene CAS No 25013-15-4. Hazards: H226 Flammable liquid and vapour. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H319 Causes serious eye irritation. Precautions: P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish. P501 Dispose of contents/container in accordance with national regulations. PART B - Hardener. WARNING. Contains: Benzoyl Peroxide CAS No 94-36-0. Hazards: H242 Heating may cause a fire. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H400 Very toxic to aquatic life. H412 Harmful to aquatic life with long lasting effects. Precautions: P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P411 Store at temperatures not exceeding 25°C/77°F. P501 Dispose of contents/container in accordance with national regulations.
Galvanized and Stainless Steel
and high performance tem for use in concrete, other substrates mperatures of up to 45°C n dry wet & flooded holes ng diameters zle life
Ripple Construction Products Pvt. Ltd. 303-304, Royal Arcadia, Above SBI Bank, Balkampet, S.R. Nagar, Hyderabad - 500 038, Telangana, India. Tel: +91 40 400 40 707.
www.rippleindia.in Expiry: Batch:
nt: 410 ml
Made in UK
More Information
190.000
cutter
Black
Yellow
Magenta
Cyan 1
3
2
5
4
7
6
8
9
Fill min 2/3 rd
x2
x2
x2
x2
x2
TM
India
TM
India
TM
India