Protocol product line by BullDog Communications

oc o ot Pr

ucts Powe l Prod red

By ...

InnerCrete Th e

Me o gy m br ane Technol

Ev olu

tion

tec of Concrete Pro

PRODUCT OVERVIEW

InnerCrete

n ti o

Th e

Me o gy m br ane Technol

Ev olu

tion

ti tec of Concrete Pro

Protocol Products Powered By ...

“Protecting Concrete from the Inside...Out” InnerCrete

InnerCrete

Me o gy m br ane Technol

Protocol Products - Environmentally Friendly, Sustainable Technologies Me mb ol T e

Ev olut

Products Powere c ol d

With InnerCrete™ Membrane Technology

o ot Pr

n tio ec rot io n o f P e t Concre By ...

InnerCrete

VersaGuard oc ot Pr

oducts Power ol P r ed

InnerCrete

...

Me o gy m br ane Technol

Ev olut

Me ogy mbr ane Technol eE n vo l tio u tio tec n of Concrete Pro

rot io n of Concrete P

DualGuard oc ot Pr

oducts Power ol P r ed

InnerCrete Th

n tio ec

...

Me ogy mbr ane Technol eE n vo l tio u tio tec n of Concrete Pro

Ev olu

gy rane Techn o

tion

ti tec of Concrete Pro

VersaGuard 42

PERMANENT, INTERNAL WATERPROOFING MEMBRANE w/ RETAINED SURFACE PROFILE Provides maximum concrete durability / protection for applications where surfaces may be painted / coated and optimal adhesion is required.

DualGuard 45

PERMANENT, INTERNAL WATERPROOFING MEMBRANE w/ SUPER SURFACE REPELLANT . Maximum concrete durability/protection with an added repellant for visual surface “beading”. Ideal replacement for traditional sealers.

UltraGuard 48 UltraGuard oc ot Pr

oducts Power ol P r ed

InnerCrete Th

...

Me ogy mbr ane Technol eE n vo l tio u tio tec n of Concrete Pro

InnerCrete

CLEAR, BREATHABLE, HIGH-PERFORMANCE, 100% silane sealer for protecting new & existing concrete surfaces from water, acids, chloride ions. Complies with Alberta DOT “B-388” Specification for Concrete Sealers Type “1C”

DeBOND 65 / AiA From the Makers of InnerCrete™ Membrane Technology

www.innercrete.com

InnerCrete

DeBOND

InnerCrete

v20130313

oc ot Pr

oducts Power ol P r ed

InnerCrete

...

Me ogy mbr ane Technol eE n vo l tio u tio tec n of Concrete Pro

LEAD AND ASBESTOS-BASED PAINT ENCAPSULATION AND REMOVAL/ ABATEMENT. INDUSTRIAL AND HIGH-PERFORMANCE PAINT/COATING REMOVAL. Effective for use on most substrates; brick, concrete, metal, holding tanks or other delicate facades.

DeRUST (Gel & Liquid) DeRUST oc ot Pr

oducts Power ol P r ed

InnerCrete Th

...

Me ogy mbr ane Technol eE n vo l tio u tio tec n of Concrete Pro

ACID-FREE RUST REMOVER FOR METALS; STEEL, IRON, STAINLESS, ALUMINUM, ALLOYS AND PAINTED METALS (will not remove the paint). Will NOT attack healthy metals. Contains a corrosion inhibitor to protect against future rust.

DeSEAL DeSEAL oc ot Pr

oducts Power ol P r ed

InnerCrete Th

...

Me ogy mbr ane Technol eE n vo l tio u tio tec n of Concrete Pro

REMOVES MOST SEALERS AND SURFACE FILMS OFF CONCRETE AND PAINT, VARNISHES AND LACQUERS OFF WOOD. Spray-on, wait and wash away means no damage to substrates from abrasive removal methods. Non-toxic and fully biodegradable.

WhiteAway 60 WhiteAway oc ot Pr

oducts Power ol P r ed

60 By

InnerCrete Th

...

Me ogy mbr ane Technol eE n vo l tio u tio tec n of Concrete Pro

EFFLORESCENCE REMOVER Dissolves efflorescence and removes ground-in dirt from concrete surfaces. Contains no hydrochloric (muriatic acid). Effectively cleans surfaces and in combination with VersaGuard or DualGuard, prevents future efflorescence from occurring.

WashAway 63 / WashAway Xtreme WashAway oc ot Pr

oducts Power ol P r ed

63 By

InnerCrete Th

...

Me ogy mbr ane Technol eE n vo l tio u tio tec n of Concrete Pro

CONCRETE CLEANER & SURFACE ETCHER, REPLACES MURIATIC ACID. A fullybiodegradable 2-in-1 product that effectively etches concrete/cementitious substrates for painting or coating. Also cleans & removes deeply embedded stains and dirt. Non-toxic & requires only water to neutralize before painting.

Protocol Concrete Protection Products and proprietary InnerCrete™ Membrane Technology developed and owned exclusively by Protocol Environmental Solutions Inc. Tel: (604) 464-0660 Toll Free: 1-877-464-0662

ucts Powe l Prod red

By ...

of Concrete Pro

VersaGuard 42

ion of r Concrete P

InnerCrete 42

Protocol Products Powered DualGuard By ... VersaGuard TM 45

InnerCrete InnerCrete

DualGuard 45

on Ev cti untreated e olutBare, untreated rBare, t o io n of concrete, Concrete P concrete,

brane Techn

InnerCrete

protection. Can & protection be painted or w surface coated. Hydrorepellency. static pressure Hydrostatic TM resistant. pressure Adhesion resistant. promoter for REPLACEMENT Me paint/coatings gyFOR SEALERS. m olo

Reduces routine

thaw impact. Better resistance to de-icing salt.

Inhibits cracking,

to de-icing salt.

Better substrate Better substrate InnerCrete durability. durability.

Yes

Biodegradable, Non Toxic Product

Yes

100-150

Low-pressure sprayer

TM TM

Ev olu

n/a

tion

Yes

Compliant

250-400

Spray

Yes

Compliant

80-100

Airless sprayer, Brush or Roll-on

Bond-breaking technology safe for delicate surfaces, effective in removing multiple layers & 2-part coatings. Eliminates abrasive removal methods.

first).

Concrete,

Yes

40-60 (gel)

Brush, roller, spray, dip tank

Will not attack healthy metal only attacks rust oxides. Safe for painted metal. Neutralized with water.

tanks.

Metal, painted

Mesteel, masonry, y m br logmetal surfaces. ane Techno Liquid DeRUST holding tanks. Ev ion cancbe olu Other delicate e t used in t tsubstrates o ion of r Con(test crete P dip/immersion

Improves durability, breathable, invisible when applied.

Reinforced concrete T structures.he

InnerCrete

exclusively by Protocol Environmental Solutions Inc. #105B 81 Golden Drive, Coquitlam, BC V3K 6R2 | 604-464-0660

InnerCrete

DeRUST

InnerCrete

DeRUST

on c ti e t o r of Copaints ncrete P Rust removal off Removes

n/a Me o gy m br ane Technol

DeBOND 65 / InnerCrete AiA

InnerCrete

DeBOND 65

Concrete protection and lead-based, metal & painted for bridges & industrial & other metal. Does not Protocol Products Powered By healthy ... infrastructure. high performance attack Alberta DOT, coatings. metal. Type1c compliant.

No - only water Th repellant sealer

UltraGuard 48

InnerCrete

UltraGuard 48

Protocol Concrete Protection Products and proprietary InnerCreteâ&#x201E;˘ Membrane Technology developed and owned

Contains VOCâ&#x20AC;&#x2122;s

Low-pressure sprayer

InnerCrete 100-150

Coverage (sq.ft./ 1US gal)

Application Method

Meefflorescence, maintenance. y m br l og an rebar corrosion, Th e Techno Inhibits cracking, n e dusting & freeze/ efflorescence, tio Ev c e olut thaw impact. t io n o f Prorebar corrosion, oncrete dusting & freeze/ Better C resistance

AdditionalInnerCrete Benefits

cement-based cement-based materials. materials. InnerCrete Above/below oducts Power Above/below r P l oco ground. Vertical/ edground. Vertical/ By ot r ... horizontal horizontal P surfaces. surfaces.

n tio ec

InnerCrete T

rot io n of Concrete P

Me o gy m br ane Technol

Ev olut

For Use On

InnerCrete

Me o gy m br InnerCrete Th ane Technol Yes yes Permanent, n e Me y - with water tio Ev olut oglorepellant t ec m br l Me super ion of TMrete T o Pro n m with InnerCrete Conc o h aThne e Tebcrane Techn gy he Ev ion sealer. n olu ect o Membrane lTechnology E t t o i i r c t u s o d Power n of Concrete P t vol P ro ed oc o By utio tec ot ... Pr n of Concret&e ProWaterproofing Waterproofing Main Use

InnerCrete

tion

InnerCrete

s Powe ProductInnerCrete red c ol o M Me t y gy By em og m br brane Technolo Th Th ane Technol ro . e e n P ectio on .. Ev Ev c ti o olu lut t ote

oc o ot Pr

Ev o

Me ogy mbr ane Technol

lutio tec n of Concrete Pro

InnerCrete

oducts Power ol P r ed

n tio

...

Yes

150-200

Low-pressure sprayer or Rollon

Contains no muriatic / hydrochloric acids - will not etch delicate surfaces. Use VersaGuard / DualGuard to prevent recurrence.

Concrete, cement-based brick & masonry, grouting, cementitious substrates.

Efflorescence removal and prevention (when used with VersaGuard or DualGuard)

yes, when used with VersaGuard or Dual Guard.

WhiteAway 60

oc ot Pr

WhiteAway 60

oducts Power ol P r ed

lutio tec n of Concrete Pro

Me ogy mbr ane Technol

InnerCrete Ev o

...

n tio

Yes

80-200

Spray, Mop or Brush (for Gel)

Quickly etches for coating adhesion, requires only water to neutralize. Comes in lightduty & heavyduty (Xtreme) formulas.

Concrete, cementitious substrates.

Concrete cleaning , surface etching, profiling for painting.

n/a

WashAway / WA-Xtreme

oc ot Pr

WashAway 63

www.innercrete.comv20130313

Yes

Compliant

Airless sprayer, brush, Roll-on

Eliminates abrasive removal methods. Safe for wood - will not strip natural oils.

Concrete, cementitious surfaces. Paint removal from wood.

Sealer and surface film remover for concrete. Paint, lacquer, varnish remover for wood.

n/a

DeSEAL

InnerCrete

DeSEAL

Th e

oc o ot r P

ucts Powe l Prod red

By ...

InnerCrete Th

brane Tec tion

ti tec of Concrete Pro

VersaGuard42

with InnerCrete™ Membrane Technology

Me o gy m br ane Technol

Ev olut

Ev olu

PERMANENT INTERNAL PROTECTION MEMBRANE FOR SURFACES THAT MAY BE COATED/PAINTED

on cti e t ro io n of Concrete P

“Protecting Concrete from the Inside...Out” InnerCrete Surface

Impermeable InnerCrete™ Membrane

V e r s a G u a r d

4 2

InnerCrete

v20100609

concrete

1-3mm

VersaGuard42 with InnerCrete™ Membrane Technology, modifies the concrete to create a permanent and consistent membrane from 1mm to 3mm below the surface. VersaGuard42 was designed to provide maximum concrete protection for surfaces that will/may be painted or coated and optimal coating adhesion is required. It is the most effective, eco-friendly solution to protect concrete and cement-based materials from:

VersaGuard42

• Water Penetration TM • Hairline Cracking InnerCrete • Efflorescence Prevention • Rebar Corrosion • Freeze / Thaw Impact • De-Icing Salt Corrosion/Pitting

• • • • •

Coating Failure Environmental Factors Oil, Stains, and Odors Dusting / Chalking Mold and Mildew

VersaGuard42 is for use on new and existing concrete and cement-based materials with a bare untreated surface. For indoor and outdoor, vertical and horizontal surfaces where maximum concrete protection is required. A coating or paint may be applied as the surface profile is maintained, ensuring proper adhesion. APPLICATIONS: • Any concrete surface where paint or a coating will/may be applied • Bridges, Roads & Infrastructure • Parkades (Above and below ground) • Pre-cast concrete and tilt-ups • Foundations and building envelopes • Water and sewage – Pipes, vaults and Plants • Containment and valve chambers (Above and below ground) • Architectural surfaces, facades and entrances • Commercial and industrial plants and facilities • Elevator and equipment pits • Marine structures • Stadiums, arenas and public facilities

VersaGuard 42 l oco ot Pr

Products Powere dB

InnerCrete Th

Ev o

Me ogy mbr ane Technol

lutio tec n of Concrete Pro

n tio

Protocol Concrete Protection Products and proprietary InnerCrete™ Membrane Technology developed and owned by Protocol Environmental Solutions Inc. www.innercrete.com Tel: 604-464-0660 | Toll Free: 1-877-464-0662

Benefits

Surface Preparation

• No VOC’s • Fully biodegradable, non-toxic and ecofriendly • Permanent - no need for reapplication • Maintains concrete breathability • Ready to use and easy application • Natural look of the concrete is maintained • Versatile - surface profile is maintained for future coating application if desired. • Improved concrete durability and longevity • Reduces long-term maintenance costs • Cost effective

Surface must be clean and free of any paint, oil, coating or surface sealant which blocks the penetration of the product into the concrete. Surface can be wet or dry however, wetting the surface first is preferable as less product will be needed. If treating a horizontal surface, water should not be pooled as this will dilute the product.

V e r s a G u a r d

4 2

Application Use a low pressure sprayer (such as a garden sprayer). Using back and forth motions, to ensure total coverage, spray the surface until saturated. Product should start to run slightly rather than be absorbed when sufficient material has been used. VersaGuard42 should be applied in weather above 5 oC.

Coverage 150 square feet / US gallon

Protocol Concrete Protection Products and proprietary InnerCrete™ Membrane Technology E n vdeveloped i r o n m e n t a land S o owned l u t i o n s by: In c .

v20100609

Environmental Solutions Inc. #105B 81 Golden Drive Coquitlam, British Columbia V3K 6R2 Canada

E n v i r o nTel: m e n 604-464-0660 t a l S o l u t i o n s In c . Toll free: 1-877-464-0662

Ewww.innercrete.com n v i r o n m e n t a l S o l u t i o n s In c .

Maintenance No special maintenance required. Maintenance and chemical use will be reduced as dirt, oils and contaminants are unable to penetrate the concrete.

VersaGuard 42 Permanent

Yes

Main Use

Concrete protection for surfaces that can be painted or coated

Impermeable to Water

Yes

Affected by External Factors (ie. UV)

Contains VOCs

Paintable

Yes

Application

Low-pressure sprayer

Required Surface for Application

Bare concrete / cement-based materials

Surface Profile Maintained

Yes

Reapplication Needed

Visual Surface Repellency

Safety Avoid contact with skin and eyes. Flush with water if contact does occur. Use standard safety precautions when using any chemical. Use in areas with adequate ventilation.

Packaging US 5 gallon (18.9L) pail US 45 gallon (170.1L) drum

1-3mm

concrete

surface

water blocked by impermeable InnerCreteâ&#x201E;˘ membrane

VersaGuard42

t io n o f Concrete

Th e

oducts Power ol Pr ed By toc o r ... P

InnerCrete Th

Ev olu

tion

tec of Concrete Pro

n ti o

DualGuard 45

with InnerCrete™ Membrane Technology

Me o gy m br ane Technol

Ev olut

Me o m br ane Technol

PERMANENT, INTERNAL PROTECTION MEMBRANE with ADDITIONAL SURFACE REPELLANT

on cti e t ro io n of Concrete P

“Protecting Concrete from the Inside...Out” InnerCrete Surface Repellant

Impermeable InnerCrete™ Membrane

D u a l G u a r d

4 5

InnerCrete

concrete

2-4mm

DualGuard 45 - with InnerCrete™ Membrane Technology, modifies the concrete to create a permanent and consistent membrane from 2mm to 4mm below the surface with a water repellant at the surface. DualGuard45 provides maximum concrete protection with an added super repellant for surface water/liquid “beading”. It is the most effective, eco-friendly solution to protect concrete and other cement-based materials from:

v20100609

• Water Penetration • Hairline Cracking TM • Efflorescence Prevention InnerCrete • Chemical Attack • Environmental Factors

• • • • •

Stain and Odor Prevention Surface Abrasion & Erosion Mold and Mildew Prevention Re-bar Corrosion Dusting

DualGuard 45 is for use on new and existing concrete and cement- based materials with a bare untreated surface. For indoor/outdoor, vertical and horizontal surfaces where maximum concrete protection is required and visual surface water repellency is desired.

APPLICATIONS: • Any concrete surface where internal protection and surface repellency is desired • Architectural surfaces, facades and entrances • Pools decks and patios • Stadiums, arenas and public facilities • Building envelopes • High traffic areas (Eg. Stairwells, ramps and walkways) where frequent cleaning maintenance is needed • Washrooms, showers and public use areas • Commercial and industrial plants and facilities

DualGuard 45 l oco ot Pr

Products Powere dB

InnerCrete Th

Ev o

Me ogy mbr ane Technol

lutio tec n of Concrete Pro

n tio

Benefits

Surface Preparation

• No VOC’s • Fully biodegradable, non-toxic and ecofriendly • Permanent - no need for re-application • Maintains concrete breathability • Ready to use and easy application • Natural look of the concrete is maintained • Improved concrete durability and longevity • Significant reduction in maintenance and costs • Cost effective

Surface must be clean and free of any paint, coating or surface sealant which blocks the penetration of the product into the concrete. Surface can be wet or dry however, wetting the surface first is preferable as less product will be needed. If treating a horizontal surface, water should not be pooled as this will dilute the product.

D u a l G u a r d

4 5

Application

v20100609

Use a low pressure sprayer (such as a garden sprayer). Using back and forth motions, to ensure total coverage, spray the surface until saturated. Product should start to run slightly rather than be absorbed when sufficient material has been used. DualGuard 45 should be applied in temperatures above 5 degrees celcius.

Coverage 150 square feet / US gallon

Protocol Concrete Protection Products and proprietary InnerCrete™ Membrane Technology E nvdeveloped i r o n m e n t a l and S o lowned u t i o n s In c. by:

Environmental Solutions Inc.

#105B 81 Golden Drive Coquitlam, British Columbia V3K 6R2 Canada

E nv i r o n m e n t a l S o l u t i o n s In c . Tel: 604-464-0660 Toll free: 1-877-464-0662

www.innercrete.com E n v i r o n m e n t a l S o l u t i o n s In c .

Maintenance No special maintenance required. Maintenance and chemical use will be reduced as dirt, oils and contaminants are unable to penetrate the concrete.

DualGuard 45 Permanent

yes - with super surface repellant

Main Use

Concrete protection with surface water repellency

Impermeable to Water

Yes

Affected by External No Factors (ie. UV, abrasion) Contains VOCs

Paintable

Yes, with conditions

Application

Low-pressure sprayer

Required Surface for Application

Bare concrete / cement-based materials

Surface Profile Maintained

Yes

Reapplication Needed

Visual Surface Repellency

Yes

Safety Avoid contact with skin and eyes. Flush with water if contact does occur. Use standard safety precautions when using any chemical. Use in areas with adequate ventilation.

Packaging US 5 gallon (18.9L) pail US 45 gallon (170.1L) drum

water blocked by impermeable InnerCreteâ&#x201E;˘ membrane 1-3mm

concrete

surface repellant

DualGuard45

t io n o f Concrete

Th e

oducts Power ol Pr ed By toc o r ... P

InnerCrete Th

Ev olut

on cti e t ro io n of Concrete P

tion

ti tec of Concrete Pro

DeBOND

AiA

from the Makers of InnerCrete™ Membrane Technology

Me o gy m br ane Technol

Me o m br ane Technol

Ev olu

Aerospace, Industrial, Architectural & General Paint & Coating Remover

“Protecting Concrete from the Inside...Out” InnerCrete

DeBOND Paint Remover 65

v20130326

v20091006

DeBOND / AiA – from the Makers of InnerCrete™ Membrane Technology, is an advanced biodegradable paint remover effective in the removal of old paint and coatings systems from steel, concrete, aluminum, masonry, brick and other alloys. DeBOND / AiA is designed to InnerCrete TM remove paint and coatings on surfaces where abrasive blast clean is not an option, such as the restoration of brick, concrete or sandstone or other delicate surfaces. Using these products will ensure that the original appearance of the substrate is not damaged in any way. Physical damage which can occur during mechanical blast cleaning is avoided. DeBOND / AiA is a fully biodegradable product that effectively removes: • Latex Paint InnerCrete

• • Acrylic Paint • • 2-Part Epoxies • Alkyd Paint • • TM

General Purpose Paints High performance coatings (Aerospace, Industrial) Fusion Bonded Epoxies 2-Part Urethane Materials

DeBOND / AiA can be used on indoor / outdoor, vertical and horizontal surfaces where paint removal is required. This product is effective is removing multiple layers of paint / coatings, however, multiple product application and removal processes may be required. Due to its more concentrated, faster acting formula, AiA is for applications involving high performance coatings or where dwell time is restricted. When using on delicate surfaces, such as brick, test a small area first. APPLICATIONS: • • • • • •

General Paint Stripping Aerospace and industrial paint stripping Architectural Facades Floor coating removal Most sealant removal / stripping Refurbishment projects in mines, petrochemical plants and pulp & paper mills • Any removal application where blast removal is not an option due to environmental or worker safety concerns

DeBOND 65 oc ot Pr

oducts Power ol P r ed

InnerCrete Th

Ev o

...

Me ogy mbr ane Technol n tio lutio tec n of Concrete Pro

Benefits • Fully biodegradable • Very effective in the removal of multiple layers of paint • Will remove most high performance coatings and systems • Water-based material • Low odor • Contains no Methylene Chloride, Caustics or NMP • White in color to assist with coverage during application

DeBOND Paint Remover 65

Surface Preparation

v20130326

v20091006

Apply in temperatures above 5o C, warmer temperatures increase efficacy. Surfaces should be free of dust, oils and excess water. Ensure all areas not to be stripped are suitably protected. Good ventilation must be provided in confined areas. Thoroughly mix DeBOND each time prior to use and test a small area first to determine substrate colorfastness.

Application & Dwell Time Apply DeBOND / AiA using an airless sprayer or HVLP equipment. Do not atomize. Use equipment capable of 2000 psi fitted with chemical resistant packaging. Product can be applied with brush or roller only in small areas, as results will be less consistent. Once applied on surface DO NOT AGGITATE PRODUCT. If removing multiple layers, multiple application and removal of lifted layers may be required. Dwell time will vary due to factors such as type and layer of paint, temperature etc. Most removal times will take between 1 – 6 hours to lift. Some high performance coatings may take up to 48 hours. Do not allow product to dry on surface, reapply more product.

Removal: Residue can be removed by pressure washer (2500-3000 psi). During the removal process two waste streams are created, liquid waste (composed of used product and wash water) and solid waste (paint chips/material). Liquid waste is inert and biodegradable, solid waste should be collected and disposed of according to local government regulations. For indoor application, use a scraper and squeegee then wet/ dry vacuum system. Do not store removed material in metal containers.

REFER TO TECHNICAL DATA SHEET FOR COMPLETE APPLICATION, REMOVAL AND SAFETY INSTRUCTIONS. DO NOT STORE IN METAL CONTAINER OR MIX WITH ANY OTHER MATERIALS / PRODUCTS. Coverage: 80 Square feet / US gallon (based on a 1 application process)

Packaging US 5 gallon (18.9L) pail

Safety Causes skin and eye burns; flush with water if contact occurs. Causes respiratory tract irritation; use only with proper ventilation. Keep out of reach of children. Use standard safety precautions. Store in a closed container when not in use.

Protocol Concrete Protection Products and proprietary InnerCrete™ Membrane Technology developed and owned In by: Environmental Solutions c.

PROTOCOL

P ROTOCOL

Environmental Solutions Inc.

Protocol

#105B 81 Golden Drive Coquitlam, British Columbia V3K 6R2 Canada

Environmental Solutions In c . Tel: 604-464-0660

Toll free: 1-877-464-0662

Pwww.innercrete.com ROTOCOL E n v i r o n m e n t a l S o l u t i o n s In c .

ucts Powe l Prod re d o co By ot ... Pr

InnerCrete Th

Me ogy m br ane Technol

Ev olut

ti ec rot io n o f Concrete P

DeRUS

ed & Paint l a t e M for mover e R t s u Flash R

BEFORE Environmentally-Safe & Acid-Free Method of Easily Removing Flash Rust USES: • Safe for metals; steel, iron, stainless steel, aluminum and other alloys • Safe for painted metals, won’t remove the paint • Effective in immersion/dip/ballast tanks • Vertical & Horizontal and Interior/Exterior Surfaces

AFTER

Surface

Spray-On Brush-On Gel Immersion Tank

QUESTIONS? Tel: 604-464-0660 Toll free: 1-877-464-0662 Email: julia@innercrete.com or visit www.innercrete.com

FEATURES: • Does NOT contain muriatic or other strong acids and caustics • Non-toxic and fully biodegradable • Will not attack healthy metal • High Performance • Economical • Non-corrosive and non- flammable

Protocol Products and proprietary InnerCrete™ Membrane Technology developed and owned by Protocol Environmental Solutions Inc.

Industrial & Acrylic Sealant Remover Paint / Coating & Varnish Remover for Wood 

BEFORE

 

AFTER – Removal with DeSEAL



Acid-free Water-based Non-toxic & non-corrosive Fully Biodegradable Dwell Time After Application

  

SPRAY ON WAIT PRESSURE WASH OFF

t io n o f Concrete

Th e

oducts Power ol Pr ed By toc o r ... P

InnerCrete Th

ti tec of Concrete Pro

WashAway 63 tion

from the Makers of InnerCrete™ Membrane Technology

Me o gy m br ane Technol

ev olut

Me o m br ane Technol

ev olu

COncretE CLEANER & Surface etcher

on cti e t ro io n of Concrete P

- REPLACES MURIATIC ACID -

“Protecting Concrete from the Inside...Out” InnerCrete

WashAway Concrete Cleaner 63

v20120927

v20091006

WashAway is an effective and easy to use two-in-one product for concrete and cementitious substrates. In one step, it efficiently etches concrete and cementitious substrates in preparation for painting or coating while also cleaning and removing deeply embedded stains and contaminants.

InnerCrete

WashAway is sprayed, brushed or mopped on surfaces, left to dwell for 15-20 minutes, then pressure washed away. It only requires H2O to neutralize (No special neutralizing agent). SPRAY ON - WAIT - PRESSURE WASH OFF - CLEANED & PROFILED FOR PAINTING This advanced, fully-biodegradable profiling product totally replaces muriatic acid, sand blasting and other abrasive profiling methods. WashAway is neutralized with simple H20 (no special TM InnerCrete agents) and leaves surfaces profiled for proper paint and coating adhesion. Deep stains, rust, oils, organic materials and contaminants are removed. Organic re-growth is reduced so that cleaning jobs last longer. Washaway is non-toxic, has no odor and contains no hydrochloric acids or caustics. It is available in both liquid and gel form (for vertical surfaces). WashAway can be used on: • Concrete

• Ceramic and grout • Cementitious materials

WashAway can be used on indoor / outdoor and vertical and horizontal surfaces where surface profiling and preparation or cleaning is required. It is easy and ready to use, eliminates abrasive blasting methods and will greatly reduce labor costs and caustic chemical usage. APPLICATIONS: • Any cement substrate requiring profiling for coating adhesion • Building exteriors • Parking lots and garages • Stairwells and walkways • Garbage areas • Public washrooms and facilities • Factory / warehouse floors • Arenas and sports facilities • Bus and train stations

WashAway 63 oc ot Pr

oducts Power ol P r ed

InnerCrete Th

Ev o

...

Me ogy mbr ane Technol n tio lutio tec n of Concrete Pro

BENEFITS:

Coverage:

• • • • • • • •

150 - 250 sq ft per US Gallon

Replaces muriatic acid Only requires neutralizing with H2O Water-based and fully biodegradable Eliminates blasting profiling methods No odor and non-toxic Works quickly and effectively Reduces labor Contains no hydrochloric acid, bleach, caustics, petroleum distillates • Phosphate free • Easy and ready to use • VOC free

WashAway Concrete Cleaner 63

Surface Preparation

v20120927

v20091006

Apply in temperatures above 5oC, warmer temperatures increase efficacy. Protect all plants, vegetation, glass and metals from overspray before using. Sweep away excess dirt or debris from surface. Surfaces can be wet or dry, however water should not “pool” on the surface as this will cause product dilution. Always test a small area before use.

Application & Dwell Time Use at full strength. Apply by spraying, brushing or rolling on. Thoroughly saturate or cover (for gel) surfaces to be profiled or cleaned. Allow to sit for 15-20 minutes. Agitation is recommended for increased surface profiling and stubborn stain removal.

Removal: Test small area to ensure stains have lifted; then pressure-wash thoroughly to remove all residue. Stubborn stains may require additional product for complete removal. All materials are fully biodegradable and do not need to be contained; they can be rinsed away according to local regulations. For indoor application a wet/dry vacuum system may be required for containment. NOTE: WashAway only requires neutralizing with water (not a neutralizing agent such as baking soda). If applying paint or a sealant after cleaning ensure WashAway and any residues are completely removed. Consult with paint manufacturer’s instructions for individual profiling requirements.

REFER TO TECHNICAL DATA SHEET FOR COMPLETE APPLICATION, REMOVAL AND SAFETY INSTRUCTIONS.

Packaging US 5 gallon (18.9L) pail US 1 gallon (3.78L) pail

Safety Can cause skin and eye burns. Wear protective gloves and eyewear. Flush with water if contact occurs. Causes respiratory tract irritation, use in ventilated areas. Keep away from children. Use standard safety precautions. Store in closed container when not in use.

Properties: Physical state: liquid or gel Color: clear Odor: odorless Specific Gravity: 1.01 Density: eliminate pH: acidic VOC: none Boiling Point: 100 C Freezing Point: -3C Flash Point: none Temperature Use Range: 5-40C Optimum Range: 10-40C Stability: stable Clean Up: water, fully biodegradable

Protocol Concrete Protection Products and proprietary InnerCrete™ Membrane Technology Environmental Solutions c. developed and owned In by:

PROTOCOL

P ROTOCOL

environmental Solutions Inc.

Protocol

#105B 81 Golden Drive Coquitlam, British Columbia V3K 6R2 Canada

Environmental Solutions In c .

Tel: 604-464-0660 Toll free: 1-877-464-0662

Pwww.innercrete.com ROTOCOL E n v i r o n m e n t a l S o l u t i o n s In c .

   

SPRAY ON WAIT PRESSURE WASH READY TO PAINT

REPLACES MURIATIC ACID!

DUAL-FUNCTION TECHNOLOGY

1) Industrial Concrete Cleaner 2) Surface Profiler & Preparation

t io n o f Concrete

Th e

oducts Power ol Pr ed By toc o r ... P

InnerCrete

WhiteAway Efflorescence Remover 60

Me o gy m br ane Technol

Ev olut

on cti e t ro io n of Concrete P

Me o m br ane Technol

Ev olu

tion

ti tec of Concrete Pro

WhiteAway 60 from the Makers of InnerCrete™ Membrane Technology

Efflorescence Remover

“Protecting Concrete from the Inside...Out” InnerCrete TM

WhiteAway – from the Makers of InnerCrete™ Membrane Technology, is an advanced VOC Free efflorescence remover, formulated to dissolve efflorescence (whitish residue) and remove groundin dirt from concrete surfaces. It properly cleans and prepares surfaces for a secondary protective treatment. When used in conjunction with VersaGuard or DualGuard as a secondary treatment, efflorescence isTMfirst removed then effectively prevented from recurring on InnerCrete the surface. WhiteAway contains no hydrochloric (muratic) acid so as not to etch delicate surfaces, making it a safe choice for heritage or sensitive substrates. Damage that results from using harsh blasting removal processes is avoided. WhiteAway is fully biodegradable and effectively removes efflorescence, ground-in dirt and InnerCrete TM stains from: • Concrete • Brick • Slabs

- Cement-based materials - Pavers, patios and driveways - Retaining walls

WhiteAway can be used on indoor / outdoor, vertical and horizontal surfaces where efflorescence, dirt or stains are visible. WhiteAway is easy to use; it is applied using a garden sprayer working in back and forth motions to ensure adequate coverage. DO NOT ATOMIZE. WhiteAway penetrates deep into the substrate without damaging the surfaces. It cleans evenly and brightens up old, stained or discolored surfaces. ALWAYS TEST A SMALL AREA FIRST.

v20091006

v20100625

APPLICATIONS: • Efflorescence removal • Preparation of surface for application of a concrete protection treatment • Removes stains and ground-in dirt from concrete • Prevention of efflorescence when used in conjunction with VersaGuard or DualGuard

WhiteAway 60 oc ot Pr

oducts Power ol P r ed

InnerCrete Th

Ev o

...

Me ogy mbr ane Technol n tio lutio tec n of Concrete Pro

Packaging US 1 gallon (3.78L) jug US 5 gallon (18.9L) pail

Benefits Fully biodegradable VOC Free Low PH Contains no hydrochloric acid so will not damage surfaces • 2-in-one product:efflorescence remover and concrete cleaner • Easy to use with very little mess • Step 1 of a 2-step system to clean and prevent the recurrence of Efflorescence (Step2: VersaGuard or DualGuard)

WhiteAway Efflorescence Remover 60

• • • •

v20091006

v20100625

Surface Preparation Always test a small hidden area first. Apply in temperatures above 5o C. Do not apply under blazing sun as this will cause the product to dry out. Product can be applied to damp or dry but not saturated (pooled water) surfaces. All glass, plants, woods, and delicate, nonmasonry surfaces should be properly protected from overspray of WhiteAway.

Dilution Rate: Use at full strength for heavy efflorescence and stains, dilute 1:1 with water for light duty removal.

Application & Dwell Time WhiteAway is applied using a garden sprayer. DO NOT ATOMIZE. Do not apply with a mop or roller. WhiteAway can be applied on wet surfaces. Wear rubber gloves and safety goggles. Spray surface with product until totally saturated. Heavy efflorescence may require agitation with a stiff brush. Product should be left on for at least 15 minutes, but no more than 30 minutes, to properly dissolve the efflorescence. Check product often. If product dries on the surface, reapply product. Once removed, if efflorescence or stains still remain, reapply more product and repeat the process.

Removal: Agitate the stubborn efflorescence if necessary. Use a pressure washer to remove residue and product. Continue washing the surface until no foamy residue remains. This step will properly neutralize the product so that it can be rinsed away without special disposal. If any efflorescence or staining remains, repeat the above steps.

Preventing the Recurrence of Efflorescence: Once the surface is totally rinsed and completely cleaned of efflorescence and ground-in dirt treat the concrete with either VersaGuard or DualGuard (depending on application). Both of these products incorporate InnerCrete™ Membrane Technology, which creates an internal, impermeable membrane within the concrete. This InnerCrete™ Membrane effectively stops the chemical reaction that causes efflorescence to form, thereby preventing the recurrence of visible efflorescence at the surface.

Coverage: 200 Square ft /US gallon (based on 1 gallon of UNDILUTED product. If diluting the product to remove light efflorescence additional coverage is possible.)

Safety Always read Technical Data sheet and MSDS before using the product. Do not alter, mix or dilute this product with any other chemicals. Causes skin and eye burns; flush with water if contact occurs. Causes respiratory tract irritation; use only with proper ventilation. Keep out of reach of children. Use standard safety precautions. Store in a closed container when not in use.

Protocol Concrete Protection Products and proprietary InnerCrete™ Membrane Technology developed and owned In by: Environmental Solutions c.

PROTOCOL

P ROTOCOL

Environmental Solutions Inc.

Protocol

#105B 81 Golden Drive Coquitlam, British Columbia V3K 6R2 Canada

Environmental Solutions In c . Tel: 604-464-0660

Toll free: 1-877-464-0662

Pwww.innercrete.com ROTOCOL E n v i r o n m e n t a l S o l u t i o n s In c .

SOLUTIONS FOR WATERPROOFING & WATER REPELLENCY Water and moisture penetration and the damage it causes to concrete and other cementbased products can be extensive. Even a small crack, when continuously exposed to water, liquids and moisture, over time creates real problems, structurally and aesthetically. VersaGuard and DualGuard (based on variations of InnerCreteTM Membrane Technology) can be used in place of traditional sealants, but also provide the benefits listed below;       

Creates a permanent, impermeable barrier to water and effectively prevents the ingression of water/moisture Hydrostatic pressure resistant Minimizes water damage and rebar corrosion Reduces future hairline cracking. Maintains breathability Improves durability and increases resistance to surface abrasion DualGuard also has an added super surface sealer for added visual surface repellency/”beading” desired for certain applications.

VersaGuard and DualGuard are not designed to fill large voids and cracks already present in concrete, rather to prevent the some of the factors that cause cracking. Protocol Products can be used in conjunction with other products designed to fill cracks in concrete.

All Protocol Products are for use:  Indoor / Outdoor  Above and Below Ground  Vertical, Horizontal and Ceiling Surfaces

………………………….Over for Applications and Choosing and Product

APPLICATIONS: Foundations Parking Structures Elevator Pits Tunnels and Overpasses Transit Lines Bridges, Dams Architectural Facades & Features Pool and Patio Decks Marinas Aquariums and Zoos Rec Centers Mining Operations Pulp and Paper Mills Chemical Plants Containment Chambers & Vaults Concrete Pipes Water reservoirs and tanks Sewage tanks and plants Pre-Cast Concrete and Tilt-ups Stadiums and arenas Rooftops and plaza decks Work shops and wash bays Public-use and high traffic areas

VersaGuard42 X X X X X X X X X X X X X X X X X X X

DualGuard45 X

X X X X X

X X X X

CHOOSING A PRODUCT For use on concrete which will / may have paint or a coating VersaGuard applied. This product can be used in high-traffic areas subject to the pooling of liquids on the surface, however normal precautions must still be followed. For use on concrete which will retain a natural surface, yet has the DualGuard addition of a super surface repellant for visual water â&#x20AC;&#x153;beading.â&#x20AC;? For use in applications that would normally use a surface sealer but with increased durability and longevity of the concrete mass. Caution should be used when treating high traffic areas as pooling of the liquids on the surface could be a slipping hazard.

SOLUTIONS FOR MAINTENTANCE ISSUES Protocol Products are the solution to minimizing concrete maintenance issues, improving concrete durability and longevity and reducing maintenance costs. If left untreated, concrete in high traffic areas or areas continuously exposed to the elements quickly becomes dirty, stained, and smelly. Moss and mildew often grows and will deteriorate the concrete surface if left unmaintained. VersaGuard and DualGuard based on InnerCreteTM Membrane Technology;       

Creates a permanent, impermeable barrier that effectively prevents staining and odors from oils, dirt, liquids, bacteria growth and other contaminants. Reduces maintenance costs, due to the minimal labor needed for upkeep of treated surfaces. Reduces chemical usage, minimal to no chemicals are needed to keep surface maintained since stains and oils cannot penetrate. Increases concrete durability and longevity by improving resistance to surface wear, abrasion and erosion. Increases surface resistance to chemical spills and attack. Minimizes moss, mold and mildew growth. Maintains breathability

VersaGuard and DualGuard are both based on InnerCreteTM Membrane Technology and create a permanent impermeable protection membrane within concrete, however, each product is uniquely designed to suit specific applications. Because maintenance requirements vary depending on application, check the suitability of each product to ensure compatibility with the intended use.

All Protocol Products are for use:  Indoor / Outdoor  Above and Below Ground  Vertical, Horizontal and Ceiling Surfaces

……………………… Over for Applications and Choosing a Product

APPLICATIONS: VersaGuard42 Walkways, Entrances & Foyers Parking Structures Stairwells Architectural Facades & Features Ponds and Fountains Patios and Pool Decks Aquariums and Zoos Marinas Rec Centers Aquariums and Zoos Stadiums and Arenas Parks and Plazas Building Envelopes and Facades Tunnels and Overpasses Tilt-ups Transit Shelters Rooftops Concrete Floors Industrial Plants Commercial Facilities High traffic public-use areas

X X

X X X X

DualGuard45 X X X X X X X X X X X X X

X X X

X X X X X X

SOLUTIONS FOR CRACKING CONCRETE Concrete cracks due to numerous reasons and over time can become brittle resulting in additional hairline cracking and concrete deterioration. Even a small crack, when continuously exposed to water, liquids and moisture, can eventually create massive problems both structurally and aesthetically.

Preventing hairline cracking and improving the abrasion resistance of concrete surfaces dramatically reduces larger cracks from occurring.

InnerCreteTM Membrane Technology used in VersaGuard and DualGuard;  Strengthens the concrete minimizing future hairline cracking.  Improves surface abrasion and erosion resistance  Improves resistance to chemical attack, which reduces concrete delamination, cracking and deterioration.  Improves resistance to environmental factors, which reduces concrete delamination, cracking and deterioration. CHOOSING A PRODUCT VersaGuard and DualGuard with InnerCreteTM Membrane Technology, create an integral membrane within the concrete which increases resistance to hairline cracking and minimizes future cracking. Not designed to prevent cracking due to shifting / settling or fill large voids / cracks already present. They will not interfere with and can be used in conjunction with other products designed to fill cracks in concrete. Once patched (and cured if necessary) according to the manufacturer’s instructions, use VersaGuard or DualGuard according to the instructions. To choose a product for a specific application, refer to the individual product pages. VersaGuard

DualGuard

For use on concrete which will / may have paint or a coating applied. This product can be used in high-traffic areas subject to the pooling of liquids on the surface, however normal precautions must still be followed. For use on concrete which will retain a natural surface, yet has the addition of a super surface repellant for visual water “beading.” For use in applications that would normally use a surface sealer but with increased durability and longevity of the concrete mass. Caution should be used when treating high traffic areas as pooling of the liquids on the surface could be a slipping hazard.

SOLUTIONS FOR REBAR CORROSION VersaGuard and DualGuard are designed to assist in maintaining the structural integrity of concrete by reducing rebar corrosion and preventing some of the factors that cause cracking and concrete deterioration. Water penetration can cause extensive damage to concrete including serious rebar corrosion. Over time rebar deterioration and rust stains create real problems, structurally and aesthetically. VersaGuard and DualGuard based on InnerCreteTM Membrane Technology    

Create a permanent, impermeable barrier to water and effectively prevents the ingression of water/moisture and Minimizes water damage and rebar corrosion Strengthens the concrete minimizing future hairline cracking. Maintains breathability

CHOOSING A PRODUCT Both VersaGuard and DualGuard employ InnerCreteTM Membrane Technology and are suitable for inhibiting rebar corrosion. Protocol Products are not designed fill large voids and cracks already present in concrete, but can be used in conjunction with other products designed to fill cracks in concrete. For applications with existing rebar corrosion and concrete deterioration, 1) Deteriorated concrete should be completely removed 2) DeRUST (gel) should be used to remove all visible rust from exposed rebar then thoroughly neutralized with water 3) Exposed concrete should be treated with VersaGuard 4) Patch area with suitable concrete patch / fill product 5) Treat entire area with VersaGuard or DualGuard to prevent recurrence (see below) VersaGuard

DualGuard

SOLUTIONS FOR EFFLORESCENCE CONTROL & PREVENTION The Protocol Product line; WhiteAway and VersaGuard or DualGuard, are a complete system to effectively remove and prevent efflorescence. THE EFFLORESCENCE CONTROL & PREVENTION SYSTEM: 1) WhiteAway Efflorescence Remover sprayed / brushed on surfaces. Its acid-free formulation is safe for most delicate surfaces. Totally saturate surface and let dwell. Agitate surface for heavy efflorescence. 2) Pressure-wash to remove and neutralize. 3) Treat with VersaGuard or DualGuard to prevent efflorescence from recurring. Efflorescence develops as moisture and water migrate through concrete and react with elements present in concrete such as alkaline calcium components, salts and hydroxide residues. These dissolved elements are then carried to the surface where the moisture is dissolved and a whitish (usually) material is left behind. Over time, this whitish material, efflorescence, hardens on the surface and is difficult to remove.

Efflorescence affects concrete, brick and other cement-based materials. Efflorescence causes:  Paint and coating failure  Unsightly residues on concrete VersaGuard and DualGuard - with InnerCreteTM Membrane Technology control efflorescence by:  

Creating a permanent impermeable protection membrane within concrete. Preventing water penetration that causes the efflorescence reaction to occur.

CHOOSING A PRODUCT Both DualGuard and VersaGuard are suitable for controlling efflorescence. VersaGuard

DualGuard

SOLUTIONS FOR ELIMINATING COATING FAILURE Coating failure and delamination from concrete surfaces is a widespread and costly problem. Failure can occur for many reasons. Coating failure and delamination due to:  Moisture transmission from within the concrete  Efflorescence  Internal rebar corrosion CAN BE PREVENTED by first treating the surface with VersaGuard.

CHOOSING A PRODUCT Protocol Products, WashAway and VersaGuard; provide a complete system for optimal coating adhesion and performance. WashAway eliminates the need for surface prep / etching using muriatic acids or grinding methods. VersaGuard is uniquely developed to inhibit moisture transmission while maintaining the surface profile of concrete and cement-based materials. This allows for optimal paint and coating adhesion. VersaGuard based on InnerCreteTM Membrane Technology;  Adhesion promoter for concrete surfaces  Creates a permanent, impermeable barrier beneath the concrete surface that prevents moisture transmission from within the concrete to the surface  Maintains the surface profile for optimal coating adhesion.  Prevents efflorescence from rising to the surface which causes adhesion to breakdown and the coating to fail.  Prevents rebar corrosion from rising to the surface which causes adhesion to breakdown and the coating to fail.  Maintains breathability. APPLICATION VersaGuard can be used in any concrete substrate that will have paint, coating or epoxy membrane applied. When using on new concrete surfaces, concrete should be properly cured before substrate is treated. 1) Apply WashAway – Concrete Etcher / Cleaner to substrate. Let dwell at least 15-20 minutes depending on required profile. (Refer to paint manufacturer’s specifications) 2) Pressure-wash thoroughly with water to neutralize. 3) Apply VersaGuard to substrate. Allow to dry. 4) Paint/ coat according to individual manufacturer’s specifications.

SOLUTIONS FOR FLOORING Protocol Products are designed to assist in improving all types of sub-flooring and flooring systems. VersaGuard and DualGuard should be applied on bare concrete surfaces to allow the penetration of the product into the substrate. Any old paints, sealants etc. must be removed prior to treatment. COATINGS (Urethane, epoxy, concrete paint, poly-urethanes and other systems)    

Use VersaGuard, before applying a paint or coating Maintains surface profile for proper adhesion Creates a permanent barrier, impermeable to water beneath the surface of the concrete Prevents coating failure and delamination due to: o Moisture transmission from within the concrete o Efflorescence o Internal rebar corrosion

**DeBOND / AiA can be used to effectively remove old paint and coating systems prior to treating with VersaGuard and new paint application.** ***WashAway – Concrete Etch / Cleaner can be used in place of muriatic acids and grinding methods to effective prep and profile concrete substrate in preparation for treatment with VersaGuard and new paint / coating application.***

NATURAL OR DECORATIVE CONCRETE FLOORS, PAVERS, PATIOS VersaGuard or DualGuard can be used in any application which would be treated with a sealant or repellant, however they provide many additional benefits.         

Creates a permanent, water-impermeable membrane Use after concrete has properly cured or pavers have been laid, a surface sealer is not necessary and should not be used as it prevents the penetration of the product into the concrete. Eliminates damage due to surface abrasion and erosion Prevents staining due to liquids, oils and dirt Eliminates damage due to surface water ingression Minimizes damage due to de-icing salt corrosion Improves resistance to environmental factors Reduces damage due to chemical attack Minimizes moss, mildew and organic growth

ADHESIVE-APPLIED FLOORING (Tile, vinyl, hardwood, laminate and carpet)    

Use VersaGuard, before applying a flooring system Maintains surface profile Creates an impermeable barrier beneath the surface of the concrete Prevents adhesive delamination and warping due to: o Moisture transmission from within the concrete o Efflorescence o Internal rebar corrosion

**DeSEAL – Sealant Remover can used to effectively remove old mastics and adhesives from previous flooring systems.**

CHOOSING A PRODUCT Before treating any surface with Protocol Products, determine future use and application of the surface. VersaGuard should be used if paint or a coating will later be applied to the surface. DualGuard is effective in many walk-way / patio applications, yet caution should be used as liquids will pool on the surface and may cause a slipping hazard. APPLICATIONS: Any surface which will be painted Any surface which will have a coating applied Under any tiled, carpeted or vinyl floor Under any laminate or wood floor Parking Structures (under epoxy membranes) Stairwells Any decorative concrete floor Skating Rinks Aquarium and Zoo Pens Warehouses Fountains and man-made ponds Chemical and Industrial Plants Commercial Facilities Manufacturing Facilities Any concrete floor which will remain bare Any concrete floor which would normally be treated with a sealer or repellent

VersaGuard X X X X X X

DualGuard

X X

X X X X X

X X X X X X X X

SOLUTIONS FOR MOLD AND MILDEW Protocol Products, VersaGuard and DualGuard, are the solution to minimizing mold, mildew and bacterial growth on concrete and other cement based materials. VersaGuard and DualGuard based on InnerCreteTM Membrane Technology;      

Creates a permanent, impermeable barrier that effectively minimizes moss, mold and mildew growth. Reduces maintenance costs, due to the ease with which any organic growth is removed. Reduces chemical usage, no chemicals are needed to easily maintain surface. Increases concrete durability and longevity by improving resistance to surface wear, abrasion and erosion. Increases surface resistance to de-icing salts and chemical spills and attack. Maintains breathability

CHOOSING A PRODUCT Both VersaGuard and DualGuard - with InnerCreteTM Membrane Technology, create a permanent impermeable protection membrane within concrete and are suitable for controlling moss and mildew growth. Each product has been uniquely designed to suit specific applications. DualGuard is ideal for concrete surface which will remain bare, as the added surface repellant creates a surface that helps resist organic growth. Any growth that does occur is easily removed and does not require chemicals, scrubbing, agitation or other destructive methods of removal that can permanently damage surfaces. Surface appearance is improved and maintenance is reduced. VersaGuard is ideal for concrete surface surfaces which are subject to water ingression and potential mold growth, such as leaking basements.

VersaGuard & DualGuard are for use:  Indoor / Outdoor  Above and Below Ground  Vertical, Horizontal and Ceiling Surfaces

Because requirements vary depending on application, check the suitability of each product to ensure compatibility with the intended use.

SOLUTIONS FOR SPALLING and FREEZE / THAW DualGuard and VersaGuard based on InnerCreteTM Membrane Technology are the solution to reducing spalling and freeze/thaw by improving concrete durability, increasing surface resistance to abrasion and eliminating moisture and water penetration. If left untreated, concrete surfaces exposed to water ingression and changing temperatures, quickly cracks and delaminates and deteriorates over time. VersaGuard and DualGuard with InnerCreteTM Membrane Technology;       

Creates a permanent, impermeable barrier that prevents water and moisture penetration. Improves resistance to surface abrasion, delamination and erosion. Improves resistance to environmental factors (ie. freezing temperatures) Improves resistance to chemical attack, which reduces concrete delamination, and deterioration Improves bonding of paste to the aggregrate. Strengthens the concrete minimizing future hairline cracking Maintains breathability All Protocol Products are for use:  Indoor / Outdoor  Above and Below Ground  Vertical, Horizontal and Ceiling Surfaces

Both VersaGuard and DualGuard utilize InnerCreteTM Membrane Technology which creates a permanent impermeable protection membrane within concrete. Each product, however, is uniquely designed to suit specific applications. CHOOSING A PRODUCT VersaGuard

DualGuard

Because requirements vary depending on application, check the suitability of each product to ensure compatibility with the intended use.

SOLUTIONS FOR DUSTING Dusting is the formation of a powdery chalk on the surface of concrete, usually on floors. This powder occurs as a result of any normal traffic or wear and tear, even sweeping. Dusting can be problematic to electronics, computers, machinery and other items which can be destroyed or damaged by the heavy, clogging dust. Dusting occurs because the wear surface is weak which is due to a variety of causes, such as improper mix, improper curing or changing VersaGuard or DualGuard based on InnerCreteTM Membrane Technology;    

Improves resistance to surface abrasion, dusting and erosion. Improves resistance to chemical attack, which reduces concrete delamination, deterioration and dusting. Improves resistance to environmental factors Strengthens the concrete minimizing future hairline cracking.

CHOOSING A PRODUCT Because both VersaGuard and DualGuard create the integral InnerCreteTM Membrane within the concrete that strengthens it, the treated concrete has an increased resistance dusting and surface abrasion. This makes both products an effective solution to eliminating dusting. VersaGuard

DualGuard

All Protocol Products are for use:  Indoor / Outdoor  Above and Below Ground  Vertical, Horizontal and Ceiling Surfaces

oc ot Pr

od ucts Po wer ol P r ed

InnerCrete Th eE

Me m br

vol

ut ion

l og an e Techn o

L U O F De

. ..

over t Rem n i a P uling Antifo

SIMPLY: 1. SPRAY 2. WAIT 3. WASH

r ote of Concr ete P

io n ct

The Easy & Effective Way to Remove Copper-Based Antifouling Paint Without Sanding or Blasting Uses: • Safe for use on gel coats, fiberglass, aluminum, steel and wood hulls • Totally eliminates time consuming and costly sanding and blasting processes Features: • Safe: Will not damage gel coats and epoxy barrier coatings • Easy to Use: Simple spray-on application, wait and pressure wash off • Effective: Can remove multiple layers of anti-fouling paint with 1 application • Economical: Slashes the price of removal! (Compared to traditional methods) • Cleaner & Greener: Water-based and fully biodegradable in water, waste water can be washed away, no toxic airborne pollutants from sanding • Less Clean-up: Solid paint waste is easily collected and disposed of • No regulated VOC’s • Non toxic and non corrosive

A technological breakthrough for the marine industry !

• No HAPS and no TAPS

DeFOUL is an easy and effective method for the removal of copper-based antifouling paint off most boats or hull material without any damage to the gel coat. For the rare occasion that NON copper-based antifouling paint has been used please contact the Company for the appropriate specialty product. Simply;

1. Spray the product directly on a clean hull, 2. Wait for the product to react, 3. Wash away with a pressure washer.

AFTER

BEFORE

DeFOUL eliminates the need for time consuming and costly sanding or blasting removal methods which can damage the gel coat. Other costly “peel-off” methods provide inconsistent results and large amounts of waste to be disposed of.

Protocol Environmental Solutions Inc. #105B 81 Golden Drive, Coquitlam, BC, V3K6R2, (604)464-0660, www.innercrete.com

DeFOUL:

Copper-Based Antifouling Paint Remover Description: DeFOUL is an advanced, fully biodegradable, spray-on antifouling paint remover. Without damaging the underlying and expensive gel coat, it quickly and effectively removes copper-based antifouling paint and eliminates the need for costly sanding, blasting or “peel and strip” methods of removal. Simply spray DeFOUL on a clean hull, wait and pressure wash off once the paint has started to lift. DeFOUL minimizes the amount of waste and harmful impact to the environment; no airborne contaminants are created from sanding; and large amounts of waste created from “peel and strip” methods are avoided. It is effective in removing multiple layers of copperbased antifouling paint with each application. DeFOUL encapsulates toxic metal fillers, such as copper and tin and creates two waste streams; liquid waste (product and wash water) which is inert and fully biodegradable and can be washed down the drain, and solid waste (paint material) which can be collected at the drainage point and disposed of correctly. For Use On: Fiberglass, aluminum, steel and wood boat hulls. Will NOT damage gel coats or epoxy barrier coatings. Note: For the rare occasion that NON copper-based antifouling paint has been used please contact the Company for the appropriate specialty product.

stubborn or multi-layers but do not allow to dry out. Additional applications or small touch-up areas may be required. Small areas can be retouched using a brush. Apply in weather above 10o C. Warmer temperatures will increase efficacy. Removal: Before removal, ensure drains are properly protected to ensure solid paint waste can be collected and disposed of properly. Liquid waste is inert and fully biodegradable; it can be washed away. Thick residues can be removed by scraping. If paint remains, reapply DeFOUL without washing the hull as water will neutralize and cause paint to re-adhere to the surface. DeFOUL is also removed using a pressure washer with a turbo tip at a slight angle to assist in “lifting” the paint from the gel coat. Using hot water will increase efficacy. Once removal is complete, neutralize surface with water. DO NOT store removed material in metal containers! Safety: Use standard protective clothing and safety precautions when using this product. Causes skin and eye burns, flush with water if contact occurs. Causes respiratory tract irritation; use only with proper ventilation. Keep out of reach of children. Store in a closed container when not in use.

Coverage: Approximately 40 - 120 sq ft / US gallon. Multi-layers of anti-fouling paint may require additional product.

Protocol Concrete Protection Products and proprietary InnerCrete™ Membrane Technology owned by: Envideveloped ro nmenta l and Solutio ns Inc.

PROTOCOL

Site Preparation: DeFOUL can be used indoors or outdoors in well ventilated areas. Ensure drains are properly protected to ensure solid paint waste can be collected and properly disposed of.

P ROTOCOL

Application & Dwell Time: DeFOUL must be applied to boat hulls that have first been cleaned of oils, residues and other organic and marine material. It should be applied using using an airless sprayer with a fan tip of (0.021-0.031) (consult TDS for a list of suggested sprayers). DO NOT ATOMIZE OR USE A ROLLER. Lightly scuffing or sanding the hull surface first will assist in penetrating and removing multiple layers of antifouling paint. Spray DeFOUL on thick enough to completely cover the antifouling paint. The color of the antifouling paint should not be visible. Ensure there is minimal “sagging” or dripping of the product. DeFOUL should be left for at least 6 hours for antifouling paint to start lifting. (Dwell time depends on temperature and layers of paint) DO NOT AGITATE, TOUCH OR INTERFERE WITH DeFOUL. Paint will become visible, changing the color and “lifting” through DeFOUL when activated. DeFOUL can be left overnight for

E n v i r o n m e n t a l S o l u t i o n s In c .

Represented by

Protocol

#105B 81 Golden Drive Coquitlam, British Columbia V3K 6R2 Canada

Envi ro nment al So lut ions Inc. Tel: 604-464-0660

Toll free: 1-877-464-0662

www.defoul.com v20120920

DeFOUL is the best choice for anti-fouling paint removal ! AFTER

BEFORE

AFTER

BEFORE