CMI3000 MIG Welder Intelligent, versatile MIG with user-friendly controls The CMI3000 is a versatile, upgradable MIG/MAG welding machine using flash-card and inverter technology. The CMI3000 was developed for modern car body work, including a variety of steels, aluminum, and MIG Brazing. The true spray pulse and Quattro Pulse capabilities make this an ideal welder for structural aluminum repairs. Full digital control
MIG-A-CARD updates the welder
THE CAR-O-LINER CMI3000 with full digital control is the forth generation of CAR-O-LINER’s advanced power source with ECO friendly, standby facilities.
The intergrated MIG-A-CARD provides the welder with all the latest welding data and automatically adjusts the weld setting for new materials The database is continually updated with the latest information regarding new materials, wires and gases and can easily be transferred into the welder.
Features and Benefits • Large, user friendly controls allow technician to focus on welding • History menu allows for saving of the latest welding current data • Quattro pulse allows storage in sequences • Compact, versatile and upgradeable • MIG brazing as standard • Extremely powerful with welding current up to 12,000 Amps
MIG-A-CARD is the key to success. Insert the card into the welder and it will automatically update the internal memory. MIG-A-CARD will allow you to easily upgrade to future welding requirements
Car-O-Liner Company • 29900 Anthony Drive Wixom, MI 48393-3609 • Tel: +1 248 624 5900 • 1 800 521 9696 www.car-o-liner.com • info@car-o-liner.com
• Standby capability
US
MIG brazing CAR-O-LINER’s many years of close cooperation with leading car manufacturers has resulted in a wealth of experience in the joining of special alloyed steels. MIG BRAZING with the CMI300 is the perfect choice when welding galvanised and high strength steels as this method allows for the maintainance of anti-corrosion coatings and structural strength.
Item
Part No.
CMI3000 230V 60Hz, 3 phase Automotive Software
34558
CMI3000 2WF 230V 60Hz, 3 phase Two wire feed system
34559
Feed rolls 1.0 mm ALU Wire. Torch PL 150F 3 m Feed rolls 0.8 mm Steel Wire. Torch PL 150F 3 m
Accessories
Article No.
Aluminium wire AlMg 5 1.0 mm 2 kg
35178
AlMg 5 1.0 mm 6 kg
34344
Galvanized wire SG1 0.8 mm 5 kg
34345
SG1 0.8 mm 15 kg
34346
MIG-brazing wire CuAl 8 1.0 mm 5 kg
34049
MIG-brazing wire CuSi 3 1.0 mm 5 kg
34202
Gas regulator 30 l
34203
Adapter for 5 kg reel
33509
Quattro Pulse Input voltage
230V - 500V (+/- 15%) 60Hz 3 phase
Fuse
30A
Current range DC
15 - 300A
Duty cycle 60 % at 20
300A
Open circuit consumption
40 Watt
Mains voltage max
15.5A
Efficiency
0.85
Power factor
0.90
Open circuit voltage
15 - 68V
Dimensions L × W × H
27" x 11" x 25" (69 × 27 × 63 cm)
Weight (incl. supply cable)
71 lbs (32 kg)
Wire feed rate
1.6 - 78.7 ft/min (0,5 - 24 m/ min)
©Car-O-Liner AB 2012-10
Quattro pulse contributes to a first rate weld with minimum weld-spatter.
Technical Data
The CMI3000 is equipped with CAR-O-LINER’s revolutionary Quattro pulse which enables the welder to produce the optimum droplet pinch off of the wire. This is particularly important in thin materials as it keeps the heat imput to a minimum consequently maintaining the strength and anti-corrosion coating of the steel while at the same time producing a tiglike weld.
www.car-o-liner.com
CAR-O-LINER is recognized for its leadership in the marketplace by continuously delivering high quality products and exceptional customer service.
Distributor: