For Conductor SL customers All Conductor SLs use the pin type connection. For Conductor customers There are two types of USB module connection for the Conductor (pin type and cable type). If you have a Conductor and you are about to order your new CM6631 USB module then please follow these two steps and let us know which connection type you need. 1. Please remove the top plate of your Conductor with a standard 2.5mm Allan key. 2. Look at the USB module (as below). 3. If you see your module are just like the photo below your module are CABLE Connection (left photo). If your module does not have the soldering point in the highlighted area you have the PIN Connection (right photo). Once you have identified your connection type, then please inform us in the Checkout Comment.
Cable Connection
Pin Connection