6 minute read
PROJECTS: BROKEN EDGES
------------------------------------------ BROKEN EDGES ----------------------------------------------Broken Edges What you’ll need:
• 13-01-Broken Edges SVG files • White cardstock • Purple cardstock • Green cardstock • Gold metallic cardstock • Acetate • Brown ribbon • Pearl gems
PROJECT 13
1Cut all the pieces needed to create the project as listed below;
From SVG downloads:
• From gold metallic cardstock: - 1 x BE-1-Lace Detail • From green cardstock: - 1 x BE-1-Happy Birthday • From white cardstock: - 1 x BE-1-Happy Birthday • From acetate: - 1 x BE-1-Lace Mat • From charisma: - 1 x BE-1-Charisma A - 1 x BE-1-Charisma B
From machine memory:
• From white cardstock: - 1 x 255mm x 180mm rectangle • From purple cardstock: - 1 x 45mm x 170mm rectangle - 2 x 15mm x 170mm rectangle
2On the large white rectangle, from each edge, measure in at 60mm and 100mm and score and fold to create the card base. Mat the large purple rectangle onto the middle panel of the card and the two thinner rectangles onto the outer panels of the card. Mat two of the floral cuts onto the outer panels of the card.
3Mat the gold lace detail onto the acetate mat and mat onto the middle panel of the card.
4Trim the remaining floral cuts as shown. 5 Build up the decoupage of the florals and mat together with foam tape. Mat onto the card.
6Mat the green happy birthday cut onto the white happy birthday cut slightly offsetting it. Mat onto the card tucking it into the gold lace detail cut. Tie a double loop bow from brown ribbon and mat onto the card. Finish by adding pearl gems to outer panels of the card.
2 3
What you’ll need:
• 14-02-Broken Edges SVG files • White cardstock • Purple cardstock • Green cardstock • Gold metallic cardstock • Charisma • Gold pearl gems
1Cut all the pieces needed to create the project as listed below;
From SVG downloads:
• From white cardstock: - 1 x BE-2-Card Base A - 1 x BE-2-Card Base B - 1 x BE-2-Lace Mat • From gold metallic cardstock: - 1 x BE-2-Middle Detail - 1 x BE-2-Just for You • From purple cardstock: - 1 x BE-2-Outer Detail - 1 x BE-2-Inner Detail • From charisma: - 1 x BE-2-Charisma A - 1 x BE-2-Charisma B
From machine memory:
• From green cardstock: - 2 x 30mm x 105mm rectangles
2Fold on the score lines of the card bases and attach together using the tabs to create a stepper card. Mat the two green rectangles onto the side steps at either side of the card. Mat the purple outer detail detail cut onto the lace mat and mat onto the middle panel of the card.
3Using three of the large floral cuts, trim into the cuts as shown. 4 Build up the decoupage and mat together with foam tape. Mat onto the card. Mat the gold middle detail cut onto the card leaving some areas raised. Tuck and stick some of the smaller florals into the raised area of the gold cut. 5 Mat the purple inner detail cut onto the card making sure to leave the top areas unstuck. Tuck the remaining florals behind and on top of the purple detail cut with foam tape.
6Mat the Just For You cut onto the card. Finish by adding gold pearls onto the bottom corners of the card.
1 2 3
What you’ll need:
• 15-03-Broken Edges SVG files • White cardstock • Green cardstock • Gold metallic cardstock • Acetate • White pearls • White ribbon
1Cut all the pieces needed to create the project as listed below;
From SVG downloads:
• From white cardstock: - 2 x BE-3-Lace Mat • From gold metallic cardstock: - 1 x BE-3-With Love • From green cardstock: - 1 x BE-3-Lace Detail • From acetate: - 1 x BE-3-Lace Mat • From charisma: - 2 x BE-3-Charisma A - 1 x BE-3-Charisma B
2On one of the white lace mat cuts, measure down 15mm from the top edge and score and fold to create a tab. Fold in half horizontally and attach to the other cut using the tab to create an easel card. Mat the green lace detail onto the acetate lace mat and mat onto the front of the easel.
3Trim the large floral cuts as shown.
4Build up the decoupage and mat together with foam tape to create two arrangements. Mat onto the front of the easel.
5Trim the smaller floral cuts as shown. 6 Build up the decoupage and mat together with foam tape onto the base of the card to create a stopper. Mat the gold With Love cut onto the card front. Tie a double loop bow from white ribbon and mat onto the base of the card. Finish by adding pearls.
top tip...
Don't worry about cutting the decoupage exactly like in the image. As long as you cut enough layers to build up it will look great!
2 3
What you’ll need:
• 16-04-Broken Edges SVG files • White cardstock • Green cardstock • Purple cardstock
1Cut all the pieces needed to create the project as listed below;
From SVG downloads:
• From white cardstock: - 1 x BE-4-Card Base A - 1 x BE-4-Card Base B - 1 x BE-4-Inner Detail • From purple cardstock: - 1 x BE-4-Detail Mat • From charisma: - 1 x BE-4-Charisma
From machine memory:
• From green cardstock: - 1 x 95mm square - 1 x 50mm x 95mm square
2Attach the card bases together using the tab and fold on the score line to create the card. Mat the green square onto the front of the card and the rectangle onto the inside back of the card.
3Mat the white inner detail onto the purple detail mat, leaving the detailed part of the cut unstuck. Mat onto the card.
4Trim the large floral cuts as shown.
5Build up the decoupage and mat together with foam tape to create two arrangements. Mat onto the card. 6 Arrange and tuck the small floral cuts under and onto the white cut and mat with foam tape.
1 2 3
