2 minute read

SPECIAL FEATURE: MAILBOX GIFT BOX

Mailbox Gift Box Gift Box ------------------------------------------ MAILBOX GIFT BOX --------------------------------------------

PROJECT 33

Advertisement

What you’ll need:

• 33-01-Mailbox Gift Box SVG files • Split pin

1Cut all the pieces needed to create the project as listed below;

From SVG downloads:

• From backing paper: - 2 x MGB-1-Box Back (words) - 1 x MGB-1-Box Base (words) - 1 x MGB-1-Box Sides (words) - 1 x MGB-1-Door Front (heart spots) - 1 x MGB-1-Door Sides (heart spots) - 1 x MGB-1-Flag (heart spots) - 1 x MGB-1-Flag Reverse (heart spots) - 1 x MGB-1-Hearts 1 (words) - 1 x MGB-1-Hearts 2 (heart spots)

2Attach the box back to the box base using the tab.

3Attach the box sides to the box base using the tab.

4Start to attach the box sides to the box back by attach the tabs, and curving the side piece as you go. Continue until the box side piece reaches the other side of box base, and attach the other tab.

5Attach the door side to one of the door fronts using the tab.

6Curve the door side piece around the door front attaching the tabs as you go.

7Fit the door to the inside of the box using the tab.

8Cut the tab off the other door front piece, and mat this onto the inside of the door to hide the tabs.

9Mat the two flag pieces back-to-back. Pierce a hole through the bottom of the flag and through the side of the mail box towards the back. Attach the flag to the mail box using a split pin. 10Decorate the box with the hearts, as desired. Cut more hearts if needed. Use any remaining hearts inside the box as confetti!

1

3

6 2

This article is from: