AUSTRALIAN ENVIROBLAST PTY LTD (AEB)
Capability Statement
2
AEB | CAPABILITY STATEMENT
About us Australian Enviroblast was founded in 2009 by Mark Chiappin with the aim of introducing environmentallyfriendly abrasive blasting services to Australia. Using the revolutionary and technologically-advanced Quill Falcon Precision Dustless Kwikblast System, the Australian Enviroblast team of trained and skilled operators is able to remove a wide range of coatings, corrosion and residues from all types of structures, locations and equipment, while leaving surfaces clean, contaminant free and thoroughly prepared for re-coating. We have vast experience of jobs both large and small. With a fleet of mobile equipment, Australian Enviroblast is able to carry out on-site abrasive blasting and industrial coating, and offers efficient, flexible and cost-effective 3
AEB | CAPABILITY STATEMENT
solutions that deliver outstanding results on both largescale and more intricate, delicate jobs. Furthermore, the Quill Falcon Precision Dustless KwikblastÂŽ System is extremely safe and requires no encapsulation, meaning that other trades can carry out work at the same time, saving both time and money. Australian Enviroblast is licensed by the Environmental Protection Agency and adheres to its high standards of environmental safety with regards to air quality, noise, water quality and waste management. The company has won contracts in both the public and private sectors, including markets such as oil, gas, shipping, construction and the highways.
4
AEB | CAPABILITY STATEMENT
Key services
5
01 Flexible onsite service
02 Environmentally-friendly
03 Range of services
Our flexible on-site abrasive blasting and industrial coating application means that we are able to meet the needs of customers across Adelaide and throughout Australia. Our large fleet of equipment allows us the versatility to mobilise to multiple sites anywhere at short notice in order to meet the demands of any project large or small, domestic, commercial, industrial or marine.
Wet abrasive blasting is a safe, environmentally-friendly and cost effective way of removing rust, grease, paint, stains, and other types of coatings, corrosion and residue from almost any type of surface. It is also an effective means of smoothing, roughing up, or reshaping different types of surfaces and structures, and can also be used to create decorative finishes on concrete.
We possess the appropriate accreditation, quality systems and insurance to be able to provide dustless abrasive blasting and industrial coating services across a range of industries and sectors: • marine (naval, commercial, barges, fishing industry, private and pleasure vessels) • WWTP (waste water treatment plants and desalination plants) • transport and infrastructure (bridges and wharves, building restoration) • energy and resources (mining equipment, flares, storage tanks) • line removal, concrete repair and exposing aggregate (non-skid, timber, fibreglass, aluminium) • construction and restorations
AEB | CAPABILITY STATEMENT
6
AEB | CAPABILITY STATEMENT
Marine abrasive blasting services Naval, commercial, barges, fishing Industry vessels and private vessels
Australian Enviroblast is a specialist in abrasive blasting and protective coatings for all types of marine vessels, structures and equipment. Wet abrasive blasting has proven itself to be the most effective costefficient means of removing contaminants and marine build up from ships, boats and yachts of all types, as well as all kinds of marine-based structures, machinery and equipment. Using the Quill Falcon Kwikblast System, abrasive blasting is able successfully to remove all of the following from boats hulls and decking, and marine machinery and structures:
oil grease corrosion soluble salts chloride sulphates 7
AEB | CAPABILITY STATEMENT
chemicals old coatings old paint layers algae barnacles grime and dirt
rust paint bitumen mill scale surface contaminants
8
AEB | CAPABILITY STATEMENT
At Australian Enviroblast, our abrasive blasting services have successfully been employed on steel warships, submarines and destroyers, fibreglass mine sweepers, wooden fishing boats, aluminium research vessels, oil containers, LNG vessels and cargo ships. Abrasive blasting can be used for: fabric maintenance repainting programmes cleaning debris from ballast tanks cleaning debris from surfaces prior to welding
The effective removal of corrosion, especially rust, from the hull, propellor, motor and other surfaces of boats and ships is essential to preserving their longevity and effectiveness. Wet abrasive blasting enables affected surfaces to be stripped back to a corrosion-free base that can then be protectively coated. Proper preparation before protective coating takes place is vital because it has a greater effect on the performance and reliability of the coating more than any other factor. If the preparation of a surface for coating is poor, the
9
AEB | CAPABILITY STATEMENT
removing coatings prior to NDT preparation cleaning debris from cable trays removing sea growth from steel structures cleaning debris from decking
ultimate performance of that coating will likewise be poor. The Quill Falcon Kwikblast System creates surfaces on which coatings can be successfully applied, which contributes significantly to the longevity and quality of these coatings. Abrasive blasting profiles the surface area in such a way that the coating is able effectively to anchor itself to the small peaks and valleys of the blasted surface and thus adheres better.
Building restoration and renovation Heritage, industrial, commercial, retail and domestic buildings
10
Abrasive blasting can be used for a variety of purposes in the restoration and renovation of all types of buildings and structures, including domestic and commercial premises as well as all types of industrial and manufacturing spaces.
at removing paint from all types of surfaces, including brick, concrete, timber, ceramic tiles, sandstone, bluestone and limestone, and the walls and floors of all kinds of domestic, commercial, retail and industrial buildings.
Using the Quill Falcon Kwikblast Dustless Blasting System, our abrasive blasting services are especially effective
Stripping away old, existing layers of paint is vital before repainting, as it cleans away all residual paint layers leaving an
AEB | CAPABILITY STATEMENT
extremely smooth, even finish that is the ideal preparation for repainting. Likewise, abrasive blasting strips away oil and mould stains, residue and corrosion from all types of stone and brickwork and restores all types of surfaces to pristine condition.
11
AEB | CAPABILITY STATEMENT
12
01 Fire and Flood
03 Walkways, Tiles
02 Timber Surfaces
04 Heritage
Repair
and Car Parks
and Structures
Restorations
Properties that have been damaged by fire and flood can benefit from wet abrasive blasting as part of their remediation. Less labour-intensive and without involving any chemicals, damaged interiors and exteriors can be restored to a state where restoration and renovation can take place. Wet abrasive blasting can remove soot, mould, odours and stains, and profiles surfaces so that they are ready for repainting, plastering or rendering.
Our flexible on-site wet abrasive blasting is an effective means of cleaning mould, grease, oil and other slippery deposits from paths, walkways, car parks and driveways in commercial environments. In addition, concrete aggregate can be exposed by abrasive blasting to create non-slip surfaces and is perfect for use in public spaces such as shopping centres, schools, industrial parks, and commercial premises. Non-slip surfaces can be created by wet abrasive blasting in a variety of materials and surfaces, including concrete, tiles and pavers.
Although it is powerful and fastworking, wet abrasive blasting is also extremely gentle and so can be used on soft surfaces and delicate materials. This includes wood and timber, enabling stains, mould, paint and graffiti to be removed from all kinds of wooden structures and surfaces.
Heritage buildings located within high-density areas are particularly prone to suffering from traffic and environmental pollution and degradation. Sandstone and bluestone, historically the stones used in the majority of Adelaide buildings, can become severely discoloured and this leads not only to a deterioration in appearance but also to the overall integrity of the stone as result of decay.
AEB | CAPABILITY STATEMENT
However, wet abrasive blasting using the Quill Falcon Kwikblast Dustless Blasting System means that years of soot, grime and fumes build up can be removed quickly but without causing any damage to the surface. More gentle than sandblasting and other types of high pressure cleaning, abrasive blasting is ideal for use on softer stones like sandstone, bluestone limestone and masonry.
Industrial wet abrasive blasting services Industrial, manufacturing and mining equipment, machinery and structures
Abrasive blasting using the Quill Falcon Kwikblast Dustless Blasting System is the ideal process for prolonging the life and performance of a wide range of industrial and mining equipment, machinery and structures. It reduces the effects of corrosion and other forms of abrasion, caused by operating in extreme heat conditions, excessive wear and tear, and exposure to chemicals and other corrosive materials. Abrasive blasting enables affected surfaces to be effectively and efficiently stripped back to a corrosion free base that can then be protectively coated. We combine our wet abrasive blasting services with industrial coating application, which means that industrial machinery and equipment is protected in harsh conditions and can continue to function effectively and efficiently, reducing downtime as well as the need for costly repairs and replacement.
13
AEB | CAPABILITY STATEMENT
14
AEB | CAPABILITY STATEMENT
At Australian Enviroblast (AEB), we offer onsite abrasive blasting and industrial coating services that include full encapsulation and waste disposal so that the work of other trades onsite is able to continue, while our accreditation by the EPA also means that we are able to operate in environmentally-sensitive areas. We are able to tackle jobs of all sizes, from delicate or intricate machinery, to large storage tanks, to earthmoving and mining equipment, and our experience and expertise means that we can guarantee completing all work to your satisfaction and specifications. Our dustless abrasive blasting services can be used to clean and preserve a large range of machinery, equipment and structures, including: plant and equipment buildings and bridges storage tanks process tanks flare towers and tanks industrial and mining machinery
15
AEB | CAPABILITY STATEMENT
earthmoving equipment excavators, dozers and wheel loaders dump trucks and trailers pipelines any type of steel, brick or concrete surface farming machinery and equipment
Protective coating services Marine, industrial, manufacturing and mining equipment
Corrosion-resistant surface treatments are essential to extending the life of metal machinery and equipment in environments where corrosion is a constant threat, be it from extreme temperatures, moisture, chemicals or salt spray. Effectively treating metal surfaces in this way gives them far greater protection against the weather and other dangers.
16
AEB | CAPABILITY STATEMENT
At Australian Enviroblast (AEB), we specialise in the application of industrial coatings that protect treated surfaces, components and equipment from the effects of corrosion and other forms of degradation, and we are able to use and apply a wide variety of coatings to meet your needs and the demands of the work environment.
17
AEB | CAPABILITY STATEMENT
Industrial coatings improve both the appearance and longevity of equipment and machinery in harsh environments, and in conjunction with our wet abrasive blasting services, provide comprehensive protection against corrosion, abrasion and the impact of chemicals and weather for all types of structures and materials, particularly steel structures, components and machines. Wet abrasive blasting with the Quill Falcon Kwikblast Dustless Blasting System means that surfaces are prepared and profiled so that newly-applied protective coatings can be at their most effective, adhering better for longer. Any coating will ultimately fail if the surface is not properly treated and prepared, and so wet abrasive blasting makes sure that coatings stay in place and offer protection for valuable plant and machinery.
18
AEB | CAPABILITY STATEMENT
Accreditations
19
Environmental Protection Agency (EPA) certified
Business SA/Chamber of Commerce and Industry in South Australia
Akzo Nobel/ International coatings approved applicator
Painting Contractor Certification Program (PCCP) accredited
Denso approved applicator
Valspar approved applicator
AEB | CAPABILITY STATEMENT
PPG approved applicator
Jotun approved applicator
20
AEB | CAPABILITY STATEMENT
Abrasive blasting case study
Noble Pearl, Adelaide
The Noble Pearl, a 25.61m fishing boat, is one of fifteen vessels owned and operated by Raptis. It was up for its two-year survey, which involved wet abrasive blasting and re-coating both above and below the water line. The first step was to give the entire boat a pressure wash and to clean it up below the water line. We then undertook spot abrasive blasting in places, which involves feathering over a particular spot to clean out the rust. This was followed by sweep blasting, where we wave over the entire surface. Following abrasive blasting, we then applied new coatings to the boat. The first layer was high-build epoxy everywhere both above and below the water line. We then applied a polyurethane top coat above the water line, while below the water line received a tie coat. This was then followed by two coats of antifoul paint. In this process, we use two-pack industrial marine coatings. We then completed the job by painting in the draft and plimsoll marks. Overall, the job took us about 12 days to complete, with 3 - 4 workers on site at any one time. All of the workforce at AEB are blaster-painters who have their EWP and confined spaces tickets.
21
AEB | CAPABILITY STATEMENT
22
AEB | CAPABILITY STATEMENT
Wet abrasive blasting is so effective on this type of job, and is preferred over conventional dry sandblasting or grit blasting, because very little dust is produced, and so other trades in the immediate vicinity are not prevented from working. With wet abrasive blasting, all the media falls within a 3 - 5m radius; with conventional dry blasting or media blasting, the media can sometimes fall as far as 20m away.
The process for cleaning a boat like the Noble Pearl is also different when you utilise wet abrasive blasting as opposed to dry grit blasting.
In addition, wet abrasive blasting uses half the media of conventional dry sandblasting. It also removes salts and chlorides from a ships’s surface and hull more effectively, which means that anti-fouling paints and marine industrial coatings adhere to the surface better and so last longer.
This means that the surface is cleaner with salts and chloride having been removed more effectively, saving time and money in the process. This also means that coatings and anti-foul paint adhere better and so do a more effective job for longer.
Water in the job was used at the rate of 0.5 litres per minute, so in a day’s blasting we would expect to use between 200 - 250 litres.
23
AEB | CAPABILITY STATEMENT
Dry blasting would involve washing the boat with water, dry blasting, and then washing again. With wet abrasive blasting, the ship is blasted first, followed by a pressure wash, then marine industrial coatings are applied.
Australian Enviroblast Pty Ltd info@australianenviroblast.com.au www.aeb.com.au tel: 0458 455668