Caledonian ULV Cables
-BMS (Building Management System)
www.airport-cables.com
Caledonian
BMS (Building Management System) Digital Signal Cable FFX200 05mRZ1-R/F 2G1.0 FFX200 05mRZ1-R 2G1.0 (CU/MGT+XLPE/LSZH 2×1.0mmsq 300/500V class 2) FFX200 05mRZ1-F 2G1.0 (CU/MGT+XLPE/LSZH 2×1.0mmsq 300/500V class 5)
m o
Plain Annealed Copper Mica+XLPE Insulation
c . s e l b a LSZH Outer Sheath
APPLICATIONS
The cables are multicore stranded flexible cables sheathed with thermoplastic LSZH compound. The cables have the ability to restrict the propagation of the flame in the event of a fire. This is especially important to slow down the spreading of the fire as the cables may pass from one area to another within a building. Applications can be found in control and power circuits, power stations, underground tunnels, lifts, escalators, and high-rise buildings.
o p r i a . w
STANDARDS
c rt
Basic design
BS 7629-1
Halogen Free
IEC 60754-1
No corrosive gas emission
IEC 60754-2
Minimum Smoke Emission
IEC 61034-1/2
Reduced Fire Propagation
IEC 60332-3C / NF C 32070-2.2 (C1)
Flame Retardance
IEC 60332-1 / NF C 32-070-2.1 (C2)
Fire Resistance
IEC 60331 / NF C 32070-2.3(CR1)
w w
VOLTAGE RATING 300/500V
CABLE CONSTRUCTION Conductor: Plain annealed copper wire, stranded according to IEC(EN) 60228 class 2 or class 5. Insulation: Mica glass tape covered by extruded cross-linked XLPE compound. Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1.
ADDISON
29
ADDISON Electrical PROPERTIES Dielectric test:
2000 V r.m.s. x 5’ (core/core)
Insulation resistance
1000 MΩ x km (at 20°C)
Short circuit temperature
250°C
Physical AND THERMAL PROPERTIES Temperature range during operation (fixed state): -30°C – +90°C Temperature range during installation (mobile state): -20°C – +50°C Minimum bending radius: 8 × Overall Diameter
FFX200 05mRZ1-R 2G1.0 FFX200 05mRZ1-F 2G1.0 Nominal Cross No.of core Sectional Area mm2
Number & Nominal Diameter of Strands No/mm
Nominal Insulation Thickness
Nominal Sheath Thickness
Nominal Overall Diameter
Approx. Weight
mm
mm
mm
kg/km
0.5
7.1
58
0.5
7.1
58
o p r N .ai w w w 2
1.0
7/0.44
2
1.0
32/0.2
BS 7629-1
c rt 0.5
0.5
Zero
Standard
Reduced Fire Propagation NF C32-070-2.2(C1) IEC60332-3-24 EN50266-2-4
30
Caledonian
Halogen Free IEC60754-1
Flame Retardancy NF C32-070-2.1(C2) IEC60332-1-2/EN50265-2-1
m o
c . s e l b a
CONSTRUCTION PARAMETERS
Low Corrosivity IEC60754-2 EN50267-2-2/3 NF C 32-074
Fire Resistance IEC 60331 /NF C 32070-2.3(CR1)
Low Smoke Emission IEC 61034-1&2 EN 50268-1&2/NF C32-073
Caledonian ULV Cables
-BMS (Building Management System)
www.airport-cables.com
Caledonian
BMS (Building Management System) Analog Signal Cable FFX200 05mROZ1-R/F 2G1.0 FFX200 05mROZ1-R 2G1.0 (CU/MGT+XLPE/OSCR/LSZH 2×1.0mmsq 300/500V class 2) FFX200 05mROZ1-F 2G1.0 (CU/MGT+XLPE/OSCR/LSZH 2×1.0mmsq 300/500V class 5)
LSZH Outer Sheath
m o
Plain Annealed Copper Mica+XLPE Insulation
c . s e l b a
AL/Polyester Tape With Tinned Copper Drain Wire
APPLICATIONS The cables are multicore stranded flexible cables sheathed with thermoplastic LSZH compound. The cables have the ability to restrict the propagation of the flame in the event of a fire. This is especially important to slow down the spreading of the fire as the cables may pass from one area to another within a building. Applications can be found in control and power circuits, power stations, underground tunnels, lifts, escalators, and high-rise buildings.
o p r i a . w
STANDARDS
c rt
Basic design
BS 7629-1
Halogen Free
IEC 60754-1
No corrosive gas emission
IEC 60754-2
Minimum Smoke Emission
IEC 61034-1/2
Reduced Fire Propagation
IEC 60332-3C / NF C 32070-2.2 (C1)
Flame Retardance
IEC 60332-1 / NF C 32-070-2.1 (C2)
Fire Resistance
IEC 60331 / NF C 32070-2.3(CR1)
w w
VOLTAGE RATING 300/500V
CABLE CONSTRUCTION
Conductors: Plain annealed copper wire, stranded according to EN 60228 class 2 or class 5. Insulation: Mica glass tape covered by extruded cross-linked XLPE compound. Cable elements: Insulated cores are twisted to form pairs. Cabling: Pairs are cabled together. Overall screen: Aluminum/polyester tape with copper drain wire. Outer sheath: Thermoplastic LSZH compound.
ADDISON
31
ADDISON COLOUR CODE Insulation Colour: According to IEC 60189-2 (other colour code on request). Sheath Colour: Colour red (other colours on request). Electrical PROPERTIES Dielectric test:
2000 V r.m.s. x 5’ (core/core)
Insulation resistance
1000 MΩ x km (at 20°C)
Short circuit temperature
250°C
m o
Physical AND THERMAL PROPERTIES
c . s e l b a
Temperature range during operation (fixed state): -30°C – +90°C Temperature range during installation (mobile state): -20°C – +50°C Minimum bending radius: 8 × Overall Diameter CONSTRUCTION PARAMETERS FFX200 05mROZ1-R 2G1.0 FFX200 05mROZ1-F 2G1.0 Nominal Number & No.of Cross Nominal core Sectional Diameter of Area Strands 2 No/mm mm 2 2
1.0
7/0.44
c rt 0.6
0.8
7.2
64
1.0
32/0.2
0.6
0.8
7.2
64
Nominal Insulation Thickness
Nominal Sheath Thickness
Nominal Overall Diameter
Approx. Weight
mm
mm
mm
kg/km
o p r i a . w
N w BS 7629-1
w
Standard
Reduced Fire Propagation NF C32-070-2.2(C1) IEC60332-3-24 EN50266-2-4
32
Caledonian
Zero
Halogen Free IEC60754-1
Flame Retardancy NF C32-070-2.1(C2) IEC60332-1-2/EN50265-2-1
Low Corrosivity IEC60754-2 EN50267-2-2/3 NF C 32-074
Fire Resistance IEC 60331 /NF C 32070-2.3(CR1)
Low Smoke Emission IEC 61034-1&2 EN 50268-1&2/NF C32-073
Caledonian ULV Cables
-BMS (Building Management System)
www.airport-cables.com
Caledonian
BMS (Building Management System) RS485 Data Cable RE-02Y(St)H 1P18A RE-02Y(St)H 1P18A (CU/PE/OSCR/LSZH 1Ă—2Ă—18AWG)
LSZH Outer Sheath Fireproof tape
m o
Stranded Tinned Copper PE Insulation
c . s e l b a
Overall AL/Polyester Tape With Tinned Copper Drain Wire
APPLICATIONS
The cables are designed for RS485 data connections. This cable combines low capacitance insulation with one of the highest levels of screening to provide high speed, interference free, data transmission where continued functionality is required during a fire situation.
o p r i a . w
STANDARDS
c rt
Basic design Halogen Free
EIA/TIA 485 IEC 60754-1
No corrosive gas emission
IEC 60754-2
Minimum Smoke Emission
IEC 61034-1/2
Reduced Fire Propagation
IEC 60332-3C / NF C 32070-2.2 (C1)
Flame Retardance
IEC 60332-1 / NF C 32-070-2.1 (C2)
Fire Resistance
IEC 60331-23 / NF C 32-070-2.3(CR1)
w w
CABLE CONSTRUCTION
Conductors: tinned annealed copper wire, stranded according to IEC(EN) 60228 class 2 or class 5. Insulation: Solid or foam PE compound Cabling Elements: Insulated cores are twisted to form pairs with varying lay length to minimize crosstalk. Overall screen: Aluminum/ polyester tape with tinned copper drain wire. Fire Barrier: Fireproof Tape. Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1.
ADDISON
33
ADDISON Electrical Properties Dielectric test
1000 V r.m.s. for 5’ (core-core) 1000 V r.m.s. for 5’ (core-screen)
Impedance
120Ω
Capacitance
45 nF/km conductor to conductor 90 nF/km conductor to shield
m o
Physical AND THERMAL PROPERTIES
c . s e l b a
Temperature range during operation (fixed state): -30°C – +90°C Temperature range during installation (mobile state): -20°C – +50°C Minimum bending radius: 8 × Overall Diameter CONSTRUCTION PARAMETERS RE-02Y(ST)H 1P18A
c rt
Wire Gange
Number & Nominal Diameter of Strands
Nominal Insulation Thickness
Nominal Sheath Thickness
Nominal Overall Diameter
Approx. Weight
AWG
No/mm
mm
mm
mm
kg/km
1
18
7/0.404
1.15
1.2
10.5
100
1
18
16/0.254
1.15
1.2
10.5
100
No.of pair
o p r i a . Nw w w EIA/TIA 485
Zero
Standard
Reduced Fire Propagation NF C32-070-2.2(C1) IEC60332-3-24 EN50266-2-4
34
Caledonian
Halogen Free IEC60754-1
Flame Retardancy NF C32-070-2.1(C2) IEC60332-1-2/EN50265-2-1
Low Corrosivity IEC60754-2 EN50267-2-2/3 NF C 32-074
Fire Resistance IEC 60331 /NF C 32070-2.3(CR1)
Low Smoke Emission IEC 61034-1&2 EN 50268-1&2/NF C32-073
Caledonian ULV Cables
-BMS (Building Management System)
www.airport-cables.com
Caledonian
BMS (Building Management System) Temperature Control Cable FFX200 05mRZ1-R/F 6G0.5 FFX200 05mRZ1-R 6G0.5 (CU/MGT+XLPE/LSZH 6×0.5mmsq 300/500V class 2) FFX200 05mRZ1-F 6G0.5 (CU/MGT+XLPE/LSZH 6×0.5mmsq 300/500V class 5)
Plain Annealed Copper
LSZH Outer Sheath
APPLICATIONS
m o
c . s e l b a Mica+XLPE Insulation
c rt
The cables are multicore stranded flexible cables sheathed with thermoplastic LSZH compound. The cables have the ability to restrict the propagation of the flame in the event of a fire. This is especially important to slow down the spreading of the fire as the cables may pass from one area to another within a building. Applications can be found in control and power circuits, power stations, underground tunnels, lifts, escalators, and high-rise buildings.
o p r i a . w
STANDARDS Basic design
BS 7629-1
Halogen Free
IEC 60754-1
w w
No corrosive gas emission
IEC 60754-2
Minimum Smoke Emission
IEC 61034-1/2
Reduced Fire Propagation
IEC 60332-3C / NF C 32070-2.2 (C1)
Flame Retardance
IEC 60332-1 / NF C 32-070-2.1 (C2)
Fire Resistance
IEC 60331 / NF C 32070-2.3(CR1)
VOLTAGE RATING 300/500V
CABLE CONSTRUCTION Conductor: Plain annealed copper wire, stranded according to IEC(EN) 60228 class 2 or class 5. Insulation: Mica glass tape covered by extruded cross-linked XLPE compound. Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1.
ADDISON
35
ADDISON Electrical PROPERTIES Dielectric test:
2000 V r.m.s. x 5’ (core/core)
Insulation resistance
1000 MΩ x km (at 20°C)
Short circuit temperature
250°C
Physical AND THERMAL PROPERTIES Temperature range during operation (fixed state): -30°C – +90°C Temperature range during installation (mobile state): -20°C – +50°C Minimum bending radius: 8 × Overall Diameter
FFX200 05mRZ1-R 6G0.5 FFX200 05mRZ1-F 6G0.5 Nominal Number & No.of core Cross Nominal Sectional Diameter of Area Strands 2 mm No/mm 6
0.5
7/0.31
6
0.5
16/0.2
Nominal Insulation Thickness
Nominal Sheath Thickness
Nominal Overall Diameter
Approx. Weight
mm
mm
mm
kg/km
0.5
0.5
2.9
61
0.5
0.5
2.9
61
o N airp . w w w BS 7629-1
Zero
Standard
Reduced Fire Propagation NF C32-070-2.2(C1) IEC60332-3-24 EN50266-2-4
36
Caledonian
Halogen Free IEC60754-1/ EN50267-2-1
Flame Retardancy NF C32-070-2.1(C2) IEC60332-1-2/EN50265-2-1
m o
c . s e l b a
CONSTRUCTION PARAMETERS
c rt
Low Corrosivity IEC60754-2 EN50267-2-2/3 NF C 32-074
Fire Resistance IEC 60331 /NF C 32070-2.3(CR1)
Low Smoke Emission IEC 61034-1&2 EN 50268-1&2/NF C32-073
Caledonian ULV Cables
-BMS (Building Management System)
www.airport-cables.com
Caledonian
BMS (Building Management System) Analog Signal Cable FFX200 05mROZ1-R/F 2G1.5 FFX200 05mROZ1-R 2G1.5 (CU/MGT+XLPE/OSCR/LSZH 2×1.5mmsq 300/500V class 2) FFX200 05mROZ1-F 2G1.5 (CU/MGT+XLPE/OSCR/LSZH 2×1.5mmsq 300/500V class 5)
LSZH Outer Sheath
m o
Plain Annealed Copper Mica+XLPE Insulation
c . s e l b a
AL/Polyester Tape With Tinned Copper Drain Wire
APPLICATIONS The cables are multicore stranded flexible cables sheathed with thermoplastic LSZH compound. The cables have the ability to restrict the propagation of the flame in the event of a fire. This is especially important to slow down the spreading of the fire as the cables may pass from one area to another within a building. Applications can be found in control and power circuits, power stations, underground tunnels, lifts, escalators, and high-rise buildings.
o p r i a . w
STANDARDS
c rt
Basic design
BS 7629-1
Halogen Free
IEC 60754-1
No corrosive gas emission
IEC 60754-2
Minimum Smoke Emission
IEC 61034-1/2
Reduced Fire Propagation
IEC 60332-3C / NF C 32070-2.2 (C1)
Flame Retardance
IEC 60332-1 / NF C 32-070-2.1 (C2)
Fire Resistance
IEC 60331 / NF C 32070-2.3(CR1)
w w
VOLTAGE RATING 300/500V
CABLE CONSTRUCTION Conductors: Plain annealed copper wire, stranded according to EN 60228 class 2 or class 5. Insulation: Mica glass tape covered by extruded cross-linked XLPE compound. Cable elements: Insulated cores are twisted to form pairs. Cabling: Pairs are cabled together. Overall screen: Aluminum/polyester tape with copper drain wire. Outer sheath: Thermoplastic LSZH compound.
ADDISON
37
ADDISON COLOUR CODE Insulation Colour: According to IEC 60189-2 (other colour code on request). Sheath Colour: Colour red (other colours on request). Electrical PROPERTIES Dielectric test:
2000 V r.m.s. x 5’ (core/core)
Insulation resistance
1000 MΩ x km (at 20°C)
Short circuit temperature
250°C
m o
Physical AND THERMAL PROPERTIES
c . s e l b a
Temperature range during operation (fixed state): -30°C – +90°C Temperature range during installation (mobile state): -20°C – +50°C Minimum bending radius: 8 × Overall Diameter CONSTRUCTION PARAMETERS FFX200 05mROZ1-R 2G1.5 FFX200 05mROZ1-F 2G1.5 Nominal Number & No.of Cross Nominal core Sectional Diameter of Area Strands 2 No/mm mm 2 2
w
Nominal Overall Diameter
Approx. Weight
mm
mm
mm
kg/km
o p r i a . w 7/0.53
0.6
0.8
6.5
96
1.5
30/0.25
0.6
0.8
6.5
96
Standard
Reduced Fire Propagation NF C32-070-2.2(C1) IEC60332-3-24 EN50266-2-4
38
Nominal Sheath Thickness
1.5
N w BS 7629-1
c rt
Nominal Insulation Thickness
Caledonian
Zero
Halogen Free IEC60754-1/ EN50267-2-1
Flame Retardancy NF C32-070-2.1(C2) IEC60332-1-2/EN50265-2-1
Low Corrosivity IEC60754-2 EN50267-2-2/3 NF C 32-074
Fire Resistance IEC 60331 /NF C 32070-2.3(CR1)
Low Smoke Emission IEC 61034-1&2 EN 50268-1&2/NF C32-073