Caledonian ULV Cables-PAS (Public Address System) www.airport-cables.com
enquiry@airport-cables.com
Caledonian
PAS (Public Address System)
Loudspeaker Cable FFX200 05mRZ1-R/F 2G1.0 FFX200 05mRZ1-R 2G1.0 (CU/MGT+XLPE/LSZH 2×1.0mmsq 300/500V class 2) FFX200 05mRZ1-F 2G1.0 (CU/MGT+XLPE/LSZH 2×1.0mmsq 300/500V class 5)
m o
Plain Annealed Copper
c . s e l b a Mica+XLPE Insulation LSZH Outer Sheath
APPLICATIONS
The cables are multicore stranded flexible cables sheathed with thermoplastic LSZH compound. The cables have the ability to restrict the propagation of the flame in the event of a fire. This is especially important to slow down the spreading of the fire as the cables may pass from one area to another within a building. Applications can be found in control and power circuits, power stations, underground tunnels, lifts, escalators, and high-rise buildings.
o p r i a . w
STANDARDS
c rt
Basic design
BS 7629-1
Halogen Free
IEC 60754-1
No corrosive gas emission
IEC 60754-2
Minimum Smoke Emission
IEC 61034-1/2
Reduced Fire Propagation
IEC 60332-3C / NF C 32070-2.2 (C1)
Flame Retardance
IEC 60332-1 / NF C 32-070-2.1 (C2)
Fire Resistance
IEC 60331 / NF C 32070-2.3(CR1)
w w
VOLTAGE RATING 300/500V
CABLE CONSTRUCTION Conductor: Plain annealed copper wire, stranded according to IEC(EN) 60228 class 2 or class 5. Insulation: Mica glass tape covered by extruded cross-linked XLPE compound. Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1.
ADDISON
25
ADDISON Electrical PROPERTIES Dielectric test:
2000 V r.m.s. x 5’ (core/core)
Insulation resistance
1000 MΩ x km (at 20°C)
Short circuit temperature
250°C
Physical AND THERMAL PROPERTIES Temperature range during operation (fixed state): -30°C – +90°C Temperature range during installation (mobile state): -20°C – +50°C Minimum bending radius: 8 × Overall Diameter
FFX200 05mRZ1-R 2G1.0 FFX200 05mRZ1-F 2G1.0 Nominal Cross No.of core Sectional Area mm2
Number & Nominal Diameter of Strands No/mm
o p r N .ai w w w 2
1.0
7/0.44
2
1.0
32/0.2
BS 7629-1
Zero
Standard
Reduced Fire Propagation NF C32-070-2.2(C1) IEC60332-3-24 EN50266-2-4
26
Caledonian
Halogen Free IEC60754-1
Flame Retardancy NF C32-070-2.1(C2) IEC60332-1-2/EN50265-2-1
Nominal Insulation Thickness
c rt mm 0.5 0.5
Low Corrosivity IEC60754-2 EN50267-2-2/3 NF C 32-074
Fire Resistance IEC 60331 /NF C 32070-2.3(CR1)
m o
c . s e l b a
CONSTRUCTION PARAMETERS
Nominal Sheath Thickness
Nominal Overall Diameter
Approx. Weight
mm
mm
kg/km
0.5
5.3
47
0.5
5.3
47
Low Smoke Emission IEC 61034-1&2 EN 50268-1&2/NF C32-073
Caledonian ULV Cables-PAS (Public Address System) www.caledonian-cables.co.uk
www.addison-cables.com
Caledonian
PAS (Public Address System)
RS485 Data Cable RE-02Y(St)H 1P18A RE-02Y(St)H 1P18A (CU/PE/OSCR/LSZH 1×2×18AWG)
LSZH Outer Sheath Fireproof tape
m o
Stranded Tinned Copper PE Insulation
c . s e l b a
Overall AL/Polyester Tape With Tinned Copper Drain Wire
APPLICATIONS
c rt
The cables are designed for RS485 data connections. This cable combines low capacitance insulation with one of the highest levels of screening to provide high speed, interference free, data transmission where continued functionality is required during a fire situation.
o p r i a . w
STANDARDS Basic design Halogen Free
EIA/TIA 485 IEC 60754-1
No corrosive gas emission
IEC 60754-2
Minimum Smoke Emission
IEC 61034-1/2
Reduced Fire Propagation
IEC 60332-3C / NF C 32070-2.2 (C1)
Flame Retardance
IEC 60332-1 / NF C 32-070-2.1 (C2)
Fire Resistance
IEC 60331-23 / NF C 32-070-2.3(CR1)
w w
CABLE CONSTRUCTION Conductors: tinned annealed copper wire, stranded according to IEC(EN) 60228 class 2 or class 5. Insulation: Solid or foam PE compound Cabling Elements: Insulated cores are twisted to form pairs with varying lay length to minimize crosstalk. Overall screen: Aluminum/ polyester tape with tinned copper drain wire. Fire Barrier: Fireproof Tape. Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1.
ADDISON
27
ADDISON Electrical Properties Dielectric test
1000 V r.m.s. for 5’ (core-core) 1000 V r.m.s. for 5’ (core-screen)
Impedance
120Ω
Capacitance
45 nF/km conductor to conductor 90 nF/km conductor to shield
m o
Physical AND THERMAL PROPERTIES
c . s e l b a
Temperature range during operation (fixed state): -30°C – +90°C Temperature range during installation (mobile state): -20°C – +50°C Minimum bending radius: 8 × Overall Diameter CONSTRUCTION PARAMETERS RE-02Y(ST)H 1P18A
c rt
Wire Gange
Number & Nominal Diameter of Strands
Nominal Insulation Thickness
Nominal Sheath Thickness
Nominal Overall Diameter
Approx. Weight
AWG
No/mm
mm
mm
mm
kg/km
1
18
7/0.404
1.15
1.2
10.5
100
1
18
16/0.254
1.15
1.2
10.5
100
No.of pair
o p r i a . Nw w w EIA/TIA 485
Zero
Standard
Reduced Fire Propagation NF C32-070-2.2(C1) IEC60332-3-24 EN50266-2-4
28
Caledonian
Halogen Free IEC60754-1
Flame Retardancy NF C32-070-2.1(C2) IEC60332-1-2/EN50265-2-1
Low Corrosivity IEC60754-2 EN50267-2-2/3 NF C 32-074
Fire Resistance IEC 60331 /NF C 32070-2.3(CR1)
Low Smoke Emission IEC 61034-1&2 EN 50268-1&2/NF C32-073