Rodless Cylinders Series 52

*DOC-serie 52 ING.qxd

6-04-2005

10:31

Pagina 3

Rodless Cylinders Series 52

N

E

W

S

*DOC-serie 52 ING.qxd

6-04-2005

10:31

Pagina 4

52

S E R I E S

News 2005

Rodless Cylinders Series 52

A C T U A T O R S

Double-acting, magnetic, cushioned ø 25, 32, 40

The Rodless Cylinders Series 52 are available in 3 diameters, 25, 32 and 40 mm and comes in three main versions such as Basic (M), with Slide bearing (G) and with Roller bearings (R). Furthermore these three main versions are each available with either standard- or short carriage to cover a wider range of applications.

A permanent magnet is assembled on the piston allowing the position to be detected by means of proximity switches positioned in grooves located on three sides on the cylinder profile. The cylinder is equipped with an end stroke cushioning which can be regulated by means of a screw located on each end cover of the cylinder.

The Rodless Cylinder Series 52 is also available in versions with air supply from one side (end cover) only if needed.

Three main versions, Basic, Slide bearing and Roller bearing Extra short carriage as option for all versions Possibility of feeding both chambers from one side only

001

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

*DOC-serie 52 ING.qxd

6-04-2005

10:31

Pagina 5

S E R I E S

News 2005

52

GENERAL DATA 52M2P....52M8P....

Stroke length (mm) Materials

52M2P32A 52M8P32A 32 G1/8 28 1,40 0,39

52M2P40A 52M8P40A 40 G1/4 45 2,41 0,52

is recommended.

* If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted.

GENERAL DATA 52M2C....52M8C....

Piston Ø (mm) Connection Cushioning length (mm) Mass at 0 mm stroke (kg) Additional mass per 100 mm (kg) Operating pressure (bar) Temperature range Medium Stroke length (mm) Materials

52M2C25A 52M8C25A 25 G1/8 24 0,62 0,30 1÷8 - 10 °C ÷ + 70 °C clean air, without lubrication* If speeds exceed 1 m/s lubricated air arbitrary up to 6000 Al (anodized), plastic Seals: NBR, PU

52M2C32A 52M8C32A 32 G1/8 28 0,96 0,39

A C T U A T O R S

Piston Ø (mm) Connection Cushioning length (mm) Mass at 0 mm stroke (kg) Additional mass per 100 mm (kg) Operating pressure (bar) Temperature range Medium

52M2P25A 52M8P25A 25 G1/8 24 0,88 0,30 1÷8 - 10 °C ÷ + 70 °C clean air, without lubrication* If speeds exceed 1 m/s lubricated air arbitrary up to 6000 Al (anodized), plastic Seals: NBR, PU

52M2C40A 52M8C40A 40 G1/4 45 1,65 0,52

is recommended.

* If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted.

GENERAL DATA 52G2P....52G8P....

Piston Ø (mm) Connection Cushioning length (mm) Mass at 0 mm stroke (kg) Additional mass per 100 mm (kg) Operating pressure (bar) Temperature range Medium Stroke length (mm) Materials

52G2P25A 52G8P25A 25 G1/8 24 1,31 0,30 1÷8 - 10 °C ÷ + 70 °C clean air, without lubrication* If speeds exceed 1 m/s lubricated air arbitrary up to 6000 Al (anodized), plastic Seals: NBR, PU

52G2P32A 52G8P32A 32 G1/8 28 2,09 0,39

52G2P40A 52G8P40A 40 G1/4 45 3,58 0,52

is recommended.

* If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted.

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

002

*DOC-serie 52 ING.qxd

6-04-2005

10:31

Pagina 6

52

S E R I E S

News 2005

A C T U A T O R S

GENERAL DATA 52G2C....52G8C....

Piston Ø (mm) Connection Cushioning length (mm) Mass at 0 mm stroke (kg) Additional mass per 100 mm (kg) Operating pressure (bar) Temperature range Medium Stroke length (mm) Materials

52G2C25A 52G8C25A 25 G1/8 24 0,88 0,30 1÷8 - 10 °C ÷ + 70 °C clean air, without lubrication* If speeds exceed 1 m/s lubricated air arbitrary up to 6000 Al (anodized), plastic Seals: NBR, PU

52G2C32A 52G8C32A 32 G1/8 28 1,35 0,39

52G2C40A 52G8C40A 40 G1/4 45 2,30 0,52

is recommended.

* If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted.

GENERAL DATA 52R2P....52R8P....

Piston Ø (mm) Connection Cushioning length (mm) Mass at 0 mm stroke (kg) Additional mass per 100 mm (kg) Operating pressure (bar) Temperature range Medium Stroke length (mm) Materials

52R2P25A 52R8P25A 25 G1/8 24 1,97 0,42 1,5 ÷ 8 - 10 °C÷ .+ 70 °C clean air, without lubrication* If speeds exceed 1 m/s lubricated air arbitrary up to 6000 Al (anodized), plastic, hardened steel Seals: NBR, PU

52R2P32A 52R8P32A 32 G1/8 28 2,96 0,48 1 ...8

52R2P40A 52R8P40A 40 G1/4 45 5,89 0,74 1 ...8

is recommended.

* If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted.

GENERAL DATA 52R2C....52R8C....

Piston Ø (mm) Connection Cushioning length (mm) Mass at 0 mm stroke (kg) Additional mass per 100 mm (kg) Operating pressure (bar) Temperature range Medium Stroke length (mm) Materials

52R2C25A 52R8C25A 25 G1/8 24 1,33 0,42 1,5 ÷ 8 - 10 °C ÷ + 70 °C clean air, without lubrication* If speeds exceed 1 m/s lubricated air arbitrary up to 6000 Al (anodized), plastic, hardened steel Seals: NBR, PU

52R2C32A 52R8C32A 32 G1/8 28 1,91 0,48 1 ...8

52R2C40A 52R8C40A 40 G1/4 45 3,84 0,74 1 ...8

is recommended.

* If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted.

003

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

*DOC-serie 52 ING.qxd

6-04-2005

10:31

Pagina 7

S E R I E S

News 2005

52

CYLINDER CODING

52M2P40A0500

VERSION M = standard G = with slide bearing R = with roller bearing

TYPE OF MOUNTING A = standard

OPERATION 2 = double-acting, cushioned 8 = double-acting, cushioned, with air supply from one side only

MATERIALS P = anodized AL profile tube, NBR and Polyurethane seals, standard carriage C = anodized AL profile, NBR and Polyurethane seals, short carriage

BORE 25 mm 32 mm 40 mm

LOADS AND TORQUE FORCES

A C T U A T O R S

STROKE (see table)

SERIES

Table showing the maximum permitted loads and torque forces model

L (max)

Ls (max)

M (max)

Ms (max)

Mv (max)

52M2P25A/52M8P25A 52M2C25A/52M8C25A 52G2P25A/52G8P25A 52G2C25A/52G8C25A 52R2P25A/52R8P25A 52R2C25A/52R8C25A 52M2P32A/52M8P32A 52M2C32A/52M8C32A 52G2P32A/52G8P32A 52G2C32A/52G8C32A 52R2P32A/52R8P32A 52R2C32A/52R8C32A 52M2P40A/52M8P40A 52M2C40A/52M8C40A 52G2P40A/52G8P40A 52G2C40A/52G8C40A 52R2P40A/52R8P40A 52R2C40A/52R8C40A

270 N 270 N 580 N 340 N 850 N 850 N 300 N 300 N 850 N 460 N 900 N 900 N 650 N 650 N 1120 N 600 N 1200 N 1200 N

580 N 340 N 1300 N 1300 N 850 N 460 N 1500 N 1500 N 1120 N 600 N 2000 N 2000 N

13 Nm 8 Nm 23 Nm 9 Nm 65 Nm 29 Nm 30 Nm 15 Nm 33 Nm 14 Nm 79 Nm 36 Nm 60 Nm 30 Nm 60 Nm 25 Nm 190 Nm 85 Nm

2,5 Nm 2 Nm 10 Nm 5 Nm 35 Nm 35 Nm 3 Nm 3 Nm 15 Nm 6,5 Nm 40 Nm 40 Nm 4 Nm 4 Nm 25 Nm 11 Nm 67 Nm 67 Nm

11 Nm 7 Nm 23 Nm 9 Nm 105 Nm 64 Nm 24 Nm 12 Nm 33 Nm 14 Nm 125 Nm 76 Nm 54 Nm 27 Nm 60 Nm 25 Nm 118 Nm 72 Nm

Complex loads If more than one force and torque is applied simultaneously, they have to be calculated according to the following formula: L Ls M Ms Mv + + + + ≤1 L (max) Ls (max) M (max) Ms (max) Mv (max) For models 52M, the load and torque values refer to the center of the tube.

For models 52G/52R the load and torque values refer to the center point of the guide.

The load and torque values refer to a velocity of: Models 52M/52G ≤ 0,2 m/s Models 52R ≤ 2 m/s If the velocity exceeds 0.2m/s for the models 52M/52G, the load and torque values have to be multiplied by the coefficients according to the table beside.

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

Correction coefficient, loads speed coefficient 0,2 0,3 0,4 0,5 0,75 1

m/s m/s m/s m/s m/s m/s

1 0,75 0,5 0,4 0,27 0,2

004

*DOC-serie 52 ING.qxd

6-04-2005

10:31

Pagina 8

52

S E R I E S

News 2005

The end cushion regulating screw has to be regulated to obtain a smooth movement at the end of stroke.

In those applications which have different values than the ones stated in the diagram (below), external shock-absorbers have to be used.

The shock-absorber should be centrally located with respect to the center of the mass.

The diagram applies for horizontal operations.

Velocity (m/s)

A C T U A T O R S

END CUSHION DIAGRAM

Mass (Kg)

LOADS ACCORDING TO SUPPORTS DISTANCE

The charts below have been made according to a max. deflection of 0.5 mm and 1 mm when a load (N) is applied.

The charts reported below give the max distance between two supports in order to stay within the deflection range given.

Deflection 0,5 mm

Max. distance between supports (m)

005

Deflection 1,0 mm

Max. distance between supports (m)

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

*DOC-serie 52 ING.qxd

6-04-2005

10:31

Pagina 9

S E R I E S

News 2005

52

Mod. 52M2P...

A C T U A T O R S

+ add the stroke K = cushion regulation screw The cylinder has two supply ports “I” for both endcovers.

The operator just needs to choose which one of the two ports to use on each end cover.

The remaining ports have to be closed with a tap (two taps are supplied).

DIMENSIONS Series 52M2P25A 52M2P32A 52M2P40A

ø 25 32 40

W 100 120 150

Series 52M2P25A 52M2P32A 52M2P40A

H 70 100 130

V 22 22 22

E 149,6 184,5 222,6

L1 200 240 300

I G1/8 G1/8 G1/4

B 25 25 25

G 5 5,5 7

N 19 19 23

S 45 54 64

R 60 69 82

P M4 M5 M6

TG 36 41 49

Q 11 11 12

Q1 3 4 4

L 9,5 9,5 11,5

øA H7 6 6 7

øX 4,5 5,5 6,5

S1 49 58 68

T 25 32,3 38,2

Z 4,5 7,5 7,5

C1 90 130 160

C 50 45 90

U 15 15 15

F M5 M5 M5

F1 7 7 9

Mod. 52M8P...

Where no dimensions are presented, refer to dimensions of cylinder model 52M2P, The cylinder has six ports “I” located on one endcover.

Three ports (x-h-w) to move the carriage in one direction and three (y-z-k) for the opposite direction.

The operator just needs to choose which one of the three ports to use for each direction.

The remaining ports have to be closed with taps (4 taps are supplied). With supporting feet (mod. B-52 / BA-52), ports “h” and “z” have to be closed with a tap.

DIMENSIONS Series 52M8P25A 52M8P32A 52M8P40A

ø 25 32 40

T1 13,5 17,5 15,5

T2 29,5 34,5 38,2

T3 13,5 17,5 20,5

T4 28,5 34,5 42,5

L2 8 9,5 11,5

L3 11 9,5 11,5

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

I G1/8 G1/8 G1/4

006

*DOC-serie 52 ING.qxd

6-04-2005

10:31

Pagina 10

52

S E R I E S

News 2005

A C T U A T O R S

Mod. 52M2C...

+ add the stroke K = cushion regulation screw The cylinder has two supply ports “I” for both endcovers.

The operator just needs to choose which one of the two ports to use on each end cover.

The remaining ports have to be closed with a tap (two taps are supplied).

DIMENSIONS Series 52M2C25A 52M2C32A 52M2C40A

ø 25 32 40

W 67,5 77,5 95

L 9,5 9,5 11,5

Series 52M2C25A 52M2C32A 52M2C40A

P M4 M5 M6

Z 4,5 7,5 7,5

Q 11 11 12

L1 135 155 190

I G1/8 G1/8 G1/4

B 25 25 25

G 5 5,5 7

N 19 19 23

E 84,6 99,6 112,6

øA H7 6 6 7

øX 4,5 5,5 6,5

R 60 69 82

C 35 45 50

F M5 M5 M5

F1 7 7 9

U 15 15 15

T 25 32,3 38,3

V 22 22 22

S 45 54 64

S1 49 58 68

TG 36 41 49

Q1 3 4 4

Mod. 52M8C...

Where no dimensions are presented, refer to dimensions of cylinder model 52M2C The cylinder has six supply ports “I” located on one endcover.

Three ports (x-h-w) to move the carriage in one direction and three (y-z-k) for the opposite direction.

The operator just needs to choose which one of the three ports to use for each direction.

The remaining ports have to be closed with taps (4 taps are supplied).

With supporting feet (mod. B-52 / BA-52), ports “h” and “z” have to be closed with a tap.

DIMENSIONS Series 52M8C25A 52M8C32A 52M8C40A

007

ø 25 32 40

T1 13,5 17,5 15,5

T2 29,5 34,5 38,2

T3 13,5 17,5 20,5

T4 28,5 34,5 42,5

L2 8 9,5 11,5

L3 11 9,5 11,5

I G1/8 G1/8 G1/4

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

*DOC-serie 52 ING.qxd

6-04-2005

10:32

Pagina 11

S E R I E S

News 2005

52

Mod. 52G2P...

A C T U A T O R S

+ add the stroke K = cushion regulation screw The cylinder has two supply ports “I” for both endcovers.

The operator just needs to choose which one of the two ports to use on each end cover.

The remaining ports have to be closed with a tap (two taps are supplied).

DIMENSIONS Series 52G2P25A 52G2P32A 52G2P40A

ø 25 32 40

W 100 120 150

E 159 191 246

L1 200 240 300

I G1/8 G1/8 G1/4

L 9,5 9,5 11,5

T 25 32,3 38,2

U 30 70 55

N 19 19 23

C 30 35 55

F M5 M5 M6

Series 52G2P25A 52G2P32A 52G2P40A

J1 9 -

TG 36 41 49

Z 4,5 7,5 7,5

S 45 54 64

R1 75 83,8 100

P M4 M5 M6

V 59 69 79

Q 11 11 12

Q1 3 4 4

øY2 4 4 6

Y0 4,4 4,4 6,4

+0,2

F1 8 11 12

D 10,4 10,4 10,4

B 50 50 80

A 12,5 16,9 10

øX H7 4 4 6

Y1 4,5 7 7

X1 5,5 8 8

Y3 0 4 4 6

-0,02

H 8,6 8,6 8,8 +0,05

C1 -0,05 40 40 40

G 6,4 6,4 6,4

M 4,3 4,3 4,3

S1 49 58 68

R 60 69 82

J M5 -

Mod. 52G8P...

Where no dimensions are presented, refer to dimensions of cylinder model 52M2C The cylinder has six supply ports “I” located on one endcover.

Three ports (x-h-w) to move the carriage in one direction and three (y-z-k) for the opposite direction.

The operator just needs to choose which one of the three ports to use for each direction.

The remaining ports have to be closed with taps (4 taps are supplied).

With supporting feet (mod. B-52 / BA-52), ports “h” and “z” have to be closed with a tap.

DIMENSIONS Series 52G8P25A 52G8P32A 52G8P40A

ø 25 32 40

T1 13,5 17,5 15,5

T2 29,5 34,5 38,2

T3 13,5 17,5 20,5

T4 28,5 34,5 42,5

L2 8 9,5 11,5

L3 11 9,5 11,5

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

I G1/8 G1/8 G1/4

008

*DOC-serie 52 ING.qxd

6-04-2005

10:32

Pagina 12

52

S E R I E S

News 2005

A C T U A T O R S

Mod. 52G2C...

+ add the stroke K = cushion regulation screw The cylinder has two supply ports “I” for both endcovers.

The operator just needs to choose which one of the two ports to use on each end cover.

The remaining ports have to be closed with a tap (two taps are supplied).

DIMENSIONS Series 52G2C25A 52G2C32A 52G2C40A

ø 25 32 40

W 67,5 77,5 95

E 94 106 136

L1 135 155 190

I G1/8 G1/8 G1/4

L 9,5 9,5 11,5

T 25 32,3 38,2

U 30 70 55

N 19 19 23

C 30 35 55

F M5 M5 M6

Series 52G2C25A 52G2C32A 52G2C40A

J1 9 -

TG 36 41 49

Z 4,5 7,5 7,5

S 45 54 64

R1 75 83,8 100

P M4 M5 M6

V 59 69 79

Q 11 11 12

Q1 3 4 4

øY2 4 4 6

Y0 4,4 4,4 6,4

+0,2

F1 8 11 12

D 10,4 10,4 10,4

B 50 50 80

A 12,5 16,9 10

øX H7 4 4 6

Y1 4,5 7 7

X1 5,5 8 8

Y3 0 4 4 6

-0,02

H 8,6 8,6 8,6 +0,05

C1 -0,05 40 40 40

G 6,4 6,4 6,4

M 4,3 4,3 4,3

S1 49 58 68

R 60 69 82

J M5 -

Mod. 52G8C...

Where no dimensions are presented, refer to dimensions of cylinder model 52G2C. The cylinder has six ports “I” located on one end cover which supplies both cylinder chambers. Three ports (x-h-w) to move the carriage in one direction and three (y-z-k) for the opposite direction.

The operator just needs to choose which one of the three ports to use for each direction.

The remaining ports have to be closed with taps (four taps are supplied).

With supporting feet (model B-52/BA-52), ports “h” and “z” have to be closed with a tap.

The guide is applied on the left side of the carriage (can be applied on the right side on request).

DIMENSIONS Series 52G8C25A 52G8C32A 52G8C40A

009

ø 25 32 40

T1 13,5 17,5 15,5

T2 29,5 34,5 38,2

T3 13,5 17,5 20,5

T4 28,5 34,5 42,5

L2 8 9,5 11,5

L3 11 9,5 11,5

I G1/8 G1/8 G1/4

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

*DOC-serie 52 ING.qxd

6-04-2005

10:32

Pagina 13

S E R I E S

News 2005

52

Mod. 52R2P...

A C T U A T O R S

ff = these holes are not present in cylinder 25 + add the stroke K = cushion regulation screw The cylinder has two supply ports “I” for both endcovers.

The operator just needs to choose which one of the two ports to use on each end cover.

The remaining ports have to be closed with a tap (two taps are supplied).

DIMENSIONS Series 52R2P25A 52R2P32A 52R2P40A

ø W E L1 I L T 25 100 160 200 G1/8 9,5 25 32 120 201 240 G1/8 9,5 32,3 40 150 252 300 G1/4 11,5 38,2

U 40 40 55

N 19 19 23

C F F1 40 M5 7,5 40 M6 9 55 M6 12

+0,2

TG Z S R1 P V Q Q1 øY2 Y øXH7 36 4,5 45 97 M4 68,2 11 3 4 4,4 4 0 41 5,5 54 108,8 M5 78 11 4 4 4,4 4 49 7,5 64 145 M6 90,5 12 4 6 6,4 6

Y1 7 7 7

-0,02

X1 Y3 8 4 0 8 4 8 6

+0,05

C1 -0,05 40 40 40

S1 R2 R 49 71 60 58 81,4 69 68 104,5 82

Mod. 52R8P...

Where no dimensions are presented, refer to dimensions of cylinder model 52R2P. The cylinder has six ports “I” located on one end cover which supplies both cylinder chambers.

Three ports (x-h-w) to move the carriage in one direction and three (y-z-k) for the opposite direction. The operator just needs to choose which one of the three ports to use for each direction.

The remaining ports have to be closed with taps (four taps are supplied).

With supporting feet (model B-52/BA-52), ports “h” and “z” have to be closed with a tap.

The guide is applied on the left side of the carriage (can be applied on the right side on request).

DIMENSIONS Series 52R8P25A 52R8P32A 52R8P40A

ø 25 32 40

T1 13,5 17,5 15,5

T2 29,5 34,5 38,2

T3 13,5 17,5 20,5

T4 28,5 34,5 42,5

L2 8 9,5 11,5

L3 11 9,5 11,5

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

I G1/8 G1/8 G1/4

010

*DOC-serie 52 ING.qxd

6-04-2005

10:32

Pagina 14

52

S E R I E S

News 2005

A C T U A T O R S

Mod. 52R2C...

+ add the stroke K = cushion regulation screw The cylinder has two supply ports “I” for both endcovers.

The operator just needs to choose which one of the two ports to use on each end cover.

The remaining port has to be closed with a tap (two taps are supplied).

DIMENSIONS Series 52R2C25A 52R2C32A 52R2C40A

ø W E L1 I L T 25 67,5 95 135 G1/8 9,5 25 32 77,5 115 155 G1/8 9,5 32,3 40 95 143,5 190 G1/4 11,5 38,2

U 40 40 55

N 19 19 23

C F F1 20 M5 7,5 40 M6 9 55 M6 12

TG Z S R1 36 4,5 45 97 41 5,5 54 108,8 49 7,5 64 145

+0,2

P V Q Q1 øY2 Y 0 øX H7 M4 68,2 11 3 4 4,4 4 M5 78 11 4 4 4,4 4 M6 90,5 12 4 6 6,4 6

Y1 7 7 7

X1 8 8 8

-0,02

Y3 0 4 4 6

+0,05

C1 -0,05 40 40 40

S1 R2 R 49 71 60 58 81,4 69 68 104,5 82

Mod. 52R8C...

Where no dimensions are presented, refer to dimensions of cylinder model 52R2C. The cylinder has six ports “I” located on one end cover which supplies both cylinder chambers. Three ports (x-h-w) to move the carriage in one direction and three (y-z-k) for the opposite direction. The operator just needs to choose which one of the three ports to use for each direction.

The remaining ports have to be closed with taps (four taps are supplied). With the use of foot bracket (model B-52/BA-52), ports “h” and “z” have to be closed with a tap. The guide is applied on the left side of the carriage (can be applied on the right side on request).

DIMENSIONS Series 52R8C25A 52R8C32A 52R8C40A

011

ø 25 32 40

T1 13,5 17,5 15,5

T2 29,5 34,5 38,2

T3 13,5 17,5 20,5

T4 28,5 34,5 42,5

L2 8 9,5 11,5

L3 11 9,5 11,5

I G1/8 G1/8 G1/4

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

*DOC-serie 52 ING.qxd

6-04-2005

10:32

Pagina 15

S E R I E S

News 2005

52

Foot mount Mod. B-52...

The following is supplied: N° 2 feet N° 4 screws

A C T U A T O R S

DIMENSIONS Series

ø

A1

B-52-25 B-52-32 B-52-40

25 32 40

5 7,5 7,5

A2 A2 (Series 52...P...) (Series 52...C...)

210 145 255 170 315 205

A3

A4

A5

øA6

A7

A8

A9

5 7,5 7,5

4,5 7,5 7,5

5,5 8,5 8,5

5,5 7 9

36 41 49

45 51 64

22 25 25

Foot mount (high) Mod. BA-52...

These are to be used in conjunction with intermediate bracket (Mod. BH-52... and BL-52...)

The following is supplied: N° 2 feet N° 4 screws

DIMENSIONS Series

ø

A1

BA-52-25 BA-52-32 BA-52-40

25 32 40

5 7,5 7,5

A2 A2 (Series 52...P...) (Series 52...C...)

210 145 255 170 315 205

A3

A4

A5

øA6

A7

A8

A9

5 7,5 7,5

5,5 16,5 8,5

12,5 17,5 17,5

5,5 7 9

36 41 49

45 51 64

22 25 25

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

012

*DOC-serie 52 ING.qxd

6-04-2005

10:32

Pagina 16

52

S E R I E S

News 2005

A C T U A T O R S

Intermediate brackets Mod. BH-52... and BL-52-32

The following is supplied: screws for fixing the intermediate brackets to the tube profile.

The cylinder can safely be mounted by using two intermediate brackets without using the feet bracket.

The intermediate brackets BH-52-25 and BH-52-40 can be mounted either on sides X or Y or Z of the tube profile.

The intermediate support model BH-52-32 can be mounted on side Z of the tube profile (if the application requires the assembling of an intermediate bracket on sides X-Y, it is necessary to mount the intermediate bracket model BL-52-32).

DIMENSIONS Series BH-52-25 BH-52-32 BH-52-40

013

ø 25 32 40

B1 70 85 105

B2 8 10 10

B3 18,5 18,5 18,5

B4 35 40 40

B5 60 73 90,5

Ă˜B6 5,5 6,6 9

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

*DOC-serie 52 ING.qxd

6-04-2005

10:32

Pagina 17

S E R I E S

News 2005

52

Self-compensating adaptor Mod. CF-52...

A C T U A T O R S

This self-compensating adaptor has been designed to be used with external guides (supplied by the customer).

It is used to compensate the difference in alignment between the rodless cylinder and the external guide system.

Suitable for cylinders mod. 52M2P/52M2C/52M8P/52M8C. DIMENSIONS Series CF-52-25-32 CF-52-25-32 CF-52-40

ø 25 32 40

A 74 81,9 94,5

X 1 0,5 0,5

E° ±8 ±6 ±6

B 12 12 12

Y 0,8 0,8 0,8

The company reserves the right to vary models and dimensions without notice.

These products are designed for industrial applications and are not suitable for sale to the general public.

014