Endurawall
Corrugated Sidewall Conveyor Belting
Corrugated sidewall conveyor belting has long been established as the industry standard for high angle bulk material conveying. Endurawall corrugated sidewall belting is specifically designed to meet the needs of this highly technical industry segment. Our quality manufacturing process, and outstanding performance features combined with our technical expertise make Endurawall the ideal solution for both new installations and existing belt replacements.
Sidewalls
Type
H mm
Bw mm
Tw mm
p mm
Min pulley Ø mm D1
Min pulley Ø mm D2
WeigHT kg/m
S S S S S HDS HDS HDS HDS HDS HDS XHDS XHDS
40 60 80 100 120 120 160 200 250 280 300 300 400
35 50 50 50 50 75 75 75 75 75 75 100 100
30 45 45 45 45 70 70 70 70 70 70 90 90
30 40 40 40 40 60 60 60 60 60 60 75 75
125 160 200 250 315 315 400 500 630 800 800 800 1000
200 250 350 400 500 500 630 800 1000 1200 1200 1200 1600
0.60 1.56 1.80 2.23 2.67 4.01 4.77 6.48 7.55 8.60 9.30 12.50 18.75
All sidewalls are available with or without fabric reinforcement except XHDS which is always fabric reinforced.
Made to strict International standards and subjected to rigorous testing procedures.
Side Blinkers Available as an option, side blinkers are placed between the wall and cleat. This installation will minimize the amount of material catching in between the corrugations and the cleat, therefore reducing carryback and spillage. Particulary useful in applications where the material is small and free-flowing.
installation Hardware All required installation hardware is provided with the belt including fasteners, washers and sidewall support fittings.
Hot Bonding process Protect Your Investment! Our hot bonding process allows us to hot vulcanize both the cleats and sidewalls to the base belt, extending belt life in almost every application. Advantages: • H ot bonding dramatically increases the adhesion of the sidewalls & cleats to the base belt, resisting separation & delamination over time. • H ot bonding prevents sidewall & cleat separation in applications with elevated belt temperatures, where cold cure products often fail due to cement reversion. • Hot bonding prevents bond failure due to extreme cold.
Cleats Type-T
Type-MBT
Type-Tk
Type-TXS
HeigHT mm
BASe WiDTH mm
Min pulley Ø mm D1
TypiCAl SiDeWAll
Type-T 20 25 35 40 55 75 90 110 140 180 230
One pieCe T-CleAT 40 0.28 40 0.30 55 0.55 70 0.60 80 1.45 80 1.80 110 2.50 110 2.80 160 6.60 160 8.30 175 10.46
75 75 100 125 125 150 250 315 400 500 630
S-40 S-40 S-40 S-60 S-60 S-80 S-100 S-120 HDS-160 HDS-200 HDS-250
Type-MBT* 110 140 180 230 250 280 360
TWO pieCe T-CleAT 160 7.90 160 9.25 160 11.50 160 13.50 160 14.60 160 17.65 160 19.25
315 400 500 630 630 800 1000
HDS-120 HDS-160 HDS-200 HDS-250 HDS-280 HDS-300 XHDS-400
Type-TXS* 230 250 280 360
TWO pieCe eXTRA HeAVy T-CleAT 210 17.85 630 220 18.60 630 230 19.50 800 230 22.50 1000
HDS-250 HDS-280 XHDS-300 XHDS-400
Type-Tk 35 40
DRAg OuT CleAT 110 1.65 110 1.80
S-40 S-60
WeigHT kg/m
100 100
Type-C
Type-TC
Type-MBTC
Type-TCXS
HeigHT mm
BASe WiDTH mm
Min pulley Ø mm D1
TypiCAl SiDeWAll
Type-C 35 55 75 90 110
One pieCe SCOOp CleAT 55 0.50 75 1.50 80 2.00 110 2.30 110 2.50
100 125 150 275 275
S-40 S-60 S-80 S-100 S-120
Type-TC 75 90 110 140 180 230
One pieCe BuCKeT CleAT 80 1.80 110 2.50 110 2.80 160 6.60 160 8.30 175 10.46
150 275 275 350 350 450
S-80 S-100 S-120 HDS-160 HDS-200 HDS-250
Type-MBTC* 110 140 180 230 250 280 360
TWO pieCe BuCKeT CleAT 160 7.90 160 9.25 160 11.50 160 13.50 160 14.60 160 17.65 160 19.25
315 400 500 630 630 800 1000
HDS-120 HDS-160 HDS-200 HDS-250 HDS-280 HDS-300 XHDS-400
Type-TCXS* 230 250 280 360
TWO pieCe eXTRA HeAVy BuCKeT CleAT 225 17.95 630 225 18.90 630 225 22.50 800 225 26.00 1000
WeigHT kg/m
HDS-250 HDS-280 XHDS-350 XHDS-400
The above are standard heights, non-standard are available, please enquire. * urethane cleat uprights available as an option.
Base Belts
Type Xe
Type Xe-ep
Used primarily in light to medium duty applications, the cross-stabilization is incorporated into the tensioning ply.
Used in medium to heavy applications, the cross-stabilization ply is separate from the tensioning plies. In the example shown the belt has 2 crossstabilising plies.
Type Xe-SC
Type XST-SC
Used where transverse rigidity is critical, this belt incorporates textile tensioning plies with steel cable crossstabilizing layers.
Used on high vertical lift applications, this belt combines steel cable tensioning with steel cable crossstabilizing members.
Cover Grades
ArmorEdge
Base belts, sidewalls & cleats can be manufactured using a rubber grade specific to your application requirements. These cover grades include (but are not limited to) high abrasion resistant, oil resistant, flame resistant (MSHA, CSA-C, etc.), heat resistant, and chemical resistant. Our technical staff will assist you in selecting the correct grade to suit your needs.
ArmorEdge is a fabric breaker that wraps around the outer edges of the belt. It is designed to provide extra protection against damage and ply delamination caused by belt tracking issues.
Questionnaire Customer Name: Address: Phone: Email:
Date: Conveyor Ref. Number: New Construction: Replacement Belt:
Configuration: (circle one)
. A: D:
B: E:
:Material Type: Lump Size (min.): Angle of Surcharge: Ambient Temperature: Presence of Oil:
yES
NO
C: F: Material Density: Lump Size (max.): Capacity Requirement: Material Temperature: Presence of Moisture:
Belt Style: Bottom Cover Thickness:
Top Cover Thickness: Rubber Grade:
Pulley Diameter (D1): Belt Speed: Belt Width (Bw): Sidewall Width (W): Sidewall Height (H): Cleat Pitch (P):
Pulley Diameter (D2): Belt Length: Sidewall Inset (I): Pocket Width (Bp): Cleat Height: Cleat Style:
/Additional Information: . . . ю ю ю n / /
.
Contact information: 345 Marwood Drive, Oshawa Ontario Canada L1H 7P8
Tel: (905) 443-0150 www.afmindustries.com
Fax: (905) 443-0155 email: info@afmindustries.com