Fibre • Audio • Video • Power • Comms
BROADCAST
SOLUTIONS 2019 canford.co.uk
VIDEO PATCHING
48-4508
CANFORD 12G 4K microMUSA NEW 12G 4K “MICROMUSA” RANGE OF PATCH PANELS, U-LINKS AND PATCHCORDS
“ Smaller, lighter & 12G performance”
In response to the increasing demand for 4K infrastructure products Canford have developed this exclusive range of video patch panels which are intended for 12G 4K ultra high definition (2160P60), 3G and 1.5G high definition, standard definition and analogue video applications. The performance exceeds the requirements of SMPTE ST 2082-1 making them suitable for composite and component video, 270 Mb/s SDI, uncompressed 1080i or 1080p HD-SDI video and 4K UHD (2160P60) video up to 12GHz. These video jackfields incorporate the new microMUSA panel connector which, designed and manufactured for Canford by Coax Connectors, not only perform beyond the required 4K standard but also offer the highest possible density with a maximum of 2 rows of 48 connectors in a 1U panel. Additionally, all connectors incorporate a unique positive location feature (“detent”) that allows you to feel when the U-link or patchchord is fully mated on the panel whilst additionally providing resistance to disconnection through vibration as found in some environments such as OB vehicles. Though designed and made to the same very high standards as our industry standard 3G MUSA connectors this range is not compatible with the existing Canford 3G MUSA range. Like the original 3G MUSA system, the microMUSA is a non-normalised system and therefore U-links or patchcords are required to make the circuit. Rear connection is via staggered standard BNC socket on the 24 and 32 way variants and Micro BNC sockets on the 48 way versions. Connector configuration is two rows in 1U. The body parts are nickel-plated and centre contacts are gold plated giving a smooth mating action. AVAILABLE NOW Exclusively from Canford, for more information contact our sales team
TERMINATION PANELS NEW CANFORD BNC 12G, 4K UHD, 75 OHMS TERMINATION PANELS These “Ultra High Definition” flat, angled and very high density BNC termination panels are intended for 12G 4K ultra high definition (2160P60), 3G and 1.5G high definition, standard definition and analogue video applications. The performance exceeds the requirements of SMPTE ST 2082-1 making them suitable for composite and component video, 270 Mb/s SDI, uncompressed 1080i or 1080p HD-SDI video and 4K UHD (2160P60) video up to 12GHz. Mating COAX 4K cable connectors and patchcords are available.
48-4753
COAX 12G KORUS SERIES COAX CONNECTORS BNC CONNECTORS These high-performance, 75 ohm types have been developed specifically for 4K UHDTV applications. They have extremely low return-loss and are rated to 1000 mating cycles. The impedance-matched, gold-plated, crimp centrepin ‘clicks’ home into a PTFE insulator in a black nickel plated body with crimp outer sleeve (‘ferrule’).
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
CUSTOM SOLUTIONS FROM CANFORD CUSTOM METALWORK CANFORD CUSTOM RACK PANELS Utilising in-house machining centres, we are able to offer a very fast turnaround custom panel service. Applications include studio wallbox access points, vehicle tailboards, multi-format post production suites, multimedia-rack patching or presentation-suite feeds where non-standard connector combinations are required. Manufactured from rigid aluminium extrusions, panels can be delivered pre-fitted with almost any bulkhead-mounting audio, video or data connector-combination. Cranked lacing-bars giving easy access to the rear of the connectors can be individually specified. Designation-strip holders with snap-on covers, offering up to 7.5mm of printable height, may be fitted as required. Templates for printing designation strip labels, available as a DWG file for AutoCAD and compatible applications, can be downloaded from the appropriate product page on the Canford website.
ENGRAVING BY CANFORD Equipped with both CO2 and fibre technology the Canford in-house, state of the art, laser engraving machine can mark or engrave a wide range of materials and finishes including anodised aluminium, stainless steel, powder coated steel/ aluminium, plastics, laminates and wood. The process is not limited to simple text, but can also incorporate intricate company logos and other graphics. With a working area of 1000mm x 610mm the machine is able to accommodate most requirements and is ideal for permanent labelling of all types of panels and plates, be they Canford standard products or custom designs. Coloured infilling is an option where suitable. Ideally suited to single colour applications where the volumes are relatively small or there is variation in the print from plate to plate.
CANFORD WALLBOX CONNECTION PLATES Steel connector mounting plates are available to fit metal wallboxes used in sports stadia, arena, theatres, swimming pools, theme parks, race courses and other venues where a broadcast or communications cable infrastructure is installed. Panels are specially made to order and are usually supplied with customised threaded mounting posts and/or bolts for attachment to the wallbox or cabinet. Virtually any combination of connectors; audio, video, data, power and communications can be accommodated and the Canford design office will assist with the detailed layout design, markings and lacing bar specification. Panels may be fitted with designation strips, or engraved. Standard colours are dawn grey, dark grey, black or white, other colours are available subject to minimum order quantity. Larger panels are also available, for applications including OB vehicle AC mains power termination, power cabinets and control, metering and switchgear cabinets. Panels may be supplied unpopulated, pre-fitted with connectors, or as a kit with loose connectors and mounting hardware. Cable assemblies such as triax and SMPTE 304M/311M hybrid fibre are also available. A wide range of metal or plastic wallboxes, offering varying levels of ruggedness and environmental protection, are also available.
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| canford.co.uk
CANFORD CUSTOM SCREEN PRINTING SERVICE Using our significant experience of the silk screen printing process Canford is able to offer this service to customers who are looking to uniquely identify, promote or label their product. From helping to develop the initial artworks to producing the final film and mesh frame we can work with the client to ensure the end result meets their specification and delivers a high quality print. Typical applications include the branding of rack blanks with a company logo, service details and contact information. Once fitted into a rack, this provides both useful information to the end user and additional, cost-effective marketing for the installer. The custom screen-printing service is ideally suited to single or multiple colour applications where the volumes are higher (20+) and the print remains the same across the entire batch.
CONNECTION PANELS AND STAGEBOXES MULTI-PURPOSE TERMINATION PANELS - UNIVERSAL CANFORD 1U UNIVERSAL KEYSTONE PANELS ‘Total flexible solution’ 1U, 19”, 24 way keystone panel available in Grey or Black. Interchangeable keystone modules available in CAT6, CAT6A, CAT5E, SC Fibre, LC Fibre, ST Fibre, HDMI, USB2, USB3, RJ11 / 12, BNC 50Ohm, 75Ohm & HD, F Type, 3.5mm Jack also Feedthrough modules available in CAT6, CAT6A & CAT5E, panels also available in 8 & 16 way.
44-3791
ADAPTORS - ‘D’ cut out / Keystone ‘D’ cut out / keystone adaptor gives the ability to use keystone modules with ‘Canford Universal’ ‘D’ cut out panels available in 1U - 8way, 12way, 16way, 2U - 32way and 3U - 48 way, three colour - Grey, Dark Grey & Black. 40-299 CANFORD XLR BLANKING PLATE D-series, tapped mounting holes 45-3391
NEW CANFORD UNIVERSAL CONNECTION PANELS - Rapid Assembly Multipurpose 1U panels developed to allow rapid rear mounting of connector configurations without the need for specialist tools or fiddly nuts. These panels are designed and manufactured from 2mm steel and include only a single return at the top so that they can accommodate the provided Neutrik MFD M3 tapped mounting frame which effectively snaps onto the rear of any Neutrik D-Series or Canford Universal Series connector and allows the connectors to be quickly mounted using the supplied M3 countersunk screws. These panels are also suitable for rear mounting Neutrik Speakon and Powercon D-series connectors 45-3331
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
DATA AND COMMUNICATIONS PATCH AND CONNECTION PANELS CANFORD CAT5E, CAT6 AND CAT6A RJ45 FEEDTHROUGH PRO PATCH PANELS
45-3428
Unscreened - Supplied fully populated with feed-through (also known as double-sided or back-to-back) unscreened RJ45 CAT5E sockets enabling system patching and easy connection of portable or external equipment. A printable designation-strip with snap on cover and a lacing bar are fitted as standard. Feedthrough modules available in CAT6, CAT6A & CAT5E, panels also available in 8 & 16 way.
45-3425
Screened - Supplied fully populated with feed-through (also known as double-sided or back-to-back) screened RJ45 CAT6A sockets enabling system patching and easy connection of portable or external equipment. A printable designation-strip with snap-on cover and a lacing-bar are fitted as standard.
CANFORD UNIVERSAL MODULAR CONNECTION PANELS
45-3913
Multipurpose modular connection panels with an almost infinite number of configurations. These are a development from the long-established Canford ‘Universal Connection System’, to accommodate connectors that are too large for the original system. They allow the user to mount virtually any combination of audio, video, data and power connectors in a 2U rack panel without costly custom metalwork.
45-3900
FLOOR AND WALL, BOXES AND PLATES CANFORD STAGEBOXES - Modular, steel A series of rugged steel stageboxes offering a vast range of connection possibilities when fitted with ‘Universal’ series connectors on the top plate and popular multicore connectors on the ends. A robust, folded chassis forms the basis for the box, with a choice of top plates with up to 48 ‘Universal’ cutouts. Top plate ‘Universal’ connector holes are numbered sequentially (e.g. 1-12, 1-16 etc). End-plates are available with mounting apertures for EDAC, Contact, MIL26 or Tourline multipin connectors. They have a folded flange which protects the connectors and can be assembled facing in or out, when they form handles. Supplied with necessary hardware to assemble box, including plastic feet.
CANFORD WALLBOXES - Surface mounting, modular A series of rugged steel wallboxes offering a vast range of connection possibilities when combined with ‘Universal’ series connectors. A robust, folded chassis forms the basis for the box with a choice of front plates with up to 48 ‘Universal’ cutouts. Front plate ‘Universal’ connector holes are numbered sequentially (e.g. 1-12, 1-16 etc). The back chassis is supplied with a selection of mounting holes and cable access holes in the rear face. Supplied with necessary hardware to assemble box. Finished in Black.
PROTOTYPE CANFORD HINGED SWING FRAME Following feedback from our touring customers we’ve developed a 19’’ swing frame available in 6U-18U that can be retrofitted into a standard 19’’ flight case or rack. It has hinges on one side and slam locks on the other. This allows for easy access to the rear of the panels and cables which is especially beneficial when the access to the rear of the rack or flightcase is restricted. For further details please contact Sales. International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| canford.co.uk
FIBRE SOLUTIONS FROM CANFORD FIBRE INTERFACES & CONNECTION HARDWARE CANFORD ANGLED 12 WAY OPTICALCON DUO SMPTE FIELD TERMINATION BOX These 1U rack enclosures will be manufactured to accept either 8 or 12 opticalCON connectors and are designed to facilitate easy on site termination. The range will be fitted with Neutrik NO2-4DW-1A SMPTE DUO connectors and blue singlemode flanges. The electrical contacts on the connectors will be terminated to 6 pin Mate-N-Lok male panel connectors which in turn terminates to a the female bulkhead connector fitted within the enclosure. A 24 way splice tray and 2 cable management spools are also provided within the case. During installation the SMPTE 311M cable is brought into the enclosure and the electrical conductors are fitted with the supplied crimp contacts before being inserted into the female Mate-NLok bulkhead connector. The fibre cores are routed via the cable management spools to the splice tray and spliced to the provided LC patch cords before connecting to the rear of the DUO connector. The enclosure will come supplied with all of the required components to facilitate easy installation.
CANFORD FIBRE FIELD TERMINATION RACKMOUNT CASE Designed to facilitate a fast, easy and effective solution for installing hybrid fibre connectors on site and eliminates the need for pre-terminated cable assemblies. The boxes come complete with up to 8 x Lemo 3K.93C EDW 50-2168 or FMW cable assemblies pre-fitted in either a flat or angled 2U front panel. The SMPTE cable enters the chassis via rear cable glands and the strain relief is secured to the clamping post. The electrical cables are then terminated directly to the AMP connector provided on the internal bulkhead. The fibre cables terminate directly to the SC coupler on the same bulkhead using SENKO XP Fit Plus connectors or alternatively via SC tails which are spliced to the incoming fibre using the internal splice tray. This system not only provides improved protection to both the electrical and fibre connections which are secured within the case but also allows for quick and easy replacement/repair of any failed SMPTE connectors.
NEW CANFORD ANGLED UNIVERSAL PANEL Based on the same design as the opticalCON Field Termination Box these panels are supplied in 8 and 12 way and incorporate a simple cable management plate at the rear. They are suitable for use with any D series/Universal series connector and suited to applications where it is beneficial to relieve the stress on the mating cable.
NEW CANFORD FIBRE SMPTE 311 SPLICE ENCLOSURE
50-2344
These wall/ceiling mountable enclosures will be manufactured to accept up to 8 incoming SMPTE 311M cables and are designed to enable the respective fibre and electrical core to be broken out to LC, SC or ST bulkheads and 6 pin Mate-N-Lok panel connectors. Similar to our range of rack mountable field termination boxes they offer not only the possibility of a “plug and play� approach but also simplify the process of on-site installation and maintenance. They are particularly useful in installations where depth is an issue as the SMPTE cable can be brought away from the rear of the panel then terminated elsewhere in a safe and secure manner. The enclosures are also provided with a shroud to offer additional protection against accidental damage to the breakout connections. The enclosures come supplied with the required fibre patch cords, electrical crimp contacts and splice protector sleeves to help facilitate easy installation. Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
CANFORD OPTICALCON BREAKOUT BOXES Where multi-way fibre cables fitted with Neutrik opticalCON Dual or opticalCON Quad connectors are used to provide a point-to-point link, these break-out boxes split the two or four channels to a variety of other formats including; Duplex LC, SC and ST connectors, depending on the model. The connectors are mounted in a rugged, extruded enclosure, suitable for use in broadcasting and live-event environments. Both multi-mode and single-mode types are offered. These designs are assembled to order, in short time scales, using stocked modules. Alternative configurations such as mixed LC, SC and ST connections can also be accommodated.
50-0302 50-0316
CANFORD LEMO BREAKOUT BOXES We have extended our range of Optical breakout boxes to include LEMO SMPTE connectors. Our new breakout boxes allows the LEMO SMPTE connectors to be broken out into either SC, LC, ST, opticalCON Duo or opticalCON Quad connectors giving the customer the flexibility to mix different formats together.
50-0371
NEW CANFORD HMA BREAKOUT BOXES Adding to our range further we now offer HMA connectors. Our new breakout boxes allows the 2ch or 4ch HMA connectors to be broken out into either opticalCON Duo, opticalCON Quad, HMA 4ch to 2ch or SC, LC, ST connectors giving the customer the flexibility to mix and convert different formats together.
SMPTE FIBRE CABLE SMPTE PRE-TERMINATED CABLES Canford now offers a variety of SMPTE fibre cables including Furukawa, Draka, Belden OCC and Percon that are kept in stock to ensure quick turn-around times on the cable assemblies. Cables can be terminated to customers’ specification using LEMO connectors as well as LCs, SCs and STs. Preterminated cables can be used in conjunction with the Canford Hybrid Fibre Field Termination Box.
FIBRE TERMINATION & READY-MADE CABLING NEW FIBRECO EXPANDED BEAM CONNECTOR TERMINATION • Withstands harsh environments, such as Touring and Festivals • Reliable with reduced sensitivity to dust and dirt contaminants • Time saving hermaphroditic mating • Simple, on-site cleaning • Singlemode and Multimode versions • Custom cable assemblies available – contact our sales team for more information
COMING SOON CANARE SMPTE CONNECTOR TERMINATION Canford Termination of Canare SMPTE connectors and on display will be Canare SMPTE Cables and connectors along with test Equipment for field and workshop use. International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| canford.co.uk
CANFORD SMPTE311M HYBRID FIBRE CAMERA CABLE BREAKOUT ASSEMBLIES WITH LEMO PANEL TYPE CONNECTORS These industry standard, hybrid fibre, HD camera cable breakout assemblies use Lemo SMPTE304 connectors and are offered in a variety of versions. The Lemo 3K.93C stainless steel connectors incorporate the highly-reliable Lemo push-pull latching system and are suitable for up to 20,000 mating cycles.
50-1122
50-1112
SENKO XP FIT PLUS TERMINATION KIT with Precision Flat Cleaver The installation kit contains everything needed for installation of SC and LC XP Fit Plus connectors. No epoxy, polishing film or other consumables are required. No need for electrical power to complete terminations.
50-1526
NEW SENKO SMART PROBE 2
50-1531
Smart Probe 2 records and archives results to aid the analysis and traceability of fibre connectivity issues. The wireless device comes with the unique VUE3 app featuring pass/fail analytical software and a flexible data archiving tool that enables the operator to upload results of fibre inspections in as much detail as required.
SENKO XP FIT PLUS FIBRE CONNECTORS Field Terminated
50-1525 SENKO ASSEMBLY JIG
The Senko XP Fit plus connectors are pre-polished, pre-assembled, LC, SC and ST fibre connectors available in both multimode and singlemode versions. They are designed for field-termination without the need of adhesives or polishing.
50-1521 SENKO XP FIT PLUS FIBRE CONNECTOR
CABLE CANFORD READY-MADE CABLES RAPID-RESPONSE CELL FOR CABLE PRODUCTION Canford has made significant investments within its manufacturing facility in order to cope with a growing demand for bespoke cables, as well as other own brand manufactured products. The Rapid-Response Cell for cable production was developed to allow both custom and standard cable assemblies to be quickly produced, reducing customer waiting times. Depending on cable type, cable assemblies can now be produced, packed and ready for same day despatch*
46-9310 46-9100
38-8161
*Same day despatch when you order before 12pm. Subject to stock holding of non-standard cables and connectors. Appropriate lead time required for large project orders. A standard £8.00 delivery charge will be applied to all orders below £100.00, otherwise carriage is free.
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
CANFORD - RANGE EXTENDING ACTIVE OPTICAL HDMI Active optical HDMI cables are intended for applications where longer cable-run lengths than those obtainable with standard copper HDMI cables are required. They are also useful where the cable needs to pass through environments with high electrical interference. They offer a considerably more elegant and cost-effective solution for long cable runs than CAT5E cable with converter box systems. Applications include professional AV systems interconnection and indoor and outdoor digital signage and kiosks, plus home theatre systems in larger properties. 38-8681
NEW CANFORD ACTIVE OPTICAL CABLES - HDMI 2.0 Terminated with micro HDMI type D connectors and supplied with adapters to fit full-size, type A, HDMI connectors. A USB to DC power cable and a cable pulling tool are also included. Intended to aid fixed installation; the micro HDMI connectors reduces the likelihood of snagging as the cable is pulled through conduit, fed through voids or behind plaster board. Other benefits may include applications where cables must pass through congested and/or small apertures, such as internally wired brackets and mounts. These CPR certified cables are available in a range of lengths from 10 to 100 metres. They handle 18Gbps and 4K at 60Hz, with 48-bit colour-depth and 3D capabilities. Audio can be transmitted at 8-channel PCM, Dolby Digital True HD, or DTSHD Master Audio.
NEW CANFORD ACTIVE OPTICAL CABLES - HDMI 2.0 - Armoured - Deployable
38-8701
Designed for rental and stage use, these cables are 5.8mm in diameter with a TPU (thermoplastic polyurethane) jacket. Under the jacket, a layer of Kevlar surrounds a flexible, stainless-steel conduit that protects the core of the cable against rodents and provides crush resistance up to 200kg. Additional Kevlar is placed between wires within the conduit for added strength. Good flexibility is maintained with a bend radius of 45mm. All lengths are terminated with HDMI type A connectors. No external power is required. Cables are available in a range of lengths from 10 to 100 metres. They support 18Gbps and 4K at 60Hz, with 48-bit colourdepth and 3D capabilities. Audio can be transmitted at 8-channel PCM, Dolby Digital True HD, or DTS-HD Master Audio.
DATA & ETHERNET NEW CANFORD CAT7-F CAT 7 DATA CABLE Stranded conductor, screened - Deployable, ruggedised
31-840
Increasing use of network and data cables between audio and video devices on location calls for a Category 7 cable that is designed specifically for deployable use. Basic Category 7 cable is a relatively inflexible installation cable, and even the slightly more flexible patchcord type still has very poor handling characteristics in deployed (as opposed to patching) applications. This Category 7 cable has been designed specifically for the professional audio and video user, and is intended to handle like a typical microphone cable. It has recently been approved by Waves Audio for use with their Waves Audio Soundgrid systems. It has an extra-flexible individually screened 4 pair core structure with an overall braid screen that maintains Category 7 performance, then a rugged polyurethane outer jacket, to give superb flexibility and handling characteristics. Suitable for use with both standard RJ45 connectors (round entry version), the Neutrik Ethercon and most other ruggedised RJ45 designs, or any other connector with a suitably sized entry gland. The cable is also suitable for DMX512 applications.
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| canford.co.uk
CANFORD CAT5E-F-J CATEGORY 5E DATA CABLE Stranded conductor, screened Multi-circuit deployable Cat5E cables, for both studio and touring/OB applications, based on Canford’s CAT5E-F screened flexible cable. The heavy duty version (formerly called ‘touring’) uses the standard CAT5E-F 6.2mm diameter flexible cable, with colour coded and numbered individual jackets. The overall jacket has a tough layer of PUR (polyurethane) for abrasion resistance. Canford uses PUR on many cable designs to provide excellent wearing characteristics in the harsher environment of outside broadcast and touring applications The flexible version (formerly called ‘studio’) has a design optimised to give the best possible flexibility, and uses the CAT5E-F-M 5.8mm diameter cable, with colour coded and numbered individual jackets. The overall jacket is soft PVC for optimum flexibility.
31-884
31-888
31-894
CANFORD CATKIT ETHERCON STAGEBOX SYSTEM This range of robust stage boxes, patch boxes and super-flexible, rugged, multicore cables is designed to withstand the rigours of life on the road. Available in four-way or eight-way configurations with standard RJ45-compatible etherCON connectors, they offer a solution to deploying multiple Cat5E equivalent cables in demanding environments, including television outside broadcast and live-performance rigs. Stage boxes are fitted with captive multicore cables in various lengths, with etherCON break-out tails, Multicore cables have etherCON break-out tails at each end, patch boxes provide back-to back etherCON connectivity and breakout to standard RJ45 Cat5E patchcords.
38-8170
CANFORD CAT5E-F CATEGORY 5E DATA CABLE Stranded conductor, screened - Deployable
31-850
Increasing use of network and data cables between audio and video devices on location calls for a Category 5E cable that is designed specifically for deployable use. Basic Category 5E F/UTP is a relatively inflexible installation cable, and even the slightly more flexible patchcord type still has very poor handling characteristics. This Category 5E cable has been designed specifically for the professional audio and video user, and is intended to handle like a typical microphone cable.
CANFORD CAT5E-F-M CATEGORY 5E DATA CABLE Stranded conductor - Miniature, Flexible A reduced size version of Canford CAT5E-F, designed specifically for installations where a very flexible screened Category 5E cable is required.
CANFORD CAT5E-R CAT 5E DATA CABLE Stranded conductor, screened - Deployable, ruggedised
31-860
31-948
This specialist version of Cat5E SF/UTP (foil and braid screen) has a very tough polyurethane outer jacket, and has moderate flexibility. The jacket is two-layer, the inner layer is low fire hazard material, so the cable can be classed as ‘low fire hazard’.
CANFORD CAT 6 F DEPLOYABLE DATA STRANDED CONDUCTOR UTP CABLE
31-870
Increasing use of network and data cables between audio and video devices on location calls for a Category 6 cable that is designed specifically for deployable use. Basic Category 6 UTP is a relatively inflexible installation cable, and even the slightly more flexible patchcord type still has very poor handling characteristics in deployed applications. Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
DRAKA CAT6 SHIELDED Solid Conductor DRAKA Category 6 U/FTP 4 twisted pair solid conductor cable, patented foil wrapping of two pairs 1 & 2, 3 & 4, Low Fire Hazard jacket (LSHF). Also available as a Category 6 S/FTP 4 twisted pair solid conductor cable, patented foil wrapping of two pairs 1 & 2, 3 & 4, with overall Braid, Low Fire Hazard jacket (LSHF).
31-936 U/FTP, LFH Jacket (Blue)
31-928 S/FTP, LFH Jacket (Blue)
VIDEO CABLES NEW CANFORD SDV-UHD-LFH 12G 4K Cable If you need your 12G signal to go further, without up-sizing the cable diameter, this new cable gives you that extra distance.
36-696
NEW CANFORD SDV-XF Cable Joining our highly successful SDV-F flexible video coax, we are adding an extra-flexible version with a double braid screen - SDV-XF. Contact our sales team for more information
36-540
CANFORD SDV-L-X-LFH - HDTV and Serial Digital Video Cable (1.0/4.8) Low Loss, Extended Performance - Low Fire Hazard Extended performance low-loss coaxial 75 ohm cable specifically for 3GHz HDTV and serial digital video signals, with low-smoke, zero-halogen material outer jacket. 36-637
CANFORD SDV-F-HD - HDTV, Serial Digital and Analogue Video Cable (1.2L/4.8Dz) - Flexible, Heavy Duty A cable designed specifically for deployable applications where HDTV or SDI signals are to be carried. The construction is optimised for extremely high flexibility, and the polyurethane jacket provides resistance to abrasion and durability. This is the HDTV cable that handles like the softest of microphone cables.
36-587
AUDIO CABLES CANFORD FST Foil Screened Stranded Conductor Twin Cable Standard, Low Fire Hazard and Flexible type - This D’n’A series (Digital and Analogue) cable is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be suitable for AES/EBU digital audio as well as analogue microphone and line level signals. Wire insulation is polypropylene, which shrinks back minimally during soldering (considerably less than PVC or polyethylene).
31-001 FST 31-280 FST-F 31-059 FST-LFH
Standard -The overall PVC jacket is bonded to the screen tape on application so that one stripping action removes jacket and screen, leaving the signal wires and earth wire free for further processing. It is not necessary to have to unwind tape screen after jacket stripping nor is it necessary to become involved in the unravelling of braided copper screens. FST-LFH Low Fire Hazard - FST-LFH is technically identical to standard FST, except that the PVC jacket is replaced by an LFH material. Wiring specifications for many public buildings now call for LFH cables to be used in certain areas, notably in corridors etc. Under combustion circumstances, LFH cables have a significantly reduced smoke emission, and the gaseous products contain no toxic halogens.
FST-F Flexible -This cable is constructed in a similar way to the easy-strip FST, but has changes to improve the flexibility. The insulation has a slightly reduced wall thickness, and a significantly longer lay length of the twist than FST, giving a single, long length strip. The overall jacket is a soft PVC with semi-matt finish, and overall diameter is slightly less the FST. International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| canford.co.uk
CANFORD FST-DMX-LFH Foil Screened Stranded Conductor Twin Cable - For DMX512 Data - Low Fire Hazard Foil screened, 120 ohm installation cable, specifically for DMX512 lighting-control applications, designed to meet RS485 data cable specification. Available in one and two pair versions. Wire insulation is polypropylene which shrinks back minimally during soldering (considerably less than PVC or polyethylene). The overall jacket is bonded to the screen tape so that one stripping action removes jacket and screen, leaving the signal wires and earth wire free for further processing.
31-052
31-240
CANFORD FST-M - Foil Screened Stranded Conductor Twin Cable - Miniature
This D’n’A series (Digital and Analogue) cable is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be suitable for AES/EBU digital audio as well as analogue microphone and line level signals. Wire insulation is polypropylene, which shrinks back minimally during soldering (considerably less than PVC or polyethylene). It is a smaller version of the classic Canford FST, for use where space is at a premium.
CANFORD HST - Helical Screened Stranded Conductor Twin Cable A high performance range of general purpose extra-flexible twisted twin conductor, helical (“lap”) screened cables, suitable for both microphone and general purpose uses. The cable construction design is the result of extensive research by Canford Audio, and the University of Durham Engineering Department. The outer jacket is an extra-flexible, soft PVC with semi-matt finish.
30-150
CANFORD SQ Microphone Cable - Starquad
30-418
Designed for the transmission of sound through noisy areas the balanced quad cable is used as a twisted pair with capacitance unbalance characteristics designed to cancel out the worst kind of interference – external noise. The product is a flexible high quality cable for use in electrically hostile environments.
CANFORD FSJ - Foil Screened Stranded Conductor Individually Jacketed Multipair Cable Flexible and Low Fire Hazard type - This D’n’A series (Digital and Analogue) cable is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be suitable for AES/EBU digital audio as well as analogue microphone and line level signals. The individual cores are jacketed ready for termination directly into connectors etc., and the inner jacket is bonded to the screening foil so strips away in a single action. 31-512 FSJ - Individually jacketed multipair cable based on Canford’s FST-F ‘Flexible Foil Screened Twin’ in order to offer enhanced flexibility. FSJ-LFH - Low fire hazard (‘LSOH’) cable based on Canford’s FST-LFH twin conductor, foil screened cable, for installed applications.
CABLE MANAGEMENT PLASTIC CABLE TRAY
FIRE RATED CABLE CLIPS
35-6103 or 35-6104 CANFORD Plastic Cable Tray
39-1402 D-LINE SAFE-D30 U-CLIP, For 30 x 15mm trunking, pack of 100
35-6113 or 35-6114 Fixing brackets
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
SLEEVING
39-313 TECHFLEX EXPANDABLE SLEEVING Non-slip
35-742 TECHFLEX WRAPPABLE SPLIT BRAIDED SLEEVING
39-318 TECHFLEX EXPANDABLE SLEEVING
CABLE GRIP STRIP
39-0150
39-0151
39-0157
D-LINE floor cable management products to enhance public safety and protect cables.
COMMUNICATIONS SYSTEMS GREEN-GO IP Comms DISTRIBUTED IN THE UK AND IRELAND EXCLUSIVELY BY CANFORD Green-GO is an award winning, digital intercom system which operates over ethernet
26-788 GGO-MCXD
• No central matrix – substantial cost saving and no single point of failure! • Full duplex, clear audio, low latency, programmable • Create simple or complex systems - up to 250 Groups and 3000 Users • Ideal for live events, broadcast and industry
26-741 GGO-BPXSP 4-channel, weather resistant
26-775 GGO-BPX
26-786 GGOMCX
TECPRO 2-WIRE ANALOGUE SYSTEM Simple and intuitive to operate, Tecpro intercom enables a group of people to have a simultaneous, two way conversation in real time with excellent intelligibility. The size of the group can vary between 2 and 80+ people and they can communicate on up to two independent intercom groups. 27-511
BP511 SINGLE CIRCUIT BELTPACK (XLR-3 connectors) Tecpro beltpacks are tough, lightweight, remote intercom stations which are typically hung from the belt but can be used free standing or mounted on a suitable surface. They offer full-duplex operation and have been designed for portable use where care may not always taken by the user.
HS581 HEADSET STATION, SINGLE CHANNEL
27-581
Offering similar facilities to a beltpack, the Tecpro HS581 is a single channel Headset Station suitable for flush mounting to walls, table tops or control consoles. Cables are terminated to a fixed screw-termination block mounted on the PCB.
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| canford.co.uk
HEADPHONES HEADSETS FOR USE WITH TECPRO AND GREEN-GO TECPRO DMH320 and SMH310
DMH220 and SMH210
•H igh performance headsets specifically designed for communications use • V ery robust construction, made from unbreakable flexible composite material •D ual-chamber foam-filled ear-shells, larger than 200 series for wearing comfort •H igh acoustic isolation on DMH320 for reduced ear fatigue • E xtended response ear loudspeakers • B roadcast quality noise-cancelling dynamic microphone •N ew boom design allows use with boom at left or right hand side •M ic switched off by swinging boom upwards • B oom can be bent into optimum position to suit the wearer
• Very robust with only two moving joints • Hidden fixings hinder tampering whilst
27-320
27-310
allowing easy repairs
• Full range of spare parts available • Noise cancelling microphone on flexible steel-reinforced boom
• Steel core cable for extra strength • Soft comfortable cushions • Wide, smooth response for reduced listening fatigue
27-210
27-220
BOSE NOISE-CANCELLING HEADSETS
56-4004 SoundComm B30
Acoustic noise-cancelling technology, coupled with a noise-cancelling microphone and an earpiece cushion design providing a good acoustic seal, offers increased attenuation of lowfrequency noise providing clear audio for enhanced communications. Durable and robust design with an improved level of comfort achieved through the contoured headband and earpads, with good distribution of weight and low clamping force.
LEVEL LIMITED NEW CANFORD LEVEL LIMITED HEADPHONES DMH620 88dBA Canford is a specialist provider of headphone limiter technology. We offer level limited headphones from stock, or can evaluate and limit your preferred headphone to enable employers to take the necessary precautions required to protect user’s hearing.
• Users may plug the headphones into any available outlet (subject to avoiding ‘loading’ programme circuits)
• Users can not readily ‘bypass’ the protection limiting device, which are incorporated within the earcups
• That audio performance up to the point of limiting operation should be minimally affected by the limiting devices
• That devices should be available for the widest range of commercially
54-4045
available headphones and headsets
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
PANAMIC CARBON FIBRE BOOM POLES Panamic Boom Poles are made from the highest quality carbon fibre making them extremely lightweight with superb balance. Panamic Booms incorporate wear resistant nylon web handles and unique adjustable end stops which guarantee silent operation and significantly extend the working life of the boom.
• Silent operating Nylon Bushes & Precision Locking Rings help prevent jamming, sticking or binding and provide great resistance from dirt ingress
• Each section houses an Adjustable End Stop enabling quick adjustment and keeps each section tight, eliminates the risk of rattle noise from loose sections
Panamic p o l e s
a p a r t
• Strong, lightweight Carbon Fibre construction reduces bend
53-5812
and ensures precision positioning
• Tough corrosion resistant Titanium Tip is approximately 1/3 of the weight of an equivalent Stainless Steel Tip
• Durable and wear resistant Nylon Web Handle. The Rubber End Cap protects the carbon handle section from impact with the ground
MICROPHONES BEYERDYNAMIC M 58 MICROPHONE ENG Designed specifically for ENG use this omni-directional moving-coil microphone has a sophisticated internal shock-mount, dramatically reducing handling noise.
92-002
AVAILABLE FROM STOCK
LIGHTING LIGHTS AND SIGNS CANFORD ILLUMINATED SIGNS
51-028 CANFORD ILLUMINATED SIGN Lamp, BC, LED, 4 watt (32 watt equivalent), 230 volt
51-954 SCRIPT LIGHTS Low Voltage And Dali / Dsi Dimable Versions
51-6754 LITTLITE LED 1U RAKLITE 2 x 12 inch gooseneck lamps
51-302 LED SIGNAL LIGHT
51-901 TABLE CUE LIGHT
NEW CANFORD LED RACK LIGHT, MULTICOLOUR, 1U Made from aluminium the 1U rack light offers a light weight robust construction. The rack light can be quickly changed from white light to one of six colour options using the front mounted rocker switch. The colour can be pre-selected using the RGB dip switches on the rear of the unit and is powered via a 12v 2A plug in PSU. Connection is via a 2.1mm locking DC connector to ensure a solid connection when used within mobile racks. A USB socket is included on the front panel allowing for charging a mobile phone or similar device. Being only 100mm deep the rack light can easily fit behind most equipment installed within a rack.
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| canford.co.uk
POWER MAINS POWER DISTRIBUTION UNITS Canford design and manufacture over 240 different Mains Distribution Units (MDUs) in the UK. Our wide range of 1U rackmount MDUs are intended for broadcast and pro AV applications where system reliability is paramount.
42-9351
The Canford MDU range includes four input options, loop-through outlets, switched for un-switched, with a choice of red or green illuminated rocker switch or power present LED and Economy versions. Use our online Mains Distribution Selection Tool to find MDUs that meet your requirements.
POWER DISTRIBUTION PANELS AND FLOOR BOXES NEW EMO POWER DISTRIBUTION This range of modern 1U and 2U rack-mounting panels and floor boxes have been engineered by Canford specifically to provide a versatile, robust and safe solution suitable for powering a diverse combination of equipment. They are more commonly used in mobile racks and flight cases for temporary installations in live entertainment, including modern theatre, touring systems, location recording and outside broadcast work though their unique design and configuration makes them also equally suited to many fixed installs. All Rackmount models have LED Traffic Light Indicators to show Supply Present, Earth Present and Neutral Fault status which can be disabled via a rocker switch for low light on stage use and to enable PAT testing. All output connectors are wired via overcurrent thermal circuit breakers. Earth Grounding points feature on the rear of all models as standard. Floor boxes are fitted with either a 15A Over Current Thermal Breaker or a 16A RCBO giving both overcurrent and earth leakage protection, especially useful when connecting equipment with unknown maintenance history.
42-621
42-614
AC MAINS POWER CONNECTORS POWERCON 20 AMP
42-3006
Neutrik Powercon NAC3FCA 20 Amp connectors terminated to Duraplug UK 13A plugs. All types use 13Amp, 3 x 1.5sq.mm cable with Arctic PVC flexible jacket. Plugs are fused with a 13A fuse.
IEC-LOCK IEC 60320 (CEE22) These patented design, IEC 60320 connectors have an internal locking mechanism which mates with and locks to any male C14 (inlet), to provide a simple way of securing a power cable to any electrical equipment. They are invaluable for use with critical equipment, either free-standing or rack-mounted and in areas subject to vibration, such as outside broadcast vehicles, touring and ‘fly-away’ kit, where standard connectors may become dislodged in transit. They are available in two forms; female C13 type (outlet) cable connectors for use between appliances and their mains power sources and female F type (outlet) panel connectors for use as an interconnection between one appliance and another. 42-3640 IEC-LOCK IEC MAINS CONNECTOR C13 type, female, cable, locking, horizontal left/right, rewireable
42-3200 IEC-LOCK IEC MAINS CONNECTOR Female cable, locking, rewireable
42-3641IEC-LOCK IEC MAINS CONNECTOR C13 type, female, cable, locking, vertical up/down, rewireable
canford.co.uk
42-3300 IEC-LOCK IEC MAINS CONNECTOR F type, female panel, snap-in