Broadcast, Pro Audio and AV Solutions

Page 1

BROADCAST, PRO AUDIO AND AV SOLUTIONS canford.co.uk


FIBRE HDMI RANGE EXTENDING CABLES OXLINX CABLES offer a considerably more elegant and cost-effective solution for long HDMI cable runs than Cat5E cable with converter box systems.

fed through voids or behind plaster board. Other benefits may include applications where cables must pass through congested and/or small apertures, such as internally wired brackets and mounts. Custom screw-locking micro HDMI-D to HDMI-A adapters are supplied with LHM-P pluggable cables. The active electronics, which convert the electrical signal to optical and back, are housed within the body of the HDMI connectors with minimal effect to the overall size (cross section of 19.6mm x 11.2mm).

They are intended for commercial AV and Broadcast installations where longer cable run lengths than those obtainable with standard copper HDMI cables are required. Applications may include professional AV systems interconnection, digital signage (DOOH) and kiosks, plus home theatre systems in larger properties.

Unlike many other HDMI range extending products, no external power supplies are required. OxLinx cables are powered via the HDMI sockets of the connected device and power consumption is low @ 0.5W. All cables have a dual rated jacket which conforms to both LSOH (low smoke zero halogen) and CMP-OF (UL Plenum) standards for use in public buildings.

EMI and RFI immunity makes them also useful where the cable needs to pass through environments with high electrical interference.

Contractor friendly, the cable diameter is only 3.4mm and comprises four optical fibres for the video and audio signals, six copper wires for HDMI control signaling and CEC functions. Kevlar reinforcement gives a pulling strength of 500N (50kg).

OxLinx cables are HDMI 1.4 compliant and compatible with video resolutions up to and including 4K @ 30Hz, 1080p @ 60Hz Full HD deep colour 48bit, 3D and multi-channel embedded audio to include PCM 8 channel, Dolby Digital True HD and DTS-HD Master Audio.

The directional plug & play hybrid cable assemblies are available now exclusively from Canford in the UK and are offered in incremental lengths ranging 10 to 100mtrs. See the Lusem OxLinx page for details. www.canford.co.uk/Lusem

Two versions are offered, LHM-N terminated with standard HDMI Type-A connectors and LHM-P which are terminated with micro HDMI Type-D connectors. Also known as the “pluggable� versions, LHM-P cables were developed to aid fixed installation. The micro HDMI connectors reduce the likelihood of snagging as the cable is pulled through conduit,

Lusem is a subsidiary of LG Corporation in Korea and focuses on design and manufacture of display circuit devices for LG Display & LG Electronics.

HDMI

LUSEM OXLINX LHM-NL10 HDMI Active optical cable

Contact:

Micro HDMI

Code

Length

Code

Length

38-8801

10m

38-8861

10m

38-8802

15m

38-8862

15m

38-8803

20m

38-8863

20m

38-8804

30m

38-8864

30m

38-8811

40m

38-8865

40m

38-8805

50m

38-8866

50m

38-8806

60m

38-8867

60m

38-8807

70m

38-8868

70m

38-8808

80m

38-8869

80m

38-8809

90m

38-8870

90m

38-8810

100m

38-8871

100m

UK Sales: +44 (0)191 418 1122

|

sales@canford.co.uk

LUSEM OXLINX LHM-PL10 MICRO HDMI-D PLUGGABLE Active optical cable, HDMI-D to A adapters,

|

www.canford.co.uk


SENKO XP FIT PLUS ‘Field Installable Connector’ The SENKO XP Fit Plus, is a pre-polished pre-assembled connector compatible with standard SC and LC Connectors. No epoxy is required as an internal mechanical grip effectively holds the fibre in place and can be installed in under 2 minutes. SC 50-1511

LC 50-1521

SENKO XP FIT PLUS TERMINATION KIT WITH PRECISION FLAT CLEAVER The installation kit contains everything needed for installation of SC and LC XP Fit Plus connectors. No epoxy, polishing film or other consumables are required. No need for electrical power to complete terminations.

SENKO SMART PROBE Easily connects to Laptops, Smartphones & Tablets.

50-1526

This Smart Probe 2 includes several enhanced hardware features over the existing 1.5 model. • Improved stronger battery cover • Battery tags easing removal from the case • Upgraded CMOS sensor providing wider field of view • Re-alignment of the on off switch and mini USB port

SENKO MPO, ST, LC, SC SMART CLEANERS

Smart Probe 1.0 versions are still available

50-1501

50-1531 SENKO SCK-VM2000-01 SMART PROBE Wi-Fi FIBRE INSPECTION TOOL

ALSO AVAILABLE SENKO IP-SERIES SENKO IP-Series is an effective and low cost connector for harsh environmental applications. IP-LC connector meets IP68 environmental sealing requirements, an ideal choice of harsh broadcast applications. Its bayonet locking system is designed to the IEC 61076-3-106 interface standard, also available in IP-SC & IP-MPO.

International Sales: +44 (0)191 418 1133

| international@canford.co.uk

| www.canford.co.uk


NEW CANFORD FIBRE FIELD TERMINATION RACKMOUNT CASE The new Canford Fibre Field Termination Rackmount Case is designed to facilitate a fast, easy and effective solution for installing hybrid fibre connectors on site and eliminates the need for pre-terminated cable assemblies. The boxes come complete with up to 8 x Lemo 3K.93C EDW or FMW cable assemblies pre-fitted in either a flat or angled 2U front panel. The SMPTE cable enters the chassis via rear cable glands and the strain relief is secured to the clamping post.The electrical cables are then terminated directly to the AMP connector provided on the internal bulkhead.The fibre cables terminate directly to the SC coupler on the same bulkhead using Senko XP Fit Plus connectors or alternatively via SC tails which are spliced to the incoming fibre using the internal splice tray. This system not only provides improved protection to both the electrical and fibre connections which are secured within the case but also allows for quick and easy replacement/repair of any failed SMPTE connectors.

CANFORD 1U UNIVERSAL KEYSTONE PANELS ‘Total flexible solution’ 1U, 19”, 24 way keystone panel available in Grey or Black. Interchangeable keystone modules available in CAT6, CAT6A, CAT5E, SC Fibre, LC Fibre, ST Fibre, HDMI, USB2, USB3, RJ11 / 12, BNC 50Ohm, 75Ohm & HD, F Type, 3.5mm Jack also Feedthrough modules available in CAT6, CAT6A & CAT5E, panels also available in 8 & 16 way. Code Grey 44-3791 44-3793

Black 44-3792 44-3794

44-3795

44-3796

Panels Options 1U24 way 1U16 way 1U 8 way

ADAPTORS - ‘D’ CUT OUT / KEYSTONE ‘D’ cut out / keystone adaptor this gives the ability to use keystone modules with ‘Canford Universal’ ‘D’ cut out panels available in 1U - 8way, 12way, 16way, 2U - 32way and 3U - 48 way, three colour - Grey, Dark Grey & Black. Keystone modules available in CAT6, CAT6A, CAT5E, SC Fibre, LC Fibre, ST Fibre, HDMI, USB2, USB3, RJ11 / 12, BNC 50Ohm, 75Ohm & HD, F Type, 3.5mm Jack, also Feedthrough modules available in CAT6, CAT6A & CAT5E.

Contact:

UK Sales: +44 (0)191 418 1122

|

Code

Panels

Grey 45-3355 45-3365 45-3390 45-3352

Dark Grey 45-3356 45-3366 45-3387 45-3388

Black 45-3357 45-3367 45-3391 45-3393

Options

45-3394

45-3389

45-3395

3U 48way

sales@canford.co.uk

|

1U 8way 1U 12way 1U 16way 2U 32way

www.canford.co.uk


CANFORD CAT5E, CAT6 and CAT6A RJ45 FEEDTHROUGH PRO PATCH PANELS UNSCREENED Supplied fully populated with feed-through (also known as double-sided or back-to-back) unscreened RJ45 CAT5E sockets enabling system patching and easy connection of portable or external equipment. A printable designation-strip with snap on cover and a lacing bar are fitted as standard. Feedthrough modules available in CAT6, CAT6A & CAT5E, panels also available in 8 & 16 way. SCREENED Supplied fully populated with feed-through (also known as double-sided or back-to-back) screened RJ45 CAT6A sockets enabling system patching and easy connection of portable or external equipment. A printable designationstrip with snap-on cover and a lacing-bar are fitted as standard. Code

Description

45-3448 1U 1x24 FEEDTHROUGH, unscreened, grey

Code

Description

45-3429 1U 1x24 FEEDTHROUGH, screened, black

45-3445 1U 1x16 FEEDTHROUGH, unscreened, black 45-3424 1U 1x16 FEEDTHROUGH, screened, grey 45-3469 1U 1x24 FEEDTHROUGH, screened, black

45-3533 1U 1x24 FEEDTHROUGH, Screened, grey

45-3464 1U 1x16 FEEDTHROUGH, screened, grey

45-3536 1U 1x24 FEEDTHROUGH, Screened, black

CANFORD DEPLOYABLE CATEGORY 6 DATA STRANDED CONDUCTOR CABLE Increasing use of network and data cables between audio and video devices on location calls for a Category 6 cable that is designed specifically for deployable use. Basic Category 6 UTP is a relatively inflexible installation cable, and even the slightly more flexible patchcord type still has very poor handling characteristics in deployed (as opposed to patching) applications. This Category 6 cable has been designed specifically for the professional audio and video user, and is intended to handle like a typical microphone cable. It has an extraflexible four-pair core structure that maintains Category 6 performance, then a special soft PVC composite material outer jacket, to give superb flexibility and handling characteristics. It is suitable for use with both standard RJ45 connectors (round entry version), the Neutrik Ethercon and most other ruggedised RJ45 designs, or any other connector with a suitably sized entry gland. The cable is also suitable for DMX512 applications.

31-870

DRAKA CAT6 SHIELDED DRAKA Category 6 U/FTP 4 twisted pair solid conductor cable, patented foil wrapping of two pairs 1 & 2, 3 & 4, Low Fire Hazard jacket (LSHF). Also available as a Category 6 S/FTP 4 twisted pair solid conductor cable, patented foil wrapping of two pairs 1 & 2, 3 & 4, with overall Braid, Low Fire Hazard jacket (LSHF).

International Sales: +44 (0)191 418 1133

31-936 U/FTP, LFH Jacket (Blue)

| international@canford.co.uk

31-928 S/FTP, LFH Jacket (Blue)

| www.canford.co.uk


455 SERIES by Can f ord

IP55 SEALED OUTDOOR CABINETS

A range of IP55 weather-proof wall mounting cabinets available in 7, 9, 12 and 16U heights and 450mm and 600mm depths. These are ideally suited to stadium, theatres and warehouses which are exposed to dust and damp conditions.

• Fully welded mono-block construction • Sloping roof canopy • Gasket sealed steel door • 3-point locking mechanism • Protection against dust, rain, sleet and snow • Optional 1 or 2 fan modules • Load Capacity: 100kgs • Available with glass sealed door, rating IP54

15-1901

466 SERIES by Ca nf o rd

IP66 WALL CABINETS

A new addition to the Enclosure Systems range of wall mount cabinets, designed for use in outdoor open areas subject to the full force of the elements or harsh internal environments such as chemical plants or marine applications. Manufactured in steel, offering sealing to IP66, the 466 series are available in three heights, two widths, three depths and three finishes. Finishes are Light grey, RAL 7035, powder coat, AISI 304 pre-grained stainless steel and AISI 316L pre-grained stainless steel. All units have a full steel, lockable front door offering both 130 degree opening and left or right operation. Rack profiles are recessed 50mm or 100mm from the front depending on the model. Cable access is available on the base of the painted cabinets and these are supplied complete with one cover plate and polyethylene gasket to maintain IP66 sealing.

SS304L 15-3091 SS316L 15-3111

GREY 15-3071

• Rated to IP66 against water and dust ingress • Fully welded construction for strength and rigidity • Fully sealed and lockable steel door • Full and half rack versions available • 8U, 12U & 16U heights available • 210mm, 300mm & 400mm depths available • Rack profiles recessed from front 50mm or 100mm depending on model

Contact:

UK Sales: +44 (0)191 418 1122

|

sales@canford.co.uk

|

www.canford.co.uk


COMING SOON by C a nf o rd

NEW DESIGN FLOOR CABINETS

Recent months have seen the introduction of some new products to Canford’s 19” rack cabinet offering, both to the established Enclosure Systems brand as well as some newly introduced Lande product. The coming weeks will also see the introduction of the new Enclosure Systems 362 Series and 396 Series Network and Server floor standing rack ranges. Brought in to complement the existing Enclosure Systems 262T and 296S products and offering a number of new and updated features. The new floor standing ranges will be available in 8 heights, two widths and three depths. Finished in black and light grey, assembled offered as standard.

PROLINE SERIES by Canf o rd

WALL CABINETS

Suited to data networking, CCTV security and audio visual applications, the Proline Series offers a range of cabinets to rack-mount 19-inch equipment on walls. Side and rear panels are removable, with the rear panel having a large cable entry cut out. The Proline series can also be used with accessory castors or levelling feet, when the cabinets are being used in free-standing or under-desk applications.

• Riveted construction for strength and rigidity • Full length smoked, shatter-proof glass lockable front door • Removable side panels for easy access • Removable ‘easy install’ rear panel NEW • 7U, 9U, 12U, 16U & 20U heights available • 450mm and 600mm depths available • F ront & rear 19” mounting profiles on 600mm deep models, front only on 450mm models

• F loor standing/under desk applications possible with optional Castor sets and levelling feet

• Available in black and grey finish

International Sales: +44 (0)191 418 1133

BLACK: 15-5502 GREY: 15-5002

| international@canford.co.uk

| www.canford.co.uk


CANFORD BNC TERMINATION PANEL using Coax connectors 6G, 4K UHD, 75 ohms BNC’s These “Ultra High Definition” angled BNC termination panels are intended for 6G 4K ultra high definition, 3G and 1.5G high definition, standard definition and analogue video applications. The performance exceeds the requirements of SMPTE292M, SMPTE424M and SMPTE ST 2081-1 making them suitable for composite and component video, 270 Mb/s SDV, uncompressed 1080i or 1080p HD-SDI video and 4K UHD video up to 6G. All BNC Termination panels above are available finished in Dawn Grey (BS4800-10A03) or Black. Code

Description

48-4051

Canford BNC Termination Panel, 6G, 4K UHD, 75 ohms

48-4161

Canford BNC Termination Panel 6G, 4K UHD, 75 Ohms - Angled

48-4171

Canford BNC Termination Panel 6G, 4K UHD, 75 Ohms - High Density

CANFORD TAILBOARD PANEL These 19 inch, rack-mounting, panels are designed to support camera, video and audio connectors on the tailboard of outside broadcast vehicles, in studio or stadia wall-boxes, or in ‘fly away’ racks or flight-cases.

47-9103 Angled CANFORD Tailgate and Wallbox Panels Audio, Triax SMPTE, Ccz-A and Fibre

ANGLED PANELS

47-9108 Flat

Manufactured from a unique ‘Z’ profile aluminium-extrusion, are also available, which present the connector axis at a 23.5 degree downward angle.This angle relieves strain on the cable connector termination and eases mating during rigging.

FLAT PANELS Flush or flat versions have a horizontal connector mating axis.

CANFORD 32 WAY MUSA 3G HD-SDI The 1U, 32 way MUSA panel offers the highest possible packing density. The Canford MUSA is optimised for 3G HD-SDI and exceed the requirements of SMPTE292M and SMPTE424M. Extremely cost effective, no moving parts or springs and closed entry connectors make them ideal for OB and fly-away harsh environments and studio applications.

Code

Description

48-4381

CANFORD MUSA 3G HD PATCH PANEL 1U 2x32 MUSA 3G HD, grey

48-4382

CANFORD MUSA 3G HD PATCH PANEL 1U 2x32 MUSA 3G HD, dark grey

48-4383

CANFORD MUSA 3G HD PATCH PANEL 1U 2x32 MUSA 3G HD, black

Contact:

UK Sales: +44 (0)191 418 1122

|

sales@canford.co.uk

Order U-Links separately for example 48-4410

|

www.canford.co.uk


NEW CANFORD RACK PODS

For applications deserving of something better Many of today’s Commercial Audio Installations not only call for a functional solution but also require an aesthetically pleasing finish. These luxurious wooden rack pods offer exactly that for the housing of A/V equipment, such as amplifiers, media players and patch panels. Available in 3 heights and a depth of 500mm, they come supplied with an inset high-gloss tinted acrylic lockable door for security. Finished in Ash, Beech or Oak as standard with other wood finishes available to special order. Exclusively available from Canford, contact Enclosure Systems Product Manager: Graeme Lyon for more details on this range.

• S uitable for Commercial Audio Installations, Background Music Systems & Studios

• High-Gloss, black, 5mm acrylic door • Lockable for security • Adjustable rack strip front and back for custom fit set-up • 450mm useable rack depth for Amps & Media players • Available in 4U, 6U and 8U Height 4U 6U

Ash 15-1634 15-1636

Oak 15-1644 15-1646

Beech 15-1654 15-1656

8U

15-1638

15-1648

15-1658

419 SERIES by Canf o rd

WOODEN FLOOR STANDING RACK CABINETS

With a rather more sophisticated appearance than steel racks, the 419 Series of rack cabinets are manufactured with timberveneered particle board to suit the decor of studio, educational, corporate and commercial environments. Available in Ash or Oak veneer as standard, the 419 series can be manufactured in a client specific finish to special order if required.

• 12U and 18U rack heights • 600mm and 800mm depths • Fully adjustable U-printed rack profiles • Medium duty castors • Cable management in base •Q uick-release solid rear door with round lock and ventilation slots • Quick-release solid front door with round lock Height 12U 18U 12U

Ash 15-1101 15-1102 15-1104

Oak 15-1107 15-1108 15-1110

18U

15-1105

15-1111

Width 600 800

Other finishes available on request

International Sales: +44 (0)191 418 1133

| international@canford.co.uk

| www.canford.co.uk


VOICE TECHNOLOGIES Swiss Precision for Excellent Audio Quality. High end miniature microphones. VT403WA Ultra-Miniature Lavalier Mic, Omni

VT901MkII Headworn Microphone, Omni

• Low noise, withstands high SPL • Easy to hide • Water resistant

• Low profile, almost invisible in use • New earhanger design for comfort • Replaceable cables with choice of popular connectors

74-6905

74-6902

RYCOTE CYCLONE • R adical new design and shape delivers a new pinnacle in audio transparency, wind noise and handling noise isolation. • Lightweight, durable construction, designed with materials to withstand extreme field conditions. • F eaturing 3D-Tex® delivering massive wind noise reduction without needing additional fur coverings. • B asket Z-Locking design, with magnetic locking, provides instant, one-hand microphone access with automatic, self-aligning basket reassembly.

• S wivel latches provide additional basket security for extreme environments and run-and gun applications.

• Increased acoustic transparency, and no parallel surfaces to minimise

74-9373

room-tones, provides a clean frequency response.

• A ll-new, patented Floating-Basket Suspension with Lyre technology for reduction of windshield basket handling noise.

GET CLOSER TO THE ACTION - SPORTS ‘PLAYER MICS’ Designed to be safely worn by athletes participating in major contact sports like rugby, the new QT-5100 PlayerMic wireless transmitters from Q5X will withstand the huge shocks generated during full speed collisions on the playing field. The miniature, remote controllable transmitters are only 42mm wide, 9mm thick and are available in two lengths - 78mm and 99mm. Operating times are 3.5 and 8 hours respectively at 50 mW transmit power. QT-5100 PlayerMic transmitters have a rubberised, water resistant casing with two flexible antennas and a flying lead for attaching a microphone. The transmitter is typically worn inside a pocket stitched into the back of a sports compression vest and the mic is taped to the front of the vest. The team shirt hides the audio system. Using a handheld QG-H1 MicCommander wireless remote control, Q5X PlayerMics can be remotely configured. Programmable features include mic on/standby, battery check, mic gain, transmitter power and RF channel selection. Once the player is mic’d up, controlling the transmitter settings remotely avoids disturbing the athlete’s concentration. 74-5411

Contact:

UK Sales: +44 (0)191 418 1122

|

sales@canford.co.uk

|

www.canford.co.uk


NEW SYSTEM 10 CAMERA-MOUNT • Camera-Mount is the latest addition to Audio Technica’s System 10 range of compander free wireless microphone systems.

• Audio Technica Camera-Mount is a portable system for use with DSLR and semi-professional video cameras.

• System 10 Camera-Mount is available in handheld or body-pack

(UniPak) transmitter configurations. A maximum of four systems (channels) can be used in a single location without any frequency coordination or group selection issues.

• All systems are supplied complete with the ATW-R1700 lightweight diversity receiver which provides independent headphone monitor output.

• An LCD provides system information such as RF

signal level, System ID and battery status of both the transmitter and receiver units.

• T he receiver is powered by an internal rechargeable

Li-Ion battery which can provide up to 12 hours usage.

Code

Description

74-4557

ATW-1701 RADIOMIC SYSTEM Beltpack, no microphone, 2.4 GHz

74-4558

ATW-1702 RADIOMIC SYSTEM Handheld, unidirectional, 2.4 GHz

74-4559

ATW-1701/P RADIOMIC SYSTEM Beltpack, ATR35cW omni, 2.4 GHz

GREEN-GO DIGITAL INTERCOM OVER ETHERNET Unlike other digital intercom designs, Green-GO does not employ an expensive central matrix. All interconnection routing data, system set-up and user preferences are stored locally within each user station including beltpacks, which eliminates the possibility of a catastrophic central failure. Green-GO does not require a dedicated Ethernet network. It will operate on any 100Mbit network without interfering with other data protocols coexisting on the system, including Dante. User stations are powered by Power over Ethernet (PoE). If PoE is not available locally, any good quality PoE switch may be used including Green-Go’s own 5-port switch. Audio quality is high and latency is only 12ms. Useful features include channel ident, display of simple text messages and cue light facilities. System set-up is carried out via a laptop using free software for PC or Mac which can be downloaded from the Green-GO website.The current range includes beltpacks, wall stations, multi-channel desks (8, 16, 24 and 32 channels) and interfaces for integrating with analogue two and four-wire intercom systems.The recently introduced bridge interface enables venues in different locations to link their Green-GO comms together via the internet, while retaining full system functionality. A basic intercom system can be created with just two beltpacks and, if Power over Ethernet is not available, a PoE switch. It can then be expanded as technical requirements and budget dictate. With no heavy investment required for a central matrix, Green-GO offers a uniquely cost effective way to build a digital intercom system, making the latest technology available to many who, up to this point, found it hard to justify the expense.

26-752 GBP2B DIGITAL Beltpack

International Sales: +44 (0)191 418 1133

26-753 MCD8 DIGITAL Desk Station

26-765 GGO-PSU12V POE Ethernet Switch

| international@canford.co.uk

| www.canford.co.uk


CANFORD MAINS DISTRIBUTION UNITS ECONOMY MDU • 1U 19” MDU 15 x fused IEC outlets • Bi-Colour LEDs indicate fuse Ok or Fuse Fail • Robust all steel case - Black • Un-switched with Red or Green LED power indication • Available Ex-stock Options

• IEC or Powercon ‘In with Loop out • Switched with Red or Green illuminated two pole switch

Code

Description

42-9112 thru 42-9116

Canford Economy IEC

42-9122 thru 42-9128

Canford Economy Powercon

TWIN INPUT MDU • 1U 19” Twin input 2 x 7 (14 total) Fused IEC Outlets, independent feeds (provides assurance that should power fail 50% of MD will continue)

• Bi-Colour LEDs indicate fuse Ok or Fuse Fail (allows quick visual check of potential power failure) • Un-switched with 2 x Red or Green LED power indication Options

• IEC Input, Powercon Input or with 3m Hardwired Cable Input

• Switched with 2 x Red or Green illuminated two pole switch

• Available in Black or Grey Code

Description

42-8311 thru 42-8318

Twin input IEC

42-8321 thru 42-8328

Twin input Powercon

CANFORD MDU AC Mains Power Distribution Units Professional 12 or 14-way panels, rated at 10, 20 or 32 amps, housed in a compact 1U rackmount case. A variety of inlet and outlet connectors are combined with outlet switches, front-panel mounted fuses, sequential switch-on & switch-off and filter options. The range now has well over 300 variations. 42-9351

Contact:

UK Sales: +44 (0)191 418 1122

|

sales@canford.co.uk

|

www.canford.co.uk


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.