Fibre • Audio • Video • Power • Comms
BROADCAST, PRO AUDIO AND AV SOLUTIONS Canford Middle East
FIBRE TERMINATION SERVICE Qualified and speedy service The nature of the broadcast market often means customer requirements are urgent and so Canford’s fibre service was set-up to offer a short lead-time for the termination of broadcast connectors: LEMO SMPTE and Neutrik opticalCON. Fibre termination is delicate, precision work. Canford staff complete specialist certified training programmes before they can produce the mission critical cables which are often deployed at broadcast studios, premier football grounds and other outside broadcast venues. Test certificates are available if required, and will certify curvature radius, linear and angular offset, spherical fibre height along with a 3D illustration of the ferrule profile.
• Short lead-time for situations where speed is of the essence • Tested to IEC and Telcordia standards for complete geometry inspection • Termination of LEMO, Neutrik and other fibre connectors • Ready-made and custom cable assemblies
NEW SMPTE PRE-TERMINATED CABLES Canford now offers a variety of SMPTE fibre cables including Furukawa, Draka, Belden OCC and Percon that are kept in stock to ensure quick turn-around times on the cable assemblies. Cables can be terminated to customers’ specification using LEMO connectors as well as LCs, SCs and STs. Pre-terminated cables can be used in conjunction with the Canford Hybrid Fibre Field Termination Box.
Code
Description
36-610
DRAKA SMPTE311 FIBRE HDTV CAMERA CABLE, PUR
36-611
DRAKA SMPTE311 FIBRE HDTV CAMERA CABLE, FRNC, LFH
36-613
FURUKAWA TV-OM-FAMS SMPTE HD CAMERA CABLE, 6.8mm A grade SMPTE fibre
36-614
FURUKAWA 92SM-6.8-98.3 SMPTE HD CAMERA CABLE, 6.8mm J grade ARIB fibre
36-615
FURUKAWA TV-OM-AMS SMPTE HD CAMERA CABLE, 9.2mm A grade SMPTE fibre
36-616
FURUKAWA 92SM-9.2-37.5 SMPTE HD CAMERA CABLE, 9.2mm J grade ARIB fibre
36-617
FURUKAWA 92SM-16-37.5 SMPTE HD CAMERA CABLE, 16mm J grade ARIB fibre
36-680
OCC SMPTE “Essential” SMPTE HD CAMERA CABLE
60-7804EPU
BELDEN PUR SMPTE HD CAMERA CABLE
60-7804ECH
BELDEN FRNC LFH SMPTE HD CAMERA CABLE
60-7804E
BELDEN PVC SMPTE HD CAMERA CABLE
36-670
PERCON SMPTE HD CAMERA CABLE
LUSEM OXLINX ACTIVE OPTICAL HDMI CABLES Range extending optical HDMI cables intended for fixed installation where longer cable-run lengths than those obtainable with standard copper HDMI cables are required or, where cabling needs to pass through environments with high electrical interference.
• 4K 30Hz, 3D, Deep Colour • Cables are available in a range of lengths from 10 to 100mtrs • Multi-channel Audio, Dolby TrueHD, DTS-HD Master Audio • No additional external powering required (powered from connected HDMI devices) • EMI & RFI Immunity • Plug and Play operation • Hybrid copper/optical fibre cable for extended range DUBAI Office Contact: Tel +971 50963 1201
|
danny.zacharia@canfordme.com
38-8861
NEW CANFORD ANGLED UNIVERSAL PANEL Based on the same design as the opticalCON Field Termination Box these panels are supplied in 8 and 12 way and incorporate a simple cable management plate at the rear. They are suitable for use with any D series/Universal series connector and suited to applications where it is beneficial to relieve the stress on the mating cable.
NEW CANFORD LEMO BREAKOUT BOXES We have extended our range of Optical breakout boxes to include LEMO SMPTE connectors. Our new breakout boxes allows the LEMO SMPTE connectors to be broken out into either SC, LC, ST, opticalCON Duo or opticalCON Quad connectors giving the customer the flexibility to mix different formats together.
VIDEO Subscribe to our YouTube channel
50-0371
CANFORD OPTICALCON BREAKOUT BOXES Where multi-way fibre cables fitted with Neutrik opticalCON Dual or opticalCON Quad connectors are used to provide a point-to-point link, these break-out boxes split the two or four channels to a variety of other formats including; Duplex LC, SC and ST connectors, depending on the model. The connectors are mounted in a rugged, extruded enclosure, suitable for use in broadcasting and live-event environments. Both multi-mode and single-mode types are offered. These designs are assembled to order, in short time scales, using stocked modules. Alternative configurations such as mixed LC, SC and ST connections can also be accommodated. Code
Description
50-0301
CANFORD OPTICALCON QUAD BREAKOUT BOX 2X DUO MM
50-0302
CANFORD OPTICALCON QUAD BREAKOUT BOX 2X DUO SM
50-0305
CANFORD OPTICALCON QUAD BREAKOUT BOX 4X SC MM
50-0308
CANFORD OPTICALCON QUAD BREAKOUT BOX 4X ST SM
50-0312
CANFORD OPTICALCON DUO BREAKOUT BOX 1X LC DUPLEX SM
50-0314
CANFORD OPTICALCON DUO BREAKOUT BOX 2X SC SM
International Sales: Tel +44 (0)191 418 1133
|
international@canford.co.uk
|
www.canford.co.uk
SENKO XP FIT PLUS TERMINATION KIT with Precision Flat Cleaver The installation kit contains everything needed for installation of SC and LC XP Fit Plus connectors. No epoxy, polishing film or other consumables are required. No need for electrical power to complete terminations.
50-1526
SENKO XP FIT PLUS ‘Field Installable Connector’ The SENKO XP Fit Plus, is a pre-polished pre-assembled connector compatible with standard SC and LC Connectors. No epoxy is required as an internal mechanical grip effectively holds the fibre in place and can be installed in under 2 minutes. SC 50-1511
LC 50-1521
NEW ADDITION: 50-1518 SENKO XP FIT PLUS FIBRE CONNECTOR ST, SM, 250/900um, 50-1517 SENKO XP FIT PLUS FIBRE CONNECTOR SC, MM, 62.5/125, 250/900um, 50-1519 SENKO XP FIT PLUS FIBRE CONNECTOR ST, MM, OM3,50/125,250/900um, 50-1529 SENKO ASSEMBLY JIG with base, for ST fibre connector
SENKO SMART PROBE
50-1531 SENKO SCK-VM2000-01 SMART PROBE Wi-Fi FIBRE INSPECTION TOOL
Easily connects to Laptops, Smart-phones & Tablets. This Smart Probe 2 includes several enhanced hardware features over the existing 1.5 model. • Improved stronger battery cover • Battery tags easing removal from the case • Upgraded CMOS sensor providing wider field of view • Re-alignment of the on off switch and mini USB port
50-1532 SENKO SPARE TIP 1.25mm PC-male, 50-1533 SENKO SPARE TIP 2.5mm PC-male, NEW ADDITION: 50-1536 SENKO SPARE TIP 2.0mm LEMO SMPTE
SENKO FIBRE CONNECTOR CLEANERS Smart series SENKO Smart Cleaners have been specifically designed to allow cleaning of fibre connections that reside in a bulkheads, adapters or faceplates without the need to remove the connector. Simply pushing the cleaner into the bulkhead, adapter or faceplate until the unit ‘clicks’ will clean the face with a ‘twist and wipe’ motion. Both re-usable and disposable alternatives are offered. The re-usable cleaner allows more than 750 cleanings per cartridge and, once spent, the cartridge can then be replaced. Replacement cartridges are offered in packs of three; 50-1503 for LC, MU or 50-1505 for SC, FC,ST, E-2000. The disposable cleaners offer in excess of 400 cleanings for the SC/FC, MU/LC and the cassette cleaner types. The MPO/MTP types offer more than 600 cleanings. NEW ADDITION: SENKO SCK-SS-M-200SMART CLEANER MINI FIBRE CONNECTOR CLEANER DISPOSABLE, FOR LEMO
DUBAI Office Contact: Tel +971 50963 1201
|
50-1501, 50-1502, 50-1507
danny.zacharia@canfordme.com
CANFORD ST FIBRE TERMINATION PANELS AND RACKCASES Broadcast Style, SENKO
46-3573
fibre Couplers Fibre patch-panels supplied fully-populated with industry-approved SENKO ST fibre through-couplers. They feature zirconia (SM) or phosphor bronze (MM) ferrules and tight-tolerance housings to ensure exceptionally accurate connector alignment and fibre face-contact, resulting in lower loss and greater reliability than commercial grade types. Available up to 48 way in 1U. The robust panel design features a rigid aluminium extrusion and a cranked lacing-bar, giving support to rear patchcords or bulk fibres and giving easy access to the rear sockets. 46-3767
CANFORD LC FIBRE TERMINATION PANELS AND RACKCASES Broadcast style, SENKO fibre couplers, MM and SM A range of broadcast-style, fibre termination patch-panels supplied fully-populated with industry-approved SENKO LC fibre through-couplers. They feature zirconia (SM) or phosphor bronze (MM) ferrules and tight-tolerance housings to ensure exceptionally accurate connector alignment and fibre face-contact, resulting in lower loss and greater reliability than commercial-grade types. The SENKO couplers also feature an internal ‘light shutter’ which although not an environmental seal, does offer some protection from large particle ingress and protects against laser spillage from unmated ‘live’ ports.
46-3736
46-3907
CANFORD SC FIBRE TERMINATION PANELS AND RACKCASES Broadcast style, SENKO fibre couplers, MM and SM A range of broadcast-style, fibre termination patch-panels supplied fully-populated with industry-approved SENKO SC fibre through-couplers. They feature zirconia (SM) or phosphor bronze (MM) ferrules and tight-tolerance housings to ensure exceptionally accurate connector alignment and fibre face-contact, resulting in lower loss and greater reliability than commercial-grade types. The SENKO couplers also feature an internal ‘light shutter’ which although not an environmental seal, does offer some protection from large particle ingress and protects against laser spillage from unmated ‘live’ ports.
46-3854
46-3827
CANFORD FIBRE PATCH CABLES Multimode and singlemode duplex patchcords, available terminated in combinations of ST, SC and LC connectors. 46-4436 SC-SC MM DUPLEX OM3 50/125 Fibre patch cable 50-0511 LC-LC MM DUPLEX OM3 50/125 Fibre patch cable
International Sales: Tel +44 (0)191 418 1133
46-4497 ST-ST SM DUPLEX OS1 9/125 Fibre patch cable
|
international@canford.co.uk
|
www.canford.co.uk
CANFORD FIBRE FIELD TERMINATION RACKMOUNT CASE Designed to facilitate a fast, easy and effective solution for installing hybrid fibre connectors on site and eliminates the need for pre-terminated cable assemblies. The boxes come complete with up to 8 x Lemo 3K.93C EDW or FMW cable assemblies pre-fitted in either a flat or angled 2U front panel. The SMPTE cable enters the chassis via rear cable glands and the strain relief is secured to the clamping post. The electrical cables are then terminated directly to the AMP connector provided on the internal bulkhead. The fibre cables terminate directly to the SC coupler on the same bulkhead using SENKO XP Fit Plus connectors or alternatively via SC tails which are spliced to the incoming fibre using the internal splice tray. This system not only provides improved protection to both the electrical and fibre connections which are secured within the case but also allows for quick and easy replacement/repair of any failed SMPTE connectors.
50-2118
NEW CANFORD 4 WAY SMPTE 311 BREAKOUT ENCLOSURE These wall/ceiling mountable enclosures will be manufactured to accept either 2, 4 or 6 incoming SMPTE 311M cables and are designed to enable the respective fibre and electrical core to be broken out to LC (or SC) bulkheads and 6 pin MateN-Lok panel connectors. Similar to our range of rack mountable field termination boxes they offer not only the possibility of a “plug and play� approach but also simplify the process of on-site installation and maintenance. They are particularly useful in installations where depth is an issue as the SMPTE cable can be brought away from the rear of the panel then terminated elsewhere in a safe and secure manner. The enclosures are also provided with a shroud to offer additional protection against accidental damage to the breakout connections. The enclosures come supplied with the required fibre patch cords, electrical crimp contacts and splice protector sleeves to help facilitate easy installation.
PROTOTYPE CANFORD ANGLED 12 WAY OPTICALCON DUO SMPTE FIELD TERMINATION BOX BLACK These 1U rack enclosures will be manufactured to accept either 8 or 12 opticalCON connectors and are designed to facilitate easy on site termination. The range will be fitted with Neutrik NO2-4DW-1A SMPTE DUO connectors and blue singlemode flanges. The electrical contacts on the connectors will be terminated to 6 pin Mate-N-Lok male panel connectors which in turn terminates to a the female bulkhead connector fitted within the enclosure. A 24 way splice tray and 2 cable management spools are also provided within the case. During installation the SMPTE 311M cable is brought into the enclosure and the electrical conductors are fitted with the supplied crimp contacts before being inserted into the female MateN-Lok bulkhead connector. The fibre cores are routed via the cable management spools to the splice tray and spliced to the provided LC patch cords before connecting to the rear of the DUO connector. The enclosure will come supplied with all of the required components to facilitate easy installation. DUBAI Office Contact: Tel +971 50963 1201
|
danny.zacharia@canfordme.com
CANFORD BNC 12G, 4K UHD TERMINATION PANELS USING KORUS BNC CONNECTORS, 75OHM These “Ultra High Definition” flat, angled and very high density BNC termination panels are intended for 12G 4K ultra high definition (2160P60), 3G and 1.5G high definition, standard definition and analogue video applications. The performance exceeds the requirements of SMPTE ST 2082-1 making them suitable for composite and component video, 270 Mb/s SDI, uncompressed 1080i or 1080p HD-SDI video and 4K UHD (2160P60) video up to 12GHz. Mating
Connectors 4K cable connectors and patchcords are available.
Code
Description
48-4073
CANFORD 4K BNC TERMINATION PANEL 1U, 1x20, 12G, black
48-4163
CANFORD 4K BNC TERMINATION PANEL Angled 2U, 2x20, 12G, grey
48-4173
CANFORD 4K BNC TERMINATION PANEL High density 1U, 2x24, 12G, grey
NEW CANFORD MICRO BNC TERMINATION PANELS 12G, 4K UHD, 75 ohms – Very High density With two rows of connectors in 1U panels, each row with 16, 20, 24, 32 or 48 connectors, depending on model, these ‘Ultra High Definition’ Micro BNC termination panels are intended for 12G 4K ultra high definition, 3G and 1.5G high definition, standard definition and analogue video applications. The performance exceeds the requirements of SMPTE ST 2082-1 making them suitable for composite and component video, 270 Mb/s SDI, uncompressed 1080i or 1080p HD-SDI video and 4K UHD video up to 12G. Manufactured from a lightweight, but extremely rigid, aluminium extrusion, panels are fully-populated with up to 48 pairs of Connectors ‘Ultra High Definition’, 12G, 75 ohm isolated Micro BNC adapters, equally spaced across the panel. Due to the high connector-density only a single lacing-bar is fitted to the rear of the panel. On the front, above and below each row of connectors, sits a designation-strip holder with snap-on cover, allowing paper inserts, with 7.5mm of printable height, to be inserted before or after any installation.
NEW CANFORD DIN 1.0/2.3 TERMINATION PANELS 3G HD-SDI, 75 ohms – Very High density With two rows of connectors in 1U panels, each row with 16, 20, 24, 32 or 48 connectors, depending on model, these 3G HD-SDI termination panels are intended for 3G and 1.5G high definition, standard definition and analogue video applications. This redesign of the original DIN style connector, using precision components impedance matched to 75 ohms, make it suitable for 3G HD-SDI and frequencies up to 3GHz. Manufactured from a lightweight, but extremely rigid, aluminium extrusion, panels are fully-populated with up to 48 pairs of Connectors 3G, 75 ohm isolated DIN 1.0/2.3 adapters, equally spaced across the panel. Due to the high connector-density only a single lacingbar is fitted to the rear of the panel. On the front, above and below each row of connectors, sits a designation-strip holder with snap-on cover, allowing paper inserts, with 7.5mm of printable height, to be inserted before or after any installation.
International Sales: Tel +44 (0)191 418 1133
|
international@canford.co.uk
|
www.canford.co.uk
CANFORD XLR TERMINATION PANELS Standard Layouts A range of audio termination panels supplied fully populated with Neutrik ‘D’ series XLR connectors. Nine combinations of 3-pin XLR male and latching female connectors are available as standard, all have nickel-plated shells and silver-plated contacts and are mounted from the rear of the panel.
Custom Layouts
45-3320
Custom ‘D’ Series connector-combinations can be assembled to special order and may include any other ‘D’ Series mounting connector. We will require an email, drawing or sketch to allow us to understand your exact requirement prior to quotation.
Angled Angled termination panels, supplied fully populated with Neutrik ‘D’ series XLR connectors. Three combinations of 3-pin XLR male and latching female connectors are available as standard, all have nickel-plated shells and silver-plated contacts and are mounted from the rear of the panel.
45-3318 Angled
CANFORD F-TYPE TERMINATION PANELS A range of termination panels supplied fully-populated with double-sided F-type female connectors. Typically used for RF distribution, CATV and CCTV. Two types are available as standard to suit different earthing requirements. Standard types have connectors fitted directly into the panel so are nominally insulated from the panel by the powder coating, but they cannot be classed as either insulated or earthed. The fully-earthed types have an exposed metal area on the rear of the panel under each star washer and mounting nut, giving a guaranteed earth connection between each connector and the panel. They are also fitted with an earthing stud for common connection to a technical earthing point. Connectors fitted with fully insulating washers may also be supplied to special order.
48-4040
CANFORD TAILBOARD PANEL These 19 inch, rack-mounting, panels are designed to support camera, video and audio connectors on the tailboard of outside broadcast vehicles, in studio or stadia wall-boxes, or in ‘fly away’ racks or flight-cases.
Angled Panels
47-8583 Angled
These versions are manufactured from a unique ‘Z’ profile aluminium-extrusion, which present the connector axis at a 23.5 degree downward angle.This angle relieves strain on the cable connector termination and eases mating during rigging.
CANFORD Tailgate and Wallbox Panels Audio, Triax SMPTE, Ccz-A and Fibre 47-9108 Flat
Flat Panels Flush or flat versions have a horizontal connector mating axis.
DUBAI Office Contact: Tel +971 50963 1201
|
danny.zacharia@canfordme.com
CANFORD MUSA 3G HD-SDI PATCH PANELS The Canford MUSA is optimised for 3G HD-SDI and exceed the requirements of SMPTE292M and SMPTE424M. Extremely cost effective, no moving parts or springs, closed entry connectors and the non-normalled, U-link concept offer excellent reliability and make them ideal for OB and fly-away harsh environments and studio applications. Canford MUSA panels are offered in a variety of connector configuration including a very high density 1U, 32-way version.
Code
Order U-Links separately for example 48-4410
Description
48-4318
CANFORD MUSA 3G HD PATCH PANEL 1U 2x24 MUSA 3G HD, grey
48-4320
CANFORD MUSA 3G HD PATCH PANEL 1U 2x26 MUSA 3G HD, grey
48-4349
CANFORD MUSA 3G HD PATCH PANEL 2U 2x24 MUSA 3G HD, black
48-4353
CANFORD MUSA 3G HD PATCH PANEL 3U 4x24 MUSA 3G HD, black
48-4381
CANFORD MUSA 3G HD PATCH PANEL 1U 2x32 MUSA 3G HD, grey
48-4382
CANFORD MUSA 3G HD PATCH PANEL 1U 2x32 MUSA 3G HD, dark grey
CANFORD MUSA HD 3GB/S 1080P PATCHCORDS These are suitable for 3Gb/s 1080p HDTV, 1.5Gb/s 1080i HDTV, SDTV, Analogue and Unbalanced 75ohm AES Audio and use Canford’s SDV-F flexible, low-loss digital video cable. Connector body parts are nickel-plated and centre contacts are gold plated giving a smooth mating action and overcoming the ‘sticktion’ and tarnishing of the now obsolete silver MUSA. They are completely compatible with all MUSA jackfields, including older analogue types (silver-plated connectors). MUSA HD-BNC HD patchcords have a MUSA HD at one end and a Neutrik rear twist BNC HD at the other.
45-5119 CANFORD MUSA 3G HD-BNC HD PATCHCORD Neutrik rear-twist
45-5006 CANFORD MUSA 3G HD PATCHCORD
CANFORD B-GAUGE HIGH DENSITY JACKFIELDS Broadcast style Constructed from a rigid 1U aluminium extrusion with dawn grey, dark grey or black powder coated finish, these two-row jackfields allow a consistent ‘Broadcast style’ finish to patching and termination panel areas within an installation.
45-3216
CANFORD BANTAM JACKFIELD The Neutrik bantam jacks are set at ‘stereo-pitch’ (paired) or ‘mono-pitch’ (equally spaced) in two rows of 48 in a 1U panel. They are arranged in continuous rows of 48, two groups of 24 or six groups of 8 to aid channel identification. Jacks are 5-point, palladium-contact type with a heavy duty nickelplated frame and front ring to ensure a long and reliable operational life.
International Sales: Tel +44 (0)191 418 1133
|
45-3281 Broadcast style
international@canford.co.uk
|
www.canford.co.uk
CANFORD 1U UNIVERSAL KEYSTONE PANELS ‘Total flexible solution’ 1U, 19”, 24 way keystone panel available in Grey or Black. Interchangeable keystone modules available in CAT6, CAT6A, CAT5E, SC Fibre, LC Fibre, ST Fibre, HDMI, USB2, USB3, RJ11 / 12, BNC 50Ohm, 75Ohm & HD, F Type, 3.5mm Jack also Feedthrough modules available in CAT6, CAT6A & CAT5E, panels also available in 8 & 16 way.
ADAPTORS ‘D’ cut out / Keystone ‘D’ cut out / keystone adaptor gives the ability to use keystone modules with ‘Canford Universal’ ‘D’ cut out panels available in 1U - 8way, 12way, 16way, 2U - 32way and 3U - 48 way, three colour - Grey, Dark Grey & Black.
Code Grey 44-3791 44-3793
Black 44-3792 44-3794
44-3795
44-3796
Grey 45-3355 45-3365 45-3390 45-3392 45-3394
Code Dark Grey 45-3356 45-3366 45-3387 45-3398 45-3389
Panels Options 1U, 1x 24 1U, 1x16 1U, 1x8
Black 45-3357 45-3367 45-3391 45-3393 45-3395
Panels Options 1U, 1x8 1U, 1x12 1U, 1x16 2U, 2x16 3U, 3x16
Keystone modules available in CAT6, CAT6A, CAT5E, SC Fibre, LC Fibre, ST Fibre, HDMI, USB2, USB3, RJ11 / 12, BNC 50Ohm, 75Ohm & HD, F Type, 3.5mm Jack, also Feedthrough modules available in CAT6, CAT6A & CAT5E.
CANFORD CAT5E, CAT6 AND CAT6A RJ45 FEEDTHROUGH PRO PATCH PANELS Unscreened Supplied fully populated with feed-through (also known as double-sided or back-to-back) unscreened RJ45 CAT5E sockets enabling system patching and easy connection of portable or external equipment. A printable designation-strip with snap on cover and a lacing bar are fitted as standard. Feedthrough modules available in CAT6, CAT6A & CAT5E, panels also available in 8 & 16 way.
45-3428
Screened Supplied fully populated with feed-through (also known as double-sided or back-to-back) screened RJ45 CAT6A sockets enabling system patching and easy connection of portable or external equipment. A printable designationstrip with snap-on cover and a lacing-bar are fitted as standard.
DUBAI Office Contact: Tel +971 50963 1201
|
danny.zacharia@canfordme.com
45-3425
455 SERIES IP55 Sealed Outdoor Cabinets (covered areas) A range of IP55 weather-proof wall mounting cabinets available in 7, 9, 12, 16, 20 and 26U heights and 450mm and 600mm depths. These are ideally suited to stadium, theatres and warehouses which are exposed to dust and damp conditions.
• Fully welded mono-block construction • Sloping roof canopy • Gasket sealed steel door • 3-point locking mechanism • Protection against dust, rain, sleet and snow • Optional plinths, fans and heaters • Load Capacity: 100kgs
15-1901
466 SERIES IP66 Wall Outdoor Cabinets Designed for use in outdoor open areas subject to the full force of the elements or harsh internal environments such as chemical plants or marine applications. Manufactured to offer sealing to IP66, the 466 series are available in three heights, two widths, three depths and three finishes. All units have a full steel, lockable front door offering both 130 degree opening and left or right operation. Rack profiles are recessed 50mm or 100mm from the front depending on the model. Cable access is available on the base of the cabinets and these are supplied complete with one cover plate and polyethylene gasket to maintain IP66 sealing.
• Rated to IP66 against water and dust ingress • Fully welded construction for strength and rigidity • Fully sealed and lockable steel door • Full and half rack versions available
LIGHT GREY, RAL 7035 15-3071
STANDARD GRADE 304L 15-3092 MARINE GRADE 316L 15-3111
PANAMIC HAND CRAFTED CARBON FIBRE BOOM POLES
Panamic p o l e s
a p a r t
Panamic Boom Poles are made from the highest quality carbon fibre making them extremely lightweight with superb balance. Panamic Booms incorporate wear resistant nylon web handles and unique adjustable end stops which guarantee silent operation and significantly extend the working life of the boom.
• S ilent operating Nylon Bushes & Precision Locking Rings help prevent jamming,
53-5801
sticking or binding and provide great resistance from dirt ingress
• Each section houses an Adjustable End Stop enabling quick adjustment and keeps each section tight, eliminates the risk of rattle noise from loose sections
• S trong, lightweight Carbon Fibre construction reduces bend and ensures precision positioning • T ough corrosion resistant Titanium Tip is approximately 1/3 of the weight of an equivalent Stainless Steel Tip
VIDEO
• Durable and wear resistant Nylon Web Handle. The Rubber End Cap protects the carbon handle section from impact with the ground
International Sales: Tel +44 (0)191 418 1133
|
Subscribe to our YouTube channel
international@canford.co.uk
|
www.canford.co.uk
CAT5E-F-J CATEGORY 5E DATA CABLE Stranded conductor, screened - Multi-circuit, studio and touring grades Multi-circuit deployable Cat5E cables, for both studio and touring/OB applications, based on Canford’s CAT5E-F screened flexible cable. The ‘Touring’ version uses the standard CAT5E-F 6.2mm diameter flexible cable, with colour coded and numbered individual jackets. The overall jacket has a tough layer of PUR (polyurethane) for abrasion resistance. Canford uses PUR on many cable designs to provide excellent wearing characteristics in the harsher environment of outside broadcast and touring applications.
31-884
The ‘Studio’ version has a design optimised to give the best possible flexibility, and uses the CAT5E-F-M 5.8mm diameter cable, with silver coloured and numbered jackets. The overall jacket is soft PVC for optimum flexibility. It is suitable for use with both standard RJ45 connectors (round entry version), the Neutrik etherCON and most other ruggedised RJ45 designs, or any other connector with a suitably sized entry gland.
31-894
CANFORD CAT5E-F CATEGORY 5E DATA CABLE Stranded conductor, screened - Deployable Increasing use of network and data cables between audio and video devices on location calls for a Category 5E cable that is designed specifically for deployable use. Basic Category 5E F/UTP is a relatively inflexible installation cable, and even the slightly more flexible patchcord type still has very poor handling characteristics. This Category 5E cable has been designed specifically for the professional audio and video user, and is intended to handle like a typical microphone cable. It has an extra-flexible four-pair core structure, that maintains Category 5E performance, a foil screen, then a special soft PVC composite material outer jacket, to give superb flexibility and handling characteristics. Code
Description
31-850
CANFORD CAT5E-F CABLE BLACK
31-852
CANFORD CAT5E-F CABLE RED
31-855
CANFORD CAT5E-F CABLE GREEN
31-856
CANFORD CAT5E-F CABLE BLUE
31-859
CANFORD CAT5E-F CABLE METALLIC SILVER
It is available in a variety of colours, plus a special “metallic silver” (non-conducting!) Version specifically for “high tech” in-vision applications. It is suitable for use with both standard RJ45 connectors (round entry version), the Neutrik etherCON and most other ruggedised RJ45 designs, or any other connector with a suitably sized entry gland. The cable is also suitable for DMX512 applications.
CANFORD CAT5E-F-M CATEGORY 5E DATA CABLE Stranded conductor - Miniature, Flexible A reduced size version of Canford CAT5E-F, designed specifically for installations where a very flexible screened Category 5E cable is required. The core construction and jacket material is identical to CAT5E-F; the difference is only in the jacket thickness. Because of the reduced jacket wall thickness, this cable is not recommended for deployable applications. Ideal solution for internal rack wiring.
DUBAI Office Contact: Tel +971 50963 1201
|
danny.zacharia@canfordme.com
31-860
CANFORD CAT 6 F DEPLOYABLE - Data Stranded Conductor UTP Cable Increasing use of network and data cables between audio and video devices on location calls for a Category 6 cable that is designed specifically for deployable use. Basic Category 6 UTP is a relatively inflexible installation cable, and even the slightly more flexible patchcord type still 31-870 has very poor handling characteristics in deployed (as opposed to patching) applications. This Category 6 cable has been designed specifically for the professional audio and video user, and is intended to handle like a typical microphone cable. It has an extra-flexible four-pair core structure that maintains Category 6 performance, then a special soft PVC composite material outer jacket, to give superb flexibility and handling characteristics.
NEW January 2018 CANFORD CAT7-F DEPLOYABLE A polyurethane jacketed, rugged, Cat7 cable specifically designed for multimedia applications.
31-840
CAT6 SHIELDED - Solid Conductor DRAKA Category 6 U/FTP 4 twisted pair solid conductor cable, patented foil wrapping of two pairs 1 & 2, 3 & 4, Low Fire Hazard jacket (LSHF). Also available as a Category 6 S/FTP 4 twisted pair solid conductor cable, patented foil wrapping of two pairs 1 & 2, 3 & 4, with overall Braid, Low Fire Hazard jacket (LSHF).
31-936 U/FTP, LFH Jacket (Blue)
31-928 S/FTP, LFH Jacket (Blue)
CANFORD FST-DMX-LFH - Foil Screened Stranded Conductor Twin Cable For Dmx512 Data - Low Fire Hazard Foil screened, 120 ohm, single-pair installation cable, specifically for DMX512 lighting-control applications, designed to meet RS485 data cable specification. Wire insulation is polypropylene, which shrinks back minimally during soldering (considerably less than PVC or polyethylene). The overall jacket is bonded to the screen tape so that one stripping action removes jacket and screen, leaving the signal wires and earth wire free for further processing. Wiring specifications for many public buildings call for LFH cables to be used in certain areas, notably in corridors etc. Under combustion circumstances, LFH cables have a 31-052 significantly reduced smoke emission, and the gaseous products contain no toxic halogens.
CANFORD FST-LFH - Foil Screened Stranded Conductor Twin Cable - Low Fire Hazard This D’n’A series (Digital and Analogue) cable is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be suitable for AES/EBU digital audio as well as analogue microphone and line level signals. Wire insulation is polypropylene, which shrinks back minimally during soldering (considerably less than PVC or polyethylene). Wiring specifications for many public buildings now call for LFH cables to be used in certain areas, notably in corridors etc. Under combustion circumstances, LFH cables have a significantly reduced smoke emission, and the gaseous products contain no toxic halogens. 31-059 International Sales: Tel +44 (0)191 418 1133
|
international@canford.co.uk
|
www.canford.co.uk
NEW CANFORD MDU 15 LOCKING IEC For Outside Broadcast,Touring and Fly Away Kits Designed and manufactured by Canford, MDU15 is intended for applications prone to vibration or where equipment is regularly re-positioned, such as outside broadcast, touring, hire and fly-away systems. Canford MDU15 features 12x universal Locking IEC outlets to protect against unintentional power disconnection.
• 1x 10 amp IEC inlet • 12x Universal IEC-Lock outlets • Individually fused outputs with status LEDs
42-8352
VIDEO Subscribe to our YouTube channel
CANFORD TWIN INPUT MDU • 1U 19” Twin input 2 x 7 (14 total) Fused IEC Outlets, independent feeds (provides assurance that should power fail 50% of MD will continue)
• Bi-Colour LEDs indicate fuse Ok or Fuse Fail
Code
Description
42-8311 thru 42-8318
TWIN INPUT IEC
42-8321 thru 42-8328
TWIN INPUT POWERCON
(allows quick visual check of potential power failure)
• Un-switched with 2 x Red or Green LED power indication Options
• IEC Input, Powercon Input or with 3m Hardwired Cable Input • Switched with 2 x Red or Green illuminated two pole switch • Available in Black or Grey
CANFORD ECONOMY MDU
NEW IMPROVED PRICING
• 1U 19” MDU 15 x fused IEC outlets • Bi-Colour LEDs indicate fuse Ok or Fuse Fail • Robust all steel case - Black • Un-switched with Red or Green LED
Code
Description
42-9112 thru 42-9116
CANFORD ECONOMY IEC
42-9122 thru 42-9128
CANFORD ECONOMY POWERCON
power indication
• Available Ex-stock Options
• IEC or Powercon ‘In with Loop out • Switched with Red or Green illuminated two pole switch
DUBAI Office Contact: Tel +971 50963 1201
|
danny.zacharia@canfordme.com
NEW IP ADDRESSABLE PDU iPLite monitors multiple PDU’s from a single IP address, includes Free SNMP software, allows email alerts to be sent, alerts on all parameters, plus also allows monitoring of temperature and humidity thresholds. Easily configured which means set up to be completed in minutes, display fitted to allow local monitoring or remotely monitor via Free SNMP software, iPLite communicates via HTML, HTTPs, SNMP and XML via inbuilt WEB Browser.
42-6105
CANFORD CONNECTOR PLATES The VGA connector is stock code 44-102 BTX CD-SLIM15F D-sub HD 15 pin female, panel mount with screw wire terminals. The 3.5mm jack is stock code 43-259 Miniature jack socket 3.5mm 3-pole, nickel plated body with gold plated contacts. The HDMI connection is via a 155mm length moulded cable assembly, with female panelmount and free female connectors, high speed with Ethernet. This allows the use of standard deep mounting boxes with inline connection of the installed HDMI cable horizontally in the box or ducting. Note that 35mm minimum depth is required behind the faceplate. 49-631
Plates are manufactured from 1.5mm steel and finished in a hardwearing black or white powder coating.
Other connector combinations including USB, HDMI or DVI with screw terminals and RJ45 types are available to special order.
NEW AV CONNECTOR PLATES EU/UK Connector plates fitted with a range of HDMI, VGA, Audio, Network and Power connections suitable for standard 1, 2 and 3-gang EU/UK flush-mounting electrical boxes. Plates are manufactured from 1.5mm steel and are available in various standard finishes/colours. Custom colours and engraving are also available to special order. (Minimum order quantities will usually apply to custom metalwork.)
CANFORD CUSTOM PANELS Utilising in-house machining centres, we are able to offer a very fast turnaround custom panel service. Applications include studio wallbox access points, vehicle tailboards, multi-format post production suites, multimedia-rack patching or presentation-suite feeds where non-standard connector combinations are required. Panels are usually painted Dawn Grey (BS4800-10A03) or Black but other finishes, engraving and screen printing may be specified, although a minimum quantity or charge may apply. A drawing, preferably in AutoCAD format, will be required giving precise connector mounting-hole centres.
International Sales: Tel +44 (0)191 418 1133
|
international@canford.co.uk
|
www.canford.co.uk
57-4917
RDL EZ SERIES MICROPHONE PRE-AMPLIFIERS These provide balanced microphone inputs with XLR connectors to connect to systems which have only line level inputs, such as recorders or computer sound cards. They are suitable for use with both dynamic and condenser microphones, having 24V phantom power available. Gain controls, switched compression and level indication are provided. Single and dual channel models are offered. A range of mounting accessories is available for the Radio Design Labs EZ-Series. The EZ-Series offers a wide range of stand-alone designs including distribution amplifiers for line level audio, headphones, composite and XGA/XGA video, audio pre-power and mixer amplifiers, AV input selectors and computer video selectors. All models may be connected and operated without the use of tools, using standard cables. They are housed in enclosures with the same height, with widths in increments of one sixth of a rack-width, so they may be mounted singly or in multiples in a range of accessory mounts. Audio and video are switched using solid-state circuitry to avoid degradation due to dirty switches; critical connectors are gold-plated for reliable connections. All use 24 volt power, supplied from external AC adapters.
RDL TX SERIES BALANCED - UNBALANCED CONVERTERS - Transformer These modules are intended to interface consumer audio equipment with professional balanced-line circuits, providing galvanic isolation in addition by the use of transformers, to avoid ground-loops and thus reducing hum. 57-2402
RDL HUM KILLER AUDIO ISOLATION TRANSFORMERS
57-451
These designs provide ground-Isolation in balanced and unbalanced line-level systems to remove ground or earth-loops, thus removing the main cause of hum. Suitable for portable use or permanent installation they are built in rugged metal cases and are supplied with mounting brackets. Both mono, balanced and stereo, unbalanced, transformer-isolated types are offered.
RDL RACK-UP DANTE NETWORK INTERFACES - Terminal block - Output
57-4805
These modules interface standard line-level audio signals with a DANTE audio network, providing ‘flexibility, economy and simplicity’ to DANTE networked audio systems. Built in RDL’s ‘Rack-Up’ packaging, they will mount directly to surfaces or using a range of mounting options. Each provides line-level outputs from two or four DANTE network audio channels. They are offered with or without a POE (power over Ethernet) facility. DANTE is a software and hardware solution, offering high-performance audio distribution over standard IP networks, supporting hundreds of simultaneous channels of uncompressed audio with low latency and accurate synchronization.
DUBAI Office Contact: Tel +971 50963 1201
|
danny.zacharia@canfordme.com
EMO POWER DISTRIBUTION SYSTEM A range of power distribution panels for 19” rack mounting. Suitable for both fixed and mobile installations. The system allows all rack mounted equipment to be fitted with a standard BS1363 13A, IEC 10 amp or Schuko connector, so that installation and removal of equipment is easy and safe. The availability of front mounted sockets allows standard connectors also to be used on portable external equipment. In installations where a large number of outlets are required, the initial unit can supply power to slave units through the outlets on its rear panel. If a detachable power input lead is required, the C600 series panels offer this facility via BS EN 60309-2:1922 connectors (formerly known as BS4343, or IEC309 connectors!).
by Ca n f o rd
42-630 E630
42-683 C601 / 41-686 C604
EMO AC MAINS POWER SWITCHING SYSTEM CM6 Master Station
42-661 CM6
This has a six-digit keypad and two, sequenced, mains outlets - a ten amp feed for the audio mixer and ancillary equipment and a 32 amp feed for the first bank of amplifiers. On entry of the correct security code, the 10A feed is switched on, followed by the 32A feed. If a number of high-power amplifiers are to be switched on, the number of 32A feeds can be increased by adding CS6 slaves (one for each additional 32A outlet required) up to a maximum of eight. Including the Master Station, this gives a total of nine 32A and one 10A switched outlets.
42-662 CS6
CS6 Slave Switcher This is triggered by a 12V DC control voltage from a CM6 Master Station. The CM6 supplies separate control voltages to each CS6 slave in sequence. While voltage is present, the slave units will remain switched on. Removing the voltage (during the power down sequence) will cause them to switch off. In the event of the CM6 master losing mains power, the system automatically defaults to ‘Off’.
EMO MICROPHONE SPLITTERS These professional quality microphone splitters are available in two formats, either free-standing or panel mounting. The microphone splitters have three outputs in either format, one direct and two transformer coupled, one of which will pass phantom power to the input. The microphone splitter is fitted with two phase change switches and an earth lift switch; this combination will solve most operational problems. The panel mounting microphone splitter is suitable for permanent installation in OEM equipment, studios, OB vans, mobile sound systems, etc.
20-335
EMO RACK LIGHT Constructed to occupy only 1U of rack space, the EMO Rack Light will illuminate the front panels of equipment housed below without diffusing into the surrounding area. The case slides in and out on runners and works on the ‘fridge door’ principle – the light goes out as the case clicks shut. The frame will stay closed even if the rack tips forward; when opened it will stay put at the position set. The EMO Rack Light incorporates 12 volt festoon lamps which are readily available throughout the world. Two levels of illumination can be selected.
International Sales: Tel +44 (0)191 418 1133
|
international@canford.co.uk
|
www.canford.co.uk
CANFORD CATKIT STAGEBOX SYSTEM This range of robust stage boxes, patch boxes and super-flexible, rugged, multicore cables is 49-881 designed to withstand the rigours of life on the road. Available in four-way or eight-way configurations with standard RJ45-compatible etherCON connectors, they offer a solution to deploying multiple Cat5E equivalent cables in demanding environments, including television outside broadcast and live-performance rigs. Stage boxes are fitted with captive multicore cables in various lengths, with etherCON break-out tails, Multicore cables have etherCON break-out tails at each end, patch boxes provide back-to back etherCON connectivity and breakout to standard RJ45 Cat5E patchcords.
CANFORD WALLBOXES - SURFACE MOUNTING, MODULAR
49-783
A series of rugged steel wallboxes offering a vast range of connection possibilities when combined with ‘Universal’ series connectors. A robust, folded chassis forms the basis for the box with a choice of front plates with up to 48 ‘Universal’ cutouts. Front plate ‘Universal’ connector holes are numbered sequentially (e.g. 1-12, 1-16 etc). The back chassis is supplied with a selection of mounting holes and cable access holes in the rear face. Supplied with necessary hardware to assemble box. Finished in Black.
TEN47 TOURLINE MULTIPIN AUDIO CONNECTORS This range of heavy duty, circular, bayonet-lock connectors, inter-mate fully with similar connector series derived from the MIL-C5015 / VG95234 specifications, used widely throughout Europe for both broadcast and live performance audio applications. Male and female cable connectors may be joined in-line, offer IP67 protection against dust and water when mated, and are available in a range of capacities from 25 pins to 150 pins. Versions with 25, 37, 54, 85 and 150 pole versions are suitable for 8, 12, 16, 24 and 48 channel connections. The housings have a black anodised finish with key-ways which ensure accurate alignment before the contacts mate. Female connectors have female contacts and a locking ring. Male connectors have male contacts and external locking grooves.
47-111
47-141
47-142
47-112
CANFORD FSJ SERIES - Foil Screened Stranded Conductor Individually Jacketed Multipair Cable This D’n’A series (Digital and Analogue) cable is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be suitable for AES/EBU digital audio as well as analogue microphone and line level signals. Wire insulation is polypropylene, which shrinks back minimally during soldering (considerably less than PVC or polyethylene). It is an individually jacketed multipair cable based on Canford’s FST-F ‘Flexible Foil Screened Twin’ in order to offer enhanced flexibility.
DUBAI Office Contact: Tel +971 50963 1201
|
Code
Description
31-502
CANFORD FSJ CABLE 2 PAIR
31-504
CANFORD FSJ CABLE 4 PAIR
31-508
CANFORD FSJ CABLE 8 PAIR
31-512
CANFORD FSJ CABLE 12 PAIR
danny.zacharia@canfordme.com
PROTOTYPE CANFORD HINGED SWING FRAME Designed and develop following feedback from our touring customers, a 19” swing frame available in 6U – 18U, retro fits in to a standard 19” Flight case or Rack, with hinges on one side and slam locks on the other, this allows for easy access to the rear of panels and cables, especially beneficial when there is limited access to the rear of the fight case. For further details contact Danny.
NEW ENGRAVING BY CANFORD Following substantial investment in the latest Trotec Laser Engraving machine incorporating both CO2 and Fibre technology Canford are now able to offer an in-house custom engraving service. With a working area of 1000 x 610mm and the capability to mark a wide variety of metals and finishes with very fine detailing we can achieve not only basic labelling but also intricate customer logos and designs. * BESPOKE SOLUTIONS
PELTOR EAR-DEFENDING HEADSETS Ear defending headsets, of particular use to those who have to communicate in environments with high background noise levels, for example camera crew at football grounds and other events with high ambient noise levels. Peltor has a long-established reputation for a wide range of ear-defending products, including some models aimed specifically at the broadcast user.
MT7H79A The H79 headphones have been in use in high ambient noise environments for many years and have an established reputation for effectiveness and comfort during extended use. They comprise two high-attenuation earcups with soft foam- and fluid-filled sealing rings with built-in pressure-evening channels for effective sealing. This model uses the type A headband, which is padded stainlesssteel spring design. The MT7 noise-cancelling microphone is fitted on an easily adjustable boom, which may be unplugged from the cup for easy replacement.
Code
Description
54-380
PELTOR MT7H79A HEADSET EAR DEFENDING, STEREO, UNTERMINATED
54-382
PELTOR MT7H79A HEADSET EAR DEFENDING, WITH 4 PIN FEMALE XLR
MT7H79/61A This is a special ‘hybrid’ design featuring one H79 cup to give maximum attenuation, and one slim H61 cup to allow the user greater proximity to the camera. This model uses the type A headband, which is padded stainless-steel spring design. The MT7 noise-cancelling microphone is fitted on an easily adjustable boom, which may be unplugged from the cup for easy replacement. 54-3881
International Sales: Tel +44 (0)191 418 1133
|
international@canford.co.uk
|
www.canford.co.uk
COMPLETE WIRED INTERCOM SOLUTIONS
tecpro by Canford
Simple and intuitive to operate, Tecpro intercom enables a group of people to have a simultaneous, two way conversation in real time with excellent intelligibility. The size of the group can vary between 2 and 80+ people and they can communicate on up to four independent intercom groups.
27-352 TECPRO LS352 Loudspeaker station, dual circuit, desktop
27-210 TECPRO SMH210 Single muff headset
27-741 TECPRO MS741 Master station, 1U
27-511 TECPRO BP511 Single circuit beltpack
NEW GREEN-GO DIGITAL INTERCOM OVER ETHERNET Green-GO digital intercom differs fundamentally from other designs by having no central matrix or base station. This results in a substantial cost saving and eliminates a potential catastrophic single point of failure. To replace the matrix, all Green-GO devices hold in memory the complete system configuration and settings.
• Massive system potential - 250 Groups and 3,000 Users! • Each device can store any 32 of the Groups and Users - see below for definitions • A PoE switch provides power for the system and creates a LAN • Green-GO devices will operate over most existing data networks without slowing or crashing the network
• Other file protocols like DMX and Dante co-existing on the network will be ignored • Some devices can be optionally powered from an external 12V PSU • The GGO-2W 2-Wire interface will provide a robust link to analogue partyline intercom systems including Clear-Com, RTS-TW and Tecpro
• Combine the new DECT wireless system with a 2-Wire interface to add high quality, full duplex wireless comms to an existing partyline intercom
• Audio quality is high and latency is low - no lipsync problems!
Canford Audio PLC: Office No. 01, Fast Line Business Center, 2nd Floor, Al Garhoud Building Sheikh Rashid Road, Al Garhoud, Dubai, UAE