CANFORD
FIBRE AND AV SOLUTIONS FOR THE MARINE AND OFFSHORE INDUSTRY canford.co.uk
CANFORD
CANFORD AUDIO PLC – WHO ARE WE?
tecpro
Tecpro Communication System is a wellknown product in the Subsea, Oil & Gas by Canford industry but Canford Audio may not be so familiar. Canford Audio are the manufacturers of Tecpro, and have a pedigree in pro Audio and Broadcast. Iain Elliott, our founder, is still on the Board and we are celebrating our 40th Anniversary this year. In addition to supplying some of the world’s leading audio brands SENNHEISER, SHURE, Audio Technica and NEUTRIK, to name a few, we also manufacture 40% of the products we supply from our two UK manufacturing sites in Washington (Tyne & Wear) and Portland (Dorset) providing bespoke customer solutions to meet your specific applications.
During 2015 and continuing in 2016 we are also seeing an increasing demand for Fibre systems, where higher speeds and greater bandwidth are required. Our investments for 2016 include a Fibre Termination facility to enable fast, efficient terminations to support you with your ongoing applications. We are also launching Green-Go a digital intercom system over a standard Ethernet network, which operates without a central matrix eliminating the possibility of a catastrophic single component failure. In the event of a problem, a faulty device can be easily removed and its replacement can clone all system configurations from a neighbouring device on introduction to the network. I would like to take this opportunity to thank you for your business in 2015 and we look forward to supporting our customers throughout 2016 and beyond.
We offer same day despatch and next day delivery on all stocked items and stock levels can now be viewed online. Once logged into our system your special pricing can be viewed and products can be ordered fast and efficiently.
Chas Luchford, Sales Director
CABLE ASSEMBLY CELL RAPID-RESPONSE CAPABILITIES FOR CABLE PRODUCTION The Canford Cable cell was introduced to enable us to cope with a growing demand for bespoke cables. Offering our customers a much more cost effective cable supply and provide a speedier response to urgent cable requests. Both custom and standard cable assemblies are quickly produced, reducing customer waiting times. Depending on cable type, cable assemblies can now be produced, packed and ready for same day despatch*
Component and Cable Storage
Test Area
Packing Area
Operational Area: Assembly benches equipped with tooling required to produce cables. * Same day despatch when you order before 12pm. Subject to stock holding of non-standard cables and connectors. Appropriate lead time required for large project orders. A standard £8.00 delivery charge will be applied to all orders below £100.00, otherwise carriage is free.
Contact:
Cable Cutting Area: Cable cutter machine and pre-feeder measure the exact length of cable into the coiling machine.
Gravity Fed Conveyor Belt: Two tier with opposite gradients, to send work to operators, then back to test.
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
www.canford.co.uk
MAINS POWER DISTRIBUTION UNITS CANFORD ECONOMY MDU • 1U 19” MDU 15 x fused IEC outlets • Bi-Colour LEDs indicate fuse Ok or Fuse Fail • Robust all steel case - Black • Un-switched with Red or Green LED power indication • Available Ex-stock Options
• IEC or Powercon In with Loop out • S witched with Red or Green illuminated two pole switch
Part No
Description
42-9112 thru 42-9116
Canford Economy IEC
42-9122 thru 42-9128
Canford Economy Powercon
CANFORD TWIN INPUT MDU • 1 U 19” Twin input 2 x 7 (14 total) Fused IEC Outlets, independent feeds (provides assurance that should power fail 50% of MD will continue)
• B i-Colour LEDs indicate fuse Ok or Fuse Fail (allows quick visual check of potential power failure) •U n-switched with 2 x Red or Green LED power indication Options
• I EC Input, Powercon Input or with 3m Hardwired Cable Input
• S witched with 2 x Red or Green illuminated two pole switch
• Available in Black or Grey Part No
Description
42-8311 thru 42-8318
Twin input IEC
42-8321 thru 42-8328
Twin input Powercon
CANFORD MDU AC Professional 12 or 14-way panels, rated at 10, 20 or 32 amps, housed in a compact 1U rackmount case. A variety of inlet and outlet connectors are combined with outlet switches, front-panel mounted fuses, sequential switch-on & switch-off and filter options. The range now has well over 300 variations. Part No 42-9351
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| www.canford.co.uk
CANFORD
FIBRE
CANFORD OPTICALCON BREAKOUT BOXES Where multi-way fibre cables fitted with Neutrik Opticalcon Dual or Opticalcon Quad connectors are used to provide a point-to-point link, these break-out boxes split the two or four channels to a variety of other formats including Duplex LC, SC and ST connectors, depending on the model. The connectors are mounted in a rugged, extruded enclosure, suitable for use in broadcasting and live-event environments. Both multi-mode and single-mode types are offered. Alternative configurations such as mixed LC, SC and ST connections can also be accommodated. Custom options can assembled subject to quotation. Part No 50-0301 and 50-0302
CANFORD FIBRE PATCH CABLES Multimode and singlemode duplex patchcords are available terminated in combinations of ST, SC and LC connectors. Part No 50-0511 LC-LC MM DUPLEX OM3 50/125 Fibre patch cable
Part No 46-4436 SC-SC MM DUPLEX OM3 50/125 Fibre patch cable
Part No 46-4497 ST-ST SM DUPLEX OS1 9/125 Fibre patch cable
CANFORD ST FIBRE TERMINATION PANELS AND RACKCASES Fibre patch-panels supplied fully-populated with industry-approved SENKO ST fibre through-couplers. They feature zirconia (SM) or phosphor bronze (MM) ferrules and tight-tolerance housings to ensure exceptionally accurate connector alignment and fibre face-contact, resulting in lower loss and greater reliability than commercial-grade types. Available in 24, 20 & 16 way. The robust panel design features a rigid aluminium extrusion and a cranked lacing-bar, giving support to rear patchcords or bulk fibres and giving easy access to the rear sockets. Part No 46-3514 46-3516
Description
Code
FIBRE TERMINATION PANEL 1U 1x24 ST MM GREY FIBRE TERMINATION PANEL 1U 1x24 ST MM BLACK
Part No 46-3749 46-3769 46-3791 46-3814
Contact:
UK Sales: +44 (0)191 418 1122
Description
46-3554 FIBRE TERMINATION PANEL 1U 1x24 ST SM GREY 46-3556 FIBRE TERMINATION PANEL 1U 1x24 ST SM BLACK
Description FIBRE TERMINATION RACKCASE 1U 1X16 ST MM, BLACK FIBRE TERMINATION RACKCASE 1U 2X16 ST MM, BLACK FIBRE TERMINATION RACKCASE 1U 1X20 ST SM, GREY FIBRE TERMINATION RACKCASE 1U 2X24 ST SM, GREY
|
sales@canford.co.uk
|
www.canford.co.uk
CANFORD LC FIBRE TERMINATION PANELS AND RACKCASES - SENKO fibre couplers, MM and SM A range of broadcast-style, fibre termination patch-panels supplied fully-populated with industry-approved SENKO LC fibre through-couplers. They feature zirconia (SM) or phosphor bronze (MM) ferrules and tight-tolerance housings to ensure exceptionally accurate connector alignment and fibre face-contact, resulting in lower loss and greater reliability than commercial-grade types. The SENKO couplers also feature an internal ‘light shutter’ which although not an environmental seal, does offer some protection from large particle ingress and protects against laser spillage from unmated ‘live’ ports. Part No 46-3667 46-3671
Description
Part No
FIBRE TERMINATION PANEL 1U 1x16 LC DUPLEX MM GREY FIBRE TERMINATION PANEL 1U 1x20 LC DUPLEX MM, GREY
46-3676 46-3691
Part No 46-3907 46-3916 46-3931 46-3951
Description FIBRE TERMINATION PANEL 1U 1X24 LC DUPLEX MM, BLACK FIBRE TERMINATION PANEL 1U 1X20 LC DUPLEX SM, GREY
Description FIBRE TERMINATION RACKCASE 1U 1X16 LC DUPLEX MM, GREY FIBRE TERMINATION RACKCASE 1U 1X24 LC DUPLEX MM, BLACK FIBRE TERMINATION RACKCASE 1U 1X20 LC DUPLEX SM, GREY FIBRE TERMINATION RACKCASE 1U 1X20 LC QUAD MM, GREY
CANFORD FIBRE TERMINATION PANELS AND RACKCASES - SENKO fibre couplers, MM and SM A range of broadcast-style, fibre termination patch-panels supplied fully-populated with industry-approved SENKO SC fibre through-couplers. They feature zirconia (SM) or phosphor bronze (MM) ferrules and tight-tolerance housings to ensure exceptionally accurate connector alignment and fibre face-contact, resulting in lower loss and greater reliability than commercial-grade types. The SENKO couplers also feature an internal ‘light shutter’ which although not an environmental seal, does offer some protection from large particle ingress and protects against laser spillage from unmated ‘live’ ports. Part No 46-3587 46-3592
Description
Part No
FIBRE TERMINATION PANEL 1U 1X16 SC SIMPLEX MM, GREY FIBRE TERMINATION PANEL 1U 1X20 SC SIMPLEX MM, DARK GREY
46-3596 46-3596
Part No 46-3907 46-3931 46-3953 46-3968
Description FIBRE TERMINATION PANEL 1U 1X24 SC SIMPLEX MM, BLACK FIBRE TERMINATION PANEL 1U 1X24 SC DUPLEX SM, GREY
Description FIBRE TERMINATION RACKCASE 1U 1X16 LC DUPLEX MM, GREY FIBRE TERMINATION RACKCASE 1U 1X20 LC DUPLEX SM, GREY FIBRE TERMINATION RACKCASE 1U 1X20 LC QUAD MM, BLACK FIBRE TERMINATION RACKCASE 1U 1X16 LC QUAD SM, DARK GREY
A full range of ST, SC & LC patch leads are available
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| www.canford.co.uk
CANFORD
FIBRE
IP68 SEALING FISCHER FIBEROPTIC SERIES Two-fibre or four-fibre versions are offered; suitable for point-to-point audio, data or camera-connection, IP68 rating when mated, the ruggedised connectors can withstand harsh and extreme environments such as studio floors, touring, rental and outside broadcasts. Should the connectors become contaminated, a removable mono-block mate adapter allows the connector to be cleaned easily by rinsing under running water followed by a quick blow dry. Part No 50-0431 Part No 50-0416
NEUTRIK OPTICALCON ADVANCED Fibre Cable Assemblies
Part No 46-4051 NEUTRIK OPTICALCON ADVANCED MTP Cable assembly
Part No 46-4600 NEUTRIK OPTICALCON ADVANCED QUAD Cable assembly
Part No 46-4500 NEUTRIK OPTICALCON ADVANCED DUO Cable assembly
Fibre Testing The Neutrik Fibre Measurement Kit allows the measurement of the signal transmitted through opticalCON or other LC fibre patchcords or devices. Part No 25-961
IP68 SENKO IP-SERIES SENKO IP-Series is an effective and flexible solution LC, SC & MPO connector for harsh environmental applications. IP-LC connector meets IP68 environmental sealing requirements, an ideal choice of harsh broadcast applications. Its bayonet locking system is designed to the IEC 61076-3-106 interface standard, also available in IP-SC & IP-MPO.
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
www.canford.co.uk
SENKO XP FIT PLUS ‘Field Installable Connector’ The SENKO XP Fit Plus, is a pre-polished pre-assembled connector compatible with standard SC and LC Connectors. No epoxy is required as an internal mechanical grip effectively holds the fibre in place and can be installed in under 2 minutes. SC Part No 50-1511
LC Part No 50-1521
SENKO XP FIT PLUS TERMINATION KIT WITH PRECISION FLAT CLEAVER
Part No 50-1526
The installation kit contains everything needed for installation of SC and LC XP Fit Plus connectors. No epoxy, polishing film or other consumables are required. No need for electrical power to complete terminations.
SENKO SMART PROBE Easily connects to Laptops, Smartphones & Tablets. This Smart Probe 2 includes several enhanced hardware features over the existing 1.5 model.
Part No 50-1531 SENKO SCK-VM2000-01 SMART PROBE Wi-Fi FIBRE INSPECTION TOOL
• Improved stronger battery cover • Battery tags easing removal from the case • Upgraded CMOS sensor providing wider field of view • Re-alignment of the on off switch and mini USB port Smart Probe 1.0 versions are still available
SENKO MPO, ST, LC, SC SMART CLEANERS SENKO Smart Cleaners have been specifically designed to allow cleaning of fibre connections that reside in a bulkheads, adapters or faceplates without the need to remove the connector. Simply pushing the cleaner into the bulkhead, adapter or faceplate until the unit ‘clicks’ will clean the face with a ‘twist and wipe’ motion. Both re-usable and disposable alternatives are offered. Part No
Description
50-1501 50-1502 50-1503 50-1504 50-1505 50-1506 50-1507 50-1508
SCK-SS-125 SMART FIBRE CONNECTOR CLEANER Reusable, for 1.25mm ferrules, LC and MU SCK-SS-250 SMART FIBRE CONNECTOR CLEANER Reusable, for 2.5mm ferrules, SC, FC, ST, E2000 SCK-SS-125-R CARTRIDGE For Smart Cleaner, LC, MU, fibre connectors, (pack of 3) SCK-SS-125-R CARTRIDGE For Smart Cleaner, SC, FC, ST, E-2000 fibre connectors, (pack of 3) SCK-SS-M-125 SMART CLEANER MINI FIBRE CONNECTOR CLEANER Disposable, for LC, MU SCK-SS-M-250 SMART CLEANER MINI FIBRE CONNECTOR CLEANER Disposable, for SC, FC, ST, E-2000 SCK-SS-MPO SMART CLEANER MPO FIBRE CONNECTOR CLEANER Disposable, for MPO, MTP SCK-CC-100 SMART CLEANER CASSETTE For PC and APC, LC, MU, SC, FC, ST, E-2000 fibre connectors
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| www.canford.co.uk
CANFORD
HDMI RANGE EXTENDING CABLES
LUSEM OXLINX
OXLINX CABLES offer a considerably more efficient and cost-effective solution for long HDMI cable runs than Cat5E cable with converter box systems.
may include applications where cables must pass through congested and/or small apertures, such as internally wired brackets and mounts. Custom screw-locking micro HDMI-D to HDMI-A adapters are supplied with LHM-P pluggable cables. The active electronics, which convert the electrical signal to optical and back, are housed within the body of the HDMI connectors with minimal effect to the overall size (cross section of 19.6mm x 11.2mm).
They are intended for commercial AV and Broadcast installations where longer cable run lengths than those obtainable with standard copper HDMI cables are required. Applications may include professional AV systems interconnection, digital signage (DOOH) and kiosks, plus home theatre systems in larger properties.
Unlike many other HDMI range extending products, no external power supplies are required. OxLinx cables are powered via the HDMI sockets of the connected device and power consumption is low @ 0.5W.
EMI and RFI immunity makes them also useful where the cable needs to pass through environments with high electrical interference.
All cables have a dual rated jacket which conforms to both LSOH (low smoke zero halogen) and CMP-OF (UL Plenum) standards for use in public buildings.
OxLinx cables are HDMI 1.4 compliant and compatible with video resolutions up to and including 4K @ 30Hz, 1080p @ 60Hz Full HD deep colour 48bit, 3D and multi-channel embedded audio to include PCM 8 channel, Dolby Digital True HD and DTS-HD Master Audio.
Contractor friendly, the cable diameter is only 3.4mm and comprises four optical fibres for the video and audio signals, six copper wires for HDMI control signaling and CEC functions. Kevlar reinforcement gives a pulling strength of 500N (50kg).
Two versions are offered, LHM-N terminated with standard HDMI Type-A connectors and LHM-P which are terminated with micro HDMI Type-D connectors. Also known as the “pluggable� versions, LHM-P cables were developed to aid fixed installation. The micro HDMI connectors reduce the likelihood of snagging as the cable is pulled through conduit, fed through voids or behind plaster board. Other benefits
The directional plug & play hybrid cable assemblies are available now exclusively from Canford in the UK and are offered in incremental lengths ranging 10 to 100mtrs. See the Lusem OxLinx page for details. www.canford.co.uk/Lusem
LUSEM OXLINX LHM-NL10 HDMI Active optical cable
Contact:
Lusem is a subsidiary of LG Corporation in Korea and focuses on design and manufacture of display circuit devices for LG Display & LG Electronics.
Standard HDMI Type - A
Pluggable Micro HDMI
Part No Length
Part No Length
38-8801
10m
38-8861
10m
38-8802
15m
38-8862
15m
38-8803
20m
38-8863
20m
38-8804
30m
38-8864
30m
38-8811
40m
38-8865
40m
38-8805
50m
38-8866
50m
38-8806
60m
38-8867
60m
38-8807
70m
38-8868
70m
38-8808
80m
38-8869
80m
38-8809
90m
38-8870
90m
38-8810
100m
38-8871
100m
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
LUSEM OXLINX LHM-PL10 MICRO HDMI-D PLUGGABLE Active optical cable, HDMI-D to A adapters,
|
www.canford.co.uk
HD-SDI DISTRIBUTION OVER CAT5/6 AND FIBRE FOUR INDEPENDENT HD-SDI VIDEO SIGNALS OVER ONE CAT5/6 OR FIBRE CABLE • Distributes 1x 6G-SDI or 2x 3G-SDI or 4x HD-SDI signals over fibre or Cat5e/6 cable • Up to 4 SDI sources over Cat5e/6 or Fibre cable versions available
FIBRE
CAT5/6
Product #500732, 400m, 10km & 40km distances over single fibre link Multi-mode and single-mode
Product #500730, Distances of up to 150m over a single Cat5e/6
TASK LAMPS GOOSENECK LAMPS FOR LOCALISED ILLUMINATION Discreet, localised, illumination for a variety applications, such as industrial machine lights or workstation lights. A comprehensive range of accessories and cables are also available giving mounting versatility for any application.
• Available in four gooseneck lengths 6 inch, 12 inch, 18 inch and 24 inch. • L ight sources available are low intensity 2.4-Watt incandescent bulb, high intensity 5-Watt halogen bulb and 1.5-Watt LED array.
• L ow and high intensity models are fully dimmable with LED models switchable
between white and red light output. (LED Models on some ranges are switchable between white light output for normal operation and red light output for night or low-light applications.)
• L ampsets available in three gooseneck lengths with various chassis combinations,
Part No 51-6791
permanent and detachable goosenecks with UK or Euro power supplies.
CANFORD IS THE AUTHORISED UK DISTRIBUTOR OF International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| www.canford.co.uk
CANFORD
POWER LEADS
AC MAINS POWER LEADS - IEC-LOCK+
Part No 42-3401
These leads use patented female connectors with an internal locking mechanism which locks in an IEC power inlet, to provide a simple way of securing a power cable to any electrical equipment fitted with a standard IEC connector. They are invaluable for use with critical equipment, either free-standing or rack mounted and in areas subject to vibration such as ROV Control Cabinets where standard connectors may become dislodged in transit. Ready made cables are offered terminated to standard IEC male plugs, bare ends, and UK 13A and SCHUKO (right-angle) plugs.
The internal locking mechanism grips the equipment earth pin preventing accidental removal of the plug. The latch is released by an external sliding handle, which can be gripped from all sides and is pulled to release the connector from its socket. This design of release mechanism is particularly suitable for equipment with extremely closely spaced IEC outlets, such as 1U rackmount mains distributions units with 14 or 15 outlets, and some Dell and HP servers. No separate release tool is required. All styles use 10Amp, 3 x 1.0mm sq., HO5 VV-F cable. UK 13A mains plugs are fitted with a 5A fuse. All leads are supplied individually loose-coiled to avoid permanent kinks and ensure tidy installation. Larger quantities may be available bulk packed, please contact sales. Other lengths, coloured cable jackets and other types of moulded SCHUKO leads are available to special order, minimum order quantities may apply.
SCREEN BRACKETS PROFESSIONAL MOUNTLOGIC RANGE Designed for the professional installer, this range of mounts provides ‘simple, cost effective flat screen mounting solutions for commercial and public installations’. Fixed and tilting designs are ‘ladder’ style universal mounting brackets. A horizontal bar is attached to the wall; two vertical members attach to the screen which are then ‘hooked’ onto the bar. All hardware is included.
Part No 18-0045
B-TECH FLAT SCREEN MOUNTS - TROLLEYS OR FLOOR STANDS For use in corporate, commercial and educational environments, these are suitable to support either one or two, depending on model, flat-screen displays, from 32 inches to over 65 inches diagonal. All offer cable management facilities and most can be used as a stand or trolley using either the castors or adjustable feet supplied. The models differ principally in terms of maximum load, mounting compatibilities and whether they have the facility to tilt the screen. Most have either one or two steel poles which connect with a vestigial base. The screen(s) is mounted by means of various designs of hardware fixed to circular collars which grip the poles. These may be moved up and down the poles.
Part No 18-0107
Coming soon to the Canford portfolio will be the B-Tech System X range, offering light weight, robust mounting solutions for video walls. As well as this up and coming product group the entire B-Tech range is available through Canford on special order, contact our sales team for more information.
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
www.canford.co.uk
IP RATED CABINETS by Canford
455 SERIES IP55 SEALED OUTDOOR CABINETS
A range of IP55 weather-proof wall mounting cabinets available in 7, 9, 12 and 16U heights and 450mm and 600mm depths. These are ideally suited to environments which are exposed to dust and damp conditions.
• Fully welded mono-block construction • Sloping roof canopy • Gasket sealed steel door • 3-point locking mechanism • Protection against dust, rain, sleet and snow • Optional 1 or 2 fan modules • Load Capacity: 100kgs • Available with glass sealed door, rating IP54
Part No 15-1901
by Canford
466 SERIES IP66 WALL CABINETS
Designed for use in outdoor open areas subject to the full force of the elements or harsh internal environments such as chemical plants and marine applications. Manufactured in steel, offering sealing to IP66, the 466 series are available in three heights, two widths, three depths and three finishes. Finishes are Light grey, RAL 7035, powder coat, AISI 304 pre-grained stainless steel and AISI 316L pre-grained stainless steel. All units have a full steel, lockable front door offering both 130 degree opening and left or right operation. Rack profiles are recessed 50mm or 100mm from the front depending on the model. Cable access is available on the base of the painted cabinets and these are supplied complete with one cover plate and polyethylene gasket to maintain IP66 sealing.
SS304L Part No 15-3091 SS316L Part No 15-3111
• Rated to IP66 against water and dust ingress • Fully welded construction for strength and rigidity • Fully sealed and lockable steel door • Full 19” and half rack versions available • 8U, 12U & 16U heights available • 210mm, 300mm & 400mm depths available • Rack profiles recessed from front 50mm or 100mm depending on model GREY Part No 15-3071
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| www.canford.co.uk
CANFORD
HEADSETS
PELTOR EAR-DEFENDING HEADSETS Ear defending headsets, of particular use to those who have to communicate in environments with high background noise levels, for example on deck during launch and recovery of ROV’s and other tasks with high ambient noise levels
Part No 54-382
The H79 headphones have been in use in high ambient noise environments for many years and have an established reputation for effectiveness and comfort during extended use. Neck Band mount and Hard Had “clip-on” versions of the H79 headphones terminated with the J11 “Nexus” plug are available to special order.
RTS TELEX HEADPHONES RTS Telex monitoring headphones feature durable construction, high quality dynamic earphones and robust long-life cables. Mediumweight, noise reduction headphone. It has a noise reduction rating of 21dB and is suitable for use in moderately noisy environments.
Part No 54-4651
Part No 54-4652
LOUDSPEAKERS APART CEILING LOUDSPEAKERS - MARINE IP66 Apart CMAR ceiling speakers are intended for background music and paging in hot and humid locations such as leisure centres, bathrooms and maritime applications. These ‘chlorine and salt water proof, two-way marine loudspeakers’ are IP65 rated. As such they are dust tight and will withstand water projected from any direction. CMAR loudspeakers incorporate a durable ‘enforced ABS plastic frame’ and utilise stainless steel grilles. The choice of materials offers protection against rusting and facilitates their use in environments likely to experience extreme temperatures.
Part No 76-1801
APART HORN LOUDSPEAKERS - IP66 Part No
Description
76-1762 76-1763 76-1764 76-1765 76-1766 76-1767
H10-G LOUDSPEAKER Horn, 20W/8, 1.25/2.5/5/10W taps, IP66, sold singly H20-G LOUDSPEAKER Horn, 30W/8, 2.5/5/10/20W taps, IP66, sold singly H30LT-G LOUDSPEAKER Horn, 45W/8, 3.75/7.5/15/30W taps, IP66, sold singly HM25-G LOUDSPEAKER Horn, 100V 10/20/25W taps, IP66, sold singly MPLT32-G LOUDSPEAKER Horn, 100V 4/8/16/32W taps, IP66, sold singly MPLT62-G LOUDSPEAKER Horn, 100V 8/16/32/62W taps, IP66, sold singly
Canford distribute the entire apart range of commercial audio products. Contact Stephen Gallagher, Canford Product Manager at slg@canford.co.uk for more information.
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
www.canford.co.uk