TOURING & EVENTS SOLUTIONS canford.co.uk
FIBRE SOLUTIONS FROM CANFORD
CANFORD ANGLED 12 WAY OPTICALCON DUO SMPTE FIELD TERMINATION BOX These 1U rack enclosures will be manufactured to accept either 8 or 12 opticalCON connectors and are designed to facilitate easy on site termination. The range will be fitted with Neutrik NO2-4DW-1A SMPTE DUO connectors and blue singlemode flanges. The electrical contacts on the connectors will be terminated to 6 pin Mate-N-Lok male panel connectors which in turn terminates to a the female bulkhead connector fitted within the enclosure. A 24 way splice tray and 2 cable management spools are also provided within the case. During installation the SMPTE 311M cable is brought into the enclosure and the electrical conductors are fitted with the supplied crimp contacts before being inserted into the female Mate-N-Lok bulkhead connector. The fibre cores are routed via the cable management spools to the splice tray and spliced to the provided LC patch cords before connecting to the rear of the DUO connector. The enclosure will come supplied with all of the required components to facilitate easy installation.
CANFORD ANGLED UNIVERSAL PANEL Based on the same design as the opticalCON Field Termination Box these panels are supplied in 8 and 2 way and incorporate a simple cable management plate at the rear. They are suitable for use with any D series/Universal series connector and suited to applications where it is beneficial to relieve the stress on the mating cable.
CANFORD OPTICALCON BREAKOUT BOXES Where multi-way fibre cables fitted with Neutrik opticalCON Dual or opticalCON Quad connectors are used to provide a point-to-point link, these break-out boxes split the two or four channels to a variety of other formats including; Duplex LC, SC and ST connectors, depending on the model. The connectors are mounted in a rugged, extruded enclosure, suitable for use in broadcasting and live-event environments. Both multi-mode and single-mode types are offered. These designs are assembled to order, in short time scales, using stocked modules. Alternative configurations such as mixed LC, SC and ST connections can also be accommodated.
50-0302 50-0316
CANFORD LEMO BREAKOUT BOXES
50-0371
We have extended our range of Optical breakout boxes to include LEMO SMPTE connectors. Our new breakout boxes allows the LEMO SMPTE connectors to be broken out into either SC, LC, ST, opticalCON Duo or opticalCON Quad connectors giving the customer the flexibility to mix different formats together.
CANFORD HMA BREAKOUT BOXES Adding to our range further we now offer HMA connectors. Our new breakout boxes allows the 2ch or 4ch HMA connectors to be broken out into either opticalCON Duo, opticalCON Quad, HMA 4ch to 2ch or SC, LC, ST connectors giving the customer the flexibility to mix and convert different formats together.
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
FIBRE SOLUTIONS FROM CANFORD
FIBRECO EXPANDED BEAM CONNECTOR TERMINATION • Withstands harsh environments, such as Touring and Festivals • Reliable with reduced sensitivity to dust and dirt contaminants • Time saving hermaphroditic mating • Simple, on-site cleaning • Singlemode and Multimode versions • Custom cable assemblies available – contact sales for more information
CANFORD SMPTE311M HYBRID FIBRE CAMERA CABLE BREAKOUT ASSEMBLIES With Lemo panel type connectors These industry standard, hybrid fibre, HD camera cable breakout assemblies use Lemo SMPTE304 connectors and are offered in a variety of versions. The Lemo 3K.93C stainless steel connectors incorporate the highly-reliable Lemo push-pull latching system and are suitable for up to 20,000 mating cycles.
50-1122
50-1112
CANFORD PRE-TERMINATED SMPTE CABLES Canford now offers a variety of SMPTE fibre cables including Furukawa, Draka, Belden OCC and Percon that are kept in stock to ensure quick turn-around times on the cable assemblies. Cables can be terminated to customers’ specification using LEMO connectors as well as LCs, SCs and STs. Pre-terminated cables can be used in conjunction with the Canford Hybrid Fibre Field Termination Box. Code Description
Code
Description
36-610 DRAKA SMPTE311 FIBRE HDTV CAMERA CABLE, PUR
36-617
FURUKAWA 92SM-16-37.5 SMPTE HD CAMERA CABLE, 16mm J grade ARIB fibre
36-611 DRAKA SMPTE311 FIBRE HDTV CAMERA CABLE, FRNC, LFH
36-680
OCC SMPTE “Essential” SMPTE HD CAMERA CABLE
36-619 DRAKA SMPTE311 FIBRE HDTV CAMERA CABLE, High Flex PU
60-7804EPU BELDEN PUR SMPTE HD CAMERA CABLE
36-614 FURUKAWA 92SM-6.8-98.3 SMPTE HD CAMERA CABLE, 6.8mm J grade ARIB fibre
60-7804ELY
BELDEN 7804ELY SMPTE311 FIBRE HDTV CAMERA CABLE
36-615 FURUKAWA TV-OM-AMS SMPTE HD CAMERA CABLE, 9.2mm A grade SMPTE fibre 60-7804E
BELDEN PVC SMPTE HD CAMERA CABLE
36-616 FURUKAWA 92SM-9.2-37.5 SMPTE HD CAMERA CABLE, 9.2mm J grade ARIB fibre
PERCON SMPTE HD CAMERA CABLE
PALADIN FIBRE TOOL KITS
36-670
25-801
Provides the common tools needed to satisfy the varying, vital tasks that a fiber optic technician may encounter. Every kit allows a technician, to cut, strip and prepare fiber optic cables for termination.
50-1526
SENKO XP FIT PLUS TERMINATION KIT The installation kit contains everything needed for installation of SC and LC XP Fit Plus connectors. No epoxy, polishing film or other consumables are required. No need for electrical power to complete terminations.
SENKO XP FIT PLUS FIBRE CONNECTORS Field Terminated Pre-polished, pre-assembled, LC, SC and ST fibre connectors available in both multimode and singlemode versions. They are designed for field-termination without the need of adhesives or polishing.
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
50-1525 50-1521
| canford.co.uk
RANGE EXTENDING ACTIVE OPTICAL HDMI
NEW CANFORD ACTIVE OPTICAL CABLES - HDMI 2.0 - Locking 38-9320 These locking, active, optical, HDMI 2.0 cables are intended for applications where longer cable-run lengths than those obtainable with standard copper HDMI cables are required. They are also useful where the cable needs to pass through environments with high electrical interference. They offer a considerably more elegant and cost-effective solution for long cable runs than Cat5E cable with converter box systems. Applications include professional AV systems interconnection, indoor and outdoor digital signage and kiosks, plus home theatre systems in larger properties. All cables are supplied with locking connectors which are designed to help secure them in place to prevent disconnection, allowing for a more robust installation versus non-locking HDMI cables. These cables are CPR certified Cca, s1, d0 and are available in a range of lengths from 10 to 100 metres. They handle 18Gbps and 4K at 60Hz, with 48-bit colour-depth and 3D capabilities. Audio can be transmitted at 8-channel PCM, Dolby Digital True HD, or DTS-HD Master Audio. There are two standard versions of these cables, one terminated with full size locking type A HDMI connectors on both ends and the other terminated with locking micro HDMI type D connectors supplied with adapters to fit full-size, locking type A connectors. Included with the adapter variants are a USB to DC power cable and a cable pulling tool Intended to aid fixed installation; the micro HDMI connectors reduce the likelihood of snagging as the cable is pulled through conduit, fed through voids or behind plaster board. Other benefits may include applications where cables must pass through congested and/or small apertures, such as internally wired brackets and mounts. Replacement adapters are available if required; 38-9332 (Display) and 38-9333 (Source).
NEW CANFORD ACTIVE OPTICAL CABLES - HDMI 2.0 - Armoured - Locking These locking, active, optical, HDMI 2.0 cables are intended for applications where longer cable-run lengths than those obtainable with standard copper HDMI cables are required. They are also useful where the cable needs to pass through environments with high electrical interference. They offer a considerably more elegant and cost-effective solution for long cable runs than Cat5E cable with converter box systems.
38-9341
All cables are supplied with locking connectors which are manufactured to help secure them in place to prevent disconnection, allowing for a more robust installation versus non-locking HDMI cables. Designed for rental and stage use, applications can include professional AV systems interconnection, indoor and outdoor kiosks as well as home theatre systems in larger houses. These cables are 5.8mm in diameter with a TPU (thermoplastic polyurethane) jacket. Under the jacket, a layer of kevlar surrounds a flexible, stainless-steel conduit that protects the core of the cable against rodents. Additional Kevlar is placed between wires within the conduit for added strength. Good flexibility is maintained with a bend radius of 45mm. All lengths are terminated with locking HDMI type A connectors. No external power is required. Cables are available in a range of lengths from 10 to 90 metres. They support 18Gbps and 4K at 60Hz, with 48-bit colour-depth and 3D capabilities. Audio can be transmitted at 8-channel PCM, Dolby Digital True HD, or DTS-HD Master Audio.
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
CANFORD CABLES
DATA & ETHERNET CANFORD CAT5E-F-J CATEGORY 5E DATA CABLE Stranded conductor, screened Multi-circuit deployable Cat5E cables, for both studio and touring/OB applications, based on Canford’s CAT5E-F screened flexible cable. Heavy duty versions (formerly called ‘touring’) use the standard CAT5E-F 6.2mm diameter flexible cable, with colour coded and numbered individual jackets. The overall jacket has a tough layer of PUR (polyurethane) for abrasion resistance. Canford uses PUR on many cable designs to provide excellent wearing characteristics in the harsher environment of outside broadcast and touring applications
31-884
31-888
Flexible versions (formerly called ‘studio’) have a design optimised to give the best possible flexibility, and uses the CAT5E-F-M 5.8mm diameter cable, with colour coded and numbered individual jackets. The overall jacket is soft PVC for optimum flexibility. 31-894
CANFORD CAT5E-F CATEGORY 5E DATA CABLE Stranded conductor, screened - Deployable Increasing use of network and data cables between audio and video devices on location calls for a Category 5E cable that is designed specifically for deployable use. Basic Category 5E F/UTP is a relatively inflexible installation cable, and even the slightly more flexible patchcord type still has very poor handling characteristics. This Category 5E cable has been designed specifically for the professional audio and video user, and is intended to handle like a typical microphone cable.
31-850
CANFORD CAT5E-F-R CAT 5E DATA CABLE Stranded conductor, screened - Deployable, Ruggedised This special version of Canford’s CAT5E-F flexible Cat5E cable has a polyurethane outer jacket providing greater abrasion resistance (but slightly less flexibility) than the PVC on the standard design. Otherwise it is a similar F/UTP construction. It is suitable for use with both standard RJ45 connectors (round entry version), the Neutrik Ethercon and most other ruggedised RJ45 designs, or any other connector with a suitably sized entry gland. The cable is also suitable for DMX512 applications. The greater heat tolerance of polyurethane may be useful.
31-890
CANFORD CAT5E-F-M CATEGORY 5E DATA CABLE Stranded conductor - Miniature, Flexible A reduced size version of Canford CAT5E-F, designed specifically for installations where a very flexible screened Category 5E cable is required.
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
31-860
| canford.co.uk
CANFORD CABLES
CANFORD CAT5E-R CAT 5E DATA CABLE Stranded conductor, screened - Deployable, ruggedised
31-948
This specialist version of Cat5E SF/UTP (foil and braid screen) has a very tough polyurethane outer jacket, and has moderate flexibility. The jacket is two-layer, the inner layer is low fire hazard material, so the cable can be classed as ‘low fire hazard’.
CANFORD CAT 6 F DEPLOYABLE DATA STRANDED CONDUCTOR UTP CABLE
31-870
Increasing use of network and data cables between audio and video devices on location calls for a Category 6 cable that is designed specifically for deployable use. Basic Category 6 UTP is a relatively inflexible installation cable, and even the slightly more flexible patchcord type still has very poor handling characteristics in deployed applications.
DRAKA CAT6 SHIELDED Solid Conductor DRAKA Category 6 U/FTP 4 twisted pair solid conductor cable, patented foil wrapping of two pairs 1 & 2, 3 & 4, Low Fire Hazard jacket (LSHF). Also available as a Category 6 S/FTP 4 twisted pair solid conductor cable, patented foil wrapping of two pairs 1 & 2, 3 & 4, with overall Braid, Low Fire Hazard jacket (LSHF).
31-936 U/FTP, LFH Jacket (Blue)
31-928 S/FTP, LFH Jacket (Blue)
TUK CATEGORY 6A STRAIGHT AND MULTI-ANGLE FIELD TERMINATION PLUGS These RJ45 plugs allow for time-saving and efficient on-site assembly with no requirement of special tools. Contact our sales team for more information
NEW CANFORD CAT7-F CAT 7 DATA CABLE Stranded conductor, screened - Deployable, ruggedised Increasing use of network and data cables between audio and video devices on location calls for a 31-840 Category 7 cable that is designed specifically for deployable use. Basic Category 7 cable is a relatively inflexible installation cable, and even the slightly more flexible patchcord type still has very poor handling characteristics in deployed (as opposed to patching) applications. This Category 7 cable has been designed specifically for the professional audio and video user, and is intended to handle like a typical microphone cable. It has recently been approved by Waves Audio for use with their Waves Audio Soundgrid systems. It has an extra-flexible individually screened 4 pair core structure with an overall braid screen that maintains Category 7 performance, then a rugged polyurethane outer jacket, to give superb flexibility and handling characteristics. Suitable for use with both standard RJ45 connectors (round entry version), the Neutrik Ethercon and most other ruggedised RJ45 designs, or any other connector with a suitably sized entry gland. The cable is also suitable for DMX512 applications.
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
CANFORD CABLES
AUDIO CABLES CANFORD FST - Foil Screened Stranded Conductor Twin Cable Standard, Low Fire Hazard and Flexible type is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be suitable for AES/EBU digital audio as well as analogue microphone and line level signals. Wire insulation is polypropylene, which shrinks back minimally during soldering (considerably less than PVC or polyethylene). Standard has an overall PVC jacket is bonded to the screen tape on application so that one stripping action removes jacket and screen, leaving the signal wires and earth wire free for further processing. It is not necessary to have to unwind tape screen after jacket stripping nor is it necessary to become involved in the unravelling of braided copper screens. FST-LFH Low Fire Hazard is technically identical to standard FST, except that the PVC jacket is replaced by an LFH material. Wiring specifications for many public buildings now call for LFH cables to be used in certain areas, notably in corridors etc. Under combustion circumstances, LFH cables have a significantly reduced smoke emission, and the gaseous products contain no toxic halogens. FST-F Flexible is constructed in a similar way to the easy-strip FST, but has changes to improve the flexibility. The insulation has a slightly reduced wall thickness, and a significantly longer lay length of the twist than FST, giving a single, long length strip. The overall jacket is a soft PVC with semi-matt finish, and overall diameter is slightly less the FST.
31-001 FST, 31-280 FST-F, 31-059 FST-LFH
CANFORD FST-DMX-LFH - Foil Screened Stranded Conductor Twin Cable - For DMX512 Data - Low Fire Hazard Foil screened, 120 ohm installation cable, specifically for DMX512 lighting-control applications, designed to meet RS485 data cable specification. Available in one and two pair versions. Wire insulation is polypropylene which shrinks back minimally during soldering (considerably less than PVC or polyethylene). The overall jacket is bonded to the screen tape so that one stripping action removes jacket and screen, leaving the signal wires and earth wire free for further processing.
CANFORD FST-M - Foil Screened Stranded Conductor Twin Cable - Miniature
31-052
31-240
This D’n’A series (Digital and Analogue) cable is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be suitable for AES/EBU digital audio as well as analogue microphone and line level signals. Wire insulation is polypropylene, which shrinks back minimally during soldering (considerably less than PVC or polyethylene). It is a smaller version of the classic Canford FST, for use where space is at a premium.
CANFORD HST - Helical Screened Stranded Conductor Twin Cable A high performance range of general purpose extra-flexible twisted twin conductor, helical (“lap”) screened cables, suitable for both microphone and general purpose uses. The cable construction design is the result of extensive research by Canford Audio, and the University of Durham Engineering Department. The outer jacket is an extra-flexible, soft PVC with semi-matt finish.
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
30-150
| canford.co.uk
CANFORD CABLES
CANFORD SQ MICROPHONE CABLE - Starquad
30-418
Designed for the transmission of sound through noisy areas the balanced quad cable is used as a twisted pair with capacitance unbalance characteristics designed to cancel out the worst kind of interference – external noise. The product is a flexible high quality cable for use in electrically hostile environments.
CANFORD FSJ - Foil Screened Stranded Conductor Individually Jacketed Multipair Cable Flexible and Low Fire Hazard type is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be suitable for AES/EBU digital audio as well as analogue microphone and line level signals. The individual cores are jacketed ready for termination directly into connectors etc., and the inner jacket is bonded to the screening foil so strips away in a single action.
31-512
FSJ is individually jacketed multipair cable based on Canford’s FST-F ‘Flexible Foil Screened Twin’ in order to offer enhanced flexibility. FSJ-LFH is a low fire hazard (‘LSOH’) cable based on Canford’s FST-LFH twin conductor, foil screened cable, for installed applications.
TEN47 TOURLINE MULTIPIN AUDIO CONNECTORS
47-142 47-111
47-141
47-112
CANFORD TOURLINE BREAKOUT CABLES - 25 and 37 pin
38-8141
These cables break out from the 25 and 37-pin connectors widely used by sound re-reinforcement and broadcast facilities companies. They are completely compatible with similar connectors from other manufacturers.
VIDEO CABLES CANFORD SDV-L-X-LFH - HDTV AND SERIAL DIGITAL VIDEO CABLE (1.0/4.8) Low Loss, Extended Performance - Low Fire Hazard Extended performance low-loss coaxial 75 ohm cable specifically for 3GHz HDTV and serial digital video signals, with low-smoke, zero-halogen material outer jacket. 36-637
NEW CANFORD SDV-XF CABLE Joining our highly successful SDV-F flexible video coax, we are adding an extra-flexible version with a double braid screen - SDV-XF. Contact our sales team for more information 36-540
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
CANFORD CABLES
CANFORD SDV-F-HD - HDTV, SERIAL DIGITAL AND ANALOGUE VIDEO CABLE (1.2L/4.8Dz) - Flexible, Heavy Duty
36-580
A cable designed specifically for deployable applications where HDTV or SDI signals are to be carried. The construction is optimised for extremely high flexibility, and the polyurethane jacket provides resistance to abrasion and durability. This is the HDTV cable that handles like the softest of microphone cables.
36-716
36-696
NEW CANFORD SDV-UHD-LFH AND SDV-L-UHD-LFH CABLE
If you need your 12G signal to go further, without up-sizing the cable diameter, this new cable gives you that extra distance.
CABLE MANAGEMENT CANFORD SKELETON CABLE REELS -Three-Flange Reels
PLASTIC CABLE TRAY 35-6103 or 35-6104 CANFORD Plastic Cable Tray 35-6113 or 35-6114 Fixing brackets
Extremely rugged ‘skeleton’ cable drums suited to life on the road and the studio. Suitable for coiling and protecting the inner ‘tail’ of SMPTE 311M hybrid fibre camera cable. An optional combined trolley and reeling stand is available for transporting the drums. Optional combined trolley and reeling stand also available.
FIRE RATED CABLE CLIPS 39-1402 D-LINE SAFE-D30 U-CLIP
39-0412 STAINLESS STEEL CABLE TIES
39-501 CANFORD CABLE CROSSOVER TAPE
35-5195
SLEEVING
39-313 TECHFLEX EXPANDABLE SLEEVING Non-slip
39-318 TECHFLEX EXPANDABLE SLEEVING
35-742 TECHFLEX WRAPPABLE SPLIT BRAIDED SLEEVING
39-310 BRAIDED SLEEVING - EXPANDABLE
39-0157
CABLE GRIP STRIP 39-0151
D-LINE floor cable management products to enhance public safety and protect cables.
International Sales: +44 (0)191 418 1133
39-0150
| international@canford.co.uk
| canford.co.uk
POWER SOLUTIONS
42-4405
POWERCON 20 AMP
Neutrik Powercon NAC3FCA 20 Amp connectors terminated to Duraplug UK 13A plugs. All types use 13Amp, 3 x 1.5sq.mm cable with Arctic PVC flexible jacket. Plugs are fused with a 13A fuse.
IEC-LOCK IEC 60320 (CEE22) These patented design, IEC 60320 connectors have an internal locking mechanism which mates with and locks to any male C14 (inlet), to provide a simple way of securing a power cable to any electrical equipment. They are invaluable for use with critical equipment, either free-standing or rack-mounted and in areas subject to vibration, such as outside broadcast vehicles, touring and ‘fly-away’ kit, where standard connectors may become dislodged in transit. They are available in two forms; female C13 type (outlet) cable connectors for use between appliances and their mains power sources and female F type (outlet) panel connectors for use as an interconnection between one appliance and another. 42-3200 IEC-LOCK IEC MAINS CONNECTOR Female cable, locking, rewireable
42-3641IEC-LOCK IEC MAINS CONNECTOR C13 type, female, cable, locking, vertical up/down, rewireable
42-3300 IEC-LOCK IEC MAINS CONNECTOR F type, female panel, snap-in
42-3640 IEC-LOCK IEC MAINS CONNECTOR C13 type, female, cable, locking, horizontal left/right, rewireable
PCE INDUSTRIAL AC MAINS POWER CONNECTORS - Midnight range The Midnight Range of power connectors are most commonly used in the Touring and Events industries. Manufactured in Austria with quality in mind the Black housing of these connectors helps technical equipment fade into the background, keeping all the attention where it should be, on the production. Discreet – For use when equipment needs to go unnoticed. Adaptable – Available in splashproof IP44 and watertight IP67 variants. Robust & High Quality – Manufactured from Polycaprolactam (PA6) with brass contact pins to meet BS EN 60309 – 1:1999, BS EN 60309 – 2:1999 industry standards. 42-848 Reliable & Safe – Rated 220 – 240V AC, available in 16 amp, 32 amp or 63 amp options, 2-pole plus earth.
42-848
42-847
MAINS POWER DISTRIBUTION UNITS Canford design and manufacture over 240 different Mains Distribution Units (MDUs) in the UK. Our wide range of 1U rackmount MDUs are intended for broadcast and pro AV applications where system reliability is paramount. The Canford MDU range includes four input options, loop-through outlets, switched for un-switched, with a green illuminated rocker switch or power present LED and Economy versions.
42-9351
Use our online Mains Distribution Selection Tool to find MDUs that meet your requirements.
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
POWER SOLUTIONS
EMO POWER DISTRIBUTION PANELS AND FLOOR BOXES This range of modern 1U and 2U rack-mounting panels and floor boxes have been engineered by Canford specifically to provide a versatile, robust and safe solution suitable for powering a diverse combination of equipment. They are more commonly used in mobile racks and flight cases for temporary installations in live entertainment, including modern theatre, touring systems, location recording and outside broadcast work though their unique design and configuration makes them also equally suited to many fixed installs. All Rackmount models have LED Traffic Light Indicators to show Supply Present, Earth Present and Neutral Fault status which can be disabled via a rocker switch for low light on stage use and to enable PAT testing. All output connectors are wired via overcurrent thermal circuit breakers. Earth Grounding points feature on the rear of all models as standard. Floor boxes are fitted with either a 15A Over Current Thermal Breaker or a 16A RCBO giving both overcurrent and earth leakage protection, especially useful when connecting equipment with unknown maintenance history.
42-621
42-614
42-616
42-622 42-612
42-618
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| canford.co.uk
LIGHTING
EMO LED RACKLIGHTS The LED Racklight mounts in an equipment rack and provides a highbrightness light source to illuminate the controls of equipment mounted in the rack below it. Designed to keep the spillage of light to a minimum, the Racklight is highly useful not only back-stage and in equipment rooms, but also, in some positions, within a venue.
518581
NEW CANFORD LED RACKLIGHT
51-8551
The rack light can be quickly changed from white light to one of six colour options using the front mounted rocker switch. The colour can be pre-selected using the RGB dip switches on the rear of the unit and is powered via a 12v 2A plug in PSU. Connection is via a 2.1mm locking DC connector to ensure a solid connection when used within mobile racks. A USB socket is included on the front panel allowing for charging a mobile phone or similar device. Being only 100mm deep the rack light can easily fit behind most equipment installed within a rack.
LIGHTWAND RACK LIGHT The Lightwand rack light uses twelve high-intensity LEDs to provide illumination to 19-inch rack-mounted equipment. The clear, even and diffuse white light can be directed both downwards and upwards by rotating the lamp unit.
51-761
CANFORD SCRIPT LIGHTS These units, constructed from elegant aluminium extrusions, have fully adjustable shutters to provide a narrow ‘curtain’ of light directed at the work surface. Low Voltage and DALI / DSI Dimable versions available
LITTLITE GOOSENECK LAMPS
51-954
51-6732 51-870
51-6788
51-802
As a distributor of the Littlite brand, Canford stock a range of Littlite products including littlite gooseneck task lights.
LITTLITE LED 1U RAKLITE The RL Series can provide localised illumination for a fully-installed equipment rack or allow the user to adjust illumination for patching and general maintenance. The lights are available in two formats; one is a recessed panel, fitted with a dimmer and one or two goosenecks, each with a choice of halogen or LED lamps. The alternative is a rack-mounting panel, with dimmer, to take connectorised gooseneck lamps.
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
51-6754
|
canford.co.uk
CUSTOM METALWORK SOLUTIONS FROM CANFORD
CANFORD CUSTOM RACK PANELS Utilising in-house machining centres, we are able to offer a very fast turnaround custom panel service. Applications include studio wallbox access points, vehicle tailboards, multi-format post production suites, multimedia-rack patching or presentation-suite feeds where non-standard connector combinations are required. Manufactured from rigid aluminium extrusions, panels can be delivered pre-fitted with almost any bulkhead-mounting audio, video or data connector-combination. Cranked lacing-bars giving easy access to the rear of the connectors can be individually specified. Designation-strip holders with snap-on covers, offering up to 7.5mm of printable height, may be fitted as required. Templates for printing designation strip labels, available as a DWG file for AutoCAD and compatible applications, can be downloaded from the appropriate product page on the Canford website.
ENGRAVING BY CANFORD Equipped with both CO2 and fibre technology the Canford in-house, state of the art, laser engraving machine can mark or engrave a wide range of materials and finishes including anodised aluminium, stainless steel, powder coated steel/aluminium, plastics, laminates and wood. The process is not limited to simple text, but can also incorporate intricate company logos and other graphics. With a working area of 1000mm x 610mm the machine is able to accommodate most requirements and is ideal for permanent labelling of all types of panels and plates, be they Canford standard products or custom designs. Coloured infilling is an option where suitable. Ideally suited to single colour applications where the volumes are relatively small or there is variation in the print from plate to plate.
CANFORD WALLBOX CONNECTION PLATES Steel connector mounting plates are available to fit metal wallboxes used in sports stadia, arena, theatres, swimming pools, theme parks, race courses and other venues where a broadcast or communications cable infrastructure is installed. Panels are specially made to order and are usually supplied with customised threaded mounting posts and/or bolts for attachment to the wallbox or cabinet. Virtually any combination of connectors; audio, video, data, power and communications can be accommodated and the Canford design office will assist with the detailed layout design, markings and lacing bar specification. Panels may be fitted with designation strips, or engraved. Larger panels are also available, for applications including OB vehicle AC mains power termination, power cabinets and control, metering and switchgear cabinets. Panels may be supplied unpopulated, pre-fitted with connectors, or as a kit with loose connectors and mounting hardware. Cable assemblies such as triax and SMPTE 304M/311M hybrid fibre are also available. A wide range of metal or plastic wallboxes, offering varying levels of ruggedness and environmental protection, are also available.
CANFORD CUSTOM SCREEN PRINTING SERVICE Using our significant experience of the silk screen printing process Canford is able to offer this service to customers who are looking to uniquely identify, promote or label their product. From helping to develop the initial artworks to producing the final film and mesh frame we can work with the client to ensure the end result meets their specification and delivers a high quality print. Typical applications include the branding of rack blanks with a company logo, service details and contact information. Once fitted into a rack, this provides both useful information to the end user and additional, cost-effective marketing for the installer.
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| canford.co.uk
CONNECTION PANELS AND STAGEBOXES
CANFORD UNIVERSAL KEYSTONE PANELS ‘Total flexible solution’
44-3791
1U, 19”, 24 way keystone panel available in Grey or Black. Interchangeable keystone modules available in CAT6, CAT6A, CAT5E, SC Fibre, LC Fibre, ST Fibre, HDMI, USB2, USB3, RJ11 / 12, BNC 50Ohm, 75Ohm & HD, F Type, 3.5mm Jack also Feedthrough modules available in CAT6, CAT6A & CAT5E, panels also available in 8 & 16 way.
ADAPTORS - ‘D’ cut out / Keystone ‘D’ cut out / keystone adaptor gives the ability to use keystone modules with ‘Canford Universal’ ‘D’ cut out panels available in 1U - 8way, 12way, 16way, 2U - 32way and 3U - 48 way, three colour - Grey, Dark Grey & Black. 45-3391
49-175 CANFORD D-SERIES CABLE GLAND Plain, M16
40-299 CANFORD XLR BLANKING PLATE D-series, tapped mounting holes
49-177 CANFORD D-SERIES CABLE GLAND Spiral, M16
CANFORD UNIVERSAL CONNECTION PANELS - Rapid Assembly Multi-purpose 1U panels developed to allow rapid rear mounting of connector configurations without the need for specialist tools or fiddly nuts. These panels are designed and manufactured from 2mm steel and include only a single return at the top so that they can accommodate the provided Neutrik MFD M3 tapped mounting frame which effectively snaps onto the rear of any Neutrik D-Series or Canford Universal Series connector and allows the connectors to be quickly mounted using the supplied M3 countersunk screws. These panels are also suitable for rear mounting Neutrik Speakon and Powercon D-series connectors. 45-3331
CANFORD UNIVERSAL MODULAR CONNECTION PANELS
45-3900
Developed from the long-established Canford ‘Universal Connection System’, to accommodate connectors that are too large for the original system. They allow the user to mount virtually any combination of audio, video, data and power connectors in a 2U rack panel without costly custom metalwork.
CANFORD CAT5E, CAT6 AND CAT6A RJ45 FEEDTHROUGH AND PRO PATCH PANELS
45-3425
Screened are supplied fully populated with feed-through screened RJ45 CAT6A sockets enabling system patching and easy connection of portable or external equipment. IDC versions are supplied with screened RJ45 CAT6A IDC sockets. These ‘Tool-less’ sockets have IDC termination with butterfly-style levers to close the housing and make the termination. Unscreened are supplied fully populated with feed-through unscreened RJ45 CAT5E sockets enabling system patching and easy connection of portable or external equipment. Available in CAT6, CAT6A & CAT5E, panels also available in 8 & 16 way.
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
CONNECTION PANELS AND STAGEBOXES
NEW
CANFORD CONNECT XLR CONNECTORS
by Canford
A carefully selected range of XLR connectors, manufactured specifically for Canford Audio.
41-9313
41-9312
41-9314 41-9311
93-2141
AUDIOPRESSBOX CONFERENCE SPLITTERS - PORTABLE Press splitters are used to avoid the unsightly clutter that results at events such as press conferences, when every broadcasting organisation present tries to erect a microphone directly in front of the speaker, precisely where the cameramen would rather they did not. The splitter takes a small number of inputs from microphones or the local mixer and distributes the signal to a large number of outputs for use by the media.
NEW CANFORD STAGEBOXES - Trapezoid, all metal
49-0803
A range of robust and economical, trapezoid shaped stage boxes, supplied unpopulated or with popular combinations of up to 24 D-series connectors.
CANFORD STAGEBOXES - Modular, steel A series of rugged steel stageboxes offering a vast range of connection possibilities when fitted with ‘Universal’ series connectors on the top plate and popular multicore connectors on the ends.
CANFORD WALLBOXES - Surface mounting, modular A series of rugged steel wallboxes offering a vast range of connection possibilities when combined with ‘Universal’ series connectors.
CANFORD CATKIT ETHERCON STAGEBOX SYSTEM This range of robust stage boxes, patch boxes and super-flexible, rugged, multicore cables is designed to withstand the rigours of life on the road. Available in four-way or eightway configurations with standard RJ45-compatible etherCON connectors, they offer a solution to deploying multiple Cat5E equivalent cables in demanding environments, including television outside broadcast and live-performance rigs. Stage boxes are fitted with captive multicore cables in various lengths, with etherCON break-out tails, Multicore cables have etherCON break-out tails at each end, patch boxes provide back-to back etherCON connectivity and breakout to standard RJ45 Cat5E patchcords. 38-8170
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| canford.co.uk
MICROPHONES
CANFORD GOOSENECK MICROPHONE 250XB Black
53-182
This range uses a high quality 200 ohm dynamic capsule in an attractive satin nickel or black finish robust metal housing, with foam windshield insert. The range is particularly suited to communications and paging applications, having a response with a peak in the middle of the speech band and good back-to-front rejection ratio.
92-699
CANFORD LAVALIER USB MICROPHONE A lavalier mic with USB interface, for direct connection to laptops, tablets and PC’s, with omnidirectional polar pattern for optimum speech pickup. Included accessories: Foam windshield, croc clip mount, soft carrying pouch.
CANFORD RADIO MIC POUCHES 53-9011
A range of pouches for the most widely used radio mic transmitters, for use when it is not possible to conceal the unit in a pocket. They are made in a machine washable black or white neoprene foam material.
CANFORD CONDENSER GOOSENECK MICROPHONES Black slimline goosenecks (8mm diameter) with small high performance microphone head (13.2mm diameter). Available in a range of lengths, the model code indicates the length from top of head to panel surface in mm. (For XB types, this assumes the microphone is plugged into an XLR socket mounted in the panel).
53-037
BEYERDYNAMIC M 58 MICROPHONE ENG
92-002
Designed specifically for ENG use this omni-directional moving-coil microphone has a sophisticated internal shock-mount, dramatically reducing handling noise.
CANFORD WINDSHIELDS A range of foam windshields in a variety of standard colours, manufactured specifically for Canford Audio by Europe’s largest specialist windshield manufacturer. (Sizes cover most popular microphone shapes.) 53-410
BACTERICIDAL LINT-FREE WIPES
Impregnated with a 70% iso-propyl alcohol mix.
55-183
Contact:
CLEANING ISOPROPYL ALCOHOL An all-purpose cleaning fluid, harmless to tape heads, optical lenses and other delicate areas. Removes adhesive and other sticky residues, oil deposits, as well as general dirt build up etc. 99.9% pure alcohol. 55-175
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
COMMUNICATIONS SYSTEMS
CANFORD DANTE INTERFACES These Canford Dante adapters provide an alternative to the existing Audinate and Amphenol in-line adapters and avoiding captive cables. They are simple stereo audio adapters to convert between either analogue or digital, to or from Dante. The range consists of three units, providing different audio connectivity options. Each unit is powered by PoE (Power over Ethernet), no external power is required.
Reverse
20-073 CAN-DIO
GREEN-GO DIGITAL COMMUNICATIONS OVER ETHERNET Green-GO is an award winning, digital intercom system which operates over ethernet • No central matrix – substantial cost saving and no single point of failure! • Full duplex, clear audio, low latency, programmable • Create simple or complex systems - up to 250 Groups and 3000 Users • Ideal for live events, broadcast and industry
MULTI-CHANNEL MAIN STATIONS AND EXTENDERS • 1U Rackmount and compact desktop formats • 36 fields (2 pages of 18) • Assign fields as a function or an intercom channel • Loudspeaker or headset communication • Multi-function LED pushbuttons and RGB TFT touchscreen • 2 4 Channel Extender units now available (link up to 9 to a main station)
26-786 GGO-MCX
DECT WIRELESS INTERCOM • High audio quality with low latency • Robust RF coverage • 32 Intercom Channels
26-775GGO-BPX
WALKIE-TALKIE INTERFACE For reliable linking to UHF Radio comms 26-796 RDX INTERFACE + Radio
RGB LED BEACON
26-797 GGO-BEACON
Assignable to any Group or a single User. Indicates ‘Call’ or ‘Cue’ received
SW18GBX • Gigabit Switch, easy menu navigation • 16 Ethernet Ports, 2 SFP cages for fibre • Set up separate VLANs
26-784 GGOSW18GBX
DISTRIBUTED IN THE UK AND IRELAND EXCLUSIVELY BY CANFORD
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| canford.co.uk
COMMUNICATIONS SYSTEMS
tecpro by Canford
TECPRO 2-WIRE ANALOGUE SYSTEM Simple and intuitive to operate, Tecpro intercom enables a group of people to have a simultaneous, two way conversation in real time with excellent intelligibility. The size of the group can vary between 2 and 80+ people and they can communicate on up to two independent intercom groups.
27-511
BP511 SINGLE CIRCUIT BELTPACK (XLR-3 connectors) Tecpro beltpacks are tough, lightweight, remote intercom stations which are typically hung from the belt but can be used free standing or mounted on a suitable surface. They offer full-duplex operation and have been designed for portable use where care may not always be taken by the user.
HS581 HEADSET STATION, single channel
27-581
Offering similar facilities to a beltpack, the Tecpro HS581 is a single channel Headset Station suitable for flush mounting to walls, table tops or control consoles. Cables are terminated to a fixed screwtermination block mounted on the PCB. 27-352
LS352 LOUDSPEAKER STATION (desktop) Loudspeaker Stations provide local monitoring of intercom circuits without the need to wear headphones. The built-in microphone makes them suitable for hands-free operation, allowing full-duplex simultaneous talk and listen conversations to take place. If required, a headset may be plugged in, disabling the internal microphone and speaker. LS300 Loudspeaker Stations offer single circuit operation as standard. Dual circuit versions are available on some models. 27-741
MS741 MASTER STATION, 1U Designed to be the hub of a wired intercom system, the MS741 is based on the successful MS731 Master Station and is compatible with current and legacy Tecpro products.
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
|
canford.co.uk
HEADSETS
27-320
27-310
27-210
TECPRO DMH320 and SMH310 • • • • • • • • •
27-220
DMH220 and SMH210
igh performance headsets specifically designed for communications use H Very robust construction, made from unbreakable flexible composite material Dual-chamber foam-filled ear-shells, larger than 200 series for wearing comfort High acoustic isolation on DMH320 for reduced ear fatigue Extended response ear loudspeakers Broadcast quality noise-cancelling dynamic microphone New boom design allows use with boom at left or right hand side Mic switched off by swinging boom upwards Boom can be bent into optimum position to suit the wearer
• Very robust with only two moving joints • Hidden fixings hinder tampering whilst allowing easy repairs • Full range of spare parts available • Noise cancelling microphone on flexible steel-reinforced boom • Steel core cable for extra strength • Soft comfortable cushions • Wide, smooth response for reduced listening fatigue
GREEN-GO DIGITAL INTERCOM SYSTEM HEADSETS
26-801
A range of headsets designed for use with Green-Go digital intercom devices, enabling users to get the best out of their intercom solution. HS200S - Single ear, 4 pin Female XLR, coiled cable HS200D - Dual ear, 4 pin Female XLR, coiled cable
5415
BEYERDYNAMIC HEADSETS DT 200 Series - Extremely low visual profile for improved ‘in-shot’ appearance, and great comfort for extended wearing. Acoustic isolation is excellent, and a choice of single/dual ear and dynamic/condenser microphone capsules is offered. Impedance 80 ohms per side.
56-4051
DT 790 Series - Combining excellent acoustic isolation and natural response monitoring with great comfort for extended wearing. A choice of dynamic or condenser microphone capsules, driver impedance and termination options are also offered.
CANFORD HEADPHONE BAG A padded bag suitable for all headphones and headsets (including Peltor and other large earcup designs). The hard-wearing, padded nylon fabric provides protection in transit. Hook and loop closure across the top. 16-347
International Sales: +44 (0)191 418 1133
| international@canford.co.uk
| canford.co.uk
HEADPHONES & IN-EAR MONITORS
CANFORD LEVEL LIMITED HEADPHONES
54-4045
DMH620 88dBA - Canford is a specialist provider of headphone limiter technology. We offer level limited headphones from stock, or can evaluate and limit your preferred headphone to enable employers to take the necessary precautions required to protect user’s hearing. •U sers may plug the headphones into any available outlet (subject to avoiding ‘loading’ programme circuits) • Users can not readily ‘bypass’ the protection limiting device, which are incorporated within the earcups • That audio performance up to the point of limiting operation should be minimally affected by the limiting devices • That devices should be available for the widest range of commercially available headphones and headsets
54-9001
CANFORD HEADPHONE HYGIENE COVERS These covers, made of a non-woven lightweight material, stretch over headphone and headset earpads with diameters 70mm – 100mm. Supplied packed in pairs in individual plastic envelopes.
CANFORD ON-THE-EAR EARPHONES OTE50 Earphone An elegant, stylish on-the-ear headphone designed for professional audio, mobile communications intercom and conference applications. Profiled for left ear fitting, fitted with high-quality Mylar earphone driver.
54-225
Suitable for conference listening, simultaneous translation or monitoring where in-ear devices are not suitable. Fitted with a stereo 3.5mm jack connector wired to sleeve and tip. Impedance 32 ohms.
THE SIDEKICK 3 IFB IN-EAR MONITORS Manufactured for the pro audio industry and in particular IFB (Interruptible foldback), these in-ear monitors are designed to provide the user with a comfortable monitoring option that is ‘not visible when worn in the ear’.
56-4341
New Micro Driver - the driver itself fits in the ear canal and provides a wider frequency response, in turn offering greater clarity and sound definition. Even more invisible - extremely small and an excellent alternative earpiece to earwigs and eliminates the need for acoustic tubes outside the ear. Comfortable & Lightweight - can be worn for 20-hour shifts with little-to-no fatigue. Kevlar reinforced cable - although very fine, the cable is super strong. Mono & Stereo versions available. 56-4343
2022
Contact:
UK Sales: +44 (0)191 418 1122
|
sales@canford.co.uk
56-4342
|
canford.co.uk