5204 CASSETTE TRANSCRIBER The 5204 cassette transcriber is designed for the replay of taped interviews recorded on the range of NEAL Interview Recorders. With its robust design, the 5204 is built to withstand the rigorous play, stop and rewind processes inherent in the transcribing process. The sophisticated three motor transport mechanism ensures the safest possible handling of your valuable cassettes.
Features Operation is simple - one touch buttons provide wind, forward, play and stop functions.
A backspace control is fitted to give a variable backspace between zero and three seconds when STOP is operated.
The interview and time announcement levels can be adjusted and mixed together using the voice and time slider controls. This can be monitored through the internal loudspeaker or through external headphones. If the user is given a cassette where the tape level is under-recorded there is sufficient gain available to provide the user with full output volume.
LED indicator shows interview time elapsed in minutes and seconds..
The 5204 Transcriber is supplied with a three position footswitch providing START / STOP, FAST FORWARD and REWIND functions.
If the tape on the interview cassette is too fast/slow to transcribe, the tape speed may be varied using the SPEED control.
One or two pairs of headphones can be plugged into the headphone sockets, automatically muting the loudspeaker. Either mono headphones with a 2 contact ¼” jack plug or stereo headphones with a 3 contact ¼” jack plug can be used in the headphone sockets.
Features: Tape Speed Head Format Frequency Response Signal to Noise Ratio Wow and Flutter Variable Speed Tape Counter Internal Loudspeaker Headphone Output
4.75 cm/sec (1f ips). 2 channel stereo. 300Hz to 10KHz ± 3dB. Better than -48dB (2 KHz Ref CCIR Arm). Better than 0.4% peak DIN weighted. -25% to +50% of nominal. 4 digit LED display reading minutes and seconds. 800 mW, disabled by inserting headphones plug. Two replay channels mixed to single audio output. 3V (+12dBm) at 10 ohms source impedance. Two 3 way gauge A 6.3mm jack sockets accepting 2 way or 3 way gauge A jack plug. Automatic Backspace Control Variable up to 3 seconds. Power Requirements Mains 220/240 V AC 50/60Hz 0,1A. Dimensions 240mm x 140mm x 250mm. Weight 5Kg approx.
Accessories: Lightweight Headphones (Code: 29-920) Three Position Footswitch (Code: 29-940 Stethoscope Headphones (Code: 29-922) Replacement Stethoscope Earpads- pkt10 (Code:29-923)
Other NEAL Products: Double CD Interview Recorders Triple CD Interview Recorders Networked Interview System Transcription and work Flow Software Cassette Interview Recorders, Transcribers and Copiers Accessories including: USB footpedals, headphones, remote monitoring systems
NEAL SALES CANFORD AUDIO LIMITED CROWTHER ROAD, WASHINGTON, TYNE & WEAR, NE38 0BW, UK tel: 0191 418 1199 fax: 0191 418 1100 sales@neal.co.uk www.neal.co.uk