EUROCAN Sales & Service Ltd
User Manual Linear Seamer
Copyright Š 2014 Eurocan Sales & Service Ltd. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, in any form or by any means, mechanical, photocopying, recording or otherwise, without the prior written consent of Eurocan Sales & Service Ltd. While every precaution has been taken in the preparation of this manual, Eurocan Sales & Service Ltd and the author assume no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. All product and company names are trademarks of their respective companies and licenses.
Eurocan Sales and Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Introduction
Thank you for purchasing a Eurocan can closing machine.
Eurocan has designed this machine to be durable and operator friendly, and to give reliable production. To ensure the machine meets all expectations, please read and comply with this instruction manual, which is an important resource for all personel involved in the operation, maintenance, lubrication and cleaning of the machine. The manual provides the information needed to safely operate and maintain the machine.
i Important tags mark information about the best way to operate the machine to maximise durability and production. It is important that all personnel read and understand the Safety section before operating the machine, and read all ! Caution notices about possible hazards before making adjustments or changes. For best performance of the machine, always use original Eurocan parts. For further support, and to order additional User Manuals or spare parts, please contact: Eurocan Sales & Service Ltd Unit B1 Newbrook Business Park Pound Lane, Upper Beeding BN44 3JD, U.K. Tel: +44 (0)1903 810110 Fax: +44 (0)1903 810222 Email: sales@eurocanltd.com
Eurocan Sales and Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Contents
Section
Title
1.0
Safety Information
2.0
Machine Overview
3.0
Specification
4.0
Installation
5.0
Set Up
6.0
Change Over Procedure
7.0
Operation
8.0
Maintenance
9.0
CE Declaration of Conformity
10.0
Assembly Drawings & Parts Lists
Eurocan Sales and Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
1.0 Safety Information MAKE SAFETY A DAILY HABIT Safety depends on everyone who operates, maintains, services or works nearby operating equipment. Personnel should NOT operate this machine until trained on its function and purpose: know and understand the principles of your equipment before operating it. Remember: an accident is usually caused by carelessness, neglect or oversight. Where machines are shown without guards this is for illustration purposes only. Throughout this manual are listed a number of safety precautions. Study them carefully and follow them, also insist upon those working for you doing the same. The following signal words are used to inform about potential hazards and proper machine usage.
i
Important
Identifies specific information that will assist with machine operation, prevent damage to the machine, or extend the life of machine parts
!
Caution
Alerts to a potential hazard that may result in personal injury, or an unsafe practice that causes damage to the equipment if not avoided
Installation Only trained machinery movers, using appropriate and well-maintained equipment, should handle, move and install the machine. Please refer to the Installation chapter in this manual for complete instruction and safety information. Guards Guards are supplied with the machine and must be in place before operation begins. NEVER bypass or disconnect safety switches. Doing so could greatly increase the chance for personal injury. Guards are installed to protect personnel working on or around the machine. Guards MUST be closed when the machine is operating. Safety switches are located on each guard. If a guard is opened while the machine is running, the machine stops. Never reach over or into moving machinery with hands, rags or any tools. Guard design is based on level machine footings that are even with the work area. Raising the machine or using platforms, staircases, stools or ladders near the machine creates hazardous operating conditions. Guards shield personnel from moving parts. Reaching over, under or through a guard, blocking it open, or tampering with a guard interlock is EXTREMELY hazardous and must NEVER be attempted. Guards should NEVER be altered from factory setup.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Work with special care when guards are removed for lubrication, adjustment and part replacement. All guards should be reinstalled correctly immediately following maintenance or repair. Opening a guard DOES NOT disconnect electrical power in the control cabinet. To disconnect control power, padlock the main disconnect in the OFF position. Machine Location The machine location must provide sound footing, adequate lighting and accessibility from all sides. DO NOT install the machine in a combustible environment or near combustible or explosive material. DO NOT smoke, solvent gasses are inflammable. Keep the area around the machine clean and free of obstacles to avoid injuries due to falls.
Nip & Pinch Points Be EXTREMELY careful when working near nip points and pinch points. Keep body parts, hair, neckties, clothing, and tools away from these hazards to prevent serious injury or death. DO NOT wear rings, watches or necklaces near the machine. All notices, labels, and plates must be in place and legible. Immediately replace damaged or missing labels and notices. Contact Eurocan Sales & Service Ltd for replacement notices, labels, and plates. Electrical A qualified electrician must install and repair electrical equipment and verify electrical ground. Complete electrical information is provided in the Electrical System section of this manual. ALWAYS padlock the electrical disconnect in the OFF position before adjusting, cleaning, lubricating or maintaining the machine. DO NOT make revisions or additions to the programmable controller. This impairs the operation of the machine. NEVER use jumper wires to bypass electrical circuits. Doing so may activate parts of the machine which could cut, crush or seriously injure persons in the immediate area. Modifications or additions to the electrical system causes machine malfunction and creates safety hazards for personnel. Always stop the drive motor before servicing. Be certain that the power cannot be turned on again without your knowledge. Specific lubrication instructions are located in the Maintenance section of this manual. •
Lubricate manual fittings BEFORE operation.
•
Verify lubrication system is operational.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
2.0 Machine Overview
The Linear Seamer is an all stainless steel modular can closing machine designed as a cost effective solution for low speed can making and canning applications. The first seamer in the world to be designed with a straight line can transfer system, the Linear Seamer can be supplied with one to six seaming heads for production speeds of up to 100 cans per minute. The modular seaming head, based on a well proven design, produces consistent food quality double seams as a result of the high number of 1st and 2nd operation can revolutions unique to this design. Cans are fed into the machine via a timing spiral and pitched onto a stainless steel horizontal feed chain with a servo motor drive system. As a can comes to rest under the seaming head, the pneumatically actuated lifter raises the can up through the pocket of the end feed turret to pick up the end and clamp it on the seaming chuck. Each seaming head has a dedicated end feed unit and transfer turret which is pneumatically indexed in sequence with the can feed chain. Compatible with tinplate, aluminium, paperboard or plastic cans and ends, the Linear Seamer is offered for vacuum, nitrogen gassing, vacuum and gassing, and standard atmospheric can closing applications.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
3.0 Specification
Model number
Output Can diameter range Can height range
110G single head automatic nitrogen gassing seamer
Maximum 15 cans per minute 30 – 155 mm 50 – 300 mm
Air Pressure Seaming machine Indexing unit resistor
Weight
80 PSI 40 PSI
740 kg
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Dimensions
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
4.0 Installation Machine Delivery When the machine arrives, inspect the entire shipment for damage. If you find any damage please note this on the carrier delivery receipt, and send delivery details and a photograph of the damage to logistics@eurocanltd.com. • • •
Use competent machinery movers when the machine arrives. Confirm the weight of the machine. Study the mass and weight distribution of the machine.
Prepare Site Select the machine site carefully. The structure must support the machine and production activities. The area should be well lit for operator efficiency and accessible from all sides for service, maintenance and operation. The area should also have appropriate electrical and compressed air connections available.
Lift & Move the Machine
!
Caution
• • • • • • •
i
When lifting or moving the machine adhere to the following guidelines to prevent harm to personnel or machinery:
Use the specified lifting points. Damage resulting from incorrect lifting may require the machine be returned to the manufacturer for repair at the customer’s expense. Handling, moving and installation should be done only by trained machinery movers using appropriate equipment. Use equipment with adequate capacity. Prevent anyone from walking, crawling, or reaching under the machine while it is solely supported by a forklift or other device. Keep hands and feet clear of the machine, platform, or pallet base and the wheels of the lifting equipment. Watch for overhead utility lines, low clearances, and other obstructions. Before lifting the machine, remove all unsecure items, blocks and fasteners from the pallet base.
Important 1. 2. 3. 4.
When lifting the machine a fork lift or pallet truck is required.
Position the lift truck at the front of the machine with lifting forks low to the ground. Move the lifting forks underneath the cross members of the machine frame. Slowly lift the machine with care. A sudden jar, such as that caused by allowing the machine to drop from rollers under skids, may affect the alignment of parts. Remove pallet base.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
5. 6.
Lower and position machine onto floor pads. Remove lifting forks.
Install the Machine Position the seamer assembly and level it. Level the table assembly. Secure the seamer assembly to the table assembly. Set the lifter plate height. Connect the Air Supply Supply clean dry air and use pipe that is at least the size of the inlet. The air pressure required for the machine is 80 PSI and the indexing unit resistor requires a separate air supply of 40 PSI.
i
Important
The exact air consumption may vary slightly. Consumption depends on model, speed, and auxiliary equipment.
Prepare the Machine for Work
i
Important
The machine is adjusted and checked at the factory, but it is absolutely necessary to check all the adjustments described in the Set Up section of the manual before operating the machine.
Thoroughly clean the machine to remove any dust and dirt which has accumulated during transportation.
Connect the Power Supply to the Main Cabinet A fused disconnect must be provided for the machine. The PLC in the machine requires an isolated, clean voltage power source. The electrical control system will have been configured to your stated factory specification at time of placing order.
!
Caution
External power MUST be wired through the bottom of the electrical enclosure. This eliminates the possibility of metal chips coming in contact with the components, possibly causing sparks, shock or machine damage
Machines are pre-wired. Check the plate on the electrical cabinet for the exact power requirements. A labelled terminal is provided in the electrical enclosure for this connection. If further assistance is needed, contact Eurocan.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
5.0 Set Up 5.1 Remove seaming head guard Undo the socket head cap screws retaining the guard.
Tilt the guard forward and down, and slide it off.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
5.2 Set pin height Place a can on the lifter plate without an end component. Release the seaming head clamp screws.
Use the hand wheel to raise or lower the seaming head until the top of the chuck lift face is 1 mm below the can flange.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Tighten the seaming head clamp screws.
5.3 Set 1st operation seaming roll Attach the supplied handle to the driven pulley.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Rotate handle while manually pressing the trigger arm.
Continue to rotate until the 1st operation seaming cam roller is positioned on the 1st operation cam profile as in the picture below.
Pull back the trigger arm.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Insert a screwdriver between the body of the 1st operation seaming roll and seaming chuck.
Undo the hexagon setscrew.
Undo the lock nut on the 1st operation seaming roller adjusting screw.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Refer to your double seam data sheet for the 1st operation seaming roll setting dimension, and use feeler gauges to this value in between the 1st operation roll body and the chuck body.
Turn the adjusting screw to move the 1st operation roll in or out until the feeler gauges are a tight slide fit.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Re-tighten the lock nut on the 1st operation seaming roller adjusting screw.
Re-tighten the hexagon setscrew.
5.4 Set 2nd operation seaming roll
Rotate handle while manually pressing the trigger arm.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Continue to rotate until the 2nd operation seaming cam roller is positioned on the 2nd operation cam profile as in the picture below.
Pull back the trigger arm.
Insert a screwdriver between the body of the 2nd operation seaming roll and seaming chuck.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Undo the hexagon setscrew.
Undo the lock nut on the 2nd operation seaming roller adjusting screw.
Use feeler gauges to set the position of the 2nd op seaming roll to the chuck.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Re-tighten the lock nut on the 2nd operation seaming roller adjusting screw.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Re-tighten the hexagon setscrew.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
6.0 Change Over Procedure 6.1 Seaming chuck Use the pin spanner provided.
Locate the pin spanner in the hole on the seaming chuck boss.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Use a soft mallet to tap the pin spanner and loosen the seaming chuck.
Turn the driven pulley handle to rotate the chuck shaft.
Use your other hand to support the seaming chuck.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Reverse the procedure to fit the new seaming chuck.
6.2 Seaming roll assembly Locate the pin spanner in the hole on the seaming roll pin boss. Loosen the seaming roll pin lock nut.
Withdraw the seaming roll assembly through the hole in the seaming roller arm. Reverse the procedure to fit a new seaming roll assembly.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
6.3 Change lifter spring
Remove the lifter plate.
Use the magnetic pick up tool supplied to extract the pressure cap.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Use the magnetic pickup tool again to remove the lifter spring and holder.
Drop in the new lifter spring, and replace the pressure cap and the lifter plate.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
7.0 Operation Human Machine Interface (HMI)
Home Screen
RUN STOP RIGHT ARROW MAN
Start machine running in automatic mode Stop machine running in automatic mode Go to set up screen Go to manual functions screen
Error Messages Error
Action
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Set Up
START SEAMER RUN STOP
Run seaming head independently Start machine in automatic mode (duplicate of ‘RUN’ on home screen) Stop machine in automatic mode (duplicate of ‘STOP’ on home screen)
Command
Function
Default Value
TURRET INDEX DWELL
Pause time of indexing turret at end of each index
0.10
LID FEED DWELL
Pause time of lid feed cylinder at end of stroke
0.02
LIFT UP TIME
Pause time of lifter cylinder
0.20
SEAMER TRIG
Energise time of seamer trigger cylinder
2.00
SEAMER DWELL
Pause time for seam operation to complete
2.00
LIFT DOWN TIME
Delay to allow can to lower before chain starts
0.20
CAN POSITION
Delay to ensure can is in position at seamer
0.25
NO CAN RECYCLE TIME
Pause time if no can detected
0.25
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
LEFT ARROW RIGHT ARROW
Return to Home Go to Machine Adjustments screen
As an aid in diagnosing problems, the Command text boxes change colour when the function is active. If the machine stops unexpectedly, the colour of the box can quickly direct you to a possible cause.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Machine Adjustments
SINGLE CAN
Cycles machine until a can is moved into position. The can is lifted, seamed and lowered, but the machine then pauses until the SINGLE SHIFT button is pressed. The seamed can is then moved to the next position and stops. Note: if the chain is empty and a can is fed from the scroll, the machine cycles normally until the can reaches the seaming position.
SINGLE SHIFT
Start machine to index one position and complete one seaming cycle
STOP
Stop machine
NO CAN CYCLES
Set maximum cycles without cans before machine stops
JOG TIME
Set the jog time used in ‘MANUAL’ mode only, in seconds
LEFT ARROW
Return to previous screen
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
The above illustrates the display when the NO-CAN CYCLES number button is touched to amend the value. The numeric keypad shows the new value being entered, together with the maximum and minimum values allowed for the parameter. To delete a figure, press ‘Clr’. To abandon an entry and leave the original value, press ‘Esc’. To confirm the entry, press ‘Enter’.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Manual Functions
START SEAMER
Run seaming head independently
JOG CHAIN REV
Jog infeed spiral and chain in reverse *
JOG CHAIN FORWARD
Jog infeed spiral and chain forwards *
SEAMER TRIG
Actuate the seaming head trigger cylinder
LID FEED
Actuate the end feed magazine cylinder
SERVO ENABLE
Enable the servo drive*
CAN LIFT
Press once to actuate the can lifter cylinder. Press again to lower
TABLE INDEX
Press once to extend the indexing turret cylinder, press again to retract it
SERVO RESET
Press to reset the servo drive controller
RIGHT ARROW
Return to previous screen
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
i
Important
* Manual operation (jog infeed spiral and chain) of the servo drive is only possible by first enabling the servo drive. Each press of JOG CHAIN FWD. or JOG CHAIN REV. moves the chain for a short time. The time is set on the Machine Adjustments screen as JOG TIME.
i
Important
Although this screen can be displayed at any time, the buttons are ‘grey', indicating not operational, unless the machine is STOPPED.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
8.0 Maintenance & Cleaning !
Caution
Isolate the power supply from the machine before cleaning, lubricating or carrying out repairs
i
Important
Keep the work table of the machine permanently and perfectly clean
8.1 Cleaning Guidelines for Wash Down The preferred cleaning method is to wipe down the machine or to blow off with compressed air. Follow the recommendations and instructions below to help prevent problems in environments where machinery is exposed to water during clean up:
!
Caution
To avoid injury, all power to the machine must be OFF before starting wash down DO NOT apply the water stream directly on electrical components Water pressure used to rinse the machine should be regulated to 5 psi maximum Use open ended hose only Use neutral cleaning solution (pH 6-8)
1.
Turn off all power to the machine. Use appropriate lockout procedures.
2.
Ensure all openings to the electrical panel are sealed.
3.
Cover all electrical enclosures, user interface and all motors with plastic or suitable material before using any water on the machine.
4.
Apply cleaning solution.
5.
Use a soft brush or a plastic scraper to remove heavy deposits.
6.
Rinse with clean water.
7.
Remove excess water.
8.
Allow machine to dry.
9.
Remove plastic covers from electrical components.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
10.
Restore power to the machine.
8.2 Lubrication
!
Caution
Isolate the power supply from the machine before lubricating
i
Important
Clean the machine before lubricating Only use recommended lubricants
For operation in a dry fill production environment we recommend that all grease points are lubed after 12 hours of intermittent or continuous production. In a wet fill environment all grease points should always be lubed immediately after the machine has been washed and cleaned.
Lubrication Points Chuck Spindle
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Lifter Spindle & Bush Housing
Seaming Lever Spindle / Lower Chuck Spindle Bearing
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
Seaming Lever Spindle
Recommended Lubricants During manufacture the seamer is lubricated using Castrol Obeen FS 2 food grade grease. You should use this lubricant for maintenance, or the equivalent grade of lubricant from an alternative reputable manufacturer.
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
9.0 CE Declaration of Conformity
EC Declaration of Conformity
04 November 2014
Machine Model
110G Linear Seamer
Machine Serial Number
8633
EC Directives Complied With
Machinery Directive 2006/42/EC Low Voltage Directive 2006/95/EC Electromagnetic Compatibility Directive 2004/108/EC
Name and Address of Approved Body & Other Details, If Appropriate
Transposed Harmonised Standards Used
EN ISO 13849-2:2012 EN 1SO 12100:2010 EN ISO 13850:2008 EN 1037:1995 + A1:2008 EN ISO 4414:2010 EN 60204-1:2006 + A1:2009 EN 61000-6-2:2005 EN 61000-6-4:2007 + A1:2011
We declare that the above machinery conforms with the relevant essential Health and Safety Requirements.
John P. Jenner, Director
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
10.0 Assembly and Parts Lists 900643 900661 900696 900701 900702 900737 900772 900779 900802 900805 900808 900812 900813 900839 900847 900848 900851 900854 900911 900912 900937 900946 900947 900958 901002 901073 901075 901079 901085 901090 901094 901096 901098 901101
Seaming Head Frame Assembly Seaming Head Assembly Seaming Roll Assembly Indexing Head Assembly Indexing Head Anti-reverse Assembly End Feed Assembly Pneumatic Lifter Assembly Pneumatic Trigger Assembly Can Lifter Plate Assembly Seaming Head Drive Assembly Knockout Assembly Seaming Head Guard Assembly Main Guard Enclosure Assembly Model 200 Table Assembly Lifter Ring Assembly Driven Sprocket Assembly Idling Sprocket Assembly Discharge Sprocket Assembly Can Infeed Spiral Assembly Model 200 Can Guide Rail Assembly Timing Disc Assembly Seamer Support Stand Assembly End Feed Turret Gas Flush Assembly Take-Off Drive Sprocket Assembly Indexing Head Dampening Assembly Model 200 Transfer Chain Assembly Model 200 Chain Support Track Assembly Servo Motor Drive Assembly 100 Series Electrical Control System Assembly Front Guard Assembly Guard Side Panel RH Assembly Guard Side Panel LH Assembly Folding Doors Assembly Guard Upper RH Assembly
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
901105 901108 901113 901118 8633 T3265 8-27
Guard Upper LH Assembly Guard Inside Panels Assembly Model 100 Series Pneumatic Assembly Lifter Blanking Plate Assembly Change Parts 89 mm diameter Container Specification Lid Specification
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email@ sales:eurocanltd.com www.eurocanltd.com
6(7 83 )25 00 &$1
4 $
0)*
$339 '
&+. '
'5$:1
$48,/$
1$0(
'$7(
$3+
),1,6+
0$7(5,$/
:(,*+7
6(( 3$57 /,67
'(%85 $1' %5($. 6+$53 ('*(6
'(6&5,37,21 6($0,1* +($' )5$0( 6($0,1* +($' &/$03 %/2&. 5 + 6($0,1* +($' &/$03 %/2&. / + 6($0,1* +($' *8,'( 5 + 6($0,1* +($' *8,'( / + 6($0,1* +($' &(175$/ *8,'( /($'6&5(: /($'6&5(: &$3 /($'6&5(: &$3 5(7$,1(5 /($'6&5(: 187 +$1':+((/ +$1':+((/ *5,3 +(;$*21 +($' %2/7 :$6+(5 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: '2:(/ 3,1 '2:(/ 3,1 '2:(/ 3,1 62&.(7 +($' &2817(5681. 6&5(:
6,*1$785(
81/(66 27+(5:,6( 63(&,),(' ',0(16,216 $5( ,1 0,//,0(7(56 685)$&( ),1,6+ 72/(5$1&(6 /,1($5 $1*8/$5
,7(0 180%(5
5(9,6,21
6&$/(
6+((7 2)
6($0,1* +($' )5$0( $66(0%/< $ ':* 12
7,7/(
'2 127 6&$/( '5$:,1*
47<
3$57 180%(5
4 $
0)*
$339 '
&+. '
'5$:1
$48,/$
1$0(
),1,6+
$3+
6,*1$785(
81/(66 27+(5:,6( 63(&,),(' ',0(16,216 $5( ,1 0,//,0(7(56 685)$&( ),1,6+ 72/(5$1&(6 /,1($5 $1*8/$5
'$7(
0$7(5,$/
:(,*+7
6(( 3$57 /,67
'(%85 $1' %5($. 6+$53 ('*(6
5(9,6,21
6&$/(
6+((7 2)
6($0,1* +($' )5$0( $66(0%/< ':* 12
7,7/(
'2 127 6&$/( '5$:,1*
$
Assembly Number
900643
Assembly Name
Seaming Head Frame Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900645
Seaming head frame
1
2
900648
Seaming head clamp block RH
1
3
900823
Seaming head clamp block LH
1
4
900644
Seaming head guide RH
1
5
900824
Seaming head guide LH
1
6
900825
Seaming head central guide
1
7
900651
Leadscrew
1
8
900652
Leadscrew cap
1
9
900653
Leadscrew cap retainer
1
10
900654
Leadscrew nut
1
11
200208
Handwheel
1
12
200209
Handwheel Grip
1
13
200149
Hexagon head bolt
4
14
200154
Washer
4
15
200175
Socket head cap screw
8
16
200152
Socket head cap screw
2
17
200210
Socket Head Cap Screw
2
18
200119
Socket head cap screw
5
19
200211
Dowel Pin
8
20
200212
Dowel Pin
2
21
200130
Dowel pin
2
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Assembly Number
900643
Assembly Name
Seaming Head Frame Assembly
Item Number Part Number
22
200143
Part Name
Quantity per Assembly
Socket head countersunk screw
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
1
6(7 83 )25 00 &$1
4 $
0)*
$339 '
&+. '
'5$:1
$48,/$
1$0(
'$7(
6,*1$785( $3+
81/(66 27+(5:,6( 63(&,),(' ',0(16,216 $5( ,1 0,//,0(7(56 685)$&( ),1,6+ 72/(5$1&(6 /,1($5 $1*8/$5
),1,6+
:(,*+7
0$7(5,$/
6&$/(
':* 12
7,7/(
5(9,6,21
6+((7 2)
6($0,1* +($' $66(0%/<
'2 127 6&$/( '5$:,1*
6(( &+$1*( 3$576
47<
'5$:,1* 180%(5
'(%85 $1' %5($. 6+$53 ('*(6
6(( 3$57 /,67
6+$)7 :$6+(5 1(('/( 52//(5 &$*(
'(6&5,37,21 6($0,1* +($' )5$0( $66(0%/< &$1 /,)7(5 3/$7( $66(0%/< 1' 23(5$7,21 52//(5 $'-867,1* 6/((9( 67 23(5$7,21 52//(5 $'-867,1* 6/((9( &+8&. 6+$)7 6/((9( &+8&. 6+$)7 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 2,/,7( %($5,1* 2,/,7( %($5,1* 67 23 52//(5 $'-867,1* $50 52//(5 $50 :$6+(5 &$0 52//(5 '2:(/ 3,1 67 23(5$7,21 52//(5 $'-867,1* 6+$)7 1' 23(5$7,21 52//(5 $'-867,1* 6+$)7 3$:/ 63,1'/( 723 3$:/ %27720 3$:/ 6($0,1* &+8&. %$// %($5,1* &+8&. 6+$)7 %($5,1* %86+ 6($0,1* &$0 &$0 '5,9( 6352&.(7 &$0 :$6+(5 $'-867,1* 6&5(: 187 (;7(51$/ &,5&/,3 +(;$*21 6&5(: 52//(5 $50 6+$)7 3,1 635,1* $1&+25 3,1 :$6+(5 62&.(7 +($' &$3 6&5(: &+$,1 7(16,21 635,1* (&&(175,& %86+ &+8&. 6+$)7 %86+ /2&. 187 7$% :$6+(5 52//(5 $'-867,1* /(9(5 6($0,1* 52// $66(0%/< 52//(5 $50 723 :$6+(5 1' 23 52//(5 $'/867,1* $50 +286,1* :$6+(5
,7(0
$
%
$
%
6(&7,21 $ $
$
4 $
0)*
$339 '
&+. '
'5$:1
$48,/$
1$0(
),1,6+
6,*1$785(
81/(66 27+(5:,6( 63(&,),(' ',0(16,216 $5( ,1 0,//,0(7(56 685)$&( ),1,6+ 72/(5$1&(6 /,1($5 $1*8/$5
'$7(
0$7(5,$/
:(,*+7
6(( 3$57 /,67
'(%85 $1' %5($. 6+$53 ('*(6
6(&7,21 % %
6&$/(
':* 12
7,7/(
5(9,6,21
6+((7 2)
6($0,1* +($' $66(0%/<
'2 127 6&$/( '5$:,1*
$
Assembly Number
900661
Assembly Name
Seaming Head Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900643
Seaming head frame assembly
1
2
900802
Can lifter plate assembly
1
3
900668
2nd op roller adjusting sleeve
1
4
900659
1st op roller adjusting sleeve
1
5
900666
Chuck shaft sleeve
1
6
900667
Chuck shaft
1
7
200152
Socket head cap screw
6
8
200120
Socket head cap screw
3
9
200119
Socket head cap screw
1
10
200132
Oilite bearing
4
11
200131
Oilite bearing
1
12
900660
1st op roller adjusting arm
1
13
900726
Roller arm washer
2
14
200137
Cam roller
2
15
200214
Dowel pin
2
16
900662
1st op roller adjusting shaft
1
17
900663
2nd op roller adjusting shaft
1
18
900722
Pawl spindle
1
19
900720
Top pawl
1
20
900721
Bottom pawl
1
21
0001
Seaming Chuck
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Assembly Number
900661
Assembly Name
Seaming Head Assembly
Item Number Part Number
Part Name
Quantity per Assembly
22
200215
Ball Bearing
1
23
900655
Chuck shaft bearing bush
1
24
900656
Seaming cam
1
25
900669
Cam drive sprocket
1
26
900728
Cam washer
1
27
200216
Adjusting Screw
2
28
200142
Nut
2
29
200221
External Circlip
1
30
200163
Heaxagon Set Screw
2
31
900729
Roller arm shaft pin
2
32
900730
Spring anchor pin
2
33
200217
Washer
2
34
200145
Socket head cap screw
2
35
200151
Roller chain
1
36
200133
Tension spring
1
37
900725
Eccentric bush
1
38
900822
Chuck shaft bush
1
39
200218
Lock Nut
1
40
200219
Tab Washer
1
41
900665
Roller adjusting lever
2
42
900696
Seaming roll assembly
2
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Assembly Number
900661
Assembly Name
Seaming Head Assembly
Item Number Part Number
Part Name
Quantity per Assembly
43
900727
Roller arm top washer
2
44
900764
2nd op roller adjusting arm
1
45
200172
Housing Washer
2
46
200173
Shaft Washer
2
47
200174
Needle Roller Cage
2
48
901089
Chuck shaft bush
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
3
4
2
1
1
6
6
QTY. 1 1 1
A
6
SECTION A-A
5
A
5
4
1
2
3
7
7
8
8
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
DATE
USE HOOK WRENCH 40 Z 45-50 TO ASSEMBLE ROLL PIN TO ROLL PIN LEVER ARM
9
MATERIAL:
10
DEBUR AND BREAK SHARP EDGES
TITLE:
DO NOT SCALE DRAWING
11
REVISION
PRELIMINARY
12
C
B
A
6
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
SIGNATURE
17/05/12
WEIGHT:
SEE ITEM LIST SCALE:1:1
DWG NO.
SHEET 1 OF 1
SEAMING ROLL ASSEMBLY 900696
A2
G
G
H
F
F
5
E
2
CIRCLIP - INT0400
4
E
1
900698 Springmasters Internal Circlip INT0400
DESCRIPTION SEAMING ROLL SEAMING ROLL PIN M20 x 1.5 LOCKNUT ANGULAR CONTACT BALL BEARING, DOUBLE ROW, SEAL ON BOTH SIDES SEAMING ROLL PIN END CAP
3
D
6
5
ITEM NO. PART NUMBER 1 900699 2 900697 3 M20 x 1.5 Locknut 3203_A_2RS1TN9_MT 4 33HIHI
2
D
C
B
A
1
Assembly Number
900696
Assembly Name
Seaming roll assembly
Item Number Part Number
1
900699
1
0002 / 0003
2
Part Name
Quantity per Assembly
2nd Operation Seaming Roll
1
Seaming Roll
2
900697
Seaming roll pin
1
3
200134
Lock Nut
1
4
200160
Ball bearing
1
5
900698
Seaming roll pin end cap
1
6
200161
Internal Circlip
2
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
0 ;
0 ;
0 ;
6RFNHW +HDG &DS 6FUHZB$0
6RFNHW +HDG &DS 6FUHZB$0
6RFNHW +HDG &DS 6FUHZB$0
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
,7(0 12
47<
$
$
6(&7,21 $ $
4 $
0)*
$339 '
&+. '
'5$:1
$48,/$
1$0(
),1,6+
6,*1$785(
81/(66 27+(5:,6( 63(&,),(' ',0(16,216 $5( ,1 0,//,0(7(56 685)$&( ),1,6+ 72/(5$1&(6 /,1($5 $1*8/$5
'$7(
:(,*+7
0$7(5,$/
6(( ,7(0 /,67
'(%85 $1' %5($. 6+$53 ('*(6
6&$/(
':* 12
7,7/(
5(9,6,21
6+((7 2)
$
5(/($6('
,1'(;,1* +($' $66(0%/<
'2 127 6&$/( '5$:,1*
Assembly Number
900701
Assembly Name
Indexing Head Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900703
Turret support shaft
1
2
900704
Bearing block
1
3
900707 Rev 1
Indexing shaft
1
4
900706
Drive sprocket
1
5
900712 Rev 1
Indexing lever
1
6
900708
Upper friction plate
1
7
900709
Friction ring
1
8
900710
Lower friction plate
1
9
900711
Indexing arm
1
10
200184
Bush
1
11
900714
Tension dog
1
12
900716
Stud
1
13
900717
Collar
1
14
200183
Inner Ring
1
15
900705
Drive collar
1
16
900718
Stud
1
17
200185
Dowel Pin
1
18
200186
Dowel Pin
1
19
200187
Taper pin
1
20
200120
Socket head cap screw
7
21
200109
Socket head cap screw
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Assembly Number
900701
Assembly Name
Indexing Head Assembly
Item Number Part Number
Part Name
Quantity per Assembly
22
200188
Disc spring
21
23
200189
Nut
1
24
200190
Ball Bearing
1
25
200191
Ball Bearing
1
26
200192
Washer
1
27
200193
Roller Bearing
1
28
200171
Oilite Bearing
3
29
200170
Oilite Bearing
1
30
200194
Washer
6
31
200142
Nut
6
32
200196
Circlip
1
33
200128
Torsion spring
1
34
900702
Indexing head anti-reverse assembly
1
36
200230
SSDP 8mmx60mm Stainless steel dowel
1
37
900837
Indexing Cylinder Mounting Plate
1
38
900838
Pin location plate
1
39
200231
Pneumatic cylinder assembly
1
40
200225
Internal Circlip
2
41
200156
Socket head cap screw
4
42
200244
Socket Head Cap Screw
2
43
200245
Socket Head Cap Screw
4
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
,7(0 12
3$57 180%(5 ,WHP ,WHP 6RFNHW +HDG &DS 6FUHZB$0 6RFNHW +HDG &DS 6FUHZ 0 [ 6SULQJPDVWHUV 560 7RUVLRQ 6SULQJ
0 ;
( 7<3( &,5&/,3
47<
'(6&5,37,21 63/,7 3/$7( 7(16,21 '2* 7(16,21 3/$7( 678' (&&(175,& %86+
4 $
0)*
$339 '
&+. '
'5$:1
$48,/$
1$0(
),1,6+
6,*1$785(
81/(66 27+(5:,6( 63(&,),(' ',0(16,216 $5( ,1 0,//,0(7(56 685)$&( ),1,6+ 72/(5$1&(6 /,1($5 $1*8/$5
'$7(
:(,*+7
0$7(5,$/
6(( ,7(0 /,67
'(%85 $1' %5($. 6+$53 ('*(6
5(9,6,21
6&$/(
6+((7 2)
$
35(/,0,1$5<
,1'(;,1* +($' $66(0%/< ':* 12
7,7/(
'2 127 6&$/( '5$:,1*
Assembly Number
900702
Assembly Name
Indexing Head Anti-reverse Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900713
Split plate
1
2
900714
Tension dog
1
3
900715
Tension plate
1
4
900763
Eccentric Stud
1
5
200184
Bush
1
6
200120
Socket head cap screw
1
7
200198
Socket Head Cap Screw
2
8
200196
Circlip
1
9
200127
Torsion spring
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
,7(0 12
$
'5$:,1* 12 '(6&5,37,21 6HH &KDQJH 3DUWV 723 (1' )((' 3/$7( 723 )((' %$5 3/$7( 6HH &KDQJH 3DUWV (1' )((' 5,1* +(,*+7 $'-867,1* 6/((9( 6/((9( 723 3/$7( &</,1'(5 02817,1* 3/$7( 6HH &KDQJH 3DUWV (1' )((' %27720 3/$7( )5217 63$&,1* 3/$7( 6,'( 63$&,1* 3/$7( +(,*+7 $'-867,1* 6+$)7 &5266 %$5 63/,7 %/2&. 6833257 3/$7( 6+$)7 .(<:$< %/2&. 6+$)7 .(< 6/((9( :$6+(5 6/((9( 5($5 3/$7( 6+$)7 %27720 3/$7( 6/((9( )5217 3/$7( /+ &87 2)) .1,)( 5+ &87 2)) .1,)( /+ 6(3$5$7,1* %$5 5+ 6(3$5$7,1* %$5 5($5 :($5 3$' )5217 :($5 3$' 31(80$7,& &</,1'(5 +$1':+((/ )/$1*(' %521=( 187 2,/,7( %($5,1* 6:,9(/ (/%2: $'$3725 )25 31(80$7,& &</,1'(5 )/$1*( )25 31(80$7,& &</,1'(5 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 0 ; 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &2817(5681. 6&5(: 62&.(7 +($' &2817(5681. 6&5(: 62&.(7 %87721 +($' 6&5(: 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: :$6+(5 :$6+(5 :$6+(5 187 (1' )((' 67$&. 52'
47<
6(&7,21 $ $
6(&7,21 % %
%
%
$
4 $
0)*
$339 '
&+. '
'5$:1
$48,/$
1$0(
),1,6+
6,*1$785(
81/(66 27+(5:,6( 63(&,),(' ',0(16,216 $5( ,1 0,//,0(7(56 685)$&( ),1,6+ 72/(5$1&(6 /,1($5 $1*8/$5
'$7(
:(,*+7
0$7(5,$/
6(( 3$57 /,67
'(%85 $1' %5($. 6+$53 ('*(6
5(9,6,21
6&$/(
':* 12
6+((7 2)
$
(1' )((' $66(0%/<
7,7/(
'2 127 6&$/( '5$:,1*
Assembly Number
900737
Assembly Name
End Feed Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
0007
Top end feed plate
1
2
900739
Top Feed Bar Plate
1
3
0008
End Feed Ring
1
4
900741
Height adjusting sleeve
1
5
900742 Rev4
Sleeve top plate
1
6
900743
Cylinder mounting plate
1
7
0009
End feed bottom plate
1
8
900745
Front Spacing Plate
1
9
900746
Side Spacing Plate
2
10
900747
Height adjusting shaft
1
11
900748
Cross bar (cost does not include material)
1
13
900750
Support plate
1
14
900751
Shaft Keyway Block
1
15
900752
Shaft Key
1
16
900753
Sleeve Washer
1
17
900754
Sleeve rear plate
1
18
900755
Shaft Bottom Plate
1
20
900757
LH cut-off knife
1
21
900758
RH cut-off knife
1
22
900759
LH separating bar
1
23
900760
RH separating bar
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Assembly Number
900737
Assembly Name
End Feed Assembly
Item Number Part Number
Part Name
Quantity per Assembly
24
900761
Rear wear pad
2
25
900762
Front wear pad
2
26
200112
Pneumatic cylinder
1
27
200180
Handwheel
1
28
200179
Flanged bronze nut
1
29
200181
Oilite bearing
1
30
200113
Swivel elbow adaptor for pneumatic cylind
1
31
200114
Flange for pneumatic cylinder
1
32
200115
Socket head cap screw
2
33
200109
Socket head cap screw
4
34
200116
Socket head Cap Screw
4
35
200360
Socket head cap acrew
1
36
200118
Socket head cap screw
2
37
200119
Socket head cap screw
7
38
200120
Socket head cap screw
12
39
200152
Socket head cap screw
12
40
200122
Socket head cap screw
2
41
200123
Socket head cap screw
6
42
200124
Socket head countersunk screw
10
43
200125
Socket head countersunk screw
8
44
200126
Socket button head screw
6
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Assembly Number
900737
Assembly Name
End Feed Assembly
Item Number Part Number
Part Name
Quantity per Assembly
45
200120
Socket head cap screw
8
46
200227
Socket head cap screw
2
47
200228
Washer
2
48
200229
Washer
1
49
200246
Washer
8
50
200247
Nut
8
51
900923
End feed stack rod
3
52
901080
End low level sensor bracket
1
53
901081
End present sensor bracket
1
54
901082
End present sensor bracket
1
55
200241
Socket Head Cap Screw
5
56
200148
Socket set screw
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
/,)7(5 6+$)7 5()
3$57 180%(5
,7(0 180%(5
'$7(
/,)7(5 6+$)7 6/((9( )25 31(80$7,& &</,1'(5
4 $
0)*
$339 '
&+. '
'5$:1
$48,/$
1$0(
),1,6+
6,*1$785(
81/(66 27+(5:,6( 63(&,),(' ',0(16,216 $5( ,1 0,//,0(7(56 685)$&( ),1,6+ 72/(5$1&(6 /,1($5 $1*8/$5
:(,*+7
0$7(5,$/
/,)7(5 :$6+(5
2,/,7( %($5,1*
&,5&/,3 31(80$7,& &</,1'(5
62&.(7 +($' &$3 6&5(:
63/,7 7+5($'(' %86+
&</,1'(5 52' 3,1
47<
3$57 '(6&5,37,21 63/,7 %/2&. )25 31(80$7,& &</,1'(5
6(( ,7(0 /,67
'(%85 $1' %5($. 6+$53 ('*(6
6&$/(
':* 12
7,7/(
5(9,6,21
6+((7 2)
31(80$7,& /,)7(5 $66(0%/<
'2 127 6&$/( '5$:,1*
$
5(/($6('
Assembly Number
900772
Assembly Name
Pneumatic Lifter Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900767
Split Block for Pneumatic Cylinder
1
2
900768
Split threaded bush
1
3
900770
Lifter shaft sleeve pneumatic lift
1
4
900771
Cylinder Rod Pin
1
5
200175
Socket head cap screw
2
6
200162
Circlip
2
7
200176
Pneumatic cylinder
1
8
200164
Oilite Bearing
2
9
200182
Lifter Washer
1
10
200267
Lifter rod clevis
1
11
200268
Lifter cylinder bracket
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
,7(0 12
'5$:,1* 12
4 $
0)*
$339 '
&+. '
'5$:1
$48,/$
1$0(
'$7(
$3+
),1,6+
6,*1$785(
81/(66 27+(5:,6( 63(&,),(' ',0(16,216 $5( ,1 0,//,0(7(56 685)$&( ),1,6+ 72/(5$1&(6 /,1($5 $1*8/$5
'(6&5,37,21 31(80$7,& &</,1'(5 $&78$7,1* $50 75,**(5 &</,1'(5 %5$&.(7 5(7851 6723 %5$&.(7 )25:$5' 6723 %5$&.(7 &</,1'(5 52' &/(9,6 +(;$*21 6(7 6&5(: /2&.187 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 62&.(7 +($' &$3 6&5(: 1</2& 187
:(,*+7
0$7(5,$/
'(%85 $1' %5($. 6+$53 ('*(6
6(( ,7(0 /,67
47<
5(9,6,21
6&$/(
':* 12
6+((7 2)
31(80$7,& 75,**(5 $66(0%/< $
7,7/(
'2 127 6&$/( '5$:,1*
Assembly Number
900779
Assembly Name
Pneumatic Trigger Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
200177
Pneumatic cylinder
1
2
900784
Actuating arm
1
3
900783
Trigger cylinder bracket
1
4
900782
Return stop bracket
1
5
900781
Forward stop bracket
1
6
900780 Rev1
Cylinder rod clevis
1
7
200163
Heaxagon Set Screw
2
8
200178
Lock nut
2
9
200120
Socket head cap screw
6
10
200156
Socket head cap screw
1
11
200206
Socket head cap screw
1
12
200207
Nyloc nut
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
11
8
9
7
6
12
10
5
1
2
3
4
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12
PART NUMBER 900657 900658 200101 200102 900803 200103 200104 200105 200106 200107 900769 200108
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
DATE 12/03/13
APH
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
WEIGHT:
MATERIAL:
DESCRIPTION LIFTER PLATE SHAFT LIFTER PLATE SOCKET HEAD COUNTERSUNK SCREW DOWEL PIN LIFTER PLATE SHAFT BUSH SPRING HOLDER SPRING WASHER PRESSURE ADJUSTING NUT LIFTER SPRING PRESSURE STUD LIFTER SHAFT PRESSURE CAP
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
QTY. 1 1 1 1 1 1 1 1 1 1 1 1
REVISION
PRELIMINARY
SCALE:1:2
SHEET 1 OF 1
CAN LIFTER PLATE ASSEMBLY A2 900802 DWG NO.
TITLE:
DO NOT SCALE DRAWING
Assembly Number
900802
Assembly Name
Can Lifter Plate Assembly
Item Number Part Number
1
900657
2
0005
3
Part Name
Quantity per Assembly
Lifter plate shaft
1
Lifter plate
1
200101
Socket head countersunk screw
1
4
200102
Dowel pin
1
5
900803
Lifter plate shaft bush
1
6
200103
Spring holder
1
7
200104
Spring washer
1
8
200105
Pressure adjusting nut
1
9
200106
Lifter spring
1
10
200107
Pressure stud
1
11
900769
Lifter shaft
1
12
200108
Pressure cap
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Assembly Number
900805
Assembly Name
Seaming Head Drive Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
200200
Drive Motor
1
2
200201
Motor Slide Base
1
3
900731
Motor Mounting Bracket
1
4
200166
V Pulley
1
5
200168
Taperlock Bush
1
6
200167
V Pulley
1
7
200169
Taperlock Bush
1
8
200199
Revolving Handle
1
9
200165
V Belt
2
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
A
A
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
DATE 03/05/13
AQUILA
FINISH:
WEIGHT:
MATERIAL:
SCALE:1:1
DWG NO.
TITLE:
REVISION
SHEET 1 OF 1
1
QTY 1 1 1 1 1 1 1
5
KNOCK-OUT ASSEMBLY 900808
DO NOT SCALE DRAWING
SECTION A-A
6
4
1
DESCRIPTION KNOCK-OUT BUSH KNOCK-OUT PAD KNOCK-OUT SHAFT CIRCLIP SPRINGMASTERS C6609390 ROLLER BEARING SOCKET HEAD CSK SCREW
DEBUR AND BREAK SHARP EDGES
2
7
3
SEE ITEM LIST
200204 200205
PART NUMBER 900809 900810 900811 200202
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
ITEM NO. 1 2 3 4 5 6 7
A3
Assembly Number
900808
Assembly Name
Knockout Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900809
Knockout bush
1
2
0004
Knockout pad
1
3
900811
Knockout shaft Rev 2
1
4
200202
Circlip
1
5
200262
Knock-out Spring
1
6
200204
Roller bearing
1
7
200205
Socket head countersunk screw
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
4 $
0)*
$339 '
&+. '
'5$:1
1$0( $48,/$
6,*1$785(
),1,6+
7 % $
81/(66 27+(5:,6( 63(&,),(' ',0(16,216 $5( ,1 0,//,0(7(56 685)$&( ),1,6+ 72/(5$1&(6 /,1($5 $1*8/$5
3$57 180%(5
,7(0 12
'$7(
0$7(5,$/
:(,*+7
6(( ,7(0 /,67
'(%85 $1' %5($. 6+$53 ('*(6
5(9,6,21
35(/,0,1$5<
6&$/(
6+((7 2)
6($0,1* +($' *8$5' $66(0%/< $ ':* 12
7,7/(
47<
'2 127 6&$/( '5$:,1*
'(6&5,37,21 0$,1 *8$5' (1&/2685( $66(0%/< %27720 *8$5' 3/$7( $66(0%/< ',$ 723 *8$5' 3/$7( )5217 *8$5' 3/$7( 62&.(7 %87721 +($' &$3 6&5(: 0 ;
Assembly Number
900812
Assembly Name
Seaming Head Guard Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900813
Main guard enclosure assembly
1
2
900815
Bottom guard plate assembly 153 mm dia
1
3
900817
Top guard plate
1
4
900818
Front guard plate
1
5
200242
Socket Button Head Screw
24
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
4 $
0)*
$339 '
&+. '
'5$:1
$48,/$
1$0(
),1,6+
'$7(
:(,*+7
0$7(5,$/
3$57 180%(5
6,*1$785(
81/(66 27+(5:,6( 63(&,),(' ',0(16,216 $5( ,1 0,//,0(7(56 685)$&( ),1,6+ 72/(5$1&(6 /,1($5 $1*8/$5
,7(0 12
'(%85 $1' %5($. 6+$53 ('*(6
6(( ,7(0 /,67
'2 127 6&$/( '5$:,1*
5(9,6,21
47<
35(/,0,1$5<
6&$/(
6+((7 2)
$
0$,1 *8$5' (1&/2685( $66(0%/< ':* 12
7,7/(
'(6&5,37,21 0$,1 *8$5' (1&/2685( 3(0 63
Assembly Number
900813
Assembly Name
Main Guard Enclosure Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900814
Main Guard Enclosure
1
2
200224
Self clinching nut
21
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
16
17
21
22
23
17
DETAIL B SCALE 1 : 2
24
23
24
20
851
A
1
18
19
963.80
850
1990
6
4
26
2
7
14
3
5
1
DETAIL A SCALE 2 : 5
9
8
27
25
B
10
13
12
11
10
PART NUMBER 900842 900840 900841 900844 900845 900846 900847 200236 200252 200124 200156 200194 200142 200205 901035 901036 901037 900944 900945 901076 T.B.A. 200210 200217 200248 200325 SEE CHANGE PARTS 200154
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
17
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
20/06/13
DATE
WEIGHT:
MATERIAL:
PART DESCRIPTION MODEL 200 TABLE FRAME INFEED BOTTOM PLATE DISCHARGE BOTTOM PLATE INFEED TOP PLATE DISCHARGE TOP PLATE TABLE SPACER LIFTER RING ASSEMBLY LEVELLING FOOT NUT SOCKET HEAD CSK SCREW SOCKET HEAD CAP SCREW WASHER NUT SOCKET HEAD CSK SCREW TABLE SPACER CABINET MOUNTING BRACKET LOWER CABINET MOUNTING BRACKET UPPER GEARBOX MOUNTING PLATE PNEUMATICS MOUNTING PLATE SPACER SOCKET HD CAP SCR M10 X 80 SOCKET HEAD CAP SCREW WASHER NUT SOCKET HEAD CAP SCREW INFEED CAN TRANSFER PLATE WASHER
16
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
1 1 4 4 4 8 8 4 1 4
2
1
QTY 1 1 1 1 1 12 2 6 6 26 12 12 12 4 1
15
SCALE:1:5
DWG NO.
TITLE:
REVISION
1
SHEET 1 OF 1
MODEL 200 TABLE ASSEMBLY A1 900839
DO NOT SCALE DRAWING
Assembly Number
900839
Assembly Name
Model 200 Table Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900842
Model 200 Table Frame
1
2
900840
Infeed Bottom Plate
1
3
900841
Discharge Bottom Plate
1
4
900844
Infeed Top Plate
1
5
900845
Discharge Top Plate
1
6
900846
Table Spacer
12
8
200236
Levelling Foot
6
9
200252
Nut
6
10
200124
Socket head countersunk screw
26
11
200156
Socket head cap screw
12
12
200194
Washer
12
13
200142
Nut
12
14
200205
Socket head countersunk screw
4
15
901035
Table spacer
1
16
901036
Cabinet mounting bracket lower
1
17
901037
Cabinet mounting bracket upper
2
18
900944
Gearbox mounitng plate
1
19
900945
Pneumatics mounting plate
1
20
901076
Spacer
4
21
200285
Socket head cap screw
4
22
200210
Socket Head Cap Screw
4
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Assembly Number
900839
Assembly Name
Model 200 Table Assembly
Item Number Part Number
Part Name
Quantity per Assembly
23
200217
Washer
8
24
200248
Nut
8
25
200325
Socket head cap screw
4
26
0015
Infeed can transfer plate
1
27
200154
Washer
4
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
,7(0
3$57 180%(5 7 % $
47<
4 $
0)*
$339 '
&+. '
'5$:1
$48,/$
1$0(
),1,6+
6,*1$785(
81/(66 27+(5:,6( 63(&,),(' ',0(16,216 $5( ,1 0,//,0(7(56 685)$&( ),1,6+ 72/(5$1&(6 /,1($5 $1*8/$5
3$57 '(6&5,37,21 /,)7(5 3/$7( 5,1* 00 ',$ /,)7(5 3/$7( 5,1* 02817 0 ; 62&.(7 +($' &2817(5681. 6&5(:
'$7(
:(,*+7
0$7(5,$/
6(( ,7(0 /,67
'(%85 $1' %5($. 6+$53 ('*(6
6&$/(
':* 12
7,7/(
5(9,6,21
6+((7 2)
/,)7(5 5,1* $66(0%/<
'2 127 6&$/( '5$:,1*
$
Assembly Number
900847
Assembly Name
Lifter Ring Assembly
Item Number Part Number
1
0006
2
Part Name
Quantity per Assembly
Lifter plate ring
1
900859
Lifter Plate Ring Mount
1
3
200205
Socket head countersunk screw
4
4
200352
Socket head countersunk screw
4
5
200157
Washer
4
6
200158
Nut
4
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
4
2
1
3
6
10
7
8
9
5
11
PART NUMBER 900855 900850 900857 900849 T.B.A. 200156 T.B.A. T.B.A. T.B.A. 200300 200302
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
21/06/13
DATE
WEIGHT:
MATERIAL:
PART DESCRIPTION DRIVEN SPROCKET DRIVEN SPROCKET MOUNTING SHAFT DRIVEN SPROCKET MOUNTING SHAFT CAP DRIVEN SPROCKET BEARING HUB 10 X 8 X 35 KEY SOCKET HEAD CAP SCREW INTERNAL SNAP RING SPRINGMASTERS SBM0420 SKF AXK 2035 SKF NNF-5004-AD8-2LSV SPROCKET TAPERLOCK BUSH
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
1 1 1 1 1
1 1 1
1
QTY 1 1
REVISION
1
SCALE:1:2
SHEET 1 OF 1
DRIVEN SPROCKET ASSEMBLY A2 900848 DWG NO.
TITLE:
DO NOT SCALE DRAWING
Assembly Number
900848
Assembly Name
Driven Sprocket Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900855
Driven Sprocket
1
2
900850
Driven sprocket mounting shaft
1
3
900857
Sprocket mounting shaft cap
1
4
900849
Sprocket bearing hub
1
5
200232
Key
1
6
200156
Socket head cap screw
1
7
200233
Snap Ring
1
9
200234
Needle Roller Cage
1
10
200300
Sprocket
1
11
200302
Taperlock bush
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
2
4
3
1
Q.A
MFG
APPV'D
CHK'D
DRAWN
NAME AQUILA
SIGNATURE
FINISH:
T.B.A.
4
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
PART NUMBER 900856 900852 T.B.A.
ITEM NO. 1 2 3
DATE 25/06/13
WEIGHT:
MATERIAL:
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
DO NOT SCALE DRAWING
1
QTY 1 1 1
REVISION
PRELIMINARY
SCALE:1:1
SHEET 1 OF 1
IDLING SPROCKET ASSEMBLY A2 900851 DWG NO.
TITLE:
PART DESCRIPTION IDLER SPROCKET IDLING SPROCKET MOUNTING SHAFT SKF 6208-2RS1 SPRINGMASTERS INTERNAL CIRCLIP INT 0800
Assembly Number
900851
Assembly Name
Idling Sprocket Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900856
Idling sprocket
1
2
900852
Idling Sprocket Mounting Shaft
1
3
200190
Ball Bearing
1
4
200225
Internal Circlip
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
2
4
3
1
T.B.A.
4
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
DATE 24/06/13
APH
FINISH:
WEIGHT:
MATERIAL:
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
PART DESCRIPTION DISCHARGE SPROCKET IDLING SPROCKET MOUNTING SHAFT SKF 6208-2RS1 SPRINGMASTERS INTERNAL CIRCLIP INT 0800
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
PART NUMBER 900853 900852 T.B.A.
ITEM NO. 1 2 3
REVISION
SCALE:1:1
DWG NO.
SHEET 1 OF 1
900854
DO NOT SCALE DRAWING
RELEASED
A2
DISCHARGE SPROCKET ASSEMBLY
TITLE:
1
QTY 1 1 1
Assembly Number
900854
Assembly Name
Discharge Sprocket Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900853
Discharge sprocket
1
2
900852
Idling Sprocket Mounting Shaft
1
3
200190
Ball Bearing
1
4
200225
Internal Circlip
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
21
16
8
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
PART NUMBER 900909 900910 SEE CHANGE PART LIST 900897 901066 900899 900898 200239 200240 200156 200241 200242 200217 200237 200243 200250 200249 200248 SEE CHANGE PART LIST 900941 900940 200119 901064 200274 900969 200120 901063 901065 901051 200275
20
PART DESCRIPTION SPIRAL MOUNTING PLATE SPIRAL SUPPORT BRACKET SPIRAL SPIRAL SUPPORT BLOCK HORIZONTAL BEVEL GEAR BEVEL GEAR GUARD BEARING HOUSING BALL BEARING BALL BEARING SOCKET HEAD CAP SCREW SOCKET HEAD CAP SCREW SOCKET BUTTON HEAD SCREW WASHER HEX HEAD SCREW HEX HEAD SCREW CIRCLIP CIRCLIP NUT SPIRAL SUPPORT BLOCK SPACER VERTICAL SPIRAL MOUNTING PLATE HORIZONTAL SPIRAL SUPPORT BLOCK SOCKET HEAD CAP SCREW VERTICAL BEVEL GEAR SPACER SPROCKET CLAMPING RING SOCKET HEAD CAP SCREW VERTICAL SPIRAL DRIVE SHAFT VERTICAL BEVEL GEAR SPIRAL SHAFT TAPERLOCK BUSH
22
QTY 1 1 1 2 1 1 1 3 2 4 4 4 8 2 3 3 2 3 2 1 1 4 1 1 1 1 1 1 1 1
NOT REQUIRED
16
13
8
13
15
14
8
10
18
12
23
17
11
9
9
17
27
24 30
25
26
29
7
2
1
3
4
4
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
DATE 27/08/13
APH
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
6
WEIGHT:
MATERIAL:
DEBUR AND BREAK SHARP EDGES
SEE ITEM LIST
5
DO NOT SCALE DRAWING
REVISION
2
SCALE:1:2
SHEET 1 OF 1
CAN INFEED SPIRAL ASSEMBLY A1 900911 DWG NO.
TITLE:
28
Assembly Number
900911
Assembly Name
Can Infeed Spiral Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900909 REV3
Spiral Mounting Plate
1
2
900910
Spiral support bracket
1
3
0013
Can infeed spiral
1
4
900897
Spiral support block
2
5
901066
Horizontal bevel gear
1
6
900899
Spiral Drive Cover
1
7
900898
Bearing housing
1
8
200239
Ball Bearing
3
9
200240
Ball Bearing
2
10
200156
Socket head cap screw
4
11
200241
Socket Head Cap Screw
4
12
200242
Socket Button Head Screw
4
13
200217
Washer
8
14
200237
Hexagon Setscrew
2
15
200243
Hexagon Setscrew
3
16
200250
Circlip
3
17
200249
Circlip
2
18
200248
Nut
3
19
0014
Spiral support block spacer
2
20
900941
Vertical spiral mounting plate
1
21
900940
Horizontal spiral support block
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Assembly Number
900911
Assembly Name
Can Infeed Spiral Assembly
Item Number Part Number
Part Name
Quantity per Assembly
22
200119
Socket head cap screw
4
23
901064
Vertical bevel gear spacer
1
24
200274
Sprocket
1
25
900969
Clamping ring
1
26
200120
Socket head cap screw
1
27
901063
Vertical spiral drive shaft
1
28
901065
Vertical bevel gear
1
29
901051
Spiral shaft
1
30
200275
Taperlock bush
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
PART NUMBER 900900 900901 900902 900903 900904 900905 900906
900907 900908
ITEM NO. 1 2 3 4 5 6 7
8 9 10 11 12
12
10
11
PART DESCRIPTION INFEED CAN GUIDE RAIL LH DISCHARGE CAN GUIDE RAIL LH INFEED CAN GUIDE RAIL RH DISHARGE CAN GUIDE RAIL RH INFEED CAN GUIDE RAIL SUPPORT RH INFEED CAN GUIDE RAIL SUPPORT LH INTERMEDIATE CAN GUIDE RAIL SUPPORT RH INTERMEDIATE CAN GUIDE RAIL SUPPORT LH DISCHARGE CAN GUIDE RAIL SUPPORT HEX HEAD SCREW M10 X 20 M10 WASHER SOCKET HEAD CAP SCREW M8 X 16
1 2 8 8 12
QTY 1 1 1 1 1 1 1
5
6
7
1
3
8
9
4
2
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
9
27/08/13
DATE
WEIGHT:
MATERIAL:
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
DO NOT SCALE DRAWING
REVISION
PRELIMINARY
SCALE:1:3
SHEET 1 OF 1
900912
A1
MODEL 200 CAN GUIDE RAIL ASSEMBLY DWG NO.
TITLE:
Assembly Number
900912
Assembly Name
Model 200 Can Guide Rail Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900900
Infeed can guide rail LH
1
2
900901
Discharge can guide rail LH
1
3
900902
Infeed can guide rail RH
1
4
900903
Discharge can guide rail RH
1
5
900904
Infeed Can Guide Rail Support RH
1
6
900905
Infeed Can Guide Rail Support LH
1
7
900906
Intermediate Can Guide Rail Support RH
1
8
900907
Intermediate Can Guide Rail Support LH
1
9
900908
Discharge Can Guide Rail Support
2
10
200237
Hexagon Setscrew
8
11
200217
Washer
8
12
200244
Socket Head Cap Screw
12
13
901084
Can present sensor bracket
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Washer M6 Socket Head Cap Screw_AM
5
6
4
PART NUMBER 900938 900939 Socket Head CSK Screw M6 x 12 Dowel Pin 6 x 25
ITEM NO. 1 2 3
M6 X 15
1/4 HS FLAT WASHER
DESCRIPTION TIMING DISC TIMING DISC BOSS M5 X 15
2
2
3
QTY. 1 1 1
5
6
3
1
4
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
2
DATE 18/12/13
WEIGHT:
MATERIAL:
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
REVISION
1
SCALE:1:1
SHEET 1 OF 1
900937
A2
TIMING DISC ASSEMBLY DWG NO.
TITLE:
DO NOT SCALE DRAWING
Assembly Number
900937
Assembly Name
Timing Disc Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900938
Timing disc
1
2
900939
Timing disc boss
1
3
200124
Socket head countersunk screw
1
4
200186
Dowel Pin
3
5
200246
Washer
2
6
200152
Socket head cap screw
2
7
901083
Timing disc sensor bracket
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
875-M16-316
3
3
2
1
PART NUMBER 900723 873-416100D
ITEM NO. 1 2
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
DATE 03/01/14
DESCRIPTION SEAMER SUPPORT STAND Levelling Foot-316St.Steel + Plastic Pad Nut-M16x2-316 (A4)
WEIGHT:
MATERIAL:
4
DEBUR AND BREAK SHARP EDGES
SEE ITEM LIST
QTY. 1 4
REVISION
PRELIMINARY
SCALE:1:5
SHEET 1 OF 1
SEAMER SUPPORT STAND ASSEMBLY A1 900946 DWG NO.
TITLE:
DO NOT SCALE DRAWING
Assembly Number
900946
Assembly Name
Seamer Support Stand Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900723
Seamer Support Stand
1
2
200236
Levelling Foot
4
3
200252
Nut
4
5
200152
Socket head cap screw
4
6
200246
Washer
4
7
200247
Nut
4
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
6
8
5
1
2
9
900800 REV 1 Deublin 250-094-284 900948 REV 1 900950 REV 2 SMC KQG2L08-01S 200111 T.B.A. 200110 200109 901087
5 6 7 8 9 10 11 12 13 14
SECTION A-A
900949 REV 1
4
4
901047
3
14
901046
2
ITEM NO. PART NUMBER 1 901045
9
7
TURRET CLAMP GAS FLUSH
SOCKET HEAD CAP SCREW
SOCKET HEAD CAP SCREW
SOCKET HEAD COUNTERSINK SCREW M4 X 8 SHCS
TURRET SUPPORT SHAFT MANIFOLD TURRET SUPPORT SHAFT ADAPTOR
TURRET PLATE BOSS
DESCRIPTION UPPER CENTERING RING 89MM DIA NEO GAS FLUSH LOWER CENTERING RING 89MM DIA NEO GAS FLUSH TURRET PLATE 89MM DIA NEO GAS FLUSH TURRET SUPPORT SHAFT
1
3
4
28
16
16
1
1
1
1
1
1
4
QTY. 4
11
13
12
3
10
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
08/01/14
DATE
A
A
WEIGHT:
MATERIAL:
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
REVISION
3
SCALE:1:2
DWG NO.
SHEET 1 OF 1
END FEED TURRET GAS FLUSH ASSEMBLY A2 900947 TITLE:
DO NOT SCALE DRAWING
Assembly Number
900947
Assembly Name
End Feed Turret Gas Flush Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
0010
Upper centering ring
4
2
0011
Lower centering ring
4
3
0012
Turret plate
1
4
900949
Turret Support Shaft
1
5
900800
Turret plate boss
1
6
900801
Turret clamp
1
6
200255
Rotary Union
1
8
900950
Turret support shaft adaptor Rev 1
1
9
200332
Banjo Elbow
16
9
200113
Swivel elbow adaptor for pneumatic cylind
16
10
200111
Socket head countersunk screw
16
11
200324
Socket Head Cap Screw
28
12
200110
Socket head cap screw
4
13
200109
Socket head cap screw
3
14
901087
Turret Clamp Gas flush
1
15
900948
Turret support shaft manifold
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
13
12
8
18
19
14
6
15
3
16
5
9
2
1
4
7
10
11 17
900849 900857
3 4
200217 200248 200298 200303 200302
15 16 17 18 19
Q.A
MFG
APPV'D
CHK'D
DRAWN
NAME AQUILA
SIGNATURE
WEIGHT:
MATERIAL:
900961
14
DATE
901086
13
22/01/14
200299
12
FINISH:
200297
11
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
SUPPORT PLATE
900960
10
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
SCALE:1:2
DWG NO.
TITLE:
REVISION
1
1
1
1
1
1
SHEET 1 OF 1
900958
TAKE-OFF SPROCKET ASSEMBLY
DO NOT SCALE DRAWING
TAPERLOCK BUSH
SPROCKET
CONNECTING LINK
NUT
WASHER
1
1 SUPPORT PLATE SPACER
1 TENSIONER SPROCKET SHAFT
1
1
1
1
1
1
1
1
1
1
QTY 1
TENSIONER SPROCKET
ROLLER CHAIN
SPRINGMASTERS INT 0470
SPRINGMASTERS INT 0370
M8 X 20
SKF 61904-2RS1
PART DESCRIPTION TAKE-OFF SPROCKET TAKE-OFF SPROCKET MOUNTING SHAFT SPROCKET BEARING HUB SPROCKET MOUNTING SHAFT CAP SKF 3204 A-2RS1
9
8
7
6
SOCKET HEAD CAP SCREW
901072
2
5
PART NUMBER 901071
ITEM NO. 1
A2
Assembly Number
900958
Assembly Name
Take Off Drive Sprocket Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
901071
Take off sprocket
1
2
901072
Take off sprocket mounting shaft to drive s
1
3
900849
Sprocket bearing hub
1
4
900857
Sprocket mounting shaft cap
1
5
200277
Ball bearing
1
6
200276
Ball bearing
1
7
200156
Socket head cap screw
1
8
200259
Circlip
1
9
200260
Internal circlip
1
10
900960
Support plate
1
11
200297
Roller chain
1
12
200299
Tensioner sprocket
1
13
901086
Tensioner sprocket shaft
1
14
900961
Support plate spacer
1
15
200217
Washer
1
16
200248
Nut
1
17
200298
Connecting link
1
18
200303
Sprocket
1
19
200302
Taperlock bush
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
ITEM NO. 1 2 3 4 5 6 7
PART NUMBER 200270 200271 901050 200272 200152 200246 200217
DESCRIPTION PNEUMATIC CYLINDER DOUBLE KNUCKLE JOINT DAMPENING CYLINDER BRACKET BALL BEARING SOCKET HEAD CAP SCREW WASHER WASHER
QTY. 1 1 1 1 2 2 2
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
3
1
4
7
2
DATE 18/07/14
6
WEIGHT:
MATERIAL:
DEBUR AND BREAK SHARP EDGES
SEE ITEM LIST
5
REVISION
RELEASED
SCALE:1:1
SHEET 1 OF 1
901002
A2
INDEXING HEAD DAMPENING ASSEMBLY DWG NO.
TITLE:
DO NOT SCALE DRAWING
Assembly Number
901002
Assembly Name
Indexing Head Dampening Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
200270
Pneumatic cylinder
1
2
200271
Double knuckle joint
1
3
901050
Dampening cylinder bracket
1
4
200272
Ball bearing
1
5
200152
Socket head cap screw
2
6
200246
Washer
2
7
200217
Washer
2
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
6
ITEM NO. 1 2 3 4 5
PART NUMBER DESCRIPTION TRANSFER CHAIN - FENNER 12B-2 200282 STAINLESS STEEL DUPLEX CHAIN 900895 REV 1 CHAIN FLIGHT 900896 CHAIN SLIPPER 901074 ADJUSTABLE BLADE Socket Button Head Cap Screw M4 x 8 Washer M4 WASHER
6.750 171.45
46
QTY. 1 23 23 23 46
0.750 19.05
5
6
2
4
CHAIN LENGTH 155.25 INCHES 23 PITCHES OF 6.75 INCHES
DETAIL A SCALE 2 : 1
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
14/08/14
DATE
SCALE 1 : 2
A
WEIGHT:
MATERIAL:
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
1
3
REVISION
RELEASED
SCALE:1:4
DWG NO.
SHEET 1 OF 1
MODEL 200 TRANSFER CHAIN ASSEMBLY A1 901073 TITLE:
DO NOT SCALE DRAWING
Assembly Number
901073
Assembly Name
Model 200 Transfer Chain Assembly
Item Number Part Number
1
200282
2
900895 Rev 1
3
Part Name
Quantity per Assembly
Transfer chain
1
Chain flight
23
900896
Chain slipper
23
4
901074
Adjustable blade
23
5
200284
Socket button head cap screw
46
6
200283
Washer
46
7
200356
Chain Tensioner
1
8
901XXX
Mounting plate
1
9
200355
Hexagon Setscrew
1
10
200222
Nut
1
11
200154
Washer
2
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
2
1
PART NUMBER 900860 T.B.A.
ITEM NO. 1 2
DESCRIPTION MODEL 200 CHAIN SUPPORT TRACK SOCKET HEAD CAP SCREW M6 X 12
26
QTY. 1
Q.A
MFG
APPV'D
CHK'D
DRAWN
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
DATE
MATERIAL:
WEIGHT:
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
REVISION
RELEASED
SCALE:1:2
DWG NO.
SHEET 1 OF 1
901075
A1
MODEL 200 CHAIN SUPPORT TRACK ASSEMBLY
TITLE:
DO NOT SCALE DRAWING
Assembly Number
901075
Assembly Name
Model 200 Chain Support Track Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900860
Model 200 chain support track
1
2
200227
Socket head cap screw
26
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
3
4
2
5
Q.A
MFG
APPV'D
CHK'D
DRAWN
NAME AQUILA
SIGNATURE
FINISH:
16/09/14
DATE
PART NUMBER 901078 200300 200151 200144 200301
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
ITEM NO. 1 2 3 4 5
1
WEIGHT:
MATERIAL:
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
REVISION
RELEASED
SCALE:1:2
DWG NO.
SHEET 1 OF 1
SERVO MOTOR DRIVE ASSEMBLY A2 901079
TITLE:
QTY. 1 1 1 1 1
DO NOT SCALE DRAWING
DESCRIPTION SERVO MOTOR GEARBOX SPROCKET ROLLER CHAIN CONNECTING LINK TAPERLOCK BUSH
Assembly Number
901079
Assembly Name
Servo Motor Drive Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
901078
Gearbox
1
2
200144
Connecting link
1
3
200151
Roller chain
1
4
200301
Taperlock bush
1
5
200300
Sprocket
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Assembly Number
901085
Assembly Name
100 Series Electrical Control System Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
200308
Can present sensor
1
2
200305
End low level sensor
1
3
200309
End present sensor clamp
2
4
200307
End present sensor
2
5
200306
Timing disc sensor
1
6
200322
HMI
1
7
200323
HMI cable
1
8
200315
Servo amplifier
1
9
200319
Power connector
1
10
200320
Cable
1
11
200321
Cable
1
12
200304
Servo motor
1
13
200329
Emergency Stop Station
4
14
200330
Safety Switch
4
15
200331
Miscellaneous Materials
1
16
200349
Control panel
1
17
200316
Controller
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
3
2
4
7
1
5 6 7
ITEM NO. 1 2 3 4
4
5
6
Q.A
MFG
APPV'D
CHK'D
DRAWN
NAME AQUILA
SIGNATURE
FINISH:
24/09/14
DATE
WEIGHT:
MATERIAL:
6 6 4
SCALE:1:5
DWG NO.
TITLE:
QTY. 1 1 1 10
DEBUR AND BREAK SHARP EDGES
SEE ITEM LIST
WASHER NUT GUARD MOUNTING STUD
DESCRIPTION GUARD FRONT PANEL UPPER GUARD FRONT PANEL CENTRE GUARD FRONT PANEL LOWER
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
PART NUMBER 901091 901092 901093 Socket Button Head Cap Screw M8 x 16 200194 200142 900951
REVISION
SHEET 1 OF 1
A1
RELEASED
FRONT GUARD ASSEMBLY 901090
DO NOT SCALE DRAWING
Assembly Number
901090
Assembly Name
Front Guard Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
901091
Guard front panel upper
1
2
901092
Guard front panel centre
1
3
901093
Guard front panel lower
1
4
200279
Security screw
10
5
200194
Washer
6
6
200142
Nut
6
7
900951
Guard Mounting Stud
4
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
1
3
2
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
25/09/14
DATE
WEIGHT:
MATERIAL:
ITEM NO. PART NUMBER DESCRIPTION 1 901095 GUARD SIDE PANEL RH Socket Button Head 2 Cap Screw M8 x 16 3 901088 GUARD MOUNTING STUD, LONG
DEBUR AND BREAK SHARP EDGES
SEE ITEM LIST
4
QTY. 1 4
REVISION
PRELIMINARY
SCALE:1:5
SHEET 1 OF 1
T.B.A.
A1
GUARD SIDE PANEL RH ASSEMBLY DWG NO.
TITLE:
DO NOT SCALE DRAWING
Assembly Number
901094
Assembly Name
Guard Side Panel RH Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
901095
Guard side panel RH
1
2
200279
Security screw
4
3
901088
Guard mounting stud, long
4
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
1
3
2
3
901088
ITEM NO. PART NUMBER 1 901097 Socket Button Head 2 Cap Screw M8 x 16
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
GUARD MOUNTING STUD, LONG
DESCRIPTION GUARD SIDE PANEL LH
25/09/14
DATE
4
QTY. 1 4
WEIGHT:
MATERIAL:
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
REVISION
PRELIMINARY
SCALE:1:5
SHEET 1 OF 1
901096
A1
GUARD SIDE PANEL LH ASSEMBLY DWG NO.
TITLE:
DO NOT SCALE DRAWING
Assembly Number
901096
Assembly Name
Guard Side Panel LH Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
901097
Guard Side Panel LH
1
2
200279
Security screw
4
3
901088
Guard mounting stud, long
4
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
B
DETAIL B SCALE 1 : 2
C
3
10 11 12
DETAIL C SCALE 1 : 1
D
D
A
A
15
14
SECTION D-D SCALE 1 : 2
SECTION A-A SCALE 1 : 2
9
10
13
1
2 3
4
5
901100
6
9
Q.A
MFG
APPV'D
CHK'D
DRAWN
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
15
14
7
Nylon Washer M4 Socket Head Cap Screw_AM
12
DATE
WEIGHT:
MATERIAL:
SEE ITEM LIST SCALE:1:5
DWG NO.
TITLE:
REVISION
RELEASED
8
4
4
64
32
40
2
2
2
32
8 2 4
4
QTY. 1
SHEET 1 OF 1
FOLDING DOORS ASSEMBLY A1 901098
DO NOT SCALE DRAWING
M4 X 16
NYLOC SELF LOCKING NUT, ST STL A2 ISO NYLON WASHER M4
ACTUATOR PLATE
Hinge-c/sink screw hole *** ITEM DESC *** SOCKET HEAD CAP SCREW
PANEL
DESCRIPTION GUARD REAR FOLDING DOORS
DEBUR AND BREAK SHARP EDGES
WDS-5724-90-02-002 Socket Button Head Cap Screw M4 x 20
M4 NYLOC
11 13
Socket Button Head Cap Screw M4 x 16
10
8
8
8655-202 8500-204 Socket Head Cap Screw M5 x 35 Socket Head CSK Screw M5 x 15 Rockwell Ferrogard GD2 Actuator Rockwell Ferrogard GD2 Switch
3 4 5 7
901099
2
ITEM NO. PART NUMBER 1 900954 REV 3
Assembly Number
901098
Assembly Name
Folding Doors Assembly
Item Number Part Number
1
900954 Rev3
2
Part Name
Quantity per Assembly
Guard rear folding doors
1
901099
Panel
4
3
200265
Surface mount hinge
8
4
200334
Bow handle
2
5
200335
Socket head cap screw
4
6
200336
Socket head countersunk screw
32
7
14.1
See assembly 901085 item 14
2
8
14.2
See assembly 901085 item 14
2
9
901100
Actuator plate
2
10
200337
Socket head button screw
40
11
200207
Nyloc nut
32
12
200338
Nylon washer
64
13
200339
Socket head cap screw
4
14
200348
Door Catch
4
15
200351
Socket Button Head Screw
8
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
B
2
12
11
10
DETAIL B SCALE 1 : 2
2
4
3
9
8
DETAIL A SCALE 1 : 2
901112 Socket Button Head Cap Screw M4 x 6 Rockwell Ferrogard GD2^901101 WDS-5724-90-02-002 Socket Button Head Cap Screw M4 x 20
10 11 12 13 14
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
*** ITEM DESC ***
MOUNTING PLATE
Hinge-c/sink screw hole
PANEL
PANEL
3RD ANGLE PROJECTION
Socket Head CSK Screw M5 x 30
4
Socket Head CSK Screw M5 x 15 9
8500-204
2
8655-202
8
16
1
901104
15
4
901103 7
DATE 07/10/14
2
1
2
8
2
1
1
1 6
PANEL
901102
5
FINISH:
44
NYLON WASHER M4 NYLOC SELF LOCKING NUT, ST STL A2 ISO M4 NYLOC
22
QTY. 1 26
WEIGHT:
MATERIAL:
16 15
DESCRIPTION GUARD UPPER RH
4
ITEM NO. PART NUMBER 1 900952 REV 3 Socket Button Head 2 Cap Screw M4 x 16 3 Nylon Washer M4
6
5
1
ATTACH POLYCARBONATE PANELS TO 15 X 3 PLATES USING M4 SECURITY SOCKET BUTTON HEAD SCREWS, M4 NYLOC NUTS AND NYLON WASHERS 22 PLACES
A
DEBUR AND BREAK SHARP EDGES
SEE ITEM LIST
14
13
7
SCALE:1:5
DWG NO.
TITLE:
REVISION
SHEET 1 OF 1
A1
PRELIMINARY
GUARD UPPER R.H. ASSEMBLY 901101
DO NOT SCALE DRAWING
Assembly Number
901101
Assembly Name
Guard Upper RH Assembly
Item Number Part Number
1
900952 Rev3
2
Part Name
Quantity per Assembly
Guard upper RH
1
200337
Socket head button screw
26
3
200338
Nylon washer
44
4
200207
Nyloc nut
22
5
901102
Panel
1
6
901103
Panel
1
7
901104
Panel
1
8
200265
Surface mount hinge
2
9
200336
Socket head countersunk screw
8
10
901112
Mounting plate
2
11
200126
Socket button head screw
4
12
14.1
See assembly 901085 item 14
1
13
200348
Door Catch
2
14
200351
Socket Button Head Screw
4
15
200334
Bow handle
1
16
200350
Socket head countersunk screw
2
17
200340
Tube insert
2
18
200341
Tube insert
2
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
DETAIL B SCALE 1 : 2
12
13
10
11
2
14
16
15
DETAIL A SCALE 1 : 2
901107 8655-202 Socket Head CSK Screw M5 x 15 901112 Socket Button Head Cap Screw M4 x 6
7 8
2 4
Socket Button Head Cap Screw M4 x 20 16
1
2
1
4
2
8
1 2
1
WDS-5724-90-02-002
*** ITEM DESC ***
MOUNTING PLATE
PANEL Hinge-c/sink screw hole
PANEL
44
NYLON WASHER M4 NYLOC SELF LOCKING NUT, ST STL A2 ISO PANEL
22 1
QTY. 1 26
DESCRIPTION GUARD UPPER LH
15
14
13
12
11
10
8500-204 Socket Head CSK Screw M5 x 30 Rockwell Ferroguard GD2^901105
901103
6
9
M4 NYLOC 901106
4 5
ITEM NO. PART NUMBER 1 900953 REV 3 Socket Button Head 2 Cap Screw M4 x 16 3 Nylon Washer M4
7
6
5
1
A
ATTACH POLYCARBONATE PANELS TO 15 X 3 PLATES USING M4 SECURITY SOCKET BUTTON HEAD SCREWS, M4 NYLOC NUTS AND NYLON WASHERS 22 PLACES
2
4
3
Q.A
MFG
APPV'D
CHK'D
DRAWN
AQUILA
NAME
FINISH:
SIGNATURE
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
DATE 07/10.14
WEIGHT:
MATERIAL:
SEE ITEM LIST
DEBUR AND BREAK SHARP EDGES
8
SCALE:1:5
DWG NO.
TITLE:
9
REVISION
SHEET 1 OF 1
A1
PRELIMINARY
GUARD UPPER L.H. ASSEMBLY 901105
DO NOT SCALE DRAWING
B
Assembly Number
901105
Assembly Name
Guard Upper LH Assembly
Item Number Part Number
1
900953 Rev3
2
Part Name
Quantity per Assembly
Guard upper LH
1
200337
Socket head button screw
26
3
200338
Nylon washer
44
4
200207
Nyloc nut
22
6
901103
Panel
1
7
901107
Panel
1
7
901104
Panel
1
8
200265
Surface mount hinge
2
9
200336
Socket head countersunk screw
8
10
901112
Mounting plate
2
11
200126
Socket button head screw
4
12
200334
Bow handle
1
13
200350
Socket head countersunk screw
2
14
14.2
See assembly 901085 item 14
1
15
200348
Door Catch
2
16
200351
Socket Button Head Screw
4
17
200340
Tube insert
2
18
200341
Tube insert
2
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
4
5
6
DETAIL A SCALE 1 : 2
Q.A
MFG
APPV'D
CHK'D
DRAWN
NAME AQUILA
SIGNATURE
DESCRIPTION GUARD INSIDE PANEL
3
1
DATE
WEIGHT:
MATERIAL:
SEE ITEM LIST SCALE:1:10
DWG NO.
3
REVISION
SHEET 1 OF 1
901108
A
1
PRELIMINARY
A2
GUARD INSIDE PANELS ASSEMBLY
TITLE:
DO NOT SCALE DRAWING
14
DEBUR AND BREAK SHARP EDGES
28
NYLON WASHER M4
14
2
1
QTY. 2
NYLOC SELF LOCKING NUT, ST STL A2 ISO
PANEL
GUARD INSIDE PANEL SUPPORT
08/10/14
6
FINISH:
M4 NYLOC
4
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
901110 Socket Button Head Cap Screw M4 x 16 Nylon Washer M4
3 5
901111
2
ITEM NO. PART NUMBER 1 901109
2
Assembly Number
901108
Assembly Name
Guard Inside Panels Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
901109
Guard inside panel
2
2
901111
Guard inside panel support
1
3
901110
Panel
2
4
200337
Socket head button screw
22
5
200338
Nylon washer
28
6
200207
Nyloc nut
14
7
200340
Tube insert
2
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Assembly Number
901113
Assembly Name
Model 100 Series Pneumatic Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
200342
Pneumatic control panel
1
2
200347
Reed switch
6
3
200343
Swivel elbow
2
4
200344
Swivel elbow
2
5
200345
Exhaust valve
2
6
200346
Nipple
2
7
200295
Polyurethane tube
5
8
200296
Polyurethane tube
5
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
Assembly Number
901118
Assembly Name
Lifter Blanking Plate Assembly
Item Number Part Number
Part Name
Quantity per Assembly
1
900913
Lifter blanking plate
1
2
900859
Lifter Plate Ring Mount
1
3
200205
Socket head countersunk screw
4
4
200352
Socket head countersunk screw
4
5
200157
Washer
4
6
200158
Nut
4
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
ITEM 0012
ITEM 0007
ITEM 0001
ITEM 0008
ITEM 0002
ITEM 0013
ITEM 0003
Q.A
MFG
APPV'D
CHK'D
DRAWN
NAME AQUILA
SIGNATURE
FINISH:
ITEM 0014
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
ITEM 0009
ITEM 0004
DATE 08/09/14
WEIGHT:
MATERIAL:
N/A
DEBUR AND BREAK SHARP EDGES
ITEM 0010
ITEM 0005
REVISION
N/A
SCALE:1:2
DWG NO.
SHEET 1 OF 1
A3
GAS CHANGE PARTS
TITLE:
DO NOT SCALE DRAWING
ITEM 0015
ITEM 0011
ITEM 0006
Assembly Number
8633
Assembly Name
Change Parts
Item Number Part Number
Part Name
Quantity per Assembly
1
901038
Seaming chuck 89 mm dia
1
2
900699 12000
1st operation seaming roll
1
3
900699 12001
2nd operation seaming roll
1
4
901039
Knockout pad 89 mm NEO
1
5
901040
Lifter plate 89 mm dia
1
6
901041
Lifter plate ring 89mm dia
1
7
901042
Top end feed plate
1
8
901043
End feed ring 89 mm dia
1
9
901044
End feed bottom plate 89 mm dia
1
10
901045
Upper centering ring 89 mm dia
4
11
901046
Lower centering ring 89 mm dia
4
12
901047
Turret plate 89mm dia
1
13
9012XX
Can infeed spiral 89mm dia
1
14
901048
Spiral support block spacer 89mm dia
2
15
901049
Infeed can transfer plate 89mm dia
1
Eurocan Sales & Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com
EUROCAN Sales & Service Ltd
Eurocan Sales and Service Ltd Tel: +44 (0)1903 810110 Email: sales@eurocanltd.com www.eurocanltd.com