Apc versawall

Page 1

AUSTRALIAN PAVING CENTRE

Versawall ™

www.australianpaving.com


The Versawall™ system is a unique interlocking retaining wall system which is perfect

AVAILABLE SIZES 250mm

for reclaiming sloping land and constructing garden beds and planter boxes. These blocks feature a patent pending design with self locating lugs which makes it quick and easy

60mm

to build garden walls. The Versawall™ system creates pure vertical retaining walls which 300mm

means less yard space is required and a modern look is achieved.

Universal Capping Unit 215mm

FEATURES INCLUDE 200mm s 6ERY QUICK AND EASY TO BUILD A WALL WITH THESE SELF INTERLOCKING BLOCKS s "UILD UP TO MM HIGH COURSES PLUS THE CAPPING UNIT 390mm Versawall™ CCorner Unit** unique self interlocking lugs

215mm

COLOUR OPTIONS

200mm

400mm Versawall™ Standard Unit Charcoal

Oatmeal

Sunstone

*Versawall® corner units are sold as pairs


TYPICAL CROSS SECTION OF VERSAWALL™ Versawall ™ cross section - Retaining wall Adbri Masonry Versawall™ units and Universal caps

Versawall ™ cross section - Raised planter

20mm drainage aggregate column and to fill block voids Existing soil

Adbri Masonry Versawall™ units and Universal caps

20mm drainage aggregate column and to fill block voids Garden soil

Ø100mm socked subsoil drain 2% fall to discharge at 20m max centres No structural load within this zone

Max 867mm high 4 courses + cap 450 x 130mm compacted roadbase or concrete pad

Max 867mm high 4 courses + cap 1

300mm

NOTE: Allow minimum 50mm ebeddment to cover leveling pad

1.5

450 x 130mm compacted roadbase or concrete pad

300mm

NOTE: Allow minimum 50mm ebeddment to cover leveling pad

Ø100mm socked subsoil drain 2% fall to discharge at 20m max centres

Maximum unreinforced height is 800mm plus the capping unit. This is four courses plus the cap. This wall can be constructed to heights in excess of 800mm when designed by an engineer and reinforced. Check with your local council for any further requirements regarding building retaining walls in your area.

BUILDING STEPS Versawall™ units can be used to create steps in your backyard. The simplest step design uses standard units with corner units. The Universal cap is then used as the step treads. Alternatively, bullnose pavers can also be used for step treads.

Cross Section

Landscape View


LAYING INSTRUCTIONS - How to build your own wall! Step 1

Step 2

Step 3

Step 4

Step 1 - Dig a shallow trench, level and place 100mm of crushed rock in the bottom. Level and compact. Allow for 50mm embedment of the bottom course and 300mm behind the wall for drainage.

Step 2 - Spread and level approximately 25mm of coarse sand as a bedding layer then place the first course of Versawall™ units. Use a stringline for creating a straight line, and level from side to side and front to back. Install a 90mm Agricultural Pipe (on grade) at the rear of the wall for drainage. Step 3 - Fill Versawall ™ cores and 300mm behind each course with granular rock for drainage and carefully compact. Check each course is level before proceeding and stacking each additional row offsetting from the block below to maintain half bond.

Step 4 - On the last course of stacking units, remove locating lugs on top of the Versawall ™ blocks, place a line of adhesive front and back and place the capping unit. Apply pressure to secure and use a stringline and level for the best result. (See Pic 3A and 3B)

Notes - Slope the soil above and below the wall to ensure that water will flow away from and not accumulate near the wall. - It is advisable to place a dob of adhesive between corner units.

How to build your own internal corner! Use standard Versawall™ units, remove locating lugs set corner at half bond. Fill cores and 300mm behind each course with granular rock for drainage and carefully compact.

Pic 1A

Pic 1B

Pic 2A

Pic 2B

How to build your own external corner! Use Versawall™ left and right corner units to construct an external corner. 1. Remove the two lugs from the corner unit prior to installing the following courses. 2. To finish the wall, mitre cut the caps and remove all locating lugs from the top of the block prior to securing capping units.

Pic 3A

Pic 3B

Even the corner units feature the unique self locating lugs which makes it very easy to create perfect 90 degree external corners.

Flinders Park 284 Grange Road, Flinders Park, SA 5025 phone: (08) 8234 7144 I fax: (08) 8234 9644

Kadina 86 Port Road, Kadina, SA 5554 phone: (08) 8821 2077 | fax: (08) 8821 2977

Hallet Cove 9-11 Commercial Road, Sheidow Park, SA 5158 phone: (08) 8381 9142 I fax: (08) 8381 7666

Gawler Cnr Main North & Tiver Rd, Evanston, SA 5116 phone: (08) 8522 2522 I fax: (08) 8522 2488

Lonsdale 13 Sherriffs Road, Lonsdale, SA 5160 phone: (08) 8381 2400 I fax: (08) 8381 2366

Streaky Bay 18 Bay Road, Streaky Bay, SA 5680 phone: (08) 8626 7011 I mob: 0427 263 050

Gepps Cross 700 Main North Road, Gepps Cross, SA 5094 phone: (08) 8349 5311 I fax: (08) 8349 5833

Mount Barker 4 Oborn Road, Mount Barker, SA 5251 phone: (08) 8391 3467 fax: (08) 8398 2518

Westbourne Park 455 Goodwood Rd, Westbourne Park, SA 5041 phone: (08) 8299 9633 I fax: 08) 8299 9688

Holden Hill 578 North East Road, Holden Hill, SA 5088 phone: (08) 8369 0200 I fax: (08) 8266 6855

Mount Gambier 6 Graham Road, Mount Gambier West, SA 5291 phone: (08) 8725 6019 I fax: (08) 8725 3724

Whyalla 132 Norrie Ave, Whyalla Norrie, SA 5608 phone: (08) 8644 0918 I mob: 0412 810 056


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.