Architectural Mansonry

Page 1

Architectural Architectural Masonry - Ref: CM.AM.0606

CM0506_K2094

Melbourne - Essendon (Head Office) 264 Keilor Road North Essendon, VIC 3041 phone: 03) 9375 8500 I fax: 03) 9374 4736

Bendigo 69 Collins Street Kangaroo Flat, VIC 3555 phone: 03) 5447 8866 I fax: 03) 5447 0399

Newcastle Old Maitland Road Sandgate, NSW 2304 phone: 02) 4967 3611 I fax: 02) 4960 1187

South Australia Cnr Grand Junction & Blakeney Rds Ottoway, SA 5013 phone: 08) 8304 2323 I fax: 08) 8341 1101

C&M Brick Pty Ltd ABN: 14 055 701 034

Canberra 6 Tennant Street Fyshwick, ACT 2609 phone: 02) 6239 1255 I fax: 02) 6280 7284

Nowra 270-274 Princes Hwy South Nowra, NSW 2541 phone: 02) 4421 3500 I fax: 02) 4421 3082

Sydney 20 Kelso Crescent Moorebank, NSW 2170 phone: 02) 9822 6822 I fax: 02) 9601 7446

www.cmbrick.com.au

Melbourne - Campbellfield 194 Northbourne Road Campbellfield, VIC 3061 phone: 03) 9305 0900 I fax: 03) 9303 9035


Architectural Masonry

C&M’s diverse range of architectural masonry products offers the architect and designer a variety of colour, style and texture providing an ideal and distinctive choice for both residential and commercial application. Styles and colours have been carefully selected to meet both traditional and modern design. With 2 standard aggregate bases, 8 colours and 5 finishes, it is possible to specify up to 80 combinations of colour, aggregate and surface texture.

Smooth Stone Coloured blocks in their natural moulded state.

Sandhurst Stone Coloured blocks with a split texture.

Pitched Stone Coloured blocks with a pitched texture.

Macquarie Stone Large coloured blocks with a pitched or split texture.

Oatmeal Honed Designer Masonry

Designer Masonry Honed Coloured blocks with a honed finish.

C&M believes quality is paramount to achieving a successful product. Accordingly, all C&M Architectural Masonry products are manufactured

Designer Masonry Shot-blast

with efflorescence inhibitors and colour fastening

Coloured blocks with a shot-blasted finish.

agents. These additives ensure reduced water absorption, minimisation of efflorescence, reduced mould and water staining and continued

front cover image: Oatmeal Sandhurst Stone & Oatmeal Honed Designer Masonry

colour vibrancy.


SUNSTONE

DEEP TAUPE

OATMEAL

SUNSTONE

DEEP TAUPE

IVORY

OATMEAL

SUNSTONE

DEEP TAUPE

Designer Masonry Honed River Gravel

OATMEAL

IVORY

Smooth Stone Designer Masonry Honed Golden Glaze

IVORY

Sandhurst, Pitched or Macquarie Stone

Smooth Stone

Colour Chart IVORY

OATMEAL

SUNSTONE

DEEP TAUPE

FOSSIL

FOSSIL

FOSSIL

FOSSIL

STEEL

STEEL

STEEL

STEEL

EBONY

EBONY

EBONY

EBONY

Sunstone Smooth Stone

*All Smooth Stone colours are also available in shot-blast finish.

BONDI BLEND

Technical Information Standards: All C&M Architectural Masonry products are manufactured to Australian Standards AS 4455 Masonry Units and Segmental Pavers and tested for compliance with AS 4456 Masonry Units and Segmental Pavers – Methods of Test. Mortar should be accurately batched and conform to AS3700. Control Joints: Should extend for the full height of the wall and be spaced at a maximum distance of 6 metres apart where walls are not interrupted by full height doorways or window openings (refer Australian Standards). Joint Reinforcement: Masonry mesh is recommended at height intervals of 600mm, and in the two courses above and below all openings. Lap mesh at least 150mm at all joints and intersections, except at control joints where a slip joint must be provided. For 90mm walling use 50mm reinforcement mesh and for 190mm walling use 150mm reinforcement mesh.

General Guidelines: All C&M Architectural Masonry products should be laid dry, so covering on site is recommended. Whenever work is stopped, the tops of walls should be covered to protect from moisture during construction. All mortar joints should be allowed to set to ‘thumb print’ hardness before tooling. Brush away excess mortar with a semi-stiff brush at the end of each day’s work.

Sound Transmission: The statutory requirements for sound attenuation are contained in the Building Code of Australia (BCA) which requires that some walls of some buildings be capable of preventing a large proportion of incident sound from passing from one wall side to the other. These requirements are set out in Section F5 of the BCA. Refer to C&M Fire and Sound brochure for more information.

Cleaning: Care should be taken to keep stone as clean as possible during laying. C&M recommend the guidelines within CMAA document MA41 Cleaning and Maintenance of Concrete Masonry Structures.

Ordering: C&M Architectural Masonry products are manufactured from natural materials and will vary in colour and texture from batch to batch. All products must be ordered at the one time to ensure that they are supplied from the same batch. Product should be blended from different pallets to ensure an even mix of colour throughout any given wall.

Fire Resistance: Australian Standard AS 3700 Masonry Structures sets out the method for determining fire resistance to walls. The Building Code of Australia requires walls to be designed for insulation, integrity & structural adequacy. C&M have had extensive CSIRO testing for FRL and subsequently have a large range of masonry products meeting the requirements of the building code. Refer to the C&M Fire and Sound brochure.

Claims: All product must be inspected prior to installation to ensure satisfaction of colour and texture. No claims will be accepted once product has been installed.

Sunstone Smooth Stone

C&M’s Smooth Stone offers a modern and creative alternative to standard masonry in a large format module. Create subtle textures and stunning effects by using C&M’s Smooth Stone either on its own or combined Oatmeal Smooth Stone

with other stone textures.


Sandhurst Stone

Sunstone Sandhurst Stone

Sandhurst Stone is a versatile masonry product lending itself to the design of both contemporary and traditional buildings. Sandhurst Stone is made by manufacturing larger solid units and then splitting into two to create a natural ‘split stone’ appearance. Exposing the natural aggregates, Sandhurst Stone is supplied in a variety of colours and an innovative range of product shapes and sizes. Sandhurst Stone may be used alone or combined with C&M’s many other finishes.


Macquarie Stone

Ivory Sandhurst Stone & Ivory Honed Designer Masonry

Oatmeal Sandhurst Stone

Full & Half Blocks in Bondi Blend

Bondi Blend Macquarie Stone with Smooth Bevelled Cornerstones

Macquarie Stone is the largest module masonry stone product available Equivalent to two standard bricks in length and three standard bricks in height and manufactured with complimentary components in split, pitched and smooth bevelled surface finishes, Macquarie Stone is the Smooth Bevelled Cornerstones

ultimate block for buildings reminiscent of the past whilst providing inspiration for designers of today. Oatmeal Sandhurst Stone Townhouse & Oatmeal Honed Designer Masonry fence


Pitched Stone

Oatmeal Pitched Stone with Oatmeal Smooth Stone and Ebony Honed Designer Masonry

Sunstone Pitched Stone

Flame (custom colour) Pitched Stone with Flame (custom colour) Smooth Stone as quoining and Ebony Honed Designer Masonry


Pitched Stone

Oatmeal Pitched Stone with Oatmeal Smooth Stone and Ebony Honed Designer Masonry

Sunstone Pitched Stone

Sunstone Pitched Stone with Smooth Stone corners

Pitched Stone is formed as per Sandhurst Stone but is then pitched from the sides to give a three dimensional look and feel to the face of the product. The result being that each piece gains its own unique appearance. Used in both contemporary and traditional projects with stunning effect, pitched stone can be used on its own or combined with C&M’s Smooth Stone or Designer Masonry for a truly distinctive finish. Flame (custom colour) Pitched Stone with Flame (custom colour) Smooth Stone as quoining and Ebony Honed Designer Masonry


Macquarie Stone

Full & Half Blocks in Bondi Blend

Bondi Blend Macquarie Stone with Smooth Bevelled Cornerstones

Macquarie Stone is the largest module masonry stone product available Equivalent to two standard bricks in length and three standard bricks in height and manufactured with complimentary components in split, pitched and smooth bevelled surface finishes, Macquarie Stone is the Smooth Bevelled Cornerstones

ultimate block for buildings reminiscent of the past whilst providing inspiration for designers of today.


Sandhurst Stone

Designer Masonry

Ebony Honed Designer Masonry with Golden Glaze Aggregate

All C&M Smooth Stone products can undergo additional value-added manufacturing processes to expose the stone aggregates with alternative textures. Textures available in Designer Masonry are: Honed The face of the product is ground to give a sharp look and feel while exposing the aggregate matrix. Shot-Blast The face of the product is shot-blasted creating a textured finish with a subtle hint of exposed aggregate. Ivory Honed Macquarie Stone with Golden Glaze Aggregate

Sunstone Sandhurst Stone

Sandhurst Stone is a versatile masonry product lending itself to the design of both contemporary and traditional buildings. Sandhurst Stone is made by manufacturing larger solid units and then splitting into two to create a natural ‘split stone’ appearance. Exposing the natural aggregates, Sandhurst Stone is supplied in a variety of colours and an innovative range of product shapes and sizes. Sandhurst Stone may be used alone or combined with C&M’s many other finishes.

Sunstone Honed Designer Masonry with Golden Glaze Aggregate


SUNSTONE

DEEP TAUPE

OATMEAL

SUNSTONE

DEEP TAUPE

IVORY

OATMEAL

SUNSTONE

DEEP TAUPE

Designer Masonry Honed River Gravel

OATMEAL

IVORY

Designer Masonry Honed Golden Glaze

IVORY

Sandhurst, Pitched or Macquarie Stone

Smooth Stone

Colour Chart IVORY

OATMEAL

SUNSTONE

DEEP TAUPE

FOSSIL

FOSSIL

FOSSIL

FOSSIL

STEEL

STEEL

STEEL

STEEL

EBONY

EBONY

EBONY

EBONY

*All Smooth Stone colours are also available in shot-blast finish.

BONDI BLEND

Technical Information Standards: All C&M Architectural Masonry products are manufactured to Australian Standards AS 4455 Masonry Units and Segmental Pavers and tested for compliance with AS 4456 Masonry Units and Segmental Pavers – Methods of Test. Mortar should be accurately batched and conform to AS3700. Control Joints: Should extend for the full height of the wall and be spaced at a maximum distance of 6 metres apart where walls are not interrupted by full height doorways or window openings (refer Australian Standards). Joint Reinforcement: Masonry mesh is recommended at height intervals of 600mm, and in the two courses above and below all openings. Lap mesh at least 150mm at all joints and intersections, except at control joints where a slip joint must be provided. For 90mm walling use 50mm reinforcement mesh and for 190mm walling use 150mm reinforcement mesh.

General Guidelines: All C&M Architectural Masonry products should be laid dry, so covering on site is recommended. Whenever work is stopped, the tops of walls should be covered to protect from moisture during construction. All mortar joints should be allowed to set to ‘thumb print’ hardness before tooling. Brush away excess mortar with a semi-stiff brush at the end of each day’s work.

Sound Transmission: The statutory requirements for sound attenuation are contained in the Building Code of Australia (BCA) which requires that some walls of some buildings be capable of preventing a large proportion of incident sound from passing from one wall side to the other. These requirements are set out in Section F5 of the BCA. Refer to C&M Fire and Sound brochure for more information.

Cleaning: Care should be taken to keep stone as clean as possible during laying. C&M recommend the guidelines within CMAA document MA41 Cleaning and Maintenance of Concrete Masonry Structures.

Ordering: C&M Architectural Masonry products are manufactured from natural materials and will vary in colour and texture from batch to batch. All products must be ordered at the one time to ensure that they are supplied from the same batch. Product should be blended from different pallets to ensure an even mix of colour throughout any given wall.

Fire Resistance: Australian Standard AS 3700 Masonry Structures sets out the method for determining fire resistance to walls. The Building Code of Australia requires walls to be designed for insulation, integrity & structural adequacy. C&M have had extensive CSIRO testing for FRL and subsequently have a large range of masonry products meeting the requirements of the building code. Refer to the C&M Fire and Sound brochure.

Claims: All product must be inspected prior to installation to ensure satisfaction of colour and texture. No claims will be accepted once product has been installed.


Architectural Masonry

Dimensions (mm) LxHxW

The Range Honed

Shot Blasted

90

190 x 190 x

90

1/4 Length Hollow (Vic only)

90 x 190 x

90

10.31

Full Length Solid*

390 x 190 x

90

10.33

1/2 Length Solid (Vic only)

190 x 190 x

90

15.01

Full Length Hollow

390 x 190 x 140

15.22

Corner Hollow

340 x 190 x 140

15.03

1/2 Length Hollow (Vic only)

190 x 190 x 140

Smooth Stone

20.01

Full Length Hollow

390 x 190 x 190

Coloured blocks in their natural moulded state.

20.03

1/2 Length Hollow (Vic only)

190 x 190 x 190

10.101

Full Length*

390 x 190 x

90

10.103

1/2 Length (Vic only)

190 x 190 x

90 90

10.01

Full Length Hollow

390 x 190 x

90

10.02

3/4 Length Hollow (Vic only)

290 x 190 x

C&M’s diverse range of architectural masonry products offers the architect and designer a variety of colour, style and texture providing an ideal and distinctive choice for both residential and commercial application.

10.03

1/2 Length Hollow (Vic only)

10.04

Styles and colours have been carefully selected to meet both traditional and modern design. With 2 standard aggregate bases, 8 colours and 5 finishes, it is possible to specify up to 80 combinations of colour, aggregate and surface texture.

Sandhurst Stone

10.109

1/2 Height

390 x

Sandhurst Stone

15.101

Full Length

Coloured blocks with a split texture.

20.101

90 x

12.5

12.5

12.5

12.5

390 x 190 x 140

12.5

Full Length

390 x 190 x 190

12.5

20.103

1/2 Length (Vic only)

190 x 190 x 190

10.111

Full Length*

390 x 190 x

90

Pitched Stone

10.113

1/2 Length

190 x 190 x

90

Coloured blocks with a pitched texture.

20.111

Full Length

390 x 190 x 190

20.113

1/2 Length

190 x 190 x 190

10.LQ

Cornerstone

390 x 190 x 190 x 90

10.LQS

Cornerstone

390 x 190 x 190 x 90

10.LQP

Cornerstone

390 x 190 x 190 x 90

20.105

Cornerstone (n/a in Vic)

390 x 190 x 190

20.115

Cornerstone (n/a in Vic)

390 x 190 x 190

10.39

Sill Block

190 x 190 x

90

20.39

Sill Block

190 x 190 x 190

10.248

Full Length

470 x 248 x 105

10.249

Cornerstone

10.250

Cornerstones

Macquarie Stone Large coloured blocks with a pitched or split texture.

Oatmeal Honed Designer Masonry

Designer Masonry Honed Coloured blocks with a honed finish.

C&M believes quality is paramount to achieving

Macquarie Stone

12.5

• •

• • •

8

1/2 Length

230 x 248 x 105

10.252

Full Length Bevelled

470 x 248 x 105

absorption, minimisation of efflorescence,

10.253

1/2 Length Bevelled

reduced mould and water staining and continued

10.620

Bevelled Cornerstone

with efflorescence inhibitors and colour fastening

Coloured blocks with a shot-blasted finish.

agents. These additives ensure reduced water

colour vibrancy.

*1 in 8 is a universal block for fractions

335 x 248 x 105

Designer Masonry Shot-blast

• Custom colours and/or aggregates may be available on request. Please consult your C&M representative.

Architectural Masonry products are manufactured

• C&M Designer Masonry requires a secondary manufacturing process that requires additional lead time to C&M’s other Architectural Masonry products.

a successful product. Accordingly, all C&M

front cover image: Oatmeal Sandhurst Stone & Oatmeal Honed Designer Masonry

Sill Blocks

• C&M Architectural Masonry is made to order, please remember to check lead times when placing your order.

• Additional fractions can be made by cutting, splitting or bolstering blocks on site, which minimises batch variation.

• 12.5

Notes

• Quantities per pallet may vary from state to state, please refer to your C&M representative for further details.

• 25

Pitched Stone

Pitched

Smooth Stone

Split

Smooth

Description

Type

12.5

Product

No per m2

Textures

** **

230 x 248 x 105

** **

470 x 248 x 235 x105

8

** Secondary process is applied to the reverse side of these blocks


Architectural Architectural Masonry - Ref: CM.AM.0606

CM0506_K2094

Melbourne - Essendon (Head Office) 264 Keilor Road North Essendon, VIC 3041 phone: 03) 9375 8500 I fax: 03) 9374 4736

Bendigo 69 Collins Street Kangaroo Flat, VIC 3555 phone: 03) 5447 8866 I fax: 03) 5447 0399

Newcastle Old Maitland Road Sandgate, NSW 2304 phone: 02) 4967 3611 I fax: 02) 4960 1187

South Australia Cnr Grand Junction & Blakeney Rds Ottoway, SA 5013 phone: 08) 8304 2323 I fax: 08) 8341 1101

C&M Brick Pty Ltd ABN: 14 055 701 034

Canberra 6 Tennant Street Fyshwick, ACT 2609 phone: 02) 6239 1255 I fax: 02) 6280 7284

Nowra 270-274 Princes Hwy South Nowra, NSW 2541 phone: 02) 4421 3500 I fax: 02) 4421 3082

Sydney 20 Kelso Crescent Moorebank, NSW 2170 phone: 02) 9822 6822 I fax: 02) 9601 7446

www.cmbrick.com.au

Melbourne - Campbellfield 194 Northbourne Road Campbellfield, VIC 3061 phone: 03) 9305 0900 I fax: 03) 9303 9035



Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.