Gas Shielded, Peripheric Continuous Electrode for Semi-Automatic and Automatic Robotic Welding ®
EnDOtec DO*11
WIRE • High density of cast tungsten carbide particles evenly distributed in a nickel matrix • Extremely abrasion resistant even in corrosive media • Higher deposition rates for reduced labor costs • More versatile welding parameters that the competition
DESCRIPTION:
PROCEDURE FOR USE:
Exclusive, gas shielded, metal cored alloy wire ideal for maintenance and repair applications or batch manufacturing where the highest integrity welding, efficiency and productivity are required.
Remove old welding deposits and worn metal with ChamferTrode. Degrease and remove all contaminant’s. Pre-heating temperatures are determined by base metal. Push or pull the electrode at an angle of 70-80° to ensure optimal fusion. If required, a second pass should only be deposited while the weld is still hot.
The slag-free deposit features a high density of Cast Tungsten Carbide particles evenly distributed in a nickel matrix. This gives exceptional resistance to abrasive and erosive particles with moderate impact and is specifically for applications in hot or corrosive environments.
TECHNICAL DATA:
TYPICAL APPLICATIONS Designed for anti-wear coatings on carbon steel, alloy steels, stainless steels and nickel alloys. Typical industries include agriculture, food and beverage, oil drilling operations, pulp and paper and chemical processing.
Typical Matrix Hardness: 55 HRC Micro Hardness of Carbide: 2200 HV Machinability: Grind Only Shielding Gas: 98% Ar / 2%O2 Diameter of Wire: 1/16” (1.6mm) Polarity: DCEP(+) Weight: 33 Lb Spool
• High speed fan blades • Ash handling systems • Brick and tile extruders • Sintering parts • Slag breakers
• Screw conveyers • Press rolls • Mixers & paddles • Stabilizers • Transfer chutes
TYPICAL WELDING PARAMETERS 1/16” (1.6MM)
TRANSFER
VOLTAGE
AMPERAGE
STICK-OUT
GAS FLOW
Typical
Short-Arc
18 - 22
140 MAX
½” - ¾”
25-35 SCFH
Optimum
Short-Arc
20
110-120
½” - ¾”
30 SCFH
YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS Eutectic Corporation N94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USA P 800-558-8524 • F 262-255-5542 www.eutectic-usa.com
Eutectic Canada 428, rue Aime Vincent Vaudreuil-Dorion, Quebec J7V 5V5 Phone: (800) 361-9439 Fax: (514) 695-8793 www.eutectic-na.com
Eutectic Mexico KM 36.5 Autopista Mexico-Quertaro 54730 Cautitlan-Izcalli Estado de Mexico, Mexico Phone: 011 (52) 55-5872-1111 e-mail: eutectic.mexico@eutectic.com.mx
Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof. DO11 07-20-12© 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.