Xuper-146-XFC

For Oxy-Fuel Braze Welding Broken and Fractured Gray and Medium-Strength Alloyed Cast Irons

Xuper 146 XFC ®

BRAZING • Recommended for use on cast iron where color matching isn't important • Highly active flux promotes eas of wetting and excellent bonding • Deposits are easily machined or drilled

DESCRIPTION

PROCEDURE FOR USE

Xuper 146XFC is a copper-base, flux-coated brazing rod for repairing cracks and buildup repairs of cast irons when color matching is not important and when easily machined and drilled deposits are required. The highly active flux promotes ease of wetting and excellent bonding.

Preparation: Clean joint and/or broken parts. Bevel cracks either by pneumatic chiseling or by grinding.

TECHNICAL DATA Typical Tensile Strength: 65,000 psi (450 N/mm2) Typical Hardness: 80 HRB Color Match Properties Deposits are brass-yellow Bonding Temperature: 1600° to 1650°F Preheating: 500° to 700°F

Note: When grinding make sure not to “color” the surface that indicates overheating and potential hard-spotting. Align parts and preheat within the recommended 500° to 700°F temperature-range.

Technique: Rapidly sear the joint by using an excess oxygen flame. Apply a small amount of EutecTor 16D as a supplemental flux along the joint area and lightly “tin” the surfaces to be joined using a neutral flame. After tinning apply filler metal using a continuous “drop-and-melt” technique. Continue until the joint is slightly overfilled.

Note: Any excess “glassy” flux residue can be readily removed by light scraping.

TYPICAL APPLICATIONS Although formulated for cast iron components such as cast iron brackets, end-flanges, malleable piping and agricultural implements, Xuper 146XFC is also recommended for car body repairs, light tubular constructions, and sheet metal fabrications.

Post-brazing: Allow the brazed casting to slow-cool either by covering in vermiculite, wrapping in a heat-retardant blanket, or by burying in lime.

YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS Eutectic Corporation

Eutectic Canada

Eutectic Mexico

N94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USA P 800-558-8524 • F 262-255-5542 www.eutecticusa.com

428, rue Aime Vincent Vaudreuil-Dorion, Quebec J7V 5V5 Phone: (800) 361-9439 Fax: (514) 695-8793 www.eutectic-na.com

KM 36.5 Autopista Mexico-Quertaro 54730 Cautitlan-Izcalli Estado de Mexico, Mexico Phone: 011 (52) 55-5872-1111 e-mail: eutectic@eutectic.com.mx

Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof.

Xuper146 DS-04-16-12