General Purpose White Brazing Flux
XuperBraze 100 ®
BRAZING • Formulated as a general purpose brazing flux for silver alloy filler metals • A white, ultra-creamy paste containing 100% of very fine minus 325-mesh solids • An active temperature range of 540°C (1000°F) - 927°C (1700°F) • No flash point - water base • No recrystallization effects • Appropriate filler metals are BAg and BCup group alloys • Meets the following specifications: 1). AWS A5.31-92 TYPE FB3A 2). AMS 3410 3). Federal Specification O-F, 499 TYPE B.
DESCRIPTION: XuperBraze 100 is an ultra-creamy, water-base, general purpose brazing flux paste incorporating a proprietary blend of compounds. It is recommended for use with torch, induction, furnace, resistance, dip and other heating methods. XuperBraze 100 is formulated for brazing brasses, coppers, carbon steels, stainless steels, precious metals, and nickel alloys. XuperBraze 100 is perfect for applications using a brush, dip, or spray. It has excellent wetting and its vertical adherence both before and during heating is outstanding. There is no spatter upon heating this flux. It can be diluted, if necessary, with distilled or deionized water without spatter. XuperBraze 100 provides outstanding surface oxide removal, surface protection, staying power, and wetting, to produce optimum braze joints. The residue of XuperBraze 100 is easy to remove with hot water (warm water may be used if hot water is unavailable). XuperBraze 100 has a long storage life without crystallizing or caking and conforms to many specifications.
TYPICAL APPLICATIONS: APPLICATION
INDUSTRY
Air conditoner tube fixtures Copper-base plumbing fixtures Cooling assemblies, industrial freezer assemblies Office chairs (steel) Stainless steel tube assemblies Spectacle frames Various containers (brass, copper, S/S) Kitchen faucets & bath fixtures Jewely, musical instruments, etc.
Domestic & Automotive Primary Plumbing & Parts White Goods/ Freezer Mfg‘s Furniture Mfg. Automotive Parts Fabrication Instrument/Cosmetic Automatec Spray Equipment Mfg‘s Domestic Hardware Mfg‘s Various
HEALTH AND SAFETY: Observe normal brazing and welding practices, respiratory protection and proper air flow pattern advised. For general welding and brazing practices, see AWS publications Z49.1 “Safety in Welding and Cutting and Allied Process”. Welding and brazing are completely safe processes when performed in accordance with proper safety measures. Become familiar with local safety regulations before beginning welding or brazing operations. DO NOT operate brazing or welding equipment or use brazing and welding materials before you have thoroughly read the proper instruction manual(s). Please refer to the Eutectic internet site for Material Safety Data Sheet (MSDS) information. DISREGARDING THESE INSTRUCTIONS, AND/OR THE INSTRUCTIONS OF BRAZING EQUIPMENT OR MATERIAL MANUALS, MAY BE HAZARDOUS TO YOUR HEALTH.
YOUR RESOURCE FOR PROTECTION, REPAIR AND JOINING SOLUTIONS Eutectic Corporation N94 W14355 Garwin Mace Drive Menomonee Falls, WI 53051 USA P 800-558-8524 • F 262-255-5542 www.eutecticusa.com
Eutectic Canada 428, rue Aime Vincent Vaudreuil-Dorion, Quebec J7V 5V5 Phone: (800) 361-9439 Fax: (514) 695-8793 www.eutectic-na.com
Eutectic Mexico KM 36.5 Autopista Mexico-Quertaro 54730 Cautitlan-Izcalli Estado de Mexico, Mexico Phone: 011 (52) 55-5872-1111 e-mail: eutectic@eutectic.com.mx
Statement of Liability: Due to variations inherent in specific applications, the technical information contained herein, including any information as to suggested product applications or results, is presented without representation or warranty, expressed or implied. Without limitation, there are no warranties of merchantability or of fitness for a particular purpose. Each process and application must be fully evaluated by the user in all respects, including suitability, compliance with applicable law and non-infringement of the rights of others, and Eutectic Corporation and its affiliates shall have no liability in respect thereof. 100 05-18-12© 2008, Eutectic Corporation, ® Reg. T.M., Printed in the U.S.A.