Bo25k13610d optical fiber transceiver

BO25K13610D Optical Fiber Transceiver

Superior Performance The BlueOpticsŠ BO25K13610D Quad Small Form-Factor Pluggable (QSFP) transceiver with LC duplex connector from CBO is designed for long-range single-mode 40 Gigabit Ethernet (40GbE), 40 Gigabit Fibre Channel over Ethernet (40Gb FCoE) or OC-768/STM256 SDH/SONET high-speed applications of up to 41.25 gigabits per second.

Wide Range of Applications The BlueOptics BO25K13610D QSFP transceiver for data transfers, for example between data centers or Internet nodes, with electrical high-speed interface, operates using the 40GBASE-LR4 technology.

The BlueOptics BO25K13610D QSFP transceiver therefore has a 4channel CWDM Mux/Demux inside and transmits the wavelengths

1271nm, 1291nm, 1311nm, 1331nm. Over a G.652 fiber link this module achieves a transmission distance of up to 10 kilometers.

Data Transmission at the Speed of Light Increase your bandwidth and lower the latency. BlueOptics BO25K13610D QSFP transceivers transmit and receive signals via one optical fiber and have a LC Duplex connector. The connection takes place via a BlueOptics Patch Cord onto a patch panel or directly to another transceiver.

Error Analysis with Digital Diagnostics Facilitate troubleshooting, maintenance and monitoring in your network through the Digital Diagnostics Monitoring (DDM) / Digital Optical Monitoring (DOM) interface.

Using the digital diagnosis function, compliant with MSA SFF-8472, BlueOptics BO25K13610D QSFP transceivers provide real time information like Supply Voltage, Laser Bias

Current, Laser Average Output Power, Laser Received Input Power and Temperature.

Maximum Availability Less maintenance due to a long lifetime.

BlueOptics BO25K13610D QSFP transceivers only use components of leading manufacturers for Lasers (i.a.

Lumentum, Avago, Mitsubishi, Sumitomo) and Integrated Circuits.

BlueOptics BO25K13610D QSFP transceivers are designed for an above-average operating time of approximately 3.000.000 MTBF hours.

Industrial Standards BlueOptics BO25K13610D high availability QSFP transceivers meet or exceed industrial standards, such as CE and RoHS as well as the regulations of the FCC. Through continuous monitoring before, during and after the production process, according to ISO9001, CBO reaches a steady quality of each BlueOptics BO25K13610D QSFP transceiver.

Act now! By using BlueOptics high availability transceivers, networks can be prepared for increasing demands.

Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability are desired.

ABOUT CBO The CBO GmbH, located in MĂźlheim-Ruhr, Germany, is a manufacturer of active and passive networks components.

We are specialized in the production of optical transmission solutions, fiber solutions and datacenter components.