Aceleds catalog constant voltage by Cedric E Lyons

LED DRIVERS CONSTANT VOLTAGE CATALOG

www.aceleds.com

Constant Voltage LED Driver

Model Number ACA100VD24H4.1C

LLC

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

DESIGN

Dimming ELECTRICAL SPECIFICATIONS: Output Power

Input Power

Input Current

Minimum PF (full load)

100W

110W

0.98A @ 120V 0.42A @ 277V

>0.95

New Improved - Effective June 1, 2015 Max. THD (full load)

Output Voltage

Output Current

T case Maximum

Minimum Starting Temp.

Efficiency Up To

Dimming Protocol

Dimming Range

<10%

24V ±5%

4200mA ±10%

90° C

-40° C

90%

0 to 10V

10 to 100%

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Purple Gray

9.8" 9.8"

Length Width Height Mounting Length Weight Case Qty.

15.55" 1.49" 1.14" 15.23" xx lbs. xx pcs.

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <90°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2.5 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 25 ft • LED driver cases should be grounded

*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.

3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.com Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A150VD36H4.2

POWER DESIGNS

A division of AC Electronics

LLC

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads New Improved - Effective June 1, 2015

DESIGN

Dimming ELECTRICAL SPECIFICATIONS: Output Power Max

Input Current

Input Power

Minimum PF (full load)

Max. THD (full load)

Output Voltage

Output Current

T case Maximum

Minimum Starting Temp.

Efficiency Up To

Dimming Protocol

Dimming Range

IP Rating

150W

1.48A @ 120V 0.62A @ 277V

163

>0.95

<20%

36V ±5%

4200mA ±10%

90° C

-40° C

92%

0 to 10V

0 to 100%

IP66

150W

1.48A @ 120V 0.62A @ 277V

163

>0.95

<20%

30V ±5%

500mA ±5%

90° C

-40° C

92%

0 to 10V

0 to 100%

IP66

WIRING:

PHYSICAL:

Dimensions

Wiring Lead Lengths White Black

5.9" Red 5.9" Brown 5.9" 5.9" Blue 5.9" Orange 5.9"

Gray Purple

5.9" 5.9"

Length Width Height Mounting Length Weight Case Qty.

9.5" 2.4" 1.6" 8.9" 2.64 lbs. 20 pcs.

SAFETY: • UL Recognized • cUL Recognized • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <90°C • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2.5 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

Constant Voltage LED Driver

Model Number AC100VD24A4.1PG Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

Dimming ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Minimum PF (full load)

Max. THD (full load)

Output Voltage

Output Current

T case Maximum

Minimum Starting Temp.

Efficiency Up To

Dimming Protocol

Dimming Range

IP Rating

100W

0.98A @ 120V 0.42A @ 277V

>0.95

<10%

24V ±5%

0.41 to 4.1A

90° C

-40° C

87%

0 to 10V

10 to 100%

IP66

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Purple Gray

9.8" 9.8"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

9.5" 2.4" 1.46" 8.9" 1.5" .20" 1.98 lbs. 20 pcs.

SAFETY: • UL US Class 2 • cUL LVLE • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

E332747 Class 2

RoHS COMPLIANT L E A D - F R E E

Constant Voltage LED Driver

Model Number AC-A100V24I4.1

LLC

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads New Improved - Effective June 1, 2015

DESIGN

ELECTRICAL SPECIFICATIONS: Output Power

Input Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

100W

110W

0.98A @ 120V 0.42A @ 277V

0.95

10%

24V ±5%

4200mA ±10%

90° C

-40° C

90%

IP67

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

12" 12"

Blue Red

24" 24"

Green

12"

• Input SJTW Type 18AWG wires, pre-stripped: 1.125”; unwrapped: .125” • Output wires 24” pre-stripped: 1.125”; unwrapped: .125”

Length

9.5"

Width

2.4"

Height

1.61"

Mounting Length

8.9"

Mounting Hole Distance

1.5"

Mounting Hole Diameter

.20"

Weight

1.98 lbs.

Case Qty.

20 pcs.

SAFETY: • UL and cUL certified • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of 90°C; • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2.5 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 25 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A150V36H4.21

POWER DESIGNS

A division of AC Electronics

LLC

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads New Improved - Effective June 1, 2015

DESIGN

ELECTRICAL SPECIFICATIONS: Output Power Max

Input Current

Input Power

Minimum PF (full load)

Max. THD (full load)

Output Voltage

Output Current

T case Maximum

Minimum Starting Temp.

Efficiency Up To

IP Rating

150W

1.48A @ 120V 0.62A @ 277V

163W

>0.95

<20%

36V ±5%

4200mA ±10%

90° C

-40° C

92%

IP66

150W

1.48A @ 120V 0.62A @ 277V

163W

>0.95

<20%

30V ±5%

500mA ±10%

90° C

-40° C

92%

IP66

WIRING:

PHYSICAL:

Dimensions

Lead Lengths - 1.5" Stripped White Black

5.9" 5.9"

Red Blue

5.9" 5.9"

Brown Orange

5.9" 5.9"

Length Width Height Mounting Length Weight Case Qty.

9.5" 2.4" 1.6" 8.9" 2.64 lbs. 20 pcs.

SAFETY: • UL Recognized • cUL Recognized • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 25 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A150V36H4.2

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads ELECTRICAL SPECIFICATIONS: Output Power Max

Input Current

Input Power

Minimum PF (full load)

Max. THD (full load)

Output Voltage

Output Current

T case Maximum

Minimum Starting Temp.

Efficiency Up To

IP Rating

150W

1.48A @ 120V 0.62A @ 277V

172W

>0.95

<20%

36V ±5%

4.2A

90° C

-40° C

89%

IP66

150W

1.48A @ 120V 0.62A @ 277V

172W

>0.95

<20%

30V ±5%

90° C

-40° C

89%

IP66

WIRING:

PHYSICAL:

Dimensions

Wiring Lead Lengths White Black

5.9" 5.9"

Red Blue

5.9" 5.9"

Brown Orange

5.9" 5.9"

Length Width Height Mounting Length Weight Case Qty.

9.5" 2.4" 1.6" 8.9" 2.64 lbs. 20 pcs.

SAFETY: • UL Recognized • cUL Recognized • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Current LED Driver

Model Number AC-A100VD24H4.1

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

Dimming ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Minimum PF (full load)

Max. THD (full load)

Output Voltage

Output Current

T case Maximum

Minimum Starting Temp.

Efficiency Up To

Dimming Protocol

Dimming Range

IP Rating

100W

0.98A @ 120V 0.42A @ 277V

>0.95

<10%

24V ±5%

0.41 to 4.1A

90° C

-40° C

87%

0 to 10V

10 to 100%

IP66

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Purple Gray

9.8" 9.8"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

9.5" 2.4" 1.46" 8.9" 1.5" .20" 1.98 lbs. 20 pcs.

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A100V24H4.1

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

100W

0.98A @ 120V 0.42A @ 277V

>0.98

<10%

24V ±5%

0.41 to 4.1A

90° C

-40° C

88%

IP66

WIRING:

PHYSICAL:

Dimensions

Wiring Lead Lengths White Black Red Blue

5.9" 5.9" 5.9" 5.9"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

9.5" 2.4" 1.46" 8.9" 1.5" .20" 1.98 lbs. 20 pcs.

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A60V24H2.5

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

60W

0.6A @ 120V 0.26A @ 277V

>0.95

<20%

24V ±5%

0.25 to 2.5A

90° C

-40° C

87%

IP66

WIRING:

PHYSICAL:

Dimensions

Wiring Lead Lengths White Black Red Blue

5.9" 5.9" 5.9" 5.9"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

9.5" 1.7" 1.14" 8.9" 1.0" .20" 1.32 lbs. 30 pcs.

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A60VD12H5.0

POWER DESIGNS

Dimming

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Minimum PF (full load)

Max. THD (full load)

Output Voltage

Output Current

T case Maximum

Minimum Starting Temp.

Efficiency Up To

Dimming Protocol

Dimming Range

IP Rating

60W

0.61A @ 120V 0.27A @ 277V

>0.95

<10%

12V ±5%

0.5 to 5A

90° C

-40° C

83.7%

0 - 10V

100% - 10%

IP66

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Purple Gray

9.8" 9.8"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

9.5" 1.7" 1.14" 8.9" 1.0" .20" 1.32 lbs. 30 pcs.

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A60V24H2.5

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

60W

0.6A @ 120V 0.26A @ 277V

>0.95

<20%

24V ±5%

0.25 to 2.5A

90° C

-40° C

87%

IP66

WIRING:

PHYSICAL:

Dimensions

Wiring Lead Lengths White Black Red Blue

5.9" 5.9" 5.9" 5.9"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

9.5" 1.7" 1.14" 8.9" 1.0" .20" 1.32 lbs. 30 pcs.

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A60V12H5.0

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

60W

0.61A @ 120V 0.27A @ 277V

>0.95

<15%

12V ±5%

0.5 to 5A

90° C

-40° C

87%

IP66

WIRING:

PHYSICAL:

Dimensions

Wiring Lead Lengths White Black Red Blue

5.9" 5.9" 5.9" 5.9"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

9.5" 1.7" 1.14" 8.9" 1.0" .20" 1.32 lbs. 30 pcs.

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A50V24H2.1C

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

50W

0.49A @ 120V 0.21A @ 277V

>0.95

<10%

24V ±5%

0.21 to 2.1A

90° C

-40° C

86.2%

IP66

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

6.77" 2.40" 1.22" 6.22" 1.26" .28" 1.05 lbs. 40 pcs.

WIRING:

PHYSICAL:

Dimensions

Wiring Lead Lengths White Black Red Blue

5.9" 5.9" 5.9" 5.9"

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A25VD24H1.04

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

Dimming ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Minimum PF (full load)

Max. THD (full load)

Output Voltage

Output Current

T case Maximum

Minimum Starting Temp.

Efficiency Up To

Dimming Protocol

Dimming Range

IP Rating

25W

0.26A @ 120V 0.12A @ 277V

>0.95

<10%

24V ±5%

0.104 to 1.04A

90° C

-40° C

82%

0 to 10V

10 to 100%

IP66

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Purple Gray

9.8" 9.8"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

9.5" 1.7" 1.14" 8.9" 1.0" .20" 1.32 lbs. 30 pcs.

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A25VD12H2.08

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

Dimming ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Minimum PF (full load)

Max. THD (full load)

Output Voltage

Output Current

T case Maximum

Minimum Starting Temp.

Efficiency Up To

Dimming Protocol

Dimming Range

IP Rating

25W

0.27A @ 120V 0.12A @ 277V

>0.95

<10%

12V ±5%

0.21 to 2.08A

90° C

-40° C

80%

0 to 10V

10 to 100%

IP66

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Purple Gray

9.8" 9.8"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

9.5" 1.7" 1.14" 8.9" 1.0" .20" 1.32 lbs. 30 pcs.

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A25V24H1.04C

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

25W

0.26A @ 120V 0.12A @ 277V

>0.95

<10%

24V ±5%

0.104 to 1.04A

90° C

-40° C

80%

WIRING:

PHYSICAL:

Dimensions Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

4.9" 2.5" 1.14" 4.48" 1.57" .20" .61 lbs. 40 pcs.

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A25V24H1.04

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

25W

0.26A @ 120V 0.12A @ 277V

>0.95

<15%

24V ±5%

0.104 to 1.04A

90° C

-40° C

82%

IP66

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

9.5" 1.7" 1.14" 8.9" 1.22" .20" 1.32 lbs. 30 pcs.

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A25V12H2.08

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Input Voltages

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

120V to 277V 50/60Hz

0.27A @ 120V 0.12A @ 277V

0.95

15%

12V ±5%

0.21 to 2.08A

90° C

-40° C

81.5%

IP66

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

9.5" 1.7" 1.2" 8.9" 1.0" .20" 1.32 lbs. 30 pcs.

SAFETY: • UL and cUL certified • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A20V12H1.67M

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

20W

0.2A @ 120V 0.09A @ 277V

>0.9

<20%

12V ±5%

0.16 to 1.66A

90° C

-40° C

84%

IP66

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Length Width Height Mounting Length Weight Case Qty.

4.21" 1.41" 1.14" 3.9" .44 lbs. 100 pcs.

SAFETY: • UL and cUL Recognized • UL Outdoor Type 1 • Class A sound rating • Overload Protection • No PCBs

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A12V36H0.33M

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

12W

0.14A @ 120V 0.06A @ 277V

>0.9

<25%

36V ±5%

0.03 to 0.33A

90° C

-40° C

78.6%

IP66

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Length Width Height Mounting Length Weight Case Qty.

4.21" 1.41" 1.14" 3.9" .44 lbs. 100 pcs.

SAFETY: • UL and cUL Recognized, Class 2 • UL Outdoor Type 1 • Class A sound rating • No PCBs • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A12V24H0.5M

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

12W

0.122A @ 120V 0.055A @ 277V

>0.90

<15%

24V ±5%

0.05 to 0.5A

90° C

-40° C

78.6%

IP66

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Length Width Height Mounting Length Weight Case Qty.

4.21" 1.41" 1.14" 3.9" .44 lbs. 100 pcs.

SAFETY: • UL and cUL Recognized, Class 2 • UL Outdoor Type 1 • Class A sound rating • No PCBs • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

Constant Voltage LED Driver

Model Number AC-A12V24H0.5 Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

12W

0.14A @ 120V 0.06A @ 277V

0.95

15%

24V ±5%

0.05 to 0.5A

90° C

-40° C

74%

IP66

WIRING:

PHYSICAL:

Dimensions

Wiring Lead Lengths White Black Red Blue

5.9" 5.9" 5.9" 5.9"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

6.22" 1.73" 1.22" 5.87" 1.02" .20" .75 lbs. 50 pcs.

SAFETY: • UL and cUL certified • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned stranded copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-A12V12H1.0M

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

ELECTRICAL SPECIFICATIONS: Input Voltages

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

120V to 277V 50/60Hz

0.124A @ 120V 0.06A @ 277V

>0.90

<20%

12V ±5%

0.1 - 1A

90° C

-40° C

80%

IP66

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Length Width Height Mounting Length Weight Case Qty.

4.21" 1.41" 1.14" 3.9" .44 lbs. 100 pcs.

SAFETY: • UL and cUL Recognized • UL Outdoor Type 1 • Class A sound rating • Overload Protection • No PCBs

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-150VD36AEB

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

Dimming ELECTRICAL SPECIFICATIONS: Output Power Max

Input Current

Minimum PF (full load)

Max. THD (full load)

Output Voltage

Output Current

T case Maximum

Minimum Starting Temp.

Efficiency Up To

Dimming Protocol

Dimming Range

IP Rating

150W

1.48A @ 120V 0.62A @ 277V

>0.95

<20%

36V ±5%

4.2A

90° C

-40° C

89%

0 to 10V

5 to 100%

IP66

WIRING:

PHYSICAL:

Dimensions

Wiring Lead Lengths White Black

5.9" Red 5.9" Gray 5.9" Blue 5.9" Purple

5.9" 5.9"

Length Width Height Mounting Length Weight Case Qty.

9.5" 2.4" 1.6" 8.9" 2.43 lbs. 20 pcs.

SAFETY: • UL Recognized • cUL Recognized • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-150V36AEA

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads ELECTRICAL SPECIFICATIONS: Output Power Max.

Input Current

Input Power

Minimum PF (full load)

Max. THD (full load)

Output Voltage

Output Current

T case Max.

Minimum Starting Temp.

Efficiency Up To

Surge Protection

IP Rating

150W

1.48A @ 120V 0.62A @ 277V

172W

>0.95

<20%

36V ±5%

4.2A

90° C

-40° C

89%

2 KV

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Length Width Height Mounting Length Weight Case Qty.

9.5" 2.4" 1.6" 8.9" 2.43 lbs. 20 pcs.

SAFETY: • UL Recognized • cUL Recognized • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

Constant Voltage LED Driver

Model Number AC-60VD36B1.7LW Input Voltage: 347V Input Frequency: 50/60Hz Side Mount/Leads

Dimming ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Input Power

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Min. Starting Temp

Efficiency Up To

Dimming Protocol

Dimming Range

60W

0.2A @ 347V

71W

>0.9

<20%

36V ±5%

1.67 to 0.167A

90° C

-40° C

88%

0 to 10V

10 to 100%

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Purple Gray

9.8" 9.8"

Length Width Height Mounting Length Weight Case Qty.

9.5" 1.7" 1.14" 8.9" xx lbs. xx pcs.

SAFETY: • UL and cUL Recognized • Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • IP 66 Harsh Weatherproof • Max Remote installation distance is 18 ft • LED driver cases should be grounded

• LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned stranded copper lead-wires are required for installation

RoHS COMPLIANT L E A D - F R E E

Constant Voltage LED Driver

Model Number AC-60VD24H2.5DK Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

Dimming ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Minimum PF (full load)

Max. THD (full load)

Output Voltage

Output Current

T case Maximum

Minimum Starting Temp.

Efficiency Up To

Dimming Protocol

Dimming Range

IP Rating

60W

0.6A @ 120V 0.26A @ 277V

>0.95

<10%

24V ±5%

0.25 to 2.5A

90° C

-40° C

86.6%

0 to 10V

10 to 100%

IP66

WIRING:

PHYSICAL:

Lead Lengths Black 5.9" Purple 5.9" White 5.9" Gray 5.9" Green

5.9"

Dimensions Diameter Height Mounting Hole Distance Mounting Hole Diameter

6.36" 1.32" 5.04" 0.141"

Weight Case Qty.

1.32" 30 pcs.

SAFETY: • UL and cUL Recognized, Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection • No Exterior Case

• Open/Short Circuit Protection • LED driver has a life expectancy of 75,000 hours at Tcase of ≤70°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 3 yrs based on max case temp of <70°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 38 ft • LED driver cases should be grounded

*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 3 years when operated at max case temp of up to <70°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-60VD24AER

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

Dimming ELECTRICAL SPECIFICATIONS: Output Power

Input Current

60W

0.6A @ 120V 0.26A @ 277V

Min PF Max THD Output Output T case (full load) (full load) Voltage Current Max >0.95

<10%

24V ±5%

WIRING:

0.25 to 2.5A

90° C

Minimum Starting Temp

Efficiency Up To

IP Rating

Dimming Range

Dimming Protocol

-40° C

86.6%

IP66

10-100%

0-10V

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Purple Gray

5.9" 5.9"

Length Width Height Mounting Length Weight Case Qty.

12.8" 1.34" 1.14" 12.5" xx lbs. xx pcs.

SAFETY: • UL and cUL Recognized • UL1310 Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E

Constant Voltage LED Driver

Model Number AC-60VD12B5.0LU Input Voltage: 347V Input Frequency: 50/60Hz Side Mount/Leads

Dimming ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Input Power

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Min. Starting Temp

Efficiency Up To

Dimming Protocol

Dimming Range

60W

0.2A @ 347V

71W

>0.9

<20%

12V ±5%

0.5 to 5A

90° C

-40° C

88%

0 to 10V

10 to 100%

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Purple Gray

9.8" 9.8"

Length Width Height Mounting Length Weight Case Qty.

9.5" 1.7" 1.14" 8.9" xx lbs. xx pcs.

SAFETY: • UL and cUL Recognized • Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • IP 66 Harsh Weatherproof • Max Remote installation distance is 18 ft • LED driver cases should be grounded

• LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned stranded copper lead-wires are required for installation

RoHS COMPLIANT L E A D - F R E E

preliminary spec Constant Voltage LED Driver

Model Number AC60VD48A1.25NA Input Voltage: 120-277Vac Input Frequency: 50/60Hz Side Mount/Leads

Dimming ELECTRICAL SPECIFICATIONS: Output Power Range

Input Current

Input Power

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Min. Starting Temp

Efficiency Up To

Dimming Protocol

Dimming Range

6-60W

0.6@120V 0.26@277V

71W

>0.95

<10%

48V ±5%

0.125 to 1.25A

90° C

-40° C

88%

0 to 10V

10 to 100%

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

SAFETY: • UL and cUL Recognized • Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

5.9" 5.9"

Purple Gray

9.8" 9.8"

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

Length Width Height Mounting Length Weight Case Qty.

9.5" 1.7" 1.14" 8.9" xx lbs. xx pcs.

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of <90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • IP 66 Harsh Weatherproof • Max Remote installation distance is 18 ft • LED driver cases should be grounded

• LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned stranded copper lead-wires are required for installation

RoHS COMPLIANT L E A D - F R E E

Constant Voltage LED Driver

Model Number AC-60VD48B1.2LX Input Voltage: 347V Input Frequency: 50/60Hz Side Mount/Leads

Dimming ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Input Power

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Min. Starting Temp

Efficiency Up To

Dimming Protocol

Dimming Range

60W

0.2A @ 347V

71W

>0.9

<20%

48V ±5%

1.67 to 0.167A

90° C

-40° C

88%

0 to 10V

10 to 100%

WIRING:

PHYSICAL:

Dimensions

Lead Lengths Black White

5.9" 5.9"

Blue Red

5.9" 5.9"

Purple Gray

9.8" 9.8"

Length Width Height Mounting Length Weight Case Qty.

9.5" 1.7" 1.14" 8.9" xx lbs. xx pcs.

SAFETY: • UL and cUL Recognized, Class 2 • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • IP 66 Harsh Waterproof • Max Remote installation distance is 18 ft • LED driver cases should be grounded

• LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned stranded copper lead-wires are required for installation

E328847 Class 2

RoHS COMPLIANT L E A D - F R E E

eLEDs

Constant Voltage LED Driver

Model Number AC-60V24A2.5PF

POWER DESIGNS

Input Voltage: 120-277V Input Frequency: 50/60Hz Side Mount/Leads

A division of AC Electronics

ELECTRICAL SPECIFICATIONS: Output Power

Input Current

Min PF (full load)

Max THD (full load)

Output Voltage

Output Current

T case Max

Minimum Starting Temp

Efficiency Up To

IP Rating

60W

0.6A @ 120V 0.26A @ 277V

>0.95

<20%

24V ±5%

0.25 to 2.5A

90° C

-40° C

87%

IP66

PHYSICAL: WIRING: H

Dimensions

Wiring Lead Lengths White Black Red Blue

5.9" 5.9" 5.9" 5.9"

Length Width Height Mounting Length Mounting Hole Distance Mounting Hole Diameter Weight Case Qty.

9.5" 1.7" 1.14" 8.9" 1.0" .20" 1.32 lbs. 30 pcs.

SAFETY: • UL US Class 2 • cUL LVLE • UL Outdoor Type 1 • Class A sound rating • Overload Protection

• Open/Short Circuit Protection • LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C • LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C

• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C* • Input/Output Isolation • FCC Title 47 CFR Part 15 • Surge Protection (2 KV)

INSTALLATION: • LED drivers shall be installed inside electrical enclosures • 18 AWG 600V/105C tinned strand copper lead-wires are required for installation E332747 Class 2

• Max Remote installation distance is 18 ft • LED driver cases should be grounded

RoHS COMPLIANT L E A D - F R E E