How Do Roofing Contractors Handle A Leaky Roof?

How Do Roofing Contractors Handle A Leaky Roof?

If the roof on your house is in poor condition, you will notice leaks almost every time it rains. These leaks often seem to come out of nowhere, and you need to take care of these problems as fast as you can. Keep reading to learn what a Roofing Contractors In Dallas, Tx area will do to repair the roof and prevent leaks.

A Full Inspection The roof must be inspected thoroughly to ensure you have found to source of every leak. Ask your roofing contractor what they have found when they climb down from the roof, and request an estimate for the repairs that are needed. If your roof is beyond repair, this is the best time to talk about a roof replacement. If you chose to climb on the roof by yourself before calling the licensed roofer, tell the roofer what you found before their inspection begins.

Check The Shingles A roofing contractor will start by checking your shingles. If the shingles have shifted or warped,

they can be repaired with a special cement that is made for roofing jobs. However, shingles that are badly damaged by wind and rain should be replaced. When you have too many damaged shingles, the roof should be replaced. You will find that paying to replace broken shingles after every storm is far too expensive. Plus, it takes too much time to bring the Hail & Storm Damage Roofers back to your house every time there is a problem. Replacing the roof gives you new shingles, better construction, and better protection against storms.

How Does Water Get In The House?

Water will flow between gaps in your shingles, and every curled or warped shingle will allow water to damage the wood structure. Water that is not soaked up by the wood will leak into your attic, and any excess water will eventually reach your living space. For this reason, you might ask your roofing contractor to climb in the attic to check for leaks and/or damage.

What If Water Will Not Drain?

Water on your roof will not drain when you have shingles curling or shifting out of place. You might see water pool in certain parts of the roof where a leak has begun, and that pool of water will disappear after all the water has leaked into the house. When your roof is replaced, the new shingles are installed flush with the roof to ensure that the roof drains to the gutters. If your gutters are in poor condition, water will damage the edge of the roof and cause leaks.

How Is Flashing Used?

Flashing is used as part of roof repair and replacement to seal up all corners of the roof where shingles do not provide enough protection. If flashing is damaged, you could see leaks in the attic that have nothing to do with shingle damage. Again, you might ask your roofer to go in the attic to check for leaks caused by flashing damage. Flashing is used around chimneys and angles on the roof where shingles will not fit. You might see that a leak is coming from one of these spots on the roof, and you could tell your roofer about these leaks when they arrive. Identifying every failed part of the roof helps determine if you need a repair or replacement.

Roof repair and replacement should begin with an inspection. Ask your roofer to go inside the roof and attic to determine where all the leaks came from. When the inspection is complete, your roofing contractor can tell you how to repair the leaks or plan for a roof replacement.