CertsOut Juniper-JN0-682 Free Demo Dumps

Juniper JN0-682

Data Center Professional (JNCIP-DC) Version: Demo [ Total Questions: 10] Web: www.certsout.com Email: support@certsout.com

IMPORTANT NOTICE Feedback We have developed quality product and state-of-art service to ensure our customers interest. If you have any suggestions, please feel free to contact us at feedback@certsout.com

Support If you have any questions about our product, please provide the following items: exam code screenshot of the question login id/email please contact us at support@certsout.com and our technical experts will provide support within 24 hours.

Copyright The product of each order has its own encryption code, so you should use it independently. Any unauthorized changes will inflict legal punishment. We reserve the right of final explanation for this statement.

Certs Exam

Juniper - JN0-682

Question #:1 Referring to the exhibit, what would cause the problem on VCP 0/50?

A. The port is missing the interface hardware B. The remote side is not configured as a VCP C. The VCP has been disabled through configuration D. VCP 0/50 is configured as a network port.

Answer: B

Explanation the status of this port can be "disabled" when it has been disabled through configuration or "down" when the link is physically down or with the other end in network mode.

Question #:2 You host a multitenant data center that runs VMware. You must perform deep packet inspection on all inter-tenant traffic that is flowing between the VMs within the same hypervisor. Your solution must provide the security services without needing to leave the physical device.

In this scenario, what should you do to solve this problem?

A. Use separate vswitches to isolate each-tenant’s network and use and use a vSRX device to evaluate inter-tenant traffic.

B. Use VLANs to isolate each tenant’s networks and use an SRX Series device to evaluate inter-tenant traffic.

Pass with Valid Exam Questions Pool

1 of 5

Certs Exam

Juniper - JN0-682

C. Use a VLANs to isolate each tenant’s network and use IP tables to evaluates inter-tenant traffic.

D. Use a vMX device to isolate each tenant’s network and use firewall filters to evaluate inter-tenant traffic.

Answer: A Question #:3 Which statement is true about a Data center interconnect over an IP network?

A. Layer 2 data must traverse a point-to-point B. Layer 2 data must traverse an MPLS LSP. C. Layer 2 data must be encapsulated.

D. Layer 3 data must be encapsulated Answer: C

Explanation You don't have to use MPLS, it's just one of the methods to encapsulate the Ethernet frame. You can also use VXLAN or GRE between DC's Question #:4 Which protocol is used between VCF member devices to create a loop-free topology?

A. LLDP B. MDTP C. RSTP D. VCCP Answer: D Question #:5 When using EBGP as the underlay protocol for your IP fabric architecture, which two statements are true?

(Choose two.)

A. Spine nodes peer to both leaf and spine nodes B. Leaf nodes only peer to spine nodes

Pass with Valid Exam Questions Pool

2 of 5

Certs Exam

Juniper - JN0-682

C. Leaf nodes peer to both spine and leaf nodes D. Spine nodes only peer to leaf nodes Answer: B D Question #:6 You have configured a new MC-LAG connection to a host. After committing the configuration, the MC-LAG link is not functioning properly.

Referring to the exhibit, how would you solve this problem?

A. Configure a system-id on qfx1 that is different from the system-id on qfx2 B. Change the mc-ae is on qfx1 to 1 C. Configure status-control on qfx2 to active D. Change the chassis on qfx1 to 1 Answer: B

Pass with Valid Exam Questions Pool

3 of 5

Certs Exam

Juniper - JN0-682

Question #:7 A VXLAN has been created between devices leaf1 and leaf3.

Referring to the exhibit, which statement is true?

A. Traffic sent from host1 to host2 will be tagged with VLAN ID 200 when existing leaf3 B. Traffic sent from host1 to host2 will be tagged with VLAN ID 100 when existing leaf3 C. Traffic sent from host1 to host2 will be dropped on leaf3 D. Traffic sent from host1 to host2 will be dropped on leaf1.

Answer: A

Question #:8 Which two statements describe EVPN based VXLAN implementations? (Choose two.)

A. MAC addresses ate propagated using BGP updates B. MAC addresses are learned using multicast flooding C. The movement of a virtual host results in the dynamic remapping of the VTEP D. The movement of a virtual host requires a manual reconfiguration of the VTEP

Pass with Valid Exam Questions Pool

4 of 5

Certs Exam

Juniper - JN0-682

Answer: A C Question #:9 Which two statements define the use of route targets and route distinguishers in an EVPN? (Choose two.)

A. Route distinguishers ensure that routes from different client remain unique within the data center domain B. Route targets ensure that routes from different clients remain unique within the data center domain C. Route distinguishers identify the VRF into which the route should be placed D. Route targets identify the VRF into which the route should be placed Answer: A D Question #:10 What are two methods used to scale an IBGP IP Fabric? (Choose two.)

A. Spanning tree B. Redundant trunk groups C. Route reflection D. Confederations Answer: C D

Explanation

https://www.juniper.net/documentation/en_US/junos/topics/topic-map/bgp-confederations-for-scaling.html#id-understa

Pass with Valid Exam Questions Pool

5 of 5

About certsout.com certsout.com was founded in 2007. We provide latest & high quality IT / Business Certification Training Exam Questions, Study Guides, Practice Tests.

We help you pass any IT / Business Certification Exams with 100% Pass Guaranteed or Full Refund. Especially Cisco, CompTIA, Citrix, EMC, HP, Oracle, VMware, Juniper, Check Point, LPI, Nortel, EXIN and so on.

View list of all certification exams: All vendors

We prepare state-of-the art practice tests for certification exams. You can reach us at any of the email addresses listed below.

Sales: sales@certsout.com Feedback: feedback@certsout.com Support: support@certsout.com Any problems about IT certification or our products, You can write us back and we will get back to you within 24 hours.