Most HP DeskJet printers are quite reliable, but occasionally one may experience di culty connecting to a local Wi-Fi network. Here, we will see how to troubleshoot one common problem faced by most HP DeskJet 3700 printer users: “printer not connecting to Wi-Fi”. Do you face the same issue with your printer? If so, you’re not alone. Many HP DeskJet 3700 users have reported di culty connecting the printer to their home or o ce wireless networks. Fortunately, this issue is usually not di cult to fix. We’ll walk you through the steps for troubleshooting HP DeskJet 3700 Not Connecting To Wi-Fi, so you can get back to printing in no time. Ready to start? Let’s go!
HP DeskJet 3700 Not Connecting Issue
Are you new to HP printers or printer troubleshooting? If yes, don’t worry. We’ve got you covered! In order to help you out with printer not connecting to wi-fi issue, here are some simple workarounds that will hopefully get you connected in no time. Give each one a try, and you’ll be good to go if one works! If not, don’t give up just yet; keep trying until you find the best solution.
Best And Recommended Solutions
Ensure that:
● You have placed the HP DeskJet printer closer to the wireless router.
● You have not connected the printer to your computer or router using the USB or Ethernet cable.
● You’re using the recommended network type.
● No firewalls or software are blocking the printer from connecting.
If the basic solutions didn’t do the trick, let’s give the advanced solutions a go and get your Wi-Fi connected again!
#1 Check The Printer’s Network Settings
● If your HP DeskJet 3700 printer isn’t connecting to Wi-Fi, start by checking its network settings.
● You’ll need to print the printer’s network configuration page to check the settings.
● To do so, follow the instructions below.
● Press and hold the printer’s Information and Wireless buttons at the same time.
● When you hear a print sound from your printer, release the buttons.
● You can now verify the printer’s network configuration page to know its network status and current network settings.
#2 Check The Wireless Network Settings
● The next step is to check the wireless network settings because sometimes misconfigured network settings can lead to connectivity issues.
● You’ll need to access the router’s configuration menu to check and correct the network settings.
● You can do this within a few seconds by following the instructions.
● Connect your computer to the router over a wired connection.
● Open your web browser and type in the router’s IP address.
● Log into the router’s configuration menu.
● Navigate to the “Wireless” section.
● Ensure that the “Wireless Network” is enabled and that all settings are correct.
● If any settings are incorrect or missing, enter or select the correct ones.
● Once you’ve made the necessary changes, press the “Save” button to save the settings.
● That’s all it takes to check the wireless network settings!
#3 Check The Printer’s Firmware
● The third step is to check the printer’s firmware.
● Sometimes, outdated firmware can prevent the printer from connecting to the wireless network, so it’s important to make sure your printer’s firmware is up-to-date.
● To update the firmware, follow these steps:
● Download the latest firmware for your HP DeskJet 3700 printer from the printer’s o cial support site.
● Link the printer to your computer using the USB cable.
● Open the downloaded firmware file and follow the on-screen instructions to install it.
● Once the firmware has been installed, unplug the USB cable. Remember to restart the printer.
Now, try to connect your HP DeskJet 3700 printer to Wi-Fi. Is your printer connected to Wi-Fi? Great!
The Bottom Line
Troubleshooting HP DeskJet 3700 which is not connecting to Wi-Fi can be a challenging task. However, with a little patience and the right knowledge, it is possible to get your printer connected to the network. Start by making sure that the printer is properly connected to the network and that the network settings are correct. Then, update the firmware on the printer, if needed. If all else fails, try performing a hard reset on the printer. Following these steps should help you get your printer connected to the Wi-Fi network.