PRODUCTS 2016
www.fmtag.com
CONTENT Abbreviations Pumps
A
8
B
Vane pumps
10
Vane pumps for barrel screw mounting
26
Axial rotation pumps for barrel screw mounting
34
Peripheral pumps
36
Grease pumps
42
Electric diaphragm pumps AdBlue速
50
Fuelling stations
54
TANKFIxx
56
DIESELFIxx
64
DIESELMAxx
66
DIESELFIxx with Diesel management system
68
DIESELMAxx with Diesel management system
70
Supports for DIESELFIxx / DIESELMAxx
72
Vane pump sets
74
For barrel screw mounting
78
Mounted on base plate
96
Mobile sets
110
Filter systems for Diesel
114
Axial rotation pump sets
118
PREMAxx 38 l/min, 10 gpm-12 V DC
120
PREMAxx 43 l/min, 11,4 gpm-24 V DC
122
PREMAxx 52 l/min, 13,7 gpm-230 V
124
PREMAxx for AdBlue速
130
Urea pump sets AdBlue速
4
6
132
Urea pump sets for barell mounting, mounted on base plate
138
Urea pump sets for barell mounting
140
Urea pump sets for mounting on IBC containers
142
Urea pump sets with filter for mounting on IBC containers
144
Urea systems
146
Urea accessories AdBlue速
148
C
D
E
F
G
H
I
J K
L
Management systems
158
Diesel managemengt system (DMS)
158
Oil management system (OMS)
166
Accessories for Management systems
178
Volume meters
182
Oval gear meters, digital
184
Oval gear meters, mechanical
200
Impeller meters, digital
202
Turbine-wheel meters
204
Nozzle valves an swivel joints
206
Nozzle valves for diesel
208
Nozzle valves for diesel with type approval
212
Nozzle valves for oil
214
Swivel joints
220
Nozzle valve holders
221
Hoses
222
Hoses for diesel, by the metre
224
Hoses for diesel with fittings, fixed lengths
226
Accessories
232
Filters
234
Adapters for filters
236
Suction tubes
238
Suction tubes with connection hose
240
Foot valves and suction filters
242
Swivel joints
243
Barrel screw mountings
244
Nozzle valve holder
245
Press type fittings for diesel hoses
246
Adapters
252
Special connectors
254
Accessories for volume meters
258
Content
264
sorted by item numbers
5
ABBREVIATIONS
6
Abbreviation
Description
Abbreviation
Description
°C
Degree Celsius
EMP
Electrical diaphragm pump
°F
Degree Fahrenheit
EN
European Standard
1 SN
High pressure hose, DIN 20 022 (EN 853) Part 3 comp. to SAE 100 R1T with one braid enforcement
EPDM
Ethylene-Propylene-Dien-Rub-ber
EST
Interference suppression EU-plug
1~AC
1-phase alternate current
EUS EZP
Electric gear pump
2 SN
High pressure hose, DIN 20 022 (EN 853) Part 4 comp. to SAE 100 R2T with two braid enforcement
F
Filter
FCKW
Fluorcarbon
3~AC
3-phase alternate current
FEP
a
Male / outer
Tetrafluorethyle – Perfluorpro-pylen (Teflon® FEP)
A
Ampere
FKM
Viton®
ABH
Dispensing tap
FPM
Fluor-Polymer (Viton®)
ABK
Battery clips
ft
Feet
ABM
Dimensions
FUV
Foot valve
AC
Alternate current
FZP
Vane pump
AD
Outside diameter, in millimetres
G
Whitworth Pipe Thread, cylin-drical ISO 228 (DIN 259)
Alu
Aluminium
GG
Gray cast iron casting Gallons per minute
ASA
Automatic switch-off electronics
gpm GPM
Mounted on base plate Straight safety discharge
B
Size of the product
GRS
BD
Operating pressure
GS
Tested security
BM
Floor mounting
HD
High pressure
BSF
British Standard Fine/Whitworth thread, quality: fine
HDPE
High Density Polyethylene
CSM
Hypalon®
Hyrtel®
D
Mounting on ceilings
Hyrtel® is a registered trade-mark of the company Du Pont
Hz
Hertz
dB (A)
Dezibel, A-weighted noise level (referring to silent con-dition)
i
Female / inside
ILN
International location number
DC
Direct current
INOX
Stainless steel
DG
Swivel
IP
Protection type
DIN
German Institute for Industrial Standards
IPG
Pulse meter
DK
Sealing cone
ISO VG
International Organization for Standardization
DL
Air pressure
kg
Kilogram
DM
Designed for mounting on deck
kW
Kilowatt
DN
Inside diameter, in millimetres
LBH
Length x width x height, in millimetres
EAN-Code
European Item Numering System (barcode)
LDPE
Low Density Polyethylene
EBZM
In-line meter
LLDPE
Linear Low Density Polyethylene
E-CTFE
Ethylen – Chlortrifluortyhlen (Halar®)
LW
Width
ED
Operating time
M
Metric thread, cylindrical DIN 13
EF
Calibratable for public sales
Abbreviation
Description
Abbreviation
Description
m
Meter
m
male / outer
RST
Special treatment for a high quality of steel
Me
Brass
SAN
Styrol Acrylnitril
MDPE
Polyethylene MDPE
SI
Silicone rubber
M-Ein Aus
Manual on/off control by switch
SK
Rigid fast connection adapter
SOT
Slide-on type
mm
Millimeter
MoS2
Molybdenum Disulfide
SRL
Suction pipe length, in millimetres
mPas
Millipascalsecond
St
Steel
my
10 -6 meter
STV
Stick valve
NBR
Perbunan®
SW
Wrench width
ND
Nominal pressure
TRBF
NEF
Not calibratable
Technical Guideline for inflam-mable fluids
NEOP
Neoprene
V
Volt Stainless steel
NW
Nominal width = inside diame-ter, in millimeters
VA VA
Voltampere
O
Open, not encased
VSTB
Galvanized steel sheet
Ø
Diameter
VZ
Galvanized
oFUV
Without foot valve
W
Watt
PA
Polyamide
WHG
PC
Polycarbonate
Water/Enviromental Protecting Law (German)
PE
Polyethylene
WML
Designed for wall mounting left
PEI
Polyetherimide
WMR
PFA
Perfluoraloxy Copolymer (Teflon® PFA)
Designed for wall mounting right
ZDG
Zinc die-casting
PMP
Polymethylpentene (TPX®)
PN
Nominal pressure or operating pressure
ZVA
Automatic nozzle valve for Diesel
POM
Acetal Homopolymer
ZVAB
Automatic nozzle for diesel manufacturing license
PP
Polypropylene
ZVABD
PPGF
Polypropylene, fibreglass reinforced
Automatic nozzle valve for Diesel with German design approval and swivel
PPS
Polyphenylene sulfide
ZVAD
Automatic nozzle valve for Diesel with swivel
PS
Polystyrol
ZVAUD
PSF
Polysulfone
Urea automatic nozzle with rotary swivel
PTB
Physical Technical Institute of Germany
ZVD
Nozzle valve, manual, Al, with swivel joint
Polytetrafluorethylene (Teflon®)
ZVH
Control gun storage rack
PTFE
ZVMUD
PVC
Polyvinylchloride
Urea manual nozzle with rotary swivel
PVDF
Polyvinylidenefluoride
ZVS
Nozzle valve switch
Q
Heat transfer oil
R
Whitworth thread, tapered, similar to DIN 3858
RFI
Radio Frequency Interference
RK
Ball head
A
7
PUMPS
technic that leads
8
outperformed + outlast B
9
PUMPS Vane pumps
Technical data
Specification
Connection suction side:
G 1‘‘ female
• Vane pump, with integral bypass
Connection discharge side:
G 1‘‘ female
• On/Off switch • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
vane pump, selfpriming
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Pumping media:
fuel oil and diesel
• Installation Flowmeter NUMERIxx³, three digit, possible (23 192) Features & Benefits • First class construction of electric machines and pumps
Motor data Insulation class:
F
Thermal protection:
self resetting
Duty cycle (min):
continuous operation
Type of construction:
IMB 3
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
• Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Motor and switch case made of shock resistant, die-cast aluminium • Continuous operation – a real endurance runner • Suction hight 5m / 16,4 ft • Small tolerances provide a high suction- and pressure performance • Pump case freely positionable in all 90° positions Packaging Packing unit:
10
1,0
Industrial design 60 l/min
Item number Technical data
Diesel pump 60 l/min
Connecting cable, length (m):
2
Delivery rate under free discharge (l/min):
15,8
Suction height (m):
17
Highest permissible limit temperature (째C):
311
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
3
Power (kW):
0,6
Torque (Nm):
1,27
Rotation speed (rpm):
2800
Dimensions LxWxH (mm):
11 x 4,5 x 6,7
Weight (kg):
14,1
23 430
230 V-1~AC-50 Hz-EUS
B
Packaging Dimensions LxWxH (mm):
338 x 200 x 196
Weight including package (kg):
7
11
PUMPS Vane pumps
Technical data
Specification
Connection suction side:
G 1‘‘ female
• Vane pump, with integral bypass
Connection discharge side:
G 1‘‘ female
• On/Off switch • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
vane pump, selfpriming
Discharge pressure up to (bar) / (psi):
2,2 / 31,9
Pumping media:
fuel oil and diesel
• Installation Flowmeter NUMERIxx³, three digit, possible (23 192) Features & Benefits • First class construction of electric machines and pumps
Motor data Insulation class:
F
Thermal protection:
self resetting
Duty cycle (min):
continuous operation
Torque (Nm):
4,1
Rotation speed (rpm):
1400
Type of construction:
IMB 3
• Motor and switch case made of shock resistant, die-cast aluminium
Protection class:
IP 54
• Continuous operation – a real endurance runner
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
• Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
• Suction hight 5m / 16,4 ft • Small tolerances provide a high suction- and pressure performance • Pump case freely positionable in all 90° positions Packaging Packing unit:
12
1,0
Industrial design 100 l/min
Item number Technical data
Diesel pump 100 l/min
Connecting cable, length (m):
2
Delivery rate under free discharge (l/min):
100
Suction height (m):
5
Highest permissible limit temperature (째C):
155
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
5,7
Power (kW):
1,2
Dimensions LxWxH (mm):
320 x 135 x 190
Weight (kg):
10,08
23 433
230 V-1~AC-50 Hz-EUS
B
Packaging Dimensions LxWxH (mm):
338 x 200 x 196
Weight including package (kg):
10,68
13
PUMPS Vane pumps
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
• Vane pump, with integral bypass 3 / 10
Connection suction side:
G 1‘‘ female
• Fuse
Connection discharge side:
G 1‘‘ female
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
vane pump, selfpriming
Features & Benefits
• On/Off switch
Hydraulic data Pump design: Delivery rate under free discharge up to (l/min) / (gpm):
35 / 9,2
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,6 / 23,2
Pumping media:
fuel oil and diesel
• First class construction of electric machines and pumps
Motor data
• Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
25 A plug-in fuse
Duty cycle (min) under free discharge max.:
• Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis
180
• Motor case, completely galvanised, coated external parts
Duty cycle (min) under free discharge max.:
2
• Small tolerances provide a high suction- and pressure performance
Rotation speed (rpm):
3000
Type of construction:
IMB 5
Protection class:
IP 54
• Switch case made of shock resistant, die-cast zinc, coated by cataphoresis
• The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F Packaging
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
Dimensions LxWxH (mm) / (inch):
270 x 120 x 120 / 10,6 x 4,7 x 4,7
Weight (kg) / (lb):
5 / 11
14
Dimensions LxWxH (mm) / (inch):
300 x 170 x 160 / 11,8 x 6,7 x 6,3
Weight including package (kg) / (lb):
5,2 / 11,5
Packing unit:
1,0
MOBIFIxx Industrial design 35 l/min / 9,2 gpm, 12 + 24 V DC
Item number Technical data
MOBIFIxx 35 l/min9,2 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
19
Power (W):
230
Torque (Nm):
0,38
Technical data 24 V DC
Power consumption (A):
11
Power (W):
270
Torque (Nm):
0,45
B
battery terminal clips
MOBIFIxx 35 l/min9,2 gpm-24 V-DC
Voltage (V):
23 404
23 405
battery terminal clips
15
PUMPS Vane pumps
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
• Vane pump, with integral bypass 3 / 10
Connection suction side:
G 1‘‘ female
• Fuse
Connection discharge side:
G 1‘‘ female
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
vane pump, selfpriming
Features & Benefits
• On/Off switch
Hydraulic data Pump design: Delivery rate under free discharge up to (l/min) / (gpm):
35 / 9,2
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,6 / 23,2
Pumping media:
fuel oil and diesel
• First class construction of electric machines and pumps
Motor data
• Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
25 A plug-in fuse
Duty cycle (min) under free discharge max.:
• Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis
180
• Motor case, completely galvanised, coated external parts
Duty cycle (min) under free discharge max.:
2
• Small tolerances provide a high suction- and pressure performance
Rotation speed (rpm):
3000
Type of construction:
IMB 5
Protection class:
IP 54
• Switch case made of shock resistant, die-cast zinc, coated by cataphoresis
• The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F Packaging
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
Dimensions LxWxH (mm) / (inch):
270 x 120 x 120 / 10,6 x 4,7 x 4,7
Weight (kg) / (lb):
5 / 11
16
Dimensions LxWxH (mm) / (inch):
300 x 170 x 160 / 11,8 x 6,7 x 6,3
Weight including package (kg) / (lb):
5,2 / 11,5
Packing unit:
1,0
MOBIFIxx Industrial design 35 l/min / 9,2 gpm, 12 + 24 V DC
Item number Technical data
MOBIFIxx 35 l/min9,2 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
19
Power (W):
230
Torque (Nm):
0,38
Automatic start-up:
Delayed motor operation after start
Automatic shut-off 1:
the motor is automatically shut off when the vale is closed
Automatic shut-off 2:
automatic motor shut-off in case of dry running
23 404 002
battery terminal clips + ASA + EST
B
Specification • Electronic shut-off with relay circuit • Motor with RFI suppression Features & Benefits • Delayed start after switching on the pump • Automatically shut off when the vale is closed • LED fault display • Overvoltage and undervoltage protection
17
PUMPS Vane pumps
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
• Vane pump, with integral bypass 3 / 10
Connection suction side:
G 1‘‘ female
• Fuse
Connection discharge side:
G 1‘‘ female
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
vane pump, selfpriming
Features & Benefits
• On/Off switch
Hydraulic data Pump design: Delivery rate under free discharge up to (l/min) / (gpm):
35 / 9,2
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,6 / 23,2
Pumping media:
fuel oil and diesel
• First class construction of electric machines and pumps
Motor data
• Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
25 A plug-in fuse
Duty cycle (min) under free discharge max.:
• Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis
180
• Motor case, completely galvanised, coated external parts
Duty cycle (min) under free discharge max.:
2
• Small tolerances provide a high suction- and pressure performance
Rotation speed (rpm):
3000
Type of construction:
IMB 5
Protection class:
IP 54
• Switch case made of shock resistant, die-cast zinc, coated by cataphoresis
• The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F Packaging
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
Dimensions LxWxH (mm) / (inch):
270 x 120 x 120 / 10,6 x 4,7 x 4,7
Weight (kg) / (lb):
5 / 11
18
Dimensions LxWxH (mm) / (inch):
300 x 170 x 160 / 11,8 x 6,7 x 6,3
Weight including package (kg) / (lb):
5,2 / 11,5
Packing unit:
1,0
MOBIFIxx Industrial design 35 l/min / 9,2 gpm, 12 + 24 V DC
Item number Technical data
MOBIFIxx 35 l/min9,2 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
11
Power (W):
270
Torque (Nm):
0,45
Automatic start-up:
Delayed motor operation after start
Automatic shut-off 1:
the motor is automatically shut off when the vale is closed
Automatic shut-off 2:
automatic motor shut-off in case of dry running
23 405 002
battery terminal clips + ASA + EST
B
Specification • Electronic shut-off with relay circuit • Motor with RFI suppression Features & Benefits • Delayed start after switching on the pump • Automatically shut off when the vale is closed • LED fault display • Overvoltage and undervoltage protection
19
PUMPS Vane pumps
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
• Vane pump, with integral bypass 3 / 10
Connection suction side:
G 1‘‘ female
• Fuse
Connection discharge side:
G 1‘‘ female
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
vane pump, selfpriming
Features & Benefits
• On/Off switch
Hydraulic data Pump design: Delivery rate under free discharge up to (l/min) / (gpm):
54 / 14,3
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Pumping media:
fuel oil and diesel
• First class construction of electric machines and pumps
Motor data
• Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
40 A plug-in fuse
Duty cycle (min) under free discharge max.:
• Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis
180
• Motor case, completely galvanised, coated external parts
Duty cycle (min) under free discharge max.:
2
• Small tolerances provide a high suction- and pressure performance
Rotation speed (rpm):
2500
Type of construction:
IMB 5
Protection class:
IP 54
• Switch case made of shock resistant, die-cast zinc, coated by cataphoresis
• The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F Packaging
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
Dimensions LxWxH (mm) / (inch):
280 x 120 x 120 / 11 x 4,7 x 4,7
Weight (kg) / (lb):
6,42 / 14,2
20
Dimensions LxWxH (mm) / (inch):
338 x 200 x 196 / 13,3 x 7,9 x 7,7
Weight including package (kg) / (lb):
7,02 / 15,5
Packing unit:
1,0
MOBIMAxx Industrial design 54 l/min / 14,3 gpm, 12 + 24 V DC
Item number Technical data
MOBIMAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
Technical data 12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
B
battery terminal clips
MOBIMAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
23 407
23 406
battery terminal clips + EST
Specification • Motor with RFI suppression
21
PUMPS Vane pumps
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
• Vane pump, with integral bypass 3 / 10
Connection suction side:
G 1‘‘ female
• Fuse
Connection discharge side:
G 1‘‘ female
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
vane pump, selfpriming
Features & Benefits
• On/Off switch
Hydraulic data Pump design: Delivery rate under free discharge up to (l/min) / (gpm):
54 / 14,3
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Pumping media:
fuel oil and diesel
• First class construction of electric machines and pumps
Motor data
• Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
40 A plug-in fuse
Duty cycle (min) under free discharge max.:
• Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis
180
• Motor case, completely galvanised, coated external parts
Duty cycle (min) under free discharge max.:
2
• Small tolerances provide a high suction- and pressure performance
Rotation speed (rpm):
2500
Type of construction:
IMB 5
Protection class:
IP 54
• Switch case made of shock resistant, die-cast zinc, coated by cataphoresis
• The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F Packaging
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
Dimensions LxWxH (mm) / (inch):
280 x 120 x 120 / 11 x 4,7 x 4,7
Weight (kg) / (lb):
6,42 / 14,2
22
Dimensions LxWxH (mm) / (inch):
338 x 200 x 196 / 13,3 x 7,9 x 7,7
Weight including package (kg) / (lb):
7,02 / 15,5
Packing unit:
1,0
MOBIMAxx Industrial design 54 l/min / 14,3 gpm, 12 + 24 V DC
Item number Technical data
MOBIMAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
Automatic start-up:
Delayed motor operation after start
Automatic shut-off 1:
the motor is automatically shut off when the vale is closed
Automatic shut-off 2:
automatic motor shut-off in case of dry running
23 406 002
battery terminal clips + ASA + EST
B
Specification • Electronic shut-off with relay circuit • Motor with RFI suppression Features & Benefits • Delayed start after switching on the pump • Automatically shut off when the vale is closed • LED fault display • Overvoltage and undervoltage protection
23
PUMPS Vane pumps
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
• Vane pump, with integral bypass 3 / 10
Connection suction side:
G 1‘‘ female
• Fuse
Connection discharge side:
G 1‘‘ female
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
vane pump, selfpriming
Features & Benefits
• On/Off switch
Hydraulic data Pump design: Delivery rate under free discharge up to (l/min) / (gpm):
54 / 14,3
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Pumping media:
fuel oil and diesel
• First class construction of electric machines and pumps
Motor data
• Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
40 A plug-in fuse
Duty cycle (min) under free discharge max.:
• Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis
180
• Motor case, completely galvanised, coated external parts
Duty cycle (min) under free discharge max.:
2
• Small tolerances provide a high suction- and pressure performance
Rotation speed (rpm):
2500
Type of construction:
IMB 5
Protection class:
IP 54
• Switch case made of shock resistant, die-cast zinc, coated by cataphoresis
• The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F Packaging
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
Dimensions LxWxH (mm) / (inch):
280 x 120 x 120 / 11 x 4,7 x 4,7
Weight (kg) / (lb):
6,42 / 14,2
24
Dimensions LxWxH (mm) / (inch):
338 x 200 x 196 / 13,3 x 7,9 x 7,7
Weight including package (kg) / (lb):
7,02 / 15,5
Packing unit:
1,0
MOBIMAxx Industrial design 54 l/min / 14,3 gpm, 12 + 24 V DC
Item number Technical data
MOBIMAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
Automatic start-up:
Delayed motor operation after start
Automatic shut-off 1:
the motor is automatically shut off when the vale is closed
Automatic shut-off 2:
automatic motor shut-off in case of dry running
23 407 002
battery terminal clips + ASA + EST
B
Specification • Electronic shut-off with relay circuit • Motor with RFI suppression Features & Benefits • Delayed start after switching on the pump • Automatically shut off when the vale is closed • LED fault display • Overvoltage and undervoltage protection
25
PUMPS Vane pumps for barrel screw mounting
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
• Vane pump, with integral bypass 2/7
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Installation Flowmeter NUMERIxx³, three digit, possible (23 192) • Filter strainer prevents dirt from being sucked up into the pump
Pump design:
vane pump, selfpriming
Delivery rate under free discharge up to (l/min) / (gpm):
60 / 15,8
Features & Benefits
Suction height up to (m) / (ft):
5 / 16,4
• For 200 up to 1000 l container
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Pumping media:
fuel oil and diesel
• Barrel screw coupling, G 2‘‘ male, G 1“ male (19 514)
• First class construction of electric machines and pumps
Motor data
• Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Thermal protection:
self resetting
• Continuous operation – a real endurance runner
Duty cycle (min):
Continuous operation
• Suction hight 5m / 16,4 ft
Torque (Nm):
1,27
Type of construction:
IMB 3
Protection class:
IP 54
• Motor and switch case made of shock resistant, die-cast aluminium
• Small tolerances provide a high suction- and pressure performance Packaging
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
Dimensions LxWxH (mm) / (inch):
280 x 115 x 170 / 11 x 4,5 x 6,7
Weight (kg) / (lb):
6,4 / 14,1
26
Dimensions LxWxH (mm) / (inch):
338 x 200 x 196 / 13,3 x 7,9 x 7,7
Weight including package (kg) / (lb):
6,4 / 14,1
Packing unit:
1,0
ROTAxx Industrial design 60 l/min / 15,8 gpm
Item number Technical data
ROTAxx 60 l/min230 V-1~AC
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
3
Power (kW):
0,6
Rotation speed (rpm):
2800
23 905
B
50 Hz-EUS-M Ein Aus
Specification • On/Off switch
27
PUMPS Vane pumps for barrel screw mounting
Technical data
Specification • Vane pump, with integral bypass
Connecting cable with battery terminal clips, length (m) / (ft):
2/7
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge up to (l/min) / (gpm):
60 / 15,8
Suction height up to (m) / (ft):
5 / 16,4
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Pumping media:
fuel oil and diesel
Motor data
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Installation Flowmeter NUMERIxx³, three digit, possible (23 192) • Filter strainer prevents dirt from being sucked up into the pump • Barrel screw coupling, G 2‘‘ male, G 1“ male (19 514) Features & Benefits • For 200 up to 1000 l container • First class construction of electric machines and pumps • Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Thermal protection:
self resetting
• Continuous operation – a real endurance runner
Duty cycle (min):
Continuous operation
• Suction hight 5m / 16,4 ft
Torque (Nm):
1,27
Type of construction:
IMB 3
Protection class:
IP 54
• Motor and switch case made of shock resistant, die-cast aluminium
• Small tolerances provide a high suction- and pressure performance Packaging
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
1.4301
Vane:
POM
Dimensions LxWxH (mm) / (inch):
280 x 115 x 170 / 11 x 4,5 x 6,7
Weight (kg) / (lb):
6,4 / 14,1
28
Packing unit:
1,0
ROTAxx Industrial design 60 l/min / 15,8 gpm
Item number Technical data
ROTAxx 15,8 gpm120 V-1~AC
Voltage (V):
120
Frequency (Hz):
60
Power consumption (A):
6,5
Power (kW):
0,8
Rotation speed (rpm):
3250
23 906 006
B
60 Hz-USA-ZVS
Specification • On/Off switch through control valve Packaging • Dimensions LxWxH (mm) / (inch):
338 x 200 x 196 / 13,3 x 7,9 x 7,7
• Weight (kg) / (lb):
6,4 / 14,1
29
PUMPS Vane pumps for barrel screw mounting
Technical data
Specification • Vane pump, with integral bypass
Connecting cable with battery terminal clips, length (m) / (ft):
3 / 10
• On/Off switch
Connection suction side:
G 1‘‘ female
• Fuse
Connection discharge side:
G 1‘‘ female
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design: Delivery rate under free discharge up to (l/min) / (gpm):
vane pump, selfpriming
54 / 14,3
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Pumping media:
fuel oil and diesel
Motor data
• Installation Flowmeter NUMERIxx³, three digit, possible (23 192) • Filter strainer prevents dirt from being sucked up into the pump • Barrel screw coupling, G 2‘‘ male, G 1“ male (19 514) Features & Benefits • For 200 up to 1000 l container • First class construction of electric machines and pumps • Continuous operation - 3 hours - with open valve
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
40 A plug-in fuse
Duty cycle (min) under free discharge max.:
180
Duty cycle (min) under free discharge max.:
2
Rotation speed (rpm):
2500
Type of construction:
IMB 5
Protection class:
IP 54
• Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions • Switch case made of shock resistant, die-cast zinc, coated by cataphoresis • Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis
Materials of parts in contact with liquid
• Motor case, completely galvanised, coated external parts
Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
• Small tolerances provide a high suction- and pressure performance
Rotor:
GG 25
Vane:
POM
• The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F Packaging Packing unit:
30
1,0
ROTAxx Industrial design 54 l/min / 14,3 gpm, 12 + 24 V DC
Item number Technical data
ROTAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
Dimensions LxWxH (mm) / (inch):
280 x 120 x 120 / 11 x 4,7 x 4,7
Weight (kg) / (lb):
6,42 / 14,2
23 901
B
battery terminal clipsM-Ein Aus
Packaging • Dimensions LxWxH (mm) / (inch):
338 x 200 x 196 / 13,3 x 7,9 x 7,7
• Weight (kg) / (lb):
7,02 / 15,5
Technical data
ROTAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
Dimensions LxWxH (mm) / (inch):
280 x 120 x 120 / 11 x 4,7 x 4,7
Weight (kg) / (lb):
6,3 / 13,9
23 902
battery terminal clipsM-Ein Aus
Packaging • Dimensions LxWxH (mm) / (inch):
338 x 200 x 196 / 13,3 x 7,9 x 7,7
• Weight (kg) / (lb):
7 / 15,4
31
PUMPS Vane pumps for barrel screw mounting
Technical data
Specification • Vane pump, with integral bypass
Connecting cable with battery terminal clips, length (m) / (ft):
3 / 10
• On/Off switch
Connection suction side:
G 1‘‘ female
• Fuse
Connection discharge side:
G 1‘‘ female
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design: Delivery rate under free discharge up to (l/min) / (gpm):
vane pump, selfpriming
54 / 14,3
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Pumping media:
fuel oil and diesel
Motor data
• Installation Flowmeter NUMERIxx³, three digit, possible (23 192) • Filter strainer prevents dirt from being sucked up into the pump • Barrel screw coupling, G 2‘‘ male, G 1“ male (19 514) Features & Benefits • For 200 up to 1000 l container • First class construction of electric machines and pumps • Continuous operation - 3 hours - with open valve
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
40 A plug-in fuse
Duty cycle (min) under free discharge max.:
180
Duty cycle (min) under free discharge max.:
2
Rotation speed (rpm):
2500
Type of construction:
IMB 5
Protection class:
IP 54
• Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions • Switch case made of shock resistant, die-cast zinc, coated by cataphoresis • Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis
Materials of parts in contact with liquid
• Motor case, completely galvanised, coated external parts
Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
• Small tolerances provide a high suction- and pressure performance
Rotor:
GG 25
Vane:
POM
• The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F Packaging Packing unit:
32
1,0
ROTAxx Industrial design 54 l/min / 14,3 gpm, 12 + 24 V DC
Item number Technical data
ROTAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
Dimensions LxWxH (mm) / (inch):
280 x 120 x 120 / 11 x 4,7 x 4,7
Weight (kg) / (lb):
6,42 / 14,2
23 901 008
B
battery terminal clips-M-ZVH
Specification • Control nozzle storage bracket Packaging • Dimensions LxWxH (mm) / (inch):
338 x 200 x 196 / 13,3 x 7,9 x 7,7
• Weight (kg) / (lb):
7,02 / 15,5
Technical data
ROTAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
Dimensions LxWxH (mm) / (inch):
280 x 120 x 120 / 11 x 4,7 x 4,7
Weight (kg) / (lb):
6,3 / 13,9
23 902 008
battery terminal clips-ZVH
Specification • Control nozzle storage bracket Packaging • Dimensions LxWxH (mm) / (inch):
338 x 200 x 196 / 13,3 x 7,9 x 7,7
• Weight (kg) / (lb):
7 / 15,4
33
PUMPS Axial rotation pumps for barrel screw mounting
Technical data
Specification
Connection container:
G 2“ male, drum adapter
• For 200 up to 1000 l container
Connection suction side:
G 1‘‘ male
• Barrel screw coupling, G 2‘‘ male
Connection discharge side:
G 1‘‘ male
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data
• Motor with thermal protection switch, self resetting
Pump design:
axial gear
Suction height up to (m) / (ft):
2 / 6,6
• Valuable sales package
Discharge height max. (m) / (ft):
15 / 49,2
Features & Benefits
Pumping media:
fuel oil and diesel
Motor data
• Illuminated on/off switch
• The pump is lightweight and very quiet in operation. • Resistant against small dirt particles in the liquid to be discharged
Thermal protection:
self resetting
Duty cycle (min):
30
Rotation speed at 0,5 bar counterpressure (rpm):
7500
Type of construction:
IMB 5
Material of pump housing and pump:
PA6 / GF30
• Replace the carbons when the pump has delivered a volume of 100,000 l
Dimensions LxWxH (mm) / (inch):
90 x 120 x 300 / 3,5 x 4,7 x 11,8
Packaging
34
• The liquid level can be lifted to operation level by manual pumping • Can be manually operated in case of electric power blackout • Pump can only be utilized as barrel pump
Dimensions LxWxH (mm) / (inch):
400 x 400 x 220 / 15,7 x 15,7 x 8,7
Weight (kg) / (lb):
4,5 / 9,9
Packing unit:
1,0
PREMAxx
Item number Technical data
PREMAxx 52 l/min
Connecting cable, length (m) / (ft):
2 / 6,6
Delivery rate under free discharge (l/min) / (gpm):
52 /13,7
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
1,8
Power (kW):
0,32
Protection class:
IP 34
Weight (kg) / (lb):
2,5 / 5,5
23 730
230 V-1~AC-50 Hz-EUS
B
Specification • Euro two-pin plug, 2 m cable
Technical data
PREMAxx 38 l/min
Connecting cable, length (m) / (ft):
2 / 6,6
Delivery rate under free discharge (l/min) / (gpm):
38 / 10
Voltage (V):
12 V DC
Power consumption (A):
14
Power (kW):
0,18
Protection class:
IP 44
Weight (kg) / (lb):
2,5 / 5,5
23 710
12 V-DC-ABK
Specification • Battery terminal clips, 2 m cable
Technical data
PREMAxx 43 l/min
Connecting cable, length (m) / (ft):
2 / 6,6
Delivery rate under free discharge (l/min) / (gpm):
43 / 11,4
Voltage (V):
24 V DC
Power consumption (A):
10
Power (kW):
0,24
Protection class:
IP 44
Weight (kg) / (lb):
2,5 / 5,5
23 720
24 V-DC-ABK
Specification • Battery terminal clips, 2 m cable
35
PUMPS Peripheral pumps
Technical data
Specification
Connection suction side:
quick connecting coupler
• sea-water resistant
Connection discharge side:
quick connecting coupler
• integral back-flow valve • 2 hose inserts with quick connecting coupler
Hydraulic data Pump design:
axial gear, self-priming
Delivery rate under free discharge (l/min) / (gpm):
40 / 10,6
Suction height up to (m) / (ft):
4 / 13,1
Discharge pressure up to (bar) / (psi): Pumping media:
• Suction filter (23 180) Packaging
0,8 / 11,6
Dimensions LxWxH (mm) / (inch):
360 x 170 x 210 / 14,2 x 6,7 x 8,3
Fuel oil, diesel, water
Weight (kg) / (lb):
7,5 / 16,5
Packing unit:
1,0
Motor data Voltage (V):
12 V DC
Power consumption (A):
21
Power (kW):
0,3
Duty cycle (min):
15
Torque (Nm):
0,62
Rotation speed (rpm):
2750
Protection class:
IP 44
Materials of parts in contact with liquid Material pump housing:
brass
Axial gear:
brass
Dimensions LxWxH (mm) / (inch):
353 x 163 x 110 / 13,9 x 6,4 x 4,3
Weight (kg) / (lb):
6,7 / 14,8
36
• 3 hose clips DIN 3017, adjustable from 25-40 mm
FLUIDAxx
Item number FLUIDAxx 40 l/min
23 631
12 V-DC-SK-SK-BM
B
Specification • Designed for floor mounting (BM)
FLUIDAxx 40 l/min
23 632
12 V-DC-SK-SK-DM Specification • Designed for mounting on ceilings (DM)
FLUIDAxx 40 l/min
23 633
12 V-DC-SK-SK-WML Specification • Designed for left hand wall mounting (WML)
FLUIDAxx 40 l/min
23 634
12 V-DC-SK-SK-WMR Specification • Designed for right hand wall mounting (WMR)
37
PUMPS Peripheral pumps
Technical data
Specification
Connection suction side:
G 1‘‘ male
• sea-water resistant
Connection discharge side:
G 1‘‘ male
• integral back-flow valve • 3 hose inserts with sealing cone DN 25
Hydraulic data Pump design:
axial gear, self-priming
Delivery rate under free discharge (l/min) / (gpm):
40 / 10,6
• 3 hose clips DIN 3017, adjustable from 25-40 mm
Suction height up to (m) / (ft):
4 / 13,1
Discharge pressure up to (bar) / (psi):
0,8 / 11,6
Pumping media:
Fuel oil, diesel, water
Motor data Voltage (V):
12 V DC
Power consumption (A):
21
Power (kW):
0,3
Duty cycle (min):
15
Torque (Nm):
0,62
Rotation speed (rpm):
2750
Protection class:
IP 44
Materials of parts in contact with liquid Material pump housing:
brass
axial gear:
brass
Dimensions LxWxH (mm) / (inch):
300 x 170 x 210 / 11,8 x 6,7 x 8,3
Weight (kg) / (lb):
7,7 / 17
38
• 3 sleeve nuts G 1“ female, DN 25
• Suction filter (23 180) • For mounting use mounting set (23 690) Packaging Dimensions LxWxH (mm) / (inch):
360 x 170 x 210 / 14,2 x 6,7 x 8,3
Weight (kg) / (lb):
8,5 / 18,7
Packing unit:
1,0
FLUIDAxx
Item number FLUIDAxx 40 l/min
23 643
12 V-DC-G 1“ male-G 1“ male-BM
B
Specification • Designed for floor mounting (BM)
FLUIDAxx 40 l/min
23 644
12 V-DC-G 1“ male-G 1“ male-DM Specification • Designed for mounting on ceilings (DM)
FLUIDAxx 40 l/min
23 645
12 V-DC-G 1“ male-G 1“ male-WML Specification • Designed for left hand wall mounting (WML)
FLUIDAxx 40 l/min
23 646
12 V-DC-G 1“ male-G 1“ male-WMR Specification • Designed for right hand wall mounting (WMR)
39
PUMPS Oil pumps
Technical data
Specification • On/Off switch
Connecting cable, length (m):
1,8
Connection suction side:
G 3/4“ male
Connection discharge side:
G 1/2‘‘ male
Hydraulic data
• Adjustable by-pass (pre-set at 7 bar) • with venting valve • Acc. to TRBF • Can not be calibrated for public sales (NEF)
Pump design:
Gearwheel pump, selfpriming
Delivery rate under free discharge (l/min):
10
Suction height (m):
3,5
Flow media:
oils up to SAE 90
Motor data
Features & Benefits • Internal gear pump with corrugated filling part. This construction effects: • Marginal inhomogeneous grade of volume flow rate • Low noise level
Power (kW):
0,5
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation – a real endurance runner
Rotation speed (rpm):
1450
• Optimal suction characteristics
Protection class:
IP 54
• Pump for tank and wall mounting
• Compact construction • The longer tooth engagement provides an improved seal effect and a better suction and discharge angle
• Recommended accessories for wall mounting: (19 512) and (19 522), (19 523), (19 523 001) Packaging Packing unit:
40
1,0
Internal gear pumps with sickle filling piece
Item number Technical data
Oil pump 10 l/min-set-NEF
Discharge pressure up to (bar):
16
Voltage (V):
400
Frequency (Hz):
50
Power consumption (A):
1,7
Torque (Nm):
3,5
Dimensions LxWxH (mm):
310 x 320 x 205
Weight (kg):
11,8
23 322
400 V-3~AC
B
Features & Benefits • Pump is designed for use in conjunction with pipe lines up to 70 meters, depending on cross section of pipe line Packaging • Dimensions LxWxH (mm):
380 x 360 x 250
• Weight (kg):
12,4
Technical data Discharge pressure up to (bar): 10 Voltage (V): 230 Frequency (Hz): 50 Power consumption (A): 5,5 Torque (Nm): 2 Dimensions LxWxH (mm): 310 x 320 x 205 Weight (kg): 14,7 Features & Benefits • Pump is designed for use in conjunction with pipe lines up to 70 meters, depending on cross section of pipe line
Oil pump 10 l/min-set-NEF 230 V-1~AC-50 Hz-EUS
23 321
Oil pump 10 l/min-NEF 230 V-1~AC-50 Hz-EUS
23 337
Packaging • Dimensions LxWxH (mm):
380 x 360 x 250
• Weight (kg):
15,38
Technical data Discharge pressure up to (bar): 10 Voltage (V): 230 Frequency (Hz): 50 Power consumption (A): 5,5 Torque (Nm): 2 Dimensions LxWxH (mm): 290x200x210 Weight (kg): 12,6 Features & Benefits • Pump is designed for use in conjunction with pipe lines up to 70 meters, depending on cross section of pipe line Packaging • Dimensions LxWxH (mm):
370 x 220 x 200
• Weight (kg):
12,9
41
PUMPS Grease pumps
Technical data
Specification
Pump drive speed (rpm):
101
• Double-acting pump
Max. delivery (g/cycle):
1,37
• 2-stage planetary gear
Max. delivery (cm³/min):
138,4
• Display for stroke frequency
Delivery (speed dependent) (lb/min):
0-0.304
Delivery (speed dependent) (gramme/min):
0-138
Max. admissible operating pressure (bar/psi):
345/5004
• 2 pressure side connections
Operating temperature area (°C) / (°F):
-40 / +65 -40 / +149
• 4 fastening threads in the housing
Current consumption max. (A):
25
Power (W):
550
Operating voltage (V):
24 V DC
Protection class:
IP 54
Length of connecting cable (m):
1
Connection discharge side:
G 1/4‘‘ female
• Separate oil filler screw • Electronically controlled servomotor • Seawater resistant housing made of die-cast aluminium
• Accessories: pressure relief valve (61 660) + grease pump controller (61 550) • Low-voltage protection 18 Volts, at this voltage, the pump switches off automatically • Overvoltage protection 28 Volts, at this voltage, the pump switches off automatically Features & Benefits • Made in Germany • Resistant to vibrations and shocks • Very long service life thanks to hardened and grounded sealing surfaces • Easily accessible rotary potentiometer for infinitely variable motor speed control • Gearwheels made from high-strength tool steel, internal ring gears made from high-strength heat-treated steel, sun and planet wheels made from case hardened steel • High-quality teeth, thus excellent running smoothness and long gearbox lifetime • Con-rod and piston actuator in oil bath with sight glass • Splashproof housing and motor • External parts resistant to corrosion Packaging Packing unit:
42
1,0
Electric grease pumps
Item number Technical data
Grease pump - electrical
Length of suction tube (mm) / (inch):
348 / 13,7
Weight (kg) / (lb):
8,94 / 19,7
61 501
SRL 348-17,5-kg-bucket
Technical data
Grease pump - electrical
Length of suction tube (mm) / (inch):
483 / 19
Weight (kg) / (lb):
9,55 / 21,1
B
61 503
SRL 483-30-kg-bucket
Technical data
Grease pump - electrical
Length of suction tube (mm) / (inch):
505 / 19,9
Weight (kg) / (lb):
9,7 / 21,4
61 505
SRL 505-30-kg-barrel
Technical data
Grease pump - electrical
Length of suction tube (mm) / (inch):
699 / 27,5
Weight (kg) / (lb):
10,7 / 23,6
61 507
SRL 699-60-kg-barrel
Technical data
Grease pump - electrical
Length of suction tube (mm) / (inch):
864 / 34
Weight (kg) / (lb):
11,5 / 25,4
61 509
SRL 864-200-kg-barrel
43
PUMPS Grease pumps
Technical data
Specification
Voltage (V):
24
Current consumption, controller (A):
• Output signal for occuring errors in the controller (e. g. voltage too low)
0,2
• Countdown display of the active lubrication and break times
Switch stream max. (A):
30
• Function for activating manual lubrication
Protection class:
IP 54
Radio shielding:
an den Schaltkontakten
Connecting cable (m) / (ft):
2 / 6,6
Temperature range (°C) / (°F):
-40 / +75 -40 / +167
Duty cycle (s):
1-999
Break time (min):
1-999
• Electronics in anodized aluminium housing • Housing with connector sockets for input and output signals • Error messages on the display Features & Benefits • For the time-controlled operation of a grease pump 24 V-DC
Output signal Switch stream max. (A):
2
Voltage (V):
24
Connecting cable (m) / (ft):
3 / 9,8
Dimensions LxWxH (mm) / (inch):
125 x 155 x 60 / 4,9x 6,1 x 2,7
Weight (kg) / (lb):
1,17 / 2,58
44
• LED display of the active lubrication and break times
• Monitoring of lubrication possible by means of a pulse generator in the grease line Packaging Packing unit:
1,0
Accessories for grease pumps
Item number Grease pump controller
61 550
24 V-DC
B
45
PUMPS Grease pumps
Technical data
Specification • Pulse generator for monitoring grease lubrication systems or determining the volume flow (only in conjunction with FMS or grease pump control)
Connection 1:
G 1/8'' female
Connection 2:
G 1/8'' female
Application range:
Greases NLGI 00-3
Flow rate (cm³/min):
0-1000
Operating pressure max. (bar/psi):
700/10153
Burst pressure (bar/psi):
1000/14504
Accuracy of repeated processes 0-300 bar (%):
1
Contact-form:
A-shut-up device
Switching capacity (W):
10
Operating voltage (V):
3 - 30 V DC
Operating current (A):
0,5
Dimensions LxWxH (mm):
6,1 x 5,51 x 4,33
Switch stream (A):
0,5
Dimensions LxWxH (mm):
155 x 140 x 110
Sensor resistor (mOhm):
300
Temperature range (°C):
-40 / +70
Weight (kg):
0,588
Temperature range (°F):
-40 / +158
Weight (kg):
0,266
Housing material:
AlSi 12 (sea water resistant)
Packing unit:
1.0
Surface treatment:
Black, coated by cataphoresis
Dimensions LxWxH (mm):
84 x 54 x 46
Dimensions LxWxH (mm):
3,31 x 2,12 x 1,81
Weight (kg):
1,05
Weight (kg):
0,408
46
Features & Benefits • For greases of consistency class NLGI 00-3 • Rugged aluminium housing, coated by cataphoresis • Splashproof housing • Impact-resistant electronics Packaging
Accessories for grease pumps
Item number Pulse generator for grease lubrication systems
61 560
B
47
PUMPS Grease pumps
Technical data
Specification • Counter nut to secure the adjusting screw
Connection pressure side (P):
2 x G 1/4''
Connection return (R):
G 1/4''
Application range:
Lubricating greases NLGI 00-3
Flow range (cm³/min):
0-1000
Operating pressure max. (bar/psi):
400 / 5802
Burst pressure (bar/psi):
1000 / 14504
Temperature range (°C):
-40 / +70
Temperature range (°F):
-40 /+ 158
Material:
steel
Packaging
Surface treatment:
galvanised
Dimensions LxWxH (inch):
6,1 x 5,51 x 4,33
Weight (kg):
0,408
Weight (kg):
1,05
Dimensions LxWxH (mm):
155 x 140 x 110
Dimensions LxWxH (mm):
30x55,5x108
Weight (lb):
0,588
Dimensions LxWxH (mm):
1,18x1,31x4,25
Weight (kg):
0,266
Packing unit:
1.0
48
• Infinitely variable maximum pressure Features & Benefits • Pressure relief valve as protection against exceeding the maximum permissible pressure in the system • For rough operational conditions • For direct installation in the pressure line
Accessories for grease pumps
Item number Pressure relief valve
61 660
400 bar / 5800 psi adjustable
B
49
PUMPS Electric diaphragm pumps AdBlue®
Technical data
Specification • Urea electrical diaphragm pump with integrated bypass
Connecting cable, Länge (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ male
Connection discharge side:
G 1‘‘ male
• On/Off switch Features & Benefits • First class construction of electric machines and pumps
Hydraulic data Pump design:
Diaphragm pump, self-priming
• Designed for a long service life
Delivery rate under free discharge (l/min) / (gpm):
35 / 9,2
Suction height up to (m) / (ft):
3 / 9,8
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
Discharge pressure up to (bar) / (psi):
1,7 / 24,6
• Motor and switch case made of shock resistant, die-cast aluminium
Pumping media:
AdBlue®, water
• Continuous operation – a real endurance runner • Suction hight 3 m / 9,8 ft
Motor data Insulation class:
F
Packaging
Highest permissible limit temperature (°C) / (°F):
155 / 311
Thermal protection:
self resetting
Dimensions LxWxH (mm) / (inch):
338 x 200 x 196 / 13,3 x 7,9 x 7,7
Duty cycle (min):
Continuous operation
Weight (kg) / (lb):
7,51 /16,5
Type of construction:
IMB 3
Packing unit:
1,0
Protection class:
IP 54
Materials of parts in contact with liquid Membran and Seals:
EPDM / FKM
Pump housing:
PP
Dimensions LxWxH (mm) / (inch):
310 x 180 x 160 / 12,2 x 7,1 x 6,3
Weight (kg) / (lb):
6,86 / 15,2
50
Electric diaphragm pumps AdBlue速 35 l/min, 9,2 gpm
Item number Technical data
Urea electric diaphragm pump
25 280
B
35 l/min-230 V-1~AC-50 Hz Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
1,5
Power (kW):
0,36
Rotation speed (rpm):
2800
51
PUMPS Electric diaphragm pumps AdBlue®
Technical data
Specification • Urea electrical diaphragm pump with integrated bypass
Connecting cable, Länge (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ male
Connection discharge side:
G 1‘‘ male
• On/Off switch Features & Benefits • First class construction of electric machines and pumps
Hydraulic data Pump design:
Diaphragm pump, self-priming
• Designed for a long service life
Delivery rate under free discharge (l/min) / (gpm):
30 / 7,9
Suction height up to (m) / (ft):
3 / 9,8
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
Discharge pressure up to (bar) / (psi):
1,7 / 24,6
• Motor and switch case made of shock resistant, die-cast aluminium
Pumping media:
AdBlue®, water
• Continuous operation - 3 hours - with open valve • Suction hight 3 m / 9,8 ft
Motor data Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Duty cycle (min) under free discharge max.:
180
Duty cycle (min) under free discharge max.:
2
Rotation speed (rpm):
2800
Type of construction:
IMB 5
Protection class:
IP 54
Materials of parts in contact with liquid Membran and Seals:
EPDM / FKM
Pump housing:
PP
52
Packaging Packing unit:
1,0
Electric diaphragm pumps AdBlue速 30 l/min, 7,9 gpm, 12 V + 24 V
Item number Technical data
Urea electric diaphragm pump
Voltage (V):
12 V DC
Power consumption (A):
14
Power (kW):
0,2
Technical data 24 V DC
Power consumption (A):
9
Power (kW):
0,22
B
30 l/min-7,9 gpm-12 V-DC
Urea electric diaphragm pump
Voltage (V):
25 281
25 282
30 l/min-7,9 gpm-24 V-DC
53
FUELLING STATIONS
technic that leads
54
outperformed + outlast C
55
FUELLING STATIONS TANKFIxx
Technical data
Specification
Connection suction side:
G 1‘‘ i
• On/Off switch through control valve
Connection discharge side:
G 1‘‘ i
• Lockable door • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
• In-line meter/pulse meter, IPG, digital (23 820)
60 / 15,8
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
• Diesel-exchange filter, 30 µm (23 209)
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
Motor data
• Packed in a safe transport box Features & Benefits • First class construction of electric machines and pumps
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
3
Power (kW):
0,6
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
• Motor and switch case made of shock resistant, die-cast aluminium
Torque (Nm):
1,27
Rotation speed (rpm):
3250
• Continuous operation
Type of construction:
IMB 3
Protection class:
IP 54
Materials of parts in contact with liquid
• Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance
Seals:
FKM (Viton®)
• Overlapping lid on housing, therebye ingress of splashing water avoided
Pump housing:
AlSi 12 (sea water resistant)
• Lockable aluminium housing
Rotor:
1.4301
Vane:
POM
• Surface of all structural parts, including the housing, powder coated, 10µ thickness
Dimensions LxWxH (mm) / (inch):
350 x 350 x 1670 / 13,78 x 13,78 x 65,75
Weight (kg) /(lb):
55 / 121
• Connection for suction tube on housing bottom • Stable base which can be secured to the floor • Side mounted hose holder Packaging
56
Dimensions LxWxH (mm) / (inch):
1790 x 445 x 525 70,47 x 17,52 x 17,52
Weight including package (kg) /(lb):
104,6 / 230,6
Packing unit:
1,0
TANKFIxx with digital display 60 l/min, 15,8 gpm
Item number Specification
TANKFIxx 60 l/min-filter
• Vane pump, with integral bypass (23 430)
230 V-50 Hz-DAZ-ZVAD-4 m
23 370
• Digital display, access with code (DAZ)
C
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ i (23 155 957)
Specification
TANKFIxx 60 l/min-filter
• Vane pump, with integral bypass (23 430)
230 V-50 Hz-DAZ-ZVAD-6 m
23 370 001
• Digital display, access with code (DAZ) • Discharge hose, 6 m, DN 19, G 1“ male, G 1“ i (23 155 958)
57
FUELLING STATIONS TANKFIxx
Technical data
Specification
Connection suction side:
G 1‘‘ i
• On/Off switch through control valve
Connection discharge side:
G 1‘‘ i
• Lockable door • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
• In-line meter/pulse meter, IPG, digital (23 820)
100 / 26,4
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
Discharge pressure up to (bar) / (psi):
2,2 / 31,9
• Diesel-exchange filter, 30 µm (23 209)
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
Motor data
• Packed in a safe transport box Features & Benefits • First class construction of electric machines and pumps
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
5,7
Power (kW):
1,2
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
• Motor and switch case made of shock resistant, die-cast aluminium
Torque (Nm):
4,1
Rotation speed (rpm):
1750
• Continuous operation
Type of construction:
IMB 3
Protection class:
IP 54
Materials of parts in contact with liquid
• Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance
Seals:
FKM (Viton®)
• Overlapping lid on housing, therebye ingress of splashing water avoided
Pump housing:
AlSi 12 (sea water resistant)
• Lockable aluminium housing
Rotor:
1.4301
Vane:
POM
• Surface of all structural parts, including the housing, powder coated, 10µ thickness
Dimensions LxWxH (mm) / (inch):
350 x 350 x 1670 / 13,78 x 13,78 x 65,75
Weight (kg) /(lb):
61 / 134,48
• Connection for suction tube on housing bottom • Stable base which can be secured to the floor • Side mounted hose holder Packaging
58
Dimensions LxWxH (mm) / (inch):
1790 x 445 x 525 70,47 x 17,52 x 17,52
Weight including package (kg) /(lb):
110,5 / 243,6
Packing unit:
1,0
TANKFIxx with digital display 100 l/min, 26,4 gpm
Item number Specification • Vane pump, with integral bypass (23 433)
TANKFIxx 100 l/min-filter
23 372
230 V-50 Hz-DAZ-ZVAD-4 m
• Digital display, access with code (DAZ)
C
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ i (23 155 957)
Specification • Vane pump, with integral bypass (23 433)
TANKFIxx 100 l/min-filter
23 372 001
230 V-50 Hz-DAZ-ZVAD-6 m
• Digital display, access with code (DAZ) • Discharge hose, 6 m, DN 19, G 1“ male, G 1“ i (23 155 958)
59
FUELLING STATIONS TANKFIxx
Technical data
Specification
Connection suction side:
G 1‘‘ i
• On/Off switch through control valve
Connection discharge side:
G 1‘‘ i
• Lockable door • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
• In-line meter/pulse meter, IPG, digital (23 820)
60 / 15,8
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
• Diesel-exchange filter, 30 µm (23 209)
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
Motor data
• Packed in a safe transport box Features & Benefits • First class construction of electric machines and pumps
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
3
Power (kW):
0,6
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
• Motor and switch case made of shock resistant, die-cast aluminium
Torque (Nm):
1,27
Rotation speed (rpm):
3250
• Continuous operation
Type of construction:
IMB 3
Protection class:
IP 54
Materials of parts in contact with liquid
• Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance
Seals:
FKM (Viton®)
• Overlapping lid on housing, therebye ingress of splashing water avoided
Pump housing:
AlSi 12 (sea water resistant)
• Lockable aluminium housing
Rotor:
1.4301
Vane:
POM
• Surface of all structural parts, including the housing, powder coated, 10µ thickness
Dimensions LxWxH (mm) / (inch):
350 x 350 x 1670 / 13,78 x 13,78 x 65,75
Weight (kg) /(lb):
55 / 121
• Connection for suction tube on housing bottom • Stable base which can be secured to the floor • Side mounted hose holder Packaging
60
Dimensions LxWxH (mm) / (inch):
1790 x 445 x 525 70,47 x 17,52 x 17,52
Weight including package (kg) /(lb):
104,6 / 230,6
Packing unit:
1,0
TANKFIxx with Diesel management system 60 l/min, 15,8 gpm
Item number Specification
TANKFIxx 60 l/min-filter
• Vane pump, with integral bypass (23 430)
230 V-50 Hz-DMS-ZVAD-4 m
23 371
• Diesel Management System (DMS) in aluminium housing with integrated heating (23 499)
C
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ i (23 155 957)
Specification
TANKFIxx 60 l/min-filter
• Vane pump, with integral bypass (23 430)
230 V-50 Hz-DMS-ZVAD-6 m
23 371 001
• Diesel Management System (DMS) in aluminium housing with integrated heating (23 499) • Discharge hose, 6 m, DN 19, G 1“ male, G 1“ i (23 155 958)
61
FUELLING STATIONS TANKFIxx
Technical data
Specification
Connection suction side:
G 1‘‘ i
• On/Off switch through control valve
Connection discharge side:
G 1‘‘ i
• Lockable door • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
• In-line meter/pulse meter, IPG, digital (23 820)
100 / 26,4
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
Discharge pressure up to (bar) / (psi):
2,2 / 31,9
• Diesel-exchange filter, 30 µm (23 209)
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
Motor data
• Packed in a safe transport box Features & Benefits • First class construction of electric machines and pumps
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
5,7
Power (kW):
1,2
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
• Motor and switch case made of shock resistant, die-cast aluminium
Torque (Nm):
4,1
Rotation speed (rpm):
1750
• Continuous operation
Type of construction:
IMB 3
Protection class:
IP 54
Materials of parts in contact with liquid
• Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance
Seals:
FKM (Viton®)
• Overlapping lid on housing, therebye ingress of splashing water avoided
Pump housing:
AlSi 12 (sea water resistant)
• Lockable aluminium housing
Rotor:
1.4301
Vane:
POM
• Surface of all structural parts, including the housing, powder coated, 10µ thickness
Dimensions LxWxH (mm) / (inch):
350 x 350 x 1670 / 13,78 x 13,78 x 65,75
Weight (kg) /(lb):
61 / 134,48
• Connection for suction tube on housing bottom • Stable base which can be secured to the floor • Side mounted hose holder Packaging
62
Dimensions LxWxH (mm) / (inch):
1790 x 445 x 525 70,47 x 17,52 x 17,52
Weight including package (kg) /(lb):
110,5 / 243,6
Packing unit:
1,0
TANKFIxx with Diesel management system 100 l/min, 26,4 gpm
Item number Specification • Vane pump, with integral bypass (23 433)
TANKFIxx 100 l/min-filter
23 373
230 V-50 Hz-DMS-ZVAD-4 m
• Diesel Management System (DMS) in aluminium housing with integrated heating (23 499)
C
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ i (23 155 957)
Specification • Vane pump, with integral bypass (23 433)
TANKFIxx 100 l/min-filter
23 373 001
230 V-50 Hz-DMS-ZVAD-6 m
• Diesel Management System (DMS) in aluminium housing with integrated heating (23 499) • Discharge hose, 6 m, DN 19, G 1“ male, G 1“ i (23 155 958)
63
FUELLING STATIONS DIESELFIxx
Technical data
Specification
Connection suction side:
G 1‘‘ i
• Vane pump, with integral bypass (23 430)
Connection discharge side:
G 1‘‘ i
• On/Off switch through control valve • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
60 / 15,8
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
• In-line meter NUMERIxx³, three digits (23 192) • Suction hose for mounting recommended: 1,6 m (23 156) 2,0 m (23 158 959) 4,0 m (23 155 950) 6,0 m (23 155 956) • Foot valve with filter (19 890) • Barrel screw coupling, G 2‘‘ male, G 1“ male
Motor data Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
3
Power (kW):
0,6
Insulation class:
F
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
Torque (Nm):
1,27
Rotation speed (rpm):
3250
Type of construction:
IMB 3
Protection class:
IP 54
• Packed in carton box Features & Benefits • First class construction of electric machines and pumps • Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Motor and switch case made of shock resistant, die-cast aluminium • Continuous operation
Materials of parts in contact with liquid
• Suction hight 5m/16,4 ft
Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
• Small tolerances provide a high suction- and pressure performance
Rotor:
1.4301
Vane:
POM
• Can be directly wall mounted or completed with column used as filling station • Powder coated surfaces, 10 µm thickness • Shapely housing Packaging Packing unit:
64
1,0
DIESELFIxx 60 l/min, 15,8 gpm
Item number Specification • Vane pump, with integral bypass (23 430)
DIESELFIxx 60 l/min-230 V
23 513
50 Hz-EUS-EBZM-ZVAD-6 m
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
C
• Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958)
Specification • Vane pump, with integral bypass (23 430)
DIESELFIxx 60 l/min-230 V
23 513 001
50 Hz-EUS-EBZM-ZVABD-4 m
• Automatic nozzle valve with German design approval and swivel, ZVABD (23 168) • Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957)
Specification
DIESELFIxx 60 l/min-230 V
• Vane pump, with integral bypass (23 430)
50 Hz-EUS-EBZM-F-ZVAD-4 m
23 513 011
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957) • Diesel-exchange filter, 30 µm (23 209)
Specification
DIESELFIxx 60 l/min-230 V
• Vane pump, with integral bypass (23 430)
50 Hz-EUS-EBZM-F-ZVABD-6 m
23 513 002
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958) • Diesel-exchange filter, 30 µm (23 209)
65
FUELLING STATIONS DIESELMAxx
Technical data
Specification
Connection suction side:
G 1‘‘ i
• On/Off switch through control valve
Connection discharge side:
G 1‘‘ i
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data
• In-line meter NUMERIxx³, three digits (23 192)
Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
100 / 26,4
Discharge pressure up to (bar) / (psi):
2,2 / 31,9
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
• Suction hose for mounting recommended: 1,6 m (23 156) 2,0 m (23 158 959) 4,0 m (23 155 950) 6,0 m (23 155 956) • Foot valve with filter (19 890) • Barrel screw coupling, G 2‘‘ male, G 1“ male • Packed in carton box
Motor data Voltage (V):
230
Frequency (Hz):
50
Features & Benefits
Power consumption (A):
5,7
• First class construction of electric machines and pumps
Power (kW):
1,2
Insulation class:
F
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
Torque (Nm):
4,1
Rotation speed (rpm):
1750
• Motor and switch case made of shock resistant, die-cast aluminium
Type of construction:
IMB 3
• Continuous operation
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
1.4301
Vane:
POM
• Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance • Can be directly wall mounted or completed with column used as filling station • Powder coated surfaces, 10 µm thickness • Shapely housing Packaging Packing unit:
66
1,0
DIESELMAxx 100 l/min, 26,4 gpm
Item number Specification • Vane pump, with integral bypass (23 433)
DIESELMAxx 100 l/min230 V
23 515
50 Hz-EUS-EBZM-ZVAD-6 m
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
C
• Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958)
Specification
DIESELMAxx 100 l/min230 V
• Vane pump, with integral bypass (23 433)
50 Hz-EUS-EBZM-ZVAD-4 m
23 515 001
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957)
Specification • Vane pump, with integral bypass (23 433)
DIESELMAxx 100 l/min230 V
23 515 011
50 Hz-EUS-EBZM-F-ZVAD-4 m
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957) • Diesel-exchange filter, 30 µm (23 209)
Specification • Vane pump, with integral bypass (23 433)
DIESELMAxx 100 l/min230 V
23 515 002
50 Hz-EUS-EBZM-F-ZVAD-6 m
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958) • Diesel-exchange filter, 30 µm (23 209)
67
FUELLING STATIONS DIESELFIxx with Diesel management system
Technical data
Specification
Connection suction side:
G 1‘‘ i
• On/Off switch through control valve
Connection discharge side:
G 1‘‘ i
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
60 / 15,8
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
• Diesel Management System (DMS) in aluminium housing (23 499) • Suction hose for mounting recommended: 1,6 m (23 156) 2,0 m (23 158 959) 4,0 m (23 155 950) 6,0 m (23 155 956) • Foot valve with filter (19 890) • Barrel screw coupling, G 2‘‘ male, G 1“ male
Motor data
• Packed in carton box
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
3
Power (kW):
0,6
• First class construction of electric machines and pumps
Insulation class:
F
• Designed for a long service life
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
Torque (Nm):
1,27
Rotation speed (rpm):
3250
Type of construction:
IMB 3
• Motor and switch case made of shock resistant, die-cast aluminium
Protection class:
IP 54
• Continuous operation
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
1.4301
Vane:
POM
Features & Benefits
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance • Can be directly wall mounted or completed with column used as filling station • Powder coated surfaces, 10 µm thickness • Shapely housing Packaging Packing unit:
68
1,0
DIESELFIxx 60 l/min, 15,8 gpm with Diesel management system
Item number Specification • Vane pump, with integral bypass (23 430)
DIESELFIxx 60 l/min-230 V
23 513 111
50 Hz-EUS-DMS-IPG-ZVAD-4 m
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
C
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957)
Specification
DIESELFIxx 60 l/min-230 V
• Vane pump, with integral bypass (23 430)
50 Hz-EUS-DMS-IPG-ZVAD-6 m
23 513 101
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958)
Specification • Vane pump, with integral bypass (23 430)
DIESELFIxx 60 l/min-230 V
23 513 102
50 Hz-EUS-DMS-IPG-F-ZVAD-4 m
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957) • Diesel-exchange filter, 30 µm (23 209)
Specification
DIESELFIxx 60 l/min-230 V
• Vane pump, with integral bypass (23 430)
50 Hz-EUS-DMS-IPG-F-ZVAD-6 m
23 513 100
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958) • Diesel-exchange filter, 30 µm (23 209)
69
FUELLING STATIONS DIESELMAxx with Diesel management system
Technical data
Specification
Connection suction side:
G 1‘‘ i
• On/Off switch through control valve
Connection discharge side:
G 1‘‘ i
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
100 / 26,4
Discharge pressure up to (bar) / (psi):
2,2 / 31,9
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
• Diesel Management System (DMS) in aluminium housing (23 499) • Suction hose for mounting recommended: 1,6 m (23 156) 2,0 m (23 158 959) 4,0 m (23 155 950) 6,0 m (23 155 956) • Foot valve with filter (19 890) • Barrel screw coupling, G 2‘‘ male, G 1“ male
Motor data
• Packed in carton box
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
5,7
Power (kW):
1,2
• First class construction of electric machines and pumps
Insulation class:
F
• Designed for a long service life
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
Torque (Nm):
4,1
Rotation speed (rpm):
1750
Type of construction:
IMB 3
• Motor and switch case made of shock resistant, die-cast aluminium
Protection class:
IP 54
• Continuous operation
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
1.4301
Vane:
POM
Features & Benefits
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance • Can be directly wall mounted or completed with column used as filling station • Powder coated surfaces, 10 µm thickness • Shapely housing Packaging Packing unit:
70
1,0
DIESELMAxx, 100 l/min, 26,4 gpm with Diesel management system
Item number Specification • Vane pump, with integral bypass (23 433)
DIESELMAxx 100 l/min230 V
23 515 111
50 Hz-EUS-DMS-IPG-ZVAD-4 m
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
C
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957)
Specification • Vane pump, with integral bypass (23 433)
DIESELMAxx 100 l/min230 V
23 515 101
50 Hz-EUS-DMS-IPG-ZVAD-6 m
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958)
Specification • Vane pump, with integral bypass (23 433)
DIESELMAxx 100 l/min230 V
23 515 102
50 Hz-EUS-DMS-IPG-F-ZVAD-4 m
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957) • Diesel-exchange filter, 30 µm (23 209)
Specification • Vane pump, with integral bypass (23 433)
DIESELMAxx 100 l/min230 V
23 515 100
50 Hz-EUS-DMS-IPG-F-ZVAD-6 m
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958) • Diesel-exchange filter, 30 µm (23 209)
71
FUELLING STATIONS DIESELFIxx / DIESELMAxx
Technical data
Specification
Material:
steel
Lacquering:
light grey, RAL 7035
Size (mm):
1,5
• Suface protected with Duracryl (good resistance against light-, heat- and weatherconditions, durable and scratchresistant surface, very good slovent resistancy, grafiti-resistant) Features & Benefits • Shapely housing Packaging Packing unit:
72
1,0
Supports for DIESELFIxx / DIESELMAxx
Item number Specification • Suitable for DIESELFIxx with EBZM
Pedestal for DIESELFIxx
23 070 020
sheet steel340x231x1040 mm
C
Specification • Suitable for DIESELFIxx with DMS
Specification • Suitable for DIESELMAxx with EBZM
Specification • Suitable for DIESELMAxx with DMS
Pedestal for DIESELFIxx
23 070 021
sheet steel356x208x1040 mm
Pedestal for DIESELMAxx
23 070 022
sheet steel410x231x1040 mm
Pedestal for DIESELMAxx
23 070 023
sheet steel386x208x1040 mm
73
VANE PUMP SETS
technic that leads
74
outperformed + outlast
D
75
76
D
77
VANE PUMP SETS For barrel screw mounting
Technical data
Specification • For 200 up to 1000 l container
Connecting cable, length (m) / (ft):
2/7
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data
• Barrel screw coupling, G 2‘‘ male, G 1“ male (19 524) • Vane pump, with integral bypass • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
• Filter strainer prevents dirt from being sucked up into the pump
60 / 15,8
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
• Discharge hose, 4 m / 13,1 ft, DN 25, G 1“ male, G 1“ female (23 155 957)
Suction height (m) / (ft):
5 / 17
• Suction hose, 1,6 m / 5,2 ft, DN 25, G 1“ male, G 1“ female (23 156)
Pumping media:
fuel oil and diesel
• Foot valve with filter (19 890) • Valuable sales package
Motor data Voltage (V):
230
Frequency (Hz):
50
Features & Benefits
Power consumption (A):
3
• First class construction of electric machines and pumps
Power (kW):
0,6
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
Torque (Nm):
1,27
Rotation speed (rpm):
3250
Type of construction:
IMB 3
• Suction hight 5m/16,4 ft
Protection class:
IP 54
• Small tolerances provide a high suction- and pressure performance
• Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Motor and switch case made of shock resistant, die-cast aluminium • Continuous operation
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Packaging
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
1.4301
Dimensions LxWxH (mm) / (inch):
350 x 350 x 300 / 13,8 x 13,8 x 11,8
Vane:
POM
Weight including package (kg) / (lb):
10,64 / 23,5
Dimensions LxWxH (mm) / (inch):
280 x 115 x 170 / 11 x 4,5 x 6,7
Packing unit:
1,0
Weight (kg) / (lb):
9,54 / 21
78
ROTAxx 60 l/min, 15,8 gpm
Item number Specification
ROTAxx 60 l/min230 V-1~AC
• On/Off switch
50 Hz-EUS-ZVPP-4 m
23 931
• Polypropylene nozzle valve, ZVPP (23 161)
D
Specification
ROTAxx 60 l/min230 V-1~AC
• On/Off switch
50 Hz-EUS-ZVAD-4 m
23 937
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
Specification • On/Off switch through control valve
ROTAxx 60 l/min230 V-1~AC
23 947
50 Hz-EUS-ZVAD-4 m-ZVS
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
79
VANE PUMP SETS For barrel screw mounting
Technical data
Specification • For 200 up to 1000 l container
Connecting cable, length (m) / (ft):
2/7
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data
• Barrel screw coupling, G 2‘‘ male, G 1“ male (19 524) • Vane pump, with integral bypass • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
• Filter strainer prevents dirt from being sucked up into the pump
60 / 15,8
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
• Discharge hose, 4 m / 13,1 ft, DN 25, G 1“ male, G 1“ female (23 155 957)
Suction height (m) / (ft):
5 / 17
• Suction hose, 1,6 m / 5,2 ft, DN 25, G 1“ male, G 1“ female (23 156)
Pumping media:
fuel oil and diesel
• Foot valve with filter (19 890) • Valuable sales package
Motor data Voltage (V):
230
Frequency (Hz):
50
Features & Benefits
Power consumption (A):
3
• First class construction of electric machines and pumps
Power (kW):
0,6
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
Torque (Nm):
1,27
Rotation speed (rpm):
3250
Type of construction:
IMB 3
• Suction hight 5m/16,4 ft
Protection class:
IP 54
• Small tolerances provide a high suction- and pressure performance
• Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Motor and switch case made of shock resistant, die-cast aluminium • Continuous operation
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Packaging
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
1.4301
Dimensions LxWxH (mm) / (inch):
350 x 350 x 300 / 13,8 x 13,8 x 11,8
Vane:
POM
Weight including package (kg) / (lb):
10,64 / 23,5
Dimensions LxWxH (mm) / (inch):
280 x 115 x 170 / 11 x 4,5 x 6,7
Packing unit:
1,0
Weight (kg) / (lb):
9,54 / 21
80
ROTAxx 60 l/min, 15,8 gpm
Item number Specification
ROTAxx 60 l/min230 V-1~AC
• On/Off switch
50 Hz-EUS-ZVAD-EBZM-4 m
23 938
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • In-line meter NUMERIxx³, three digits (23 193)
Specification • On/Off switch through control valve
D
ROTAxx 60 l/min230 V-1~AC
23 948
50 Hz-EUS-ZVADEBZM-4 m-ZVS
• Automatic nozzle valve with swivel joint, ZVAD (23 176) • In-line meter NUMERIxx³, three digits (23 193)
81
VANE PUMP SETS For barrel screw mounting
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge up to (l/min) / (gpm):
54 / 14,3
• Vane pump, with integral bypass • Barrel screw coupling, G 2‘‘ male, G 1“ male (19 524) • On/Off switch • Fuse • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Filter strainer prevents dirt from being sucked up into the pump • Discharge hose, 4 m / 13,1 ft, DN 25, G 1" male, G 1" female (23 155 957) • Suction hose, 1,6 m / 5,2 ft, DN 25, G 1" male, G 1" female (23 156) • Foot valve with filter (19 890) • Valuable sales package
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Features & Benefits
Pumping media:
fuel oil and diesel
• First class construction of electric machines and pumps • Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions • Switch case made of shock resistant, die-cast zinc, coated by cataphoresis • Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis • Motor case, completely galvanised, coated external parts • Small tolerances provide a high suction- and pressure performance • The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F
Motor data Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
40 A plug-in fuse
Duty cycle (min) under free discharge max.:
180
Duty cycle (min) under free discharge max.:
2
Rotation speed (rpm):
2500
Type of construction:
IMB 5
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
82
Packaging Packing unit:
1,0
ROTAxx 54 l/min, 14,3 gpm, 12 + 24 V DC
Item number Technical data
ROTAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
23 911
ABK-ZVPP-4 m
D
Specification • Polypropylene nozzle valve, ZVPP (23 161)
Technical data
ROTAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
23 921
ABK-ZVPP-4 m
Specification • Polypropylene nozzle valve, ZVPP (23 161)
83
VANE PUMP SETS For barrel screw mounting
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge up to (l/min) / (gpm):
54 / 14,3
• Vane pump, with integral bypass • Barrel screw coupling, G 2‘‘ male, G 1“ male (19 524) • On/Off switch • Fuse • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Filter strainer prevents dirt from being sucked up into the pump • Discharge hose, 4 m / 13,1 ft, DN 25, G 1“ male, G 1“ female (23 155 957) • Suction hose, 1,6 m / 5,2 ft, DN 25, G 1“ male, G 1“ female (23 156) • Foot valve with filter (19 890) • Valuable sales package
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Features & Benefits
Pumping media:
fuel oil and diesel
• First class construction of electric machines and pumps • Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions • Switch case made of shock resistant, die-cast zinc, coated by cataphoresis • Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis • Motor case, completely galvanised, coated external parts • Small tolerances provide a high suction- and pressure performance • The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F
Motor data Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
40 A plug-in fuse
Duty cycle (min) under free discharge max.:
180
Duty cycle (min) under free discharge max.:
2
Rotation speed (rpm):
2500
Type of construction:
IMB 5
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
84
Packaging Packing unit:
1,0
ROTAxx 54 l/min, 14,3 gpm, 12 + 24 V DC
Item number Technical data
ROTAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
23 917
ABK-ZVAD-4 m
D
Specification • Automatic nozzle valve with swivel joint, ZVAD (23176)
Technical data
ROTAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
23 927
ABK-ZVAD-4 m
Specification • Automatic nozzle valve with swivel joint, ZVAD (23176)
Technical data
ROTAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
23 912
ABK-ZVPP-EBZM-4 m
Specification • Polypropylene nozzle valve, ZVPP (23 161) • In-line meter NUMERIxx³, three digits (23 192)
Technical data
ROTAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
23 922
ABK-ZVPP-EBZM-4 m
Specification • Polypropylene nozzle valve, ZVPP (23 161) • In-line meter NUMERIxx³, three digits (23 192)
85
VANE PUMP SETS For barrel screw mounting
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge up to (l/min) / (gpm):
54 / 14,3
• Vane pump, with integral bypass • Barrel screw coupling, G 2‘‘ male, G 1“ male (19 524) • On/Off switch • Fuse • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Filter strainer prevents dirt from being sucked up into the pump • Discharge hose, 4 m / 13,1 ft, DN 25, G 1“ male, G 1“ female (23 155 957) • Suction hose, 1,6 m / 5,2 ft, DN 25, G 1“ male, G 1“ female (23 156) • Foot valve with filter (19 890) • Valuable sales package
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Features & Benefits
Pumping media:
fuel oil and diesel
• First class construction of electric machines and pumps • Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions • Switch case made of shock resistant, die-cast zinc, coated by cataphoresis • Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis • Motor case, completely galvanised, coated external parts • Small tolerances provide a high suction- and pressure performance • The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F
Motor data Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
40 A plug-in fuse
Duty cycle (min) under free discharge max.:
180
Duty cycle (min) under free discharge max.:
2
Rotation speed (rpm):
2500
Type of construction:
IMB 5
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
86
Packaging Packing unit:
1,0
ROTAxx 54 l/min, 14,3 gpm, 12 + 24 V DC
Item number Technical data
ROTAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
23 918
ABK-ZVAD-EBZM-4 m
D
Specification • Automatic nozzle valve with swivel joint, ZVAD (23176) • In-line meter NUMERIxx³, three digits (23 192)
Technical data
ROTAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
23 928
ABK-ZVAD-EBZM-4 m
Specification • Automatic nozzle valve with swivel joint, ZVAD (23176) • In-line meter NUMERIxx³, three digits (23 192)
87
VANE PUMP SETS For barrel screw mounting
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge up to (l/min) / (gpm):
54 / 14,3
• Vane pump, with integral bypass • Barrel screw coupling, G 2‘‘ male, G 1“ male (19 524) • On/Off switch • Fuse • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Filter strainer prevents dirt from being sucked up into the pump • Discharge hose, 4 m / 13,1 ft, DN 25, G 1“ male, G 1“ female (23 155 957) • Suction hose, 1,6 m / 5,2 ft, DN 25, G 1“ male, G 1“ female (23 156) • Foot valve with filter (19 890) • Valuable sales package
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Features & Benefits
Pumping media:
fuel oil and diesel
• First class construction of electric machines and pumps • Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions • Switch case made of shock resistant, die-cast zinc, coated by cataphoresis • Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis • Motor case, completely galvanised, coated external parts • Small tolerances provide a high suction- and pressure performance • The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F
Motor data Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
40 A plug-in fuse
Duty cycle (min) under free discharge max.:
180
Duty cycle (min) under free discharge max.:
2
Rotation speed (rpm):
2500
Type of construction:
IMB 5
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
88
Packaging Packing unit:
1,0
ROTAxx 54 l/min, 14,3 gpm, 12 + 24 V DC
Item number Technical data
ROTAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
23 917 008
ABK-ZVAD-4 m-ZVH
D
Specification • Automatic nozzle valve with swivel joint, ZVAD (23176) • Control nozzle storage bracket
Technical data
ROTAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
23 927 008
ABK-ZVAD-4 m-ZVH
Specification • Automatic nozzle valve with swivel joint, ZVAD (23176) • Control nozzle storage bracket
89
VANE PUMP SETS For barrel screw mounting
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge up to (l/min) / (gpm):
54 / 14,3
• Vane pump, with integral bypass • Barrel screw coupling, G 2‘‘ male, G 1“ male (19 524) • On/Off switch • Fuse • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Filter strainer prevents dirt from being sucked up into the pump • Discharge hose, 4 m / 13,1 ft, DN 25, G 1“ male, G 1“ female (23 155 957) • Suction hose, 1,6 m / 5,2 ft, DN 25, G 1“ male, G 1“ female (23 156) • Foot valve with filter (19 890) • Valuable sales package
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Features & Benefits
Pumping media:
fuel oil and diesel
• First class construction of electric machines and pumps • Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions • Switch case made of shock resistant, die-cast zinc, coated by cataphoresis • Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis • Motor case, completely galvanised, coated external parts • Small tolerances provide a high suction- and pressure performance • The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F
Motor data Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
40 A plug-in fuse
Duty cycle (min) under free discharge max.:
180
Duty cycle (min) under free discharge max.:
2
Rotation speed (rpm):
2500
Type of construction:
IMB 5
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
90
Packaging Packing unit:
1,0
ROTAxx 54 l/min, 14,3 gpm, 12 + 24 V DC
Item number Technical data
ROTAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
23 918 008
ABK-ZVAD-EBZM-4 m-ZVH
D
Specification • Automatic nozzle valve with swivel joint, ZVAD (23176) • In-line meter NUMERIxx³, three digits (23 192) • Control nozzle storage bracket
Technical data
ROTAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
23 928 008
ABK-ZVAD-EBZM-4 m-ZVH
Specification • Automatic nozzle valve with swivel joint, ZVAD (23176) • In-line meter NUMERIxx³, three digits (23 192) • Control nozzle storage bracket
91
VANE PUMP SETS For barrel screw mounting
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge up to (l/min) / (gpm):
35 / 9,2
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,6 / 23,2
Pumping media:
fuel oil and diesel
Motor data Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
25 A plug-in fuse
Duty cycle (min) under free discharge max.:
180
Duty cycle (min) under free discharge max.:
2
Rotation speed (rpm):
3000
Type of construction:
IMB 5
Protection class:
IP 54
• Vane pump, with integral bypass • Barrel screw coupling, G 2‘‘ male, G 1“ male (19 524) • On/Off switch • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Filter strainer prevents dirt from being sucked up into the pump • Discharge hose, 4 m / 13,1 ft, DN 19, G 1“ male, G 1“ female (23 155 957) • Suction hose, 1,6 m / 5,2 ft, DN 25, G 1" male, G 1" female (23 156) • Foot valve with filter (19 890) • Universal control nozzle storage bracket (23 174) Features & Benefits • First class construction of electric machines and pumps • Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions • Switch case made of shock resistant, die-cast zinc, coated by cataphoresis • Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis • Motor case, completely galvanised, coated external parts • Small tolerances provide a high suction- and pressure performance • The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F
Materials of parts in contact with liquid
Packaging
Seals:
FKM (Viton®)
Packing unit:
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
Dimensions LxWxH (mm) / (inch):
270 x 120 x 120 / 10,6 x 4,7 x 4,7
Weight (kg) / (lb):
5 / 11
92
1,0
MOBIFIxx Industrial design 35 l/min / 9,2 gpm, 12 + 24 V DC
Item number Technical data
MOBIFIxx 35 l/min9,2 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
19
Power (W):
230
Torque (Nm):
0,38
23 517 090
ABK-ZVAD-4 m
D
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176)
Technical data
MOBIFIxx 35 l/min9,2 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
11
Power (W):
270
Torque (Nm):
0,6
23 517 086
ABK-ZVAD-4 m
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176)
Technical data
MOBIFIxx 35 l/min9,2 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
11
Power (W):
270
Torque (Nm):
0,6
23 517 087
ABK-ZVAD-EBZM-4 m
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176) • In-line meter NUMERIxx³, three digits (23 192)
93
VANE PUMP SETS For barrel screw mounting
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge up to (l/min) / (gpm):
54 / 14,3
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Pumping media:
fuel oil and diesel
Motor data Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
40 A plug-in fuse
Duty cycle (min) under free discharge max.:
180
Duty cycle (min) under free discharge max.:
2
Rotation speed (rpm):
2500
Type of construction:
IMB 5
Protection class:
IP 54
• Vane pump, with integral bypass • Barrel screw coupling, G 2‘‘ male, G 1“ male (19 524) • On/Off switch • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Filter strainer prevents dirt from being sucked up into the pump • Discharge hose, 4 m / 13,1 ft, DN 19, G 1“ male, G 1“ female (23 155 957) • Suction hose, 1,6 m / 5,2 ft, DN 25, G 1" male, G 1" female (23 156) • Foot valve with filter (19 890) • Universal control nozzle storage bracket (23 174) Features & Benefits • First class construction of electric machines and pumps • Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions • Switch case made of shock resistant, die-cast zinc, coated by cataphoresis • Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis • Motor case, completely galvanised, coated external parts • Small tolerances provide a high suction- and pressure performance • The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F
Materials of parts in contact with liquid
Packaging
Seals:
FKM (Viton®)
Packing unit:
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
Dimensions LxWxH (mm) / (inch):
280 x 120 x 120 / 11 x 4,7 x 4,7
Weight (kg) / (lb):
6,42 / 14,2
94
1,0
MOBIMAxx Industrial design 54 l/min / 14,3 gpm, 12 + 24 V DC
Item number Technical data
MOBIMAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
23 519 092
ABK-ZVAD-4 m
D
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176) Technical data
MOBIMAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
23 519 093
ABK-ZVAD-EBZM-4 m
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176) • In-line meter NUMERIxx³, three digits (23 192) Technical data
MOBIMAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
23 519 088
ABK-ZVAD-4 m
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176) Technical data
MOBIMAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
23 519 089
ABK-ZVAD-EBZM-4 m
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176) • In-line meter NUMERIxx³, three digits (23 192)
95
VANE PUMP SETS Mounted on base plate
Technical data
Specification • Vane pump, with integral bypass (23 430)
Connecting cable, length (m) / (ft):
2/7
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
60 / 15,8
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
• On/Off switch • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Pre-assembled on mounting plate (GPM) for wall and tankmounting • In-line meter NUMERIxx³, three digits (23 192) • Foot valve with filter (19 890) Features & Benefits • First class construction of electric machines and pumps • Designed for a long service life
Motor data
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
3
Power (kW):
0,6
• Motor and switch case made of shock resistant, die-cast aluminium
Insulation class:
F
• Continuous operation
Highest permissible limit temperature (°C) / (°F):
155 / 311
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
Torque (Nm):
1,27
Rotation speed (rpm):
3250
Type of construction:
IMB 3
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
1.4301
Vane:
POM
96
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance Packaging Packing unit:
1,0
Industrial design 60 l/min, 15,8 gpm
Item number Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
FZP 60 l/min230 V-1~AC-50 Hz
23 510 001
EUS-GPM-EBZM-ZVD-4 m
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957)
D
Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
FZP 60 l/min230 V-1~AC-50 Hz
23 510 398
EUS-GPM-EBZM-ZVD-6 m
• Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958)
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176)
FZP 60 l/min230 V-1~AC-50 Hz
23 510 390
EUS-GPM-EBZM-ZVAD-6 m
• Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958)
Specification • Automatic nozzle valve with German design approval and swivel, ZVABD (23 168)
FZP 60 l/min230 V-1~AC-50 Hz
23 510 951
EUS-GPM-EBZM-ZVABD-4 m
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957)
97
VANE PUMP SETS Mounted on base plate
Technical data
Specification • Vane pump, with integral bypass (23 430)
Connecting cable, length (m) / (ft):
2/7
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
60 / 15,8
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
• On/Off switch • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Pre-assembled on mounting plate (GPM) for wall and tankmounting • In-line meter NUMERIxx³, three digits (23 192) • Foot valve with filter (19 890) Features & Benefits • First class construction of electric machines and pumps • Designed for a long service life
Motor data
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
3
Power (kW):
0,6
• Motor and switch case made of shock resistant, die-cast aluminium
Insulation class:
F
• Continuous operation
Highest permissible limit temperature (°C) / (°F):
155 / 311
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
Torque (Nm):
1,27
Rotation speed (rpm):
3250
Type of construction:
IMB 3
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
1.4301
Vane:
POM
98
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance • The diesel exchange-filter filters out particles exeeding 30 µm and absorbs water up to a total volume of 130 ml. Packaging Packing unit:
1,0
Industrial design 60 l/min, 15,8 gpm
Item number Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
FZP 60 l/min230 V-1~AC-50 Hz
23 510 955
EUS-GPM-EBZM-F-ZVD-4 m
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957)
D
• Diesel-exchange filter, 30 µm (23 209)
Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
FZP 60 l/min230 V-1~AC-50 Hz
23 510 396
EUS-GPM-EBZM-F-ZVD-6 m
• Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958) • Diesel-exchange filter, 30 µm (23 209)
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176)
FZP 60 l/min230 V-1~AC-50 Hz
23 510 397
EUS-GPM-EBZM-F-ZVAD-6 m
• Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958) • Diesel-exchange filter, 30 µm (23 209)
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176)
FZP 60 l/min230 V-1~AC-50 Hz
23 510 447
EUS-GPM-EBZM-ZVAD-8 m
• Discharge hose, 8 m, DN 19, G 1“ male, G 1“ female (23 155 979) • Diesel-exchange filter, 30 µm (23 209)
99
VANE PUMP SETS Mounted on base plate
Technical data
Specification • Vane pump, with integral bypass (23 430)
Connecting cable, length (m) / (ft):
2/7
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
60 / 15,8
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
• On/Off switch • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Pre-assembled on mounting plate (GPM) for wall and tankmounting • In-line meter NUMERIxx³, three digits (23 192) • Foot valve with filter (19 890) Features & Benefits • First class construction of electric machines and pumps • Designed for a long service life
Motor data
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
3
Power (kW):
0,6
• Motor and switch case made of shock resistant, die-cast aluminium
Insulation class:
F
• Continuous operation
Highest permissible limit temperature (°C) / (°F):
155 / 311
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
Torque (Nm):
1,27
Rotation speed (rpm):
3250
Type of construction:
IMB 3
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
1.4301
Vane:
POM
100
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance • The diesel exchange-filter filters out particles exeeding 30 µm and absorbs water up to a total volume of 130 ml. Packaging Packing unit:
1,0
Industrial design 60 l/min, 15,8 gpm
Item number Specification • Automatic nozzle valve with German design approval and swivel, ZVABD (23 168)
FZP 60 l/min230 V-1~AC-50 Hz
23 510 957
EUS-GPM-EBZM-F-ZVABD-4 m
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957)
D
• Diesel-exchange filter, 30 µm (23 209)
101
VANE PUMP SETS Mounted on base plate
Technical data
Specification • Vane pump, with integral bypass (23 433)
Connecting cable, length (m) / (ft):
2/7
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
100 / 26,4
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
• On/Off switch • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Pre-assembled on mounting plate (GPM) for wall and tankmounting • In-line meter NUMERIxx³, three digits (23 192) • Foot valve with filter (19 890) Features & Benefits • First class construction of electric machines and pumps • Designed for a long service life
Motor data
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
5,7
Power (kW):
1,2
• Motor and switch case made of shock resistant, die-cast aluminium
Insulation class:
F
• Continuous operation
Highest permissible limit temperature (°C) / (°F):
155 / 311
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
Torque (Nm):
1,27
Rotation speed (rpm):
3250
Type of construction:
IMB 3
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
1.4301
Vane:
POM
102
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance Packaging Packing unit:
1,0
Industrial design 100 l/min, 26,4 gpm
Item number Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
FZP 100 l/min230 V-1~AC-50 Hz
23 511 001
EUS-GPM-EBZM-ZVD-4 m
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957)
D
Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
FZP 100 l/min230 V-1~AC-50 Hz
23 511 398
EUS-GPM-EBZM-ZVD-6 m
• Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958)
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176)
FZP 100 l/min230 V-1~AC-50 Hz
23 511 390
EUS-GPM-EBZM-ZVAD-6 m
• Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958)
Specification • Automatic nozzle valve with German design approval and swivel, ZVABD (23 168)
FZP 100 l/min230 V-1~AC-50 Hz
23 511 953
EUS-GPM-EBZM-ZVABD-4 m
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957)
103
VANE PUMP SETS Mounted on base plate
Technical data
Specification • Vane pump, with integral bypass (23 433)
Connecting cable, length (m) / (ft):
2/7
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
100 / 26,4
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
• On/Off switch • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Pre-assembled on mounting plate (GPM) for wall and tankmounting • In-line meter NUMERIxx³, three digits (23 192) • Foot valve with filter (19 890) Features & Benefits • First class construction of electric machines and pumps • Designed for a long service life
Motor data
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
5,7
Power (kW):
1,2
• Motor and switch case made of shock resistant, die-cast aluminium
Insulation class:
F
• Continuous operation
Highest permissible limit temperature (°C) / (°F):
155 / 311
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
Torque (Nm):
1,27
Rotation speed (rpm):
3250
Type of construction:
IMB 3
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
1.4301
Vane:
POM
104
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance • The diesel exchange-filter filters out particles exeeding 30 µm and absorbs water up to a total volume of 130 ml. Packaging Packing unit:
1,0
Industrial design 100 l/min, 26,4 gpm
Item number Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
FZP 60 l/min230 V-1~AC-50 Hz
23 511 955
EUS-GPM-EBZM-F-ZVD-4 m
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957)
D
• Diesel-exchange filter, 30 µm (23 209)
Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
FZP 100 l/min230 V-1~AC-50 Hz
23 511 392
EUS-GPM-EBZM-F-ZVD-6 m
• Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958) • Diesel-exchange filter, 30 µm (23 209)
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176)
FZP 100 l/min230 V-1~AC-50 Hz
23 511 393
EUS-GPM-EBZM-F-ZVAD-6 m
• Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958) • Diesel-exchange filter, 30 µm (23 209)
Specification • Automatic nozzle valve with German design approval and swivel, ZVABD (23 168)
FZP 100 l/min230 V-1~AC-50 Hz
23 511 959
EUS-GPM-EBZM-ZVAD-8 m
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957) • Diesel-exchange filter, 30 µm (23 209)
105
VANE PUMP SETS Mounted on base plate
Technical data
Specification • Vane pump, with integral bypass (23 430)
Connecting cable, length (m) / (ft):
2/7
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
60 / 15,8
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
• On/Off switch • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Pre-assembled on mounting plate (GPM) for wall and tankmounting • Diesel Management System (DMS) in aluminium housing (23 499) • In-line meter/pulse meter, IPG, digital (23 820) • Foot valve with filter (19 890) Features & Benefits • First class construction of electric machines and pumps
Motor data Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
3
Power (kW):
0,6
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
• Motor and switch case made of shock resistant, die-cast aluminium
155 / 311
Thermal protection:
self resetting
• Continuous operation
Duty cycle (min):
Continuous operation
Torque (Nm):
1,27
Rotation speed (rpm):
3250
Type of construction:
IMB 3
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
1.4301
Vane:
POM
106
• Designed for a long service life • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
• Suction hight 5m/16,4 ft • Small tolerances provide a high suction- and pressure performance • The diesel exchange-filter filters out particles exeeding 30 µm and absorbs water up to a total volume of 130 ml Packaging Packing unit:
1,0
Industrial design, 60 l/min, 15,8 gpm with Diesel management system
Item number Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
FZP 60 l/min230 V-1~AC-50 Hz
23 510 960
EUS-GPM-IPG-DMS-F-ZVAD-6 m
• Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958)
D
• Diesel-exchange filter, 30 µm (23 209)
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176)
FZP 60 l/min230 V-1~AC-50 Hz
23 510 961
EUS-GPM-IPG-DMS-F-ZVAD-4 m
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957) • Diesel-exchange filter, 30 µm (23 209)
107
VANE PUMP SETS Mounted on base plate
Technical data
Specification • Vane pump, with integral bypass (23 433)
Connecting cable, length (m) / (ft):
2/7
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge (l/min) / (gpm):
100 / 26,4
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Suction height (m) / (ft):
5 / 17
Pumping media:
fuel oil and diesel
• On/Off switch • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Pre-assembled on mounting plate (GPM) for wall and tankmounting • Diesel Management System (DMS) in aluminium housing (23 499) • In-line meter/pulse meter, IPG, digital (23 820) • Diesel-exchange filter, 30 µm (23 209) • Foot valve with filter (19 890) Features & Benefits
Motor data Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
5,7
Power (kW):
1,2
Insulation class:
F
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
Highest permissible limit temperature (°C) / (°F):
155 / 311
Thermal protection:
self resetting
• Motor and switch case made of shock resistant, die-cast aluminium
Duty cycle (min):
Continuous operation
Torque (Nm):
1,27
• Suction hight 5m/16,4 ft
Rotation speed (rpm):
3250
Type of construction:
IMB 3
• Small tolerances provide a high suction- and pressure performance
Protection class:
IP 54
• First class construction of electric machines and pumps • Designed for a long service life
• Continuous operation
• The diesel exchange-filter filters out particles exeeding 30 µm and absorbs water up to a total volume of 130 ml
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Packaging
Pump housing:
AlSi 12 (sea water resistant)
Packing unit:
Rotor:
1.4301
Vane:
POM
108
1,0
Industrial design, 100 l/min, 26,4 gpm with Diesel management system
Item number Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
FZP 100 l/min230 V-1~AC-50 Hz
23 511 960
EUS-GPM-IPG-DMS-F-ZVAD-6 m
• Discharge hose, 6 m, DN 19, G 1“ male, G 1“ female (23 155 958)
D
• Diesel-exchange filter, 30 µm (23 209)
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176)
FZP 100 l/min230 V-1~AC-50 Hz
23 511 961
EUS-GPM-IPG-DMS-F-ZVAD-4 m
• Discharge hose, 4 m, DN 19, G 1“ male, G 1“ female (23 155 957) • Diesel-exchange filter, 30 µm (23 209)
109
VANE PUMP SETS Mobile Sets
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge up to (l/min) / (gpm):
35 / 9,2
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,6 / 23,2
Pumping media:
fuel oil and diesel
Motor data Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
25 A plug-in fuse
Duty cycle (min) under free discharge max.:
180
Duty cycle (min) under free discharge max.:
2
Rotation speed (rpm):
3000
Type of construction:
IMB 5
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
110
• Vane pump, with integral bypass • On/Off switch • Fuse • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Discharge hose, 4 m / 13,1 ft, DN 19, G 1“ male, G 1“ female (23 155 957) • Suction hose, 1,6 m /5,2 ft, DN 25, G 1" male, G 1" female (23 156) • Foot valve with filter (19 890) • Installation Flowmeter NUMERIxx³, three digit, possible (23 192) Features & Benefits • First class construction of electric machines and pumps • Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions • Switch case made of shock resistant, die-cast zinc, coated by cataphoresis • Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis • Motor case, completely galvanised, coated external parts • Small tolerances provide a high suction- and pressure performance • The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F Packaging Packing unit:
1,0
MOBIFIxx Industrial design 35 l/min / 9,2 gpm, 12 + 24 V DC
Item number Technical data
MOBIFIxx 35 l/min9,2 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
19
Power (W):
230
Torque (Nm):
0,38
23 517
ABK-ZVD-4 m
D
Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
Technical data
MOBIFIxx 35 l/min9,2 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
11
Power (W):
270
Torque (Nm):
0,6
23 517 824
ABK-ZVD-4 m
Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
Technical data
MOBIFIxx 35 l/min9,2 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
19
Power (W):
230
Torque (Nm):
0,38
23 517 100
ABK-ZVABD-4 m
Specification • Automatic nozzle valve with German design approval and swivel, ZVABD (23 168)
Technical data
MOBIFIxx 35 l/min9,2 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
11
Power (W):
270
Torque (Nm):
0,6
23 517 825
ABK-ZVABD-4 m
Specification • Automatic nozzle valve with German design approval and swivel, ZVABD (23 168)
111
VANE PUMP SETS Mobile Sets
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ female
Connection discharge side:
G 1‘‘ female
Hydraulic data Pump design:
vane pump, selfpriming
Delivery rate under free discharge up to (l/min) / (gpm):
54 / 14,3
Suction height up to (m) / (ft):
3 / 10
Discharge pressure up to (bar) / (psi):
1,8 / 26,1
Pumping media:
fuel oil and diesel
Motor data Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Fuse:
25 A plug-in fuse
Duty cycle (min) under free discharge max.:
180
Duty cycle (min) under free discharge max.:
2
Rotation speed (rpm):
2500
Type of construction:
IMB 5
Protection class:
IP 54
Materials of parts in contact with liquid Seals:
FKM (Viton®)
Pump housing:
AlSi 12 (sea water resistant)
Rotor:
GG 25
Vane:
POM
112
• Vane pump, with integral bypass • On/Off switch • Fuse • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active • Discharge hose, 4 m / 13,1 ft, DN 19, G 1“ male, G 1“ female (23 155 957) • Suction hose, 1,6 m /5,2 ft, DN 25, G 1" male, G 1" female (23 156) • Foot valve with filter (19 890) • Installation Flowmeter NUMERIxx³, three digit, possible (23 192) Features & Benefits • First class construction of electric machines and pumps • Continuous operation - 3 hours - with open valve • Lapped shaft on the sealing point • Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Pump case freely positionable in all 90° positions • Switch case freely positionable in all 90° positions • Switch case made of shock resistant, die-cast zinc, coated by cataphoresis • Pump case made of seawater resistant, die-cast aluminium, coated by cataphoresis • Motor case, completely galvanised, coated external parts • Small tolerances provide a high suction- and pressure performance • The material composition of the vane-stator (runner ring) guarantees form-stability of the vanes up to 200 °C / 392 °F Packaging Packing unit:
1,0
MOBIMAxx Industrial design 54 l/min / 14,3 gpm, 12 + 24 V DC
Item number Technical data
MOBIMAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
30
Power (W):
360
Torque (Nm):
0,66
23 519
ABK-ZVD-4 m
D
Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
Technical data
MOBIMAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
21
Power (W):
500
Torque (Nm):
0,8
23 519 824
ABK-ZVD-4 m
Specification • Control gun for diesel with rotating swivel, ZVD (23 171)
Technical data
MOBIMAxx 54 l/min14,3 gpm-12 V-DC
Voltage (V):
12 V DC
Power consumption (A):
19
Power (W):
230
Torque (Nm):
0,38
23 519 100
ABK-ZVABD-4 m
Specification • Automatic nozzle valve with German design approval and swivel, ZVABD (23 168)
Technical data
MOBIMAxx 54 l/min14,3 gpm-24 V-DC
Voltage (V):
24 V DC
Power consumption (A):
11
Power (W):
270
Torque (Nm):
0,6
23 519 825
ABK-ZVABD-4 m
Specification • Automatic nozzle valve with German design approval and swivel, ZVABD (23 168)
113
VANE PUMP SETS
Technical data
Specification
Flow rate filter (l/min):
28
• Mobile trolley with parking brake
Flow rate filter (gal/min):
7,4
• Vane pump with integrated bypass (23 404)
Filter medium:
Diesel
• In-line meter NUMERIxx³, digital (23 190)
Residual water content (ppm):
200
Battery voltage (V):
12
• Reel for diesel fuel and fuel oil hoses (29 341)
Mesh width (µm):
30
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
Total amount of absorbed water in the filter (ml):
1300
Dimensions LxWxH (mm):
700 x 460 x 1550
• Telescopic suction tube with barrel screw coupling (23 177)
Weight (kg):
91,5
• 55 Ah battery delivers sufficient power to filter approx. 2,000 l of diesel fuel
• Water filter 30 µm (80 828)
• Suction tube with barrel screw coupling
Features & Benefits • Residual water content < 200 ppm • Mobile filter system • Separated water can be directly discharged via valve Packaging Packing unit:
114
1,0
Filter systems for diesel
Item number Filter system for diesel
23 805
with water separator < 200 ppm
D
115
VANE PUMP SETS
Technical data
Specification
Flow rate max. (l/min):
28
• Filter system in cast steel housing
Mesh width (µm):
30
• Drain valve
Connections:
M33 x 2 Features & Benefits
Water absorption capacity (l):
1,3
Medium:
Diesel fuels
Temperature range (°C):
-40 / +80
Dimensions LxWxH (mm):
300 x 220 x 500
Dimensions LxWxH (inch):
11.81 x 8.66 x 19.69
116
• High filtration efficiency • Very low pressure loss • Minimum maintenance Packaging Weight (kg):
13,8
Packing unit:
1,0
Filter systems for diesel
Item number Water separator for Diesel filter
80 828
â&#x2030;¤ 200 ppm water
D
117
AXIAL ROTATION PUMP SETS
technic that leads
118
outperformed + outlast
E
119
AXIAL ROTATION PUMP SETS
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
• For 200 up to 1000 l container 2 / 6,6
• Axial wheel pump with manual pump assembly
Connection container:
G 2“ male, drum adapter
• Illuminated on/off switch
Connection discharge side:
G 1‘‘ male
• Motor with thermal protection switch, self resetting • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
axial gear
Delivery rate under free discharge (l/min) / (gpm):
38 / 10
• Discharge hose, 4 m / 13,1 ft, DN 19, G1" male, G1" female (23 144) • Suction hose, 1,6 m / 1,6 ft, with brass strainer (87 842)
Suction height up to (m) / (ft):
2 / 6,6
Discharge height max. (m) / (ft):
15 / 49,2
• Valuable sales package
Pumping media:
fuel oil and diesel
Features & Benefits
• Drum adapter, PA, G 2‘‘ male
Motor data
• The pump is lightweight and very quiet in operation.
Thermal protection:
self resetting
Voltage (V):
12 V DC
Power consumption (A):
14
Power (kW):
0,18
• The liquid level can be lifted to operation level by manual pumping
Duty cycle (min):
30
• Can be manually operated in case of electric power blackout
Rotation speed (rpm):
7500 rpm/min at 0,5 bar antipressure
Type of construction:
IMB 5
Protection class:
IP 44
• Replace the carbons when the pump has delivered a volume of 100,000 l
Material of pump housing and pump:
PA6
Packaging
120
• Resistant against small dirt particles in the liquid to be discharged
• Pump can only be utilized as barrel pump
Dimensions LxWxH (mm) / (inch):
400 x 400 x 220 / 15,7 x 15,7 x 8,7
Packing unit:
1,0
PREMAxx 38 l/min, 10 gpm-12 V DC
Item number PREMAxx 38 l/min-10 gpm
Specification • Polypropylene nozzle valve, ZVPP (23 161)
23 711
12 V-DC-ABK-ZVPP-4 m
Packaging • Weight (kg) / (lb):
5,31 / 11,7
E
PREMAxx 38 l/min-10 gpm
Specification • Automatic nozzle valve with German design approval and swivel, ZVABD (23 168)
23 714
12 V-DC-ABK-ZVABD-4 m
Packaging • Weight (kg) / (lb):
6,26 / 13,8
PREMAxx 38 l/min-10 gpm
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176)
23 717
12 V-DC-ABK-ZVAD-4 m
Packaging • Weight (kg) / (lb):
5,52 / 12,2
121
AXIAL ROTATION PUMP SETS
Technical data
Specification
Connecting cable with battery terminal clips, length (m) / (ft):
• For 200 up to 1000 l container 2 / 6,6
• Axial wheel pump with manual pump assembly
Connection container:
G 2“ male, drum adapter
• Illuminated on/off switch
Connection discharge side:
G 1‘‘ male
• Motor with thermal protection switch, self resetting • Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
axial gear
Delivery rate under free discharge (l/min) / (gpm):
43 / 11,4
• Discharge hose, 4 m / 13,1 ft, DN 19, G1" male, G1" female (23 144) • Suction hose, 1,6 m / 5,2 ft, with brass strainer (87 842)
Suction height up to (m) / (ft):
2 / 6,6
Discharge height max. (m) / (ft):
15 / 49,2
• Valuable sales package
Pumping media:
fuel oil and diesel
Features & Benefits
• Drum adapter, PA, G 2‘‘ male
Motor data
• The pump is lightweight and very quiet in operation.
Thermal protection:
self resetting
Voltage (V):
24 V DC
Power consumption (A):
10
Power (kW):
0,24
• The liquid level can be lifted to operation level by manual pumping
Duty cycle (min):
30
• Can be manually operated in case of electric power blackout
Rotation speed (rpm):
7800 rpm/min at 0,5 bar antipressure
Type of construction:
IMB 5
Protection class:
IP 44
• Replace the carbons when the pump has delivered a volume of 100,000 l
Material of pump housing and pump:
PA6
Packaging
122
• Resistant against small dirt particles in the liquid to be discharged
• Pump can only be utilized as barrel pump
Dimensions LxWxH (mm) / (inch):
400 x 400 x 220 / 15,7 x 15,7 x 8,7
Packing unit:
1,0
PREMAxx 43 l/min, 11,4 gpm-24 V DC
Item number PREMAxx 43 l/min-11,4 gpm
Specification • Polypropylene nozzle valve, ZVPP (23 161)
23 721
24 V-DC-ABK-ZVPP-4 m
Packaging • Weight (kg) / (lb):
5,31 / 11,7
E
PREMAxx 43 l/min-11,4 gpm
Specification • Automatic nozzle valve with German design approval and swivel, ZVABD (23 168)
23 724
24 V-DC-ABK-ZVABD-4 m
Packaging • Weight (kg) / (lb):
4,7 / 10,4
PREMAxx 43 l/min-11,4 gpm
Specification • Automatic nozzle valve with swivel joint, ZVAD (23 176)
23 727
24 V-DC-ABK-ZVAD-4 m
Packaging • Weight (kg) / (lb):
5,52 / 12,2
123
AXIAL ROTATION PUMP SETS
Technical data
Specification
Connecting cable with Euro two-pin plug, length (m) / (ft):
• For 200 up to 1000 l container 2 / 6,6
Connection container:
G 2“ male, drum adapter
• Illuminated on/off switch
Connection discharge side:
G 1‘‘ male
• Motor with thermal protection switch, self resetting
• Axial wheel pump with manual pump assembly
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
axial gear
Delivery rate under free discharge (l/min) / (gpm):
52 / 13,7
• Discharge hose, 4 m / 13,1 ft, DN 19, G1" male, G1" female (23 144) • Suction hose, 1,6 m / 5,2 ft, with brass strainer (87 842)
Suction height up to (m) / (ft):
2,5 / 8,2
Discharge height max. (m) / (ft):
15 / 49,2
• Valuable sales package
Pumping media:
fuel oil and diesel
Features & Benefits
• Drum adapter, PA, G 2‘‘ male
Motor data
• The pump is lightweight and very quiet in operation.
Thermal protection:
self resetting
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
1,8
• The liquid level can be lifted to operation level by manual pumping
Power (kW):
0,32
• Can be manually operated in case of electric power blackout
Duty cycle (min):
30
Rotation speed (rpm):
7500 rpm/min at 0,5 bar antipressure
Type of construction:
IMB 5
Protection class:
IP 34
Material of pump housing and pump:
124
• Resistant against small dirt particles in the liquid to be discharged
• Pump can only be utilized as barrel pump • Replace the carbons when the pump has delivered a volume of 100,000 l Packaging
PA6
Dimensions LxWxH (mm) / (inch):
400 x 400 x 220 / 15,7 x 15,7 x 8,7
Packing unit:
1,0
PREMAxx 52 l/min, 230 V, EU-plug
Item number Specification
PREMAxx 52 l/min
• Polypropylene nozzle valve, ZVPP (23 161)
23 731
230 V-1~AC-50 Hz-EUSZVPP-4 m
Packaging • Weight (kg) / (lb):
5,31 / 11,7
E
Specification
PREMAxx 52 l/min
• Automatic nozzle valve with German design approval and swivel, ZVABD (23 168)
23 734
230 V-1~AC-50 Hz-EUSZVABD-4 m
Packaging • Weight (kg) / (lb):
5,4 / 11,9
Specification
PREMAxx 52 l/min
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
23 737
230 V-1~AC-50 Hz-EUSZVAD-4 m
Packaging • Weight (kg) / (lb):
5,4 / 11,9
125
AXIAL ROTATION PUMP SETS
Technical data
Specification • For 200 up to 1000 l container
Connecting cable with GB-plug, length (m) / (ft):
2 / 6,6
Connection container:
G 2“ male, drum adapter
Connection discharge side:
G 1‘‘ male
Hydraulic data
• Axial wheel pump with manual pump assembly • Illuminated on/off switch • Motor with thermal protection switch, self resetting
Pump design:
axial gear
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Delivery rate under free discharge (l/min) / (gpm):
52 / 13,7
• Discharge hose, 4 m / 13,1 ft, DN 19, G1" male, G1" female (23 144)
Suction height up to (m) / (ft):
2,5 / 8,2
• Suction hose, 1,6 m / 5,2 ft, with brass strainer (87 842)
Discharge height max. (m) / (ft):
15 / 49,2
• Drum adapter, PA, G 2‘‘ male
Pumping media:
fuel oil and diesel
• Valuable sales package Features & Benefits
Motor data Thermal protection:
self resetting
• The pump is lightweight and very quiet in operation.
Voltage (V):
230
Frequency (Hz):
50
• Resistant against small dirt particles in the liquid to be discharged
Power consumption (A):
1,8
Power (kW):
0,32
Duty cycle (min):
30
• Can be manually operated in case of electric power blackout
Rotation speed (rpm):
7500 rpm/min at 0,5 bar antipressure
• Pump can only be utilized as barrel pump
Type of construction:
IMB 5
Protection class:
IP 44
Material of pump housing and pump:
PA6
126
• The liquid level can be lifted to operation level by manual pumping
• Replace the carbons when the pump has delivered a volume of 100,000 l Packaging Dimensions LxWxH (mm) / (inch):
400 x 400 x 220 / 15,7 x 15,7 x 8,7
Packing unit:
1,0
PREMAxx 52 l/min, 230 V, GB-plug
Item number Specification
PREMAxx 52 l/min
• Polypropylene nozzle valve, ZVPP (23 161)
23 731 932
230 V-1~AC-50 Hz-GBSZVPP-4 m
Packaging • Weight (kg) / (lb):
5,04 / 11,1
E
Specification
PREMAxx 52 l/min
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
23 737 932
230 V-1~AC-50 Hz-GBSZVAD-4 m
Packaging • Weight (kg) / (lb):
5,68 / 12,5
127
AXIAL ROTATION PUMP SETS
Technical data
Specification • For 200 up to 1000 l container
Connecting cable with Swiss plug, length (m) / (ft):
2 / 6,6
Connection container:
G 2“ male, drum adapter
Connection discharge side:
G 1‘‘ male
Hydraulic data
• Axial wheel pump with manual pump assembly • Illuminated on/off switch • Motor with thermal protection switch, self resetting
Pump design:
axial gear
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Delivery rate under free discharge (l/min) / (gpm):
52 / 13,7
• Discharge hose, 4 m / 13,1 ft, DN 19, G1" male, G1" female (23 144)
Suction height up to (m) / (ft):
2,5 / 8,2
• Suction hose, 1,6 m / 5,2 ft, with brass strainer (87 842)
Discharge height max. (m) / (ft):
15 / 49,2
• Drum adapter, PA, G 2‘‘ male
Pumping media:
fuel oil and diesel
• Valuable sales package Features & Benefits
Motor data Thermal protection:
self resetting
• The pump is lightweight and very quiet in operation.
Voltage (V):
230
Frequency (Hz):
50
• Resistant against small dirt particles in the liquid to be discharged
Power consumption (A):
1,8
Power (kW):
0,32
Duty cycle (min):
30
• Can be manually operated in case of electric power blackout
Rotation speed (rpm):
7500 rpm/min at 0,5 bar antipressure
• Pump can only be utilized as barrel pump
Type of construction:
IMB 5
Protection class:
IP 44
Material of pump housing and pump:
PA6
128
• The liquid level can be lifted to operation level by manual pumping
• Replace the carbons when the pump has delivered a volume of 100,000 l Packaging Dimensions LxWxH (mm) / (inch):
400 x 400 x 220 / 15,7 x 15,7 x 8,7
Packing unit:
1,0
PREMAxx 52 l/min, 230 V, CH-plug
Item number Specification
PREMAxx 52 l/min
• Polypropylene nozzle valve, ZVPP (23 161)
23 731 939
230 V-1~AC-50 Hz-CHSZVPP-4 m
Packaging • Weight (kg) / (lb):
4,5 / 9,9
E
Specification
PREMAxx 52 l/min
• Automatic nozzle valve with swivel joint, ZVAD (23 176)
23 737 939
230 V-1~AC-50 Hz-CHSZVAD-4 m
Packaging • Weight (kg) / (lb):
5,4 / 11,9
129
AXIAL ROTATION PUMP SETS
Technical data
Specification
Connecting cable with Euro two-pin plug, length (m) / (ft):
• For 200 up to 1000 l container 2 / 6,6
Connection container:
G 2“ male, drum adapter
• Illuminated on/off switch
Connection discharge side:
G 1‘‘ male
• Motor with thermal protection switch, self resetting
• Axial wheel pump with manual pump assembly
• Siphon protection acc. to WHG (German government regulation for environmental care), continuously active
Hydraulic data Pump design:
axial gear
Delivery rate under free discharge (l/min) / (gpm):
52 / 13,7
• Drum adapter, PA, G 2‘‘ male
Suction height up to (m) / (ft):
2,5 / 8,2
• Valuable sales package
Discharge height max. (m) / (ft):
15 / 49,2
Features & Benefits
Pumping media:
AdBlue®
• The pump is lightweight and very quiet in operation.
• Discharge hose, 4 m / 13,1 ft, DN 19, G1" male, G1" female
• Resistant against small dirt particles in the liquid to be discharged
Motor data Thermal protection:
self resetting
Voltage (V):
230
• The liquid level can be lifted to operation level by manual pumping
Frequency (Hz):
50
• Can be manually operated in case of electric power blackout
Power consumption (A):
1,8
Power (kW):
0,32
Duty cycle (min):
30
Rotation speed (rpm):
7500 rpm/min at 0,5 bar antipressure
Type of construction:
IMB 5
Protection class:
IP 34
Material of pump housing and pump:
PP
130
• Pump can only be utilized as barrel pump • Replace the carbons when the pump has delivered a volume of 100,000 l Packaging Dimensions LxWxH (mm) / (inch):
400 x 400 x 220 / 15,7 x 15,7 x 8,7
Packing unit:
1,0
PREMAxx 52 l/min, 230 V, for AdBlue®
Item number Specification
PREMAxx 52 l/min
• Mechanical control nozzle for urea with swivel (ZVMUD) (23 161 878)
23 740
230 V-1~AC-50 Hz-EUSZVMUD-4 m
• SEC-Adapter für IBC-Behälter (83 324) + IBC-Adapter für Ad Blue (83 520) Packaging • Weight (kg) / (lb):
5,31 / 11,7
E
Specification
PREMAxx 52 l/min
• Mechanical control nozzle for urea with swivel (ZVMUD) (23 161 878)
23 741
230 V-1~AC-50 Hz-EUSZVMUD-4 m
• Suction hose, 1,6 m, with foot valve and filter Packaging • Weight (kg) / (lb):
5 / 11
Specification
PREMAxx 52 l/min
• Mechanical control nozzle for urea with swivel (ZVMUD) (23 161 878)
23 742
230 V-1~AC-50 Hz-EUSZVMUD-4 m
• In-line meter, digital, for urea (EBZDU) (23 287 870) • Suction hose, 1,6 m, with foot valve and filter Packaging • Weight (kg) / (lb):
5 / 11
131
UREA PUMP SETS AdBlue速
technic that leads
132
outperformed + outlast
F
133
UREA PUMP SETS AdBlue速
134
F
135
UREA PUMP SETS AdBlue速
136
F
137
UREA PUMP SETS AdBlue®
Technical data
Specification • Urea electrical diaphragm pump with integrated bypass
Connecting cable, Length (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ male
Connection discharge side:
G 1‘‘ male
Hydraulic data
• On/Off switch • Base plate for mounting barrel (82 883) • Control nozzle storage bracket (85 036) • Discharge hose, 6 m / 19,7 ft, DN 19 (25 191)
Pump design:
Diaphragm pump, self-priming
Delivery rate under free discharge (l/min) / (gpm):
35 / 9,2
• Suction hose, 2 m / 6,6 ft, DN 19 (25 190) • Foot valve with filter (23 200)
Suction height up to (m) / (ft):
3 / 9,8
Discharge pressure up to (bar) / (psi):
1,7 / 24,6
Pumping media:
AdBlue®, water
• Designed for a long service life
Insulation class:
F
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
Highest permissible limit temperature (°C) / (°F):
155 / 311
• Motor and switch case made of shock resistant, die-cast aluminium
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
1,5
Power (kW):
0,36
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation – a real endurance runner
Dimensions LxWxH (mm) / (inch):
700 x 455 x 330 / 27,6 x 17,9 x 13
Rotation speed (rpm):
2800
Packing unit:
1,0
Type of construction:
IMB 3
Protection class:
IP 54
Motor data
Materials of parts in contact with liquid Membran and Seals:
EPDM / FKM
Pump housing:
PP
Dimensions LxWxH (mm) / (inch):
310 x 180 x 160 / 12,2 x 7,1 x 6,3
Weight (kg) / (lb):
6,86 / 15,2
138
Features & Benefits • First class construction of electric machines and pumps
• Continuous operation – a real endurance runner • Suction hight 3 m / 9,8 ft Packaging
Urea pump sets for barrel mounting mounted on base plate
Item number Urea-EMP-35 l/min230 V-1~AC
Specification • Mechanical control nozzle for urea with swivel (ZVMUD) (23 161 878)
25 223 001
ZVMUD-GPM
Packaging • Weight (kg) / (lb):
12,1 / 26,7
F Urea-EMP-35 l/min230 V-1~AC
Specification • Automatic nozzle for urea with swivel (ZVAUD) (23 171 960)
25 224 001
ZVAUD--GPM
Packaging • Weight (kg) / (lb):
14,4 / 31,7
Urea-EMP-35 l/min230 V-1~AC
Specification • Automatic nozzle for urea with swivel (ZVAUD) (23 171 960)
25 225 001
ZVAUD-EBZDU-GPM
• In-line meter-digital, turbine wheel, for urea (EBZDU) (23 295 870) Packaging • Weight (kg) / (lb):
15,4 / 34
139
UREA PUMP SETS AdBlue®
Technical data
Specification • Urea electrical diaphragm pump with integrated bypass
Connecting cable, Length (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ male
Connection discharge side:
G 1‘‘ male
Hydraulic data
• Discharge hose, 6 m / 19,7 ft, DN 19 (25 191) • Suction hose, 2 m / 6,6 ft, DN 19 (25 190) • Foot valve with filter (23 200)
Pump design:
Diaphragm pump, self-priming
Delivery rate under free discharge (l/min) / (gpm):
35 / 9,2
Suction height up to (m) / (ft):
3 / 9,8
Discharge pressure up to (bar) / (psi):
1,7 / 24,6
Pumping media:
AdBlue®, water
Features & Benefits • First class construction of electric machines and pumps • Designed for a long service life
Motor data Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
1,5
Power (kW):
0,36
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation – a real endurance runner
Rotation speed (rpm):
2800
Type of construction:
IMB 3
Protection class:
IP 54
Materials of parts in contact with liquid Membran and Seals:
EPDM / FKM
Pump housing:
PP
Dimensions LxWxH (mm) / (inch):
310 x 180 x 160 / 12,2 x 7,1 x 6,3
Weight (kg) / (lb):
6,86 / 15,2
140
• On/Off switch
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Motor and switch case made of shock resistant, die-cast aluminium • Continuous operation – a real endurance runner • Suction hight 3 m / 9,8 ft Packaging Dimensions LxWxH (mm) / (inch):
430 x 415 x 300 / 16,9 x 16,3 x 11,8
Packing unit:
1,0
Urea pump sets for barrel mounting
Item number Urea-EMP-35 l/min230 V-1~AC
Specification • Mechanical control nozzle for urea with swivel (ZVMUD) (23 161 878)
25 233 001
ZVMUD
Packaging • Weight (kg) / (lb):
10,8 / 23,8
F Urea-EMP-35 l/min230 V-1~AC
Specification • Automatic nozzle for urea with swivel (ZVAUD) (23 171 960)
25 234 001
ZVAUD
Packaging • Weight (kg) / (lb):
12,3 / 27,1
Urea-EMP-35 l/min230 V-1~AC
Specification • Automatic nozzle for urea with swivel (ZVAUD) (23 171 960)
25 235 001
ZVAUD-EBZDU
• In-line meter-digital, turbine wheel, for urea (EBZDU) (23 295 870) Packaging • Weight (kg) / (lb):
14,1 / 31
141
UREA PUMP SETS AdBlue®
Technical data
Specification • Urea electrical diaphragm pump with integrated bypass
Connecting cable, Length (m) / (ft):
3 / 10
Connection suction side:
G 1‘‘ male
Connection discharge side:
G 1‘‘ male
Hydraulic data
• On/Off switch • Mounting plate for IBC-container (82 831) • Control nozzle storage bracket (85 036) • Discharge hose, 6 m / 19,7 ft, DN 19 (25 191)
Pump design:
Diaphragm pump, self-priming
Delivery rate under free discharge (l/min) / (gpm):
35 / 9,2
• SEC adapter for IBC (83 324)
Suction height up to (m) / (ft):
3 / 9,8
• Foot valve with filter (23 200)
Discharge pressure up to (bar) / (psi):
1,7 / 24,6
Features & Benefits
Pumping media:
AdBlue®, water
• First class construction of electric machines and pumps
• Suction hose, 2 m / 6,6 ft, DN 19 (25 190)
• Designed for a long service life
Motor data
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
1,5
Power (kW):
0,36
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation – a real endurance runner
Rotation speed (rpm):
2800
Dimensions LxWxH (mm) / (inch):
430 x 415 x 300 / 16,9 x 16,3 x 11,8
Type of construction:
IMB 3
Protection class:
IP 54
Packing unit:
1,0
Materials of parts in contact with liquid Membran and Seals:
EPDM / FKM
Pump housing:
PP
Dimensions LxWxH (mm) / (inch):
310 x 180 x 160 / 12,2 x 7,1 x 6,3
Weight (kg) / (lb):
6,86 / 15,2
142
• Motor and switch case made of shock resistant, die-cast aluminium • Continuous operation – a real endurance runner • Suction hight 3 m / 9,8 ft Packaging
Urea pump sets for mounting on IBC containers
Item number Urea-EMP-35 l/min230 V-1~AC
Specification • Mechanical control nozzle for urea with swivel (ZVMUD) (23 161 878)
25 226 001
ZVMUD-SEC adapter-GPM
Packaging • Weight (kg) / (lb):
12,7 / 28
F Urea-EMP-35 l/min230 V-1~AC
Specification • Automatic nozzle for urea with swivel (ZVAUD) (23 171 960)
25 227 001
ZVAUD-SEC adapter-GPM
Packaging • Weight (kg) / (lb):
14,2 / 31,3
Urea-EMP-35 l/min230 V-1~AC
Specification • Automatic nozzle for urea with swivel (ZVAUD) (23 171 960)
25 228 001
ZVAUD-EBZDU
• In-line meter-digital, turbine wheel, for urea (EBZDU) (23 295 870) Packaging • Weight (kg) / (lb):
15,2 / 33,5
143
UREA PUMP SETS AdBlue®
Technical data
Specification • Urea electrical diaphragm pump with integrated bypass
Connecting cable, Length (m) / (ft):
1,8 / 5,9
Connection suction side:
G 1‘‘ male
Connection discharge side:
G 1‘‘ male
Hydraulic data
• On/Off switch • Control nozzle storage bracket • Discharge hose, 6 m, DN 19 (25 191) • Suction hose, 2 m, DN 19 (25 190)
Pump design:
Diaphragm pump, self-priming
Delivery rate under free discharge (l/min) / (gpm):
35 / 9,2
• Automatic nozzle for urea with swivel (ZVAUD) (23 171 960)
Suction height up to (m) / (ft):
3 / 9,8
• In-line meter-digital, turbine wheel, for urea (EBZDU) (23 295 870)
Discharge pressure up to (bar) / (psi):
1,6 / 27
Features & Benefits
Pumping media:
AdBlue®, water
Motor data
• SEC adapter for IBC (83 324)
• Standard filter cartridge easily replaceable • System can be operated without filter cartridge
Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
• Designed for a long service life
Thermal protection:
self resetting
• First class construction of electric machines and pumps
Duty cycle (min):
Continuous operation
Type of construction:
IMB 3
Protection class:
IP 54
• Encapsulation of the electric motor, which, in case of extreme temperature fluctuations, largely prevents the formation of condensed water and of short-circuits resulting thereof • Motor and switch case made of shock resistant, die-cast aluminium
Filter Separation efficiency (μ):
50
Filter surface (cm²):
190
Materials of parts in contact with liquid Diaphragm and sealings:
EPDM / FKM
Pump housing:
PP
Dimensions LxWxH (mm) / (inch):
310 x 180 x 160 / 12,2 x 7,1 x 6,3
Weight (kg) / (lb):
13,84 / 30,5
144
• Continuous operation – a real endurance runner
• For direct attachment to IBC containers by retaining tabs Packaging Packing unit:
1,0
Urea pump sets with filter for mounting on IBC containers
Item number Technical data
Urea-EMP-35 l/min230 V-1~AC
Voltage (V):
120
Frequency (Hz):
60
Power consumption (A):
2,8
Power (W):
320
Rotation speed (rpm):
3450
25 236
ZVAUD-SEC-adapter-EBZDU-F-96 mm
Specification
F
• Filter unit (25 180) • Filtering candle (25 185) replaceable through screw-on filter cap
145
UREA PUMP SETS AdBlue®
Technical data
Specification • Urea electrical diaphragm pump with integrated bypass
Connecting cable, Length (m) / (ft):
1,8 / 5,9
Connection suction side:
G 1‘‘ male
Connection discharge side:
G 1‘‘ male
Hydraulic data
• For 200/220 l container • Suction hose, 2 m, DN 19 (25 190) • Discharge hose, 6 m, DN 19 (25 191)
Pump design:
Diaphragm pump, self-priming
Delivery rate under free discharge (l/min) / (gpm):
35 / 9,2
Suction height up to (m) / (ft):
3 / 9,8
Discharge pressure up to (bar) / (psi):
1,6 / 27
Pumping media:
AdBlue®, water
Motor data Insulation class:
F
Highest permissible limit temperature (°C) / (°F):
155 / 311
Thermal protection:
self resetting
Duty cycle (min):
Continuous operation
Type of construction:
IMB 3
Protection class:
IP 54
Filter Separation efficiency (μ):
50
Filter surface (cm²):
190
Materials of parts in contact with liquid Diaphragm and sealings:
EPDM / FKM
Pump housing:
PP
Trolley load (kg):
200
146
• Urea supply system, mobile
• Barrel screw coupling, for plastic container, connecting thread G 2" and Tri-sure 1" PM (13 080 390) • Foot valve with filter (23 200) • Trolley, high quality, easy to handle and quiet running (17 009 100) Packaging Dimensions LxWxH (mm):
870 x 610 x 1000
Packing unit:
1,0
Urea systems
Item number Urea supply systemmobile
Specification • Mechanical control nozzle for urea with swivel (ZVMUD) (23 161 878)
25 333
EMP-35 l/min-230 V-ZVMUD
Packaging • Weight including package (kg):
46,5
F
Urea supply systemmobile
Specification • Automatic nozzle for urea with swivel (ZVAUD) (23 171 960)
25 334
EMP-35 l/min-230 V-ZVAUD
Packaging • Weight including package (kg):
48
147
UREA ACCESSORIES AdBlue® Urea nozzle valves
Item number 23 161 878
Mechanical nozzle valve-urea
Technical data
G 1“ female-80 l/min
Connecting thread:
G 1‘‘ male with hose liner, NW 19
Flow capacity max. (l/min) / (gpm):
80 / 21,1
Outside diameter discharge tube (mm):
18
Switch-off:
manually
Working pressure (bar)/ (psi):
0,5-4 / 7,3-58
Operating pressure max. (bar) / (psi):
4 / 58
Weight (kg) / (lb):
0,2 / 0,44
Specification • Mechanical control nozzle for urea with swivel
23 171 960
Automaticnozzle valve-urea
Technical data
G 1‘‘ female-60 l/minstainless steel
Connecting thread:
G 1‘‘ female, swivel
Flow capacity max. (l/min) / (gpm):
60 / 15,6
Outside diameter discharge tube (mm):
22
Switch-off:
automatic
Materials of parts in contact with liquid Casing:
stainless steel
Seals:
FKM (Viton®)
Auslaufrohr:
stainless steel
Dimensions LxWxH (mm) / (inch):
400 x 175 x 60 / 15,7 x 6,9 x 2,4
Weight (kg) / (lb):
0,77 / 1,7
Specification • Automatic nozzle valve for urea with swivel • Packed in carton box
148
UREA ACCESSORIES AdBlue® Urea built-in counter
Item number Technical data
Digital in-line meter
Connection 1:
G 1‘‘ male
Connection 2:
G 1‘‘ female
Medium:
AdBlue®
Flow capacity (l/min):
10 - 55
Temperature range (°C):
-10 +60
Max. pressure (bar):
2
Burst pressure (bar):
4
Housing material:
POM
Display:
4-digits, with 2 decimal digits
Partial summation:
9 different part sums individually callable, each part sum can be reset to zero
Total summation:
is counted in litres and at 99 999 l start at zero, with 1 decimal digit
Measuring tolerance (%):
±1%
Metering unit:
can be easily calibrated (set to PREMAxx at factory)
Installation position:
optional in 90° steps
Batteries:
Lithium SeZe AA, 3,6 V
Dimensions LxWxH (mm) / (inch):
120 x 110 x 60 / 4,7 x 4,3 x 2,4
Weight (kg) / (lb):
0,39 / 0,86
23 287 870
vane-G 1‘‘ i-G 1‘‘ a-urea
F
Specification • Can not be calibrated for public sales (NEF) • Packed in carton box • With bar code
149
UREA ACCESSORIES AdBlue® Urea built-in counter
Item number 23 823
Pulse meterG 1“ fem-G 1“ fem-urea
Technical data
oval gear meter-stainl. steel
Distance in-/out flange (mm):
95
Connection on both ends:
G 1‘‘ female
Medium:
AdBlue®
Flow capacity min. (l/min):
2
Flow capacity max. (l/min):
100
Pre-set flow direction:
horizontal
Permitted liquid temperature max. (°C):
40
Permitted ambient temperature (°C):
+10 / +50
Measuring tolerance (%):
0,5
Nominal pressure (bar):
3,5
Burst pressure (bar):
28
Pulses (pulses/l):
46
Contact-form:
A-shut-up device
Materials of parts in contact with liquid Meter housing:
stainless steel
Oval gears:
POM
Seals:
NBR 70
External dimensions LxWxH (mm):
100 x 100 x 65
Weight (kg):
0,65
Specification • Pulse generator for the Diesel Management System in stainless steel • Suitable for the use with urea
150
UREA ACCESSORIES AdBlue® Urea built-in counter
Item number Technical data
In-line meterdigital-NEF-VA
Distance in-/out flange (mm):
110
Connection on both ends:
G 1‘‘ female
Medium:
AdBlue®
Flow capacity min. (l/min):
15
Flow capacity max. (l/min):
100
Permitted liquid temperature max. (°C):
40
Permitted ambient temperature (°C):
-10 / +50
Measuring tolerance (%):
1
Nominal pressure (bar):
15
Burst pressure (bar):
60
23 295 870
turbine wheelG 1“ fem-G 1“ fem
F
Materials of parts in contact with liquid Meter housing:
stainless steel
Turbine:
POM
Seals:
NBR 70
Batteries:
Lithium SeZe AA, 3,6 V
External dimensions LxWxH (mm):
110 x 85 x 55
Weight (kg):
0,48
Specification • Totalisator for daily operation 5-digits with floating decimal, resettable to zero, partition 0,0 up to 99999 • Totalisator 5 digits with floating decimal, partition 0,0 up to 999999 • The display can be adapted to the direction of flow in 90° steps Features & Benefits • Easy to read 4-digits display • Resettable display • The metering precision can be adjusted to the viscosity using the calibration scale • The user can adjust following indicating units: Litres, gallons, pints, quarts
151
UREA PUMP SETS AdBlue®
Technical data
Features & Benefits
Input connection:
G 1'' male
Output connection:
G 1'' male
Separation efficiency (μ):
50
Filter surface (cm²):
190
Operating temperature area (°C):
-20 / +60
Operating temperature area (°F):
-4 / +140
• For the filtering of urea, rinsing-, processing- and drinking water • High flow rate with low differential pressure • Long service life • High dirt holding capacity • Four-layer filter structure produced in melt-blown method • Filter cartridge replaceable through screw-on filter cap
Materials Filter housing:
polyamide
Seals:
Viton®, FKM
Filtering candle:
polypropylene
152
Packaging Packing unit:
1,0
Urea filters and filter cartridges
Item number Technical data
Urea-filter unit
25 180
filter length 96 mm Filter length (mm):
96
Filter surface (cm²):
190
Technical data
Urea-filter unit
25 181
F
filter length 156 mm Filter length (mm):
156
Filter surface (cm²):
308
153
UREA PUMP SETS AdBlue®
Technical data
Features & Benefits
Input connection:
G 1'' male
Output connection:
G 1'' male
Separation efficiency (μ):
50
Filter surface (cm²):
190
Operating temperature area (°C):
-20 / +60
Operating temperature area (°F):
-4 / +140
• For the filtering of urea, rinsing-, processing- and drinking water • High flow rate with low differential pressure • Long service life • High dirt holding capacity • Four-layer filter structure produced in melt-blown method • Filter cartridge replaceable through screw-on filter cap
Materials Filter housing:
polyamide
Seals:
Viton®, FKM
Filtering candle:
polypropylene
154
Packaging Packing unit:
1,0
Urea filters and filter cartridges
Item number Technical data
Urea filtering candle
25 185
filter length 96 mm Filter length (mm):
96
Filter surface (cm²):
190
Dimensions (mm) / (inch):
96 x 63 / 3,78 x 2,48
Weight (kg) / (lb):
0,052 / 0,11
F Technical data
Urea filtering candle
25 186
filter length 156 mm Filter length (mm):
156
Filter surface (cm²):
308
Dimensions (mm) / (inch):
63 x 156 / 2,48 x 6,14
Weight (kg) / (lb):
0,085 / 0,19
155
UREA ACCESSORIES AdBlue® Urea hose reels
Item number 29 802
Hose reel for urea
Technical data
O-WB-20 bar-19 DN-8 m-St
Length of discharge hose (m):
8
Connection Discharge hose: G 3/4‘‘ male Length of connecting hose (m):
1
Connection to connecting hose:
G 3/4‘‘ female
Inner diameter of hose (DN):
19
Operating pressure max. (bar):
20
Lacquering Arm:
grey
Supporting plate:
grey
Encasing:
grey, black
Materials Discharge hose:
EPDM
Connecting hose:
EPDM
Arm:
Stahl, pulverbeschichtet
Supporting plate:
Stahl, pulverbeschichtet
Encasing:
Kunststoff
Seal:
Viton® (FKM)
External dimensions LxWxH (mm):
550 x 290 x 550
Weight (kg):
18
Specification • Hose reel for urea and water/air • open, for wall/floor mounting • With hose stop
156
UREA ACCESSORIES AdBlue® Other urea accessories
Item number Technical data
Urea suction hose-2 m
Length (m):
2
Inner diameter (mm):
20
Material:
Armorvin HNA
Ø inner 20 mm
Technical data
Urea suction hose-6 m
Length (m):
6
Inner diameter (mm):
20
Material:
Armorvin HNA
F
Urea suction hose-48,3 m 48,3
Inner diameter (mm):
20
Material:
Armorvin HNA
Technical data Dimensions LxWxH (mm)
85 x 89,7 x 190
Weight (kg):
0,2095
Technical data Connecting thread:
2“ BSP
Inner diameter (mm):
22
Material:
PP & PVC
Dimensions LxWxH (mm)
75 x 75 x 1080
Weight (kg):
0,168
25 191
Ø inner 20 mm
Technical data Length (m):
25 190
80 371 878
roll-Ø inner 20 mm
SEC-adapter for IBC containers
83 324
Suction tube for IBC
83 396
compatible with SEC-adapter
Specification • Can be dismantled
Technical data
Material:
PA and steel
Weight (kg):
0,0474
Foot valve with filter-G 1‘‘ female
23 200
157
MANAGEMENT SYSTEMS
System overview Diesel management system DMS
1 -/
ABC
4
5
2
GHI
7
PQRS
JKL
8
TUV
2.396.056 2.396.056 2.396.056 2.396.056
Pressure gauge
2.396.056
Disch valve In-line meter
Diesel-filter, exchangeable
Ultrasonic sensor for level indication Dieselpump
Temperature sensor
Leakage sensor
Tank 1
158
Discharge valve storage holder
3
DEF
G
6
MNO
9
WXYZ
0
DMS 1â&#x20AC;&#x201C;n 2.396.056
Pressure gauge
2.396.056 2.396.056 2.396.056 2.396.056
harge e Discharge Diesel-filter, exchangeable valve storage holder
In-line meter
Dieselpump Ultrasonic sensor for emptiness status
Leakage sensor
Tank 2
159
MANAGEMENT SYSTEMS
Technical data
Specification
Number of users (iButton):
1000
Delivery contents:
Number of vehicles:
1000
• SD card, reader for SD card with USB connector
Number of vehicles per user: 50 Type of user ID:
PIN and/or iButton
Type of display and size:
illuminated 5“-LCD display
Compatible operating systems:
Linux, MAC, Windows
Voltage (V):
230
Frequency (Hz):
50
Power consumption (A):
0,25
Protection class:
IP 54
Connecting cable, length (m):
1
Maximum settable dispensing quantity (l):
• Software and operating instructions on CD-ROM • 7 iButtons, coloured: 5 - black, 1 - red, and 1 - green • Diesel Management System in aluminium housing Features & Benefits • An integral heating in the DMS provides an operation and a clearness of the display even at low temperatures (tested until -25°C). • Two tanks can be operated with the DMS. • User identification by PIN and/or by iButton
0-999
The tank level for re-filling can be adjusted when the tank is empty (l): 0-999 (The level for re-filling will be arithmetically aclculated) Level indication (l) optional in connection to art.no:
0-10.000
Number of filling stations:
2
Dimensions LxWxH (mm)
240 x 156 x 56
Weight (kg):
2,1
• User friendly PC application for configuration and installation of storage tanks, tank volumes, users and vehicles • The PC application checks for available updates every 10 days • All data can be installed on a PC and can be transferred with a SD card to the DMS • The data of any refilling process can be readout on a PC and can be exported for special analysis. A USB adapter for the SD card is part of the product. • The SD card supplied offers space for the storage of several thousands of refilling processes. Packaging
160
Dimensions LxWxH (mm)
370 x 225 x 205
Weight (kg):
2,9
Packing unit:
1,0
Diesel management system DMS
Item number Diesel management system DMS
23 499
G
161
MANAGEMENT SYSTEMS
Technical data
Specification • 3 m connecting cable to user (pump)
Number of users (iButton):
96
Voltage (V):
230
Power input:
8 A continuous
Power input:
10 A peak
• Keypad: 10 pins with 2 special buttons * (Del) and # (Enter)
Protection class:
IP 54
• 3 LED'S for the using status (red, yellow, green)
Switching contact:
2-pin
Radio shielding:
relay contact
Connecting cable (m):
2, EUS
Locking device:
2-pin safety
Temperature range (°C):
-40 / +40
Dimensions LxWxH (mm)
150 x 100 x 42
Weight (kg):
1,2
162
Features & Benefits
• Quadruple DIP-SW for the settings Packaging Dimensions LxWxH (mm)
160 x 180 x 160
Packing unit:
1,0
Diesel management system DMS
Item number Technical data Type of user ID:
Code-box
23 494
PIN-code-box
23 495
PIN
Features & Benefits • User identification by PIN
Technical data Type of user ID:
PIN or iButton
G
Specification • 5 pcs. of iButtons in black Features & Benefits • User identification by PIN or iButton
163
MANAGEMENT SYSTEMS
Technical data
Specification
Connection 1:
G 1‘‘ female
Connection 2:
G 1‘‘ female
Nominal width:
DN 25
Metering principle:
oval gears
Typical media:
Engine oils, diesel
Viscosity (mPa s):
2 - 2000
Operating pressure min. (bar):
0,30
Store house temperature (°C):
-20 - +70
Store house humidity (%):
95
Operating temperature (°C):
-10 - +50
Measuring tolerance (%):
± 0,5
Repetition tolerance (%):
± 0,3
Housing material:
aluminium
164
• Can not be calibrated for public sales (NEF) Features & Benefits • Due to big differences in the viscosity of low temperature rapseed oil suffcient flow viscosity of liquid is recommended for a trouble-free operation Packaging Packing unit:
1,0
Diesel management system DMS
Item number Technical data
Pulse meter DMS
Flow capacity (l/min):
6 - 60
Nominal pressure (bar):
70
Burst pressure (bar):
140
Solution (l):
0,01
Pulses (pulses/l):
100
Decrease of pressure:
0,30 bar/DTE 25
Technical data
Pulse meter DMS
Flow capacity (l/min):
10 - 100
Nominal pressure (bar):
30
Burst pressure (bar):
60
Solution (l):
0,015
Pulses (pulses/l):
66,66
Decrease of pressure:
0,50 bar/DTE 25
Technical data 15 - 150
Nominal pressure (bar):
20
Burst pressure (bar):
40
Solution (l):
0,02
Pulses (pulses/l):
50
Decrease of pressure:
0,50 bar/DTE 25
G
23 058
10 up to 100 l
Pulse meter DMS
Flow capacity (l/min):
23 067
0 - 60 l
23 059
15 up to 150 l
165
MANAGEMENT SYSTEMS
System overview Oilmanagementsystem OMS
16 1
234533
23-06-96
30.00………………x 30.00………………x 30.00………………x 30.00………………x 30.00………………x
2
7 1
-/
4
2
ABC
5
3
DEF
6
GKI
JKL
MNO
PQRS
TUV
WXYZ
16 234533
16
23-06-96
30.00………………x 30.00………………x 30.00………………x 30.00………………x 30.00………………x
3
3
7 1
-/
4
8
9
8
2
ABC
5
3
1
DEF
-/
6
4
5
3
DEF
6
JKL
MNO
GKI
JKL
MNO
PQRS
TUV
WXYZ
PQRS
TUV
WXYZ
8
8
8
14
15
166
2
ABC
GKI
Power supply
Host computer
Master terminal
Printer
Slave terminal
Voucher printer
OMS PC
Pulse generator / solenoid valve ZVP
8
6 16
4
5
11
10 234533
23-06-96
30.00………………x 30.00………………x 30.00………………x 30.00………………x 30.00………………x
G
7
8
8
13 12
12
Waste oil monitoring
Electric pump
Pneumatic solenoid valve
Hose reel
Relay
Hose end flow meter
Pneumatic pump
RFID-reader
167
MANAGEMENT SYSTEMS
Technical data
Specification
Power supply (V):
24 V DC
Delivery contents:
Data transfer to the PC:
Ethernet
• SD card
Data transfer to the valves:
CAN-Bus Features & Benefits
PC Requirements:
Java runtime environment from Version 7
• Can be configured as Master- or Slave terminal • Up to 8 terminals can be connected over the CAN-bus • Up to 64 dispensing/delivery positions are possible
Terminal Number of Terminals (max):
8
• Up to 10 subnets can be managed through the PC application
Terminal designation:
20 digits (alphanum)
• User identification possible by PIN or RFID card
Housing material:
aluminium black anodized
• User friendly PC application for configuring and setting up tanks, content, users and nozzles
User Type of user ID:
PIN 4 digit (num) or RFID card (optional)
Number of users (PIN):
1000
Number of uses (RFID card):
1000
• Vehicle selection list pre-settable • Tank-level warning stop level settable • Continuous data exchange between PC and Terminal
Vehicle administration Number of vehicles:
100
Vehicle designation:
10 characters (alphanum)
Tank administration
• All dispensing operations data can be easily read at the PC and exported to other applications for analysis • Connection of a statement printer possible • Connection of an RFID card reader possible
Number of tanks (max):
20
Tank designation:
20 digits (alphanum)
Capacity per tank (l):
99999
Nozzle-valve-pulser Number of nozzle valves (max):
8
Nozzle valve designation:
20 digits (alphanum)
Maximum settable dispensing quantity (l):
999,99
Dimensions LxWxH (mm)
212 x 156 x 57
Weight (kg):
1,9
168
• The PC application checks once a day whether an update is available (free)
• Connection of a waste oil overfill protection possible Packaging Dimensions LxWxH (mm)
370 x 220 x 205
Weight including package (kg):
2,03
Packing unit:
1,0
Oil management system OMS
Item number Specification â&#x20AC;˘ Software and operating instructions on CD-ROM
Master Terminal
36 700
with Software
Slave Terminal
36 701
G
without Software
169
MANAGEMENT SYSTEMS
Technical data
Specification
Metering principle:
oval gears
Operating pressure (bar):
min. 0,30
Design:
can not be calibrated for public sales (NEF)
Power supply (V):
24 V DC
170
â&#x20AC;˘ Pre-mounted on mounting bracket for wall mounting Packaging Packing unit:
1,0
Oil management system OMS
Item number Technical data
Nozzle valve-pulser-NEF
Connection 1:
G 1/2‘‘ female
Connection 2:
G 1/2‘‘ female
Nominal width:
DN 12
Typical media:
engine, gear and hydraulic oil
Flow capacity (l/min):
0 - 30
Viscosity (mPa s):
8 - 5000
Nominal pressure (bar):
70
Temperature range (°C):
-10 / +50
Pulses (pulses/l):
207
Housing material:
aluminium
Power (W):
20
External dimensions LxWxH (mm):
180 x 95 x 134
Weight (kg):
2,9
36 704
G
Specification • With integrated filter
Technical data
Dispensing valve IPG-NEF
Connection 1:
G 1“ female
Connection 2:
G 1“ female
Nominal width:
DN 25
Typical media:
Diesel
Flow capacity (l/min):
0 - 60
Nominal pressure (bar):
16
Temperature range (°C):
-10 / +50
Pulses (pulses/l):
43
Housing material:
aluminium
Power (W):
20
External dimensions LxWxH (mm):
180 x 98 x 172
Weight (kg):
4,4
36 706
for Diesel
171
MANAGEMENT SYSTEMS
Technical data
Specification
Metering principle:
oval gears
Operating pressure (bar):
min. 0,30
Design:
can not be calibrated for public sales (NEF)
Power supply (V):
24 V DC
172
â&#x20AC;˘ Pre-mounted on mounting bracket for wall mounting Packaging Packing unit:
1,0
Oil management system OMS
Item number Technical data
Dispensing valve IPG-NEF
Connection 1:
G 3/4“ female
Connection 2:
G 3/4“ female
Nominal width:
DN 19
Typical media:
Urea
Flow capacity (l/min):
0 - 40
Nominal pressure (bar):
16
Temperature range (°C):
-10 / +80
Pulses (pulses/l):
207
Housing material:
stainless steel
Power (W):
100
External dimensions LxWxH (mm):
325 x 98 x 162
Weight (kg):
8,96
Technical data
G
Dispensing valve IPG-NEF
Connection 1:
G 3/4“ female
Connection 2:
G 3/4“ female
Nominal width:
DN 19
Typical media:
anti-freeze (FRSM)
Flow capacity (l/min):
0 - 60
Nominal pressure (bar):
0-16
Temperature range (°C):
-10 / +80
Pulses (pulses/l):
207
Housing material:
aluminium/ brass
Power (W):
100
External dimensions LxWxH (mm):
325 x 98 x 162
Weight (kg):
4,96
36 707
for Urea
36 708
for anti-freeze
173
MANAGEMENT SYSTEMS
Item number 36 702
Power supply
Technical data
230 V AC 50/60 Hz-24 V DC240 W
Input voltage (V):
85-264 V AC, 50/60 Hz
Output voltage (V):
24 V DC
Output current (A):
0 – 10
Nominal power (W):
240
Temperature range (°C):
-10 / +70
Casing:
Powder coated surfaces, 10 µm thickness
Dimensions LxWxH (mm)
200 x 200 x 142
Weight (kg):
3,14
Specification • On/Off switch ( key switch)
36 703
Power supply
Technical data
230 V AC 50/60 Hz-24 V DC480 W
Input voltage (V):
100-240 V AC, 50/60 Hz
Output voltage (V):
24 V DC
Output current (A):
0 – 20
Nominal power (W):
480
Temperature range (°C):
-10 / +70
Casing:
Powder coated surfaces, 10 µm thickness
Colour:
grau
Dimensions LxWxH (mm)
300 x 300 x 155
Weight (kg):
8,5
Specification • On/Off switch ( key switch) • Max. of 24 valves (dispensers)
174
Oil management system OMS
Item number Technical data
Pneumatic solenoid valve
Valve function:
3/2 closed monostable
Actuation:
electric
Operating pressure (bar):
+1,5 /+8
Type of reset:
mechanical spring
Protection class:
IP 65
Operating medium:
compressed air according to ISO 8573-1: 2010
Pneumatic connection 1:
G 1/4‘‘
Seal material
NBR
Housing material:
aluminium die casting
Cable construction:
3 x 0,75 mm²
Cable diameter (mm):
6
Cable length (m):
2,5
Weight (kg):
0,267
Technical data
3/2 closed-1,5-8 bar
G
Receipt printer
Printing method:
thermal line printing
Print speed (mm/sec):
300
Paper types:
receipt
Column capacity receipt:
paper width 80 mm, 56 / 42
Character height (mm):
0.99 (W) x 2.4 (H) / 1.41 (W) x 3.39 (H)
Paper size paper roll (mm):
79,50 +/- 0,50 (W) x Ø 83 57,50 +/- 0,50 (W) x Ø 83 (optional)
Connections:
USB 2.0 Type B, RS-232, cash drawer connector
Input voltage (V):
100-240 V AC, 50/60 Hz
Operating voltage (V):
24
36 705
36 710
Operating temperature (°C): +5 / +45 Storage temperature (°C):
-10 / +50
Installation:
horizontal, vertical, wall mount
Dimensions LxWxH (mm)
195 x 145 x 148
Weight (kg):
1,6
175
MANAGEMENT SYSTEMS
Item number 36 712
RFID-card reader for PC
Technical data
TS-HR38-USB
Reading distances:
up to 100 mm (depending on transponder size)
Operating temperature (°C): -10 / +55 Power supply:
via USB port
Interface:
USB-HID
Input/Output (optional):
relay contact, sensor input, TTL, Summer
External dimensions LxWxH (mm):
80 x 80 x 28
Weight (kg):
0,1414
Specification • Transponder with USB Interface • Complete with case and USB cable Features & Benefits • Transponder reader for Mifare ISO 14443 and ISO 15693 compliant transponders
36 714
RFID-card reader for Terminal
Technical data
TS-HR38-TTL
Reading distances:
up to 100 mm (depending on transponder size)
Operating temperature (°C): -10 / +55 Power supply (V):
5 V DC via RS232
Interface:
RS232
Baudrate:
19200
Input/Output (optional):
relay contact, sensor input, TTL, Summer
External dimensions LxWxH (mm): Dimensions LxWxH (mm)
80 x 80 x 28
Weight (kg):
0,1424
Specification • Transponder with TTL-Pegel Interface Features & Benefits • Transponder reader for Mifare ISO 14443 and ISO 15693 compliant transponders
176
Oil management system OMS
Item number Technical data
RFID card
Transponder type:
MIFARE® Classic 1K
Norm:
ISO 14443
Frequency (MHz):
13,56
External dimensions LxWxH (mm):
85,5 x 54 x 0,85
Weight (kg):
0,054
36 716
Specification • Transponder card with 1Kbit ICODE SLI chip
G Technical data RFID chip
MIFARE® Classic 1K
Norm
ISO 14443
Frequency (MHz)
13,56
Colour housing
blue
Colour of cover
white
Dimensions LxWxH (mm)
39 x 31 x 4
Weight (kg)
0,004
RFID key fob
36 717
Interface adapter plug
36 720
Specification • With key fob
Technical data Dimensions LxWxH (mm)
62,5 x 57,5 x 17,3
Weight (kg):
0,03
9/25-pol. SUB- for printer
Features & Benefits • Accessories for the receipt printer (36 710)
Technical data Weight (kg):
Serial data cable-1 m connector 0,1
36 722
for printer
Features & Benefits • Accessories for the receipt printer (36 710)
177
MANAGEMENT SYSTEMS
Item number 36 730
Relay for 230-Vpump control
Technical data
24 V DC
Nominal voltage (V):
24 V DC
Switching capacity:
max. 16 A / 250 V AC
Type of contact:
1 Wechsler
Colour:
grau
Housing material:
Polystyrol
Protection class:
IP 54
Dimensions LxWxH (mm)
110 x 110 x 90
Weight (kg):
0,35
Specification Delivery contents: • Relay board 24 V DC coil • 3-conductor pass clamp blue • 3-conductor protective clamp
36 731
Relay for 400-Vpump control
Technical data
24 V DC
Nominal voltage (V):
24 V DC
Switching capacity:
22 A / 400 V AC
Type of contact:
1 Wechsler
Colour:
grau
Housing material:
Polystyrol
Protection class:
IP 54
Dimensions LxWxH (mm)
110 x 110 x 90
Weight (kg):
0,57
Specification Delivery contents: • Contactor 24 V • 3-conductor pass clamp blue • 3-conductor protective clamp
178
Accessories for Management systems
Item number
iButton for userblack
set for 10 users
iButton userâ&#x20AC;&#x2DC;s identification
with 2 safety codes
23 069
23 069 950
G
179
MANAGEMENT SYSTEMS
Item number 23 066
23 068
Nozzle support DMS
Technical data
with on-off switch
Dimensions (mm):
120x75x435
Weight (kg):
1,3
Material:
Stahl, Alu
Switch stream:
max. 3 A 12 V DC / max. 3 A 250 V AC
Temperature range (°C):
-40°C up to +120°C
Level indicator and
Technical data
leak indicator for DMS
Housing material:
UV stabilized polypropylene
Operating temperature (°C): -10 / +60 Store house temperature (°C):
-20 / +60
Altitude range:
<2 km above sea level
Protection class:
IP 67
Ultrasonic range:
>12 cm up to <3 m
Ultrasonic signal redirection:
30°
Power requirement:
external 3 V DC
Humidity range:
15 % - 95 %
Ultrasonic resolution:
+/- 1 cm
Outlet:
hard-wired; 50 cm of white PVC4-core cable to BS4737
Dimensions LxWxH (mm)
88 x 88 x 145
Weight (kg):
0,3
Specification • With leak sensor (diameter 35 mm, height 83 mm) • With threaded connection (1 1/4“, 1 1/2“ und 2“ BSP) • With seal (EPDP material, diameter 88 mm, height 4 mm)
180
Accessories for Management systems
Item number Technical data
Door opener
Storage capacity
2000 transponder
Standalone RFID access control system
RFID type:
13,56 MHz (MIFARE® Classic Transponder)
Power supply (V):
12 V direct current (12 - 24 V DC)
Power consumption (mA):
< 35
Contact-free RFID transponders:
MIFARE® Classic
Technology:
13,56 MHz
Reading range:
3 - 8 cm (according to type of transponder)
External wiring:
potential-free changeover contact relay, external button, door contact, door gong
Wiegand data format (bit):
26 – 37
PIN code:
4 – 6 digits
Relay:
potential-free changeover contact relay
Adjustable switching time:
1 - 99 seconds (default 5 sec) or maintained operation
Load, relay contacts:
up to 2 A
Protection class:
IP 65
Operating temperature area (°C):
-40 / +60
Material:
aluminium
Colour:
silver, black
Dimensions LxWxH (mm):
125 x 83 x 21,7
Weight (kg):
0,52
36 715
G
Packaging • Packing unit:
1,0
181
VOLUME METERS
technic that leads
182
outperformed + outlast
H
183
VOLUME METERS Oval gear meters, digital
Technical data
Specification
Connection:
G 1/2‘‘ female
• Swivel joint (19 616)
Nominal width:
DN 12
• valve
Metering principle:
oval gears
Typical media:
Engine oils SAE 5 - 50, gear oils SAE 80 - 240
Flow capacity (l/min):
0 - 30
Viscosity (mPa s):
8 - 5000
Nominal pressure (bar):
70
Operating pressure (bar):
min. 0,30
Temperature range (°C):
-10 / +50
• Resettable display
Measuring tolerance (%):
± 0,5%
• Rubber buffer provides shock prevention in case of rough use.
Repetition tolerance (%):
± 0,3
Solution (l):
0,002
Pulses (pulses/l):
216
Design:
Can not be calibrated for public sales (NEF)
Housing material:
aluminium die casting
Packaging
Display:
digital, three digits and two decimal digits
Dimensions LxWxH (mm):
590 x 120 x 155
Height of the digits (mm):
8
Packing unit:
1.0
Battery type:
LR1 1,5 V
Lifetime of battery:
2200 hours, equivalent to a counted quantity of approximately 3.960.000 litres of oil
184
Features & Benefits • Housing including the chamber for electronics are made of aluminium, cast-rinde will not be finished • Impact-resistant electronics • Easy to read 5-digits display
• The metering precision can be adjusted to the viscosity using the calibration scale • The user can adjust following indicating units: Litres, gallons, pints, quarts
Hand-held meters
Item number Specification • Discharge hose with 90° angle (19 746) and manual non-drip nozzle
Specification • Angled spout (19 741)
Hose end meter 0-30 l/min-NEF
19 698
discharge 90°-with swivel joint
Hose end meter 0-30 l/min-NEF
19 698 950
angled discharge spout
• Anti-drip nozzle, automatic shut-off
H
185
VOLUME METERS Oval gear meters, digital
Technical data
Specification
Connecting thread:
G 1/2‘‘ female
Nominal width:
DN 12
Metering principle:
oval gears
Typical media:
Oils and self-lubricating media
• Swivel joint (19 613) Features & Benefits • Case and measuring chamber for electronics made of die-cast-aluminium
Flow capacity (l/min):
0 - 30
Nominal pressure (bar):
50
• Impact-resistant electronics
Operating pressure (bar):
min. 0,30
Temperature range (°C):
-10 / +60
• Totalisator for daily operation 5-digits with floating decimal, resettable to zero, partition 0,000 up to 99999
Measuring tolerance (%):
± 0,5%
Repetition tolerance (%):
± 0,3
Design:
Can not be calibrated for public sales (NEF)
Display:
digital
Height of the digits (mm):
8
Battery type:
2 x LR1 1,5 V
Lifetime of battery:
approx. 2000 h
Materials of parts in contact with liquid Handle/case:
AlSi12 CD-coated
Oval gears:
POM
Valve/bearing pin:
stainless steel 1.4305
Seals:
NBR/FKM
• Totalisator 6 digits with floating decimal, partition 0,0 up to 999999 • All aluminium parts matt black coated by cataphoresis • The metering precision can be adjusted to the viscosity using the calibration scale • The user can adjust following indicating units: Litres, gallons, pints, quarts • Meter case protected by removable rubber cover • Protective bracket, rubberized for the protection of the meter and other components • Surface treatment of all external parts ensures high corrosion resistance • Display of the current flow rate • Batteries replaceable Packaging Packing unit:
186
1.0
Hand-held meters
Item number Specification • Discharge hose 90° (19 746)
Hose end meter 30 l/min-NEF
19 915
discharge hose 90°with swivel joint
• Anti-drip nozzle, manual shut-off
Specification • Angled spout (19 741)
Hose end meter 30 l/min-NEF
19 915 950
discharge spout 30°with swivel joint
• Anti-drip nozzle, automatic shut-off
Specification • Discharge hose (19 745)
H
Hose end meter 30 l/min-NEF
19 915 951
discharge hose straightswivel joint
• Anti-drip nozzle, automatic shut-off
187
VOLUME METERS Oval gear meters, digital
Technical data
Specification
Connecting thread:
G 3/4‘‘ female
• Discharge hose straight (19 930)
Nominal width:
DN 20
• Anti-drip nozzle, manual shut-off
Metering principle:
oval gears
• Swivel joint (19 613)
Typical media:
Oils and self-lubricating media
Flow capacity (l/min):
0 - 100
Nominal pressure (bar):
50
Operating pressure (bar):
min. 0,30
Temperature range (°C):
-10 / +60
Measuring tolerance (%):
± 0,5%
Repetition tolerance (%):
± 0,3
Design:
Can not be calibrated for public sales (NEF)
Display:
digital
Height of the digits (mm):
8
• All aluminium parts matt black coated by cataphoresis
Battery type:
2 x LR1 1,5 V
Lifetime of battery:
approx. 2000 h
• The metering precision can be adjusted to the viscosity using the calibration scale
Features & Benefits • Case and measuring chamber for electronics made of die-cast-aluminium • Impact-resistant electronics • Totalisator for daily operation 5-digits with floating decimal, resettable to zero, partition 0,000 up to 99999 • Totalisator 6 digits with floating decimal, partition 0,0 up to 999999
Materials of parts in contact with liquid
• The user can adjust following indicating units: Litres, gallons, pints, quarts
Handle/case:
AlSi12 CD-coated
• Meter case protected by removable rubber cover
Oval gears:
POM
Valve/bearing pin:
stainless steel 1.4305
Seals:
NBR/FKM
• Protective bracket, rubberized for the protection of the meter and other components • Surface treatment of all external parts ensures high corrosion resistance • Display of the current flow rate • Batteries replaceable Packaging Packing unit:
188
1.0
Hand-held meters
Item number Hose end meter 0-100 l/min-NEF
19 925
discharge hose straight-swivel joint
H
189
VOLUME METERS Oval gear meters, digital
Technical data
Specification • Due to big differences in the viscosity of low temperature rapseed oil suffcient flow viscosity of liquid is recommended for a trouble-free operation.
Metering principle:
oval gears
Typical media:
Engine oils, diesel, cooling agents
Operating pressure min. (bar):
0,30
Store house temperature (°C):
• Totalisator for daily operation 5-digits with floating decimal, resettable to zero, partition 0,000 up to 99999
-20 - +70
Store house humidity (%):
95
• Totalisator 6 digits with floating decimal, partition 0,0 up to 999999
Operating temperature (°C):
-10 / +50
Housing material:
aluminium
Measuring tolerance (%):
+/- 0,5
Repetition tolerance (%):
± 0,3
Design:
Can not be calibrated for public sales (NEF)
Display:
digital, three digits and two decimal digits
Height of the digits (mm):
13
Battery type:
2 x 1,5 V
Features & Benefits • Housing including the chamber for electronics are made of aluminium, cast-rinde will not be finished • Impact-resistant electronics • The metering precision can be adjusted to the viscosity using the calibration scale • Easy to read 5-digits display • Resettable display • The user can adjust following indicating units: Litres, gallons, pints, quarts Packaging Packing unit:
190
1.0
Built-in meters for oil
Item number Technical data
Built-in meter 5-60 l/min-NEF
Connection 1:
G 1‘‘ female
Connection 2:
G 1‘‘ female
Nominal width:
DN 25
Flow capacity (l/min):
5-60
Viscosity (mPa s):
2 - 2000
Nominal pressure (bar):
70
Burst pressure (bar):
140
Solution (l):
0,01
Pulses (pulses/l):
100
Decrease of pressure:
0,30 bar/DTE 25
19 692
with display
H Technical data
Built-in meter 10-100 l/min-NEF
Connection 1:
G 1‘‘ female
Connection 2:
G 1‘‘ female
Nominal width:
DN 25
Flow capacity (l/min):
10-100
Viscosity (mPa s):
2 - 2000
Nominal pressure (bar):
30
Burst pressure (bar):
60
Solution (l):
0,015
Pulses (pulses/l):
66,66
Decrease of pressure:
0,50 bar/DTE 25
Technical data
with display
Built-in meter 15-150 l/min-NEF
Connection 1:
G 1 1/2‘‘ female
Connection 2:
G 1 1/2‘‘ female
Nominal width:
DN 40
Flow capacity (l/min):
15-150
Viscosity (mPa s):
2 - 2000
Nominal pressure (bar):
20
Burst pressure (bar):
40
Solution (l):
0,02
Pulses (pulses/l):
50
Decrease of pressure:
0,50 bar/DTE 25
19 693
19 694
with display
191
VOLUME METERS Oval gear meters, digital
Technical data
Specification
Metering principle:
oval gears
Typical media:
Engine oils, diesel, cooling agents
• Due to big differences in the viscosity of low temperature rapseed oil suffcient flow viscosity of liquid is recommended for a trouble-free operation.
Operating pressure min. (bar):
0,30
Features & Benefits
Store house temperature (°C):
-20 - +70
Store house humidity (%):
95
• Housing including the chamber for electronics are made of aluminium, cast-rinde will not be finished
Operating temperature (°C):
-10 / +50
• Impact-resistant electronics
Housing material:
aluminium
Measuring tolerance (%):
+/- 0,5
• The metering precision can be adjusted to the viscosity using the calibration scale
Repetition tolerance (%):
± 0,3
Design:
Can not be calibrated for public sales (NEF)
192
Packaging Packing unit:
1.0
Built-in meters for oil
Item number Technical data
Built-in meter 5-60 l/min-NEF
Connection 1:
G 1‘‘ female
Connection 2:
G 1‘‘ female
Nominal width:
DN 25
Flow capacity (l/min):
5-60
Viscosity (mPa s):
2 - 2000
Nominal pressure (bar):
70
Burst pressure (bar):
140
Solution (l):
0,01
Pulses (pulses/l):
100
Decrease of pressure:
0,30 bar/DTE 25
19 692 691
with display
H Technical data
Built-in meter 10-100 l/min-NEF
Connection 1:
G 1‘‘ female
Connection 2:
G 1‘‘ female
Nominal width:
DN 25
Flow capacity (l/min):
10-100
Viscosity (mPa s):
2 - 2000
Nominal pressure (bar):
30
Burst pressure (bar):
60
Solution (l):
0,015
Pulses (pulses/l):
66,66
Decrease of pressure:
0,50 bar/DTE 25
Technical data
with display
Built-in meter 15-150 l/min-NEF
Connection 1:
G 1 1/2‘‘ female
Connection 2:
G 1 1/2‘‘ female
Nominal width:
DN 40
Flow capacity (l/min):
15-150
Viscosity (mPa s):
2 - 2000
Nominal pressure (bar):
20
Burst pressure (bar):
40
Solution (l):
0,02
Pulses (pulses/l):
50
Decrease of pressure:
0,50 bar/DTE 25
19 693 691
19 694 691
with display
193
VOLUME METERS Oval gear meters, digital
Technical data
Specification • Totalisator for daily operation 5-digits with floating decimal, resettable to zero, partition 0,000 up to 99999
Distance in-/out flange (mm):
95
Connection on both ends:
G 1‘‘ female
Media:
diesel, fuel oil, selflubricating low viscosity liquids
Flow capacity min. (l/min):
2
Features & Benefits
Flow capacity max. (l/min):
100
• Easy to read 5-digits display
Pre-set flow direction:
horizontal
Permitted liquid temperature max. (°C):
40
Permitted ambient temperature (°C):
• The metering precision can be adjusted to the viscosity using the calibration scale
-10 / +50
Measuring tolerance (%):
0,5
• The user can adjust following indicating units: Litres, gallons, pints, quarts
Nominal pressure (bar):
3,5
Burst pressure (bar):
28
Materials of parts in contact with liquid Meter housing:
AlSi 12 (sea water resistant)
Oval gears:
POM
Seals:
NBR 70
194
• Totalisator 6 digits with floating decimal, partition 0,0 up to 999999
• Resettable display
Packaging Dimensions LxWxH (mm):
145 x 126 x 78
Weight including package (kg):
0,67
Packing unit:
1.0
Built-in meters for diesel
Item number Technical data
NUMERIxx³G 1“ fem-G 1“ fem
External dimensions LWH (mm):
100 x 100 x 65
Weight (kg):
0,58
23 190
oval gear meter-digital
Technical data
Pulse meterG 1“ fem-G 1“ fem
External dimensions LWH (mm):
100 x 130 x 65
Weight (kg):
0,65
23 829
with display
Technical data
H
Pulse meterG 1“ fem-G 1“ fem
External dimensions LWH (mm):
100 x 100 x 95
Weight (kg):
0,65
23 820
oval gear meter
Specification • without display
195
VOLUME METERS Oval gear meters, digital
Technical data
Specification
Distance in-/out flange (mm):
95
• Pulse generator for the Diesel Management System in stainless steel
Connection on both ends:
G 1‘‘ female
• Suitable for the use with urea
Media:
AdBlue®
Flow capacity min. (l/min):
2
Packaging
Flow capacity max. (l/min):
100
Dimensions LxWxH (mm):
145 x 126 x 78
Pre-set flow direction:
horizontal
Permitted liquid temperature max. (°C):
Weight including package (kg):
0,74
40
Packing unit:
1.0
Permitted ambient temperature (°C):
-10 / +50
Measuring tolerance (%):
0,5
Nominal pressure (bar):
3,5
Burst pressure (bar):
28
Pulses (pulses/l):
46
Contact-form:
A-shut-up device
Materials of parts in contact with liquid Meter housing:
stainless steel
Oval gears:
POM
Seals:
NBR 70
196
Built-in meters for urea
Item number Technical data
Pulse meterG 1â&#x20AC;&#x153; fem-G 1â&#x20AC;&#x153; fem-urea
External dimensions LWH (mm):
100 x 100 x 65
Weight (kg):
0,65
23 823
oval gear meter-stainl. steel
H
197
VOLUME METERS Oval gear meters, digital
Technical data
Specification
Connection 1:
G 1/8“ i
• Grease meter with batteries, spout and retention adapters
Connection 2:
G 1/8“ i
• Battery LR1 Lady Duracell-MN9100 (88431)
Application range:
Greases NLGI 2
• Spout, 80 mm, 25°, R 1/8" male, R 1/8" male (02 427)
Measurement unit:
liters or cm³
Flow rate (cm³/min):
0-1000
• Retention adapter, steel, galvanized, G 1/8'' female, M 10 x 1 male (12 016)
Operating pressure max. (bar/psi):
700/10153
Burst pressure (bar/psi):
1000/14504
• Retention adapter, steel, galvanized, R 1/8'' female, M 10 x 1 male (12 086)
Temperature range (°C):
- 20 /+60
Housing material:
AlSi 12 (sea water resistant)
Surface treatment:
Black electro-coating
Accuracy of repeated processes 0-300 bar (%):
1
• The metering precision can be adjusted to the viscosity using the calibration scale
Display:
Partial quantity + totalisator
• Easy to read 5-digits display
Height of the digits (mm):
13
• Resettable display
Voltage (V):
2,3 - 3,3
Power consumption (A):
800μA
Batteries:
2 x 1,5V
Battery type:
1,5V Lady LR1 (88431)
Durability of batteries max. (years):
Features & Benefits • Easy calibration
• Impact-resistant electronics • Standby mode after 10 minutes without using the system Packaging
2
Dimensions LxWxH (mm):
155 x 140 x 110
Display:
5 digits, partial and total quantity, resettable
Weight (kg):
0,61
Dimensions LxWxH (mm):
85 x 73 x 57
Packing unit:
1.0
Weight (kg):
0,437
198
Built-in meters for grease
Item number In-line meter for grease-NEF
18 115
with display-0-1000 cm続/min
H
199
VOLUME METERS Oval gear meters, mechanical
Technical data
Specification • Meter: daily meter with 3 digits, resettable, partition 100 ml
Distance in-/out flange (mm):
95
Connection on both ends:
G 1‘‘ female
Pre-set flow direction:
from left to right
Media:
diesel, fuel oil, selflubricating low viscosity liquids
Features & Benefits
Flow capacity min. (l/min):
2
• Meter for various in-line installation
Flow capacity max. (l/min):
100
Permitted liquid temperature max. (°C):
-10 / +60
Permitted ambient temperature (°C):
• Totalisator 6 digits, accounts in litres • Totalisator re-starts after 999 999 l with zero
Packaging Dimensions LxWxH (mm):
150 x 135 x 135
-10 / +80
Weight (kg):
1,27
Measuring tolerance (%):
+/- 1
Packing unit:
1.0
Nominal pressure (bar):
3,5
Burst pressure (bar):
28
Materials of parts in contact with liquid Meter housing:
AlSi 12 (sea water resistant)
Oval gears:
POM
Gear mechanism:
ABS-plastic
Seals:
NBR 70
External dimensions LWH (mm):
145 x 120 x 125
Weight (kg):
1,14
200
Built-in meters for diesel
Item number NUMERIxx³G 1“ fem-G 1“ fem
23 192
oval gear meter-mechnical
Counter-spare part-for
23 298
NUMERIxx³ (23 192)G 1“ fem-G 1“ fem-NBR
H
201
VOLUME METERS Impeller meters, digital
Technical data
Specification
Connection 1:
G 1‘‘ male
• Can not be calibrated for public sales (NEF)
Connection 2:
G 1‘‘ female
• Suitable for PREMAxx - Diesel pumps or electric Diesel pumps
Media:
Diesel and BIO diesel
• Packed in carton box
Flow capacity (l/min):
10 - 55
Temperature range (°C):
-10 +60
Max. pressure (bar):
2
Burst pressure (bar):
4
Housing material:
POM
Display:
• With bar code Packaging Dimensions LxWxH (mm):
220 x 160 x 75
4-digits, with 2 decimal digits
Weight (kg):
0,49
Partial summation:
9 different part sums individually callable, each part sum can be reset to zero.
Packing unit:
1.0
Total summation:
is counted in litres and at 99 999 l start at zero, with 1 decimal digit
Measuring tolerance (%):
±1%
Metering unit:
can be easily calibrated (set to PREMAxx at factory)
Installation position:
optional in 90° steps
Batteries:
Lithium SeZe AA, 3,6 V
Dimensions LxWxH (mm):
120 x 110 x 60
Weight (kg):
0,39
202
Built-in meters for diesel
Item number In-line meter-digital
23 287
vane-G 1‘‘ fem-G 1‘‘ male
H
203
VOLUME METERS Turbine-wheel meters
Technical data
Specification • Totalisator for daily operation 5-digits with floating decimal, resettable to zero, partition 0,0 up to 99999
Distance in-/out flange (mm):
110
Connection on both ends:
G 1‘‘ female
Flow capacity min. (l/min):
15
Flow capacity max. (l/min):
100
• The display can be adapted to the direction of flow in 90° steps
Permitted liquid temperature max. (°C):
40
Features & Benefits
Permitted ambient temperature (°C):
-10 / +50
Measuring tolerance (%):
1
Materials of parts in contact with liquid Turbine:
POM
Seals:
NBR 70
External dimensions LWH (mm):
110 x 85 x 55
Weight (kg):
0,48
204
• Totalisator 5 digits with floating decimal, partition 0,0 up to 999999
• Easy to read 4-digits display • Resettable display • The metering precision can be adjusted to the viscosity using the calibration scale • The user can adjust following indicating units: Litres, gallons, pints, quarts Packaging Dimensions LxWxH (mm):
145 x 126 x 78
Weight including package (kg):
0,57
Packing unit:
1.0
Turbine-wheel meters
Item number Technical data
In-line meter-digital-NEF
Media:
diesel, fuel oil, selflubricating low viscosity liquids
Nominal pressure (bar):
3,5
Burst pressure (bar):
28
Meter housing:
AlSi 12 (sea water resistant)
Technical data
turbine wheelG 1“ fem-G 1“ fem
In-line meter-digitalNEF-VA
Media:
AdBlue®
Nominal pressure (bar):
15
Burst pressure (bar):
60
Meter housing:
stainless steel
23 295
H
23 295 870
turbine wheelG 1“ fem-G 1“ fem
205
NOZZLE VALVES AND SWIVEL JOINTS
technic that leads
206
outperformed + outlast
I
207
NOZZLE VALVES AND SWIVEL JOINTS
Item number 23 161
ZVPP-G 1“ female80 l/min
Technical data Connection:
G 1‘‘ female
Flow capacity max. (l/min):
80
Outside diameter discharge tube (mm):
34,0
Materials of parts in contact with liquid Casing:
polypropylene
Seals:
NBR
Switch-off:
manually
Working pressure (bar):
0,5 - 4
Operating pressure max. (bar):
4
Dimensions LxWxH (mm):
280 x 190 x 50
Weight (kg):
0,26
Specification • Polypropylen
208
Nozzle valves for diesel
Item number Technical data
ZVD-G 1“ female100 l/min
Connection:
G 1‘‘ female
Flow capacity max. (l/min):
100
Outside diameter discharge tube (mm):
25,3
23 171
Aluminium
Materials of parts in contact with liquid Casing:
aluminium
Seals:
NBR
Discharge pipe:
steel, galvanized
Switch-off:
manually
Dimensions LxWxH (mm):
320 x 165 x 50
Weight (kg):
0,658
I
Specification • Packed in carton box • Swivel joint (19 625)
209
NOZZLE VALVES AND SWIVEL JOINTS
Technical data
Specification
Materials of parts in contact with liquid
â&#x20AC;˘ Packed in carton box
Casing:
aluminium
Seals:
NBR
Discharge pipe:
steel, galvanized
Switch-off:
automatic
210
Packaging Packing unit:
1.0
Nozzle valves for diesel
Item number Technical data
ZVAD-G 3/4“ female60 l/min
Connecting thread:
G 1‘‘ female, swivel (19 621)
Flow capacity max. (l/min):
60
Outside diameter discharge tube (mm):
24
Dimensions LxWxH (mm):
350 x 160 x 55
Weight (kg):
1,4
23 176
Alu-DRG-G 1“ femaleG 3/4“ male
Specification • Swivel joint (19 621)
Technical data
ZVAD-G 1“ female100 l/min
Connecting thread:
G 1‘‘ female, swivel (19 625)
Flow capacity max. (l/min):
100
Outside diameter discharge tube (mm):
28,2
Dimensions LxWxH (mm):
440 x 190 x 60
Weight (kg):
1,88
I
23 178
Alu-DRG G 1“ femaleG 1“ male
Specification • Swivel joint (19 625)
211
NOZZLE VALVES AND SWIVEL JOINTS
Technical data
Specification
Materials of parts in contact with liquid
â&#x20AC;˘ Packed in carton box
Casing:
aluminium
Seals:
NBR
Discharge pipe:
steel, galvanized
Switch-off:
automatic
212
Packaging Packing unit:
1.0
Nozzle valves for diesel with type approval
Item number Technical data
ZVABD-G 1“ fem-60 l/min
Connecting thread:
G 1‘‘ female, swivel (19 621)
Flow capacity max. (l/min):
60
Outside diameter discharge tube (mm):
23,7
Dimensions LxWxH (mm):
350 x 160 x 55
Weight (kg):
1,549
23 168
Aluminium-D design approval
Specification • With German design approval • Swivel joint (19 621)
I Technical data
ZVABD-G 1“ female100 l/min
Connecting thread:
G 1‘‘ female, swivel (19 625)
Flow capacity max. (l/min):
100
Outside diameter discharge tube (mm):
30,2
Dimensions LxWxH (mm):
440 x 190 x 60
Weight (kg):
1,6
23 160
Aluminium-D design approval
Specification • Swivel joint (19 625)
213
NOZZLE VALVES AND SWIVEL JOINTS
Technical data
Specification
Connection:
G 1/2‘‘ female, swivel
Flow capacity max. (l/min):
30
Operating pressure max. (bar):
70
Materials of parts in contact with liquid Casing:
aluminium
Seals:
FKM (Viton®)
Housing material:
aluminium
Switch-off:
manually
214
• Swivel joint (19 616) Packaging Packing unit:
1.0
Nozzle valves for oil
Item number Technical data
Filling valve with swivel joint
Discharge pipe:
steel, galvanized
Weight (kg):
0,775
19 718
discharge spout 30°G 1/2‘‘ female
Specification • Angled spout (19 741) • Automatic non-drip nozzle (19 747) • Swivel joint (19 616)
Technical data
Filling valve with swivel joint
Hose length (mm):
270
Outside diameter of hose (mm):
10
Weight (kg):
0,863
19 718 954
I
discharge hoseG 1/2‘‘ female
Specification • Discharge hose with 90° angle (19 746) and manual non-drip nozzle • Swivel joint (19 616)
215
NOZZLE VALVES AND SWIVEL JOINTS
Technical data
Specification • Swivel joint (19 613)
Connecting thread:
G 1/2‘‘ female
Nominal width:
DN 12
Typical media:
Oils and self-lubricating media
Flow capacity (l/min):
0 - 30
• Case of die-cast-aluminium
Nominal pressure (bar):
50
• All aluminium parts matt black coated by cataphoresis
Operating pressure (bar):
0
Temperature range (°C):
-30 / +70
Materials of parts in contact with liquid Handle/case:
AlSi12 CD-coated
Valve/bearing pin:
stainless steel 1.4305
Seals:
NBR/FKM
216
Features & Benefits
• Protective bracket, rubberized for the protection of the meter and other components • Surface treatment of all external parts ensures high corrosion resistance Packaging Packing unit:
1.0
Nozzle valves for oil
Item number Specification • Discharge hose 90° (19 746)
Filling valve 0-30 l/min
19 918
discharge hose 90°with swivel joint
• Anti-drip nozzle, manual shut-off
Specification • Angled spout (19 741)
Filling valve 0-30 l/min
19 918 950
discharge spout 30°with swivel joint
• Anti-drip nozzle, automatic shut-off
I Specification • Discharge hose (19 745)
Filling valve 0-30 l/min
19 918 956
discharge hose straightswivel joint
• Anti-drip nozzle, automatic shut-off
217
NOZZLE VALVES AND SWIVEL JOINTS
Technical data
Specification
Connecting thread:
G ¾‘‘ i
• Discharge hose straight (19 930)
Nominal width:
DN 20
• Anti-drip nozzle, manual shut-off
Typical media:
Oils and self-lubricating media
• Swivel joint (19 613)
Flow capacity (l/min):
0 - 100
Nominal pressure (bar):
50
Operating pressure (bar):
min. 0,30
Temperature range (°C):
-30 / +70
Materials of parts in contact with liquid Handle/case:
AlSi12 CD-coated
Valve/bearing pin:
stainless steel 1.4305
Seals:
NBR/FKM
Features & Benefits • Case of die-cast-aluminium • All aluminium parts matt black coated by cataphoresis • Protective bracket, rubberized for the protection of the meter and other components • Surface treatment of all external parts ensures high corrosion resistance Packaging Packing unit:
218
1.0
Nozzle valves for oil
Item number Filling valve-swivel joint
19 928
G 1/2â&#x20AC;&#x153; femaledispensing spout
I
219
NOZZLE VALVES AND SWIVEL JOINTS Swivel joints
Item number 19 621
Swivel DN 19
Technical data
G 3/4“ male-G 1“ fem
Connection 1:
G 1‘‘ female
Connection 2:
G 3/4‘‘ male
Length (mm):
62,2
Materials of gaskets in contact with liquid O-ring:
NBR 70
Flat gasket:
FKM (Viton®)
Nominal pressure (bar):
5
Weight (kg):
0,2878
Specification • To suit automatic control guns for diesel Packaging
19 625
• Dimensions LxWxH (mm):
71 x 47 x 47
• Weight (kg):
0,2978
• Packing unit:
1.0
Swivel DN 19
Technical data
G 1“ male-G 1“ fem
Connection 1:
G 1‘‘ female
Connection 2:
G 1‘‘ male
Length (mm):
59
Weight (kg):
0,303
Packaging
220
• Dimensions LxWxH (mm):
66 x 42 x 45
• Weight (kg):
0,313
• Packing unit:
1.0
Nozzle valve holders
Item number Technical data
Nozzle valve storage bracket
Material: steel
G 1‘‘ female
Lacquering: red, RAL 3011
100
Dimensions LxWxH (mm): 405 x 50 x 120
25,3
Weight (kg): 1,2944
aluminium
23 174
for barrells or tanks
Specification • Suitable for ZVD (23 171), ZVAD (23 176), (23 178) und ZVABD (23 168), (23 160) Features & Benefits • Shapely control nozzle storage bracket for mounting on container or tank with mounting material
I
Packaging • Packing unit:
1.0
221
HOSES
technic that leads
222
outperformed + outlast
J
223
HOSES
Technical data Measuring tolerance inside diameter (mm):
Specification • Low increase of volume under pressure ± 0,5
Measuring tolerance outside diameter (mm): ± 0,5 Material of inner hose and casing:
Perbunan (NBR)
Casing:
oil and weather resistant, abrasion-proof
Colour of casing:
black
Reinforcement:
stretch resistant textile reinforcement
Resistance:
diesel, gasoline and oil resistant
Temperature stability (°C):
-30 / +60
Working pressure max. (bar):
3
Test pressure (bar):
5
Burst pressure (bar):
5-7
Bend radius (mm):
≤ 150
224
• Ideal as hose for reels Packaging Packing unit:
1.0
Hoses for diesel, by the metre
Item number Technical data Nominal diameter (mm):
19
Inner diameter (mm):
4
Outside diameter (mm):
27
Weight (kg/m):
0,46
Hose for diesel-DN 19
80 371
Hose for diesel-DN 25
80 372
Packaging • Dimensions LxWxH (mm):
720 x 720 x 150
• Length of hose packing unit (m):
48,3
• Weigth of packing unit (kg): 22,4
Technical data Nominal diameter (mm):
25
Inner diameter (mm):
5
Outside diameter (mm):
35
Weight (kg/m):
0,8
J
Packaging • Dimensions LxWxH (mm):
700 x 700 x 150
• Length of hose packing unit (m):
24,2
• Weigth of packing unit (kg): 19,36
225
HOSES
Technical data
Specification
Connection 1:
G 1‘‘ male
• Marking: Acc. to DIN
Connection 2:
G 1‘‘ female with sleeve nut
• Low increase of volume under pressure
Inner diameter (inch):
3/4“
• Ideal as hose for reels
Inner diameter (mm):
19
Outside diameter (mm):
27
Features & Benefits
Material outer side of hose:
SBR is abrasion-resistant and weatherproof
• Hose connection by cap-nut screw connection
Material inner side of hose:
NBR swelling-resistant, lixiviation-resistant and freeze-resistant, not hardening, corresponds to material NBR 1 of EN 12115
Carcase:
two stretch resistant textile reinforcements
Colour of inner and outside material:
black
Low-pressure max. (bar):
0,6
Operating pressure max. (bar):
10
Material of connection parts:
AlSi 12 (sea water resistant)
Design of sealing:
O-ring
226
Packaging Packing unit:
1.0
Hoses for diesel with fittings fixed lengths
Item number Technical data
Hose for diesel-4 m
Total length (m):
4
Material of seal:
NBR 70
Weight (kg):
1,7
Technical data
G 1“ male-G 1“ female-DN 19
Hose for diesel-6 m
Total length (m):
4
Material of seal:
NBR 70
Weight (kg):
2,6
23 155 957
23 155 958
G 1“ male-G 1“ female-DN 19
J Technical data
Hose for diesel-10 m
Total length (m):
4
Material of seal:
NBR 70
Weight (kg):
4,8
23 157 957
G 1“ male-G 1“ female-DN 19
227
HOSES
Technical data
Specification
Connection 1:
G 1‘‘ male
• Marking: Acc. to DIN
Connection 2:
G 1‘‘ female with sleeve nut
• Low increase of volume under pressure
Inner diameter (inch):
1“
• Ideal as hose for reels
Inner diameter (mm):
25
Outside diameter (mm):
37
Features & Benefits
Material outer side of hose:
SBR is abrasion-resistant and weatherproof
• Hose connection by cap-nut screw connection
Material inner side of hose:
NBR swelling-resistant, lixiviation-resistant and freeze-resistant, not hardening, corresponds to material NBR 1 of EN 12115
Carcase:
two stretch resistant textile reinforcements
Colour of inner and outside material:
black
Low-pressure max. (bar):
0,5
Operating pressure max. (bar):
10
Material of connection parts:
AlSi 12 (sea water resistant)
Design of sealing:
O-ring
228
Packaging Packing unit:
1.0
Hoses for diesel with fittings fixed lengths
Item number Technical data
Hose for diesel-0,5 m
Total length (m):
0,5
Material of seal:
NBR 70
Weight (kg):
0,6
Technical data
G 1“ male-G 1“ female-DN 25
Hose for diesel-1,6 m
Total length (m):
1,6
Material of seal:
NBR 70
Weight (kg):
1,5
Technical data 2
Material of seal:
NBR 70
Weight (kg):
1,8
Technical data 4
Material of seal:
NBR 70
Weight (kg):
2,8
Technical data
J
6
Material of seal:
NBR 70
Weight (kg):
4,6
Technical data 10
Material of seal:
NBR 70
Weight (kg):
6,9
23 155 956
G 1“ male-G 1“ female-DN 25
Hose for diesel-10 m
Total length (m):
23 155 950
G 1“ male-G 1“ female-DN 25
Hose for diesel-6 m
Total length (m):
23 158 959
G 1“ male-G 1“ female-DN 25
Hose for diesel-4 m
Total length (m):
23 156
G 1“ male-G 1“ female-DN 25
Hose for diesel-2 m
Total length (m):
23 154
23 157 950
G 1“ male-G 1“ female-DN 25
229
HOSES
Technical data
Specification
Connection 1:
G 1‘‘ male
• Marking: Acc. to DIN
Connection 2:
G 1‘‘ male
• Low increase of volume under pressure
Inner diameter (inch):
3/4“
• Ideal as hose for reels
Inner diameter (mm):
19
Outside diameter (mm):
27
Packaging
Material outer side of hose:
SBR is abrasion-resistant and weatherproof
Packing unit:
Material inner side of hose:
NBR swelling-resistant, lixiviation-resistant and freeze-resistant, not hardening, corresponds to material NBR 1 of EN 12115
Carcase:
two stretch resistant textile reinforcements
Colour of inner and outside material:
black
Low-pressure max. (bar):
0,6
Operating pressure max. (bar):
10
Material of connection parts:
AlSi 12 (sea water resistant)
Material of seal:
NBR 70
Design of sealing:
O-ring
230
1.0
Hoses for diesel with fittings fixed lengths
Item number Technical data
Hose for diesel-4 m
Total length (m):
4
Weight (kg):
1,6
Technical data
G 1“ male-G 1“ male-DN 19
Hose for diesel-8 m
Total length (m):
8
Weight (kg):
2,9
23 155 953
23 155 966
G 1“ male-G 1“ male-DN 19
J
231
ACCESSORIES
technic that leads
232
outperformed + outlast
K
233
ACCESSORIES
Item number 23 209
Diesel in-line filter
Technical data
30 μm-100 l/min-G 1 1/2“ fem
Connection:
G 1 1/2‘‘ female
Flow capacity max. (l/min):
100
Working pressure max. (bar):
3,4
Mesh width (μm):
30
Total absorbed water (ml):
130
Dimensions LxWxH (mm):
98 x 98 x 140
Weight (kg):
0,54
Specification • Filters particles >30 μm • Absorbs water up to 130 ml • Sealings with grease pre-lubricated Packaging • Packing unit:
23 290
1.0
Diesel in-line filter
Technical data
10 μm-60 l/min-G 1 1/2“ fem
Connection:
G 1 1/2‘‘ female
Flow capacity max. (l/min):
60
Mesh width (μm):
10
Dimensions LxWxH (mm):
98 x 98 x 220
Weight (kg):
0,6
Packaging • Packing unit:
23 291
1.0
Diesel in-line filter
Technical data
10 μm-100 l/min-G 1 1/2“ fem
Connection:
G 1 1/2‘‘ female
Flow capacity max. (l/min):
100
Mesh width (μm):
10
Dimensions LxWxH (mm):
98 x 98 x 140
Weight (kg):
0,54
Packaging • Packing unit:
234
1.0
Filters
Item number Technical data
Filter accessories
Connection:
G 1 1/2‘‘ female
Flow capacity max. (l/min):
100
Working pressure max. (bar):
3,4
Mesh width (μm):
30
Total absorbed water (ml):
130
Dimensions LxWxH (mm):
98 x 98 x 140
Weight with accessories (kg):
1,36
23 810
for DIESELFIxx / DIESELMAxx
Specification • Diesel-exchange filter, 30 μm (23 209) • Adapter, G 1" female, G 1" female, G 1 1/2" male (23 207) • Swaged coupling (23 218) • Swivel joint (19 625) • Angle 90°, G 1‘‘ m, G 1‘‘ m (85 370 777)
K
• O-ring 29 x 2,5 mm - NBR 70 (89 111) Features & Benefits • The diesel exchange-filter filters out particles exeeding 30 μm and absorbs water up to a total volume of 130 ml. Packaging • Packing unit:
1.0
Technical data
Plastic in-line filter
Material:
PA and brass
Material of strainer:
stainless steel
Mesh width (μm):
30
Dimensions LxWxH (mm):
122 x 90 x 50
Weight (kg):
0,180
23 198
G 1“ fem-G 1“ fem
Specification • For assembly of suction lines, with connecting thread male Packaging • Packing unit:
1.0
235
ACCESSORIES Adapters for filters
Item number 23 206
Adapter Al-filter-2 x M 6
Technical data
G 1“ fem-G 1“ fem-G 1“ male
Connection on both ends:
G 1‘‘ female
Connection filter, UNF 16:
1
Quantity of fastening screw threads:
2
Fastening screw thread:
2xM6
Design of thread:
Brass sockets
Material of adpter:
AlSi 12
Installation length (mm):
100
Dimensions LxWxH (mm):
98 x 76 x 71,5
Weight (kg):
0,4
Packaging • Packing unit:
23 207
Adapter Al-filter
1.0
Technical data
G 1“ fem-G 1“ fem-G 3/2“ male Connection on both ends:
G 1‘‘ female
Connection filter, UNF 16:
1 1/2“
Material of adpter:
AlSi 12
Installation length (mm):
100
Dimensions LxWxH (mm):
100 x 89 x 80
Weight (kg):
0,343
Packaging • Packing unit:
236
1.0
K
237
ACCESSORIES
Technical data
Specification
Connection 1:
G 1‘‘ female
Connection 2:
G 2‘‘ male, drum adapter
• Galvanized connection angle spout 1", annealed cast iron (89 883) • Drum adapter 2" male (19 526) • Suction tube 1" with double-ended threads (03 346) • Foot valve with filter (19 890) Packaging Packing unit:
238
1.0
Suction tubes
Item number Technical data Length (mm):
Suction tubeG1“ fem-G2“ male 960
SRL 860-200/220 l container
Technical data Length (mm):
23 177
Suction tubeG1“ fem-G2“ male 1400
23 177 950
SRL 1250 for tanks
Specification • Socket 1" annealed cast iron (04 395) • Suction tube 1" with double-ended threads (03 348)
K Technical data Length (mm):
Suction tubeG1“ fem-G2“ male 1700
23 177 952
SRL 1700 for tanks
Specification • Socket 1" annealed cast iron (04 395) • Suction tube 1" with double-ended threads (03 349)
239
ACCESSORIES
Technical data
Specification
Connection 1:
G 1‘‘ female
Connection 2:
G 2‘‘ male, drum adapter
• Discharge hose for diesel-2 m-G 1" male-G 1" female-DN 25 (23 158 959) • Galvanized connection angle spout 1", annealed cast iron (89 883) • Drum adapter 2" male (19 526) • Suction tube 1" with double-ended threads (03 346) • Socket 1" annealed cast iron (04 395) • Suction tube 1" with double-ended threads (03 348) • Foot valve with filter (19 890) Packaging Packing unit:
240
1.0
Suction tubes with connection hose
Item number Technical data Length (mm):
Suction setG1“ fem-G2“ male 1250
Technical data Length (mm):
SRL 1250 for tanks
Suction setG1“ fem-G2“ male 1600
23 177 953
23 177 954
SRL 1600 for tanks
K
Technical data Length (mm):
Suction setG1“ fem-G2“ male 1650
23 177 955
SRL 1650 for tanks
241
ACCESSORIES Foot valves and suction filters
Item number 19 890
Foot valve with strainer
Technical data
G 1“ fem
Connection:
G 1‘‘ female
Material of valve sealing:
brass
Materials of parts in contact with liquid:
PA 6, 1.7102, 1.4021, HDPE, galvanized sheet steel
Mesh width (mm):
0,81
Dimensions LxWxH (mm):
48 x 48 x 115
Weight (kg):
0,3
Specification • With long thread • Back-flow valve (19 892) • Suction filter (23 180) Packaging • Packing unit:
19 892
1.0
Check valve
Technical data
G 1“ fem-G 1“ fem
Connection on both ends:
G 1‘‘ female
Overall length (mm):
58,5
Operating pressure max. (bar):
16
Material:
brass
Media:
oils, water
Dimensions øxL (mm):
44 x 59
Weight (kg):
0,22
Packaging • Packing unit:
23 180
1.0
Suction strainer
Technical data
G 1“ male
Connection:
G 1‘‘ m
Material of strainer:
steel, galvanized
Mesh width (mm):
0,81
Dimensions LxWxH (mm):
40 x 40 x 55
Weight (kg):
0,156
Packaging • Packing unit:
242
1.0
Swivel joints
Item number Technical data
Swivel DN 19
Connection 1:
G 1‘‘ female
Connection 2:
G 3/4‘‘ male
Length (mm):
62,2
Nominal pressure (bar):
5
19 621
G 3/4“ male-G 1“ fem
Materials of gaskets in contact with liquid O-ring:
NBR 70
Flat gasket:
FKM (Viton®)
Weight (kg):
0,2878
Specification • To suit automático control guns for diesel Packaging • Dimensions LxWxH (mm):
71 x 47 x 47
• Weight (kg):
0,2978
• Packing unit:
1.0
Technical data
K
Swivel DN 19
Connection 1:
G 1‘‘ female
Connection 2:
G 1‘‘ m
Length (mm):
59
Weight (kg):
0,303
19 625
G 1“ male-G 1“ fem
Packaging • Dimensions packaging LxWxH (mm):
66 x 42 x 45
• Weight (kg):
0,313
• Packing unit:
1.0
243
ACCESSORIES Barrel screw mountings
Item number 19 524
Drum adapter
Technical data
G 2“ m-G 1“ m
Connection 1:
G 2‘‘ male
Connection 2:
G 1‘‘ m with sealing ring
Connection 3:
G 1‘‘ female
Material:
aluminium
Weight (kg):
0,354
Specification • For container with G 2“ inside threads Packaging
244
• Dimensions LxWxH (mm):
100 x 100 x 60
• Weight (kg):
0,354
• Packing unit:
1.0
Nozzle valve holder
Item number Technical data
Nozzle valve storage bracket
Material:
steel
Lacquering:
red, RAL 3011
Dimensions LxWxH (mm):
405 x 50 x 120
Weight (kg):
1,2944
23 174
for barrells or tanks
Specification • Suitable for ZVD (23 171), ZVAD (23 176), (23 178) and ZVABD (23 168), (23 160) Features & Benefits • Shapely control nozzle storage bracket for mounting on container or tank with mountingmaterial Packaging • Packing unit:
1.0
K
245
ACCESSORIES Fittings
Item number 23 225
23 226
23 229
23 218
23 225 950
23 140 950
Positioning fitting
Packaging
NW 25-G 1“ fem-G 1“ fem
• Packing unit:
Positioning fitting
Packaging
left-NW 25-AlG1“ fem-G1“ fem
• Packing unit:
Positioning fitting
Packaging
G 3/4“ male-G 1“ fem
• Packing unit:
Swaged coupling-Al
Packaging
G 1“ male-G 1“ fem-NW 25
• Packing unit:
Positioning fitting
Packaging
NW 25-G 1“ fem-G 1“ fem
• Packing unit:
Hose fittings-set-DN 19
Technical data
60° cone-G 1“ fem-SW 36
Dimensions LxWxH (mm):
100 x 30 x 45
Weight (kg):
0,091
1.0
1.0
1.0
1.0
1.0
Specification • Crimp nipple-GD AlSi 12-DN 15,2-60° sealing head (85 360) • Crimp sleeve DN 19 - steel - galvanized, GVZ (85 362) • sleeve nut G 1" female - SW 36 - GD AlSi 12 (85 365) Packaging • Packing unit:
246
1.0
Press type fittings for diesel hoses
Item number Technical data Dimensions LxWxH (mm):
73 x 38 x 56
Weight (kg):
0,073
Hose fittings-set-DN 19
23 140 952
Hose fittings-set-DN 25
23 141 950
Specification • Crimp nipple-GD AlSi 12-DN 15,2 - 60° sealing cone-G 1"-SW 36 (85 359) • Crimp sleeve DN 19 - steel - galvanized, GVZ (85 362) • O-ring 29 x 2,5 mm - NBR 70 (89 111) Packaging • Packing unit:
1.0
Technical data Dimensions LxWxH (mm):
92 x 41,5 x 49
Weight (kg):
0,106
60° cone-G 1“ fem-SW 36
K
Specification • Crimp nipple-GD AlSi 12-DN 20,2 - 60° sealing cone (85 364) • Crimp sleeve DN 25 - steel - galvanized, GVZ (85 366) • Sleeve nut G 1" female - SW 36 GD AlSi 12 (85 365) Packaging • Packing unit:
1.0
Technical data
Hose fittings-set-DN 25
Dimensions LxWxH (mm):
77 x 41,5 x 56
Weight (kg):
0,093
23 141 952
60° cone-G 1“ male-SW 36
Specification • Crimp nipple-GD AlSi 12-DN 20 - 60° sealing cone-G 1"-SW 36 (85 363) • Crimp sleeve DN 25 - steel - galvanized, GVZ (85 366) • O-ring 29 x 2,5 mm - NBR 70 (89 111) Packaging • Packing unit:
1.0
247
ACCESSORIES Fittings
Technical data
Specification
Connection 1:
G 1‘‘ m
• 1 cap nut DN 19 / DN 25 (85 365)
Connection 2:
G 1‘‘ female with sleeve nut
Wrench size nozzle:
36
• 2 thread clips, with 9 mm , 25 - 40 mm, acc. to DIN 3017 (23 182)
Wrench size cap nut:
36
Material of connection parts:
AlSi 12 (sea water resistant)
Seal material:
NBR
• With the mounting set any hose can be equiped with all kind of fittings
Design of sealing:
O-ring
• Any length of hose available
Features & Benefits
• Hose connection by cap-nut screw connection Packaging Packing unit:
248
1.0
Press type fittings for diesel hoses
Item number Specification
Hose fittings-set-DN 19
• 1 threaded nozzle G 1‘‘ m, DN 19 (85 359)
G 1“ male-G 1“ fem-60° DK
23 140
• 1 hose insert with sealing cone G 1‘‘ female, DN 19 (85 360)
Specification
Hose fittings-set-DN 25
• 1 threaded nozzle G 1‘‘ m, DN 25 (85 363)
G 1“ male-G 1“ fem-60° DK
23 141
• 1 hose insert with sealing cone G 1‘‘ female, DN 19 / DN 25 (85 365)
K
249
ACCESSORIES Fittings
Item number 85 393
Nipple-GD AlSi 12DN 15,2
Technical data
60° cone - G 1“ - SW 36
Dimensions ø x L (mm):
41,6 x 56
Weight (kg):
0,043
Packaging • Packing unit:
85 360
1.0
Nipple-GD AlSi 12DN 15,2
Technical data
60° cone
Material:
Al Cu4 Pb Mg Mn - 3.1645
Dimensions ø x L (mm):
29,5 x 45
Weight (kg):
0,023
Packaging • Packing unit:
85 359
1.0
Nipple-GD AlSi 12DN 15,2
Technical data
60° cone - G 1“ - SW 36
Material:
GD-AlSi12 3.2582
Dimensions ø x L (mm):
41,6 x 52
Weight (kg):
0,042
Packaging • Packing unit:
85 364
1.0
Nipple-GD AlSi 12DN 20,2
Technical data
60° cone
Material:
aluminium
Dimensions ø x L (mm):
29,5 x 49
Weight (kg):
0,023
Packaging • Packing unit:
250
1.0
Press type fittings for diesel hoses
Item number Technical data
Nipple-GD AlSi 12DN 20,2
Material:
GD-AlSi12 3.2582
Dimensions ø x L (mm):
41,6 x 56
Weight (kg):
0,048
85 363
60° cone - G 1“ - SW 36
Packaging • Packing unit:
1.0
Technical data
Cap nut-G 1“ fem-SW 36
Material:
Al Cu4 Pb Mg Mn - 3.1645
Dimensions LxWxH (mm):
41,6 x 41,6 x 23
Weight (kg):
0,034
85 365
Packaging • Packing unit:
K
1.0
Technical data
O-ring-NBR 70
Indication:
O-ring
Material:
NBR 70
Dimensions (mm):
29 x 2,5
Weight (kg):
0,0039
89 111
29 x 2,5 mm
Packaging • Packing unit:
1.0
Technical data
O-ring-FKM 80
Indication:
O-ring
Material:
FKM 80
Dimensions (mm):
29 x 2,5
Weight (kg):
0,001
89 111 878
29 x 2,5 mm
Packaging • Packing unit:
1.0
251
ACCESSORIES Fittings
Item number 00 928
AdapterG 3/4“ male-G1/2“ male
Technical data
60° cone fem-SW 32
Dimensions ø x L (mm):
37 x 37,5
Weight (kg):
0,039
Packaging • Packing unit:
00 926
1.0
AdapterG 3/4“ male-G 3/4“ male
Technical data
60° cone fem-SW 32
Dimensions ø x L (mm):
37 x 37,5
Weight (kg):
0,038
Packaging • Packing unit:
85 358
1.0
Adapter G 1“ male - G 1“ male
Technical data
60° cone female-SW 37
Dimensions ø x L (mm):
40,5 x 33,8
Weight (kg):
0,141
Material:
Al Cu4 Pb Mg Mn - 3.1645
Packaging • Packing unit:
85 369
Adapter-Al-G 1“ male3/4“ male
Technical data
60° cone female-SW 36
Material:
1.0
Al Cu4 Pb Mg Mn - 3.1645
Packaging • Packing unit:
88 412
Adapter 1/2“-1/2“ maleSW 27-L 34
Packaging • Packing unit:
252
1.0
1.0
Adapters
Item number Packaging • Packing unit:
Adapter G 1“-1“-NPT
83 144
Threaded nipple-Al-
89 070
1.0
Packaging • Packing unit:
83 143
1.0
Packaging • Packing unit:
Adapter G 3/4“-1“-NPT
1.0
G1“ female -G1“ male-L=30,3
K Packaging • Packing unit:
Threaded nipple-Al1.0
Technical data
G1“ female-G1“ male-L=60,3
Adapter 90°-Al-DN 19
Connection 1:
G 1‘‘ m, 60° sealing cone
Connection 2:
G 1‘‘ m, 60° sealing cone
Nominal width:
DN 19
Material:
GD-AlSi12 3.2582
Dimensions LxWxH (mm):
61 x 61 x 41,5
Weight (kg):
0,0906
89 071
85 370 777
G 1“ male-G 1“ male-DK 60°
Packaging • Packing unit:
1.0
253
ACCESSORIES Fittings
Item number 23 217
Counter nut
Technical data
G 2“ female - AF 75mm aluminium
Indication:
Counter nut
Thread:
2“ i
Wrench size (SW) (mm):
75
Material:
Alu
Material:
ZnAl5Cu1 ZL0410
Packaging • Packing unit:
01 039
1.0
O-Ring-NBR 70-70x2
Technical data
G 1“ male-Ø 31,8 mm male
Indication:
O-ring
Dimensions (mm):
70 x 2
Material:
NBR 70
Weight (kg):
0,0024
Packaging • Packing unit:
254
1.0
Special connectors
K
255
ACCESSORIES
Specification
Technical data Connection:
G 1" i
• Hose quick coupling for use in hose lines with high flow rates
Wrench size (SW) (mm):
37
Weight (g):
450
• Relatively low flow resistance due to largely dimensioned openings
Weight (lb):
0,99
Dimensions LxW (mm):
42 x 140
Dimensions LxB (inch):
1,65 x 5,51
Temperature range (°C):
-20 / +60
Temperature range (°F):
-4 / +140
• Recessed grips for better handling when disconnecting the hoses
Approved media:
Diesel, fuel oil, lubricating oils
• Corrosion-resistant, nickel-plated surface
Materials
Features & Benefits
Packaging
Seals:
NBR
Body:
Steel, chemically nickel-plated
Cap:
PA
Cover:
Sponge rubber
256
• Sponge rubber cover cap to avoid contaminations
Packing unit:
1.0
Special connectors
Item number Quick coupling
23 125
for diesel hose-G 1â&#x20AC;&#x2DC;â&#x20AC;&#x2DC; female
K
257
ACCESSORIES
Item number 19 746
Discharge hoseG 1/2“ male-pipe
Technical data
90°-with anti-drip coupler
Total length (mm):
280
Connection:
G 1/2‘‘ male
Material of hose:
NBR
Dimensions LxWxH (mm):
280 x 110 x 25
Weight (kg):
0,273
Specification • Discharge hose with 90° angle and manual non-drip nozzle Features & Benefits • Acc. to DIN 20 021 (EN 854) Packaging • Packing unit:
19 748
1.0
Anti-drip coupler
Technical data
SPF 2 x 8,8-G 1“ fem-10°
Connection:
G 1/4‘‘ female
Outside diameter (mm):
12
Material:
brass
Dimensions øxL (mm):
20 x 55
Weight (kg):
0,044
Specification • Manual shut-off Packaging • Packing unit:
258
1.0
Accessories for volume meters
Item number Technical data
Swivel joint
Connection 1:
G 1/2‘‘ female
Connection 2:
G 1/2‘‘ male
Length (mm):
51,8
Nominal pressure (bar):
70
Dimensions øxL (mm):
29 x 52
Weight (kg):
0,126
19 616
G 1/2“ fem-G 1/2“ male
Specification • For hose end meters and filling valves Packaging • Packing unit:
1.0
K
259
ACCESSORIES
Packaging
Technical data Connection 2:
G 3/4'' male
Length, male thread (mm):
18
Length, female thread (mm):
16
Inner diameter (mm):
14
Field of application:
oils
Operating pressure max. (bar):
60
Wrench size (SW) (mm):
36
Materials Basic body:
steel, galvanized
Seals:
NBR
Locking ring:
Steel, bright
260
Packing unit:
1.0
Accessories for volume meters
Item number Technical data
Swivel joint
Connection 1:
G 1/2‘‘ female
Weight (kg):
0,27
Technical data
G 1/2“ fem-G 3/4“ male
Swivel joint
Connection 1:
G 3/4‘‘ female
Weight (kg):
0,24
19 613
19 617
G 3/4“ fem-G 3/4“ male
K
261
ACCESSORIES
Item number 19 930
Discharge hose-straight
Technical data
manual shut-off-AMS
Total length (mm):
333
Conexión:
G 3/4'' male
Inside diameter of hose (mm):
20
Wrench size (SW) (mm):
32
Outside diameter (mm):
34,5
Flow capacity max. (l/min):
100
Weight (kg):
0,68
Specification • Anti-drip nozzle, manual shut-off (19 932) Packaging • Packing unit:
262
1.0
Accessories for volume meters
Item number Colour plate-silverRAL 9006
19 935
Colour plate-redRAL 3001
19 936
Colour plate-blueRAL 5005
19 937
Colour plate-greenRAL 6032
19 938
Colour plate-yellowRAL 1003
19 939
K
263
CONTENT sorted by item numbers
Art.-Nr.
264
Seite
Art.-Nr.
Seite
Art.-Nr.
Seite
Art.-Nr.
Seite
00 926
252
23 058
165
23 177 950
239
23 404
15
00 928
252
23 059
165
23 177 952
239
23 404 002
17
01 039
254
23 066
180
23 177 953
241
23 405
15
18 115
199
23 067
165
23 177 954
241
23 405 002
19
19 524
244
23 068
180
23 177 955
241
23 406
21
19 613
261
23 069
179
23 178
211
23 406 002
23
19 616
259
23 069 950
179
23 180
242
23 407
21
19 617
261
23 070 020
73
23 190
195
23 407 002
25
19 621
220
23 070 021
73
23 192
201
23 430
11
19 621
243
23 070 022
73
23 198
235
23 433
13
19 625
220
23 070 023
73
23 200
157
23 494
163
19 625
243
23 125
257
23 206
236
23 495
163
19 692
191
23 140
249
23 207
236
23 499
161
19 692 691
193
23 140 950
246
23 209
234
23 510 001
97
19 693
191
23 140 952
247
23 217
254
23 510 390
97
19 693 691
193
23 141
249
23 218
246
23 510 396
99
19 694
191
23 141 950
247
23 225
246
23 510 397
99
19 694 691
193
23 141 952
247
23 225 950
246
23 510 398
97
19 698
185
23 154
229
23 226
246
23 510 447
99
19 698 950
185
23 155 950
229
23 229
246
23 510 951
97
19 718
215
23 155 953
231
23 287
203
23 510 955
99
19 718 954
215
23 155 956
229
23 287 870
149
23 510 957
101
19 746
258
23 155 957
227
23 290
234
23 510 960
107
19 748
258
23 155 958
227
23 291
234
23 510 961
107
19 890
242
23 155 966
231
23 295
205
23 511 001
103
19 892
242
23 156
229
23 295 870
151
23 511 390
103
19 915
187
23 157 950
229
23 295 870
205
23 511 392
105
19 915 950
187
23 157 957
227
23 298
201
23 511 393
105
19 915 951
187
23 158 959
229
23 321
41
23 511 398
103
19 918
217
23 160
213
23 322
41
23 511 953
103
19 918 950
217
23 161
208
23 337
41
23 511 955
105
19 918 956
217
23 161 878
148
23 370
57
23 511 959
105
19 925
189
23 168
213
23 370 001
57
23 511 960
109
19 928
219
23 171
209
23 371
61
23 511 961
109
19 935
263
23 171 960
148
23 371 001
61
23 513
65
19 936
263
23 174
221
23 372
59
23 513 001
65
19 937
263
23 174
245
23 372 001
59
23 513 002
65
19 938
263
23 176
211
23 373
63
23 513 011
65
19 939
263
23 177
239
23 373 001
63
23 513 100
69
Art.-Nr.
Seite
Art.-Nr.
Seite
Art.-Nr.
Seite
Art.-Nr.
Seite
23 513 101
69
23 721
123
23 937
79
36 716
177
23 513 102
69
23 724
123
23 938
81
36 717
177
23 513 111
69
23 727
123
23 947
79
36 720
177
23 515
67
23 730
35
23 948
81
36 722
177
23 515 001
67
23 731
125
25 180
153
36 730
178
23 515 002
67
23 731 932
127
25 181
153
36 731
178
23 515 011
67
23 731 939
129
25 185
155
61 501
43
23 515 100
71
23 734
125
25 186
155
61 503
43
23 515 101
71
23 737
125
25 190
157
61 505
43
23 515 102
71
23 737 932
127
25 191
157
61 507
43
23 515 111
71
23 737 939
129
25 223 001
139
61 509
43
23 517
111
23 740
131
25 224 001
139
61 550
45
23 517 086
93
23 741
131
25 225 001
139
61 560
47
23 517 087
93
23 742
131
25 226 001
143
61 660
49
23 517 090
93
23 805
115
25 227 001
143
80 371
225
23 517 100
111
23 810
235
25 228 001
143
80 371 878
157
23 517 824
111
23 820
195
25 233 001
141
80 372
225
23 517 825
111
23 823
150
25 234 001
141
80 828
117
23 519
113
23 823
197
25 235 001
141
83 143
253
23 519 088
95
23 829
195
25 236
145
83 144
253
23 519 089
95
23 901
31
25 280
51
83 324
157
23 519 092
95
23 901 008
33
25 281
53
83 396
157
23 519 093
95
23 902
31
25 282
53
85 358
252
23 519 100
113
23 902 008
33
25 333
147
85 359
250
23 519 824
113
23 905
27
25 334
147
85 360
250
23 519 825
113
23 906 006
29
29 802
156
85 363
251
23 631
37
23 911
83
36 700
169
85 364
250
23 632
37
23 912
85
36 701
169
85 365
251
23 633
37
23 917
85
36 702
174
85 369
252
23 634
37
23 917 008
89
36 703
174
85 370 777
253
23 643
39
23 918
87
36 704
171
85 393
250
23 644
39
23 918 008
91
36 705
175
88 412
252
23 645
39
23 921
83
36 706
171
89 070
253
23 646
39
23 922
85
36 707
173
89 071
253
23 710
35
23 927
85
36 708
173
89 111
251
23 711
121
23 927 008
89
36 710
175
89 111 878
251
23 714
121
23 928
87
36 712
176
23 717
121
23 928 008
91
36 714
176
23 720
35
23 931
79
36 715
181
L
265
PRODUCTS 2016
www.fmtag.com
90490 932 A802 GB
Fluid Management Technologies Swiss AG • Gewerbestraße 6 • 6330 Cham | Schweiz Tel. +41 41 712 05 37 • Fax +41 41 720 26 21 • info@fmtag.net