2015-2016 CLAS EQUIPMENT general catalogue by Christian Taraschi

Tools and Men...

1996 2016 RIGOUR â&#x20AC;¢

COMPETITIVENESS

BOLDNESS

CONFIDENCE

ÂŠ CrĂŠdit photo : FCG

In today's society we take for granted that everything must go quickly and that things must be done properly. With this in mind we put everything in place to offer our clients a complete product range to resolve the majority of the mechanical problems they encounter. We strive to combine technical expertise with esponsiveness and advice. Our ambition? That the essential remains a matter of relationship between Menâ&#x20AC;Ś

* Strength & Pride - Main Partner

LIGHTING RECHARGEABLE WIRELESS LIGHTING WIRED LIGHTING BATTERY POWERED LIGHTING

5 -18

GENERAL TOOLS HEATER WORKSHOP HAND TOOLS DOORS OPENING STRIKING TOOLS

CONSUMABLES EXTRACTION MEASURING

19 - 64

TESTING TOOLS BATTERY ELECTRONIC LPG HEADLIGHT ADJUSTMENT AIRCON COOLING SYSTEM

BRAKING DRAINING FUEL VIDEOSCOPE ENGINE INJECTOR

65 - 112

TECHNICAL TOOLS INJECTOR PLUG ENGINE CLUTCH CYLINDER HEAD EXHAUST STEERING ROD

BALL JOINT SILENT-BLOCK DRIVE SHAFT SHOCK ABSORBER BRAKING CLEANING WHEEL

113 - 246

WHEEL BALANCERS/TYRE CHANGERS WHEEL ALIGNMENT WHEEL BALANCER TYRE CHANGER

247 - 272

LIFTING & PRESSES EXTRACTION PRESSES PRESS ACCESSORIES CRANES ENGINE

PIT JACKS JACK STANDS JACKS

6 273 - 302

7 303 - 342

8 343- 354

9 355 - 380

10 381 - 410

BODY REPAIR HANDLING WELDING STRAIGHTENING PAINTING OTHER DOORS OPENING

PAINTLESS DENT REMOVAL BLASTING CLEANING PLASTIC WINDSCREEN

REELS ELECTRICAL WIRED LIGHTING AIR OIL - GREASE

PNEUMATIC TOOLS ACCESSORIES TIGHTNESS/RELEASE PRECISION TOOLS DRILLING

CUTTING BODY REPAIR AIR COMPRESSSORS

LUBRICATION & SPILL CONTAINMENT DRAINING LUBRICATION CLEANING SPILL CONTAINMENT

EXHAUST GAZ INHALATION EXHAUST

411 - 416 PRATICAL INFORMATIONS

417 - 448

INDEX NOTES CONVERSIONS LEGEND GTS

LIGHTING

1 2 3 4 5 6 7 8 9 10 11 6

CONTENTS RECHARGEABLE WIRELESS LIGHTING

WIRED LIGHTING

BATTERY POWERED LIGHTING

7 11 18

LIGHTING RECHARGEABLE WIRELESS LIGHTING

OE 0141 ULTRATHIN CORDLESS RECHARGEABLE PENLIGHT

New generation "Super Bright LED" penlight. Shock and hydrocarbon-resistant protective rubber structure.

NEW

3 • • • • • • • • •

12 LED SMD Batterie Li-ion 3.7V-2200mAh Light intensity 400 lumens Charge time : 4h Battery life : 4h Mains charger and cigarette-lighter charger + USB charger Base support Charge indicator Penlight dimensions: L.38xl.27xH325.mm

4 5 6 325mm

OE 0141C4 PACK OF 4 ULTRATHIN CORDLESS RECHARGEABLE PENLIGHT NEW

27mm

MORE INGRESS PROTECTION RATING 1ST digit: Solid particle protection 0 No protection 1 Protected against solid particles superior to 50mm 2 Protected against solid particles superior to 12mm 3 Protected against solid particles superior to 2,5mm 4 Protected against solid particles superior to1mm 5 Dust protected 6 Dust tight

2nd digit : Liquid ingress protection 0 No protection 1 Protected against dripping water 2 Protected against dripping water when tilted up to 15° from the vertical 3 Protected against spraying water when tilted up to 60° from the vertical 4 Protected against splashing water jets from any direction 5 Protected against water jets from any direction by a nozzle 6 Protected against powerful water jets from any direction 7 Protected against immersion 8 Protected against long-lasting immersion according to specified conditions

10 11 7

LIGHTING RECHARGEABLE WIRELESS LIGHTING

1 2 3

OE 0119 RECHARGEABLE PORTABLE LIGHT 5SMD+5LED 5 • • • • • • • •

Powerfull SMD technology Metallic hook Double lighting: 5 SMD front + 5 LED on top Lighting intensity: 180 lumens Charging time: 4.5h Battery life: 2.5h Battery 3.6V-1000mA Ni-mh Wall charger

120°

215mm

4 5 6

- Rubber covering - Charging plug integrated in the light body for a better protection against foreign matters

7 40mm

8 9 10 11 8

OE 0119C4 4 RECHARGEABLE PORTABLE LIGHTS 5SMD+5LED 5 (4 COLOURS) NEW

SA 1086 BATTERY CHARGER

SA 1018 GLASS COVER

For OE 0118/OE 0111/OE 0119

For OE 0118/OE 0117/OE 0119

LIGHTING RECHARGEABLE WIRELESS LIGHTING

OE 0168 RECHARGEABLE 120SMD LED LIGHT LAMP

NEW • • • • • • • •

Adjustable aluminium frame 111-180cm 180° light spread Battery: 3.7V 4400mAh Li-ion Light intensity: 750 lumens Charge time: 5.5h Battery Life: 3h Charger : 230V 1A Weight: 1kg

2 Version with neon p.11

OE 0291 RECHARGEABLE COB LED PROJECTOR • • • • • • • • • •

NEW

Aluminium body with rubber edge protection 180° nylon swivel stand COB LED 20W Battery: 11.1V 4400mAh Li-ion Light intensity: 2 modes (400-1800 lumens), 5700K Charge time: 5h Battery Life: 8h in 400Lm mode, 2h in 1800Lm mode Charger: 100-240V AC Dimensions: L.70xl.225xH.220 Weight: 1.8kg

5 6

OE 0170 RECHARGEABLE LED PROJECTOR New generation "Super Bright LED" projector Can be used outdoors, weatherproof.

190mm

OE 0180 TRIPOD PROJECTOR SUPPORT OE0170 For OE 0170/OE 0291

• • • • • •

30 LED SMD Battery Li-ion Light intensity : 1200 lumens Charge time : 5h Battery life : 4h Mains charger and cigarette-lighter charger

Mini. height 720mm Maxi. height 1300mm

7 8 9 10

0m m

Tilting mount

11 9

LIGHTING RECHARGEABLE WIRELESS LIGHTING

1 2

OE 0194 RECHARGEABLE PORTABLE LIGHT 2W+1W COB

Shock and hydrocarbon-resistant, protective rubber structure. This light is equipped with a strong magnet.

3 4

NEW

Charging indicator

• • • • • • • • •

Powerfull COB technology Magnetic belt clip Double lighting: 2W COB front+1W COB on top Lighting intensity: 200 lumens Charging time: 3h Battery life: 3h Battery lithium 2000mAh USB wall charger Dimensions : L.42.7xl.36.6xH.146.5mm

Reduced size

5 6 7 8

Charger+USB cable

OE 0167 RECHARGEABLE 68 LED SMD PORTABLE LIGHT

NEW

9 10 11 10

• • • • • • • •

180° light spread Battery: 3.7V 3300mAh Li-ion Light intensity: 500 lumens Charge time: 4.5h Battery Life: 3h Charger: 230V 1A Length: 50cm Weight: 320g

LIGHTING WIRED LIGHTING OE 0290 COB LED PROJECTOR 5

NEW • • • • • •

Aluminium body with rubber edge protection 180° nylon swivel stand COB LED 20W Light intensity: 1800 lumens, 5700K Dimensions: L.70xl.225xH.220 Weight: 1.7kg

1 2 3 4 5

OE 0067 ULTRA LIGHT FLUORESCENT RAMP

• • • • • •

Leaves your hands free while lighting the whole engine compartment Telescopic arms to attach it to the bonnet or roof to light the interior 5m H05RNF 2x1mm hydrocarbon-resistant cable Light intensity + 800 lumens Power 30W fluo strip light, do not heat. Strip light not available as spare part (see hypermarkets Ø26mm L.900mm)

Switch on/off

7 8

mm 1100 à 1800

Rechargeable version p.9

9 10 11 11

LIGHTING WIRED LIGHTING

1 2

OE 0042 NEON PORTABLE LIGHT 5

Ultra compact Energy saving Electronic control board in the grip

60 60

150

370

420

5 6 7

OE 0086 2 PIN FLUORESCENT STRIP LIGHT 11W 220V

SA 9042 GLASS COVER For OE 0042

For OE 0042/OE 0044/OE 0048/OE 0049

8 9 10 11 12

SA 9043 220V PLATE

SA 9008 HOOK

For OE 0042

For OE 0080/OE 0090/OE 0042

MORE EXTRACT FROM THE LABOUR CODE (France) According to the employment regulation, the only inspection lamps that can be used in rooms subject to labour code must comply with following standards: EN60598-2-8 (CEI 598-2-8) IP45 mini.

LIGHTING WIRED LIGHTING

OE 0045 PORTABLE LIGHT

• Electronic control board in the grip • Intense light • 5m VVF cable

24V

Plug not included

OE 0084 2 PIN FLUORESCENT STRIP LIGHT 11W 24V

2 3

For OE 0045

4 5

OE 0017 PORTABLE CAGE LIGHT 10

• • • • • •

E27 screw-type socket Cable length 10m 2x0.75mm2 H05WF 12V/24V/220V supply possible Bulb-free Domestic use

12-24-220V

6 7 8

EXTRACT FROM THE RoHS DIRECTIVE (EUROPE)

To enforce the European Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipments (commonly referred to as the Restriction of Hazardous Substances Directive or RoHS), the maximum permitted concentrations were fixed on August 18th, 2005 by an European commission decision (Published in the European Union Official Journal, L 214 dated August 19th, 2005 – 2005/618/CE. From July 1st, 2006, according to the RoHS directive requirements, producers (manufacturers, importers or distributors selling under their own brand) that launch on the market electric or electronic equipments must ensure that the following hazardous materials they could contain, doesn’t exceed the maximum permitted concentrations as follows, by weight of homogeneous material : Hazardous Substance…………………………………..……….Maximum values Cadmium (Cd)……………………………………………..…….100mg/kg 0,01% Lead (Pb) ………………………………………………...………1000mg/kg 0,01% Mercury (Hg) …………………………………………….……...1000mg/kg 0,01% Hexavalent chromium (Cr6+)…………………………………...1000mg/kg 0,01% Polybrominated biphenyls (PBB) ………………………………..1000mg/kg 0,01% Polybrominated diphenyl ether (PBDE) ………………………...1000mg/kg 0,01%

We certify that our electrical equipments (inspection lamps) comply with this directive.

9 10 11 13

LIGHTING WIRED LIGHTING

1 2 3

OE 0095 WIRED PORTABLE LIGHT 30 LED 30

Standards EN 60598-2-8 CEI 598-2-9

• • • • •

150 lumens Ultra compact Energy saving Electronic control board in the grip Cable H05 RNF 10m

4 OE 0093 WIRED FLUORESCENT HAND LAMP

This lamp has a lifetime 8 times longer than a traditional incandescent lamp. It does not get warm and has a high source of light.

7 8

• • • • •

SA 9228 220V PLATE

9 10 14

SA 9229 220V PLATE For OE 0095

Standards EN 60598-1-EN 60598-2-8-EN 60335-1 2006/95/CE-2004/108/CE-2002/95/CE

After-sales service at your disposal if you need it.

Ultra compact Energy saving

900 lumens Electronic control board Protected switch Rotative and adjustable hook Cable H05 RNF 10m

SA 9023 24V PLATE

For OE 0093

SA 9022 24V PLATE For OE 0094

For OE 0098

LIGHTING WIRED LIGHTING

OE 0098 WIRED PORTABLE LIGHT 30 LED 30

• • • • •

150 lumens Ultra compact Energy saving Electronic control board in the grip Cable H05 RNF 10m

2 Standards EN 60598-2-8 CEI 598-2-9

24V

4 5

OE 0094 WIRED FLUORESCENT HAND LAMP 10

This lamp has a lifetime 8 times longer than a traditional incandescent lamp. It does not get warm and has a high source of light.

• • • • •

900 lumens Electronic control board Protected switch Rotative and adjustable hook Cable H05 RNF 10m

Standards EN 60598-1-EN 60598-2-8-EN 60335-1 2006/95/CE-2004/108/CE-2002/95/CE

24V

Ultra compact Energy saving

SA 9003 HOOK

OE 0085 FLUORESCENT STRIP LIGHT 11W

For OE 0093/OE 0094/OE 0095/OE 0098

For OE 0093/OE 0094/OE 1225/OE 1314

SA 9004 GLASS COVER

SA 9280 16A 24V HYPRA SOCKET

7 8 9 10

For OE 0093/OE 0094/OE 0095/OE 0098

11 15

LIGHTING WIRED LIGHTING

OE 1360 NEON PORTABLE LIGHT CABLE REEL 15

OE 1317 PORTABLE CAGE LIGHT CABLE REEL 15

24V

12-24-220V

3 4 5 6 7

CABLE WINDER • Shock-resistant ABS case • Backstop pawl every 50cm • Swivelling mounting bracket • Cable: H05 RN-F-15m • Power supply cable: 1 m • IP rating: IP42

CABLE WINDER • Shock-resistant ABS case • Backstop pawl every 50cm • Swivelling mounting bracket • Cable: H05 RN-F-15m • Power supply cable: 1m • IP rating: IP42

PORTABLE LIGHT • Ergonomic grip in Moplen: Hydrocarbon, acid and solvent resistant • Strong-built switch • Steel-thread cage and zinc-plated steel reflector • Swivelling hook • IP rating : IP20 • E27 bulb cap 60W maxi (not supplied)

PORTABLE LIGHT • 900 lumens • Ergonomic grip: Hydrocarbon resistant • Integrated waterproof switch • SA1360: Bell cover+swivelling hook • IP rating : IP55 • OE0085: Neon 11W

Option: 4 other colours available

OE 1361 PORTABLE LIGHT TRANSFORMER CABLE REEL 15

8 9

CABLE WINDER • Shock-resistant ABS case • Backstop pawl every 50cm • Swivelling mounting bracket • Cable: H05 RN-F-15m • Power supply cable: 1 m • IP rating: IP42

Transformer 220-24V

PORTABLE LIGHT • Ergonomic grip: Hydrocarbon resistant • Integrated waterproof switch • SA1360: Bell cover+swivelling hook • IP rating : IP55 • OE0085: Neon 11W

10 11 16

Option: 4 other colours available

LIGHTING WIRED LIGHTING

OE 1314 PORTABLE NEON LIGHT CABLE REEL

CABLE WINDER • Shock-resistant ABS case • Backstop pawl every 50cm • Swivelling mounting bracket • Cable: H05 RN-F-15m • Power supply cable: 1m • IP rating: IP42

PORTABLE LIGHT • 900 lumens • Ergonomic grip: Hydrocarbon resistant • Integrated waterproof switch • SA1360: Bell cover+swivelling hook • IP rating: IP55 • OE0085: Neon 11W

3 4 Option: 4 other colours available

OE 1315 PORTABLE LED LIGHT CABLE REEL 30

CABLE WINDER • Shock-resistant ABS case • Backstop pawl every 50cm • Swivelling mounting bracket • Cable: H05 RN-F-15m • Power supply cable: 1m • IP rating: IP42

PORTABLE LIGHT • 150 lumens • IP rating: IP55 • Ultra compact • Energy saving • Electronic control board in the grip • Standards EN 60598-2-8 CEI 598-2-9

Option: 4 other colours available

SA 1310 220V PLATE

SA 1361 24V PLATE

SA 1360 GLASS COVER WITH HOOK

SA 1362 LOCK FOR GLASS COVER

For OE 1314

For OE 1360/OE 1361

For OE 1360/OE 1361/OE 1314

SA 0121 YELLOW FLASK

SA 0122 BLACK FLASK

SA 0123 RED FLASK

SA 0124 GREEN FLASK

For OE 1317/OE 1360/OE 1324/OE 1361/OE 1314/OE 1320/OP 0088

9 10 11 17

LIGHTING BATTERY POWERED LIGHTING

1 2 3

OE 1014 9 LED ALUMINIUM MINI LAMP 9

• 3 AAA 1.5V batteries included • Equiped with a 2 positions push button

Ø27mm

OE 1014 Per 12

OE 0128 PENLIGHT 6 SMD LED+MAGNET

NEW =

• • • • • •

Supplied with 3xAAA 1.5V batteries 6x0.5W SMD LED Light intensity: 250 Lumens, 6000K Aluminium body 180 degree swivel belt clip with magnet Dimensions: 158x16x30mm

The lamp is delivered with a cable protective case that can be used as a handle extension.

Bulb Ø2mm : SA1020

10 11 18

Push button

SA 1020 BULB For OE 1001

280mm

This high intensity flexible-arm lamp allows to inspect the hardly reachable areas thanks to its 5mm diameter and 27mm length flexible cable. Example of use: To control any dashboard element or the brake pads through the wheel rim...

400mm

OE 1001 FLEXIBLE-ARM LAMP 400mm

GENERAL TOOLS

CONTENTS

2 3

HEATER

WORKSHOP

HAND TOOLS

DOORS OPENING

4 5 6 7 8 9 10 11 20

STRIKING TOOLS

CONSUMABLES

EXTRACTION

MEASURING

21 23 30 53 54 57 61 63

GENERAL TOOLS HEATER

EG 2050 40kW DIRECT DIESEL OIL WARM AIR GENERATOR 150 W

100% mobile heater : no need to connect it to a chimney flue.

Characteristics: • Metal structure painted with epoxy powder • Stainless steel fire box • Electronic flame check with photo-resistance • Safety thermostat for excess temperature • Suitable for open or semi open environments • Dimensions: 1125x450x620mm • Weight: 48kg • 40kW • 34.400kcal/h • 136.483BTU/h • Air outlet: 1750m3/h • Absorbed power: 150W • Power supply: 1ph-230V-50Hz • Consumption: 3.37kg/h • Capacity: 35L

Trolley-mounted

2 3 4 5

Fuel: fuel oil, diesel, kerosene or oil

EG 2060 48.5kW DIESEL FIRED SPACE HEATER WITH EXCHANGER 300 W

This mobile heater has been designed to heat wide spaces very quickly. Trolley-mounted Characteristics: • Metal structure painted with epoxy powder • Stainless steel combustion chamber • Electronic flame check with photo-resistance and equipment • Safety thermostat for excess temperature • Suitable for closed environments • Dimensions: 1700x560x1020mm • Weight: 103kg • 48.5kW • 41.280kcal/h • 165.486BTU/h • Air outlet: 1.900m3/h • Absorbed power: 300W • Power supply: 1ph-230V-50Hz • Consumption: 4kg/h • Capacity: 70L

Efficiency up to 90% Fuel: fuel oil, diesel, kerosene or oil

6 7 8 9 10 11 21

GENERAL TOOLS HEATER

2 3 4 5

EG 2070 40kW INFRARED HEATER 100 W

Mobile infrared heater that works independently from the ambiant temperature, air flows or area size. Economic and appreciated by the users.

Characteristics: • Metal and tubular structure painted with epoxy powder • Direct heat flow without air moving • Odourless combustion • Ceramic fibre combustion chamber • Electronic flame check with photo-resistance • Post ventilation device for combustion chamber cooling • Thermoplastic tank • Dimensions: 1200x800x1060mm • Weight: 63kg • 40kW • 34.400kcal/h • 136.483BTU/h • Absorbed power: 100W • Power supply: 1ph-230V-50Hz • Consumption: 3.3kg/h • Capacity: 55L • Fuel pressure: 13bar/188.5PSI

6 7 8 Fuel: fuel oil, diesel, kerosene or oil

9 10 11 22

Trolley-mounted

GENERAL TOOLS WORKSHOP

EG 0018 REINFORCED 6-WHEEL INSPECTION CREEPER Max.

130

• • • • •

Very durable rubber inspection trolley, oilproof.

Maximum load 130kg Reinforced steel tube frame Ø25mmx1.5mm thick 6 pivoting polyamide Ø50mm wheels L.980xW.440mmxH.50mm Weight 5kg

2 3 4

EG 0106 6-WHEEL BUCKET-SEAT INSPECTION CREEPER Max.

100

• • • • • •

Comes with 2 toolracks Carrying handle Hydrocarbon-proof material Dimensions: 100x48x11cm Wheel Ø: 60mm High-pressure washable

SA 3205 WHEEL

5 6 7

For EG 0106

8 OM 0099 TOOL-STORAGE STOOL Max.

150

Min. H 400mm Max. H 510mm

• Height-adjustable • 2 levels of tool storage • Lets you work on all low parts

10 11 23

GENERAL TOOLS WORKSHOP

Characteristics: • Drilling capacity: 25mm, 750W • Spindle travel: 85mm • Spindle nose taper: MT3 • Spindle speed range: 280-2380rpm • Number of speeds: 12 • Table rotation radius: 167mm • Table size: 290x290mm • Base size: 460x272mm

2 3 4

EG 0332 DRILL Ømax 25mm 750W 220V + VICE • • • • • • •

Morse taper: MT#3 Max distance spindle to table: 670mm Max distance spindle to base: 1100mm Column diameter: 80mm Input power: 230V Height: 1600mm Net weight: 84kg

EG 0333 DRILL Ømax 32mm 1100W 220V + VICE Characteristics: • Drilling capacity: 5 to 32mm, 1100W • Spindle travel: 120mm • Spindle nose taper: MT4 • Spindle speed range: 150-2450rpm • Number of speeds: 12 • Table rotation radius: 254mm • Table size: 360x360mm • Base size: 470x360mm

• • • • • • •

Supplied with vice and slide screws

Morse taper: MT#4 Max distance spindle to table: 480mm Max distance spindle to base: 1050mm Column diameter: 92mm Input power: 230V Height: 1710mm Net weight: 130kg

5 6 7

OM 4066 QUICK RELEASE BENCH VISE 150mm

OM 4068 PARALLEL HUB VICE 205mm FAST GRIP, TUBE GRIP

Releasable jaw system letting you immediately adjust to the hub.

Releasable jaw system, letting the operator immediatly adjust to the hub. • • • • • •

Jaw width: 205mm Jaw height: 22mm Opening: 260mm Interchangeable steel jaws Fast-grip Supplied with revolving base with 3 anchoring points (180x225mm) • Weight: 33kg

8 9 10 11 24

• • • • •

Jaw width: 150mm Jaw height: 20mm Opening: 180mm Interchangeable steel jaws Supplied with revolving base with 3 anchoring points • Weight: 18kg

EG 7050 SET OF 2 ALUMINUM BITS 150mm For jaws 150mm For OM 4066

GENERAL TOOLS WORKSHOP EG 0220 900W INDUSTRIAL BENCH GRINDER Ø200x32x32mm

• Adjustable protective screen with magnifying lens • Dual extractor vent • 900W • 2950 rpm

Comes with: • Grinding wheel grit 36 • Grinding wheel grit 60

4 EG 0221 BENCH GRINDER BRUSH For EG 0220

External Ø200mm Inner Ø13 to 32mm

EG 0270 VITRIFIED GRINDING WHEEL WHITE CORUNDUM 200x32x32mm GRIT 46

EG 0271 VITRIFIED GRINDING WHEEL WHITE CORUNDUM 200x32x32mm GRIT 60

NEW

For EG 0220

EG 0272 VITRIFIED GRINDING WHEEL GREY CORUNDUM 200x32x32mm GRIT 24

EG 0273 VITRIFIED GRINDING WHEEL GREY CORUNDUM 200x32x32mm GRIT 60

NEW For EG 0220

EG 0275 VITRIFIED GRINDING WHEEL GREEN CARBIDE 200x32x32mm GRIT 120

NEW For EG 0220

7 8

NEW For EG 0220

EG 0274 VITRIFIED GRINDING WHEEL GREEN CARBIDE 200x32x32mm GRIT 80

NEW For EG 0220

9 10 11 25

GENERAL TOOLS WORKSHOP

EG 0040 DRY AND WET VACUUM CLEANER 2x1000W 80

• • • • • • • • • • •

Inox tank mounted on a 4-wheel dolly 2 motors of 1000W each 80l tank Ø420mm Drain on 500mm tank Pressure: 21kPa Air flow: 55l/s Sound level: 73dB 220V 4m cable Power: 2000W Dimension (lenghtxdephtxheight): 540x595x940mm Weight: 25kg

3 4 5 Included accesories: • SA0442: thin tip with connector Ø42mm • SA0443: Ø60mm brush with connector Ø42mm • Ø42mm handle with accessory connector Ø37mm • SA0440: 2200mm flexible hose Ø42mm • SA0444: Ø37mm scraper • SA0445: Ø37mm brush lenght 600mm • SA0441: cloth filter

6 7 8 9

SA 0045 FRONT BRUSH ASSEMBLY WITH HOSE For EG 0040

10 11 26

2 swivelling wheels

GENERAL TOOLS WORKSHOP

EG 0338 PERFORATED PANEL TOOLS RACK 1500x900x30mm

EG 0339 PERFORATED PANEL TOOLRACK 2000x900x30mm

EG 0340 1500x175mm SHELF

For EG 0338

EG 0341 2000x175mm SHELF For EG 0339

EG 0343 30-PIECE PLASTIC HOOKS SET

EG 0342 30-PIECE METAL HOOKS SET

For EG 0338/EG 0339

3 sets of 10: • Hooks L.135mm • Hooks L.85mm • Hook and loops L.45mm

EG 0336 2m METAL WORKBENCH WOODEN TRAY

Max.

700

Weight: 120kg Dimensions: L.2000xW.700xH.900mm

EG 0335 1.5m METAL WORKBENCH WOODEN TRAY

Max.

700

Weight: 95kg Dimensions: L.1500xW.700xH.900mm

EG 0337 DRAWER

For EG 0335/EG 0336

500

170mm

600m

10 11 27

GENERAL TOOLS WORKSHOP

EG 0083 3 TRAY ROLLER CABINET Max.

2 3 4

270

• • • • • • • •

Overall size: 766x415x840mm Tray dimensions: 760x410x60mm 2 fixed castors Ø100mm 2 swivelling castors Ø100mm with side brakes 3pcs 2.5mm thick EVA protection Admissible load per shelf: 90kg Total admissible load: 270kg Weight: 15kg

EG 0084 3 DRAWERS/1 DOOR ROLLER CABINET Max.

360

5 6

• • • • • • • • • • • • •

Overall size: 688x459x858mm 2x75mm drawers and 1x154mm high drawer 604x395mm door cabinet 3xpairs full extension ball bearing slides Lockable (2keys) 2 fixed castors Ø125mm 2 swivelling castors with side brakes Ø125mm 3pcs 2.5mm thick EVA drawer liners 1pc 10mm thick EVA top mat Admissible load per drawers: 45kg Admissible load on tray: 120kg Total admissible load: 360kg Weight: 45kg

7 Drawers open fully

8 9 10

EG 0196 3 DRAWER ROLLER CABINET+150 TOOLS

OM 9127

Composition p.30

OM 9023

11 28

GENERAL TOOLS WORKSHOP

EG 0085 7 DRAWERS ROLLER CABINET

Max.

400

• • • • • • • • • • • • •

• Comes with a wooden plate and EVA foam

Overall size: 688x459x1035mm (height without wheels 858mm) 5x75mm drawers and 2x154mm high drawers 7xpairs full extension ball bearing slides Self lock function ABS handle drawer pulls Lockable 2 fixed castors Ø125mm 2 swivelling castors with side brakes Ø125mm 7pcs 2.5mm thick EVA drawer liners Admissible load per drawers: 45kg Admissible load on tray: 300kg Total admissible load: 400kg Weight: 67kg

2 3 4 5

- Auto return function - With lift and latch drawer retention

6 EG 0193 EG0093 7 DRAWERS ROLLER CABINET+150 TOOLS OM 9023

7 8 9

Composition p.30

OM 9127

10 11 29

GENERAL TOOLS HAND TOOLS

2 3 4 5 6

OM 9023 INSERT 23 PIECES • Set of combination chromed wrenches (8-9-10-11-12-13-14-15-16-17-19mm) • 1 flat head screwdriver 6x38mm • 1 groove pliers 240mm • 1 Philips screwdriver 2x38mm • 1 round tip pliers 200mm • 1 flat head screwdriver 5x75mm

9 10 11 30

1 1 1 1 1 1 1

universal pliers 180mm flat head screwdriver 6x100mm cutting plier 160mm flat head screwdriver 6x150mm flat head screwdriver 8x200mm Philips screwdriver 1x75mm Philips screwdriver 2x100mm Dimensions Insert: L560xW390xH40mm Weight: 4kg

OM 9127 INSERT 127 PIECES • 1 box tips (32 pieces) • 1 ratchet 1/2" • 1 articulated extension 1/2" (390mm) • 1 universal joint 1/2" • 1 extension 1/2" (125mm) • 1 extension 1/2" (250mm) • Set of 18 sockets 1/2" (10-11-12-13-14-15-16-17-18-19-20-2122-24-27-30-32-34mm) • Set of 7 E sockets 1/2" (E12-E14-E16-E18-E20-E22-E24) • Set of 7 deep sockets 1/2" (14-15-17-18-19-22-24mm) • Set of glow plug sockets 1/2" (16- 21mm)

• Set of 18 bits 5/16" • Set of 3 Hex wrenches (1.5-2-2.5mm) • 1 ratchet 1/4" • 1 screwdriver 1/4" • 1 universal joint 1/4" • 1 extension bar 1/4" (50mm) • 1 extension bar 1/4" (100mm) • 1 extension bar 1/4" flexible • Set of sockets 1/4" (4- 4.5- 5-5.5-6-7-8-9-10-11-12-13mm) • Set of 7 E sockets 1/4" (E4-E5-E6-E7-E8-E10-E11) • Set of 8 deep socket (6-7-8-9-10-11-12-13mm)

Insert Dimensions: L560xl390xH60mm Weight: 9kg

7 8

• • • • • • •

Dimensions inserts : L.390 x l.190 x H.60mm

OM 9204 INSERT INTERIOR–EXTERIOR CIRCLIP PLIERS 4 PIECES

OM 9011 HAMMER AND PUNCH SET 11PIECES

OM 9207 INSERT 6 HEX WRENCHES 7 PIECES H2-H2.5-H3-H4 L.100mm H5-H6-H8 L.150mm

GENERAL TOOLS HAND TOOLS

Dimensions inserts : L.390 x l.190 x H.60mm

OM 9004 INSERT PLIERS 4 PIECES

OM 9008 SCREWDRIVER INSERT 8 PIECES

OM 9007 TORX SCREWDRIVER INSERT 6 PIECES T10-T15T20-T25-T30 L.100mm T40 L.115mm

2 3

OM 9006 DOUBLE FLEXIBLE SOCKET WRENCH INSERT 6 PIECES

OM 9027 INSERT RATCHET 1/2" 27 PIECES

8 to 19mm

Sockets diameter from 10 to 32mm

OM 9048 INSERT RATCHET 1/4" 48 PIECES

5 6 7

OM 9078 INSERT SPECIAL TIPS 78 PIECES

OM 9013 COMBINATION WRENCH INSERT 13 PIECES

OM 9212 INSERT COMBINATION RATCHETING WRENCHES 12 PIECES

8-10-12-13-14-15-17-19mm 1/4"D. 3/8"D. 1/2"D. 8 to 22mm

9 10 11 31

GENERAL TOOLS HAND TOOLS

2 3

OM 2337 38 PIECES SOCKET BIT SET

Specific cavities for working on: injection pumps, oil changing, airbags, gearbox, brakes....

4 5 6 7

Includes: • 6 x 140mm sockets: T40, T45, T50, T55, T60, T70 • 2 torx tamper : T30x300mm, T80x100mm • 9 hex sockets : 7x230mm, 10x140mm, 11x140mm, 13x140mm, 14x50mm, 17x50mm, 19x50mm, 22x50mm, 24x50mm • 1 ball hex socket: 5x160mm • 5 XZN sockets: M9x100mm, M10x140mm, M12x140mm, M14x140mm, M16x100mm • 1 XZN socket M16x55mm • 1 impact XZN socket M18x75mm 1/2"D. • 9 TS socket: 10, 15, 20, 25, 27, 30, 40, 45, 50 1/4" D.

OM 2333 32 PIECES 1/2" D. TORX SOCKET BIT SET

8 9 10 11 32

Includes: • 10 sockets L.55mm : T20, T25, T27, T30, T40, T60, T70 • 10 sockets L.100mm : T20, T25, T27, T30, T40, T60, T70 • 6 sockets L.140mm : T40, T45, T50, T55, T60, • 6 sockets L.200mm : T40, T45, T50, T55, T60,

T45, T50, T55, T45, T50, T55, T70 T70

OM 2334 26 PIECES 1/2" D. XZN SOCKET BIT SET

Includes: • 8 sockets L.55mm : M5, M6, M8, M9, M10, M12, M14, M16 • 7 sockets L.100mm : M5, M6, M8, M9, M10, M12, M14 • 7 sockets L.140mm : M5, M6, M8, M9, M10, M12, M14 • 4 sockets L.200mm : M8, M10, M12, M14

GENERAL TOOLS HAND TOOLS

2 3

OM 2335 30 PIECES 1/2" HEX SOCKET BIT SET

Includes: • 9 sockets L.55mm : 5, 6, 7, 8, 10, 12, 14, 17, 19mm • 8 sockets L.100mm: 5, 6, 7, 8, 10, 11, 12, 13mm • 7 sockets L.140mm : 5, 6, 7, 8, 10, 12mm • 6 sockets L.200mm: 5, 6, 7, 8, 10, 12mm

4 5 6 7

OM 2336 30 PIECES 1/2" RIBE SOCKET BIT SET

Includes: • 9 sockets L.55mm: M5, M6, M7, M8, M9, M10, M12, M13, M14 • 9 sockets L.100mm : M5, M6, M7, M8, M9, M10, M12, M13, M14 • 7 sockets L.140mm : M8, M9, M10 (VW), M10.3 (FIAT), M12, M13, M14 • 7 sockets L.200mm: M8, M9, M10 (VW), M10.3 (FIAT), M12, M13, M14

8 9 10 11 33

GENERAL TOOLS HAND TOOLS

OM 3310 97PCS 1/4" AND 1/2" D. SOCKET SET

Dimensions OM 3310 97pcs 1/2“

1/4“

3 19 Embouts/Bits

Hex • 6-7-8-9-10-11-12-13mm

Hex • 14-15-17-19mm

Hex • E6-E7-E8-E10-E11mm

Hex • E12-E14-E16-E118-E20mm

2“ & 6“ • Rallonge/Extension bar

Hex (pour bougies allumage/for spark plugs) • 16-21mm

Cardan/Universal joint

5“ & 10“ • Rallonge/Extension bar

Porte embouts/Spinner handle

Cardan/Universal joint

Adaptateur /Adapter • 3/8“Fx1/4“M

Cliquet 72 dents/Ratchet handle 72 teeth

Adaptateur embouts /Shank bit adapter • 5/16“

#1-#2 • Phillips #1-#2 • Pozidrive

4 5

Hex • 10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32mm

Hex • 4-4.5-5-5.5-6-7-8-9-10-11-12-13mm

4-5.5-6,5mm • Plat/Slotted T10-T15-T20-T25-T27-T30-T40 3-4-5-6-8mm • Hex

Cliquet 72 dents/Ratchet handle 72 teeth 5/16” Embout/Bits 3-pc

T40-T50-T55

2-pc

#3-#4 • Phillips

2-pc

#3-#4 • Pozidrive

3-pc

8-10-12mm • Plat/Slotted

3-pc

10-12-14mm • Hex

OM 3320 43PCS 1/4" D. SOCKET SET

Dimensions OM 3320 43pcs 1/4“ 1/4“ • Hex • 4-4.5-5-5.5-6-7-8-9-10-11-12-13mm 1/4“ • Hex • 6-7-8-9-10-11-12-13mm 1/4“ • 2“ & 6“ • Rallonge/Extension bar

1/4“ • Cardan/Universal joint 1/4“ • Adaptateur embouts/Bit adapter Adaptateur /Adapter • 3/8“Fx1/4“M 1/4“ • Porte embouts/Spinner handle 1/4“ • Cliquet 72 dents/Ratchet handle 72 teeth 16 Embouts/Bits

7 8 9 10 11 34

#1-#2 • Phillips #1-#2 • Pozidrive 4-5.5mm • Plat/Slotted T10-T15-T20-T25-T27-T30 3-4-5-6mm • Hex

OM 2315 MULTI-PURPOSE BOX 90 PIECES

GENERAL TOOLS HAND TOOLS

OM 7112 1/2" IMPACT HEX BIT IMPACT SOCKET SET 80mm H4-H19

9 sockets H4-H5-H6-H8-H10-H12-H14-H17-H19

OM 7113 IMPACT RIBBED SPANNER END SET 1/2" D. 80mm M5-M14

9 ends M5-M6-M7-M8-M9-M10-M12-M13-M14 L.80mm

4 5

OM 7009 IMPACT TORX SOCKETS SET 1/2"D. T20-T25-T30-T40-T45-T50-T55-T60-T70

L.80mm

OM 7018 1/2" DRIVE SHAFT HEX IMPACT SOCKET SET

7 8 Impact socket made of chromemolybdenum steel for an easier access to hard-to-reach areas.

Contents: • 10-11-12-13-14-15-16-17-19-21-2224mm 1/2" D. impact sockets, lenght 70mm, max degree 30° • 1/2 D. extension, lenght 125mm

Complies with ISO 1174 and DIN 3121 standards.

9 10 11 35

GENERAL TOOLS HAND TOOLS OM 2332 BOX HGV IMPACT SOCKETS 3/4" XZN 16-18 TORX T70-T80-T90-T100

2 3

OM 9264 4 PCS SPLINE1/2" XZN BIT SET 12-14-16-18mm

Use on VAG and others

5 6 7

OM 9254 BOX 13 RIBE TIPS + TIP HOLDERS 1/2"D.

Composition : • M7/M8/M9/M10/M12/M13/M14 L.100mm • M5/M6/M7/M8/M10/M12 L.30mm • Drive 10mm

OM 7047 IMPACT SOCKETS SET 1/2"D. L.76mm E10-E11-E12-E14-E16-E18-E20-E22-E24

8 9 10 11 36

OM 2305 DOUBLE HEAD RATCHETING SPANNER SET E6-8/E10-12/E14-18/E20-24

OM 7013 TORX "E" SOCKETS SET 1/2"D. E10-E11-E12-E14-E16-E18-E20-E22-E24

OM 2330 SOCKET BIT SET 3/8"-1/2" D. 46 PCS

GENERAL TOOLS HAND TOOLS Bits available on retail

24 screwdriver bits L.30mm, 10mm drive : • XZN : 5-6-8-10-12mm • 6 hex male : 4-5-6-7-8-10-12mm • Torx : T20-T25-T30-T40-T45-T50-T55 • Flat : 8-10mm • Phillips : 2-3mm 16 screwdriver bits L.75mm, 10mm drive : • 4 ZXN bits : 5-6-8-10mm • 6 Hex bits : 4-5-6-7 • 8 Torx bits : T20-T25-T30-T40-T45-T50-T55-T60 • 2 adapters 3/8"x10mm & 1/2"x10mm

2 3 4

OM 0655 100-BIT SET

5 OM 7015 BOX 1/2" TORX SOCKETS 140mm E10-E12-E14-E16-E18

6 Special cylinder head impact ockets

OM 7006 SET 7 SOCKETS TS TIPS 1/4" TS10-TS15-TS20-TS25-TS27-TS30-TS40 These 5 star tips can be found on Renault, Peugeot, Mercedes, Rover and on diesel injection pumps.

OM 7005 TS KEY SET TS10-TS15-TS20-TS25-TS27-TS30-TS40 Applications: Renault, Peugeot, Mercedes, Rover and diesel fuel pumps.

7 8 9 10 11 37

GENERAL TOOLS HAND TOOLS

OM 0045 1/2"x3/4" INCREASER

OM 0033 3/4"x1" INCREASER

3 4 5 6 7 8

OM 4518 IMPACT SOCKET 3/4" E18 110mm

OM 4520 IMPACT SOCKET 3/4" E20 110mm

10 38

OM 4524 IMPACT SOCKET 3/4" E24 110mm

For cylinder head screw MAN and others

OM 4519 XZN IMPACT SOCKET Ø19mm 3/4" 75mm HGV

For cylinder head screw MERCEDES BENZ and others

For engine flywheel screw MERCEDES BENZ and others

OM 2355 RATCHET+10 BI-HEX SOCKETS 3/4" D. HEX HGV

OM 2354 RATCHET HANDLE + 11 HEX SOCKETS 1" FOR HGV 36-80mm Ø36-38-41-46-50-55-60-65-70-75-80mm

OM 0044 3/4"x1/2" REDUCER

OM 4517 XZN IMPACT SOCKET Ø17mm 3/4" 75mm HGV

Ø22-24-27-30-32-36-38-41-46-50mm

OM 0043 1"x3/4" REDUCER

GENERAL TOOLS HAND TOOLS

OM 4525 TORQUE MULTIPLIER R1:56 2800Nm +7 HGV SOCKETS 1" H.75mm

7 sockets: 24-27-30-32-33-36-38mm Tightness and release

3 4 OM 0765 120Nm PRESET 1/2" TORQUE WRENCH

Essential for tightening wheels : thanks to its preset torque, the operator does not lose time setting up the torque. The torque wrench is 375mm long and has a 105° angle for a quick tightening of studs. It makes a click sound when torque is reached.

5 6

• Release accuracy ± 4% • Weight: 825g • Lenght: 375mm DIN ISO standard: 6789

Comes with calibration test report

OM 0764 TORQUE WRENCH WITH INTERCHANGEABLE HEADS 3/8" D. 19-110Nm L.410mm 10-11-12-13-14-15-16-17-18-19mm

Delivered with calibration certificate

8 9 10

SA 0760 PAWL REPAIR KIT For OM 0760/OM 0764

11 39

GENERAL TOOLS HAND TOOLS

SA 0760 PAWL REPAIR KIT

Delivered with calibration certificate

OM 0760 TORQUE WRENCH 3/8" 19-110Nm 380mm

For OM 0760/OM 0764

2 3 4 5

OM 0761 TORQUE WRENCH 1/2" D. 40-210Nm 540mm

SA 0761 PAWL REPAIR KIT For OM 0761

OM 0762 TORQUE WRENCH 3/4" 100-500Nm 860mm

6 7

SA 0762 PAWL REPAIR KIT

10 11 40

Delivered with calibration certificate

CONVERSION TABLE

For OM 0762

CONVERT Nm 1 Nm = 0,102 Mkg TABLE Ft-lbs DE CONVERSION 1 Nm =0,738 COUPLES 1Nm = 8,851 In-IbsDE SERRAGE page XXXX 1Nm = 141,84 In-OZ

8 9

Delivered with calibration certificate

OM 0763 TORQUE WRENCH 1" 140-980Nm 1230mm

SA 0763 PAWL REPAIR KIT For OM 0763

Delivered with calibration certificate

These boxes allow you to extract damaged bolts and remove the wheel anti-theft system. The "twisted" shape provides the necessary grip for loosening.

GENERAL TOOLS HAND TOOLS

1 OM 0630 INVERTED THREAD IMPACT SOCKET SET FOR DAMAGED BOLTS Characteristics: • 17mm socket • 18.5mm socket • 20mm socket • 21.5mm socket

• • • • •

23mm socket 24.5mm socket 26mm socket 1/2" D. Length: 38mm

Wider griping area unlike previous sockets, easier extraction.

2 3 4

OM 8073 IMPACT TWISTED SOCKET SET FOR DAMAGED NUTS Ø6-Ø27mm Composition: • Punch: Ø4, Ø6, Ø8 and Ø12mm • Ø6 -8-10-11-12mm, 1/4"D. • Ø13-14-15-17-19-21-24-27mm, 1/2"D.

5 6

OM 0608 IMPACT TWISTED SOCKET SET FOR DAMAGED NUTS Ø17-Ø27mm

• Sockets: 17-19-21-23-27mm • 1/2" D.

OM 9075 TWISTED IMPACT SOCKETS DAMAGED NUTS HGV Ø22-Ø41mm Composition: • 4x1/2" drive sleeves Ø22Ø24-Ø27-Ø32mm • 2x3/4" drive sleeves Ø36Ø41mm

9 10 11 41

GENERAL TOOLS HAND TOOLS

OM 0624 8 PCES STUD REMOVER/INSTALLER This set allows the user to extract and replace the threaded studs without any damage. It contains 4 extraction sockets locknut type and 4 sockets for placing.

Contents: • Extraction locknut • Extraction locknut • Extraction locknut • Extraction locknut • Installation socket

3 4

socket M6x1.0mm socket M8x1.25mm socket M10x1.25mm socket M10x1.5mm M6x1.0mm

• • • •

Installation socket M8x1.25mm Installation socket M10x1.25mm Installation socket M10x1.5mm 6mm locking key

OM 0653 SCREW EXTRACTOR SET Ø2-Ø7.5mm

5 6

OE 0600 INDUCTION HEATER 4

7 8

Induction heater uses high frequency magnetic fields to heat up metal objects like bolts, bearings, pulley's etc.

Induction enables the metal to be heated with precision in a localised spot (depth 5mm) and brings the metal up to ideal temperature. No open flame, no risk of damage to surrounding parts and cables. Induction heater heats through rubber or plastic. Power 1380W

9 10 11 42

Content: • Induction central unit with 4m cable • Tube coil Ø25mm, lenght 135mm • Tube coil Ø40mm, lenght 200mm • Flexible coil lenght 600mm • Bearing coil lenght 1000mm • Round pad Ø75mm, lenght 250mm • Plastic case

OM 9301 RETHREADING MINI SET Ø4-Ø13mm

GENERAL TOOLS HAND TOOLS

2 Reduced bulk: ideal for difficult to reach places.

OM 9302 RETHREADING SET Ø4-Ø38mm

3 4 5

Reduced bulk: ideal for difficult to reach places.

6 7 8 OM 9307 RETHREADING TOOL Ø17-Ø38mm (EXTERNAL)

9 10 11 43

GENERAL TOOLS HAND TOOLS

OM 9304 HGV RETHREADING TOOL Ø35-Ø152mm (EXTERNAL)

Removable handle

2 3 4

OM 9300 METRICAL INNER AND OUTER THREAD FILE 0.8-3.0 Each side of thread have different notch as follows: 0.80-1.00-1.25-1.50-1.75-2.00-3.00 Lenght: 230mm

Allows to measure an inner or outer thread to reforming them.

5 6 7 8

OM 1000 MULTIBIT SCREWDRIVER 14 BITS

Composition: • Multibit screwdriver • SA5140: replacement • SA5141: replacement • SA5142: replacement • SA5143: replacement • SA5144: replacement • SA5145: replacement • SA5146: replacement

Unbreakable screwdriver made of composite material

flat end 4-6 end PZ1-PZ2 end PH0-PH3 end PH1-PH2 end T10-T15 end T20-T25 end T27-T30

OM 0258 SET OF 4 LEVERS WITH STRIKE DISK 210mm

280mm

10 11 44

460mm

620mm

GENERAL TOOLS HAND TOOLS

OM 0450 M5-M12 INSERTS KIT

For repairing worn or damaged threading. Inserts in stainless steel, highly resistant to breaking, corrosion and temperature. Box made up of inserts from M5 to M12, helical drills, taps, assembly tools and tang breakers.

OM 0452 BOX OF 25 INSERTS M5x0.8 Stainless steel inserts Length of assembled thread insert: 6.7mm

OM 0453 BOX OF 25 INSERTS M6x1 Stainless steel inserts Length of assembled thread insert: 8.0mm

OM 0454 BOX OF 25 INSERTS M8x1.25 Stainless steel inserts Length of assembled thread insert: 10.8mm

OM 0455 BOX OF 25 INSERTS M10x1.50 Stainless steel inserts Length of assembled thread insert: 13.5mm

OM 0456 BOX OF 10 INSERTS M12x1.75

OM 0457 BOX OF 10 INSERTS M14x125 Stainless steel inserts Special spark plug thread

Stainless steel inserts Length of assembled thread insert: 16.3mm

OM 0459 M14 INSERTS KIT HSS drill M14.5 Tap M14x2.0 Running tool insert 12 stainless steel inserts

Length reported net mounted 20mmx415mmx4-10mmx4

OM 9220 28 DRILLS Ø2.5-Ø10.2mm & TAPS M3-M12 SET Metal box with: -1 starting tap -1 intermediate tap -1 finishing tap

OM 0649 BOX 19 TITANE DRILLS Ø1-Ø10mm

3 4 5 6 7 8 9 10 11 45

GENERAL TOOLS HAND TOOLS

OM 9221 DRILL BOX-TAPS-DIES 37 PIECES Composition: • 8 dies : 3x0.5/3.5x0.6/4x0.7/5x08/6x1.0/8x1.25/10x1.5 0/12x1.75 • 8 taper taps • 8 bottoming taps in sizes shown • 8 HSS drills 2.5/2.9/3.3/4.2/5/6.8/8.5/10.3mm + accessories

OM 9222 TAP & DIE 52 PIECES

Composition: • 7 dies: M3x0.5/M4x0.7/M5x0.8/M6x1.0/M8x1.25/ M10x1.50/M12x1.75 • 5 UNF dies 1/4", 5/16", 3/8", 1/2" • 2 BSP dies 1/8", 1/4" • 14 taps sizes indicated • 13 HSS drills: 2.5-3.3-4.2-5-5.5-6.8-6.9-8.5-8.8-9.9-10.311.4-11.8mm • 5 screw extractor N°1-2-3-4-5 + accessories

5 6 7 8 9 10 11 46

OM 9223 TAP & DIE 75 PIECES Composition: • 17 dies: M2x0.25/M3x0.5/M3.5x0.6/M4x0.5/M4x0.7/ M4.5x0.75/M5x0.5/M5x0.8/M6x0.75/M6x1.0/M8x1.0/ M8x1.25/ M10x1.25/M10x1.5/M12x1.25/M12x1.75 • 1 die BSP28 1/8 • 17 taps coarse shank, dimensions see dies • 17 taps fine shank, dimensions see dies • 2 taps BSP28 1/8" • 17 drill bit HSS : 1.7-2.5-2.6-2.9-3.3-3.5-3.8-4.2-4.5-5-5.3-6.87-8.5-8.8-10.3-10.7mm + accessories

OM 9325 BOX OF TAP HOLDERS AND RATCHET THREADERS Composition: • 1 ratchet 3/8" • 2 diestocks Øext: 9 to 25mm • 2 tap holders M3 to M12

OM 2306 HGV WATER PUMP PLIER 320mm

OM 0950 FLEXIBLE HOSE CLIP DRIVER 6-7mm

GENERAL TOOLS HAND TOOLS

Jaw 0-65mm

2 OM 0111 SET OF 2 HGV SNAP RING CLIPS (INSIDE/OUTSIDE)

Maximum opening : 85mm

3 4

• • • •

3 pairs interchangeable end fittings for each pair Simple to adjust using the rack Length 420mm Max. opening: 75mm

OM 9395 CV BOOT CLAMP PLIER

3/8" D.

OM 0131 CV BOOT CLAMP INSTALLER TOOL

NEW Racheting clamping system Built on cutter

For OM 0130

Provides quick and effortless installation

8 9 10

OM 0130 STEEL BANDS (10PCS) For OM 0131

NEW

11 47

GENERAL TOOLS HAND TOOLS

2 3

Tool remotely operatable by cable, for installing/removing the entire range of self-tightening elastic clamps Ø18 to 54mm, even in difficult to reach places.

OM 9288 UNIVERSAL CRIMPING PLIER 630

Memory-shape sheath

OM 9278 UNIVERSAL CRIMPING PLIER 700

Opening: 55mm

4 5

OM 9390 UNIVERSAL CRIMPING PLIER FOR HGV 700

6 7

Opening: 80mm

OM 9397 REVERSIBLE PLIER FOR CLIC COLLARS

8 9 10 11 48

OM 9284 PLIER WITH ORIENTABLE HEADS FOR CLIC-COBRA COLLARS • For opening and closing "CLIC" collars • Compact : easy to manipulate in tight spaces

GENERAL TOOLS HAND TOOLS

OM 9389 PLIER FOR COLLARS

This multidirectional plier makes easier the removal of self-tensioning clamps (water, fuel, air) which are not easy to reach.

• Opening: 70mm • Non-slip handles

OM 9289 PLIERS FOR SPECIFIC VAG COLLARS

630

5 Example : Cooling hose

6 OM 9394 PLIERS FOR VAG FUEL COLLARS

7 8

OM 9374 HOSE CLAMP VISES TOOL 60mm NEW • • • •

1/4" D & 6 sides 14mm knurled nut 3 ways to catch the collars Opening: 60mm Overall bulk: 105mm

OM 9375 HOSE CLAMP VISES TOOL 36mm NEW • • • •

1/4" D & 6 sides 14mm knurled nut 3 ways to catch the collars Opening: 36mm Overall bulk: 82mm

10 11 49

GENERAL TOOLS HAND TOOLS

2 3

OM 8088 MAGNETIC PICK UP TOOL Ø5mm L.525mm 525

NEW

OM 8086 MAGNETIC PICK UP TOOL Ø5mm L.1070mm 1070

NEW

OM 8087 LONG FLEXIBLE SHAFT PICK UP 700

This tools allows to retrieve and pick-up small metallic or not metallic objects in confined areas. The 4 curved claws ensure a correct grip, and the powerfull magnet is ideal for metallic parts.

4 5 6

Technical datas: • Total length: 700mm • Magnet Ø15mm • Flexible shaft and aluminum bracket

OM 8074 TELESCOPIC MIRROR 228mm-715mm

63x45mm 228mm

715mm

7 8 9

OM 8071 TELESCOPIC MAGNET 170mm-670mm • Lifting capacity: 3.6kg • Magnet: Ø18mm

670mm

EG 0070 MAGNETIC TOOL HOLDER

EG 8008 20 MAGNETIC HOOKS SET These magnetic hooks are designed to help users to keep their frequently used tools in one place for easy handling.

10 11 50

170mm

• Weight : 1.35kg

Stainless steel mirror

Ideal for stocking small mechanical parts, screws, tools... Its strong PVC bottom magnets prevent from scratching.

EG 8007 MAGNETIC TRAY

GENERAL TOOLS HAND TOOLS

1 • • • •

ABS tray Ø148mm H.112mm 2 magnets Ø80mm

EG 8006 3 HOLE MAGNETIC SPRAY CAN AND SCREWDRIVER HOLDER With strong magnets to firmly stick on metal tool boxes, this holder is made to hold 3 spray cans and 7 screwdrivers. This holder is designed to allows the users creating new storage areas.

• 110x300x126mm • Load charge: 1.2kg

3 4 5

EG 8005 12 PCS MAGNETIC CLIPS SET Useful at office or at workshop, these clips will help the operators to organise their documents for an efficient sorting and an easier access.

6 7

• Nonslip jaws for secure hold • Durable body with rubber grips

EG 8004 4PCS MAGNETIC TOOL TRAY SET

8 With strong magnets to firmly stick on metal tool boxes, this set includes 4 pieces. These trays are designed to allow the users creating new storage areas.

Composition : • 1 tray 310x110x120mm, • 1 tray 270x110x120mm, • 1 tray 210x110x120mm, • 1 tray 150x110x120mm,

9 10

load load load load

capacity capacity capacity capacity

1.17kg 1kg 0.77kg 0.6kg

11 51

GENERAL TOOLS HAND TOOLS

OM 9204 INSERT INTERIOR–EXTERIOR CIRCLIP PLIERS 4 PIECES

OM 0622 SET OF CIRCLIP PLIERS 4 PIECES

• 2 pliers for inner circlips • 2 pliers for outer circlips • Length 80mm

3 4

EG 0527 BOX SNAP RINGS 285 PIECES

OM 0111 SET OF 2 HGV SNAP RING CLIPS (INSIDE/OUTSIDE) • • • •

3 pairs interchangeable end fittings for each pair Simple to adjust using the rack Length 420mm Max. opening: 75mm

6 7 8

EG 0525 405 PIECES RING JOINTS BOX

OM 9216 SET OF HOOKS FOR JOINTS 4 PIECES

9 10 11 52

Special hooks for joints L.130mm

OC 1103 INFLATABLE CUSHION

Rigid PVC panel: makes insertion easier

GENERAL TOOLS DOORS OPENING

For keeping pneumaticallyoperated doors open to make it easier to install windscreens.

2 Cushion dimensions: 155x165mm

EG 0745 SLIP KNOT SEMI-RIGID ROD TO HOOK DOOR HANDLES 1.10m

3 4

1100

EG 0741 SEMI-RIGID ROD FOR DOOR HANDLES OR KEYS 0.9m 900

EG 0742 SEMI-RIGID ROD TO HOOK DOOR HANDLES OR KEYS 1.25m 1250

EG 0743 SEMI-RIGID ROD TO HOOK DOOR HANDLES OR KEYS 1.80m 1800

EG 0744 U-SHAPED SEMI-RIGID ROD TO HOOK DOOR HANDLES 1.50m

5 6 7 8

1500

9 OC 9000 DOOR OPENING KIT CAUTION For professionals only, item sold without any instructions manual

10 11 53

GENERAL TOOLS STRIKING TOOLS

2 3 4 5 6 7 8 9 10

OM 0803 AUTOMATIC PUNCH

Made in France

Length: 143mm Chrome vanadium steel, resharpenable, 36kg impact force. In mechanics field, parts identification before dismantling is important.

OM 0804 SET OF 4 PUNCHES HGV

Made in France

Chrome vanadium steel with ergonomic anti-vibration handle. Ø10x300mm Ø12x300mm Ø14x300mm Ø16x300mm

OM 0805 FLAT CHISEL

Standards : NFE 71211, DIN 7255

Made in France

Chrome vanadium steel, resharpenable. Length: 300mm Width: 23mm Thickness: 13mm

OM 0800 SPLITTING CHISEL

Norms: DIN 6453

Made in France

Splitting chisel-Chrome vanadium steel, resharpenable. Length : 240mm Width : 26mm Thickness : 7mm

Standards : DIN 5463

OM 0806 MORTISING CHISEL Chrome vanadium steel, resharpenable.

Spring-loaded trigger lets you punch metal without using a hammer. Use the knob to adjust the impact force.

Length: 150mm Ø12mm

Made in France

Norms: DIN 6453

GENERAL TOOLS STRIKING TOOLS Made in France

OM 0801 SET OF 6 PIN DRIVERS WITH BASE

Octagonal body Chrome vanadium steel Ø3-4-5-6-8-10mm Length: 150mm

Norms NFE 71211, DIN 6450C

OM 0802 SET OF 5 PUNCHES WITH INSERTED BLADE

Made in France

Chrome vanadium blade with ergonomic & anti-vibration handle.

Ø3x125mm Ø4x150mm Ø5x165mm

Ø6x180mm Ø8x200mm Standards: NFE71211, DIN 7255

OM 0807 CUTTING CHISELS

5 6

sheet steel cutter

EG 5030 LETTER PUNCH SET DIN 10mm 27 PIECES EG 5032 LETTER PUNCH SET DIN 8mm 27 PIECES

7 8 9

EG 5031 LETTER PUNCH SET DIN 10mm 9 PIECES

EG 5033 LETTER PUNCH SET DIN 8mm 9 PIECES

10 11 55

GENERAL TOOLS STRIKING TOOLS

2 3

NEW

OM 0581 14 PCS HOLLOW PUNCH SET Ø5-Ø35mm

Composition : • Support for hollow punches • Hollow punches Ø5-6-8-10-11-13-16-19-22-25-28-32-35mm

OM 0580 HOLLOW PUNCH SET Ø3-Ø16mm

Contents : Ø3-4-5-6-8-9-10-11-12-13-14-16mm

4 5

OP 1475 AIR RIVETER KIT

Characteristics: • Rivet capacity till 4.8mm depending of the nose piece • Traction power: 900kg • Consumption: 1.4 to 1.8l/min • Stroke lenght: 14mm • Nose pieces: 2.4-3.2-4-4.8mm • Air inlet: 1/4" • Air pressure: 6.2bar

7 Supplied in case

8 9 10 11 56

OM 0480 PRO PLIERS FOR RIVETS & LOCKNUTS Suitable for : • Rivets Ø2.4-3.2-4-4.8-6.4mm • Locknuts Ø4-5-6-8-10mm

OM 0749 HAND RIVETER • Handle sheathed with return spring • Supplied with 4 nozzles Ø2.4-3.2-4.04.8mm • Key for nozzles assembly • Lenght: 270mm

GENERAL TOOLS CONSUMABLES

OE 6047 HOT AIR GUN 50-650°C

• • • • • • • • •

lcd dispay Last temperature memorized 5 options for airflow to 250 until 500l/min Heat constant control (protects against overheating and ensures a continuous job) Handle for a comfortable job Power: 2000W Operating temperature range: 50-650°c Wire lenght: 2m Weight: 0.8kg

2 3

Supplied with: • 1 protective nozzle • 1 welding nozzle • 1 reduction nozzle • 1 reflective nozzle • 1 scraper

EG 0911 THERMO-FUSE SLEEVES SET 0,3-0,8mm 10 PIECES

EG 0902 THERMO-FUSE SLEEVES SET 0,8-2mm 10 PIECES

EG 0913 THERMO-FUSE SLEEVES SET 2-2,4mm 10 PIECES

5 6

OE 0811 SOLDERING IRON 30W WITH STAND 1100

EG 0540 TORCH WITH HEAT SHRINK TUBING SET

NEW

This soldering iron is ideal for a multitude of work. The high quality tips are suitable for lead-free soldering.

The station comes with sponge for cleaning the tips, an additional tip (plated 3mm) and tin (600mm, Ø1.5mm). The work stand has two crocodile clips for holding electronic boards. Weight: 560g

SA 0811 100g TIN For EG 0050/OE 0811

9 Composition: • 1 Mini Gas torch • Assorted coloured tubing and sizes: 1x15mmx500mm 60x1.5mm 35x2.5mm 25x3mm 20x5mm 10x6mm 10x10mm

10 11 57

GENERAL TOOLS CONSUMABLES

2 3

OE 3030 FUSE TESTER 6-12-24V

The two-in-one tester allows to check quickly fuses on spindles. Suitable for mini, standards and maxi fuses of 6,12 and 24V. This tool is adjustable according to fuses and saving time visualizing the led when the fuse is ok.

EG 0524 SET OF ELECTRICAL SERVICING ACCESSORIES 338 PIECES

4 5 EG 0526 120 PIECES FUSES BOX 5-30A

Composition : • 20x05A • 20x10A • 20x15A

7 8 9 10 11 58

AC 5111 12V RELAY TESTER

• 20x20A • 20x25A • 20x30A

Lets you test electromechanical relays fast and accurately. Saves operator time and gives a reliable diagnosis.

Suitable for 4 or 5 pin relays

• • • • •

Power surge protection Suitable for diode relays LED result display Test voltage 12V Powered with croco clips

Water based washable paint markers • UV resistant • For all surfaces: metal, plastic, wood, glass, stone, foil... • Transparent body so you can immediately see how much paint is left • VOC less than 0.6% (Volatile Organic Compounds) • Complies with standard ASTM D436 (non toxic)

GENERAL TOOLS CONSUMABLES

EG 0021 WHITE WASHABLE MARKER FOR ALL SURFACES

EG 0023 YELLOW WASHABLE MARKER FOR ALL SURFACES

EG 0022 RED WASHABLE MARKER FOR ALL SURFACES

EG 0024 GREEN WASHABLE MARKER FOR ALL SURFACES

EG 0136 RECTANGULAR RUBBER PAD 180x100x60 Rubber SBR 75° SHORE A

EG 0137 RECTANGULAR RUBBER PAD 160x120x35 Rubber SBR 75° SHORE A

EG 0138 RECTANGULAR RUBBER PAD 160x120x20

2 3 4 5 6 7 8

Rubber SBR 75° SHORE A

EG 0143 RECTANGULAR RUBBER PAD 160x125x125 Rubber SBR 75° SHORE A

EG 0607 LV BLOCK L.105mm Height: 65mm

9 10 11 59

GENERAL TOOLS CONSUMABLES

EG 0135 RUBBER PAD 160x28 Outer diameter 160mm Inner diameter 138mm Height 28mm

Rubber SBR 75° SHORE A

EG 0144 RUBBER PAD 147x25 Outer diameter 147mm Inner diameter 135mm Height 25mm

3 4

Thermoplastic rubber forprene 80° SHORE A

EG 0139 RUBBER PAD 120x26 Outer diameter 120mm Inner diameter 108 & 110mm Height 26mm Rubber SBR 75° SHORE A

EG 0142 RUBBER PAD 146x23 Outer diameter 146mm Inner diameter 110mm Height 23mm Hole Ø12mm Rubber SBR 75° SHORE A

6 7

EG 0141 RUBBER PAD 121x26.5

8 9

Outer diameter 121mm Inner diameter 106 & 111mm Height 26.5mm Rubber SBR 80° SHORE A

EG 0140 RUBBER PAD 100x22 Outer diameter 100mm Inner diameter 80 & 93mm Height 22mm Rubber SBR 80° SHORE A

10 EG 0145 RUBBER PAD 140x28

11 60

Thermoplastic rubber forprene 80° SHORE A

GENERAL TOOLS EXTRACTION OM 3413 TRIPLE ARM EXTRACTOR Ø90mm WITH BUTTERFLY LOCKING

110mm

65mm

3 17mm

OM 3414 TRIPLE ARM EXTRACTOR Ø160mm WITH BUTTERFLY LOCKING

OM 3415 TRIPLE ARM EXTRACTOR Ø250mm WITH BUTTERFLY LOCKING

4 5

225mm

165mm

30mm

25mm

OM 3423 HYDRAULIC GEAR PULLER SET 10T Max.

145mm

90mm

7 8 9

Composition : • SA3423 :1 hydraulic spindle with 10T and centering pin • Various puller legs 100-150-200mm • Bearing separator up to Ø105mm • Various yokes 2 & 3 legs • Various extensions

10 11 61

GENERAL TOOLS EXTRACTION

OM 3412 GEAR AND BEARING PULLER/SPLITTER SET Composition : • 2 arms for 80mm long knife • 2 arms for 120mm long knife • 2 arms for 60mm long knife • 2 arms for 95mm long knife • 1 arm support max capacity 160mm • 1 separator knife min 19mm max 70mm • 1 separator knife min 5mm max 65mm • 1 centering cup Ø28mm

2 3

OM 3418 BEARING EXTRACTOR SET INTERNAL GRIP Ø8-58mm Composition : • 1 slide hammer, length 280mm, weight 1kg • 1 internal-grip tip 8mm to 11mm • 1 internal-grip tip 12mm to 17mm • 1 internal-grip tip 18mm to 23mm • 1 internal-grip tip 24mm to 29mm • 1 internal-grip tip 30mm to 34mm • 1 internal-grip tip 34mm to 38mm • 1 internal-grip tip 39mm to 43mm • 1 internal-grip tip 44mm to 48mm • 1 internal-grip tip 49mm to 53mm • 1 internal-grip tip 54mm to 58mm

4 5 6 7

OM 3409 BEARING EXTRACTOR SET INTERNAL GRIP Ø8-32mm Composition : • 1 impact weight, length 380mm, weight 1kg • 1 internal-grip tip 8mm to 10mm • 1 internal-grip tip 10mm to 12mm • 1 internal-grip tip 12mm to 14mm • 1 internal-grip tip 15mm to 17mm • 1 internal-grip tip 17mm to 20mm • 1 internal-grip tip 20mm to 24mm • 1 internal-grip tip 25mm to 29mm • 1 internal-grip tip 30mm to 32mm

OM 3410 SLIDE HAMMER/PULLER SET 10 PIECES

9 10 11 62

Composition : • Hub extractor • Bearing extractor • 2 supports: 2 and 3 grips • 3 grips 90mm • 1x4-hole hub extractor, capacity Ø120mm • 1x4-hole hub extractor, capacity Ø150mm • 1 inertial cup extractor • 1 screw centerer • 1 screw extractor • Mass 2.5kg • Axle 500mm

AC 0517 EXTERNAL MICROMETER 0-25mm Characteristics: • Tempered steel touch • Metal contact area • Chrome-plated body matt, antireflection • Locking by lever

AC 0528 MICROMETER 25-50mm NEW

GENERAL TOOLS MEASURING AC 0514 COMPARATOR 0-10mm Calibration certificate

Characteristics: • Mesure range 0 to 10mm • Travel/turn : 1mm • Resolution 0.01mm • Chromed-steel case Ø57mm • Fixing rod Ø8mm • Point Zero locking screw • Delivered with calibration certificate

2 3 4 5

AC 0515 MAGNETIC BASE FOR COMPARATORS

• • • • •

Joints locking Magnetic base, attraction strength 80kg Height : 235mm Vertical stalk Ø12mm Weight : 1,850kg

8 AC 4951 DEPTH GAUGE FOR TYRES • Digital display (mm/inch) 0 to 13mm • Accurate to 0.01mm • Reset (to zero) in any position

AC 0518 METRIC SIZE FEELER GAUGE

• 20 blades • 0.05 to 1mm • Resolution: 0.05mm

9 10 11 63

GENERAL TOOLS MEASURING

2 3

AC 0522 GAUGE FOR BRAKE DISC

This aluminum caliper allows to measure the disc brakes depth and the tyre tread wear. It has a lever that frees the measuring jaw in order to hold the brake disc reading. This tool was designed to bypass the external burr left by the disc wear, what usually prevents the user to put off a traditional caliper. It also has a tyre tread gauge.

Measuring range: 0 to 60mm Metric scale: 1/10mm graduations

5 AC 0513 CALIPER

• • • •

7 8 9 10 11 64

AC 0511 DIGITAL CALIPER • From 0 to 150mm • Resolution: 0.01mm • Reset in any position

From 0 to 150mm Resolution 1/20mm Depth gauge Locking knob

TESTING TOOLS

CONTENTS

1 BATTERY

3 4 5 6 7 8

ELECTRONIC

LPG

HEADLIGHT ADJUSTMENT

AIRCON

COOLING SYSTEM

BRAKING

DRAINING

FUEL

VIDEOSCOPE

ENGINE

INJECTOR

9 10 11 66

67 72 82 83 84 90 95 96 97 102 103 110

OE 2040 MULTICHARGER STATION 4 CHANNEL

TESTING TOOLS BATTERY

1830

Automatic charger with microprocessor and INVERTER technology. OE2040 multicharger station can charge, at the same time, 4 batteries up to 100%. Charge up to 100% all lead-acid and electrolyte liquid or gel batteries, in 5 steps : desulfation, quick charge, EQ and analysis, maximum charge, automatic regulation. Thanks to its 4 connectors loose clips, this multicharger station supplies 4x5A to charge and maintain in charge up to 4 batteries simultaneously. Its LEDs indicate the charging status for each battery. Thanks to its INVERTER technology, charging is quicker than a traditional charger while extending batteries lifetime. It also reduces energy consumption during the charge, saving 20% energy compared to conventional chargers.

1 2

3 4

Characteristics: • Charging capacity: 10-80Ah • Voltage: 230V, 50-60Hz • On/off switch • Power: 240W • Charging voltage: 12V • Type of batteries: SLI, AGM, PL, WET, CA • Current: 5A (x4) • Lenght of cables, clips included: 1830mm • Dimensions: 350x190x75mm • Weight: 2.5kg

5 6 7 8

Protections of embedded electronics, charger, batteries and user: • No voltage in the clips if they are not connected to the battery • Protection against overloads • Protection against electrical shorts • Spark-system • Protection against polarity reversals

MORE Battery status can be tested by different ways:

• • • •

Visual control Test with a voltmeter Test with a diagnostic device Test with a densiometer

BATTERY STATUS

ELECTROLYTE DENSITY

TENSION/VOLT

100%

1.270

12.65

80%

1.250

12.55

60%

1.200

12.35

40%

1.170

12.15

20%

1.130

11.95

10 11 67

TESTING TOOLS BATTERY

1 2

3 4

AC 5230 LOAD TESTER FOR 6V-12V BATTERIES & 12V-24V ALTERNATORS • • • •

For batteries: SAE, DIN, ENC1, ENC2, IEC 40 to 2000CCA Mini 1.5V flat battery tester Scroll down menu Multilingual: French, English, Spanish, German, Italian, Portuguese, Japanese.

AC 5244 BATTERY ELECTRICAL SYSTEM ANALYSER 1.8 WITH DETACHABLE PRINTER • • • •

Cable: 1800mm Suitable for start/stop batteries

For 12V SLI or AGM batteries Rating: CCA-SAE-DIN-JIS-IEC-EN-CA Allows to test: batteries, starters, grounding, alternators Test report: results can be printed or transferred to a computer (via supplied USB cable)

Paper 55mm width (SA5245=2 rolls)

5 6

SA 5245 SET OF 2 THERMAL PAPER

7 8 9

For AC 5244

AC 5222 12V BATTERY TESTER

AC 5237 LOAD TESTER FOR 12V BATTERIES & ALTERNATORS

Battery and load circuit tester with digital display. EASY TO USE: Press the load button and in 10 seconds the test is completed.

10 11 68

• 12V battery of 200-1000 CCA • Also tests the 12V load and starter circuits • Device equipped with a resistor

• For batteries: SAE: 200-1200CCA DIN: 110-670 CCA IEC: 130-790 CCA

EN: 185-1125 CCA CA (MCA): 240-1440 CA (MCA) • Mini 7V battery charge

TESTING TOOLS BATTERY

OE 0035 LOAD TESTER FOR 12V BATTERIES & ALTERNATORS

EG 5060 MALE FEMALE BRUSH FOR BATTERY CABLE TERMINALS CLEANING

1 2

OE 0064 12V MEMORY SAVER

To maintain electronic calculator memory while the battery is being replaced or is switched off.

5 6 • Parallel connection to cigarette lighter or clamp • 12V surge protector

OE 0165 RECHARGEABLE MEMORY SAVER To maintain electronic calculator memory while the battery is being replaced or is switched off. Car supply comes from the cigarette lighter or the diagnostic socket. Protects the system from any power surges. Compatible with all multiplexed vehicles. • Battery life : 4 days (8h/day) • 3.5A

7 8 9 10 11 69

TESTING TOOLS BATTERY

OE 2120 BATTERY CHARGER 12V 1.2-120Ah

INVERTER TECHNIQUE Compatible multiplexed vehicle Can be used without damaging the vehicle’s electronic system. • Recommended for all types of sealed, maintenance-free lead batteries, MF, AGM, GEL, Ca etc. • Automatic charging and maintenance • Monitors and maintains charged batteries during periods of inactivity • Approved for use outside • Charges the battery fully

3 4 5 6 7 8 9 10 11 70

• Automatic recharging in several phases including the maintenance phase • Wall mount • Protected against short circuits • Protected against polarity inversion • Protected against overheating • Approved for use outside • No risk of battery overload • Automatic charging

Technical datas

OE 2225 BATTERY CHARGER 12V 14-225Ah

REF.

Input voltage Power Charging voltage Charging current Charging programs Nominal capacity Dimensions Weight

Volt 50-60Hz (AC) W V Amp. N° Ah min/max mm kg

OE 2120

1 Phx230 60 14,4 - 14,7 3,6 P1 - P2 - P3 1,2 - 120 202x90x45 0,55

REF.

OE 2225

1 Phx230 130 14,4 - 14,7 7 P1 - P2 - P3 - P4 14 - 225 202x90x45 0,65

Charging time REF.

OE 2120

Battery / Ah Charging time / h

2 2

10 10

14 3

20 4,5

50 11,5

80 18

120 27

REF.

OE 2225

Battery / Ah Charging time / h

20 3

75 10

115 16

225 32

OE 4500 BATTERY CHARGER-BOOSTER 12-24V 15-500Ah

Characteristics: • Charge current regulation • Protection against overloads • Protection against short circuits • Protection against polarity inversions • Types of rechargeable batteries: lead, maintenance-free batteries, AGM, Ca • Battery voltage 12/24V (12V-150A)

Technical datas Input voltage Power Charging voltage Average charging current Effective charging current Charging programs Boosting current Boosting current Nominal capacity Dimensions Weight

Volt 50-60Hz (AC) kW V Amp. Amp. N° Amp. 0V (cc) Amp. 1V Ah 15h min/max mm kg

1 Phx230 3,5 12 et 24 35 50 2 300 270 15 / 500 340x300x160 11,8

TESTING TOOLS BATTERY

OE 4260 AUTOMATIC BATTERY CHARGER 6-12V 15-260Ah

Calcium battery

OE 3260 AUTOMATIC BATTERY CHARGER 6-12-24V 15-260Ah

Characteristics: • Constant charge current • On/off button • Electronic control • Automatic charge • Sulfated battery recognition • Desulfatation programme • Power surge protection • Charging position for MOTORCYCLE battery

OE 4300 BATTERY CHARGER BOOSTER ON WHEELS 12-24V 35-1300Ah

3 Technical datas

REF.

Input voltage Power Charging voltage Average charging current Effective charging current Charging programs Boosting current

REF.

OE 3260

1 Phx230 260 6 et 12 15 22 3 15 / 260

1 Phx230 530 6,12 et 24 15 22 3 15 / 260

Boosting current

2,5V/el, DC (min 24h / max 48h)

non

oui

Nominal capacity Dimensions Weight

V/el, DC mm kg

2,25 312x172,5x126,5 5,35

2,25 312x172,5x126,5 6,35

OE 4150 BATTERY CHARGER BOOSTER ON WHEELS 12-24V 25-2200Ah

Characteristics: • Rapid charge with timer • Protection against overloads, shortcircuits, polarity inversions • Types of rechargeable batteries: Pb, WET, AGM, Ca • Battery voltage 12/24V

OE 4260

Volt 50-60Hz (AC) W V Amp. Amp. N° Ah 15h min/max

OE 4080 BATTERY CHARGER BOOSTER ON WHEELS 12-24V 35-800Ah

Characteristics: • Rapid charge with timer • Protection against overloads, shortcircuits, polarity inversions • Types of rechargeable batteries: Pb, WET, AGM, Ca • Battery voltage 12/24V • Boosting remote control

Characteristics: • Rapid charge with timer • Protection against overloads, shortcircuits, polarity inversions • Types of rechargeable batteries: Pb, WET, AGM, Ca • Battery voltage 12/24V

4 5 6 7 8 9

Technical datas Input voltage Power Charging voltage Average charging current Effective charging current Charging programs Boosting current Boosting current Nominal capacity Dimensions Weight

REF.

Volt 50-60Hz (AC) kW V Amp. Amp. N° Amp. 0V (cc) Amp. 1V Ah 15h min/max mm kg

OE 4080

1 Phx230 2,3 / 11 12 et 24 V 70 105 4 700 460 35 / 800 470x320x750 28

REF.

OE 4300

3 Phx230/400 2,5 / 20 12 et 24 V 90 / 100 90 / 100 5 1350 800 35 / 1300 470x320x750 44

REF.

OE 4150

3 Phx230/400 4 / 42 12 et 24 V 130 / 180 130 / 180 10 2500 1500 25 / 2200 590x380x840 73

10 11 71

TESTING TOOLS ELECTRONIC

Lets you test electromechanical relays fast and accurately. Saves operator time and gives a reliable diagnosis.

AC 5111 12V RELAY TESTER

Suitable for 4 or 5 pin relays

• • • • •

Power surge protection Suitable for diode relays LED result display Test voltage 12V Powered with croco clips

4 5

OM 9392 STRAIGHT NOSE PLIERS

OM 9393 90° ELBOW NOSE PLIERS

6 7 8

OE 3004 DIGITAL MULTIMETER 1

9 10 11 72

Light at the top Characteristics: • DC voltage: 200mV-2V-20V-200V-250V • AC voltage: 200mV-2V-20V-200V-250V • DC current: 20mA-200mA-10A • AC current: 20mA-200mA-10A • Resistance: 200ohm-2kohm-20kohm-200kohm-2Mohm20Mohm • Diode test: approx. 2.8V • Temperature: 0-1000°C • Battery test: 1.5-9-12V • Continuity: <30ohm

TESTING TOOLS ELECTRONIC

EG 0540 TORCH WITH HEAT SHRINK TUBING SET

NEW

Composition: • 1 Mini Gas torch • Assorted coloured tubing and sizes: 1x15mmx500mm 60x1.5mm 35x2.5mm 25x3mm 20x5mm 10x6mm 10x10mm

EG 0526 120 PIECES FUSES BOX 5-30A

OE 3030 FUSE TESTER 6-12-24V

Composition : • 20x05A • 20x10A • 20x15A • 20x20A • 20x25A • 20x30A

The two-in-one tester allows to check quickly fuses on spindles.

Suitable for mini, standards and maxi fuses of 6,12 and 24V. This tool is adjustable according to fuses and saving time visualizing the led when the fuse is ok.

6 7 8

OE 0036 VOLTAGE SOUND TESTER

OE 0065 POLARITY/CONTINUITY TESTER 3 TO 48V 3-48V

135

Voltage and battery tester for cars, HGVs and bikes Positive/negative cables test

10 11 73

TESTING TOOLS ELECTRONIC

OE 3010 VOLTAGE DETECTOR

The VAT tester allows to verify the voltage lack on a electric circuit before an intervention. According to the standards: NF 61010-600V cat3 et IEC 61243-3VAT/DDT.

900

Characteristics: • Continuity test • Differential circuit breaker test 30mA • Moisture and dust proof • Voltage test: 690V AC/D and 750V DC with noise emission for range change • Resistance measurments until 2kO • Continuity noise test until 2kO

4 5

OE 0301 ANTI-UV FACESHIELD

• • • • •

Frequency of use: DC 50-60Hz and 400Hz Self-test of probes, cords, displays, batteries Cord lenght: 900mm Low impedance output: 390kO Probes center distance: 19mm (for circuit breaker) • Dimensions: 172x64x38mm • Weight: 180g

OE 0303 LEATHER OVERGLOVES FOR INSULATED GLOVES

OE 0302 1000V INSULATING GLOVES (x2)

Size 10 Standards: EN-388

Size 10 Standard : EN 60903

1000V

6 7 8 9

OE 0700 HYBRID AND ELECTRIC VEHICLES SECURE KIT 1000V

Contents: • 1000V insulated universal clamp • 1000V insulated cutting plier • 1000V insulated 3/8" ratchet wrench • 1000V insulated 3/8" electrical cord • 9x1000V insulated 3/8" sockets, 7-8-10-12-14-15-17-19-22mm • 1000V insulated 3/8" T-handle • 1000V insulated cutter • 6x1000V insulated open-end spanners, 7-8-10-12-14-17mm • 2x1000V insulated crosshead screwdrivers (1x100 and 2x100) • 2x1000V insulated flat screwdrivers (0.8x4x100 and 1.0x5.5x125) • Foamed plastic box

10 Standards: 60900

11 74

TESTING TOOLS ELECTRONIC

OE 5020 AMMETER CLAMP 1000A 1

• • • • •

Intensity test Amperemeter test Diode test Continuity test Data-hold function

Technical datas: • DC voltage: 600V±(0.5%+5) • AC voltage: 600V±(1%+5) • Direct current: 200/1000A±(2.5%+5) • Alternating current: 200/1000A±(2.5%+5) • Resistance: 200 ohms±(1.2%+5) • Frequency: 2kHz±(2%+5) • Power supply: 9Vx1 • Dimensions: 250x100x46mm • Weight: 365g

• IEC-61010 CATII with overload protection • 3 1/2-digit backlight 16mm large LCD • Automatic scales • Comes with battery and test lead

OE 5115 CONNECTOR KIT FOR ELECTRICAL MEASURING TOOLS

Allows to Allows simulate to the simulate the probe signal & resistive probe signal & resistive sensor from 0 to from 5kΩ. 0 to 5kΩ. sensor

Led stroboscope. Led stroboscope. 2

Allows to Allows controltothe signals. control the signals. IndicatesIndicates de polarity dethanks polarity thanks to a changing color. to a changing color.

Maintenance tool for the Maintenance tool for the airbag replacement. airbag replacement.

Srs connector. Srs connector.

Alligator clip. Alligator clip.

Can be connected to Can be connected to mesure tools : multimeter, mesure tools : multimeter, oscilloscope… oscilloscope…

Testing probe. Testing probe.

Can be connected to the to the Can be connected providedprovided cables extensions cables extensions and to mesure : and totools mesure tools : multimeter, oscilloscope… multimeter, oscilloscope…

Acicular probe. Acicular probe. 4

Ø 0,7 mmØ- 0,7 Length mm. 30 mm. mm 30 - Length

Double connector: allows allows Double connector: the connection in parallelin parallel the connection 2 of a measurement tool on tool on of a measurement a thread a orthread a wiring ortermination. a wiring termination. simple connector. simple connector. 4

Male terminals connectable Male terminals connectable 36 with a mesuring tool. with a mesuring tool.

Flat: Flat: 0,6 x 0,6 -0,6 3 pieces x 0,6 - yellow 3 pieces yellow 0,6 x 0,9 -0,6 3 pieces x 0,9 - red 3 pieces red 0,6 x 1,3 -0,6 3 pieces x 1,3 - black 3 pieces black 0,6 x 1,9 -0,6 3 pieces x 1,9 - blue 3 pieces blue 0,6 x 2,3 -0,6 3 pieces yellow x 2,3 - 3 pieces yellow 0,8 x 2,8 -0,8 3 pieces x 2,8 - red 3 pieces red 0,8 x 4,7 -0,8 3 pieces x 4,7 - black 3 pieces black 0,8 x 6,0 -0,8 3 pieces x 6,0 - blue 3 pieces blue Round: Round: 1,6 mm - 1,6 3 pieces mm - yellow 3 pieces yellow 2,3 mm - 2,3 3 pieces mm - red 3 pieces red 3,5 mm - 3,5 3 pieces mm - black 3 pieces black 3,9 mm - 3,9 3 pieces mm - blue 3 pieces blue

Female terminals connectable Female terminals connectable 36 with a mesuring tool. with a mesuring tool. 2

Flat: Flat: 0,6 x 0,6 -0,6 3 pieces x 0,6 - yellow 3 pieces yellow 0,6 x 0,9 -0,6 3 pieces x 0,9 - red 3 pieces red 0,6 x 1,3 -0,6 3 pieces x 1,3 - black 3 pieces black 0,6 x 1,9 -0,6 3 pieces x 1,9 - blue 3 pieces blue 0,6 x 2,3 -0,6 3 pieces x 2,3 - yellow 3 pieces yellow 0,8 x 2,8 -0,8 3 pieces x 2,8 - red 3 pieces red 0,8 x 4,7 -0,8 3 pieces x 4,7 - black 3 pieces black 0,8 x 6,0 -0,8 3 pieces x 6,0 - blue 3 pieces blue Round: Round: 1,6 mm - 1,6 3 pieces mm - yellow 3 pieces yellow 2,3 mm - 2,3 3 pieces mm - red 3 pieces red 3,5 mm - 3,5 3 pieces mm - black 3 pieces black 3,9 mm - 3,9 3 pieces mm - blue 3 pieces blue

3 4

This set of electrical connectors lets you read measurements without damaging the vehicle. Potentiometer variable resister. Potentiometer variable resister. 2 5kΩ. 5kΩ.

5 6 7

Compatible with measurement instruments: multimeters, oscilloscopes, etc.

EG 0016 PIT PROTECTION COVER REEL 16m

8 OE 5116 RETRACTABLE PROBES

310mm

ISO EN 12100-1 ISO EN 12100-2 290mm

10 11 75

TESTING TOOLS ELECTRONIC

AC 5108 CONTINUITY/ VOLTMETER TESTER 5

This device is designed to reduce the diagnosis time of cars’ electrical systems. After simply connecting the device to the vehicle battery, the technician can send a positive or negative current to the probe tip by moving the switch forwards or backwards. Diode

4 5

USES: • Continuity test • Polarity test • Measuring DC voltage from 2V to 24V • To check lights, components and electric motors (windows, windscreen wipers, starter, etc.) • To monitor and locate short-circuits • To detect loose contacts

6 7 8 9 10 11 76

Positive/Negative 2 position switch: To select supply polarity (test function) and polarity testing (voltage function) Selection button: • Test/Voltage

Equipped with an overcurrent protection system, the tester protects itself and the vehicle’s components during tests in the event of power surges and polarity inversion.

Metal chip: Once the tester is connected to the vehicle’s battery, put the chip in contact with one of the vehicle’s grounding points to turn the diode on or off.

TESTING TOOLS ELECTRONIC

AC 5109 CONTINUITY TESTER/DIGITAL VOLTMETRE 5

This device is designed to reduce the diagnosis time of cars’ electrical systems. After simply connecting the device to the car battery, the technician can supply the probe tip with a positive or negative current by moving the switch forwards or backwards.

1 2

3 Corps aimanté

4 5

Diode

Positive/Negative 2 position switch: To select supply polarity (test function) and polarity check (voltage function) Selection button: • Test/Voltage

6 // //

Uses: • Continuity test • Polarity test • Measuring DC voltage from 0V to 35V • Checking lights, components and electric motors (windows, windscreen wipers, starter, etc.) are working properly • To monitor and locate short-circuits • Detecting loose contacts • Relay operation test • Voltage check via the cigarette lighter

Equipped with an overcurrent protection system, the tester protects itself and the vehicle’s components during tests in case of power surges and polarity inversion. Cover supplied

9 10 11 77

TESTING TOOLS ELECTRONIC

AC 5110 SCOPEMETER 1

This portable scopemeter is a measuring instrument combining a number of functions to help technicians in their diagnosis of car electrical circuits. It includes scopemeter and multimeter functions.

Supplied with USB connector cable

4 5 6 7

For collecting data on: • Voltage • Signals • Frequencies • OCR (opening cyclic ratio)

Equipped with two measurement input points so two curves can be analysed simultaneously. Example: comparing two sensors at the same time to compare the values of their signals. This device is essential for diagnosing electronic management systems and analysing multiplex signals, commands and data from the different sensors.

8 9 10 11 78

Voltage: peak to peak, average, RMS Frequency meter: Frequency/Period Resistance: 600/6K/60K/600K/6M/60M Diode: =2V Mains adapter Computer interface Software: Computer software 3.6V Lithium battery Dimensions (lxLxh): 114x222x50mm Weight: 700g (with battery) Band width: 20MHz Number of channels: 2 Sampling rate: 100MEch/s

Horizontal sensitivity: 10ns/div Horizontal precision: 0.01% Horizontal distinction: 10ns Vertical sensitivity: 5mV/div-20V/div Vertical precision: ± (5% 1 pixel) Vertical distinction: 8 bits Maximum input voltage: 300V Trigger Mode: Normal, Auto, Single Screen display: 800mmx60mm Back lighting To record: 6 sets of waveforms and 10 sets of parameters Input impedance: 1MOhm, =20pF Channel isolation: 100:1

TESTING TOOLS ELECTRONIC

AC 5112 ELECTRONIC SIGNAL DETECTOR

1 See our multimeters p.72

2 This diagnostic device is designed so that technicians can test electrical and electromechanical components without having to remove them or turn them off and without stripping or damaging the cables. Tests:

The engine does not start. What should you do? Electrical fault or fuel supply problem? Traditional method: Without using the AC 5112 detector

3 4 5 6

I remove the protective layer to get to the wiring.

7 I consult the manufacturer’s manual to find out about the connections and what needs to be done.

I note the values by connecting to the components that need testing and risking damaging them.

At the end, I have to put it all back together, response time: 1 hour!

8 Using the AC 5112: • Connect the clips to the vehicle’s battery • Engine turning or starting up • Put the device’s coupling loop in contact with the component that needs testing. • A sound and light signal is given if a magnetic field is detected. • You can just put the probe nearer the component to check if it is working. • Faulty components are identified without having to take anything apart. • You only need to take parts out if they need to be repaired It only takes 5 minutes!

9 10 11 79

TESTING TOOLS ELECTRONIC

The stroboscopic light has to be connected to the first spark plug thread or the first injection pipe. When connected to those parts; the stroboscopic light makes a flash that is synchronized with the spark plug signal or the injection time. When the flash is directed in front of the flywheel or the crankshaft pulley, it lets appear a mark. you can now precisely adjust the advance. It is necessary to adjust the advance by placing the fix mark (on the engine) in front of the pulley’s mark or the flywheel’s mark.

AC 5018 PETROL/DIESEL STROBE LIGHT 9-16V

Multifunction tool: • Tachymeter 0 to 9900 rpm • Advance measurement: 0.1 to 60° • Cam angle: 0.1 to 100% • Voltmeter • Automatic selection: 4 stroke or 2 stroke • Petrol or diesel connectors

4 5 This tool should be used with the manufacturer data. Non provided.

6 7 8

AC 5103 OPTICAL AND CONTACT TACHOMETER This device is a portable digital tachometer which is used to measure the rotation speed. This compact tachometer has two methods of measure: the first one is optical, thus without contact, the other one is mechanical by means of an adapter (3 sorts of adapters supplied). It works as follows: • Optical method: It concentrates a beam of light on a reflective strip attached to a rotary object. The beam is then reflected each time the strip passes, which is quickly translated into rotation speed. The distance

9 10 11 80

• Mechanical method: It uses a contact probe, directly attached to the axis of rotation. A measuring wheel is placed on the adapter to measure either speed or length. The tachometer can be used to measure the speed of: engines, pumps, turbines, centrifuge...

SA 2404 REFLECTIVE ADHESIVE STRIP

For AC 5103 1 strip: L.200mmxl.10mm

TESTING TOOLS ELECTRONIC

OM 0200 12 PIECES AIRBAG MAINTENANCE TOOL BOX

Depend on the application, the removal tools are to be used in pairs. Composition: 5 socket bits 1/4"D. 80mm long • T30 Audi, Opel, Renault, VW • T30 temperproof Audi, BMW, Mercedes, Opel • T25 BMW • T25 tamperproof BMW • 5mm hex Audi 7 Specialist keys : • 2pcs set (always use pairwise) for Golf4, New Beetle, T4, Seat, Fabia, Octavia (from 1999) • 2pcs set (always use pairwise) for Lupo, Passat B5, Polo (from 1999), A4, A6, Superb • 1pc universally applicable, for removing the inside spring ring on VW cars

2 • 1pc for Bora (from 1999), Golf 4 (1998 to 2004), Passat (from 1997) • 1pc for New Bettle (1999 to 2004), Golf, Jetta, Passat

AC 7013 AIRBAG LINE TEST KIT

3 4

The kit consists of 2x2 boxes. The tool simulates the presence of the igniter by substituting it with a resistance.

OM 2002 SET OF PULLERS FOR EXTRACTING CONNECTION PLUGS

OM 0205 CAR-RADIO REMOVAL TOOL KIT

5 6

OE 5115 CONNECTOR KIT FOR ELECTRICAL MEASURING TOOLS This set of electrical connectors lets you read measurements without damaging the vehicle.

Potentiometer variablevariable resister. resister. Potentiometer 2 5kΩ. 5kΩ.

Allows to simulate the Allows to simulate the probe signal resistive probe&signal & resistive sensor from 0 to 5kΩ. sensor from 0 to 5kΩ.

Led stroboscope. Led stroboscope.

Allows to control the signals. Allows to control the signals. Indicates de polarity thanks thanks Indicates de polarity to a changing color. color. to a changing

Srs connector. Srs connector.

Maintenance tool for tool the for the Maintenance airbag replacement. airbag replacement.

AlligatorAlligator clip. clip.

Can beCan connected to be connected to mesure mesure tools : multimeter, tools : multimeter, oscilloscope… oscilloscope…

Testing probe. Testing probe.

Can beCan connected to the to the be connected provided cables extensions provided cables extensions and to mesure tools : tools : and to mesure multimeter, oscilloscope… multimeter, oscilloscope…

AcicularAcicular probe. probe.

Ø 0,7 mm - Length 30 mm. 30 mm. Ø 0,7 mm - Length

Double Double connector: allows allows connector: the connection in parallel the connection in parallel 2 of a measurement tool on tool on of a measurement a thread a wiring a or thread or atermination. wiring termination. simple connector. simple connector.

Male terminals connectable Male terminals connectable 36 with a mesuring tool. tool. with a mesuring

Round: Round: 1,6 mm 1,6 - 3 mm pieces - 3 yellow pieces yellow 2,3 mm 2,3 - 3 mm pieces - 3 red pieces red 3,5 mm 3,5 - 3 mm pieces - 3 black pieces black 3,9 mm 3,9 - 3 mm pieces - 3 blue pieces blue

FemaleFemale terminals connectable terminals connectable 36 with a mesuring tool. tool. with a mesuring 2

Flat: Flat: 0,6 x 0,60,6 - 3xpieces 0,6 - 3 yellow pieces yellow 0,6 x 0,90,6 - 3xpieces 0,9 - 3 red pieces red 0,6 x 1,30,6 - 3xpieces 1,3 - 3 black pieces black 0,6 x 1,90,6 - 3xpieces 1,9 - 3 blue pieces blue 0,6 x 2,30,6 - 3xpieces 2,3 - 3 yellow pieces yellow 0,8 x 2,80,8 - 3xpieces 2,8 - 3 red pieces red 0,8 x 4,70,8 - 3xpieces 4,7 - 3 black pieces black 0,8 x 6,00,8 - 3xpieces 6,0 - 3 blue pieces blue Round: Round: 1,6 mm 1,6 - 3 mm pieces - 3 yellow pieces yellow 2,3 mm 2,3 - 3 mm pieces - 3 red pieces red 3,5 mm 3,5 - 3 mm pieces - 3 black pieces black 3,9 mm 3,9 - 3 mm pieces - 3 blue pieces blue

Compatible with measurement instruments: multimeters, oscilloscopes, etc.

7 8 9 10 11 81

TESTING TOOLS LPG

AC 9901 LPG DETECTION KIT

Kit includes: • 1 magnifying glass • 1 mirror • 1 LED light OE0128 • 1x400ml PH neutral aerosol leak detector • 1 electronic gas leak detector

6 7

Meets the latest directives for technical inspections.

AC 6497 GAS LEAK DETECTOR

4 5

For use in LPG technical inspections and by specialists A specially-designed case to detect leaks in LPG vehicles. This leak detector has a flexible probe to reach the most difficult places. Leaks are indicated by visual and sound signals whose frequency increases closer to the leak: A fast, efficient means of locating leaks with precision.

SA 6500 PH NEUTRAL AEROSOL LEAK DETECTER 400

INTENDED FOR TECHNICAL INSPECTIONS AND LPG SPECIALISTS Use: The gas leak detector is designed for fast and reliable detection of non-sealed LPG gas installations. Resolution: 100 ppm (particles per million)/bar • Display range: bis CH4 0.5% • Reaction time: < 2 seconds • Bar and LED diagram • Monitor size ~20mmx7mm • Operation T°: -5 to 40° • Storage T°: -25 to 40° • Operation humidity: RF 20 to 80% • Length. Gooseneck: 355mm • Weight: 200g

8 9 10

For AC 1014

Delivered with calibration certificate

AC 6498 ROUND MAGNIFYING GLASS Ø75mm

SA 6497 SENSOR For AC 6497

OE 0128 PENLIGHT 6 SMD LED+MAGNET

OM 8074 TELESCOPIC MIRROR 228mm-715mm

NEW

Stainless steel mirror

63x45mm

• • • • • •

Supplied with 3xAAA 1.5V batteries 6x0.5W SMD LED Light intensity: 250 Lumens, 6000K Aluminium body 180 degree swivel belt clip with magnet Dimensions: 158x16x30mm

228mm

11 82

715mm

AC 2013 DUAL LASER HEADLIGHT ADJUSTMENT DEVICE • • • • • •

TESTING TOOLS HEADLIGHT ADJUSTMENT

Laser pointing Digital luxmeter Sliding mechanism Inclination setting Thermoplastic optical box Automatically check and measure headlamp misalignments and measure light power regardless of type of lamp (xenon, halogen, led, etc.)

TECHNICAL DATAS • Width: 580mm • Lenght: 712mm • Height: 1810mm • Weight: 20kg • Supply voltage: 9V DC • Field of light intensity reading: 0-150klux/1m 0-240lux/25m • Vertical deviation: 0-4% • Horizontal orientation: ± 5cm/10m

Optimized transport: Packing dimensions: W.60cmxL.80cmxH.50cm Gross weight: 22kg

Aluminium column in two pieces

4 5

AC 2010 LASER POSITIONING ADJUSTER Backlit LCD screen

• Automatically check and resolve headlamp and foglamp specs • Automatically check and measure headlamp misalignments and measure light power regardless of type of lamp (xenon;, halogen, led, etc.) • Electronically assisted lamp focusing. Complies with standards 2006/42/EC and UTAC SR/V/041

6 Aluminium column

Laser side positioning

Characteristics: • Counterweighted up/down. • 4x1.2V rechargeable batteries supplied (3h30m fast recharge) • 16h battery life plus 100 checks • Automatic sleep mode • Supplied with protective cover

Printed output includes: • Registration No. • Date • Test result Aluminium column

Optional gear (on demand) • Positioning rail

To comply with this directive, your device must be able to justify the drawdown percentage as per the height of the headlight lens.

Extract from the French Directive SR/V/041 (France) Specifications for the control of the lightening device adjustment of the vehicle […] 6. e) allow a measure of the beam lead angle with a maximum measure error between "-0,2%" & "+0,2%" (see example)

Measuring zone range between-5,5% et -3,5%

Source : Utabc Valid from 2010/01/01

Inclinaison

+2% +9% Horizontal -0,5% -1%

Example : Basis value : 0,5% Value accepted on the device display : -0,3% to -0,7%.

-2,5% -3%

+9% +9%

-4%

Annexe 1 : Target model

11 83

TESTING TOOLS AIRCON

1 2

3 4 5 6 7 8 9 10 11 84

OE 5027 INFRARED THERMOMETER -50°/1350°

Reliable measurements with a high quality laser sight. This thermometer allows safe contactless measurements.

• Power supply 9V battery • Weight 180g

OE 5036 INFRARED THERMOMETER -38°/520°

Characteristics: • Temperature range: -38°C/520°C (-36.4°F/968°F) • Accuracy: ± 2°C • Response time: 1s • Resolution: 0.1C°.0.1°F • Brightness automatic stop after 15s • Automatic switch off after 60s • Power source: 1.5V battery (x2) • Dimensions: 160x118x40mm • Weight: 155g batteries included

NEW

AC 4225 DUAL-ZONE THERMOMETER Used for diagnosing aircon systems, recommended for dual-zone climate control systems (can instantaneously compare values) Characteristics: • 2 measurement sensors (cables 940mm) • Displays both values simultaneously • Measures min and max

• • • •

Units: Celsius, Fahrenheit Digital display Hold function Powered by 4x1.5V (AAA) batteries

AC 4226 AIRSPEED-TEMPERATURE INDICATOR Lets you check air flow and temperature Used to diagnose aircon circuits and their air propulsion system Characteristics: • Indicates if T° drops below 0° • Measurement units : m/s, km/h, ft/min, mph • Measures point speed, average speed, maximum speed • Digital display • Battery indicator

TESTING TOOLS AIRCON

AC 4223 DIGITAL THERMOMETER

Characteristics: • Digital display • Temperature range : - 40° to 250°C • Stainless steel sensor • Automatic stop • Accurate to : ±1° (between 200°C and 250°C) ±2° (between -40°C and 200°C)

AC 4224 DIGITAL ELECTRONIC THERMOMETER

Characteristics: • Digital display • Temperature range : -50° to 300°C • Stainless steel sensor • Pressure + or -1°C • Battery power 1/5V AAA • Cable lenght: 900mm • Probe lenght: 170mm • Cable + Probe (with handle): 1200mm

AC 4228 SET OF 4 COUPLING PUSH BUTTONS

3 4 5

Dimensions 3/8", 1/4", 5/8", 3/4"

AC 4048 R12/R134 CORE REMOVER

AC 4008 SPECIAL A/C JOINTS BOX

6 7 8

AC 4027 AIRCON ADAPTER RENAULT

For AC 4041/AC 4042/AC 4040

SA 4054 LOW PRESSURE COUPLER FOR GAS 1234YF

SA 4052 HIGH PRESSURE COUPLER FOR GAS 1234YF

For AC 1012/AC 1014

AC 4029 SET OF 2 COUPLINGS 1/4" HIGH/LOW PRESSURE

10 11 85

TESTING TOOLS AIRCON

1 2

AC 5028 ELECTRONIC STETHOSCOPE LEAK DETECTOR • • • • •

6 7 8

Can be operated with 2x9V batteries (6f22 type) Response frequency: 36000Hz to 44000Hz Operating temperature: 0°C to 40°C Storage temperature: -10°C to 50°C Weight: amplifier 183g/tansmitter 156g

Composition: • Amplifier 176x84x35mm • Ultrasonic transmitter 170x84x36mm • Headphones • Alu stethoscope probe 250mm • Plastic amplifier tube 270mm • Carrying case

4 5

The electronic stethoscope lets you, simply by touching with the tip during static testing, transmit the sound made by the target through headphones to locate engine pinging, bearing noise, slapping, etc. It also lets you detect air leaks normally imperceptible by the human ear by making the ultrasounds made by an airflow audible.

AC 6495 CFC-HFC-R134A-HCFC COOLING GAS LEAK DETECTOR This leak detector with an electrolyte sensor is designed to detect the most minute concentrations of cooling gases such as R-134a, HCFC and CFC. When a concentration of gas is detected, an audible alert sounds then the digital display indicates the leakage value. • • • • • • • • • •

Sensitivity: 1.5gr/yr (R134a) Type of sensor : heated electrolyte sensor Sensor life : 300 hours Response time : instantaneous Power source : 4xAA alkaline batteries Battery life : 8 hours continuous Preheat time : < 20s Length of probe : 43cm Digital display : 7 levels Comes with a case, batteries and test flask

Recalibration: contact us

SA 6495 FILTER+SENSOR+TESTING FLUID

9 10

For AC 6495

SA 1090 1kg NITRO-TRACE CYLINDER 1

For AC 1014/AC 1015 1kg: Nitrogen 95% and hydrogen 5%

11 86

COMPLIES WITH EN 14624

SA 6500 PH NEUTRAL AEROSOL LEAK DETECTER 400

TESTING TOOLS AIRCON

AC 1015 NITROGEN-BASED AIRCON LEAK DETECTION KIT NEW

The equipment contained in the suitcase allows to "pressurize" the air conditioning and cooling installations, and to "simulate" inside the installations the pressure at which this system will then have to work. By pressurizing the installation with technical nitrogen (with an appropriate pressure according to the coolant, as indicated by the sectors on the manometer), the fitter can be sure that in case of leaks due to badly made clampings, "cold" welds or manufacturing defects, those imperfections will be pointed out through a loss of nitrogen detected by the gauge designed for it. Then the controlled installation will not have any of this problem anymore.

1 2

Content: • Suitcase • Nitrogen reducer with safety valve up to 50bar • Reducer for 1kg bottles • 1 Adapter for returnable bottle gas • Hoses Ø900mm • Sector manometer equipped with a ball valve • 1kg bottle (Nitrogen 95% hydrogen 5%)

4 5 6 7

SA 4053 N2 TEST UNIT WITH GAUGE AND BALL VALVE

For AC 1012/AC 1014

This gauge will allow you to isolate nitrogen hydrogenated injected in the cooling system. Indeed, to control sealing, you must inject a precise amount of nitrogen (see manufacturer’s procedure). Thanks to its 1/4 valve, you will be able to isolate it from the car and then measure the gas quantity injected. Then, you just have to set the needle by hand on the other one (as a marker) and find leaks.

SA 4054 LOW PRESSURE COUPLER FOR GAS 1234YF

SA 4052 HIGH PRESSURE COUPLER FOR GAS 1234YF

For AC 1012/AC 1014

9 10 11 87

TESTING TOOLS AIRCON

1 2

3 4

AC 4041 AIRCON CONTROL PANEL Composition: • Charge hose • Fast connection • AC4050: LED UV lamp • Batteries • AC4045: concentrate tracer for 10 jobs • Screw loading pump • SA1002: UV googles

AC 4045 TRACER REFILL

AC 4042 ECO CONTROL KIT Composition : • 1 AC 4045 (10 tests) • 1 screw injector

For AC 4041/AC 4042

5 6 7

• For a screw loading pump for AC 4041 panel • 10 interventions

AC 4050 LED UV LAMP 7

• Pushbutton • Rubber • 3x1.5V AA LR6 batteries

AC 4040 A/C LEAK SEALER Can be used with R12 and R134 Comes with a low pressure adapter

= 60g of R134a

For Renault, see p. 85

SA 1002 UV GLASSES

AC 4038 LEAK SEALER REFILL

For AC 4040

11 88

EN 166 : 2001 EN 170 : 2003

= 60g of R134a

• 1 hose • 1 connector

TESTING TOOLS AIRCON

AC 4009 AIR CONDITIONING BOX 155 PIECES

This kit contains the elements for the air-conditioning systems maintenance whom work with r134a.

Composition: • Valves high flow and standard flow • High pressure plug • Low pressure plug • r12/r134A converter - Low pressure (connection 1/4") • r12/r134A converter - High pressure (connection 1/4") • Valve remover

Elements available retail.

4 AC 4030 PACK OF 50 RED PLUGS

AC 4031 PACK OF 50 BLUE PLUGS

OM 5032 KIT WITH CLAMPS + PLUGS FOR LINES – HOSES – BANJO CONNECTORS

5 6 7 8

Contents: • 2 hose clamps : lock Ø7.94mm • 2 clamps for BANJO connectors • 1 hose clamp : Ømax 26mm • 6 conical plugs: Ø4 to 9mm

9 10 11 89

TESTING TOOLS COOLING SYSTEM

HU 0031 FLUID COLLECTION CONTAINER 35

Dimensions: 780x495x120mm Max. wheelbase :920mm Capacity max: 35 liters Equipped with 4 swiveling wheels 2 carry handles Pouring spout

HU 2299 FLEXIBLE FUNNEL Thanks to its flexibility and shape-memory, this funnel lets you collect or dispense fluid in the tightest spaces. Compatible with brake fluid, hydraulic fluid, cooling fluid, oil and petrol/diesel fuel

L.360xl.170mm

4 5 6

AC 4065 REFRACTOMETER

For checking: • Cooling liquid 0 to -50°C • Battery liquid density: 1.1 to 1.4kg/l • Windshield washer liquid 0 to -40°C • AD Blue

Integrated Light

7 8

AC 3300 CO DETECTION KIT • Checks for combustion gases in the radiator. • The test fluid changes colour if a leak is detected. • Fast identification of defective head gasket.

2- Put the bulb on the tube and squeeze it a few times. Any gas in the cooling system mixes with the tracking fluid. The blue tracking fluid changes colour (turns yellow) if there is an internal combustion fault that forces CO into the cooling fluid.

9 10 11 90

1- With the engine hot, take off the radiator cap or the expansion-tub cap and pour in the indicated dose of the tracking fluid.

15 tests

AC 3350 CO DETECTION FLUID For AC 3300

1 refill = 15 tests

TESTING TOOLS COOLING SYSTEM

OM 5010 HOSE CLAMP Ø8-13mm For flexible hose lines Ø8 to 13mm

OM 5030 HOSE CLAMP Ø19-Ø56mm

For flexible hose lines Ø19 to 56mm

OM 5020 HOSE CLAMP Ø13-19mm

For flexible hose lines Ø13 to 19mm

OM 5103 3 CLAMPS SET • For hoses Ø8 to 13mm • For hoses Ø13 to 19mm • For hoses Ø19 to 56mm

OM 9278 UNIVERSAL CRIMPING PLIER

700

Tool remotely operatable by cable, for installing/removing the entire range of self-tightening elastic clamps Ø18 to 54mm, even in difficult to reach places.

Opening: 55mm

7 8

OM 9389 PLIER FOR COLLARS

This multidirectional plier makes easier the removal of self-tensioning clamps (water, fuel, air) which are not easy to reach.

• Opening: 70mm • Non-slip handles

9 10 11 91

TESTING TOOLS COOLING SYSTEM

Do a fast and simple check of your cooling system by pressurizing the cooling circuit, connecting this device in place of the expansion tank stopper.

AC 1001 HGV COOLING LINE TESTER

• • • •

3 4 5 6 7 8 9 10 11 92

AC 1100 COOLING LINE TESTER Sealing system per inflatable membrane: • Universal system • Line pressurisation system to locate leaks (radiator, line, head gasket, hoses, water pump, etc.) Composition : • 3-bar pressure test pump • Air line • Charge hose • Replacement membrane • Universal plug • 2 adapters (VWs and Japanese vehicles)

Inflatable cuff SA2400

Ø60mm

SA 2400 INFLATABLE CUFF

For AC 1100

1.Installation of universal plug. Sealing system per inflatable cuff. 2.Pump is used to pressurise the line: 3.Check the needle (indicator) position. Loss of pressure = sealing problem.

Pump with 7 metal plugs. Relief valve. 0-2.5bar pressure gauge. Suitable for: DAF, IVECO, MERCEDES, MAN, RENAULT, SCANIA, VOLVO and similar.

TESTING TOOLS COOLING SYSTEM

AC 1150 COOLING LINE TESTER

Composition: • 1 test pump with pressure relief valve • 0 to 2.5bar pressure gauge • 16 ABS screwed plugs (colour and number coded) • 3x1/4 turn metal plugs • 0 to 200°c thermometer • 2x1/4 turn plug test adapters

2 Covers 98% of the automotive park

SA 1150 RADIATOR CAP N°22 BMW/MINI/LAND ROVER

3 4

For AC 1150

AC 1000 COOLING SYSTEM TESTER

Allows circuit to be pressurized Quick connect, fully watertight plugs Range of plugs with latest models for all commercial vehicles and most HGV Allow immediate detection of circuit condition and cause of the leak (cuffs, sleeves, cylinder head gasket, etc...) Pump and plugs sold retail

6 7

New pump equipped with a pressure relief valve

Procedure: A) Remove the radiator plug and clean the joint bearings (possible scale). For the test, attach the plug adapted to the type of nozzle to the radiator: 1) Bayonet connector Choose the size of the plug for the radiator you are testing. Screw the plug onto the bladed part. Fix the coupling’s 2 metal blades onto the nozzle; Turn the upper knob to make sure it is watertight 2) Coupling screw Screw the plug onto the radiator and check that the rubber trim is correctly placed.

B) Attach the radiator tester to the plug using the quick connect located at the end of the pipe. C) Activate the pump until pressure is about 1 Bar. If the pressure gauge needle stays still for about 1 minute, the circuit is working correctly. If the needle goes down, it means that there are leaks in the circuit, which can easily be located from where water is coming out. If the pressure gauge goes down and no leak is found, the state of wear of the engine’s cylinder head gasket needs to be checked.

10 Plugs sold retail

11 93

TESTING TOOLS COOLING SYSTEM

This station is designed to drain, test, flush and refill the cooling system with its venturi system coopling to a gauge.

AC 1005 COOLING FLUID REPLACEMENT DEVICE 35

This station permits an ecological intervention avoiding coolant seepage so it is possible to dismount any parts properly.

The workshop is kept clean, no pollution on the floor

• It permits to bleed the system without open the air bleeder • Two tanks are designed to contain the new and the old coolant separate • Easy to connect to the cooling system by the connectors provided • Works with air pressure between 5 to 8bar • Dimension: 480x650x1050mm • Weight: 60 kg

5 6 7 8

2 swivelling wheels with brake

AC 1008 7-PART COOLING-FLUID REPLACEMENT KIT

Conical adaptor and universal plugs Ø28-45mm

HU 0514 FUNNEL KIT Ø165mm 3 PCS Funnel with flexible spout, filter and hose.

AC 1104 COOLING LINE FILLING DEVICE

9 10 11 94

• Ø165mm funnel with filter (L.480mm) • Complete with flexible spout • Flexible clear hose 3/8" L.600mm

Pressure loss system that forces fast total refilling of the circuit. Compressed air is used to empty the system. Supplied with three different-sized nozzles The tool requires the system to have been emptied

AC 5004 BRAKE FLUID TESTER PROBE

AC 5006 BRAKE FLUID TESTER

TESTING TOOLS BRAKING

Lets you read the humidity level and quality of brake fluid Lets you read the humidity level and quality of brake fluid

Dot 3-4-5

3 4 AC 5022 BRAKE FLUID + BOILING POINT TESTER + PRINTER ADAPTER

AC 5021 BRAKE FLUID + BOILING POINT TESTER Device powered via 2 clips connected to the car battery, supplied with its accessories. Lets you accurately check the boiling point in 째C/째F of the DOT fluid. Approved by many car-makers.

Device powered via 2 clips connected to the car battery, supplied with its accessories. Lets you accurately check the boiling point in 째C/째F of the DOT fluid. Approved by many car-makers. Works identically to the AC 5021 tester and can be connected to AC5023 printer.

6 7

Braking see p.208

AC 5023 PRINTER FOR TESTER For AC 5022

9 SA 1025 SET OF 4 ROLLS PRINTING PAPER

For AC 5023 4 rolls paper for AC5023

11 95

TESTING TOOLS DRAINING

Using the oil pressure gauge, you can see the oil pressure at any one time.

AC 4011 OIL PRESSURE GAUGE 130

Composition: • 1x0-10bar pressure gauge with pressure reducer • 1300mm line with fast connector • Fast connector elbow (90°) • 10 oil pressure switch activated adaptors • For all engines (diesel and petrol)

3 4

HU 4002 OIL GAUGE/DIPSTICK FOR AUDI ELECTRONIC OIL LEVEL SYSTEM This oil gauge and dipstick is designed for measuring the oil levels on different Audi engines fitted with electronic oil level system. Applications:: • 2.0 TFSI, 3.2 FSI, 3.0 Supercharged, 4.3 FSI, 2.0 TDI CR • OEM: T40178 Can also be used to assist the calibration of the driver’s instrument panel.

5 6

Setting values Année/Year Moteur/Engine Réglage bague/Ring setting Valeur min/min scale Valeur max Max scale

≥ 2009 2.0 TFSI 39 0 24

HU 0511 OIL CAN 500ml 500

≥ 2009 3.2 FSI 123 0 13

≥ 2009 3.0 Supercharged 123 0 13

≥ 2009 4.2 FSI 175 0 23

≥ 2009 2.0 TDI CR 62 0 24

HU 4004 4 OIL DIPSTICKS FOR MOTOR CONTROL & AUTOMATIC GEARBOXES MERCEDES This set of 4 dipsticks is designed to measure the oil level of engines and automatic gearboxes. It is essential after an oil change, since Mercedes vehicles are sold without any dipstick (tubes are only sealed by a simple cap).

8 9

AC 4050 LED UV LAMP 7

10 11 96

SA 1002 UV GLASSES • Pushbutton • Rubber • 3x1.5V AA LR6 batteries EN 166 : 2001 EN 170 : 2003

AC 4046 OIL PETROL DIESEL TRACERS 25

6 doses of concentrated tracers (25ml per dose)

TESTING TOOLS FUEL

AC 0310 POWER STEERING TESTER

This kit allows to control the hydraulic pumps for power-steering by pressure direct measure, depending on the circuit flow rate, including high temperatures, thanks to the reinforced flexible hose. Easy to install on the high-pressure outlet of the hydraulic pump (or on a pressure outlet, depending on the manufacturer). It’s universal thanks to its different diameter connectors. The gauge supplied is tapped at 140bar and can support up to 120°C. That allows the user to proceed to a reliable diagnosis of a vehicle safety device.

2 Content : • Gauge 0-140bar with isolation tap • Reinforced flexible hose 0-120°C • Universal connectors for circuit/pump connections

OM 4045 UNIVERSAL BELT PULLEY PULLER Ø40-63mm

3 4

Less space requirement

This universal belt pulley puller 3 arms is made for the damage free drawing off of pulley belts.

6 • • • •

To remove 2 to 9 arm pulleys (30mm max) Universal suitable for several diameters (ext. Ø90mm max) Suited for working on and finishing engines No suitable for 1.5DCI (see OM 3413)

EG 0525 405 PIECES RING JOINTS BOX

OM 0080 DIESEL INJECTOR LINE SOCKETS SET BMWVAG-MERCEDES Ø12-14-16-17-18-19 BMW/VAG/MERCEDES

8 9

10 11 97

TESTING TOOLS FUEL

1 2

3 4

DIESEL STARTING PURGING KIT

Modern diesel engines need to generate fuel pressures in excess of 2000bar to work efficiently. Air in the fuel line adversely affects engine performance. When servicing the fuel and line and installing a new fuel filter, air gets into the line. Most modern systems incorporate an automatic purge or manual pump permanently installed in the vehicle. However, for many fuel lines, it takes some time to purge all the air in the line.

AC 4090 DIESEL STARTING PURGING KIT However, for many fuel lines, it takes some time to purge all the air in the line. Modern diesel engines use two main fuel-supply methods: • Positive-pressure feed : this uses an electric pump installed in the fuel tank to push the fuel to the highpressure pump. • Negative-pressure feed : this uses a motorised vacuum pump to generate a vacuum which draws the fuel to the highpressure pump. The tools in this kit have been developed to be connected to diesel fuel lines using the carmaker’s connections.

5 6

Contents of 6 connection kits: • Renault-GM-Fiat small Ø • Renault- GM- Fiat large Ø • Ford • PSA 10mm • PSA 8mm • PSA connector 10mm

7 8 9 10

OM 9389 PLIER FOR COLLARS This multidirectional plier makes easier the removal of self-tensioning clamps (water, fuel, air) which are not easy to reach.

11 98

• Opening: 70mm • Non-slip handles

TESTING TOOLS FUEL

OM 0610 3 PLIERS SET

OM 0510 1/2" D. 27mm WRENCH FOR FUEL FILTERS

Composition: • 1 plier for GM/ FIAT/FORD • 1x8mm plier • 1x10mm plier

Firmly grips the 6 sides of the plastic cap and prevents it deteriorating. Lets you tighten to the recommended torque.

OM 0504 PETROL AND DIESEL FUEL CONNECTION PLIER

OM 9268 FUEL CONNECTOR PLIERS, OPEL/FIAT/VW

Suitable for: • PSA • Volvo • Ford • Mitsubishi

OM 9267 FUEL FILTER WRENCH PSA/RENAULT

4 Ø108mm 3/8" square

160mm

150mm

HU 2027 DIESEL FUEL FILTER REMOVAL KIT

OM 9245 DIESEL FILTER CUP WRENCH

Lets you easily remove filter cups Ø109mm Applications: Chevrolet, Citroën, Fiat, Saab, Suzuki, Vauxhall, Opel Engines: 1.3 JTD-CDTI-DDIS 1.9 JTD-CDTI-TID 2.0 VCDI-HDI-JTD 2.2 JTD-HDI 2.8 JTD-HDI 3.0 JTD-HDI

7 6 notches 17mm deep

HU 9258 ADJUSTABLE PLIER FOR OIL FILTERS

HU 9257 ADJUSTABLE PLIER FOR OIL FILTERS HGV

Ø80 to 190mm

Ø57 to Ø120mm

10 400

11 99

TESTING TOOLS FUEL

1 2

3 4

AC 4065 REFRACTOMETER

Integrated Light

For checking: • Cooling liquid 0 to -50°C • Battery liquid density: 1.1 to 1.4kg/l • Windshield washer liquid 0 to -40°C • AD Blue

OM 9210 FILTER SPANNER Ø46mm MERCEDES BLUE-TEC

5 6

HU 0011 TRANSFER PUMP FOR DRUMS 200L

A composite material has been supplied specifically to reduce the staining from adblue. also suitable for other fluids like water, diesel, oil...

7 8 9

HU 0645 ADAPTER FOR DRUMS M/F Ø55mm NEW Side lever barrel pump suitable for pumping various (non corrosive) liquids such as oil, diesel, anti freeze and washer fluid from standard 200l drums.

10 11 100

HU 0013 ROTARY PUMP SUITABLE FOR ADBLUE

• Extending tube to reach the bottom of drums

• Supplied with a 2" bsp fitting • 0.3 litre per revolution • Inlet tube 1000mm

HU 0647 ADAPTER FOR DRUMS Ø70mm

NEW

OM 4665 FUEL TANK SENDER SPANNER SET Universal tool 3 adjustable arms to lay or remove the reservoir hatches nuts.

TESTING TOOLS FUEL

Arms opening: 65 to 180mm

Content: • Arm support with hex drive 24mm • 5 sets of 3 arms

3 4

HU 0629 FUEL TRANSFER PUMP

130

Supplied with transfer hoses

OP 3503 PNEUMATIC FUEL SUCKER DISRIBUTOR DRUM 60kg

2 System complies with Atex standard 94/9 Ideal design sucks fuel or diesel, operates with a pneumatic pump equipped with special Viton gaskets.

7 8

• Pump mounted on 60kg drum dolly, equipped with 2 fixed wheels and 2 swivelling wheels • Suction hose L.2m • Discharge hose L.2m • Flexible probes Ø8 and 12mm • Feeding 6-8bar • Flow (sucking) relative 23 litres/min

9 10

Hose connectors 6-810mm

11 101

TESTING TOOLS VIDEOSCOPE

1 2

AC 5029 VIDEOSCOPE RECORDER PROBE Ø5.5mm 1000

This videoscope recorder is a visual diagnosis tool that lets you check the condition of the engine’s internal moving parts without dismantling it.

Probe Ø: 5.5mm Metal connector: safe-lock connector SD card and USB slots

4 5 6 7 8 9

Example: It is based on a compression probe that identifies out-of-tolerance readings; the videoscope lets you visualise the inside of a cylinder to determine the cause of a fault (deteriorated valve, cylinder, piston...). This tool is ideal for viewing inaccessible places such as plug wells, the insides of door panels, part identification numbers... The camera head has an LED light source. Also, the image inverter, zoom, luminosity adjuster, let you capture high quality photos and videos. The photo video ‘Save’ function lets you create files that can be used for appraisals, litigation, etc. You can also use those files to explain to customers and help them understand the diagnosis and repairs done.

AC 5028 ELECTRONIC STETHOSCOPE LEAK DETECTOR The electronic stethoscope lets you, simply by touching with the tip during static testing, transmit the sound made by the target through headphones to locate engine pinging, bearing noise, slapping, etc. It also lets you detect air leaks normally imperceptible by the human ear by making the ultrasounds made by an airflow audible.

10 11 102

• • • • •

Can be operated with 2x9V batteries (6f22 type) Response frequency: 36000Hz to 44000Hz Operating temperature: 0°C to 40°C Storage temperature: -10°C to 50°C Weight: amplifier 183g/tansmitter 156g Composition: • Amplifier 176x84x35mm • Ultrasonic transmitter 170x84x36mm • Headphones • Alu stethoscope probe 250mm • Plastic amplifier tube 270mm • Carrying case

Characteristics: • LED light source with adjustable intensity (0-275 Lux) • Extra-wide 90mm TFT colour screen 640x480pixels • Fast saving of videos and photos • Zoomx1.5 • Innovative "vertical symmetry" (image inversion) function • Memory card stores up to 1,000 photos • USB and video ports make transferring to your PC easy • SD card • Semi-rigid metal probe IP67 • Angle of vision 60° • Power source : 4xAA batteries, 2h battery life

TESTING TOOLS ENGINE

AC 0400 SMOKE MACHINE

1 Thanks to non toxic smoke, this machine allows to detect a potential leak in a hermetic fitting, a hose, a seal, a rubber part etc. It uses compressed air and must be connected to a 12V vehicle battery thanks to crocodile pliers. Easy to use: stop-up on first side the circuit to be controlled and send smoke on the other side.

Ideal for turbo circuits (intercooled, hoses...) or cooling systems (radiators, hoses...).

Air pressure gauge

3 4 5 6 7

Content: • 4 conical hose obturators • 1 joint for conical obturators • 1 cable with pliers • 1 product ampulla • 1 empty empulla

8 9 10 After the setting of the obturators and fittings, the circuit to be controlled is pressurized and the detection smoke expels through the leak.

Nozzles test

11 103

TESTING TOOLS ENGINE

1 2

AC 0566 OCR CONTROLLED VALVE ACTUATOR (EGR-TURBO...) Activates OCR* controlled valves (*Opening Cyclic Ratio): • EGR valves • Idle governors • Motorised butterfly valves • Solenoid valves... As well as being a diagnostic tool, it has the ability to keep actuators in open position thereby allowing control of the variable pressure in a turbo. It makes it possible to clean the EGR valve (as some makers recommend) by keeping it open, which avoids replacing it. • Idle governors • Motorised butterfly valves • Solenoids

4 5 6

Composition : 1 OCR control box 1 connector Renault 1 universal connectors

HU 0550 METAL PRESSURE AND VACUUM PUMP (-1/+ 4bar) To test: advance vacuum curve pressure regulator for fuel, LPG, EGR valve (exhaust fumes) TURBO... delivered in a composite case

7 8 9

SA 8071: 360° rotating pressure gauge Turbo oversupply pressure testing

Advance vacuum curve testing

Watertightness testing for fuel injection pump LDA membrane

Brake servo-unit membrane testing

10 11 104

Fuel pressure regulator watertightness testing

Pressure relief valve testing

EGR valve testing

Auxiliary vacuum pump testing

AC 1180 LEAK TESTING PLUG KIT

TESTING TOOLS ENGINE

This control item allows to pressurize any system related to the admission under pressure as for vehicles equipped with a turbo or a compressor in order to detect any leakage rapidly and accurately. The box contains 4 conical obturators of various diameters, 4 conical obturators of various diameters with quick coupler air-inlet, and pressurizing device with obturating coupler and a wheel-valve type entry.

3 4 Easy to fit, you just have to isolate a component as turbo, durits, etc… and to place on one side the obturator, and on the other side the pressurizing device (traditional tyre-gauge). Once the circuit pressurized, securized by the safety-valve at 0.9bar, the user will be able to detect the leaks listening to the noise.

AC 0550 PRESSURE VACUUM PUMP (-9/+4bar)

5 6 7 8

Content: • 1 set of 5 tips • 1 set 4 pipe extensions + 4 tips • Collection container with 2 lids • Two 500mm extensions

9 10 11 105

TESTING TOOLS ENGINE

AC 4013 MULTIPOINT TESTER

This box has the most common adapters for testing all types of injections.

Suitable for most of the park: Renault, Peugeot, Citroën, Fiat, Opel etc.

3 4 5

• 1 double scale pressure gauge from 0 to 100psi • 1 pressure gauge for 0 to 10psi (precise readings) • Quick connects, straights, banjo, T, for single point and multi-point fuel injection systems

To complete this kit, CLAS recommand item AC5243 to test the injecters Piezo Pressures

The tester allows to control: The pump of force-feeding (diesel), pump (gasoline) Pressure regulator Pressure of the circuit Residual pressure HP lid pumps (diesel CP1, CP3)

8 9 10

AC 5243 INJECTOR RETURN PRESSURE FLOW TESTER

For Piezo Common Rail injectors For: Bosch, VDO/Siemens, Delphi systems allows to detect air presence in the system Supplied in box

11 106

TESTING TOOLS ENGINE

AC 4019 FUEL/TURBO PRESSURE CONTROL KIT/(-1 + 9bar) CLAS has put together this versatile testing kit specially to diagnose low pressure fuel supply circuits in petrol and diesel engines; as well as turbo pressure and depression of solenoid valve pneumatic control circuits.

Content: • A pressure/vacuum gauge (with a quick connect) • 3 metres of pipe for fuel pressure testing on the road • 3 metres of pipe for air pressure testing on the road • A T-joint that adapts to the low pressure fuel circuit • A T-joint (with standardized couplings) that adapts to the low pressure fuel circuit.

Certified gauge

With this box with its kit of fuel pressure couplings and an air pressure coupling, a single pressure gauge can cover all your pressure and vacuum tests from -1 to +9bar

OE 7100 ULTRASOUND TANK

5 SA 7070 TUB OF ULTRASOUND CLEANING SOLUTION 2L

1.2

• • • • •

Power supply: 220V-50Hz Power 70W Dimensions ext.: 230x180x155mm Dimensions tub: 160x130x60mm 5-cycle: 90-180-280-380-480 seconds

For OE 7100

Approximate capacity: 1.2l

AC 5019 FUEL SYNCHRONISATION KIT This kit lets you synchronise the values of the 4 carburettors as well as adjust/set them.

Composition : • 4 mano of synchronization with fixed frames (vacuum) • 4 rubber pipes 8x5x750mm • 4 Tubes of extension 3.9x52mm and 4 tubes 3.9x122mm • 8 Tubes of conical type 8x40mm • 4 Tubes 10x53mm ( M6x0.75) • 4 Tubes 10x60mm ( M6x1.0)

6 7 8 9 10 11 107

TESTING TOOLS ENGINE

1 2

AC 0100 PETROL COMPRESSION GAUGE • High precision easy-to-read large-scale 5-17bar table • Tool-less fast connection

AC 0110 50-PART FUEL DIAGRAM

4 5 6

Supplied with : • 3 adaptors : M10, M12, M18 • 50 diagrams AC 0110 8 attempt write database (+2 in reserve)

Dimensions : L.73mmxW. 66mm

AC 0115 PETROL COMPRESSION GAUGE Comes with M10 M12 M14 M18 connectors 0-20bar pressure gauge + universal adaptors

AC 0118 CYLINDER LEAK DETECTOR TESTER This item allows to control the tightness of the cylinders without opening the engine. It’s one of the simplest and fastest tests to use to check the engine’s condition. Air is injected through the plug well in each cylinder, and the dial indicates if there’s any pressure loss. Engine compression leaks can damage valves, wear segments, crack the cylinder head gasket or the cylinder head. That’s easy. A cylinder at top dead center, with its 2 valves closed, must be totally hermetic. If the cylinder doesn’t keep its pressure, it means there’s a defect. Injecting a measured quantity of pressurized air in the cylinder and observing possible losses either on the dial or visually (bubbles issuing form the expansion tank) or by ear, you can easily estimate the tightness of the engine. • Worn segment will let the air leak by the oil pan then by the sniffle valve • Defective exhaust valve will let the air leak by the exhaust system • Faulty inlet valve will let the air issue from the carburetor or the air filter • A cracked cylinder head or a damaged cylinder head gasket will let the air issue form the expansion tank or from the radiator cap.

8 9 10 11 108

Recommended by manufacturers

For AC 0100

The adapters supplied with this equipment fit with all the plug wells (10, 12, 14, 18mm) and the long adapter is very usefull for the plugs with deep wells, as mounted on various vehicles.

OM 0018 MAGNETIC SPARK PLUG WRENCH 14mm L.250mm 3/8" External Ø19mm

TESTING TOOLS ENGINE

AC 0200 DIESEL COMPRESSION GAUGE

Connection method using dummy injectors or glow plugs. Compatible with AC2024. Easy-to-use.

• Supplied with AC 0210 : 50 high-precision, easy-to-read, 10-40bar diagrams • 8 attempt write database (+2 in reserve)

AC 0210 50 PART DIESEL DIAGRAM Dimensions: L.73mmxW. 66mm For AC 0200 Industryrecognised constructors

SA 2116 QUICK CONNECT ADAPTER GLOW PLUGS

3 4

For AC 0200/AC 2024

AC 2024 DIESEL GLOW PLUG KIT

For AC 0200/AC 0118/AC 2016

Glow-plug kit (diesel and common rail) that can connect to AC0200 pressure gauges and AC0118 seal sensors. Covers 90% of vehicles. (Specifics available on request.)

SA 2209 GLOW PLUG 1.5-1.9 DCI

SA 2016 GAUGE WITH HOSE

For AC 0200/AC 2016/AC 0118

For AC 2016/AC 2015

AC 2016 DIESEL ENGINE COMPRESSION MASTER TEST KIT

Complete kit for all direct and indirect injection diesel engines

• Fast connection adapter • 355mm line for difficult access • 0/70bar pressure gauge Common-rail & HGV dummy injectors with clamps

Covers 90% of vehicles + common-rail injection systems

6 7 8 9 10 11 109

TESTING TOOLS INJECTOR

1 2

AC 5240 COMMON RAIL INJECTOR TESTER Covers most vehicles with Bosch Denso, Delphi and Siemens Common Rail injectors (not Opel). This set can detect flow problems in injectors.

C1 C2 C3 C4

SA 5240 PACK OF 6 CRAYONS

Bosch 90° injectors VDO/Siemens 90° injectors Denso 90° injectors Delphi 45° PVC injectors

For AC 5240

4 5 6

SA 5241 SET OF 6 VIALS + HOLDER + PIPES

A) The engine turns over but doesn’t start. Placing the graduated crayons allows you to see what the problem is: • If all the levels are similar: The injectors are working properly. • If you see that one level is considerably higher than the others (25%), that injector is damaged The method is faster: • Direct connection to the injector • The fuel goes directly into the crayons.

For AC 5240

SA 5242 PACK OF 24 CONNECTORS

For AC 5240

Set of 24 connectors C1/C2/C3/C4

7 8 9 10 11 110

B) The engine starts. We advise using the vials (See diagram)

Vial 4 Excess flow: replace the injector

TESTING TOOLS INJECTOR

AC 5243 INJECTOR RETURN PRESSURE FLOW TESTER

Injection systems with piezoelectric injectors require specific diagnostic methods that are appropriate for their technicality. This flow and return pressure testing kit is an essential tool for any work on these systems to establish precisely faults linked to injectors and optimise diagnosis. In order to test the flow and return pressure of piezoelectric injectors, this set includes two pressure gauges and the specific couplings to connect to the injector’s return circuit for diagnosis of the following systems: • Bosch, VDO/Siemens: pressure gauge pressure range from -1 to +15bar • Delphi: pressure gauge pressure range from -1 to +3bar

For Piezo Common Rail injectors For: Bosch, VDO/Siemens, Delphi systems allows to detect air presence in the system

Certified gauge

Principle of diagnosis after connecting the device: The engine doesn’t start • Turn the starter briefly several times so that the control unit fills with fuel • Turn the starter for about 10 seconds and, at the same time, read the pressure or vacuum on vacuum gauge • Compare the value in effect to the theorical value (theorical value = manufacturer's indications)

The engine starts Start the engine and keep running in neutral until the transparent part is totally full of fuel • Read the pressure or vacuum on vacuum gauge • The transparent part allows to detect air presence in the circuit

5 Supplied in box

AC 4015 DIESEL FUME EXTRACTOR

Improves visual trials of injectors and sucks out any spray. • Clip to hold the injector • Compressed air reducer • Apparatus to protect the user’s health

AC 4012 PUMP 600bar FOR INJECTOR CALIBRATION To check the diesel injectors: blocked openings, pressure and shape of jets

Warranty: Never use this pump with diesel or other fluid, use only our special SA 3013 fluid shown opposite.

SA 3013 2L CAN OF SPECIFIC OIL 2

For AC 4012 Pump supply lines supplied with connections and pressure gauge

Specific liquid for injector calibration.

10 11 111

TESTING TOOLS INJECTOR

1 2

AC 4018 COMMON-RAIL HIGH-PRESSURE TESTER SYSTEM (0-1600bar) Diagnoses malfunctions in common-rail injector systems by reporting direct pressure exiting the high-pressure pump. From the read value, the operator can efficiently determine and diagnose any malfunctions due to too-high pressure at the common-rail injection pump. The measurements can be taken with the machinery running or shut down (on startup).

Certified gauge

4 5

Release screw

Composition: â&#x20AC;˘ 1 calibrated high-pressure gauge (0 to 1600bar) â&#x20AC;˘ 2 threaded M12x1.5 pressurised hose connections (connecting between the HP pump and the common pump)

6 7 8

AC 4022 HIGH PRESSURE COMMON RAIL PUMP TESTER (0-1000bar) Analog device to test top pressure with various connection lines to check the high-pressure pump at engine startup.

Certified gauge

9 Gauge from 0 to 1000bar

10 11 112

Comes with elbows and universal adapters Elbow M12x1.5 Elbow M14x1.5

CAUTION: Use only in startup phase

TECHNICAL TOOLS

CONTENTS

1 INJECTOR

2 3

4 5 6

PLUG

ENGINE

CLUTCH

CYLINDER HEAD

EXHAUST

STEERING ROD

BALL JOINT

SILENT-BLOCK

7 8

DRIVE SHAFT

SHOCK ABSORBER

BRAKING

9 10 11 114

CLEANING

WHEEL

115 124 131 176 178 183 185 187 189 195 202 208 220 222

TECHNICAL TOOLS INJECTOR OH 0027 UNIVERSAL INJECTOR MECHANICAL-HYDRAULIC EXTRACTION KIT Max.

This kit lets you extract Bosch, Siemens, Delphi, Denso injectors. Two extraction solutions possible: mechanical (screw) or mechanical-hydraulic (12T cylinder).

2 3

4 5 6 7 8 Mecanical-hydraulic ram: no hydraulic pump required

9 Composition: • 4 releasing wrenches for the electromagnetic part (Ø25-27-29-30mm) • OM 9277: 1 releasing hex wrench for electrodes Ø10mm • 4 traction bolts (M18x1.5-M17x1 Bosch, M18x1.5-M14x1.5 Delphi, M18x1.5-M27x1 Siemens Piezo, M18x1.5-M25x1 Siemens Piezo) • SA2700: Mechanical-hydraulic ram 12T • Attachment and assembly accessories

10 11 115

TECHNICAL TOOLS INJECTOR

OP 1480 8 PCES SPECIAL VIBRO CHISEL SET Content: • 1 pneumatic gun (capacity 2200bpm, operating pressure 5 to 8bar, consumption 114l/min, noice level 100dB) • 2 circular shaped blocks Ø74 and 38mm and 1 rounded hollow block Ø63mm + support • 2 hollow blocks Ø22mm • 1x1/2" D. block for impact sockets • O-rings

2 3

OH 0025 INJECTOR MECHANICAL-HYDRAULIC EXTRACTOR 12T

Max.

Necessary tool for easy extraction of injectors which are stuck into cylinder head. Thanks to its small size, it can be used directly on the vehicle in addition to mechanical extractor.

• • • • • • •

6 Contents: • SA0025: • SA0019: • SA0018: • SA0020: • SA2700:

7 8

Maximum stroke: 8mm Dimensions: Ø80x55mm Screw torque: 67mm Pressure: 700bar Weight: 2.5kg Cylinder port: Ø21.5mm Recommanded fluid viscosity: -15/100mm2

Long extraction screw M18x1.5-M17x1 for OH0025/OH0027 Long extraction screw M18x1.5-M25x1 for OH0025/OH0027 Long extraction screw M18x1.5-M27x1 for OH0025/OH0027 Long extraction screw M18x1.5-M14x1 for OH0025/OH0027 12T mecanical-hydraulic ram for OH0025/OH0027

OM 9366 INJECTOR EXTRACTOR RENAULT/NISSAN/OPEL 2.0-2.2-2.5 DCI

Injectors: Bosch, Bosch Piezo

Models: Renault: Mégane 2-3, Scénic 2-3, Vel Satis, Laguna 2-3, Espace 3-4, Master 2-3, Trafic 2-3, Koleos Opel: Movano, Vivaro Nissan: Interstar, Primastar, Kubistar Engines: 2.0-2.2-2.5 DCI Codes: G9T, G9U, M9R

10 11 116

Chisel set for an easier removal of corroded, seized or crimped parts.

TECHNICAL TOOLS INJECTOR

OM 9276 INJECTOR EXTRACTOR PSA 2.0-2.2 HDI

1 2 3

4 SA 9276 INJECTOR EXTRACTION SCREW For OM 9276/OH 0027/OM 9250

Injectors: Bosch, Siemens Models: Peugeot: 307, 307cc, 308, 407, 407 coupé, 607, 806 (16V), 807, Expert Citroen: C4, C5 II, C5 III, Sinergie, Evasion, Dispatch, Jumpy, C8 Fiat: Ulysse, Scudo Lancia: Phedra, Zeta Engines: PSA: 2.0 HDI (only 16V), 2.2 HDI Fiat/Lancia : 2.0 JTD, 2.2 JTD Codes: RTH, RHW, 4HW, RHT, RHM, RHR, RHK

5 6 7

OM 9250 INJECTOR EXTRACTOR KIT ALFA/FIAT/LANCIA

Models: Fiat: 500, Punto, Grande, Panda, Idea, Doblo, Stilo, Qubo, Bravo, Sedici, Croma, Ducato Lancia: Ypsillon, Musa, Delta Alfa Roméo: Mito, 147, 159, Brera Opel: Corsa (C-D), Agila B, Meriva, Astra (H), Astra GTC, Tigra (B), Combo Tour, Vectra (C), Insignia, Zafira (B), Vivaro, Movano Suzuki: Ignis, Splash, Swift, Wagon R+, Sx4, Grand Vitara Engines: Fiat: 1.3 Multijet 16V, 1.6 Multijet 16V, 1.9 Multijet 16V, 2.0 Multijet 16V, 2.3 Multijet, 3.0 Multijet Lancia/Alfa Roméo: 1.3 Multijet 16V, 1.6 Multijet 16V, 1.9 Multijet 16V, 2.0 Multijet 16V Opel: 1.3 CDTI, 1.9 CDTI, 2.0 CDTI Suzuki: 1.3 DDIS 16V, 1.9 DDIS 16V

11 117

TECHNICAL TOOLS INJECTOR OM 4022 INERTIAL INJECTOR EXTRACTOR BOSH/DELPHY

Allows you to extract blocked injectors without removing them or the head. Internal grip 16mm

2 3

36 Supplied with extender, 3.5kg weight

Masse à inertie 3,5kg

SA 4026 ADAPTOR M18-M22 Internal grip 16mm

SA 9026 FORK Ø16mm For OM 4022/OM 4033

8 9

For OM 4022/OM 4033

SA 4222 ADAPTOR

For OM 4022/OM 4033

SA 4023 EXTERNAL GRIP ADAPTER BOSCH INJECTORS For OM 4022/OM 4033

For OM 4022/OM 4202/OM 4033

10 118

SA 4024 INTERNAL GRIP ADAPTER BOSCH INJECTORS

OM 9242 INJECTOR EXTRACTOR ADAPTER VW

OM 9236 INJECTOR EXTRACTOR SIEMENS

For OM 9240/OM 4022/OM 4033

Adapter M18x1.75 threading For OM 4022/OM 4033 Applications: Siemmens injectors Brands: Peugeot, Citroën, Ford, Toyota, Suzuki, Fiat Engines: 1.4-1.6-1.9-2.0-2.2

Fork internal grip 14mm

TECHNICAL TOOLS INJECTOR

OM 4033 SLIDE HAMMER 7.5kg

1 Designed to furnish high impact forces, it is used by placing both hands on the sliding weight. Shaft threaded at both ends 5/18" UNF thread at one end and metric M18x1.5 at the other making it compatible with injector adapters, hub extractors, etc.

2 3

4 • • • •

Total length 765mm Shaft length 660mm Weight of inertial extractor: 7.5kg Double threaded shaft to suit adapters: 5/18" UNF

OM 4224 INJECTOR ADAPTOR M18x150

For OM 4022/OM 4033

This ball joint was designed for inertial weight OM4022 and OM4033 for injectors that have seized up or blocked, facilitating the access to the extractor for small size vehicles. Examples : Espace, Scénic, C4 Picasso... with advanced windscreen bay.

OM 4202 ADAPTERS FOR BOSCH AND DELPHI INJECTORS

For OM 4022/OM 4033

9 10 Contents: • Bosch Adapter M20xM17x1.0 • Delphi adapter M20xM14x1.5 • Electrode removal spanner hex Ø10mm • Reducer M20x5/8" UNF

11 119

TECHNICAL TOOLS INJECTOR

1 2 3

OM 5310 INJECTOR EXTRACTOR KIT MERCEDES/CHRYSLER 2.1-2.2-3.0V6 CDI Engine removal not required Models: Mercedes: Vito, Vario, CLK, Sprinter, Viano, Classe M, GL, C, GLK, E, CLS, S, R, G Chrysler: 300 C Engines: Mercedes: 2.1, 2.2, 3.0 V6 Chrysler: 3.0 V6

Content: • SA9276: Main body with extractor M18x1.5 Bosch (2.1-2.2) • Main body with extractor M18x.1.5-M14x1.5 Delphi (3.0V6) • 1/2" D. Injector socket double hex 29mm • OM9277: 1/2" D. Injector socket hex 10mm • Extraction device (2.1-2.2) • Extraction supports (3.0V6)

OM 0075 INJECTOR EXTRACTION KIT MERCEDES CDI

Sprinter-Vito-Viano-Vario OM0611/OM0612/ OM0613/OM0646/ OM0647/OM0648

7 8 9 10 11 120

up to 2000

OM 9237 INJECTOR EXTRACTOR BMW COMMON RAIL For BMW M47TU, M57 and M57TU

OM 9261 INJECTOR-HOLDER REMOVAL SPANNER VAN/HGV

OM 9277 ELECTRODE REMOVAL SPANNER Ø10mm

TECHNICAL TOOLS INJECTOR

Lets you remove the internal electrode of common rail injectors Ø10mm hex.

2 3

OM 0070 1/2" D. SOCKET SET FOR INSTALLING/REMOVING INJECTORS HOLDERS

• SA0081 : 1x22mm hex socket length 110mm with window • SA0082 : 1x22mm double hex socket length 78mm with window

• SA0083 : 1x27mm double hex socket length 78mm with window • SA0084 : 1x28mm hex spanner length 78mm with window

OM 0071 1/2" D. HEX SOCKETS SET FOR REMOVING DIESEL INJECTORS HEADS

25-27-29-30mm

SA 0781 SOCKET 1/2"D. Ø27mm

For OM 0071

OM 0080 DIESEL INJECTOR LINE SOCKETS SET BMW-VAG-MERCEDES Ø12-14-16-17-18-19

OM 6058 1/2" 58T PRECHAMBER SOCKET DIESEL ENGINES

8 NEW

9 10

BMW/VAG/MERCEDES

Suitable for diesel engines Opel 2.0DI, 2.2 DI with OEM codes X20DTL, X20DTH,X22DTH ; Mercedes CDI, 601, 602, 603, 605, 606, 661, 662

11 121

TECHNICAL TOOLS INJECTOR

This kit lets you clean injector seats and wells. The depth-adjustable reamer support lets you reshape the gasket seat without damaging it.

OM 9100 COMPLETE INJECTOR SEAT CLEANING KIT

Contents: • OM9280: 1 injector gasket extractor • 1 reamer support • 1 brush drive line • SA9110: 2 small diameter injector well brushes • SA9111: 2 large diameter injector well brushes • 1 brush support • 6 injector well plugs • 2 flat reamers Ø17mm • 1 conical reamer Ø17mm

4 5

OM 9285 INJECTOR SEAT CLEANING KIT Cleaning is essential to maintain sealtightness when replacing the injector. • Ø17mm-19mm Bosch (stepped) • Ø15,5mm Bosch • Ø17mm Delphi • Ø17mm Siemens • Injector nozzle cleaning tool • Blower with reducer

6 7 8

Contents: • 1 conical reamer Ø17.6mm • 1 guide Ø20.5mm • 1x170mm extension

OE 7100 ULTRASOUND TANK OM 9297 INJECTOR SEAT CLEANING KIT

9 10 11 122

OM 9399 INJECTOR SEAT CLEANING REAMER VAG

Applications: PSA, Renault, Ford, Mercedes CRD-CRDI, Fiat/Iveco... Injections: Bosch-Delphi-Siemens

Contents: • 1 tool holder+closed end spanner • 3 flat reamers: Ø1517mm • 2 conical reamers: Ø17mm

1.2

• Power supply: 220V-50Hz • Power 70W • Dimensions ext.: 230x180x155mm • Dimensions tub: 160x130x60mm • 5-cycle: 90-180-280-380480 seconds Approximate capacity: 1.2l

SA 7070 TUB OF ULTRASOUND CLEANING SOLUTION 2l 2

For OE 7100

OM 0666 BORE BRUSH SET Steel-Nylon-Brass Ø8 to Ø19mm

TECHNICAL TOOLS INJECTOR SA 0638 SA 0639 10 PCS 18mm BRASS BRUSHES SET 10 PCS 19mm BRASS BRUSHES SET For OM 0666

For OM 0666

SA 0618 SA 0619 10 PCES 18mm NYLON BRUSHES SET 10 PCS 19mm NYLON BRUSHES SET

OM 9275 INERTIAL INJECTOR GASKET EXRACTOR

For OM 0666

SA 0628 10 PCS 18mm STEEL BRUSHES SET

SA 0629 10 PCS 19mm STEEL BRUSHES SET

For OM 0666

OM 9280 INJECTOR SEAL RING REMOVER

1 2 3

OM 9326 INJECTOR WELL PLUGS Ø7mm chamfered

5 6

EG 0407 PNEUMATIC PORTABLE VACUUM

Lets you vacuum in hard-to-reach places (plug wells, etc...)

8 Supplied with 3 tips + 1 extender

OP 0053 PNEUMATIC VACUUM BRAKE BLEEDER 1

Used to vacuum out impurities: injector wells, plug wells, etc.

9 10

Lets you empty the brake fluid reservoir and bleed the brake lines.

Bleed screw adapter

11 123

TECHNICAL TOOLS PLUG This device is designed to test the status of diesel glow plugs quickly and easily. It let you know if the glow plug is to be be replaced or not thanks to graphical display without any languages.

AC 5300 GLOW PLUG ANALYSER

1 2

Multitension

11V

10V

8.5V

4.4V

5 • Beep alarm to help the user to analyse the glow plug status • Built-in torch light enables the user to work in the darkness • A backlit LCD makes the analyser easy to read in all lighting conditions • Auto switch-off helps to conserve battery life if the user forgets to turn it off

6 7 8

OM 9213 SET OF 6 PLUG SPANNERS Friction CV joint that lets it stay in the ideal position Plug retention gasket

OM 0005 POLYGON RACHET WRENCH 8-10mm

9 m

10 11 124

OM 0006 POLYGON RATCHET WRENCH 8-12mm

OM 0018 MAGNETIC SPARK PLUG WRENCH 14mm L.250mm 3/8

OM 9262 SET OF INSERTS Ø14x125mm FOR GLOWPLUGS

TECHNICAL TOOLS PLUG

External Ø19mm

AC 0518 METRIC SIZE FEELER GAUGE Contents: • SA9268: • SA9265: • SA9266: • SA9267:

• 20 blades • 0.05 to 1mm • Resolution: 0.05mm

OM 6012 1/4" D 6 SIDES PSG GLOW PLUG SOCKET 12mm+PSG PROTECTION CAPS Suitable for Audi, Opel et VW engines with OEM codes GM 55564163/55577419, Opel 18 26 354/12 14 061, VW 03L905 061 D

staged tap M16 5 threaded inserts M14x125 11.2mm 5 threaded inserts M14x125 17.5mm 5 threaded inserts M14x125 17.5mm in brass

AC 5106 SET OF 4 IGNITION TESTERS

LED-based testers

NEW

5 6

Composition: • 12mm socket • 5 PSG protection caps

OM 9286 GLOWPLUG REPAIR KIT Ø9mm

OM 3787 GLOWPLUG REPAIR KIT M8x100 M10x100 M10X125 M12x125

7 8 9 10

Composition : • 6 repair taps (M8x100-M10x100-M10x125-M12x100-M12x125-M14x125) • 2 insertion tools • 3 plug well plugs • 5 inserts: SA3785 (M8x100), SA3786 (M10x100), SA3787 (M10x125), SA3788 (M12x125)

11 125

TECHNICAL TOOLS PLUG

1 2

4 pre-set torque settings: 10-20-30 or 40Nm

OP 1404 VIBRATION GLOW PLUG REMOVAL KIT NEW Connection: 1/4"

4 5 6 7 8 9 10 11 126

Comes with: • 5 sockets 8-9-10-11-12mm • 1 universal joint 1/4 • 2 impact extension bars

OM 9103 GLOW PLUG TORQUE LIMITED SOCKETS SET Ø8, 10, 12mm 3/8" D. This kit is designed for tighten glow plug to the torque recommended by the manufacturer. Thanks to their own calibration, you don’t need a torque wrench. You can also use them to loosen (no torque). By tightening, when the socket reach its maximum torque, the head is automatically released with no risks of over tighten the glow plug. Composition: • 8mm 12 point socket. Torque 15Nm • 10mm 12 point socket. Torque 18Nm • 12mm 12 point socket. Torque 18Nm • 3/8" or 19mm hex head drive • Total length: 108mm • Head length: 40mm

A joint inside the head helps removal

OM 3782 GLOW PLUG PULLER KIT M9x100 FIAT 1.3MJ

Models: Alfa: 145, 146, 147, 156, 159, 166, GT, Crosswagon Q4 Fiat: Punto, Grande Punto, Bravo/ Brava, Marea, Weekend, Stilo, Doblò/Cargo, Multipla, Idea, Panda Lancia: Ypsilon, Musa, Lybra, Thesys Opel: Corsa, Agila, Meriva, Combo Tour, Astra, Zafira, Vectra Suzuki: Ignis, Swift, Wagon R+ Ford: Ka Engines: 1.3 JTD MultiJet, 1.3 CDTI, 1.3 TDCI

TECHNICAL TOOLS PLUG

OM 3778 DAMAGED GLOWPLUG EXTRACTION SET M8-M10

Lets you remove deteriorated or broken glowplugs. For tapping glowplugs M8-M10 (VW-Audi, Mercedes, Opel, Peugeot, Renault etc.)

2 3

Sold retail

Contents: • Top connection removal Torx socket • Pilot drill centring sleeves (2pcs) & Pilot drills Ø3.5mm (2pcs) • Dual-size step drill M10 (Ø9x4mm) • Dual-size step drill M8 (Ø7x4.2mm) • Drill holding adaptor

• • • • • •

Tap 1/4" Tap M8 Tap M10 Ratchet T-Bar SA5334: force screw (2pcs) Puller adaptor mandrels

5 6

SA 5328 SA 5333 PILOT DRILL CENTRING SLEEVE STEP DRILL Ø4-9mm For OM 3778

SA 5335 TAP M10x1 For OM 3778

SA 5337 TAP 1/4" -28 For OM 3778

SA 5334 FORCE SCREW

For OM 3778

SA 5336 TAP M8x1

For OM 3778

SA 5341 3.5mm DRILL

For OM 3778

11 127

TECHNICAL TOOLS PLUG

Kit for the extraction of the electrode final part impossible to remove in case of breakage or seizure inside the seat of M8 glow plug. This user friendly kit allows to reduce the working time and costs.

OM 3769 M8 GLOW PLUG ELECTRODE EXTRACTION KIT SPECIAL 1.4-1.6 HDI-TDCI

2 3

4 5 6 7 8 9 10 11 128

Blind drilling thanks to the guide

Composition : • M4 extraction rod fitted with nut • SA3764: M4 male fitted with extension • M8 glow plug extraction slide hammer • SA3763: Ø3.2 tip fitted with extension • M8x1 glow plug guide Models: Citroën: Xsara, Xsara break, Xsara coupé, Xsara Picasso, Berlingo, C2, C3, C3 pluriel, C4, C4 grand Picasso, C5, C5 break, DS3 Suzuki: Liana, Kombi Toyota: Aygo Mazda: 2 Volvo: S 40, V 50 Ford: C-Max, Fiesta, Focus, Focus C-Max, Focus ll, Fusion Peugeot: 107, 206, 207, 208, 307, 308, 407, 1007, 3008 Engines: 1.4 HDI, 1.6 HDI, 1.4 HDI 16V, 1.6 HDI 16V, 1.6 HDI 110 FAP, 1.4 DDIS, 1.4 CD, 1.6 D, 1.4 TDCI, 1.6 TDCI, 1.4 HDI ECO 70 Codes: 8HX (DV4TD), 8HZ (DV4TD), 9HZ (DV6TED4), 8HY (DV4TED4), 9HX (DV6ATED4), 9HY (DV6TED4), 2WZTV, F6JA, D4164T, HHDA, HHDB, G8DA, G8DB, G8DD, GPDA, F6JB, HHJA, HHJB

OM 3768 M8-M9 GLOW PLUG ELECTRODE EXTRACTION KIT

TECHNICAL TOOLS PLUG

Kit for the extraction of the electrode final part impossible to remove in case of breakage or seizure inside the seat of M8 or M9 glow plug. This user friendly kit allows to reduce the working time and costs.

2 3 Blind drilling thanks to the guide

Composition : • M3 extraction rod fitted with nut • SA3762: M3 male fitted with extension • M8-M9 glow plug extraction slide hammer • SA3761: Ø2.5 tip fitted with extension • M8x1 glow plug guide • M9x1 glow plug guide

4 5 6

OM 3770 KIT FOR M10 GLOW PLUG ELECTRODE EXTRACTION Kit for the extraction of the electrode final part impossible to remove in case of breakage or seizure inside the seat of M10 glow plug. This user friendly kit allows to reduce the working time and costs.

7 8

Blind drilling thanks to the guide

Composition : • M4 extraction rod fitted with nut • M10x1 glow plug guide • SA3766: M4 male fitted with extension • M10 glow plug extraction slide hammer • SA3765: Ø3.2 tip fitted with extension • M10x1.25 glow plug guide

9 10 11 129

TECHNICAL TOOLS PLUG

1 2 3

4 5

OM 9077 GLOW PLUG EXTRACTION WRENCHES KIT

Superslim helical wrenches Kit specially designed for extracting glow plugs with damaged hexagonal faces. Use only for extracting the glowplug when the bottom of the hexagonal head is damaged.

OM 9299 GLOWPLUG CLEANING KIT M8-M10-M12 Glowplugs are subject to extreme conditions : heat, scaling... The composition lets you clean the plug holder before installing the new plug. This ensures optimal preheating, a safety measure to protect against breakage during removal.

6 Contents: • 1 reamer support (1/4" chuck and 13mm hex) • 4 adapters : M12x1.25-M10x1.25-M10x1-M8x1 • 3 cleaning reamers

7 8

OM 9256 GLOW PLUG EXTRACTOR MERCEDES CDI

9 10 11 130

Contents: • 2 reamers M10x1-M12x1,25 • Vice grip • Suitable for (Mercedes codes) : OM604, OM605, OM606, OM611, OM612, OM613, OM646, OM647, OM648 (2.1, 2.2, 2.7, 3.2 CDI)

TECHNICAL TOOLS ENGINE

OM 7200 UNIVERSAL ENGINE SUPPORT LV-CV Max.

350

360°

Can be used when the transmission jack, crane or the engine support cannot be used. Ex : 207, 307, commercial vehicles

2 3

opic

Télésc

• • • • •

Articulated head on ball joint 350kg Extensions 630-960mm Rubber covered Height adjustable Weight : 7.20kg

Essential for working alone on gearboxes, water pumps, brake pads, etc.

OH 0249 2 HOOKS SWIVELLING ENGINE SUPPORT

NEW

6 1700mm 150mm

• Directional feet • 1 chain connection with ball bearing • L.1700mm

SA 0220 BALL BEARING KIT

7 8

For OH 0233/OH 0239/OH 0243/OH 0249

OH 0243 SWIVELLING ENGINE SUPPORT

Swivelling mounts are essential on vehicles with sloping bonnet design (206, Twingo, etc.). Width adjustable • Directional feet • 1 chain connection with ball bearing • L.1500mm

NEW

9 10

1500mm 150mm

11 131

TECHNICAL TOOLS ENGINE

OM 9898 7 DRAWERS TIMING TOOL TROLLEY RENAULT/PSA/VAG

2 3

4 5 6

Composition: • EG0085: 7 drawers tool roller cabinet • OM6100: timing tools Renault/Nissan/Opel/Volvo • OM6200: timing tools PSA • OM6300: timing tools Ford/VAG

7 Timing tool finder with OEM codes p.422

8 9 10 OM 6100

11 132

OM 6200

Components cleary identifiable available retail

OM 6300

TECHNICAL TOOLS ENGINE

OM 9899 MULTI-BRAND 7 DRAWERS TIMING TOOL TROLLEY

1 2 3 Composition: • EG0085: 7 drawers tool roller cabinet • OM6100: timing tools Renault/Nissan/Opel/Volvo • OM6200: timing tools PSA • OM6300: timing tools Ford/VAG • OM6400: timing tools Fiat/Alfa/Lancia/Opel/Suzuki/Ford • OM6500: timing tools Opel/Chevrolet/Saab/Fiat/Lancia/ Suzuki/Ford • OM6600: timing tools Ford/VW/Seat/Mazda/Volvo

4 5 6 7 8

OM 6100

OM 6200

OM 6300

9 10 OM 6400

OM 6500 Components cleary identifiable available retail

OM 6600

11 133

TECHNICAL TOOLS ENGINE

OM 6100 MASTER TIMING TOOL SET RENAULT/NISSAN/OPEL/VOLVO

2 3

570mm

4 375mm

5 6 7 8 9 10 11 134

Models: Renault: Clio 1-2-3-4, Clio Sport 1-2-3, Mégane 1-2-3, Master 1-2, Mégane Scénic 1-2-3, Vel Satis 1-2, Avantime, Kangoo 1-2-3, Laguna 1-2-3, Espace 1-23, Trafic 1-2, Wind, Modus, Twingo, Koleos Dacia: Logan, Duster, Sandero, Dokker Nissan: Note, Qashqai, Micra, Interstar, Primastar, Kubistar, Almera, Primera Opel: Vivaro, Movano Volvo: S 40, V 40 Engines: 1.2-1.2 16V-1.4-1.4 16V-1.5 DCI-1.6-1.6 16V-1.6 D-1.7-1.8-1.8 16V-1.9 TD-1,9-1.9 DCI-1.9 DTI-1.9 CDTI-2.0-2.0 16V-2.1 TD-2.2-2.2 DCI-2.2 DTI-2.2 TD-2.5 DCI-2.5 CDTI-2.5 TD-2.8 D Codes: D4F702/706/708/712/714/716/722/728/730/740/764 D7F700/701/710/720/722/726/730/744/746/764/766 E7F700/704/706/750 E7J601/624/626/634/635/680/700/706/710/711/716/718/719/720 /724/726/728/740/742/745/754/756/757/764/770/771/773/780 F3P670/682/700/704/706/708/710/712/714/720/724/755/758/7 60 F7P704/722 F3R611/722/723/728/729/750/751/752/791/796/797/798 F5R700/701/740 J7R732/733/734/735/768 F7R710/714 J7T600/760/761/762/766/772/780/782 N7Q704/710/711

N7U700/701 K4J700/710/711/712/713/714/715/730/732/740/750/770/780 K4M700/701/704/706/707/708/709/710/711/712/714/716/718/72 0/724/730/732/734/736/740/742/743/744/745/746/748/750/752 /753/754/760/761/762/764/765/766/768/776/782/788/790/791/ 794/800/801/802/804/812/813/830 K9K700/702/704/706/710/712/714/716/718/722/724/728/729/73 2/734/740/750/752/760/762/764/766/768/802/804/806 F9Q610/650/664/670/674/71/716/717/718/720/722/730/731/732 /733/734/736/738/740/744/748/750/752/754/758/759/760/768/ 762/770/772/774/780/782/784/786/788/790/796/800/803/804/8 08/812/816/818/820 G9T600/605/700/702/703/706/707/710/712/720/722/742/743/7 50 G9U720/724/726/730/750/754 F8M736/760 F8Q600/610/606/620/622/624/630/632/640/644/646/648/662/67 2/678/680/682/684/692/696/706/714/720/722/730/732/740/742 /744/764/768/706/776/784/786/788 J8S620/621/622/758/760/776/778 G8T714/716/740/752/760/790/792/794 S8U720/722/730/731/742/748/750/752/770/772/780/782 S9U700/702/704/714/740 S9W700/702/206/208/212 E5F, E6J, K7M, F4P/F4R, F1N, F2N, F3N, F2R, F3P, F4P, F3R, J5T, J6R, J7R

TECHNICAL TOOLS ENGINE NÂ°

OEM CODE

REF

DESIGNATION

MOT 1054 KM-6031 KV113 B0280

SA 6101

CRANKSHAFT LOCKING PIN

MOT 1489 KV113 B0130

SA 6102

CRANKSHAFT LOCKING PIN

MOT 1496 MOT 1750

SA 6103

CAMSHAFT LOCKING TOOL

MOT 1490-01

SA 6104

CAMSHAFT PULLEY ALIGNMENT TOOL

MOT 1348

SA 6105

TENSIONING TOOL

MOT 1312

SA 6106

TENSIONING TOOL

MOT 1384

SA 6107

TENSIONING TOOL

MOT 1135-01

SA 6108

TENSIONING TOOL

MOT 1337

SA 6109

CAMSHAFT LOCKING TOOL

MOT 1386

SA 6110

TENSIONING TOOL

MOT 1340

SA 6111

CRANKSHAFT LOCKING PIN

MOT 1386

SA 6112

TENSIONING TOOL

MOT 910

SA 6113

CRANKSHAFT LOCKING PIN

MOT 910

SA 6114

CRANKSHAFT LOCKING PIN

MOT 1318

SA 6115

CRANKSHAFT LOCKING PIN

SA 6116

SCREW M6x45mm

SA 6117

SCREW M8x80mm

MOT 1543 KM-6234 KV113 B0360

SA 6118

TENSIONING TOOL

MOT 1543 KM-6234 KV113 B0360

SA 6119

TENSIONING TOOL

MOT 1489

SA 6120

CRANKSHAFT LOCKING PIN

MOT 1536 KM-6203

SA 6121

CRANKSHAFT LOCKING PIN

MOT 1054

SA 6122

CRANKSHAFT LOCKING PIN

MOT 1543 KM-6234 KV113 B0360

SA 6123

TENSIONING TOOL

MOT 1534 KM-6205

SA 6124

CAMSHAFT LOCKING TOOL

MOT 1537 KM-6204

SA 6125

CAMSHAFT LOCKING TOOL

MOT 1543 KM-6234 KV113 B0360

SA 6126

TENSIONING TOOL

MOT 1543 KM-6234 KV113 B0360

SA 6127

TENSIONING TOOL

MOT 1538

SA 6128

INJECTION PUMP LOCKING PIN

MOT 1200-01

SA 6130

INJECTION PUMP LOCKING PIN

MOT 1496 MOT 1750

SA 6131

CAMSHAFT LOCKING TOOL

Timing tool finder with OEM codes p.422

1 2 3

4 5 6 7 8 9 10 11 135

TECHNICAL TOOLS ENGINE

1 2 3

4 5 6 7

OM 4005 TIMING TOOLS RENAULT/NISSAN

Models: Renault: Clio 2-3-4, Clio Sport 2-3, Mégane 2-3, Mégane Scenic 1-2-3, Vel Satis 1-2, Avantime, Kangoo 2-3, Laguna 1-2-3, Espace 2-3, Modus, Koleos Dacia: Logan, Duster, Sandero, Dokker Nissan: Note, Qashqai, Micra, Kubistar, Almera, Primera Engines: 1.4 16V, 1.6 16V, 1.8 16V, 2.0 16V, 2.0 16V turbo, 1.5 DCI Codes: K4J700/710/711/712/713/714/715/730/732/ 740/750/770/780 K4M700/701/704/706/707/708/709/710/711/712/7 14/716/718/720/724/730/732/734/736/740/742/7 43/744/745/746/748/750/752/753/754/760/761/7 62/764/765/766/768/776/782/788/790/791/794/8 00/801/802/804/812/813/830

K9K700/ 702/704/706/710/712/714/716/718/722/724/728/ 729/732/734/740/750/752/760/762/764/766/768/ 802/804/806 F4P, F4R (OM3627 required)

OM 3674 TIMING TOOLS RENAULT/OPEL/NISSAN/SUZUKI DCI

Models: Renault: Clio, Kangoo, Laguna, Espace, Master, Mégane/Scénic, Trafic Nissan: Kubistar, Interstar, Qashqai Opel: Vivaro, Movano Suzuki: Gran Vitara Engines: 1.5 DCI, 1.9 TD, 1.9 DCI, 2.2 DCI, 2.5 DCI Codes: K9K 700, K9K 702, K9K 704, K9K 706, K9K 710, K9K 712, K9K 714, K9K 716, K9K 718, K9K 722, K9K 724, K9K 728, K9K 729, K9K 732, K9K 734, K9K 750, K9K 752, K9K 760, K9K 762, K9K 764, K9K 766, K9K 768, K9K 790, K9K 792, K9K 830, K9K 832, K9K 834, K9K 836, F9Q 650, F9Q 660, F9Q 664, F9Q 670, F9Q 674, F9Q 680, F9Q 690, F9Q 740, F9Q 746, G9T, G9U

SA 6121 CRANKSHAFT LOCKING PIN For OM 6100/OM 3674/OM 3688

8 9 10 11 136

OEM codes: Mot1536, KM6203

OM 9251 TIMING TOOLS RENAULT 1.8-2.0 16V PETROL

Models: Mégane (99-03), Laguna 2 (01-05) Engines: 1.8, 2.0 16V IDE-5FR (courroie) Codes: F5R, 700, 701, 740

TECHNICAL TOOLS ENGINE

OM 3684 TIMING TOOLS RENAULT/NISSAN 1.6 DCI

1 Models: Renault: Mégane, Scénic, Grand Scénic, Latitude, Koleos, Kangoo, Captur Dacia: Sandero, Duster, Dokker, Logan

Nissan: Qashqai, Qashqai+2, Micra, Note Volvo: S 40, V 40 Engines: 1.6 DCI Codes: all R9M

2 3

OM 3627 PULLEY LOCKING TOOL RENAULT

Lets you lock the camshaft when replacing the timing belt Models: Laguna 2, Scénic 2

Engines: 1.8 16v, 2.0 16v Codes: F4P, F4R

6 OM 9211 ADJUSTMENT KIT FOR RAM PUMP SYSTEM (RENAULT F8QT-F9Q)

For 1.9DTI & TD engines

8 OM 3730 EPIC PUMP TIMING PIN DIESEL

EPIC injection pump timing pin Mercedes/Renault/PSA

OM 3621 TORX WRENCH 50 SQUARE 1/2"FOR RENAULT LAGUNA

SA 5325 ROUND TORX WRENCH T50 1/2" D. For OM 3679

9 10 11 137

TECHNICAL TOOLS ENGINE

1 2 3

4 5 6 7

OM 4021 CAMSHAFT PULLEY LOCKING TOOL RENAULT PETROL

Models : Renault: Clio, Clio sport, Megane, ScÃ©nic, Laguna, Espace Nissan : Note, Qashqai Engines : 1.4-1.6 16V, 1.8 16V, 2.0 16V Codes : K4J 712/713/750, K4M 700/701/720/724/748, F4P 760, F4R 700/701/730/740/741/744/780 K4M716/760/761/764/766/782/790/791/792/800/801/ 802/804/812/813. K4J 770/780.

OM 4028 INJECTED WATER PUMP PULLEY LOCKING TOOL This tool allows you to lock the pulley in place when replacing the injection pump. No need to remove the timing belt during this operation. Brands: Renault, Nissan, Opel, Codes: F9Q

OM 3666 TIMING PINS RENAULT/OPEL/NISSAN

Engines: 1.6D, 1.9D, 1.9TD, 1.9TDI, 1.9DCI, 1.5DCI, 1.2, 1.4, 1.6, 1.8, 1.4 16V, 1.6 16V, 1.8 16V Camshaft/Crankshaft timing pins

8 9 10 11 138

OM 3676 TIMING TOOLS RENAULT/OPEL/NISSAN 2.0 DCI

Models: Renault: Megane II, Scenic II, Laguna II, Laguna III, Espace IV, Koleos, Trafic Opel/Vauxhall: Vivaro Nissan: Qashqai, X-Trail, Primastar Engines: 2.0 DCI, 2.0 CDTI Codes: M9R 700, 721, 724 2006-2009, M9R 740, 760 2005-2007, M9R 742, 800, 805 2007-2009, M9R 830, 832, 833 2008-2011, M9R 780 20062009, M9R 784 2006-2011

TECHNICAL TOOLS ENGINE

OM 3692 TIMING TOOLS RENAULT/VOLVO PETROL

Models: Renault: Laguna, Safrane Volvo: 850, C70, S40, V40, S60, S70, S80 Engines: Renault: 2.0 16V, 2.5 20V Volvo: 1.6, 1.8, 1.9, 2.0, 2.3, 2.4, 2.5 Codes: Renault: N7Q 704, 710, 711, N7U 700, 701 Volvo: B4164S, B4164S2, B4184S, B4184S2, B4184S3, B4184S9, B4184S10, B4194T, B4194T2, B4204S, B4204S2, B4204T, B4204T2, B4204T3, B4204T5, B5202FS,

1 2 3

B5204FT, B5204T2, B5204T3, B5204T4, B5204T5, B5234FS, B5234FT, B5234T3, B5234T4, B5234T5, B5234T6, B5234T7,

B5234T8, B5234T9, B5244S, B5244S2, B5244SG, B5244SG2, B5244T, B5244T3, B5244T4, B5244T5, B5244T7, B5252FS,

B5254T, B5254T2, B5254T4

4 5

OM 3754 TIMING BELT FITTING TOOL Lenght: 710mm

This tool is designed to set up ribbed V-belt on pulleys easily. Universal, useful when accesses are restricted.

7 OM 3413 TRIPLE ARM EXTRACTOR Ã&#x2DC;90mm WITH BUTTERFLY LOCKING

8 9 110mm

65mm

10 17mm

11 139

TECHNICAL TOOLS ENGINE

OM 6200 MASTER TIMING TOOL SET PSA 570mm

2 375mm

4 5 6 7 8 9 10 11 140

Models: Fiat/Lancia: Ulysse, Scudo, Ducato, Zeta, Phedra Ford: Fiesta, Fusion, Focus, Focus C-Max CitroÃ«n: C15, C1, C2, C3 Pluriel, C4, C4 Picasso, C5, C6, C8, DS3, DS4, DS5, Xantia, Xsara, Xsara Picasso, Evasion, Berlingo, Jumpy, Jumper, Saxo, ZX, XM, Evasion, AX Peugeot: 107, 1007, 206 cc, 207, 208, 306, 307 cc, 308, 406, 407, 508, 607, 806, 807, Partner, Expert, Boxer, 206, 106, 605, 205, 405 Engines: Fiat/Lancia: 2.0-2.2 JTD Ford: 1.4 -1.6 Duratorq TDCI PSA: 1.0-1.1-1.4-1.6-1.6 16V-1.4 -1.6 HDI-1.8-1.8 16V-2.02.0 turbo-1.9 D-2.0 HDI-2.2 HDI-1.8 16V-2.0 16V Codes: Fiat/Lancia: DW10ATED (RHT/RHV/RHW/RHX/RHZ),

DW12TED4 (4HW) Ford: F6JA, F6JB, F6JC, G8DA, G8DB, HHDA, HHDB, HHJA, HHJB PSA: TU9 (CDY/CDZ), TU1 (HDY/HDZ/HFX/HFY/HFZ), TU3 (KDX/KDY/KDZ/KFX/KFZ), TU5 (BDY/BFZ/NFT/ NFV/NFW/NFY/NFZ), TU5JP4 (NFU/NFX), XU7 (LFW/ LFX/LFZ), XU7JP4 (LGY), XU10 (RFL/RFU/RFW/RFX/RGX/ RGY), XU10JP4(RGX/RGY), EW7J4 (RLZ), EW10A (RFJ), EW10J4S (RFK), EW10D (RLZ), EW12J4 (3FZ), ET3JE (KFU), TU3A/JP (KFV/KFW), DV4TD (8HW/8HX/8HZ), DV4TED4 (8HV/8HY), DV6ATED4 (9HX/9HY/9HZ), EW10-CVI (RLZ), EW12 (3FZ), DW8 (WJZ/WJY), DW10 (RHY/RHV/RHZ/RHS/RHM/RHW/RHT/RHR/RHX), DW12 (4HX/4HZ/4HW/4HY), EW7J4 (6FZ), EW10J4 (RFR), EW10J4D (RLZ)

TECHNICAL TOOLS ENGINE N° 1

OEM CODE 0132-AB 0194-A

REF

DESIGNATION

SA 6211

CRANKSHAFT LOCKING PIN

SA 6212

CRANKSHAFT LOCKING PIN

SA 6213

CRANKSHAFT LOCKING PIN

0194-C 2

21-262 303-734

0194-B 0188-P 174

OEM CODE

REF

4527-TS2

SA 6234

CRANKSHAFT LOCKING PIN

4200-TH

SA 6235

TENSIONER PULLEY LOCKING PIN

0117-AR

SA 6236

TENSIONER PULLEY LOCKING PIN

SA 6237

FLYWHEEL LOCKING PIN

SA 6238

FLYWHEEL LOCKING PIN

SA 6239

SCREW M8

SA 6240

TENSIONING TOOL

SA 6241

FLYWHEEL LOCKING PIN

SA 6242

FLYWHEEL LOCKING TOOL

SA 6243

FLYWHEEL LOCKING TOOL

SA 6244

FLYWHEEL LOCKING PIN

SA 6245

FLYWHEEL LOCKING PIN

SA 6246

FLYWHEEL LOCKING PIN

SA 6247

FLYWHEEL LOCKING PIN

SA 6248

FLYWHEEL LOCKING PIN

0188-P2 5

N°

SA 6215

FLYWHEEL PULLEY PULLER

7015-T 6

0188-J1

SA 6216

TENSIONER PULLEY LOCKING LEVER

0188-J2

SA 6217

TENSIONER PULLEY LOCKING LEVER

0188-Q2

SA 6218

TENSIONER PULLEY LOCKING PIN

0188-AH

SA 6219

TENSIONER PULLEY LOCKING PIN

0153-AK

TIMING BELT RETAINING CLIP

FLYWHEEL LOCKING PIN

9797-34

13 14 15

4507-TB 0153-AB 9041-TZ 0132-AJ2 4533-TAC2

34 35

SA 6222

FLYWHEEL LOCKING PIN

SA 6223

CRANKSHAFT LOCKING PIN

SA 6224 SA 6225

0132-P 4507-TL 7017-TR

0178-D 7014-TM 9767-94

0189-B 21-163 0153-G

0188-M

0189-J

SA 6226

CRANKSHAFT LOCKING PIN

0189-J

4533-TAC1

5711-TA

0153-AB 9041-TZ 7004-TG

SA 6227

CRANKSHAFT LOCKING PIN

SA 6228

CRANKSHAFT LOCKING PIN

0189-A

SA 6229

CRANKSHAFT LOCKING PIN

0188-E

SA 6230

SCREW M8x80mm

SA 6231

CRANKSHAFT LOCKING PIN

0178-B 5711-TB

4 5 6

0132-AJ1

7018-TY

0188-F

0153-G

0132-R 18

0134-Q

0178-C 36

CRANKSHAFT LOCKING PIN CRANKSHAFT LOCKING PIN

0153-M

0132-AJ1

6012-T

9004-T SA 6221

7099-TM 0188-D

4507-TJ

9765-54

0188-Y

7017-TM

0188-Q1

0134-AF

0153-N

0178-E 0132-X

0153-A SA 6220

9767-27

4533-TAD

7014-TJ

4507-TA

9767-89

MOT 1436

0132-QZ

0188-AK 10

7019-T 0132-Q

0132-AK 0189-K

0153-U

DESIGNATION

0188-H

SA 6232

CRANKSHAFT LOCKING PIN

4527-TS1

SA 6233

CRANKSHAFT LOCKING PIN

0189-L

SA 6249

FLYWHEEL LOCKING PIN

0189-C

SA 6250

FLYWHEEL LOCKING PIN

0189-R

SA 6251

FLYWHEEL LOCKING PIN

0606-A1.A2

SA 6252

PULLEY LOCKING LEVER

0189-S1

SA 6253

TENSIONER PULLEY ADJUSTING TOOL

0189-S2

SA 6254

TENSIONER PULLEY LOCKING PIN

7 8 9 10

Timing tool finder with OEM codes p.422

11 141

TECHNICAL TOOLS ENGINE

OM 3727 ROD BUSHINGS ALIGNMENT TOOL PSA 1.4 HDI DV4

OM 4041 TIMING TOOLS PSA 1.0-1.2 3 CYLINDERS NEW

This alignment tool is designed for interventions on PSA DV4 engines : 206+, 207, Bipper, C3, DS3, Nemo... This tool is necessary to center the rod bushings when replacing them, to respond at the manufacturer's recommendations.

4 5 6 7 8 9 10 11 142

OM 4002 TIMING TOOLS PSA/FIAT PETROL-DIESEL

Models: Fiat/Lancia: Ulysse, Scudo, Ducato, Zeta, Phedra Citroën: C1, C2, C3 Pluriel, C4, C4 Picasso, C5, C6, C8, DS3, DS4, Xantia, Xsara, Xsar Picasso, Evasion, Berlingo, Jumpy, Jumper, Saxo, ZX, XM, AX Peugeot: 107, 1007, 206 cc, 207, 208, 306, 307 cc, 308, 406, 407, 607, 806, 807, Partner, Expert, Boxer, 206, 106, 605, 205, 405 Volvo: S40, V50 (2.0, OEM code d4204t2) Ford : Focus, C-Max (engine codes G6DA, G6DB, G6DC)

OM 3777 TIMING TOOLS 1.4-1.6 HDI-TDCI 1.8-2.0 PETROL Timing tool finder with OEM codes p.422

Models: Fiat/Lancia: Scudo, Zeta, Phedra Ford: Fiesta, Fusion, Focus, Focus C-Max Citroën: C1, C2, C3, C3 Pluriel, C4, C4 Picasso, C5, C6, C8, DS3, DS4, Xantia, Xsara, Xsara Picasso, Evasion, Berlingo, Jumpy, Jumper, Saxo, ZX, XM, Evasion, AX Peugeot: 107, 1007, 206 cc, 207, 208, 306, 307 cc, 308, 406, 407, 607, 806, 807, Partner, Expert, Boxer, 206, 106, 605, 205, 405 Engines: Fiat/Lancia: 2.0 16V Ford: 1.4 -1.6 Duratorq TDCI PSA: 1.4 -1.6 HDI, 1.8, 1.8 16V, 2.0, 2.0 turbo, 1.8 16V, 2.0 16V Codes: Fiat/Lancia: EW10 Ford: F6JA, F6JB, F6JC, G8DA, G8DB, HHDA, HHDB, HHJA, HHJB PSA: EW7J4 (RLZ), EW10A (RFJ), EW10J4S (RFK), EW10D (RLZ), EW12J4 (3FZ), ET3JE (KFU), TU3A/JP (KFV/KFW), DV4TD (8HW/8HX/8HZ), DV4TED4 (8HV/8HY), DV6ATED4 (9HX/9HY/9HZ), EW10-CVI (RLZ), EW12 (3FZ), DW8 (WJZ/ WJY), DW10 (RHY/RHV/RHZ/RHS/RHM/RHW/RHT/RHR/RHX), DW12 (4HX/4HZ/4HW/4HY), EW7J4 (6FZ), EW10J4 (RFR), EW10J4D (RLZ)

OM 4070 TIMING TOOLS PSA/LAND ROVER/JAGUAR 2.7 V6 (TDV6)

TECHNICAL TOOLS ENGINE

Models: Citroën: C6, C5 Peugeot: 407, 607, 407 coupé Land Rover: Range Rover Sport, Discovery 3, Discovery 4 Jaguar: S-Type, XJ Series Engines: 2.7 TDV6, 2.7 D, 2.7 HDI Codes: 276DT, 276DT (7B/TG), DT17TED4 (UHZ)

OM 4003 TIMING TOOLS PSA 1.8 16v-2.0 16v PETROL Models: Citroën: C5, Xsara, Xsara Picasso Peugeot: 206, 306, 406 Engines: 1.8 16V, 2.0 16V Codes: EW7J4 (6FZ), EW10J4(RFR), EW10J4D (RLZ), EW10J4 (RFR), EW7J4 (6FZ), EW10J4 (RFR), EW10J4D (RLZ)

4 5

OM 3738 TIMING TOOLS MINI/PSA 1.4-1.6 16V PETROL

Models: Mini: One (R56), Mini Cooper (R55/R56), Mini Cooper S (R55/R56) Citroën: C3, C4, C4 Picasso Peugeot: 207, 308 Engines: 1.4 VTI, 1.6 VTI, 1.6 THP Codes: Mini: N12 B14AB, N12 B16A, N14 B16A Citroën: 8FR (EP3), 5FS (EP6) Peugeot: EP3 (8FS), EP6 (5FW), EP6DT (5FX), 8FS (EP3), EP6DTS (5FY)

OM 3677 DAMPER PULLEY LOCKING TOOL BMW-PSA PETROL

Models: BMW: 1.6, 1.8, 2.0, 2.5, 3.0 Mini Cooper/Cooper S: 1.4-1.6 Citroën: C4/C4 Picasso Peugeot: 207/207 CC, 308 Codes: N40, N42, N45/N45T, N46/N46T, N51, N52/N52K, N53, N54 N12 B14AB, B12 B16A Mini R55/R56

7 8

OM 9281 TIMING TOOLS PSA PETROL-DIESEL Models: Citroën: AX, GTi, ZX, BX, C15, Visa Gti, Saxo 16V 1.6 Peugeot: 106, 205, 305, 309, 405, 309 Gti 16, 405 Mi 16 Engines: 1.0, 1.1, 1.4, 1.6, 1.9 Codes: CDY, CDZ, C1A, HDY, HDZ, H1A, KDX, KDY, KDZ, KFY, KFZ , K1A, K1F, K1G, K2A, K2B, K2D K3A, K6B, M4A, BAY, B1A/A, B1E, B1F, B4A , B6D, B6E, BDY, DDZ, DFZ, DKZ, D2A, D2E, D2C, D2F, D6A, D6D D6E, 159A, 171B, 171C, 171D, 180D, 180Z, NFX, NFU, TU1-2-3-5-9, XU5-171B, 180A, B1E, B6D, XU9-D2A, D6A D6B, X12XE, VJY, VJZ, XU, TU, THX, T9A ,T8A

10 11 143

TECHNICAL TOOLS ENGINE

OM 6400 MASTER TIMING TOOL SET FIAT/ALFA/ LANCIA/OPEL/SUZUKI/FORD

2 3

570mm

5 375mm

6 7 8 9 10 11 144

Models: Alfa: 145, 146, 147, 155,156, Spider, GTV, TS, GT, 159, 166, Crosswagon Q4 Fiat: Punto, Grande Punto, Brava/Bravo, Marea, Weekend, Stilo, Doblo/Cargo, Idea, Panda, Multipla, Palio, Stilo, 500 Lancia: Lybra, Ypsilon, Thesys,Musa, Opel: Corsa, Agila, Meriva, Combo, Vectra, Zafira, Astra, Insigna, Signum 1.9 CDTi Suzuki: Ignis, Swift, Wagon R+ Ford: Ka Engines: 1.2 8V, 1.2 16V, 1.4 16V, 1.6 16V, 1.6 MultiJet, 1.9 JTD, 1.9 JTD 16V, 1.9 MultiJet, 2.4 JTD, 1.9 CDTI, 2.0 MultiJet, 2.4 JTD 20V, 1.3 JTD MultiJet, 1.3 CDTI, 1.3 TDCI, 1.9 CDTI Codes: 176B9.000,182B2.000,188A5.000,84 3A1.000,323.02,371.01, 182B4.000, 182B9.000,

186A6.000, 188A2.000, 188A7.000, 188B2.000, 192A1.000, 192A3.000, 937A2.000, 939A1.000, 192A5.000, 192B1.000, 198A5.000, 937A5.000, 939A2.000, 325.01, 342.02,362.02,185A6.000, 841C.000, 841G.000, 939A3.000, 940A3.000, 940A4.000, 940A5.000, Z19DT/DTH/DTR/DTJ/ DTL,169A1.000, 955A4.000, 350A3.000, 192B4.000, 198A2.000, 350A2.000, 955A3.000, 192A8.000, 198A6.000, 198A3.000, 199B1.000, 199B2.000, 199A2.000, 199A3.000, 199A9.000, 188A3.000, 188A8.000, 188A9.000, 192A9.000, 186A8.000, 186A9.000, 199A5.000, 223A7.000, 223A9.000, 841H.000, 841P.000, 185A2.000, Z13DT, Z13DTJ, Z13DTH,182A4.000, 182A6.000, 182B6.000, 178B3.000, 186A3.000, 186A4.000, 350A1.000, 169A4.000, 188A4.000 ,199A4.000, 199A7.000 Timing tool finder with OEM codes p.422

TECHNICAL TOOLS ENGINE NÂ°

OEM CODE

REF

DESIGNATION

SA 6401

SCREW M8

1860965000

SA 6402

INJECTION PUMP LOCKING PIN

1860161000

SA 6403

FLYWHEEL LOCKING TOOL

1860876000

SA 6404

TENSIONING TOOL

1860874000

SA 6405

CAMSHAFT LOCKING TOOL

1860874000

SA 6406

CAMSHAFT LOCKING TOOL

1860905000 EN-46788

SA 6407

CRANKSHAFT TIMING TOOL

1860985000

SA 6409

CAMSHAFT LOCKING PIN

1860992000

SA 6410

TDC INDICATOR

1860987000

SA 6411

TENSIONING TOOL

1895443000

SA 6412

TDC INDICATOR

1860845000

SA 6413

TENSIONING TOOL

1860771000

SA 6414

FLYWHEEL LOCKING TOOL

1860898000

SA 6415

FLYWHEEL LOCKING TOOL

1860863000

SA 6416

FLYWHEEL LOCKING PIN

1825041000

SA 6417

CAMSHAFT LOCKING TOOL

1825041000

SA 6418

CAMSHAFT LOCKING TOOL

1825042000

SA 6419

CAMSHAFT LOCKING TOOL

1825042000

SA 6420

CAMSHAFT LOCKING TOOL

1860847000

SA 6421

CAMSHAFT LOCKING TOOL

1860847000

SA 6422

CAMSHAFT LOCKING TOOL

SA 6423

SCREW M7x45mm

SA 6424

SCREW M8x20mm

1870900300

SA 6425

CRANKSHAFT TIMING TOOL

1860703000

SA 6426

FLYWHEEL LOCKING TOOL

1870900400

SA 6427

TIMING CHAIN TENSIONING TOOL

1871000900

SA 6428

CAMSHAFT LOCKING TOOL

1860933000

SA 6429

LOCKING PIN

2190754500

SA 6430

CRANKSHAFT TIMING TOOL

2000004300

SA 6431

CAMSHAFT LOCKING TOOL

2000004400 2190754400

SA 6432

CAMSHAFT LOCKING TOOL

2000004200 2190754200

SA 6433

FLYWHEEL LOCKING TOOL

SA 6434

SCREW M10x150mm

SA 6435

SCREW M8x125mm

SA 6436

SCREW M6x100mm

SA 6437

SCREW M6x100mm

SA 6438

SCREW M6x100mm

1870896900

SA 6441

CAMSHAFT LOCKING PIN

1860905000

SA 6442

CRANKSHAFT TIMING TOOL

1860876000

SA 6443

TENSIONING TOOL

2000004500 2190754500

SA 6444

CRANKSHAFT LOCKING TOOL

1 2 3

4 5 6 7 8 9 10 11 145

TECHNICAL TOOLS ENGINE

1 2 3

OM 4036 TIMING TOOLS FIAT/ALFA/LANCIA/OPEL Models: Alfa: 145, 146, 147, 156, 166, GT Fiat: Punto, Grande Punto, Brava/Bravo Marea, Weekend, Stilo, Doblo/Cargo, Multipla Lancia: Lybra, Thesys Opel: Vectra, Zafira, Astra, Insigna, Signum Engines: 1.6 MultiJet, 1.9 JTD, 1.9 MultiJet, 2.4 JTD, 1.9 CDTI, 2.0 MultiJet

4 5 6 7

Codes: 3323.02,371.01, 182B4.000, 182B9.000, 186A6.000, 188A2.000, 188A7.000, 188B2.000,186A8000 ,192A1.000, 192A3.000, 937A2.000, 939A1.000, 192A5.000, 192B1.000, 198A5.000, 937A5.000, 939A2.000, 325.01, 342.02,362.02,185A6.000, 841C.000, 841G.000, 939A3.000, 940A3.000, 940A4.000, 940A5.000, Z19DT/DTH/DTR/DTJ/DTL

OM 4012 TIMING TOOLS MULTIJET

Models: Alfa: 145, 146, 147, 156, 159, 166, GT, Crosswagon Q4 Fiat: Punto, Grande Punto, Bravo/ Brava, Marea, Weekend, Stilo, DoblÃ²/ Cargo, Multipla, Idea, Panda Lancia: Ypsilon, Musa, Lybra, Thesys Opel: Corsa, Agila, Meriva, Combo Tour, Astra, Zafira, Vectra Suzuki: Ignis, Swift, Wagon R+ Ford: Ka Engines: 1.3 JTD MultiJet, 1.3 CDTI, 1.3 TDCI, 1.6 MultiJet, 1.9 JTD, 1.9 MultiJet, 2.4 JTD, 1.9 CDTI, 2.0 MultiJet Codes: 169A1.000, 955A4.000, 350A3.000, 192B4.000, 198A2.000, 350A2.000, 955A3.000, 192A8.000, 198A6.000, 198A3.000, 199B1.000, 199B2.000, 199A2.000, 199A3.000, 199A9.000, 940A3.000, 188A3.000, 939A2.000, 188B2.000,

188A8.000, 188A9.000, 323.02, 371.01, 937A2.000, 182B4.000, 182B9.000, 188A2.000, 188A7.000, 192A9.000, 186A6.000, 186A8.000, 192A1.000, 192A3.000, 192B1.000, 192A5.000,

186A9.000, 939A1.000, 199A5.000, 223A7.000, 223A9.000, 342.02, 362.02, 841G.000, 841H.000, 841P.000, 939A3.000, 185A2.000, 185A6.000, Z13DT, Z13DTJ, Z13DTH, Z19DT, Z19DTH, Z19DTJ, Z19DTL

OM 3675 TIMING TOOLS FIAT 1.9-2.4-2.8 TD-JTD

OM 4025 TIMING TOOLS FIAT 2.3 JTD

Codes: 182 A07.000, 182 A8.000, 182 B4.000, 183 A6.000, 185

Models: Ducato, Iveco, Daily Engines: 2.3 JTD, 3.0 JTD, 3.0 HPI Codes: F1AE0481C, F1CE0481D, F1AE0481A, F1AE0481B, F1CE0481A

10 11 146

A6.000, 188 A2.000, 192 A1.000, 8140.43, 8140.63, D8B, D9B, DHX, DJY

TECHNICAL TOOLS ENGINE

OM 4015 TIMING TOOLS FIAT 1.2-1.4 16V PETROL

Models: Punto, Bravo, Brava, Marea, Palio Weekend, Stilo Engines: 1.2 16V, 1.4 16V Codes: 176B9.000, 182B2.000, 188A5.000, 843A1.000

OM 4039 TIMING TOOLS FIAT/ALFA 1.4 MultiAir PETROL

OM 3689 TIMING TOOLS ALFA PETROL Models: 145, 146, 147, 155, 156, Spider, GTV TS Engines: 1.4, 1.6, 1.6 16V, 1.6 16V avec poulie déphasage, 1.8, 2.0, 2.0 16V Codes: 162.01, 321.02,

Models: Alfa Romeo: Mito, Giulietta Fiat: Punto Evo, 500 Engines: 1.4 Multiair 105, 1.4 Multiair 135 Turbo, 1.4 Multiair 170 Turbo

321.03, 321.04, 322.01, 323.01, 323.10, 335.03 341.03, 671.06, 672.04, 676.01, 192a4000, 182b3000

Models: Fiat: Idea, Punto, Grande Punto, Stilo, Panda, 500, Bravo, New Punto, Punto Evo, New Panda Lancia: Ypsilon, Musa Ford: Ka Engines: 1.2 8V, 1.2 16V, 1.4 8V, 1.4 Bi-Fuel LPG, 1.4 Natural Power CNG, 1.2 Easy Power LPG, 1.2 BiFuel LPG, 1.2 Evo Codes: 350A1.000, 169A4.000, 188A4.000, 199A4.000, 199A7.000

OM 4038 TIMING TOOLS FIAT 1.6 16V

Models: Bravo, Brava, Doblò, Doblò Cargo, Marea, Marea Weekend, Palio Weekend, Multipla, Siena, Delta, Lybra Engines: 1.6 16V, 1.6 16V Bipower, 1.6 16V Blupower Codes: 182A4.000, 182A6.000, 182B6.000, 178B3.000, 186A3.000, 186A4.000

4 5

Codes: 955A6.000, 955A2.000, 955A7.000, 940A2.000, 955A8.000, 312 A 1000

OM 4017 TIMING TOOLS FIAT/LANCIA/FORDPETROL

6 AC 0514 COMPARATOR 0-10mm

7 8 9 10 11 147

TECHNICAL TOOLS ENGINE

OM 6500 MASTER TIMING TOOL SET OPEL/CHEVROLET/ SAAB/FIAT/LANCIA/SUZUKI/FORD

2 3 570mm

4 5 375mm

6 7 8 9 10 11 148

Models: Opel: Corsa B,C, Combo, Tigra, Agila,Tigra B, Meriva, Astra F,G , H, Astravan ,Speedster/VX220, Zafira A , B, Vectra B , C, Signum, Omega B, Sintra, Frontera A , B , Astravan, Kadett, Ascona, Omega, Monterey, Antara ,Croma ,Speedster/VX220 Chevrolet/Daewoo: Epica, Captiva, Nubira, Lacetti, Evanda Saab: 9-3, 9-5 (98-04) Alfa: 145, 146, 147, 156, 159, 166, GT, Crosswagon Q4 Fiat: Punto, Grande Punto, Bravo/Brava, Marea, Weekend, Stilo, DoblÃ²/Cargo, Multipla, Idea, Panda Lancia: Ypsilon, Musa, Lybra, Thesys Suzuki: Ignis, Swift, Wagon R+ Ford: Ka Engines: 1.0 12V, 1.0 16V, 1.2 16V, 1.4 ,1.6, 1.2-1.4 16V (Chain), 2.0, 2.0 Turbo, 2.2 DI, 2.0-2.2 16V, 1.6 16V, 1.8 16V, 2.0 16V, 2.2 16V, 1.3 JTD MultiJet, 1.3 CDTI, 1.3 TDCI, 1.6 MultiJet, 1.9 JTD, 1.9 MultiJet, 2.4 JTD, 1.9 CDTI, 2.0 MultiJet,1.5 D, 1.5 TD, 1.7 D, 1.7 TD, 1.6-1.7 D, 3.0 TD, 3.1 TD, 2.0-2.2-2.4 TD, 2.0-2.2 DI, 2.0 TDCI, 2.0 D VCDI, 2.2 16V (double camshaft) Codes: X14XE, Z14XE, X16SEJ, X16XE, X16XEL, Y16XE, Z16XE, Z16YNG, C18XEL, X18XE, X18XE1, Z18XE, Z18XEL,

C20SEL, C20XE, X20XEV, Z20LEH, Z20LEL, Z20LER, Z20LET, X22SE, X22XE, Y22SE, Y22XE, Z22XE, D223L,X10XE, Z10XE, Z10XEP, X12XE, Z12XE, Z14XEP, X20DTL, X20DTH, X22DTH, Y20DTL, Y20DTH, Y22DTH, Y22DTR,169A1.000, 955A4.000, 350A3.000, 192B4.000, 198A2.000, 350A2.000, 955A3.000, 192A8.000, 198A6.000, 198A3.000, 199B1.000, 199B2.000, 199A2.000, 199A3.000, 199A9.000, 940A3.000, 188A3.000, 939A2.000, 188B2.000, 188A8.000, 188A9.000, 323.02, 371.01, 937A2.000, 182B4.000, 182B9.000, 188A2.000, 188A7.000, 192A9.000, 186A6.000, 186A8.000, 192A1.000, 192A3.000, 192B1.000, 192A5.000, 186A9.000, 939A1.000, 199A5.000, 223A7.000, 223A9.000, 342.02, 362.02, 841G.000, 841H.000, 841P.000, 939A3.000, 185A2.000, 185A6.000, Z13DT, Z13DTJ, Z13DTH, Z19DT, Z19DTH, Z19DTJ, Z19DTL,X10XE, Z10XE, Z10XEP, Z12XE, Z14XEP, X16SZR, Z16SE,4EC1/T, 4EC1, 4EE1/T, 4EE1, X17DT, Y17DT, Y17DTi, Y17DTL, 16DA, 17D, 17DR/X, 7DTL, X17DTL, 4JX1/4, JG2T,4FC1/T, 4FD1, X20DTL, Y20DTL, D223L Z20DMH, Z20DM, RA420, Z20S1,194A1.000, Z22SE, Z22YH

TECHNICAL TOOLS ENGINE NÂ°

OEM CODE

REF

DESIGNATION

KM-852

SA 6501

CAMSHAFT LOCKING TOOL

KM-853

SA 6502

CAMSHAFT LOCKING TOOL

KM-933

SA 6503

TIMING ADJUSTMENT WRENCH

KM-933

SA 6504

TIMING ADJUSTMENT WRENCH

KM-927

SA 6505

INJECTION PUMP LOCKING PIN

KM-929

SA 6506

CRANKSHAFT LOCKING PIN

KM-932

SA 6507

CAMSHAFT LOCKING TOOL

21-162B 303-376 303-376B

SA 6508

CAMSHAFT LOCKING PLATE

KM-952

SA 6509

CRANKSHAFT LOCKING PIN

KM-954

SA 6510

CAMSHAFT LOCKING TOOL

KM-955

SA 6511

TENSIONER RETAINING PIN

KM-6148

SA 6512

CAMSHAFT LOCKING TOOL

EN-46785 KM-951

SA 6513

CRANKSHAFT LOCKING PIN

1860985000 1871000900 EN-46781

SA 6514

CAMSHAFT LOCKING PIN

KM-J-43651

SA 6515

PULLEY SUPPORT

1860905000 1860905010 EN-46788

SA 6516

CRANKSHAFT LOCKING TOOL

1870896900 EN-46789

SA 6517

CAMSHAFT LOCKING PIN

1860905000 1860905010 EN-46788

SA 6518

CRANKSHAFT LOCKING TOOL

KM-6130 KM-6349 KM-6349

SA 6519

TENSIONER LOCKING PIN

KM-911

SA 6520

FLYWHEEL LOCKING TOOL

SA 6521

SCREW M6x30mm

SA 6522

SCREW M8x20mm

1870900300 303-1468

SA 6523

CRANKSHAFT LOCKING TOOL

1860703000

SA 6524

FLYWHEEL LOCKING TOOL

1870900400 1871000200

SA 6525

TENSIONING TOOL

1860985000 1871000900 EN-46781

SA 6526

CAMSHAFT LOCKING PIN

EN-46785

SA 6527

CRANKSHAFT LOCKING TOOL

EN-48245

SA 6528

CAMSHAFT LOCKING TOOL

EN-48246

SA 6529

CRANKSHAFT LOCKING PIN

Timing tool finder with OEM codes p.422

1 2 3

4 5 6 7 8 9 10 11 149

TECHNICAL TOOLS ENGINE

1 2 3

4 5 6 7 8

OM 3669 TIMING TOOLS OPEL/SAAB PETROL-DIESEL

Models: Opel: Corsa, Agila, Meriva, Vauxhall, Astra, Astravan, Zafira, Vectra, Omega, Sintra, Frontera, Signum Saab: 9-3, 9-5 (98-04) Engines: Opel: 1.0 12V, 1.0 16V, 1.2 16V, 1.4 16V (Chaine), 2.0, 2.2 DI Saab: 2.2 Di engine D223L Codes: X10XE, Z10XE, Z10XEP, X12XE, Z12XE, Z14XEP, X20DTL, X20DTH, X22DTH, Y20DTL, Y20DTH, Y22DTH, Y22DTR

OM 4122 TIMING TOOLS OPEL/SAAB 2.0 TDI-DTL-DTH-DTX Models: Opel: Vauxhall, Astra, Astravan, Zafira, Vectra, Omega, Sintra, Frontera, Signum Saab: 9-3, 9-5 (98-04) Engines: Opel: 2.0, 2.2 DTi

Saab: 2.2 DTi Codes: Opel: X20DTL, X20DTH, X22DTH, Y20DTL, Y20DTH, Y22DTH, Y22DTR Saab: D223L

OM 4123 TIMING TOOLS FOR OPEL PETROL Models: Corsa B/C, Combo, Tigra, Tigra B, Meriva, Astra F, G, H, Speedster/ VX220, Zafira A/B, Vectra B/C, Signum, Omega B, Sintra, Frontera A/B Engines: 1.4 16V, 1.6 16V, 1.8 16V, 2.0 16V, 2.2 16V Codes: X14XE, Z14XE, X16SEJ, X16XE, X16XEL, Y16XE, Z16XE, Z16YNG, C18XEL, X18XE, X18XE1, Z18XE, Z18XEL, C20SEL, C20XE, X20XEV, Z20LEH, Z20LEL, Z20LER, Z20LET, X22SE, X22XE, Y22SE, Y22XE, Z22XE

OM 4126 TIMING TOOLS OPEL/FIAT/ALFA PETROL

OM 4026 TIMING TOOLS OPEL/CHEVROLET 2.0 CDTI

9 10 11 150

Models: Opel: Corsa-D, Agila, AstraG-H, Meriva, Zafira-B, Vectra-C, Signum, Insigna Fiat: Croma Alfa Romeo: 159 Engines: 1.6 16V, 1.8 16V

Codes: Opel: A 16 XER/LDE, Z 16 XEP, Z 16 XER, Z 16 XE1, Z 16 LET, Z 16 LER, Z 16 LEL, Z 18 XER, A 18 XER/2H0 Fiat/Alfa Romeo: 939A4.000

Models: Opel: Antara Chevrolet/Daewoo: Epica, Captiva, Nubira, Lacetti, Evanda Engines: 2.0 TDCI, 2.0 D VCDI Codes: Z20DMH, Z20DM, RA420, Z20S1

TECHNICAL TOOLS ENGINE

OM 3674 TIMING TOOLS RENAULT/OPEL/NISSAN/SUZUKI DCI Models:

Renault: Clio, Kangoo, Laguna, Espace, Master, Mégane/Scénic, Trafic Nissan: Kubistar, Interstar, Qashqai

Opel: Vivaro, Movano Suzuki: Gran Vitara Engines: 1.5 DCI, 1.9 TD, 1.9

DCI, 2.2 DCI, 2.5 DCI Codes: K9K 700, K9K 702, K9K

704, K9K 706, K9K 710, K9K 712, K9K 714, K9K 716, K9K 718, K9K 722, K9K 724, K9K 728, K9K 729, K9K 732, K9K 734, K9K 750, K9K 752, K9K 760, K9K 762, K9K 764, K9K 766, K9K 768, K9K 790, K9K 792, K9K 830, K9K 832, K9K 834, K9K 836, F9Q 650, F9Q 660, F9Q 664, F9Q 670, F9Q 674, F9Q 680, F9Q 690, F9Q 740, F9Q 746, G9T, G9U

OM 3676 TIMING TOOLS RENAULT/OPEL/NISSAN 2.0 DCI Models: Renault: Megane II, Scenic II, Laguna II, Laguna III, Espace IV, Koleos, Trafic Opel/Vauxhall: Vivaro Nissan: Qashqai, X-Trail, Primastar Engines: 2.0 DCI, 2.0 CDTI Codes: M9R 700, 721, 724 2006-

Timing tool finder with OEM codes p.422

OM 3666 TIMING PINS RENAULT/OPEL/NISSAN Engines: 1.6D, 1.9D, 1.9TD, 1.9TDI, 1.9DCI, 1.5DCI, 1.2, 1.4, 1.6, 1.8, 1.4 16V, 1.6 16V, 1.8 16V

OM 4012 TIMING TOOLS MULTIJET Models: Alfa: 145, 146, 147, 156, 159, 166, GT, Crosswagon Q4 Fiat: Punto, Grande Punto, Bravo/ Brava, Marea, Weekend, Stilo, Doblò/Cargo, Multipla, Idea, Panda Lancia: Ypsilon, Musa, Lybra, Thesys Opel: Corsa, Agila, Meriva, Combo Tour, Astra, Zafira, Vectra Suzuki: Ignis, Swift, Wagon R+ Ford: Ka Engines: 1.3 JTD MultiJet, 1.3 CDTI, 1.3 TDCI, 1.6 MultiJet, 1.9 JTD, 1.9 MultiJet, 2.4 JTD, 1.9 CDTI, 2.0 MultiJet Codes: 169A1.000, 955A4.000, 350A3.000, 192B4.000, 198A2.000, 350A2.000, 955A3.000, 192A8.000, 198A6.000, 198A3.000,

Camshaft/Crankshaft timing pins

2009, M9R 740, 760 2005-2007, M9R 742, 800, 805 2007-2009, M9R 830, 832, 833 2008-2011, M9R 780 2006-2009, M9R 784 2006-2011

4 5 6 7 8

199B1.000, 199B2.000, 199A2.000, 199A3.000, 199A9.000, 940A3.000, 188A3.000, 939A2.000, 188B2.000, 188A8.000, 188A9.000, 323.02, 371.01, 937A2.000, 182B4.000, 182B9.000, 188A2.000, 188A7.000, 192A9.000, 186A6.000, 186A8.000, 192A1.000, 192A3.000, 192B1.000, 192A5.000, 186A9.000, 939A1.000, 199A5.000, 223A7.000, 223A9.000, 342.02, 362.02, 841G.000, 841H.000, 841P.000, 939A3.000, 185A2.000, 185A6.000, Z13DT, Z13DTJ, Z13DTH, Z19DT, Z19DTH, Z19DTJ, Z19DTL

9 10 11 151

TECHNICAL TOOLS ENGINE

OM 6300 MASTER TIMING TOOL SET VAG

2 3

570mm

5 375mm

6 7 8 9 10 11 152

Models: Audi: 80, A1, A2, A3, A3 cabrio, S3, A4, A5, A6, TT, Q5 Seat: Arosa, Ibiza, Cordoba, Leon, Toledo, Alhambra, Altea, Inca (99-04) Skoda: Fabia, Octavia, Superb VW: Lupo, Polo, Fox, Golf, Bora, Jetta, Golf Plus, Golf estate, Passat, Beetle, Touran, Sharan, Caddy, Caddy Maxi, Transporter, Golf VI cabrio, Tiguan Ford: Galaxy Engines: Petrol : 1,2 TSI, 1.4, 1.4 TSI, 1.6 16V, 1.2 9V-12V 3cylindres, 1.4 ,1.6 FSi (chaine), 1.8, 1.8 16V, 1.8T, 2.0 16V, 2.0 FSI/TFSI (courroie) DieselÂ : 1.2 TDI PD, 1.4 TDI PD, 1.9 TDI 75-90-110 PF, 1.9 SDI 75-90-110 PF, 1.9 TDI 105-130-150 PF, 2.0 TDI PD, 2.0 TDI DPF 140-170 PF, 2.5 TDI V6 Codes: ARC, ATN, AUS, AVY, AZD, AFH, BCA, AJV, AKQ, AUA, AUB, AXP, AFH, AFN, AFK, AHW, AHU, APE, AQQ, AUS, AXP, AZD, BBY, BBZ, BCB, ANY, AYZ, AMF, ATL, BAY, BHC, BMS, BNM, BNV, BWB, AJM, AMG, ANU, ARL, ASZ, ATD, ATJ, AUY, AVB, AVF, AVQ, AWX, AXB, AXC, AXR, BEW, BJB, BKC, BKE, BLS, BLT, BMT, BPX, BRB, BRM, BRR, BRS, BRU, BSU, BSW, BTB, BUK, BVK, BXE, BXF, AZV, BDJ, BDK,BGW, BHW, BKD, BKP, BLB, BMA, BMM, BMN, BMP, BMR, BNA, BPW, BRC, BRE, BRF, BRT, BUZ, BE, BVF,BVG,BVH,BWK,BTS,BMY,BLF, BWV, AZV, BKD, AWY, AZQ (55 - 64 PF), AXU, BAG, BKG, BLF, BLN, BLP, BFV, BKF, BNU, BVP, BVR, 1Z,CBZA, CBZC,CBZB,CAXA, CAGA, CAGB, CAGC, CAHA, CAYA, CAYB. CAYC, CBAA, CBAB, CBAC, CBBA, CBBB, CBDA, CBDB, CBDC, CBEA, CEGA. AZV, BDJ, BHP, BKD, BLB, BMA, BMM BMN, BMP, BMR, BNA, BPW, BRC, BRE, BRF, BRT, BSS, BUY, BUZ, BVA, BVE, BVF, BVG, BVH, BWV, ACV, ACV, AFB, AGX, AHD, AHY, AHY, AJT, AJT, AKE, ANJ, APA, AUF, AXG, AXG, AXL, AXL, AYC, AYC, AYM, AYY, BAU, BBE, BBF, BCZ, BDG, BDH, BFC, BJJ, BJK, BJL, BJM

TECHNICAL TOOLS ENGINE

N° 1

OEM CODE 3369 T30092

REF

DESIGNATION

SA 6311

SUPPORT GUIDES X2

SA 6312

CRANKSHAFT LOCKING PIN 2,5TDI

N°

OEM CODE

REF

T10123

SA 6326

CAMSHAFT LOCKING PIN x2

T10121

SA 6327

CRANKSHAFT LOCKING PIN

3242 2

T40069 T30052

3458 T30094

T00115 18

MP1-301

SA 6313

CAMSHAFT ALIGNMENT PLATES 2,5TDI

3366 19

SA 6314

INJECTION PUMP LOCKING PIN

3359 MP1-301

SA 6315

INJECTION PUMP LOCKING PIN

SA 6316

TENSIONER LOCKING TOOL

T10074

T 40026

SA 6331

CRANKSHAFT LOCKING PIN

23-059 23-059 310-085

SA 6318

T10050

CRANKSHAFT SPROCKET ALIGNMENT

MP1-1312 T10098

SA 6319

CAMSHAFT ALIGNMENT / LOCKING TOOL

T20038 2065A 10

T10008

SA 6320

TENSIONER LOCKING TOOL

U40021 11

T10092

SA 6321

CHAIN TENSIONER RETAINER

T40011

SA 6322

CAM BELT TENSIONER LOCKING PIN

MP1-1312 13

T10098 T20038

SA 6323

LOCKING BRACKET

T20038 14 15

2064 U20003 3418

TOOL

T10050 9

T10060A

SA 6332

SA 6324

INJECTION PUMP LOCKING PIN

SA 6325

CAMSHAFT LOCKING PLATE

T10264

SA 6333

T40098

CAMSHAFT ALIGNMENT / LOCKING TOOL

T10074

T10060

2065-A 21-105 303-1054 T10115 3387 U30009A 2587 MATRA V.159 3387 T10020

1 2

HOLDING TOOL CAMSHAFT LOCKING PIN

24 SA 6317

CHAIN TENSIONER / CRANKSHAFT PULLEY

SA 6330

T10008 T10016

LOCKING PIN

T10120

T00115

23-058 310-084

SA 6329

AUXILIARY DRIVE BELT TENSIONER

T20102 6

T20018 T20044

T20102 5

SA 6328

T40098

3359 4

T10264

DESIGNATION

AUXILIARY DRIVE BELT TENSIONER LOCKING PIN AUXILIARY DRIVE BELT TENSIONER LOCKING PIN

SA 6334

CAMSHAFT LOCKING PLATE

SA 6335

TENSIONER PULLEY LOCKING PIN

SA 6336

TENSIONER LEVER

SA 6337

TENSIONER LEVER

SA 6338

TENSIONER LEVER

3411

SA 6339

SUPPORT GUIDES X2 M8

T10252

SA 6340

CAMSHAFT LOCKING TOOL

T10092

SA 6341

CHAIN TENSION TOOL

T10170

SA 6342

TDC INDICATOR

T40011

SA 6343

CAM BELT TENSIONER LOCKING PIN

T10341

SA 6344

CRANKSHAFT LOCKING PIN

T10171

SA 6345

CAMSHAFT LOCKING PLATE

T10340

SA 6346

CRANKSHAFT LOCKING PIN

VAS6079

SA 6347

DIAL TEST INDICATOR

T10414

SA 6348

CRANKSHAFT LOCKING PIN

T10100

SA 6349

CRANKSHAFT LOCKING TOOL

4 5 6 7 8 9

Timing tool finder with OEM codes p.422

10 11 153

TECHNICAL TOOLS ENGINE

OM 4018 TIMING TOOLS VW/AUDI/SEAT/SKODA PETROL-DIESEL

2 3

4 5 6 7 8

Models: Audi: 80, A2, A3, A3 Cabrio, A4, A4 quattro, A5, A5 Coupe/Cabriolet, A6, A6 quattro, TT, Q5 Seat: Ibiza, Altea, Altea XL, Arosa, Ibiza/Cordoba, Inca, Leon, Toledo, Alhambra Skoda: Exeo, Fabia, Fabia II, Felicia, Roomster, Octavia, Octavia Tour, Octavia II, Superb, Superb II VW: Lupo, Polo, Polo/Classic, Fox, Golf/Bora, Golf/Plus, Jetta, Jetta III, Eos, Beetle, New Beetle, Scirocco, Tiguan, Passat, Passat CC, Touran, Sharan, Caddy, Vento, Caddy Maxi, Golf Estate, Sharan, Transporter Engines: 1.2 TDI PD, 1.4 TDI PD, 1.7 SDI, 1.9 D/Turbo, 1.9 SDI, 1.9 TDI, 1.9 TDI PD, 2.0 TDI PD, 2, 5 TDI Codes: AJM, AMF, ANU, ANY, ARL, ASZ, ATD, ATJ, ATL, AUY, AVB, AVF, AVQ, AWX, AXB, AXC, AXR, AYZ, BAY, BDK, BGW, BHC, BHW, BJB, BKC, BKD, BKE, BKP, BLS, BLT, BMR, BMS, BMT, BNM,BNV, BPX, BRB, BRM, BRR, BRS, BRU, BSU, BSV, BSW, BTB, BUK, BVK, BWB, BWV, BXE, BXF, BDJ, BLB, BMM,BMN, BMP, BMR, BNA, BPW, BRC, BRE, BRF, BRT, BSS, BVH, BWV, AHB, AHG, AKU, AKW, 1X, 1Y, AAZ, ABL, AEF, AEY, AGD, AGP, AQM, ASX, ASY, AYQ, 1Z, AFF, AFN, AGR, AHF, AHH, AHU, ALE, ALH, ASV, AVG, AFB

OM 4032 TIMING TOOLS VAG DIESEL

9 10 11 154

Models : Audi: A4, A5, A6, A8, Q5, Q7 VW: Touareg, Phaeton Engines: 2.7-3.0-4.0-4.2 TDI CR Codes: BPP, BSG, CANA/B/C/D, ASB, BKN, CAPA, BNG, BMZ, BUG, ASE, BMK, CARA, BKS, BUN, CASA/B/C, CAMA/B, CGKA/B, CCWB/A, CCLA, CDYA/B/C, CEXA, BVN, BTR, CCFA

OM 4511 TIMING TOOLS VAG 2.5 TDI V6

Models: Audi: 80, A4, A6, A8, S6, S4, Allroad VW: Passat, Golf Cabriolet Engines: Audi: 2.6, 2.8 1991-02, 2.5 V6 TDI 1997-04, 1.9 TDEI PD 2002-04, 1.9 TDI PD 199701, 1.9 TDI 1997-01, 3.0 V6 2001-04, 2.8 30V 1995-02, 2.4 1997-04, 2.8 1997-04, 1.8 Turbo 2001-04, 2.0 2001-04, 1.8 1997-01, 1.6 1994-04,2.6/2.8 1992-02, 4.2 V8 1999-04, 2.5 V6 TDI 1997-04, 1.9 TDI PD 2002-04, 1.9 TDI 1994-03, 3.0 V6 2001-04, 2.4-2.8 1997-04, 2.0 2001-04, 1.8 Turbo 1999-04, 2.6-2.8 1991-02, 2.5 V6 TDI 199704, 2.8 30V 1995-02, 2.8 1997-04, 2.8 1991-02, 4.2 V8 1999-04, 2.7 Turbo 1997-04, 2.5 V6 TDI 1997-04 VW: 1.6 1996-04, 1.8 1996-00, 1.8 Turbo 1996-00, 2.8 30V 1996-04, 1.9 TDI 1997-00 1.9 TDI PD 1998-02, 2.5 V6 TDI 1998-04, 2.0 1996-04

OM 9260 TIMING TOOLS VAG/FORD DIESEL

Models: From 2007 (square-tooth pulleys) Audi: A2, A3, A3 Cabrio, A4, A4 4WD, A5 Coupe/Cabriolet, A6, A6 quattro, Q5, TT Seat: Alhambra, Altea, Altea XL, Arosa, Cordoba, Ibiza, Leon, Toledo Skoda: Exeo, Fabia, Fabia II, Octavia, Octavia Tour, Octavia II, Roomster, Superb, Superb II VW: Beetle, Bora, Caddy, Caddy Maxi, Eos, Fox, Golf, Golf Plus, Golf Estate, Jetta, Jetta III, Lupo, Passat, Passat CC, Polo, Scirocco, Sharan, Tiguan, Touran, Transporter Ford: Galaxy Engines: 1.2 TDI PD, 1.4 TDI PD, 1.6 TDI CR, 1.9 TDI PD, 2.0 TDI PD, 2.0 TDI CR Codes: AJM, AMF, ANU, ANY, ARL, ASZ, ATD, ATJ, ATL, AUY, AVB, AVF, AVQ, AWX, AXB, AXC, AXR, AYZ, AZV, AHU, AFN, ANU, AUY, BAY, BDK, BGW, BHC, BHP, BHW, BJB, BKC, BKD, BKE, BKP, BLS, BLT, BMA, BMN, BMR, BMS, BMT, BNM, BNV, BRE, BRF, BPX, BRB, BRM, BRR, BRS, BRU, BSU, BSV, BSW, BTB, BUK, BUY, BUZ, BVA, BVE, BVF, BVG, BVK, BWB, BWV, BXE, BXF, CAGA, CAGB, CAGC, CAHA, CAYA, CAYB, CAYC, CBAA, CBAB, CBAC, CBBA, CBBB, CBDA,CBDB, CBDC, CBEA, CEGA, BLB, BNA

OM 4037 TIMING TOOLS VAG 1.2-1.6-2.0 TDI

Models: Skoda: Roomster, Fabia, Praktik, Octavia, Yeti, Superb Audi: A1, A3, A4, A5, Q5, A6, TT VW: Jetta, Touran, Golf, Golf plus, Polo, Passat, Tiguan, Scirocco Seat: Exeo, Leon, Altea, Toledo, Ibiza Engines: 1.2 TDI CR, 1.6D TDI CR, 2.0D TDI CR Codes: CAGA, CAGB, CAGC, CAHA, CAHB, CFHC, CBAA, CBAB, CFFB, CGLA, CGLB, CJCA, CJCB, CAAA, CBAA, CBAB, CBAC, CBBA, CBBB, CBDA, CBDB, CBDC, CCHA, CEGA, CJAA, CAAB, CAAC, CFJA, CFWA, CAYB, CAYC, CAYA

TECHNICAL TOOLS ENGINE

1 2 3

4 5 6 7 8 9 10 11 155

TECHNICAL TOOLS ENGINE

1 2

OM 4010 TIMING TOOLS VAG 1.2 PETROL

Models: VW: Fox, Lupo, Polo Skoda: Fabia, Roomster Seat: Ibiza, Cordoba Engines: 1.2 6V, 1.2 12V (petrol engines with chain) Codes: AWY, AZQ, BME, BBM, BMD, BXV, BZG

4 5

OM 4013 CAMSHAFT LOCKING KIT VAG 3L V6 30V

Models: Audi A4, A6, A8, Cabrio >2008 Codes: ASN, AVK, BBJ

6 7 8

OM 9232 TIMING CHAIN ADJUSTMENT KIT VAG 1.4-1.6 FSI

This kit includes the water pump extractor and engine pulley extractor as well as a comparator.

9 10 11 156

Models: VW : Polo, Golf, Golf Plus, Touran, Passat, Jetta, Eos, Tiguan Audi : A3 Skoda : Octavia, Fabia, Roomster Engines: 1.4-1.6 FSI (chain), 1.4 TSI Codes: AXU, BAG, BKG, BLF, BLN, BLP, BLG, BMY, BTS, BWK, CAXA

TECHNICAL TOOLS ENGINE

OM 4014 SUPPORT SET FRONT END VAG

These tools allow you to disengage the engine when working on the timing.

Models: Audi: A4, A5, A6, A7, A8 VW: Passat, Passat cc

OM 3651 WATER PUMP LOCKING TOOL VW AUDI Suitable for: Polo, Golf, Passat, Audi 80/A4.

OM 3631 TOOL FOR TENSION PULLEY, VAG TENSIONER >1991

OEM code: T10025

5 6

OM 3660 LONG TENSIONING BELT SPANNER VAG L.250mm

OM 3661 SHORT TENSIONING BELT SPANNER VW L.170mm

OM 2334 26 PIECES 1/2" D. XZN SOCKET BIT SET

Composition: • 8 sockets L.55mm : M5, M6, M8, M9, M10, M12, M14, M16 • 7 sockets L.100mm : M5, M6, M8, M9, M10, M12, M14 • 7 sockets L.140mm : M5, M6, M8, M9, M10, M12, M14 • 4 sockets L.200mm : M8, M10, M12, M14

8 9 10 11 157

TECHNICAL TOOLS ENGINE

OM 6600 MASTER TIMING TOOL SET FORD/ VW/SEAT/MAZDA/VOLVO

2 3

570mm

5 375mm

6 7 8 9 10 11 158

Models: Ford: Fiesta, Fusion, Courier, Escort, Focus, Focus C Max, Puma, Mondeo, Sierra, Transit, Connect, Cougar, Courier, Courier Kombi, Galaxy ,C-Max ,Orion, Tourneo Connect, Transit, Transit Connect VW: Sharan Seat: Alhambra Mazda: 121 Volvo: S40, V50 petrol, 1.8 D, 1.8 TD, 240 D, 740 D, 760 D, 940 D, 960 D Turbo Engines: 1.2, 1.4, 1.6, 1.6 16V, 1.7 16V courroie, 1.8-2.0 16V (courroie et chaine), 1.4, 1.6 16V Focus et Mazda 121,1.6 Duratorq TDCI, 1.8 D, 1.8 TD (88-00), 1.8 DI (courroie) (98-04), 1.8 TDCI (courroie) (01-04), 1.6 D, 1.9 TDI, 2.5 D/TCI (courroie) ,1.9 TDI, 2.5 D/TCI (courroie), 1.25, 1.6 TI-VCT, 1.6 SCTI, 1.4 D TDCI, 1.6 D TDCI, 1.8 D, 1.8 D TCI, 1.8 D TDDI, 1.8 D TDCI, 1.8 D Turbo, 1.8 D Turbo, 1.9 D TDI PD, 1.9 D TDI PD, 2.0 D TDCI, 2.2 TDCI, 2.5 D, 2.5 D Turbo, 2.0, 2.2, 2.4 Duratorq TDCI 16V, 1,4 D TDCI, 1,6 D 8V, 1,6 D 16V Codes: FUJA, FUJB, FXJA, FXJB, FXJB, FYJA, FYJB,F8JA, F8JB, M7JA, M7JB, DHA, DHB, DHC, DHD, DHE,DHF, DHG, FHA, FHE, L1T, L1V, L1E, L1G, L1H, L1K,RDA, RDB, RKC, RQB, RQC,

FXDA/C, FXDB/D, FYDA/C,FYDB/D, FYDH, HWDA1Z, AHU, AVG, AFN, D24, D24T,D24TIC, RFN, RTJ, RTK, RVA, RFK, RKD, B4164S3, DV4TD (8HW/8HX/8HZ), DV4TED4(8HV/8HY), DV6ATED4 (9HX/9HY/9HZ) F6JA, F6JB, F6JC, G8DA, G8DB, KKDA, SNJA, SNJB, STJA, STJB, ASDA, ASDB, FXJC, SPJA, SPJC, FYJC, HWDA, HWDB, SHDA, SHDB, SHDC, JQDA, LQDB, JTDA, JTDB, HXDA, HXJA, HXJB, IQDA/B, IQDB, PNBA, PNDA, RHBA, SIDA,F6JD, TZJA, TZJB, HHDA, HHDB, HHJA, HHJC, HHJD, HHJE, HHJF, RTA, RTB, RTC, RTD, RTG, RTE, RTF, RTH, RTJ, RTK, RFN, BHPA, HCPA, HCPB, KKDA, P7PA, P9PA, P9PB, R2PA, R3PA, RWPA, RWPC, F9DA/B, FFBA, FFWA, KHBA, QYBA, QYWA, KKDB, C9DC, RVA, 1Z, AFN, AHU, ANU, AUY, G6DA, G6DB, G6DC, G6DD, G6DE, G6DF, G6DG, UFDB, TXDB, TYDA, UKDB, QXBA, AZBA, KLBA, QXBB, LPBA, AZBC, TYBA, UKBA, UFBA, TXBA, IXDA, QXWA, QXWB, AZWA, KLWA, AZWC, TYWA, UKWA, TXWA, UFWA, UFDA,TXDA, UKDA, Q4BA, KNBA, 4BA, 4BB, 4BC, 4CC, 4FA, 4CA, 4CB, 4DA, 4EA, 4FA, 4FB, 4FC, 4FD, 4GA, 4HB, 4HC, 4EB, 4EC, 4ED 4GA, 4GB, 4GC, 4GD, 4GE, 4GF, 4HA, 4HD,FMBA/B, D5BA, ABFA, D3FA, D6BA, HJBA/ B,F3FA, D2FA, D4FA, F4FA, FIFA, DOFA, QJBA, QJBB, QJBC, QJBD, FXFA, H9FA, H9FB, N7BA, N7BB, MZ-CD 1.6, Y6

TECHNICAL TOOLS ENGINE

N°

CODE OEM

REF

21-105

SA 6621

DESIGNATION CAMSHAFT LOCKING TOOL

2064 2

23-047 310-055

SA 6622

INJECTION PUMP LOCKING PIN

N° 23

21-260 303-732

SA 6623

INJECTION PUMP LOCKING PIN 5mm

303-1061

SA 6624

CAMSHAFT LOCKING TOOL

303-1060

SA 6625

FLYWHEEL LOCKING TOOL

0132-AB 0178-D

SA 6626

FLYWHEEL LOCKING PIN

21-151 0194-B 7

21-263 303-735 21-234 21-251

SA 6627

303-734 21-163 303-620

SA 6628

FLYWHEEL LOCKING PIN

SA 6629

FLYWHEEL LOCKING PIN

SA 6630

FLYWHEEL LOCKING PIN

SA 6631

FLYWHEEL LOCKING PIN

23-020

SA 6632

INJECTION PUMP LOCKING PIN

21-123

SA 6633

FLYWHEEL LOCKING PIN

SA 6634

LOCKING THICKNESS TOOL

17 20 21 22

323-029 21-229 303-651 21-238 303-679A 303-1151 21-234 21-251

303-679A

SA 6645

PUMP ALIGNMENT TOOL

SA 6646

TENSIONER PULLEY LOCKING PIN

23-019

SA 6647

INJECTION PUMP LOCKING PIN 6mm

SA 6648

TENSIONER PULLEY LOCKING TOOL

SA 6649

CRANKSHAFT LOCKING TOOL

SA 6650

LOCKING PIN

SA 6651

FLYWHEEL LOCKING TOOL

SA 6652

FLYWHEEL LOCKING PIN

35 36

23-058 310-084 23-059 310-085 21-104 303-193 21-168 303-393 23-019 303-652 303-0985 303-393 303-393-02 303-393 303-393-01

SA 6653

TIMING CHAIN FRONT COVER ALIGNMENT TOOL

SA 6654

TENSIONING TOOL

SA 6655

FLYWHEEL LOCKING TOOL

SA 6656

FLYWHEEL LOCKING TOOL

SA 6657

CAMSHAFT LOCKING TOOL

21-162B 37

303-376 303-376B

SA 6635

CAMSHAFT LOCKING TOOL

303-376 16

PUMP ALIGNMENT TOOL

303-1054

21-162B 303-367

SA 6644

21-210

303-679A

FLYWHEEL LOCKING PIN

SA 6636

CAMSHAFT LOCKING TOOL

SA 6637

CAMSHAFT SPROCKET PULLER

SA 6640

PUMP ALIGNMENT TOOL

SA 6641

PUMP ALIGNMENT TOOL

SA 6642

FLYWHEEL LOCKING PIN

1 2

303-1151

49 JE 02 020 10

FLYWHEEL LOCKING PIN

0194-C 21-262

SA 6643

21-238

49 JE 02 021 8

303-698

DESIGNATION

303-1151

303-675

REF

21-238 24

U20003 3

CODE OEM

SA 6658

INJECTION PUMP LOCKING PIN

303-1054

SA 6659

TENSIONER PULLEY LOCKING PIN

303-748

SA 6660

FLYWHEEL LOCKING PIN

303-1097

SA 6661

CAMSHAFT SPROCKET LOCKING TOOL

303-1059

SA 6662

FLYWHEEL LOCKING PIN

SA 6663

INJECTION PUMP LOCKING PIN

SA 6664

FLYWHEEL LOCKING TOOL

SA 6665

FLYWHEEL LOCKING TOOL

4 5 6 7

0153-M 44

0178-C 0178-D

0178-B 5711-TB

8 9

Timing tool finder with OEM codes p.422

10 11 159

TECHNICAL TOOLS ENGINE

1 2 3

4 5 6 7 8

OM 4008 TIMING TOOLS FORD/VW/SEAT/VOLVO/MAZDA PETROL-DIESEL

Models: Ford: Fiesta, Fusion, Escort, Focus, Focus C-Max, Puma, Mondeo, Sierra, Transit, Connect, Cougar, Courier, Courier Kombi, Galaxy, Tourneo, S-Max VW: Sharan Seat: Alhambra Mazda: 121, 2, 3 Volvo : S 40, V 40 essence,V 50, 240D, 740D, 760D, 940D, 960D Turbo Petrol engines: 1.2, 1.25 16V, 1.4, 1.4 16V, 1.6, 1.6 16V, 1.7 16V, 1.8 16V, 2.0 16V, 2.3 16V Diesel engines: 1.4 D, 1.4 TDCI ,1.6 TDCI, 1.8 D, 1.8 TD, 1.8 TDDI, 1.8 TDCI, 1.6 D, 1.9TDI, 2.5 TDCI, 1.9TDI, 2.5 TDCI Codes: FUJA, FUJB, FXJA, FXJB, FXJB, FYJA, FYJB, F8JA, F8JB, M7JA, M7JB, DHA, DHB, DHC, DHD, DHE, DHF, DHG, FHA, FHE, L1T, L1V, L1E, L1G, L1H, L1K, RDA, RDB, RKC, RQB, RQC, FXDA/C, FXDB/D, FYDA/C, FYDB/D, FYDH, HWDA1Z, CTA, AVG, APN, D24, D24T, D24TIC, RFN, RTJ, RTK, RVA, RFK, RKD, B4164S3, DV4TD 8HW/8HX/8HZ), DV4TED4 (8HV/8HY), DV6ATED4 (9HX/9HY/9HZ), F6JA, F6JB, F6JC, G8DA, G8DB, HHDA, HHDB, HHJA, HHJB, RTN, RTQ, RTP, C9DC, BHDA/B, BHPA, C9DA/B, C9DC, F9DA/B, FFBA, FFDA, HCPA, HCPB, KKDA, P7PA, P9PA, QYWA, R2PA, R3PA, RWPA-G6DA, AZWA, G6DB, QXWA, G6DC

OM 3640 LONG PIN FORD ZETEC

OM 3646 SHORT PIN FORD ZETEC

Ø7.85mm

OM 4016 TIMING TOOLS FORD 2.0-2.2-2.4 TDCI-TDI

Models: Focus C-Max, S-Max, Mondeo, Transit, New Galaxy Engines: 2.0, 2.2, 2.4 Duratorq TDCI 16V Codes: FMBA/B, D5BA, ABFA, D3FA, D6BA, HJBA/B,F3FA, D2FA, D4FA, F4FA, FIFA, DOFA, QJBA, QJBB, QJBC, QJBD, FXFA, H9FA, H9FB, N7BA, N7BB

9 10 11 160

Ø4.75mm

OM 4116 TIMING TOOLS 1.6 TI-VCT 16V DURATEC

Models: Ford: Fiesta, Focus, Focus C-Max, Mondeo Engines: HXDA, HXJA, PNBA, RHBA

OM 3641 PIN FORD DURATEC Ø6.95mm

TECHNICAL TOOLS ENGINE

OM 9283 TIMING TOOLS MERCEDES/CHRYSLER/JEEP PETROL-DIESEL DCI

2 Models: Mercedes: 190, 200, 300, 500, 208, 210, 600sl, 300sl, 308d, 500sl, 410d, 812, A160 CD, B180 CDI, B200 CDI, C180, C200D Chrysler: PT Cruiser Jeep: Grand Cherokee Engines: 1.6, 1.8, 2.0, 2.1, 2.2, 2.2 CRD, 2.3, 2.5, 2.7, 2.7 CRD, 3.0, 3.2, 3.9, 4.0, 4.2, 5.0

OM 4129 TIMING TOOLS CHRYSLER 2.5-2.8 CRD

Models: Voyager, LDV Maxus Engines: 2.5, 2.8 CRD Codes: R2516L VM39/40B 05-2009, R2516C, R2816C5.05A 01-2008

3 Timing tool finder with OEM codes p.422

4 5 6 7

AC 6001 TOP DEAD CENTER INDICATOR 1.5

Universal PMH control indicator Suitable for diesel and petrol engines

Contents: • 1 indicator gauge • 6 universal petrol and diesel adapters • 1 magnetic support • 1 extension 210mm • 1 hose 1.5m

9 10 11 161

TECHNICAL TOOLS ENGINE

OM 3800 INJECTION PUMP EXTRACTOR BMW 2.0-3.0 DIESEL

Ring dimensions: Ø40x1.5mm and Ø42x1.5mm Models: E87, E46, E90, E39, E60, E63, E38, E65, E83, E53, E70 Series: 1, 3, 5, 6, 7, X3 Engines: M47-M57

2 3

4 5 6 7

OM 3736 INJECTION PUMP PULLEY EXTRACTOR BMW/OPEL/ROVER

Models: E60, E81, E83, E87, E90 Series: 1, 3, 5, X1, X3, X5 Engines: N47-N47S 2.0 (chain)-N57

Ø29.8mm

OM 3738 TIMING TOOLS MINI/PSA 1.4-1.6 16V PETROL

OM 3677 DAMPER PULLEY LOCKING TOOL BMW-PSA PETROL

OM 3657 TIMING TOOLS BMW PETROL

8 9 10 11 162

Models: BMW: 1.6, 1.8, 2.0, 2.5, 3.0 Mini Cooper/Cooper S: 1.41.6 Citroën: C4/C4 Picasso Peugeot: 207/207 CC, 308 Codes:

N40, N42, N45/N45T, N46/N46T, N51, N52/ N52K, N53, N54 N12 B14AB, B12 B16A Mini R55/R56

Models: 316, 318, 518, Z3 Codes: E30, E34, E36, E46, M40, M43

OM 9217 INJECTION PUMP PULLEY EXTRACTOR BMW-OPEL DIESEL

TECHNICAL TOOLS ENGINE

OM 4004 TIMING TOOLS BMW DIESEL

Models: BMW: E87 (03-07) 120d, E87 (03-07) 318d/t, E46/E90/91 (00-08) 320d/cd, E46/E90/91 (97-08) 325d, E90/91/92/93 (06-09) 330d/xd/ cd, E46/E90/91/92/93 (98-08) 335d, E90/91/92 (06-09) 520d, E39/ E60/61 (99-09) 525d/xd, E39/E60/61 (99-09) 530d/xd, E39/E60/61 (98-09) 535d, E60/61 (04-09) 635d, E63/64 (04-09) 730d/Ld, E38/ E65/66 (98-08) X3 2.0d, E83 (03-07) X3 3.0d/sd, E83 (03-09) X5 3.0d, E53/E70 (00-09) Land Rover: Freelander (Td4) MG-Rover: 75 2.0 CDT/CDTI (99-04-04) Engines: M47, M57 (chaine), M47R Codes: 30 6D 2, 30 6D 1, 20 4D 1, 20 4D 4, 30 6D 3, 30 6D 4, 30 6D 5, 25 6D 1, 25 6D 2

2 3

OM 3673 TIMING TOOLS BMW/ROVER/OPEL PETROL-DIESEL

Complete kit to let you correctly position the camshaft and engine shaft while changing the timing belt

Models: BMW: 318tds/Compact (E36), 318iS (E30), 318iS Coupé Compact (E36), 318TI Compact (E36), 320i, 323i, 325i, 328i (E36), 520i (E34/E39), 523i (E39), 525i (E34), 528i (E39), 728i (E38), Z3 1.9/2.8i (89-98) BMW petrol engines: 316i/Compact (E30 1.6/E36/E46), 318i (E30 E36 E46) 518i (E34 VANOS), Z3 1.8/1.9i (88-04)

BMW diesel engines: 325 TD/TDS (E36), 525 TD/TDS (E34/E39), 725 TDS (E38) (91-03) Rover: 75, Range Rover Opel/ Vauxhall: Oméga Engines: 2.5 TD/TDS Codes: M40 (belt), M43 (chain), M42, M44, M50, M52 (chain)

6 7

OM 3658 TIMING TOOLS BMW 2.0 DIESEL

8 Models: 1 series (E81, 82, 87, 88), 3 series (E90, 91, 92, 93), 5 series (E60, 61), X3 (E83), Mini Engines: 2.0 Codes: N47 D20A, N47S D20B/TO, F20 2007-2013, F30 2007-2013, F10, F11 2007-2013, F25 2007-2010, N57, C20U1 2012-2013, N47 C16K1, C16U1 2012201

9 10 11 163

TECHNICAL TOOLS ENGINE

AC 2017 INJECTION PUMP ADJUSTMENT KIT DIESEL

Lets you lock BOSCH VE, EPVE KIKI, NIPODENSO, CAV, ROTODIESEL pumps

2 3

4 5

AC 5018 PETROL/DIESEL STROBE LIGHT 9-16V

6 7 8 9 10 11 164

This tool should be used with the manufacturer data. Non provided.

AC 6001 TOP DEAD CENTER INDICATOR 1.5 Universal PMH control indicator Suitable for diesel and petrol engines Contents: • 1 indicator gauge • 6 universal petrol and diesel adapters • 1 magnetic support • 1 extension 210mm • 1 hose 1.5m

TECHNICAL TOOLS ENGINE

OM 3792 SOCKETS FOR BOSCH INJECTION PUMP This kit allows to remove the anti-tamper screw on the injection pump (Bosch CR and TDI). These sockets are required to loosen and remove the triangular headed anti-tamper screw on the quantity adjuster's top cover.

1 2

OM 3730 EPIC PUMP TIMING PIN DIESEL EPIC injection pump timing pin Mercedes/Renault/PSA

OM 9211 ADJUSTMENT KIT FOR RAM PUMP SYSTEM (RENAULT F8QT-F9Q) For 1.9DTI & TD engines

4 5

OM 6412 SPECIAL TOOL FOR TURBO 12mm

Suitable for VW, Audi V6 et TDI, Skoda, Seat

NEW

OM 3804 FUEL INJECTION PUMP SOCKET MERCEDES Mercedes-Benz engine applications: 601. 602. 603. 605. 606. 615. 616. 617 • 33 pt • 56mm long • 1/2" D.

OM 3744 BI-HEX DIESEL INJECTION PUMP WRENCH 13mm Suitable for Audi, Alfa Romeo, Citroën, Chrysler, Ford, Fiat, Nissan, Peugeot, Rover, Renault, Seat, Vaxhall/Opel, VW, Volvo

6 7 8

• Chrome Vanadium • 90° angle for leverage

9 10 11 165

TECHNICAL TOOLS ENGINE

1 2

OM 3753 UNIVERSAL TIMING GEAR HOLDER Maintains or rotates the camshaft through the pulley lock.

Handle can be adjustable in 3 positions with a wing nut. Pulley holding cursor is made of steel, which allows locking with free rotation wing nut, such as wing nut for presses. The handle is ergonomic, the tool is strong and high quality notches on cursors allows a good grip on the pulley

• • • •

Minimum lenght: 340mm Maximum lenght: 380mm Width: 65mm Adjustable width lenght and locking: 50 to 195mm

OM 3754 TIMING BELT FITTING TOOL

OM 3653 UNIVERSAL PULLEY LOCK SPANNER

This tool is designed to set up ribbed V-belt on pulleys easily. Universal, useful when accesses are restricted.

6 7 8 9

Lenght: 710mm

OM 9314 UNIVERSAL TIMING BELT PULLEY LOCKING TOOL This tool is a toothed pulley locking kit designed to keep the pulley steady while replacing the timing belt. This kit can be used on every engines with 1, 2 or 4 camshafts, and for injection pump pulleys.

10 11 166

The main tool can be universal, and adapt to the pulleys distance by adjusting the gap thanks to its 2 guides. The flange can be used separately on an independent pulley.

TECHNICAL TOOLS ENGINE

OM 4031 RIBBED DRIVE PULLEY PULLER

This tool allows to remove the crankshaft pulleys without damage.

2 3

Characteristics • Adjustable arms from Ø45 to 165mm • Arms and extraction: 3/8" D. or hex 16mm • No engine removal required • Pulley capacity: 45 to 165mm • Pulley groove thread : 3.56mm

OM 4045 UNIVERSAL BELT PULLEY PULLER Ø40-63mm This universal belt pulley puller 3 arms is made for the damage free drawing off of pulley belts.

5 • • • •

To remove 2 to 9 arm pulleys (30mm max) Universal suitable for several diameters (ext. Ø90mm max) Suited for working on and finishing engines No suitable for 1.5DCI (see OM 3413)

6 7

OM 4046 UNIVERSAL BELT PULLEY PULLER QUICK APPROACH Ø48-82mm

NEW

Less space requirement

To remove 2. 3. 6. 9 arm pulleys

9 SA 6637 CAMSHAFT SPROCKET PULLER SA 6215 FLYWHEEL PULLEY PULLER

For OM 6600/OM 4036 • Arms lenght: 30mm • Ø max: 65mm • Total height without traction bolt: 45mm

For OM 6200/OM 3737/OM 4002 For all PSA XUD Diesel pumps.

10 11 167

TECHNICAL TOOLS ENGINE

1 2 3

AC 5099 ELECTRONIC TENSION GAUGE FOR BELTS (in HERTZ) Measures the tension, expressed in Hertz, of all timing and accessory belts.

Manufacturer data catalogue SA 5099 supplied

• Multibrand • Measurement range 30 to 520Hz • Accurate to ± 1Hz from 0 to 100Hz and 1% if > 100Hz • Power supply 9V battery • Average calc. time 30 sec max • Battery life 50h of use • Automatic shutdown after 120 sec

2 microphones: can be used in a noisy environment

4 5 6

OM 3654 UNIVERSAL BELT SPANNER

OM 3494 MECHANICAL TENSION GAUGE (IN NEWTONS) For checking notched timing and accessory belts. This tension gauge can also be used on K4 K5 K6 belts, alternators, aircon compressors, steering assisted, fans

7 8

Mandatory manufacturer data in Newtons.

9 10 11 168

OM 4049 NEW STRETCH BELT INSTALLATION AND REMOVAL TOOL For installing ans removing elastic belt without automatic tensioner. Special profile for use on many pulley diameters.

Compact: high accessibility in the engine compartment Easy to use : without any adjustment

TECHNICAL TOOLS ENGINE

OM 9259 SET OF 5 POLYGONAL WRENCHES FOR DISTRI. PULLEY NUTS & ACCESSORIES

SA 9259 SPANNER Ø12mm

For OM 9259

These spanners are specially designed for working on hard-to reach pulley nuts and belt tensioners.

SA 9261 SPANNER Ø14mm

m 30m

For OM 9259

SA 9262 SPANNER Ø18mm For OM 9259

Ø19mm

Ø17mm

Ø16mm

SA 9263 STRAIGHT SPANNER Ø15mm

Ø13mm

Ø15mm

For OM 9259

SA 9264 STRAIGHT SPANNER Ø10mm

OM 9459 SET OF 8 FEMALE TORX WRENCHES FOR DISTRI. PULLEY NUTS & ACCESSORIES

For OM 9259

4 5 6

430mm

E22

0m m

These wrenches are specially designed for working on hardto reach pulley nuts and belt tensioners.

E20

E18

E16

OM 4029 STRETCH BELT INSTALLATION AND REMOVAL TOOL This tool is necessary for fast and easy installation and removal of the trapezoidal stretch belt without damaging it. Designed for single pulley engines.

E14

E12

E10

7 8 9 10 11 169

TECHNICAL TOOLS ENGINE

7 installation mandrels suit 21.5mm through 64mm seals. Removal: compact puller with unique extracting hooks, quick removal without any damaging. Installation: interchangeable seal mandrels, use vehicule crank or cam bolt to evenly press seal into position.

OM 5038 CAMSHAFT & CRANKSHAFT SEAL TOOL KIT

2 3

SA 5038 HOOKS

NEW For OM 5038

4 5 6 7

OM 9216 SET OF HOOKS FOR JOINTS 4 PIECES

Special hooks for joints L.130mm

OM 5032 KIT WITH CLAMPS + PLUGS FOR LINES – HOSES – BANJO CONNECTORS

8 9 10 11 170

Contents: • 2 hose clamps : lock Ø7.94mm • 2 clamps for BANJO connectors • 1 hose clamp : Ømax 26mm • 6 conical plugs: Ø4 to 9mm

TECHNICAL TOOLS ENGINE

OM 3679 FREEWHEELING ALTERNATOR PULLEY DISMANTLING KIT 22 PCS

Set of spanners and locknuts that let you dismantle the freewheeling pulley of the alternator (on or off the vehicle) Special 1.6 HDI and TDCI PSA/FORD

2 Detail of ends on request

4 5 Suitable for: Renault, Peugeot, Citroën, VAG, BMW, Mercedes, Opel, Ford, Fiat, Toyota, Honda, Porsche...

SA 5350 TORX BIT T50

SA 5325 ROUND TORX WRENCH T50 1/2" D.

For OM 3679

6 7 8

OM 9257 ALTERNATOR REMOVAL KIT RENAULT • 2 sizes XZN 10mm-L.110mm/60mm • 1 pierced staged spanner 21-28mm

9 10 11 171

TECHNICAL TOOLS ENGINE

NEW

OM 0347 ENGINE CRANK ROTATOR TOOL DAF Suitable for DAF XF 105, Euro5.

125

105

22 70

Suitable for 8360.46/F3A/F3B engines Specific for Eurocargo/Cargo 150E27R/FPR 320E27T/PT Eurotech/Eurostar

Ø 8.5

126

105

OM 0340 FLYWHEEL ROTATOR TOOL FOR IVECO ENGINES

126

Ø 8.5

105

OM 0339 FLYWHEEL ROTATOR TOOL FOR IVECO ENGINES

Ø 8.5

8 9

Suitable for MAN engines D20, D25, D26, D28.

OM 0302 FLYWHEEL ROTATOR TOOL FOR MERCEDES/MAN ENGINES

9.5

61.5

NEW

58.5

OM 0348 CAMSHAFT ROTATOR MAN

Suitable for 8040-25-45/9060-2545/8210.42/8260/8280/190.38/190.42 Specific for Eurocargo/Cargo /Eurotech/Heavyon/ OffRoad/Bus

2 gears Suitable for Actros 6,8,10 cylinder engines Mercedes 400, 401, 402, 403, 404, 407, 409H/HA, 421, 424, 441, 444A/LA, 427, 4289, 447H/HA Man 12 cylinder engines

11 172

58.5 81.5

Suitable for Actros/Atego Mercedes 900, 904, 906 Man 5, 6, 8 cylinder engines, D25/D28

61.5

OM 0304 FLYWHEEL ROTATOR TOOL FOR ACTROS/ATEGO/MAN ENGINES

CH 19

83 1/2”

Ø 27.5

Ø 44

OM 0328 FLYWHEEL ROTATOR TOOL FOR RENAULT MAGNUM ENGINES

TECHNICAL TOOLS ENGINE

65.5

Ø 51 83 1/2”

Ø 44

Ø 27.5

65.5

1/2“

OM 0327 FLYWHEEL ROTATOR TOOL FOR RENAULT/VOLVO ENGINES

Ø 39

Suitable for Volvo MP8/MP10, FH, D13A520 and Renault engines OEM 88800014

OM 0346 ENGINE CRANK ROTATOR TOOL SCANIA NEW

Suitable for SCANIA after 1996 and BJ 2003R.

7 Ø 31.6

OM 0325 FLYWHEEL ROTATOR TOOL FOR VOLVO ENGINES

Ø 7.5 116.6 138

OM 0326 FLYWHEEL ROTATOR TOOL FOR VOLVO ENGINES

Ø 31.6

Suitable for D9A, D12, D16C engines OEM 9996956

11 173

Ø 51

TECHNICAL TOOLS ENGINE

OM 3413 TRIPLE ARM EXTRACTOR Ø90mm WITH BUTTERFLY LOCKING 65mm

110mm

2 3

17mm

OM 3414 TRIPLE ARM EXTRACTOR Ø160mm WITH BUTTERFLY LOCKING

OM 3415 TRIPLE ARM EXTRACTOR Ø250mm WITH BUTTERFLY LOCKING

5 145mm

165mm

225mm

90mm

7 30mm

25mm

OM 3423 HYDRAULIC GEAR PULLER SET 10T Max.

9 10 11 174

Composition : • SA3423 :1 hydraulic spindle with 10T and centering pin • Various puller legs 100-150-200mm • Bearing separator up to Ø105mm • Various yokes 2 & 3 legs • Various extensions

TECHNICAL TOOLS ENGINE

OM 3412 GEAR AND BEARING PULLER/SPLITTER SET

Composition : • 2 arms for 80mm long knife • 2 arms for 120mm long knife • 2 arms for 60mm long knife • 2 arms for 95mm long knife • 1 arm support max capacity 160mm • 1 separator knife min 19mm max 70mm • 1 separator knife min 5mm max 65mm • 1 centering cup Ø28mm

OM 3418 BEARING EXTRACTOR SET INTERNAL GRIP Ø8-58mm

3 Composition : • 1 slide hammer, length 280mm, weight 1kg • 1 internal-grip tip 8mm to 11mm • 1 internal-grip tip 12mm to 17mm • 1 internal-grip tip 18mm to 23mm • 1 internal-grip tip 24mm to 29mm • 1 internal-grip tip 30mm to 34mm • 1 internal-grip tip 34mm to 38mm • 1 internal-grip tip 39mm to 43mm • 1 internal-grip tip 44mm to 48mm • 1 internal-grip tip 49mm to 53mm • 1 internal-grip tip 54mm to 58mm

OM 3410 SLIDE HAMMER/PULLER SET 10 PIECES

4 5 6 7

8 9 10 11 175

TECHNICAL TOOLS CLUTCH Nowadays, vehicles are more and more equipped with SAC clutches (Self Adjusting Clutch). These clutches are self-adjustable thanks to their automatic adjustment mechanism which balances the increasing loosening that comes about with wear of the clutch disc. This device ensures regular clutch strength over time and optimal comfort.

1 2 3

OM 0619 CLUTCH ASSEMBLY/DISASSEMBLY Applications: Audi BMW Chevrolet Daewoo Fiat Ford Honda Hyundai

Kia Land Rover Mazda Mercedes Mitsubishi Opel/Vauxhall Porsche PSA Renault/Nissan

Saab Suzuki Toyota Volvo VW/Skoda/Seat If you need more details, please contact us.

4 5

Supplied with new pin for Puma and Opel engines

6 Made in France

7 8 9 10 11 176

You need to be careful when assembling these clutches because it could deform the clutch mechanism bell cover or displace it if it is done incorrectly. To avoid these problems, the assembly/removal of SAC clutches must be carried out with a special tool.

Self adjusting clutches are easily recognizable thanks to 2 or 3 yellow clips located on the mechanism

TECHNICAL TOOLS CLUTCH

OM 0617 CLUTCH ALIGNMENT TOOL

OM 0609 UNIVERSAL CLUTCH ALIGNMENT SYSTEM

Made up of a main part and two expanding, interchangeable cones that adapt to all models of clutch disc. • Length 150mm • Sockets Ø15-16-17-19-20-21-23-25mm

For positioning single and double disc clutches.

Composition: • 1 expanding guide from 36 to 45mm • 1 expanding guide from 44 to 52mm • 4 centring valves Ø20-25-27-30mm

For Fiat Ducato and Peugeot Boxer from 1994 with pull-type clutch. For extracting clutch stem to remove the transmission.

HU 8005 GEARBOX REFILLING DEVICE 12.5

Characteristics: • Manual debit: 0.1l/pumping • Pneumatic debit: 0.18 a 0.2l/sec • Maximum pressure: 7bar • Drain valve of tank : 1bar • Hose lenght: 150cm • Supplied with 10 connectors • Graduated bowl • Manometer 60psi • Transport handle • 1/4 turn valve supply/drain • Deported filling plug

4 5

OM 0618 CLUTCH AXIS EXTRACTOR FIAT DUCATO

Includes a kit of adaptation with various outlet angles: made for the poorly accessible areas.

2 3

OM 0620 HGV CLUTCH ALIGNMENT TOOL

Pneumatic and manual pump of fluid refilling.

SA8515: refill adapter set

8 9 10 11 177

TECHNICAL TOOLS CYLINDER HEAD

1 2

AC 3300 CO DETECTION KIT • Checks for combustion gases in the radiator. • The test fluid changes colour if a leak is detected. • Fast identification of defective head gasket.

AC 3350 CO DETECTION FLUID

15 tests

For AC 3300

5 6

• Extended steel probe: 290mm • Total length: 1100mm

8 OM 7015 BOX 1/2" TORX SOCKETS 140mm E10-E12-E14-E16-E18

10 Special cylinder head impact sockets

11 178

1 refill = 15 tests

OM 5026 MECHANICS STETHOSCOPE

1- With the engine hot, take off the radiator cap or the expansion-tub cap and pour in the indicated dose of the tracking fluid.

Very simple diagnostic tool for listening to engines, cylinder heads, gearboxes, bearings... Made with steel and plastic, this tool is oil proof and helpful with noises research.

TECHNICAL TOOLS CYLINDER HEAD

OM 0624 8 PCES STUD REMOVER/INSTALLER

Contents: • Extraction locknut • Extraction locknut • Extraction locknut • Extraction locknut • Installation socket • Installation socket • Installation socket • Installation socket • 6mm locking key

socket M6x1.0mm socket M8x1.25mm socket M10x1.25mm socket M10x1.5mm M6x1.0mm M8x1.25mm M10x1.25mm M10x1.5mm

This set allows the user to extract and replace the threaded studs without any damage. It contains 4 extraction sockets locknut type and 4 sockets for placing.

1 2 3

HU 0511 OIL CAN 500ml 500

OM 8087 LONG FLEXIBLE SHAFT PICK UP 700

This tools allows to retrieve and pick-up small metallic or not metallic objects in confined areas. The 4 curved claws ensure a correct grip, and the powerfull magnet is ideal for metallic parts.

4 5 6

Technical datas: • Total length: 700mm • Magnet Ø15mm • Flexible shaft and aluminum bracket

OM 0761 TORQUE WRENCH 1/2" D. 40-210Nm 540mm Delivered with calibration certificate

OM 0750 1/2" ANGLE SPANNER WITH MAGNETISED ARM

7 8 9 10 11 179

TECHNICAL TOOLS CYLINDER HEAD

OM 0106 VALVE STEM SEAL DISMOUNTING PLIERS

2 3

OM 0110 CYLINDER HEAD HOLDER SET

4 5 6 7 8

OM 0104 VALVE SPRING LIFTER BOX

This tool is for compressing valve springs acting as a lever to increase strength and reduce effort. The compression cup can be adapted according to the spring’s diameter.

Composition: • 1 valve spring lifter • 3 mounting brackets • 4 compression cups Ø24, 28, 30, 36mm

OM 0103 VALVE SPRING LIFTER

Can be used generally on a wide variety of engines (OHC, OHV et CVH) Designed for petrol and diesel engines

11 180

Opening capacity 55-175mm, height under groove 165mm Ø25 & 30mm reversible adapters

OC 0302 SCRAPER AND UTILITY KNIFE SET

TECHNICAL TOOLS CYLINDER HEAD

OM 9120 SEPARATOR BLADES & CLEANING BRUSHES KIT

2 3

OM 0153 PISTON RING COMPRESSOR 53mm to 125mm

This piston ring compressor tool is necessary for the installation of pistons into the cylinder block. The compressor folds around the piston, holding the rings in their grooves and allowing the piston and ring assembly to slide into the bore without damaging the pistons or rings.

OM 0803 AUTOMATIC PUNCH Spring-loaded trigger lets you punch metal without using a hammer. Use the knob to adjust the impact force.

Made in France

In mechanics field, parts identification before dismantling is important. Length: 143mm Chrome vanadium steel, resharpenable, 36kg impact force.

OP 0102 PNEUMATIC VALVE GRINDING TOOL

7 8

This device grinds the valves automatically and perfectly evenly, by rotating alternately to the right and the left. All the rotating parts are precisely tooled, ensuring that the device has a long life. Sold in a plastic box complete with suction cups and sockets so that the valves can be picked up by the stem or the head Shaft speed adjustment carried out by increasing or decreasing the air flow.

Pneumatic grinding tool delivered with: • SA6955: 1 rubber suction cup Ø22mm • SA6956: 1 rubber suction cup Ø33mm • SA6957: 1 rubber suction cup Ø40mm • 1 articulated tip door socket Supplied in box

9 10 11 181

TECHNICAL TOOLS CYLINDER HEAD

AC 0517 EXTERNAL MICROMETER 0-25mm

OM 0614 SET OF TWO VALVE LAPPING TOOLS

AC 0528 MICROMETER 25-50mm

2 Dimensions of suction caps 15, 19, 27, 35mm

4 5

NEW

OM 0503 EXPANDING ENGINE CYLINDER HONE • Adjustable from Ø50 to Ø180mm • 3x100mm stones • Grit 240 medium

AC 0518 METRIC SIZE FEELER GAUGE

SA 5503 SET OF 3 STONES

6 7 8 9

For OM 0503

• 3 stones 100mm • Grit 240 medium

EG 0056 WIRE BRUSH

11 182

• Carbon steel wire • Soft grip handle

Handy wire brush ideal for a multitude of uses.

OM 0601 500kg ENGINE SUPPORT Max.

500

• 20 blades • 0.05 to 1mm • Resolution: 0.05mm

360° swivel head Adapts to all engines 4 adjustable mounting points Dimensions: 800x864x935mm

TECHNICAL TOOLS EXHAUST

OM 8091 TUBECUTTER Ø28mm to Ø67mm

1 2 Ømin. 28mm Ømax. 67mm

SA 5001 ROLLER KNIFE

For OM 8091

OM 8089 EXHAUST SYSTEM SEPARATOR Ø65 to Ø70mm

For separating the sleeved exhaust sections

6 OM 8098 CHAIN PIPE CUTTER

This tool is made to cut several types of pipes : steel, copper, PVC, aluminium and stainless steel pipes.

It can be used to cut exhaust pipes without dismantling.

Suitable for pipes Ø19 to 85mm and 2.5mm thick

SA 8068 REPLACEMENT CHAIN For OM 8098

OM 9263 EXHAUST COLLAR PLIER

8 9 10

Plier with hold-open device.

11 183

TECHNICAL TOOLS EXHAUST

A blocked catalytic converter increases pollution emissions and reduces engine performance. By connecting in place of the lambda sensor, this pressure gauge quickly detects a blocked catalytic converter.

AC 4070 EXHAUST PRESSURE GAUGE (FAP) 3

2 3

4 5

Contents: • 1 pressure gauge 0-1.5kg/cm3 (1.5bar or 0-20psi) • 1 braided steel line (withstands 280°C) L.3m • Lambda sensor adapters

OE 5027 INFRARED THERMOMETER -50°/1350° • Power supply 9V battery • Weight 180g

A LED display indicates the sensor crossing signal. Simulates the rich/poor signal to check the response from the calculator. Comes with alligator clip for fast easy connection. Display includes successful connection confirmation. Comes with battery charge level indicator. Power supply 9V battery (supplied)

9 10 11 184

Tests Zirconium and Titanium sensors and the computer.

AC 5330 LAMBDA SENSOR TESTER/SIMULATOR

Reliable measurements with a high quality laser sight. This thermometer allows safe contactless measurements.

OM 7046 7 WRENCHES SET FOR LAMBDA SENSOR Contents: • 1 wrench 27mm • 1 wrench 29mm

• 1 wrench 11/16" • 1 wrench 7/8"

Suitable for 1, 2, 3 and 4-lead sensors; heated and unheated.

OM 7043 2 PCES LAMBDA SENSOR SOCKET THREAD CHASER The lambda sensor threads are often damaged when installing them because of the heating of the exhaust. This set allows the operator to repair the thread on the exhaust tubes before he replace the lambda sensor.

Content: • M18x150mm tap • M12x125mm tap

OM 9274 ASSEMBLY/DISASSEMBLY SELF-LOCKING TIE-ROD WRENCH Ø35-45mm

TECHNICAL TOOLS STEERING ROD

To use with a 27mm wrench or a 1/2D. ratchet wrench.

Ø 89mm

Ø35 to 45mm

SA 7335 REPAIR KIT

400

For OM 9274

NEW

OM 9174 ASSEMBLY/DISASSEMBLY SELF-LOCKING TIE-ROD WRENCH Ø28-35mm

This tool is designed to remove the axial joint rod from the steering rack measuring 25 to 35mm diameter. The head is composed of a cage with three hardened steel rollers. The specific design of the head combined with the rotation of the tool causes the rollers self-lock between the body and the axial joint allowing screwing or unscrewing.

Ø 74mm

Characteristics: • Hardened steel rollers, nylon cage • 27mm Hex drive for more power • Body length: 400mm • Head Ø: 74mm • Weight: 1.550kg

m 0m

SA 9174 REPAIR KIT

For OM 9174

OM 0258 SET OF 4 LEVERS WITH STRIKE DISK

8 9

210mm

280mm

460mm

620mm

11 185

TECHNICAL TOOLS STEERING ROD

OM 9330 TIE ROD MASTER WRENCH

This wrench is made to install and remove ball joints with no need to remove the steering rack. It can be used with traditional 1/2" D. ratchets and extensions. Thanks to its capacity range (30 to 40mm), it is suitable for all types of LV and CV.

OM 3664 STEERING TIE-ROD DISASSEMBLY TOOL 30mm D.

5 6 7 8

160mm

locking wrench Ø20,25mm to Ø43,2mm

OM 9246 VAN STEERING TIE-ROD DISASSEMBLY TOOL

Specially for vans. 30mm D.

160mm

Locks from Ø32.25mm to Ø45.2mm

OM 0223 REINFORCED SELF LOCKING WRENCH Ø14-Ø23mm

10 11 186

Length: 380mm

TECHNICAL TOOLS BALL JOINT

OM 2605 LOWER BALL JOINT SOCKET PSA 52mm

This socket allows mounting and dismounting of the lower ball joints on some Citroën (C5, C6) and Peugeot (407, 607) models.

Characteristics : • 38mm D. (socket or wrench) • External Ø: 60mm • Internal Ø: 52mm • Depth (without pins): 32mm

• • • •

Height: 57mm Internal Ø (drive side): 23mm Pins heeight: 4mm Pins width: 5mm

OM 2555 BALL JOINT WRENCH INF PSA hex 41mm 1/2

OM 2505 LOWER BALL JOINT SOCKET PSA

4 5

35mm hexagon drive Ø51x43mm

OH 5020 HYDRAULIC BALL JOINT PULLER KIT Ø30-34-40mm Max.

8T force

8 9 OM 2600 BALL JOINT SEPARATOR Ø18mm Max.

To remove rod ends. Suitable for most of light vehicles.

• Width opening: 20-50mm • Drive profile: 19mm (removal), 22mm (height)

NEW

11 187

TECHNICAL TOOLS BALL JOINT

1 2

OM 0349 BALL JOINT PULLER 35mm

OM 0344 BENZ ACTROS PITMAN ARM PULLER 42mm

Suitable for Mercedes Sprinter and VW LT

Suitable for Mercedes Actros et Man 414

NEW

4 5 6 7

OM 2655 4 PIN BALL JOINT SOCKET MERCEDES M CLASS Suitable for front and rear ball joints on Mercedes M class W163 (>2005) Comes with installing nut

OM 9272 BRAKE DISC/PADS SPREADER TOOL Compatible with PSA, Renault, VW, Audi, BMW... Alignment guides Interchangeable tracking arrows

8 9 10 11 188

NEW

OM 2510 BALL JOINT PULLER SET Ø25 TO Ø34mm

Ø34 H,63mm Ø28 H,55mm Ø25 H,55mm

TECHNICAL TOOLS SILENT-BLOCK

OM 3615 10T BALL JOINT/SILENT-BLOCK REMOVER Max.

2 3

4 SA 3423 HYDRAULIC CYLINDER Max.

Compatible with OM2511/OM2512/OM9287

For OH 0327/OM 2511/OM 2513/OM 3423/OM 3615

OM 2518 ADAPTER FOR SPRINTER

6 OM 2511 BOTTOM HUB EXTRACTION RINGS RENAULT/OPEL

For OM 3615

8 For Renault Master and Opel Movano

OM 2512 TOP HUB EXTRACTION RINGS RENAULT/OPEL Compatible with workshop presses For OM 3615

For Renault Master and Opel Movano

9 10 11 189

TECHNICAL TOOLS SILENT-BLOCK OM 9388 SILENT-BLOCK UNIVERSAL EXTRACTION KIT

1 2

Composition: • 6 stepped end caps for cylinders: 34-36-38-4042-44-46-48-50-52-54-56-58-60-62-64-66-68-7072mm • 4 threaded rods Ø10-12-14-16mm • 2 bearing

NEW

Stepped end caps and numbered cylinders for easy identification.

5 6

Designation

SA 9289

THREADED ROD M10x1.5

SA 9290

THREADED ROD M12x1.5

SA 9291

THREADED ROD M14x1.5

SA 9292

THREADED ROD M16x1.5

OP 1480 8 PCES SPECIAL VIBRO CHISEL SET Chisel set for an easier removal of corroded, seized or crimped parts.

Content: • 1 pneumatic gun (capacity 2200bpm, operating pressure 5 to 8bar, consumption 114l/min, noice level 100dB) • 2 circular shaped blocks Ø74 and 38mm and 1 rounded hollow block Ø63mm + support • 2 hollow blocks Ø22mm • 1x1/2" D. block for impact sockets • O-rings

8 9

REF

OP 1482 STEERING KNUCKLE PINCH-BOLT DRIFT (WORKS WITH OP1480) For OP 1480

In addition to the vibro chisel set OP1480, this tool is made to work on front axle linkage.

10 11 190

Applications: • Audi: A4, A6, A8 • VW: Passat

OM 3617 SILENT-BLOCK FRONT PULLER (SEAT IBIZA/VW POLO/SKODA FABIA >2002)

OM 2508 REAR SILENT-BLOCK ASSEMBLY TOOL VW (2001-2004)

TECHNICAL TOOLS SILENT-BLOCK

Golf 4-A3- Bora

1 2

OM 3622 REAR SUSPENSION ARM SILENT-BLOCK EXTRACTOR LAGUNA II

OM 2509 REAR SILENT-BLOCK ASSEMBLY TOOL FIAT/LANCIA

4 Applications: • Fiat Stilo from 2001 to 2007 • Fiat Bravo: 2007 • Lancia Delta: 2008

Indispensable for setting up of silent-block on rear axle of Fiat/Lancia. Saving time: the operation can be made directly on vehicle. WARNING: this tool doesn’t extract the old silent-block.

OM 9380 SILENT-BLOCK EXTRACTOR MINI

OM 9382 FRONT SILENT-BLOCK EXTRACTOR VAG

This tool has been designed to remove the damaged silent-block and replace it by a new one.

5 6 7 8 9

OM 9372 REAR AXLE CARRIER BUSH TOOL FOR BMW X5

Model X5 E53 only. Essential to quickly remove bushing for axle rear directly on the vehicle.

11 191

TECHNICAL TOOLS SILENT-BLOCK

OM 9385 HYDRAULIC EXTRACTION SET Max.

1. CONTENTS

2 2. CHOICE OF EXTRACTOR WRENCHES

4 5 6 7 8

N°

Description

1 2 3 4 5 6

Hydraulic puller Extraction pin Adjustment nut Long sockets 110mm Short sockets 40mm Adaptator 3/8’’

3. EXTRACTION

(1) Hydraulic puller 18,2T (2) 4 pins Ø10mm Ø14mm

Ø12mm Ø16mm

Short and long nuts set 26 28 30 32 34 36 38 40 42 44 46

x x x x x x x x x x x

Øext. x Øint. (mm) 18 48 20 50 22 52 24 54 26 56 28 58 30 60 32 62 34 64 36 66 38 68

x x x x x x x x x x x

40 42 44 46 48 50 52 54 56 58 60

4. NEW SILENT-BLOCK INSRETION

SA 9384 HYDRAULIC CYLINDER REMOVAL 18T Max.

For OM 9384/OM 9385/OM 9386/SA 9382

Fig. 3 • Inverse the sockets and install the new silentbloc. • Secure the assembly with the adjustment nuts

OH 0014 AIR HYDRAULIC PUMP 10T 1/4" Max.

192

• 700bar • Aluminium reservoir • Internal load limiting

device • Exhaust muffler • Hose not included

Fig. 4 • Use the hydraulic pump: silentbloc is in place.

SA 0808 10T 1/4" HYDRAULIC HAND PUMP Max.

For OC 0801/OC 0802/OC 0703/OC 0705/OH 0010/OM 9385/OM 9387

Fig. 2 • Start the hydraulic unit to extract the Silentbloc in the long wrench

22 long sockets 22 short sockets

9 10

Fig.1 • Choose the correct size socket and extraction bolt • Connect the socket and bolt to the hydraulic extractor • Secure the assembly with the adjustment nuts

For OC 0802/OM 9385/SA 9384/SA 9382

Comes without hose

TECHNICAL TOOLS SILENT-BLOCK

OM 9386 HYDRAULIC PRESS TOOL SET Max.

Universal tool for silent-block, ball joint, sealing shaft.

This hydraulic press tool set allows a faster dissassembly and reinstallation; efficient, accurate for a safety work. No need to deposit chassis componment like suspension arm, undercarriage. You can work directly on the vahicle and save a lot of time on labour force. The OM 9386 set presents long (110mm) and short (40mm) bushes of different diameters (26 to 60mm) and also a 18T hydraulic cylinder who faciliates piece's extraction.

2 3

Composition: • press frame • hydraulic cylinder 18T with 3/8" adaptor • push spindle • fixing nut • 22 short bushes (40mm) • 22 long bushes (110mm) • plastic case • 1/4"-3/8" adaptor

Characteristics: • internal length (press frame): 290mm • internal width (press frame): 110mm • maximum load of press frame: 14T • maximum load of hydraulic cylinder: 18T

N°

Description

1 2 3 4 5 6 7

Hydraulic puller Extraction pin Press frame Adjustment nut Long sockets 110mm Short sockets 40mm Adaptator 3/8’’

4 5

(1) Hydraulic puller 18,2T Short and long nuts set 26 28 30 32 34 36 38 40 42 44 46

x x x x x x x x x x x

Øext. x Øint. (mm) 18 48 20 50 22 52 24 54 26 56 28 58 30 60 32 62 34 64 36 66 38 68

x x x x x x x x x x x

40 42 44 46 48 50 52 54 56 58 60

22 long sockets 22 short sockets

SA 9382 HYDRAULIC PUMP WITH FRAME AND SPINDLES Max.

For OM 2511/OM 2512/OM 2518/OM 9287/OM 9385/OM 9386/OM 9387

The hydraulic press enables extraction and setting up of silentblocs and hubs direcly on the vehicle without even removing the car frame. The cylinder must be coupled with manual pump SA0808 or hydropneumatic pump OH0014 and an hydraulic adaptater SA4215.

Fast and effortless

10 11 193

TECHNICAL TOOLS SILENT-BLOCK

OM 9387 EXTRACTION SOCKET SET For OM 9385/OM 9386

20 bigger extraction sockets.

L.110mm ØextxØint (mm)

L.40mm ØextxØint (mm)

70x62

72x64

74x66

76x68

78x70

80x72

82x74

84x76

86x78

88x80

5 6

OM 9384 18T HYDRAULIC EXTRACTOR Max.

For OM 3420/OM 3424/OM 3425/OM 3426/OM 3427/OM 3428/OM 3429/OM 3430/OM 9387/OM 3417

7 8

Easy, without strain

Hollow ram for extraction and replacement of silent-blocks, side shafts, crank shafts, wheel bearings. Composition: • SA9384: 18T hydraulic extraction ram • SA9385: Threaded rod M10x1.5 • SA9386: Threaded rod M12x1.5 • SA9387: Threaded rod M14x1.5 • SA9388: Threaded rod M16x1.5 • SA 4215: 1/4"-3/8" hydraulic adapter Options: • SA0808 : Manual pump • OH0014 : Hydropneumatic pump

9 10

OM 9370 SILENT-BLOCK STAB. BAR EXTRACTOR Ø70mm MERCEDES ACTROS For OM 9384/OM 9385 Use with OM9384/OM9385

11 194

TECHNICAL TOOLS DRIVE SHAFT

OM 3410 SLIDE HAMMER/PULLER SET 10 PIECES

1 2 Composition : • Hub extractor • Bearing extractor • 2 supports: 2 and 3 grips • 3 grips 90mm • 1x4-hole hub extractor, capacity Ø120mm

• 1x4-hole hub extractor, capacity Ø150mm • 1 inertial cup extractor • 1 screw centerer • 1 screw extractor • Mass 2.5kg • Axle 500mm

OM 9231 INERTIAL HUB PULLER

Inertial mass 3.5kg, thread M18x1.75 Supplier with universal plate for 3,4,5 holes

5 Tray Ø: 130x62mm

OM 9208 MULTI-BRAND HUB PULLER (LV & CV)

• • • • •

4 extraction screw M12x1.5 4 extraction screw M14x1.5 1 mechanical spindle Disc Ø90 to 170mm 4.3kg slide hammer

Covers most light vehicles & vans (Jumpy, Iveco, Boxer, Master, Trafic, Ducato, Sprinter, etc) Compatibility information on demand.

8 9 SA 9205 4 PCES WHEEL BOLT SYSTEM (MALE/FEMALE) M12x125

SA 9206 4 PCES WHEEL BOLT SYSTEM (MALE/MALE) M12x125

SA 9207 4 PCES WHEEL BOLT SYSTEM (MALE/FEMELLE) M12x150

For OM 9208

10 11 195

TECHNICAL TOOLS DRIVE SHAFT

OH 0327 CV JOINT HYDRAULIC PUSHER Max.

OH 0323 CV JOINT PUSHER

Do not use an impact wrench

Øplate : 150x74mm

Plate Ø: 130x62mm

Universal 3.4.5 hole plate, used with the vehicle studs.

Composition : • 1 hydraulic pressure bolt (8T force) • 1 mounting plate (3,4 and 5 hole wheels) • Lock washers

OH 5022 10T HYDRAULIC DRIVE SHAFT PULLER SET Max.

Use with 3,4 and 5 hole vehicle studs

7 8

OM 0648 THREAD TAPPING SET

Ideal for restoring damaged CV threads.

9 10 11 196

Composition: 24x1.50, 24x2.00, 22x1.50 3/4-20, 13/16-20, 20x1.25, 20x1.50

OM 9307 RETHREADING TOOL Ø17-Ø38mm (EXTERNAL)

TECHNICAL TOOLS DRIVE SHAFT

OM 3423 HYDRAULIC GEAR PULLER SET 10T Max.

Composition : • SA3423 :1 hydraulic spindle with 10T and centering pin • Various puller legs 100-150-200mm • Bearing separator up to Ø105mm • Various yokes 2 & 3 legs • Various extensions

2 3

OM 3450 UNIVERSAL WHEEL HUB EXTRACTOR NEW

Composition: • 1 thrust screw 370mm long with a 30mm hexagonal drive • 1 adjustable crosspiece up to 320mm wide • 2 threaded rods with retaining nuts • 2 thread adaptors M18xP1.5x65mm • 2 thread adaptors M20xP1.5x65mm • 2 thread adaptors M22xP1.5x65mm • 2 thread adaptors M24xP1.5x65mm • 2 thread adaptors M30xP1.5x65mm • 1 pressure plate Ø89mm-65x40mm • 1 pressure plate Ø110mm-89x40mm

6 7

OM 3411 SEPARATOR FOR DRIVE SHAFT JOINTS VAG

OM 3511 FRONT WHEEL DRIVE AXLE PULLER ADAPTER M18x1.5 NEW For use with slide hammer.

OM 0345 FRONT WHEEL HUB REMOVER MAN Ø166mm

8 9 10 11 197

TECHNICAL TOOLS DRIVE SHAFT

OM 0065 HUB WRENCH 12 SIDED Ø65mm IVECO DAILY/ FORD TRANSIT

OM 4024 REAR HUB BOLT REMOVAL WRENCH RENAULT/MASCOTT 3/4" D.

OM 5555 1" IMPACT HEX. SOCKET Ø55mm

NEW

4 5

OM 0046 SPANNER 3/4" D. Ø33mm FOR WHEEL NUT MAN

OM 0056 CV JOINT WRENCH 12 SIDED 1/2"D. Ø36mm VAG

OM 0055 CV JOINT WRENCH 12 SIDED 1/2"D. Ø35mm

6 7 8 9

OM 0024 CV JOINT WRENCH 12 SIDED 1/2" D. Ø24mm VAG

OM 7146 46mm SOCKET 1/2" D. 100mm

Square: 1/2" D. Lenght: 100mm Size: 46mm Impact molybdene chrome

10 11 198

This 100mm bi-Hex long socket can loose and tight drive shaft nuts on Citroën Jumper, Peugeot Boxer, Fiat Ducato and Renault Master and Opel Movano freom 2010.

OM 0068 CAP XZN M18 1/2" FPR FRONT REAR HUB VAG

TECHNICAL TOOLS DRIVE SHAFT

1 2

OM 9264 4 PCS SPLINE1/2" XZN BIT SET 12-14-16-18mm

Use on VAG and others

5 OM 7049 6 PCES 1/2" D. DRIVE SHAFT SOCKET VAG

6 7

Content: • 30mm Bi-Hex socket • 32mm Bi-Hex socket • 36mm Bi-Hex socket

• 14mm Hex socket • 17mm Hex socket • 19mm Hex socket

OM 7039 1/2" D. CV JOINT WRENCH SET Ø30-Ø32Ø34-Ø35-Ø36mm 12-SIDED 85mm

8 9 10 11 199

TECHNICAL TOOLS DRIVE SHAFT 800mm

OM 4227 WRENCH XZN 8 Long 800mm FOR CV JOINTS VW

2 3

4 5

OM 0131 CV BOOT CLAMP INSTALLER TOOL

OM 9395 CV BOOT CLAMP PLIER

NEW For OM 0130

3/8" D.

Provides quick and effortless installation

OM 3411 SEPARATOR FOR DRIVE SHAFT JOINTS VAG

6 7

Racheting clamping system Built on cutter

OM 0130 STEEL BANDS (10PCS) For OM 0131

NEW

8 9 10 11 200

OM 4228 WRENCH XZN 10 Long 800mm FOR CV JOINTS VW

OM 0808 SET OF CHISELS These tools are designed to remove nuts with no damage on the threads. Often used for LV and HGV hubs, they are also usefull for the nuts installation.

Content: • 1 chisel for nuts installationl

• 1 chisel for nuts removal

TECHNICAL TOOLS DRIVE SHAFT

OP 0620 CV JOINT GAITER EXPANDER

easier-faster-cleaner. No more need to rEMOVE the CV joint, saves time. Effortless. The expander opens the adjustable universal gaiter.

2 Capacity 20 to 115mm Powered by compressed air 1/4"

OM 8095 FRONT END EXERCISE LEVER

extensible Lever made up of: • 1 arm + pad for support under the body • 1 articulated traction arm • 1 traction screw

250mm

5 Max 60° Operation: By putting it under the car body, the lever allows traction of the control arm and/or the hub to extract the shock absorber tension strut and take out the lower ball joint.

Advantages: A single operator is sufficient Saves time & increases productivity Holds the control arm and hub in the low position during the intervention (e.g: replacing U-joint bellows, shock absorbers, a low ball joint, etc.)

6 7 8 9 10 11 201

TECHNICAL TOOLS SHOCK ABSORBER

OP 2030 PNEUMATIC COMPRESSOR CERTIFIED VERITAS Max.

1.2

Machine highlights: - Optimal ergonomy - Simple to use - Increased productivity - Operator safety - Evolving accessories

2 3

Technical characteristics: • Height: 1400mm • Base: Length: 650mm Width: 400mm • Working pressure: 6bar/max. 8bar • Compression strength 1226Kg • Use and maintenance instruction book. • Blue • Weight 62Kg • Allocation: 1 GM cup Ø125 to 205mm 1 GM cup Ø78 to 130mm • Standards 2006/42CE

4 5 6

Equipped with an air supply contact breaker at the opening of the grid.

7 8 Fall arrest support

9 COMPLIES WITH MACHINE DIRECTIVE 2006/42CE

10 11 202

TECHNICAL TOOLS SHOCK ABSORBER OP 3220 REINFORCED PNEUMATIC SPRING COMPRESSOR (2.4T) Max.

2.4

2 • Height: 1600mm • Base Length: 500mm Width: 300mm • Working pressure 6bar/max 10bar Compression strength 2452kg • Use and maintenance instruction book. • Grey • Weight 70kg • Allocation: 1 GM cup Ø125 to 205mm 1 GM cup Ø78 to 130mm • Standards 2006/42CE • Technical data on request

4 5 6

Equipped with an air supply contact breaker at the opening of the grid.

7 8 9

Fall protection

- Pan support with double positioning to increase working stroke - Increased security at the grid opening thanks to the new spring system - Safety valve to stop machine at the opening of grid - Protective ring

10 11 203

TECHNICAL TOOLS SHOCK ABSORBER

OP 2004 CUP QASHQAI KOLEOS

OP 2006 RED JAWS HONDA-TOYOTA

For OP 2000/OP 2002/OM 2010/OP 2220/OP 3220

For OP 2002/OM 2010/OM 2030/OP 2220/OP 3220

OP 2008 CUP MERCEDES ACE/NEW RENAULT MEGANE

4 5 6

For OP 2002/OM 2010/OM 2030/OP 2220/OP 3220

OP 2009 CUP NEW RENAULT MEGANE/C3/STYLO For OP 2002/OM 2010/OM 2030/OP 2220/OP 3220

OP 2005 PROTECTIVE GRID

OP 2010 COMPRESSED STRUT CLAMP.

For OP 2002/OM 2010/OM 2030/OP 2220/OP 3220

7 8

OP 2022 300mm RISER For OP 2000/OP 2002/OM 2010

9 10 11 204

OM 0764 TORQUE WRENCH WITH INTERCHANGEABLE HEADS 3/8" D. 19-110Nm L.410mm

10-11-12-13-14-15-16-17-18-19mm

Delivered with calibration certificate

OM 1112 SHOCK ABSORBER HEAD REMOVAL KIT

TECHNICAL TOOLS SHOCK ABSORBER

This kit is specially designed for installing and removing shock absorber heads. Its go-through socket wrench lets you release or tighten the top cup nut while holding the damper piston steady to prevent it turning.

Contents: • 1 go-through socket wrench • 7 spanners Ø16 to 24mm • 3 hexagonal male bits 6, 7 and 8mm • 3 hexagonal female bits 7, 8 and 9mm • 3 slotted spanners 5x8-6x8-7.1x9.6

1 2 3

OM 8046 8 SOCKETS SHOCK ABSORBER HEAD REMOVAL KIT

This kit allows installation and disassembly of specifics shocks absorbers.

Composition: • 10.5mm socket, pin 3.5mm, 22mm Hex drive • 12.5mm socket, pin 3.5mm, 22mm Hex drive • 14.5mm socket, pin 5mm, 22mm Hex drive • 14mm socket, pin 2.5mm, 22mm Hex drive • 21mm socket, pin 5mm, 21mm Hex drive

• 12.5mm socket, pin 3mm, 15mm Hex drive • Head spreader socket L.22mm, 5x7mm, 1/2" drive • Head spreader socket L.15.5mm, 5.5x8mm, 1/2" drive

6 7

OM 1140 SPECIAL KIT FOR MOUNTING SHOCK ABSORBERS WITH SPRING STOP BUFFER Special kit for mounting shock absorbers with stop buffers.

For the replacement of the latest-generation gaspressure springs which requires the rod is deployed.

Easy to use: • Install the clamp with the fixing screws • Screw the stem puller in the support by positioning the unit on the shock absorber and fix the stem of the cylinder with the locking nut • Extract the stem puller and lock it with a light rotation • In case the buffer has not come out completely after this first step, it is possible to extract the stem by another 20mm by keeping the handle still and rotating the stem puller • Then, lock the clamp with the appropriate screws • After having assembled the shock absorber, unscrew the two screws to remove the vice

8 9 10 11 205

TECHNICAL TOOLS SHOCK ABSORBER

OM 0393 REAR WHEEL SHOCK ABSORBER SOCKET SCANIA OUTER Ø56mm

OM 0392 FRONT WHEEL SHOCK ABSORBER SOCKET SCANIA INNER Ø28mm

NEW

OM 0394 REAR WHEEL SHOCK ABSORBER SOCKET SCANIA OUTER Ø46mm

OM 0395 REAR WHEEL SHOCK ABSORBER SOCKET VOLVO

NEW

4 5

OM 1130 SPRING COMPRESSOR

Applications: Mercedes, GM, Peugeot, Rover, Hyundai, Saab, Volvo, Volkswagen, Fiat, Mazda, Toyota, Nissan, Mitsubishi

OM 1170 COIL SPRING COMPRESSOR SET 1 T Do not use an

Spring compressor for "MCPHERSON" type struts, with interchangeable cups.

Max.

7 8

impact wrench Contents: • Capacity 1050kg/10200Nm compressor • Max opening of cups 310mm, closure 110mm • 3 different cups with protection: Ø65-152mm, 88mm-160mm, 126mm-212mm • Cup extender • Tools for cups replacement (screw, allen key)

9 10 11 206

OM 0623 4 PCES NUT SPLITTER Content: • 1 nut splitter • 1 nut splitter • 1 nut splitter • 1 nut splitter

for for for for

nuts nuts nuts nuts

from from from from

This set allows the operator to quickly remove corroded, seized or damaged nuts. The principle is simple: the nut is sheared to release the screw thread. Fast, sure and safe; this nut splitter set is a must-have in every workshop.

9 à 12mm, 14mm opening, 76mm lenght 12 à 16mm, 20mm opening, 93mm lenght 16 à 24mm, 30mm opening, 124mm lenght 22 à 27mm, 38mm opening, 150mm lenght

TECHNICAL TOOLS SHOCK ABSORBER

OM 1100 SPRING COMPRESSOR 1500kg T

This suspension spring compressor is suitable for passenger cars and vans. Its robust design and construction lets you clamp it in a vice for easy working and can be used with an impact wrench. The coating on its compression cups protects the springs, and safety pins prevent slippage.

2 cups Citroën C15 Cups N° VIII/IX in instruction manual

For OM 1100

OM 1102 CUP VOYAGER, R21, RAV4 Ø180-235mm

Contents: • 1 spring compressor 1500kg • 2 pairs of cups Ø80-145mm and 145-195mm

TUV certified

500mm

1.5

65 à 360mm

Max.

OM 1101 2 CUPS CITROEN C15

For OM 1100

OM 1103 2 CUPS Ø80/120mm For OM 1100

2 cups 80-120mm Alfa 156, Audi A4, BMW 5, Ford Escort, Ford Fiesta, Honda Civic Cup N° II in instruction manual

OM 1104 CONICAL SPRING CUP For OM 1100

OM 1108 CUP MERCEDES CLASSE C

1 cup Ø180-235mm Chrysler Voyager, R21, RAV 4, commercial vehicle ... Cup N° VII in instruction manual

1 cup Ø80-145mm Conical spring. Audi A4, Audi A6, Citroën Evasion, Opel Zafira, Opel Corsa Cup N°X in instruction manual

OM 1105 CUP BMW

1 cup Ø90-165mm for MERCEDES CLASSE C

1 cup for BMW Series 3, 5, 7 Cup N° XI in instruction manual

For OM 1100

OM 1109 CUP MEGANE 2 AND MERCEDES CLASSE E

OM 1107 CUP PEUGEOT 206

For OM 1100

1 cup Ø155-215mm for RENAULT MEGANE 2 & MERCEDES CLASSE E

OM 3637 PAIR OF SPRING COMPRESSORS

Supplied with: • 2 long shafts: 315mm • 2 medium shafts: 215mm • 2 short shafts: 175mm

For OM 1100

1 cup Ø140-175mm for Peugeot 206 Cup N° IV in instruction manual

1 2 3

4 5 6 7 8 9 10 11 207

TECHNICAL TOOLS BRAKING

AC 5006 BRAKE FLUID TESTER

AC 5004 BRAKE FLUID TESTER PROBE Lets you read the humidity level and quality of brake fluid

Lets you read the humidity level and quality of brake fluid Dot 3-4-5

2 Dot 3-4-5

4 5

Device powered via 2 clips connected to the car battery, supplied with its accessories. Lets you accurately check the boiling point in 째C/째F of the DOT fluid. Approved by many car-makers.

AC 5023 PRINTER FOR AC5022 TESTER

SA 1025 SET OF 4 ROLLS PRINTING PAPER For AC 5023

4 rolls paper for AC5023

AC 5014 BRAKE & ABS PRESSURE GAUGE SET

9 10 11 208

AC 5021 BRAKE FLUID + BOILING POINT TESTER

AC 5022 BRAKE FLUID + BOILING POINT TESTER + PRINTER ADAPTER

This set of brake pressure gauges includes 2 pressure gauges, which connect directly in place of the bleed screw or connection specified by the manufacturer, and diagnose the brake system (including ABS system).

TECHNICAL TOOLS BRAKING

OP 0501 BRAKE BLEEDER VACUUM KIT 800

Lets you empty the brake fluid reservoir and bleed the brake lines.

Vacuum kit capacity 800ml Powered by compressed air

OP 0053 PNEUMATIC VACUUM BRAKE BLEEDER 1

Lets you empty the brake fluid reservoir and bleed the brake lines.

Used to vacuum out impurities: injector wells, plug wells, etc.

SA 8201 6 BLEEDING NIPPLES For HU 1003/HU 1004/OP 0051

HU 0550 METAL PRESSURE AND VACUUM PUMP (-1/+ 4bar)

Bleed screw adapter

6 7 8

To test: advance vacuum curve pressure regulator for fuel, LPG, EGR valve (exhaust fumes) TURBO... delivered in a composite case SA 8071: 360Â° rotating pressure gauge

9 10 11 209

TECHNICAL TOOLS BRAKING

1 2 3

HU 1109 PNEUMATIC BRAKE AND CLUTCH BLEEDER 5

For bleeding brakes and hydraulic clutches of all vehicles, can also bleed vehicles equipped with load-sensitive brake control and ABS (max. 1bar). • • • • • • • • •

Pneumatic operation Comes with antifoaming rubber membrane Air reserve in the bottom part of the tank 5-litre capacity allows it to be used repeatedly Fast-connector hose Balanced carrying handle Pressure control gauge Plug rack Compatible with DOT3/ DOT4/DOT5/DOT6 /Pentosin/LHM/LHS

Supplied with: • 5 metal plugs • 2 brake oil recovery jerricans

4 5

HU 1110 PNEUMATIC BRAKE AND CLUTCH BLEEDER HGV 5

• • • • • • • • •

6 7

Supplied with: • 8 plugs (Ø33.5-44.5-45-48-52.5-58.5-64mm) covering: Fiat, Iveco, Mercedes, Renault, Saviem, Scania, Volvo, Ford, etc. no universal plug • 2 brake oil recovery jerrycans

8 9 10 11 210

SA 8113 2 BRAKE OIL RECOVERY JERRYCANS

HU 0501 UNIVERSAL PLUG FOR BRAKE BLEEDERS

For HU 1003/HU 1004/HU 1005/HU 1105

Ø20mm-Ø28mm-Ø45mm

SA 8210 METAL PLUGS SET (5PCS) For HU 1003/HU 1004/HU 1005/HU 1105

Ø43-48-52.5-59-64mm

TECHNICAL TOOLS BRAKING

HU 1005 ELECTRIC BRAKE BLEEDER 6bar 5

• • • • • • • • • • • •

230V power supply (3m lead) Comes with M/A switch Has a pressure regulator that keeps fluid continuously pressurized Pressure gauge (0 to 6bar) Suitable for clutches and ABS brakes 5-litre capacity allows it to be used repeatedly Interchangeable canister: compatible with DOT3/ DOT4/DOT5/ DOT6 /Pentosin/LHM/LHS fluid (fast change) Fast connection hose (L.4m) Comes with 5 metal plugs SA8110 tourism 2 used-fluid recovery canisters SA8113 Polyethylene housing Mounted on wheels, compact and practical

Has a pressure regulator that keeps fluid continuously pressurized

1 2

• User-guide video available • Dimensions: 0.32x0.32x1.05m • Weight: 13kg

4 5 Comes with metal plugs tourism Ø43-48-52.5-59-64mm

6 7

HU 1105 ELECTRIC BRAKE BLEEDER 12V 4bar 5

4 Has a pressure regulator that keeps fluid continuously pressurized

• • • • • • • • • • • • • • •

12V power supply (4m lead) Comes with M/A switch Has a pressure regulator that keeps fluid continuously pressurized Pressure gauge (0 to 4bar) Suitable for clutches and ABS brakes 5-litre capacity allows it to be used repeatedly Automatic 5 liter tank filling and stop with compatibility with DOT3/ DOT4/DOT5 Fast connection hose (L.4m) Comes with 1 standard tourism plug Ø43mm Comes with 1 used-fluid recovery canister Chromed metal housing Mounted on wheels, compact and practical 2 year warranty Dimensions: 630x290x330mm Weight: 12.8kg

8 9 10

Option: 5 plugs kit SA8210 Ø43-48-53-59-64mm

11 211

TECHNICAL TOOLS BRAKING

Complete brake caliper tool kit for wind back and push back systems. The operating pressure is from 5 to 8bar

OP 4505 23 PCS PNEUMATIC BRAKE CALIPER REWIND SET

Max.

150

2 3

4 5

For left or right handed threaded pistons This kit includes a pneumatic gun, the traditional adaptors and all the latest adaptors for: • VW Passat (from 2005) • Ford • Iveco Daily • BMW • Mini/BMW • Renault Laguna III/ Scénic III • Renault Master III

6 7 8

SA 3510 IVECO BRAKE ADAPTOR

SA 3511 PISTON PUSHER INSERT RENAULT LAGUNA III/SCENIC III

2 pins drive 2 pins drive

OM 4514 3 ADJUSTABLE BRAKE CALIPER REWIND ADAPTORS 2-3 PIN NEW

Composition: • 2 pin adjustable brake caliper • 3 pin adjustable brake caliper used with electronic park break (EPB) • 3/8" adapter with 2 pin

9 10 11 212

For the majority of the park (Audi, BMW, Iveco Daily, Renault, Range Rover, Seat, Volkswagen, Volvo)

SA 3512 PISTON PUSHER INSERT VAG 2 pins drive

SA 3514 MULTI DRIVE BRAKE ADAPTOR • 2 pins drives • Universal applications

TECHNICAL TOOLS BRAKING

OM 8055 26PCS BRAKE PISTON PUSHER SET

Applications: • Alfa Romeo 155 1.8-2.01, 164TD(93), 164 3.0 V6(91), 164 2.0 1, 164 2.0 Twin Spark 2.0 Turbo (8-), 3.0 V6 • Audi 80, 90, A3, A4, A6, A8 (rear callipers), A3, A4, A6, A8, S8 • BMW Most models including Mini • Citroën Most models • Fiat Tipo TD, Uno, Stilo • Ford Sierra (ABS arrière), Escort, Mondeo V6 24V, Mondeo • Honda Most models • Jaguar • Mitsubishi Most models • Nissan Most models • Opel AstraC Zafira (with Bosch rear callipers), Opel AstraG, CorsaC, Zafira (with Lucas rear callipers TRW'02), Vectra • Peugeot 206, 306, 309, 406, 806 • Renault Most models and Master, Modus • Rover Most models • Saab 9000 • Seat • Subaru • Toyota Most models • Volkswagen Most models • Volvo Most models and similar assemblies

2 3

4 For left or right handed threaded pistons

OM 8054 18 PCS PISTON PUSHER SET Suitable for: • 1 >Général Motors. • 2 >Citroën Xantia u.a. • 3 >Alfa Romeo, Audi, Austin, BMW, Ford, Honda, Jaguar, Mercedes-Benz, Mitsubishi, Nissan, Rover, Toyota, VW. • 4 >Alfa Romeo 164 2.0, Ford, Mazda, Saab 9000, Subaru. • 5 >Adapter 3/8. • 6 >Nissan Primera, VW Golf IV. • 7 >Audi 80 /90/V8/100, Ford Sierra ABS/Scorpio AB85, Honda Prelude, Nissan Silva 1.8T, Rover 8000, Saab 9000, Subaru L+Z, VW Golf+Passat. • 8 >General Motors. • 9 >General Motors. • G >Opel Astra. • Z >Renault. • M>Ford. • N >Saab, Honda. • K >Citroën. • E >Nissan Maxima.

For left or right handed threaded pistons

6 7 8 9

OM 8056 DOUBLE BRAKE PISTON PUSHER • Width: 90mm • Height: 120mm • Max opening: 95mm

11 213

TECHNICAL TOOLS BRAKING

SA 8047 PUNCH + DIE SET 8mm

OM 8045 BRAKE PIPE FLARING TOOL SET Ø4.75mm-Ø6mm

For OM 8045

SA 8048 PUNCH + DIE SET 10mm

For OM 8045

SA 8049 PUNCH + DIE SET 12mm

4 5 6 7 8 9

For OM 8045

SAE : male cone DIN : female cone

OM 8047 DIN/SAE BRAKE LINE REPAIR KIT This tool lets you reshape brake line collets. It produces single or double SAE or DIN shapes on 4.75mm, 5mm or 6mm lines.

SAE : male cone DIN : female cone

No need to remove the line

OM 8050 FLARING TOOL KIT 10 PIECES • Adapters: Ø3/16" (4,75mm)-5/8"-1/2"7/16"-3/8"-5/16"-1/4" • Tube cutter Ø3 to 30mm

SA 5323 3/16" ADAPTER

10 11 214

For OM 8050

SAE : male cone DIN : female cone

OM 8057 MANUAL BRAKE LINE BENDER Ø3-4-6mm

OM 8090 MINI TUBECUTTER Ø3-22mm

TECHNICAL TOOLS BRAKING

1 2

OM 5032 KIT WITH CLAMPS + PLUGS FOR LINES – HOSES – BANJO CONNECTORS

4 Contents: • 2 hose clamps : lock Ø7.94mm • 2 clamps for BANJO connectors • 1 hose clamp : Ømax 26mm • 6 conical plugs: Ø4 to 9mm

5 6

EG 0565 COPPER CROWN Ø4.75mm L.7.62m

7.62

8 EG 0007 ASSORTED POPULAR BRAKE NUT FITTINGS BOX 135 PCS Composition: • SA0771: Brake lines connectors M10x1 Ø4,75mm collar turned L. 16mm 50 pcs • SA0772: Brake lines nuts M10x1 Ø4,75mm 15 pcs • SA0773: Brake lines connectors M10x1 Ø4,75mm L. 16mm 20pcs • SA0774: Brake lines connectors M10x1 Ø4,75mm collar turned L. 22mm 20pcs • SA0775: Brake lines nuts UNF3/8 " Ø4,75mm 10 pcs • SA0776: brake lines connectors UNF 3/8" Ø4,75mm collar turned L.20mm

9 10 11 215

TECHNICAL TOOLS BRAKING

1 2 3

OM 0669 16 PIECES IMPACT SCREWDRIVER Bits : • Flat 5-6-8-10-12mm • Hex 4-5-6-8mm • Philips 1-2-3-4 • Torx 40 (SA0656) + adapter

OP 1428 MINI ORBITAL SANDER KIT Ø50-75mm Characteristics: • Speed: 15.000rpm • Pad size: 75mm • Spindle thread: M6x100 • Air consumption: 170l/min • Lenght: 108mm • Weight: 640g

4 5 6

OM 8023 BRAKE SPRING TOOL Keeps the handbrake cable spring compressed to make the cable easy to attach to the brake lining.

Easily compresses spring cups when replacing rear brake linings. The striated cone ensures that the cup is held securely for locking.

7 8 9 10 11 216

OM 8022 SPRING COMPRESSION TOOL

OM 8025 BRAKE SPRING PLIERS The offset allows access to the brake lining fixing cups when they are hidden behind the hub.

OM 8052 BRAKE LINING PLIERS L.330mm

OM 8053 HANDBRAKE CABLE PLIER

TECHNICAL TOOLS BRAKING

OM 0358 BRAKE PLIERS PL 670mm OPENING 200mm

OM 0357 BRAKE PLIERS PL 520mm OPENING 210mm

OM 0124 180° TILT BRAKE LINE WRENCH SET

Can be fixed to brake hoses in order to reach the nut and uses a ratchet movement for a quick and easy work. The unique geometry allows working on rounded and worn nuts, as well as a tighter clamp on rusted nuts. This tool enables you to bear on the 6 sides of the brake hoses. The sides of the key can be tilted up to 1808, which allows getting the nuts in the most difficult places to reach. The more the user pushes, the more the nut is compressed for an effective loosening/tightening.

4 Contents: • 1 key 8x9mm: L.123xl.14.8xthickness 8.5mm, 0.056kg • 1 key 10x11mm: L.156xl.18.35xthickness 10mm, 0.116kg • 1 key 12x13mm: L.179xl.21.1xthickness 11.22mm, 0.170kg • 1 key 14x15mm: L.208xl.24.55xthickness 12.10mm, 0.240kg

5 6 7

Ø4 to 16mm

OM 0220 VICE GRIP 200mm

Ø8 to 20mm

For adjusting brake caliper

2 3

OM 0215 VICE GRIP 150mm

OM 4526 TORX SOCKET FEMALE E20-E24 1" FOR BRAKE CALIPER MAN

OM 9273 SET OF 3 PENTAGONAL WRENCHES

• 1 wrench Ø19mm Bendix, PSA, Renault • 1 wrench Ø14mm Smart, Opel • 1 hex wrench Ø10mm Girling

10 11 217

TECHNICAL TOOLS BRAKING

1 2

AC 0515 MAGNETIC BASE FOR COMPARATORS • • • • •

Joints locking Magnetic base, attraction strength 80kg Height : 235mm Vertical stalk Ø12mm Weight : 1,850kg

4 5 6 7 8 9

AC 0514 COMPARATOR 0-10mm Characteristics: • Mesure range 0 to 10mm • Travel/turn : 1mm • Resolution 0.01mm • Chromed-steel case Ø57mm • Fixing rod Ø8mm • Point Zero locking screw • Delivered with calibration certificate

AC 0517 EXTERNAL MICROMETER 0-25mm

Characteristics: • Tempered steel touch • Metal contact area • Chrome-plated body matt, antireflection • Locking by lever

AC 0522 GAUGE FOR BRAKE DISC

10 Measuring range: 0 to 60mm

11 218

Metric scale: 1/10mm graduations

Calibration certificate

TECHNICAL TOOLS BRAKING

AC 0519 BRAKE DRUM WEAR GAUGE • • • •

Size range 160mm-400mm Fits a larger range than most similar products on the market Selected steel Imperial and metric measurement scale

2 3

OM 0502 ADJUSTABLE REAMER FOR BRAKES

Adjustable 20 to 70mm

SA 5502 SET OF 3 STONES 3 stones 26x5mm

3x30mm stones

For OM 0502

Grit 240 medium

4 5 6

OM 3776 GLOWPLUG REPAIR KIT Ø9 FORD/VAG/OPEL

7 OM 8020 ABS SENSOR HOUSING CLEANER Contents: • 1 reamer • 1 reamer • 1 reamer • 1 reamer • 1 reamer

support Ø1/4" Ø18x42mm Ø18x31mm Ø15x33mm Ø14x43mm

8 This set of reamers lets you clean corroded ABS/ ESP wells or if the sensor is broken.

9 10 11 219

TECHNICAL TOOLS CLEANING

OP 0022 CLEANING GUN 1000

2 3

• Cleans bodywork, wheels, dashboard, air vents, engine... and door jambs • Ultra-low consumption thanks to special vortex technology • Its vortex propulsion system gives it unbeatable results.

SA 6032 FULL ROTARY NOZZLE

1000

For OP 0022

SA 6036 GASKET KIT

SA 6037 CONE

For OP 0022

5 6 7 8 9

11 220

SA 6022 CLEANING SOLUTION 2

For OP 0022 2L can. To mix with water (25%).

For OP 0022

OP 0024 CLEANING GUN EVOLUTION 1000

Use it on seats, air vents, gear shift, wheels, etc.

Encapsulated ball bearing Its 1L tank lets you use it without interruption. Weight 840g when empty. Easy to carry and small. Suitable with pure water or universal cleaner

SA 6072 TEFLON ROTATIVE NOZZLE

SA 6075 ALUMINIUM NOZZLE

For OP 0024

SA 6073 JOINT REPAIR KIT

SA 6071 BOWL

NEW

SA 6074 BEARINGS+BLADES REPAIR KIT For OP 0024

1000

For OP 0024

SA 6033 BOWL AND CAP FOR CLEANING GUN

OP 0044 PRO SPRAY GUN 1000

For OP 0024

• • • • •

2 adjustable jets and air flow Nozzle L.300mm Nozzle Ø2mm Connector 1/4" Service pressure: 2 to 8bar

TECHNICAL TOOLS CLEANING

EG 3521 MOBILE PARTS WASHER 9

Suitcase format, waterproof and transportable

Characteristics: • Power switch • Filter • Dimensions: 460x660x260mm • Weight: 5kg

SA 3521 PUMP

SA 6819 BRUSHHEAD FOR BRUSH SYSTEM

For OP 3521/EG 3521

For EG 3521

OP 0615 HIGH-FLOW SANDING GUN (ceramic nozzle)

4 5 SA 6616 CERAMIC NOZZLE

3 For OP 0615

Pneumatic sandblaster with ceramic nozzle • • • •

For high-flow sandblasters (nozzle Ø5mm)

Extraction hose 3m Service pressure: 6 to 8bar Air consumption: 500L/min To be used with sand drum SA6615

6 7 8

OP 0617 HIGH-FLOW SANDING GUN (metal nozzle) 1.2 • Air consumption : 750L/min • Working pressure : 8bar • Hose length : 1.2m

SA 6615 DRUM OF SYNTHERIC SAND 30kg

SA0617: Metal nozzle

9 10

For OP 0615/OP 0617/OP 0618 Synthetic sand 0.5 to 1mm grain (corundum type)

11 221

TECHNICAL TOOLS WHEEL

1 2 3

OM 7016 SPECIFIC SOCKET FOR MERCEDES WHEEL STUD This 17mm convex socket will prevent damages to wheel nuts (original equipment on Mercedes Benz 221, Class S and CL). OEM code : 000 990 5407

OM 9310 WHEEL STUD REFURBISHMENT TOOL 1- Select the right threader for the diameter and thread of the stud to be refurbished 2- Run the threader to the bottom of the stud 3- Remove the threader with the wrench

Composition: • 1 threading wrench • 1 adjustable threader M12x1.25 • 1 adjustable threader M12x1.5 • 1 adjustable threader M12x1.25

5 6 7 8 9 10 11 222

Square: 1/2"D Lenght: 45mm Size: 17mm Impacting Vanadium chrome

OP 1512 MINI IMPACT WRENCH 1/2" 678Nm

Short lenght of 120mm

NEW Characteristics: Maximum torque: 678Nm Spinning speed: 11000rpm Vibration: 10m/s Sound level: 90dB Connection: 1/4" Suggested hose Ø: 10mm Pressure: 6bar Consumption: 113l/min Net weight: 1.58kg

Delivered with calibration certificate

OM 0765 120Nm PRESET 1/2" TORQUE WRENCH

OM 0761 TORQUE WRENCH 1/2" D. 40-210Nm 540mm

Comes with calibration test report DIN ISO standard: 6789

• Release accuracy ± 4% • Weight: 825g • Lenght: 375mm

TECHNICAL TOOLS WHEEL

These boxes allow you to extract damaged bolts and remove the wheel anti-theft system. The "twisted" shape provides the necessary grip for loosening.

OM 0608 IMPACT TWISTED SOCKET SET FOR DAMAGED NUTS Ø17-Ø27mm

OM 8073 IMPACT TWISTED SOCKET SET FOR DAMAGED NUTS Ø6-Ø27mm

1 2

• Sockets: 17-19-21-23-27mm • 1/2" D.

Composition: • Punch: Ø4, Ø6, Ø8 and Ø12mm • Ø6 -8-10-11-12mm, 1/4"D. • Ø13-14-15-17-19-21-24-27mm, 1/2"D.

OM 9075 TWISTED IMPACT SOCKETS DAMAGED NUTS HGV Ø22-Ø41mm

Composition: • 4x1/2" drive sleeves Ø22-Ø24-Ø27-Ø32mm • 2x3/4" drive sleeves Ø36-Ø41mm

OM 0630 INVERTED THREAD IMPACT SOCKET SET FOR DAMAGED BOLTS

6 This wheel lock remover set can remove the damaged nuts and bolts very easily. Efficient, easy to use, convenient for bolts and nuts. Thanks to its conical and helical shape, socket grips the nuts. Very resistant steel and wheel locking system with inverted rethreading. Wide range of applications: Allan pan screws, drain plugs and safety wheel nuts.

Characteristics: • 17mm socket • 18.5mm socket • 20mm socket • 21.5mm socket

OM 7003 SET OF 3 IMPACT SOCKETS FOR ALU RIMS 3 impact sockets sheathed to avoid rim damage

• • • • •

Wider griping area unlike previous sockets, easier extraction.

23mm socket 24.5mm socket 26mm socket 1/2" D. Length: 38mm

OM 7022 WHEEL NUT CAP REMOVER TOOL

7 8 9

NEW Provides quick and easy removal of the wheel nut caps.

Dimensions : 17-19-21mm Recuperator in the handle to store up to 6 wheel nut caps.

11 223

TECHNICAL TOOLS WHEEL

1” Ø 130

OM 0342 1" D. HEX REAR HUB SOCKET IRISBUS/VOLVO Ø105mm

105 80

53 1” Ø 130

OM 0300 6 PIN REAR HUB SOCKETS MAN AUTOBUS Ø110mm

Ø 120

Ø 110

Ø 120

OM 0310 RECTANGULAR HUB SOCKET FOR SETRA-BUS/NEOPLANBUS 54X68mm

68 49

1”

49.5

1”

OM 0313 RECTANGULAR HUB SOCKET MAN/MERCEDES 60x76mm

76 49.5

1”

Ø 68

1”

Ø 68

1”

10 11 224

OM 0312 RECTANGULAR HUB SOCKET FOR KASSBOHRER/SETRA/DAF/ MERCEDES 56x71mm

1”

71 49

1”

TECHNICAL TOOLS WHEEL

OM 0350 HEXAGONAL SOCKET FOR MERCEDES/ EVOBUS DIFFERENTIAL NUTS Ø72mm

1 NEW

Suitable for Mercedes Citaro et EvoBus, ZF axle 132

2 3

OM 0354 HEXAGONAL SOCKET FOR REAR AXLE NUT MERCEDES CITARO Ø123.5mm

NEW

Ø 72

3/4”

OM 0352 MAN TRANSMISSION SOCKET Ø53.5mm

Ø 53,5 75

3/4” Ø 72

NEW

7 OM 0353 MAN/MERCEDES DIFFERENCIAL REAR NUT SOCKET Ø101mm

8,7 3/4”

NEW

Ø 113

NEW Suitable for Scania 310, 320

Ø 63/64

65 3/4” Ø 70

OM 0351 SCANIA TRANSMISSION SOCKET Ø63-64mm

Ø 70

3/4”

11 225

TECHNICAL TOOLS WHEEL

4 5 6 7 8

OM 0341 HEX HUB SOCKET IVECO Ø90mm 1" D.

23 1”

Suitable for Iveco Cargo HA>98

OM 0382 IVECO AXLE NUT SOCKET 98mm NEW Suitable for Iveco Eurocargo

OM 0383 AXLE NUT SOCKET IVECO 110mm

NEW

Suitable for IVECO Eurotech Cursor HA.

OM 0319 6 PIN FRONT HUB SOCKET MAN Ø76.5mm

3/4”

Ø 76,5 3/4”

Suitable for front axles M3, ME, MI and for rear axles 3MR, 5MR

100

OM 0318 6 PIN FRONT HUB SOCKET MAN Ø77mm

1” Ø 84

Ø 77 100

226

Ø 84

1”

Ø 87

1”

Ø 87

Suitable for front axles VW2, 4, 6.1 and 6.8

TECHNICAL TOOLS WHEEL

OM 0306 6 PIN FRONT HUB SOCKET MAN

7,5

Ø 116

1”

Suitable for Man TGA V9, 82L, 01

Ø 92,5

OM 0384 DRIVE AXLE NUT SOCKET MAN TGA Ø118mm

NEW

Suitable for MAN TGA 460 axles, V982L-01 (disc brakes & ABS).

175

Ø 95

Ø 49

OM 0386 REAR AXLE NUT SOCKET MERCEDES/MAN Ø87mm

175

Ø 87

Ø 95

Suitable for Atego, Vitaro 814 and MAN rear axles.

Ø 49

NEW

Ø 87

110

OM 0387 REAR AXLE NUT SOCKET MERCEDES/MAN 101mm

Ø 115

NEW 110

Ø 115

Ø 101

Suitable for Hypoïd and trailer axle NR7/4, Omnibus 0305G, 0405G.

Ø 101

11.5

OM 0388 DRIVE AXLE NUT SOCKET MAN/MERCEDES Ø101.5mm

8 9

3/4”

NEW

10 Ø 101,5

11 227

TECHNICAL TOOLS WHEEL

1”

OM 0322 6 PIN HUB SOCKET MAN & MERCEDES Ø117mm

100 Ø 117 1” Ø 146

Suitable for rear axles TGA 142.5

OM 0321 12 & 6 PIN REVERSIBLE HUB SOCKET MAN/MERCEDES Ø102mm

Ø 116

11.5

Ø 146

100

Ø 99

7 8

Ø 116 98

OM 0307 6 PIN REAR HUB SOCKET MERCEDES Ø71.5mm

7,5

1”

Ø 92,5

Ø 116

1”

Suitable for rear models HL 2/2, 2/7, 2/13

70 10

OM 0309 6 PIN REAR HUB NUT SOCKET MERCEDES Ø75mm

3/4”

70 Ø 75 3/4”

Suitable for front hubs AL 3/1, 3/2, 3/3, 3/4, 3/7, 3/8 and for rear hubs HL 2/14, 2/30, KL 2/16, 4/1, 4/8, 4/16, 4/17, 4/23, 4/28, 4/29, KD 4/6G, HO 4/2, 4/18, NR 4/4

Ø 84

Ø 99

Ø 116

Suitable for: Front hub 7TN AL 7/1 Rear hub 10 TN/13TN, HL 7/0, 7/1, 7/2, 7/3, 7/18, 7/015, 7/021, HO 7/8, 7/9, HD 7/2, 7/19DG, 7/016DG

Ø 84

Ø 102 142.5

70 8

OM 0305 12 PIN REAR HUB SOCKET MERCEDES Ø90mm

Ø 97

1”

Ø 90

Suitable for Mercedes Actros 1840, rear axle BRG year 2001

11 228

Ø 97

1”

TECHNICAL TOOLS WHEEL OM 0301 6 PIN HUB SOCKET MERCEDES Ø95mm

118

Ø 118

1”

Suitable for axles and trailers

100

7.5

1”

Ø 126

OM 0311 6 PIN HUB SOCKET MERCEDES ATEGO Ø101mm

Ø101

100

Ø 126

1”

119.5

OM 0308 6 PIN TRAILER HUB SOCKET MERCEDES Ø113mm

9.8

Ø 122

1”

Ø 113

119.5

1” Ø 122

Suitable for models NSA/2, NSA/10, HL 6/1, 6/2, 6/3, HD 6/3

6 7

OM 0385 REAR AXLE NUT SOCKET BENZ Ø116mm Suitable for HL/HL8 Actros axles.

7.5

NEW

Ø 116

1” Ø 136

OM 0343 8-SIDED SOCKET Ø116mm RENAULT/VOLVO/DAF

Ø 136

1”

11 229

9.8

TECHNICAL TOOLS WHEEL 130

OM 4480 8-SIDED FRONT HUB NUT SOCKET SCANIA Ø80mm

Ø 100

2 7.6

131

Ø 116

1“

OM 0324 4 PIN REAR AXLE SOCKET SCANIA Ø91mm

131 91

Ø 116

1“

OM 4100 8-SIDED REAR HUB NUT SOCKET SCANIA Ø100mm 3/4"

3/4”

OM 0389 GROOVE NUT SOCKET WITH 8 STUDS SCANIA Ø103mm

NEW Specific for SCANIA 420 Heavy duty tipper.

9 10 11 230

83 Ø 100

Ø 123

3/4”

OM 0355 UNIVERSAL HGV HUB COVER REMOVAL

TECHNICAL TOOLS WHEEL OM 0370 3/4" ROLLER BEARING AXLE NUT SOCKET BPW 6.5/9T 65mm

1 NEW

2 60

1”

Ø 116

OM 0334 HUB SOCKET BPW TRAILERS 6.5-9T

Ø 90 1”

Ø 116

Suitable for axle 6.5-9T type H, R, N, ECO H/K/N, ECO-MAXX H/K/N, ECOPlus H, ECOPlus 2 H/KH

Ø 90

Ø 100

OM 0335 HUB SOCKET BPW TRAILER 12T

Ø 100

1”

Ø 74

1”

OM 0371 3/4" ROLLER BEARING AXLE NUT SOCKET BPW 12T 80mm

Ø 100

Suitable for axle 12T type H, R, K, N, ECO H/KH/N, ECO-MAXX H/ KH/N, ECOPlus H/KH

7 NEW

8 9

Ø 109

41 Ø 129

NEW

41 Ø 129

OM 0373 REAR HUBCAP NUT SOCKET BPW 12T 109mm 8 SIDED

11 231

TECHNICAL TOOLS WHEEL

110

41 Ø 132

OM 0374 REAR HUBCAP NUT SOCKET BPW 12T 111mm

NEW

41 Ø 132

2 84 3/4” Ø 110

85 84

Ø 110 Ø 133

OM 0375 REAR HUBCAP NUT SOCKET BPW 16T 110mm 8 SIDED

Ø 110

Ø 133

123

Ø 20 110

Ø 154

123

OM 0336 6 PIN HUB SOCKET RENAULT FONTENAC TRAILER Ø160mm

160

1”

11 232

Ø 20

Ø 193

1”

Ø 154

12 3

OM 0333 6 SIDES REVERSIBLE HUB SOCKET FRUEHAUF TRAILERS 123mm/110mm

9 10

1”

3 12

1”

3 12

NEW

3/4”

Ø 193

NEW

OM 0372 3/4" ROLLER BEARING AXLE NUT SOCKET BPW 16T HEX

TECHNICAL TOOLS WHEEL OM 0329 8 SIDES HUB SOCKET ROR TRAILERS 127mm

Ø 90

127

115

Ø 148

Ø 20

Ø 126

Ø 74

125

Ø 98

OM 0330 8 SIDES HUB SOCKET ROR TRAILERS 84mm

Ø 83

Ø 74

125

Ø 98

OM 0376 AXLE TRAILERS NUT SOCKET SAF 85mm HEX

5 NEW

6 7

140

40 1” Ø 172

OM 0332 6 PIN HUB SOCKET S.A.F Ø140mm

Ø 172

1”

8 9

1” Ø 108

OM 0331 12 PIN HUB SOCKET IVECO Ø85mm

Ø 83

11 233

140

TECHNICAL TOOLS WHEEL

OM 0377 WHEEL CAPSULE AND AXLE NUT SOCKET 85mm 1/4"

NEW

OM 0378 WHEEL CAPSULE AND AXLE NUT SOCKET 80mm 1/4"

NEW

2 3

4 5 6

OM 0379 WHEEL CAPSULE AND AXLE NUT SOCKET 85mm 1/4"

NEW

OM 0380 WHEEL CAPSULE AND AXLE NUT SOCKET 111mm 1/4"

NEW

OM 0381 WHEEL CAPSULE AND AXLE NUT SOCKET 120mm 1/4"

NEW

7 8 9 10 11 234

TECHNICAL TOOLS WHEEL

OM 0001 REAR HUB SOCKET VW CRAFTER/MOVANO/MASTER

OEM codes: T50017, CH-50112

NEW

3/4" Ø74mm

2 111 1/2”

Ø 76

Ø 42

111 Ø 63 Ø 42

1/2”

Suitable for rear models: HL 0/3, 0/6, 0/7, HL 1/2, 1/3, 1/8, 1/9, HL 2/2, 2/3, 2/5, 2/9, 2/11, 2/12, 2/15 Specific to Sprinter 412T, VW LT 100

1” Ø 95

OM 0323 6 PIN REAR AXLE SOCKET VARIO/ SPRINTER/ATEGO Ø88mm

Ø 76

OM 0303 6 PIN HUB SOCKET SPRINTER Ø63mm

7.5

100 Ø 88

1”

OM 0156 3/4 D. BI-HEX SOCKET Ø56mm FORD TRANSIT

Ø 95

Suitable for Vario 814, Sprinter 616, Atego HL 2/43 DG6.2

OM 0065 HUB WRENCH 12 SIDED Ø65mm IVECO DAILY/ FORD TRANSIT

NEW

OM 4024 REAR HUB BOLT REMOVAL WRENCH RENAULT/ MASCOTT 3/4" D.

13,5mm

OM 0046 SPANNER 3/4" D. Ø33mm FOR WHEEL NUT MAN

Ø 68mm

10 11 235

TECHNICAL TOOLS WHEEL

NEW

OM 0565 1" IMPACT HEX. SOCKET Ø65mm

2 3

OM 0567 1" IMPACT HEX. SOCKET Ø77mm

NEW

4 5

NEW

OM 0585 1" IMPACT HEX. SOCKET Ø85mm

6 7 8 9 10 11 236

OM 0396 REVERSIBLE EXTENDED WRENCH 32-33mm Ø25.4mm L.400mm NEW

OM 0397 REVERSIBLE EXTENDED WRENCH 27-32mm Ø25.4mm L.400mm NEW

OM 0398 REVERSIBLE EXTENDED WRENCH 27-33mm Ø25.4mm L.400mm NEW

TECHNICAL TOOLS WHEEL

OM 0400 1" TORQUE IMPACT SOCKET EXTRA DEEP 32mm 450Nm Hexa. L.300mm

OM 0402 1" TORQUE IMPACT SOCKET EXTRA DEEP 33mm 550Nm

NEW

OM 0401 1" TORQUE IMPACT SOCKET EXTRA DEEP 32mm 500Nm Hexa L.300mm

NEW

OM 0403 1" TORQUE IMPACT SOCKET EXTRA DEEP 33mm 650Nm

Hexa. L.300mm

NEW

Hexa. L.300mm

NEW

OM 4525 TORQUE MULTIPLIER R1:56 2800Nm+7 HGV SOCKETS 1" H.75mm

4 5 6

7 sockets: 24-27-30-32-33-36-38mm

7 OM 9311 WHEEL STUD THREAD RESTORER HGV

This tool is designed to restore and align damaged wheel studs threads.

Applications: • M18x1.5mm DAF/IVECO/MAN/RENAULT/VOLVO • M20x1.5mm MERCEDES/SCANIA • M22x1.5mm DAF/FORD/MAN/RENAULT/VOLVO/MERCEDES/SCANIA • 7/8”-11 SCANIA • Adaptor hex size: 32mm The set includes four split dies to suit the most commun HGV wheel studs threads sizes.

8 9 10

Instructions: • Choose the split die that matches wheel stud • Stretch the die and place over the base of the stud • Loosen with the socket

11 237

TECHNICAL TOOLS WHEEL

OH 9001 WHEEL DOLLY HGV Max.

650

Mounted on 3 swivelling wheels Lifts wheel using hydraulic piston (max 650kg)

4 5

OM 9002 TYRE LIFTING DOLLY HGV

• Arms width: 500mm • Depth: 350mm

7 8 9 10

OH 9000 WHEEL DOLLY HGV Max.

1200

• • • • • • • • •

Height: min.1310mm-max.2100mm Lenght: 980mm Width: min.1270mm-max.2300mm Rolls lenght: 490mm Space between rolls: min.720mm-max.1250mm Rolls: Ø80mm Dimensions of wheels: min.1000mm-max.2200mm Depth of wheels: 800mm maximum Dolly wheels: 4 big wheels PU Ø145mm including 2 swivel wheels with brakes • Weight: 125kg

Wheel lifting by hydraulic cylinder (1200kg maximum).

11 238

Wheel diameter up to 2200mm

609mm

220mm

638mm

125mm

508mm

583mm

883mm

48mm

1073mm

1090mm

Poids Weight

68kg

TECHNICAL TOOLS WHEEL DM 0204 HGV/AGRICULTURAL VEHICLES HYDROPNEUMATIC BEAD BREAKER

1 2

NEW Suitable for 17.5" to 60" wheels

OP 1465 TYRE RELEASER

Can be used on the vehicle. Saves time. Air regulator. Handle exhaust. Agricultural use.

Characteristics: • Travel : 80mm • Jaw opening : 68mm • Length: 380mm • Connection : 1/4" • Supply pressure : 6.2bar • Consumption: 113l/min • Net weight : 4.6kg

6 7

OH 0010 PUSH CYLINDER SET 10T DOUBLE TYRE 3/8" Max.

Contents: • 1x10T cylinder height 88mm travel 38mm • 3 aluminium connectors H.25-50-75mm • 1 metal soleplate 10mm

3/8" adapter

8 9 10 11 239

TECHNICAL TOOLS WHEEL

OM 0358 BRAKE PLIERS PL 670mm OPENING 200mm

OM 0357 BRAKE PLIERS PL 520mm OPENING 210mm

2 3

OM 4526 TORX SOCKET FEMALE E20-E24 1" FOR BRAKE CALIPER MAN

OM 0359 DRUM BRAKE PLIER IVECO/VOLVO WITH Z-CAM

For adjusting brake caliper

5 6 7 8 9 10 11 240

OM 0390 HALDEX BRAKE LINKAGE ADJUSTER EXTACTOR NEW

OM 0391 BPW BRAKE LINKAGE ADJUSTER EXTRACTOR

NEW

OM 0320 BRAKE DISMOUNTING TOOL L.450mm-620mm

TECHNICAL TOOLS WHEEL

OC 8078 5 PCS NYLON TRIM REMOVAL SET

1 2

OM 0259 TYRE REMOVER L.650mm

3 OM 0255 TYRE CHANGERS SHEATHED L.495mm

Plastic coating on the rear side: antiscratch !

Allows to dismount tyres without damages on rims. The removable plastic carrier (6mm thick) is held by 4 screws on the steel part.

For OM 0255

DM 1302 SHEATED ERGONOMIC TYRE LEVER L.495mm For DM 1000/DM 2000/DM 1301

NEW

DM 1304 LEVER L.530mm FOR SMALL TUBELESS TRUCK TYRES NEW

OC 8034 TYREPLIERS

SA 0355 PLASTIC PROTECT

NEW

6 7 8 9 10 11 241

TECHNICAL TOOLS AIRCON

AC 5028 ELECTRONIC STETHOSCOPE LEAK DETECTOR

• • • • •

5 6 7

OE 2007 400Nm RECHARGEABLE IMPACT WRENCH

• • • • • •

Impact wrench square 1/2" Continuous battery life 2h Charge time 1h Power 400Nm Pulses 2600/min Supplied in composite case with 1 charger and one 19.2V battery

8 9 10 11 242

SA 1603 RECHARGEABLE BATTERY 2.0Ah 19.2V

SA 1605 SET OF 2 (ELECTRICAL CONTACT) BRUSHES

For OE 2007

TUBELESS TYRE REPAIR KITS

TECHNICAL TOOLS WHEEL

These tubeless tyre repair kits allow you to mend a punctured tyre where you are (without removing the tyre). The wicks are designed to make a lasting repair through vulcanization. This simple and rapid repair solution improves productivity by guaranteeing optimum repair quality.

EG 0210 LV TUBELESS TYRE REPAIR KIT

1 2

Composition: • 1 preparation file for the opening of the braid • 1 braid insertion handle • 1 tube of lubricant • 60x100mm repair braids

SA 0210 60x100mm HGV TYRE REPAIR BRAIDS For EG 0210

4 5 6 7

EG 0280 MANUAL TYRE SPREADER WITH STAND Practical for tyre repair

8 9

• For tyres Ø8 to 16", 76 to 203mm width • Weight : 18.5kg

NEW

10 11 243

TECHNICAL TOOLS WHEEL

1 2 3

EG 0260 TIRE REPAIR KIT

NEW

This new solution for repairing tubeless tyres consists of inserting a vulcanising mushroom plug without removing the tyre. 2 diameters of mushroom are included in the set (Ø8 and 11mm). Simple and fast repair solution that guarantees the same high-quality repair as a traditional mushroom (glued to the inside of the tyre).

Contents: • SA0255: 1 insertion gun • 2 insertion nozzles Ø8 and Ø11mm • 1 preparation rasp • SA0257: 2x25 vulcanising mushrooms Ø8mm • SA0258: 20 vulcanising mushrooms Ø11mm • 1 bottle vulcaniser 236ml

5 6 7 8 9 10

SA 0259 VULCANIZING CIMENT 236

11 244

For EG 0260/EG 0250

SA 0258 20 MUSHROOMS Ø11mm

NEW

For EG 0260

NEW

SA 0257 50 MUSHROOMS Ø8mm For EG 0260

NEW

TECHNICAL TOOLS WHEEL

OP 3152 PORTABLE TYRE INFLATOR WITH WALL STAND 10

140

2 Characteristics: • Tank: 10L • Max pressure: 14.33bar • Working pressure: 10bar • Overpressure protection: 10bar • Tank gauge: 0-14bar • Inflating gauge: 0-10bar • Height: 700mm • Tank Ø: 300mm • Hose: L.140cm Ø6mm • Foam handle • Twin button operation

4 5 6 Complies with directives 86/217/EEC and 87/404/EEC

AC 4951 DEPTH GAUGE FOR TYRES

OP 0049 INFLATOR GUN For commercial vehicles and vans. Complies with directive 86/217/EEC UNI EN 12645

8 9 10

• Digital display (mm/inch) 0 to 13mm • Accurate to 0.01mm • Reset (to zero) in any position

Graduations of 0.7 to 12bar

11 245

TECHNICAL TOOLS WHEEL

1 2 3

4 5

OM 7090 TIRE DEFLATR FOR TPMS VALVES

Safely release the air. Four same sizes noted with position mark help users to install the tire back the same position. Save time to reset the TPMS system with computer.

OM 7095 TPMS TOOL SET To ensure a correct assembly/removal of the tire pressure control sensors, special tools are today required. This set is designed to make this kind of operations easier.

Content: • 1pc 1/4" D. adjustable torque driver handel (2-10Nm) • 2pces 1/4" D. deep sockets 11 and 12mm • 1pc 1/4" D. 100mm extension bar • 1pc 1/4" D. Torx bit socket 20mm

6 7

OM 7008 2-IN-1 REVERSIBLE VALVE/STEM REMOVAL TOOL

AC 4049 TORQUE LIMITED CORE REMOVERx2

Easy-grip resin handle

Torque: 1 : 25Ncm 1 : 2.5Ncm

9 10 11 246

Valve stem remover

Valve puller

OM 1306 4 CORE REMOVERS WITH HOLDING SYSTEM NEW

Equipped with a core holding system, the core remains attached to the tool, limiting loss risk and facilitating the core installation.

WHEEL BALANCERS/TYRE CHANGERS

NEW

WHEEL BALANCERS/TYRE CHANGERS NEW

CONTENTS

WHEEL ALIGNMENT

2 3 4

5 6 7 8 9 10 11 248

TYRE CHANGER

WHEEL BALANCER

249 252 262

OM 2830 LASER WHEEL ALIGNMENT GAUGE FRONT WHEELS

WHEEL BALANCERS/TYRE CHANGERS WHEEL ALIGNMENT NEW

1 This system has been produced to address the demands of fast track workshops requiring reliable and accurate measurement. Cars, trucks and buses, and particularly new vehicles with low ground clearance or extended front ends. Operated by two long-life AA batteries, typically changed every 6-12 months. This tool has become an essential tool for all vehicle workshops, tire fitting bays, race

2 3

and rally car preparation areas, technical schools and training establishments. Unlike most other makes, the OM 2830 has been designed to be used on a vehicle lift as well as on the ground. Quick and easy to use, it is simple in operation and can be calibrated on site without any special equipment.

5 Technical characteristics: • Compatible with rim diameter 8 to 24 inches • Measurement range ± 2 degrees < 30mm • batteries : 2xAA 1.5V (battery life between 6 and 12 depending on frequency of use) • Pressure release switch (Up position : stop) • Toggle switch: class 2, eye-safe, 650Nm, 1.0mW

Accurate and robust Precision engineered For use on car, truck and bus Designed for use on vehicle lifts and ground Low beam height Easy to calibrate

Large mirror and close to the ground for maximum visibility beneath vehicles with a low ground clearance. Large, adjustable laser target plate positioned close to the ground for maximum visibility beneath vehicles with a low ground clearance. Easy to read scales with quick and foolproof conversion from degrees to millimetres or inches. All types of vehicles can be accommodated with short or large overhangs. Designed and engineered for accuracy and durability, reads the combined toe angle on almost any vehicle. With a minimal footprint, it has been designed to fit onto ramps and lifts as well as the ground.

6 7 8 9 10 11 249

WHEEL BALANCERS/TYRE CHANGERS WHEEL ALIGNMENT NEW

EG 8380 PAIR OF TURNTABLES 380x380mm H.50mm

2 3 4

5 6 7

OM 0223 REINFORCED SELF LOCKING WRENCH Ø14-Ø23mm

Length: 380mm

OM 2833 FRONT END ALIGNMENT STEERING WHEEL LEVEL This level is usefull to align steering wheels for the vehicles with mechanical or power steering. Easy to use, it is automatically kept centered thanks to fixing springs.

8 9 10 11 250

OM 0034 FOOTPEDAL OPERATED STEERING WHEEL LOCK

OM 2820 DIGITAL CAMBER ANGLE GAUGE

WHEEL BALANCERS/TYRE CHANGERS WHEEL ALIGNMENT NEW

Characteristics: • Accurate to 0.1° (6 minutes) at 90° • Easy to use with large, clear digital readout • Measure directly off the tire sidewall or the wheel rims (using the contact fingers) • Suitable for all wheel rims up to 20 inches • Easily calibrated with alternate zero facility (when not working on a level surface) • Smarter return on your investment

2 3

When using the contact fingers: 1. Fit the fingers to the front edge of the gauge, adjusting them to the wheel rim to be measured. 2. Check the floor level with the fingers fitted. If the floor is not reasonably smooth, place a piece of wood across the vehicle and measure on the wood. 3. Carry out the camber measurement as described above.

5 Operating the gauge : 1. Always use the gauge with the handle pointing upwards. 2. To measure camber, check that the vehicle is on a level surface with the front wheels pointing straight ahead. Also check that tire pressures are correct. 3. Check the floor level across the front of the vehicle, with the gauge facing the same direction as the vehicle. If the floor is not level, press the "C" button. 4. The gauge will now read zero. (Alternative zero). 5. You can now take a direct reading of the camber angle of the left hand front wheel. 6. Check the floor level again across the front of the vehicle with the gauge facing the rear of the vehicle. 7. Press the "C" button again to obtain an alternative zero reading. 8. You can now take a direct camber reading of the right hand front wheel. Note : When using the "alternative zero" facility, the gauge must face the same direction as when measuring camber.

OM 2825 6 PCES ALIGNMENT TOOL VW

This tool set allows an easy and accurate adjustment of the camber on VW, AUDI, SEAT, SKODA, CHRYSLER... when passing the front-wheel axle unit.

6 7 8 9 10

Content: • Adjusting tool from 130mm to 180mm • Adjusting tool from 140mm to 190mm • Adjusting tool from 170mm to 220mm

11 251

WHEEL BALANCERS/TYRE CHANGERS TYRE CHANGER NEW

1 2

DM 2000 AUTOMATIC TYRE CHANGER 13"-28" WITH HELPER ARM

3 à 15"

1180mm

Automatic tyre changer designed for an effortless mounting and removal of tyres. Suitable for cars, commercial vehicles and 4x4 tyres.

13 à 28"

3 4

5 6

Integrated tubeless inflator (2x6L) Turntable with anti-pinch device and jaw with inflating nozzle

7 8 9

Air cleaner and oil lubricator

10 11 252

Long lasting metallic foot controller 2 speeds without switch

Adjustable bead breaker blade with protection and double acting cylinder

WHEEL BALANCERS/TYRE CHANGERS TYRE CHANGER NEW

SA 8904 Comes with: • DM1100: helper arm for DM1000/DM2000 • DM1102: dual head quick fastening connection for alu/steel • SA8902: 5 protection covers • SA8903: 5 clips protection covers • SA8904: blade protection cover • SA8906: set of 4 jaw covers • OM0255: L.495mm lever with protection for alu rims

DM 1100

SA 8902

OM 0255

Characteristics: • Roller-supported horizontal arm • Max. wheel diameter: 1180mm • Tyre width: 3-15" • Turntable with anti-pinch device and jaw with inflating nozzle • Outside clamp: 13-24" • Inside clamp: 15-28" • 2 speed without switch: Turntable rotation speed 1: 6.5rpm Turntable rotation speed 2: 13rpm • Ergonomic foot pedal • Adjustable bead breaker blade with protection and double acting cylinder

• • • • • • • • • • •

Tyre inflation is pedal-operated with a precision gauge Working air pressure: 8-10bar Air cleaner and oil lubricator Tubeless inflator safety valve: 3.5bar Tubeless tank safety valve: 10bar Sound level < 70 dB Power supply voltage: 400V-50Hz Power: 0,85-1.1kW Bead breaker arm power: 2500kg Tyre changer weight: 598kg Dimensions: 2000x1950x2450mm

SA 8903

SA 8906

1 2 3 4

5 6 7

2450mm

8 High capacity 28"

Not included options: • DM1101: tyre press assist device • DM1103: motorbike kit

9 10

11 253

WHEEL BALANCERS/TYRE CHANGERS TYRE CHANGER NEW

1 2

DM 1000 AUTOMATIC TYRE CHANGER 10"-24"

3 Ă 12"

1180mm

Automatic tyre changer designed for an effortless mounting and removal of tyres. Suitable for cars, commercial vehicles and 4x4 tyres.

10 Ă 24"

3 4

Roller-supported horizontal arm assisting the translation

Eurodainu

Protection by clip for faster replacement

6 Turntable with anti-pinch device

7 8 9

Air cleaner and oil lubricator

10 11 254

Long lasting metallic foot controller

Adjustable 2 positions bead breaker blade with protection and double acting cylinder

WHEEL BALANCERS/TYRE CHANGERS TYRE CHANGER NEW OP 0049

OM 0255 SA 8904

Comes with: • OP0049: Eurodainu pressure gauge (complies with 86/217/EEC. Standard UNIEN 12645) • SA8902: 5 protection covers • SA8903: 5 clips protection covers • SA8904: blade protection cover • SA8906: set of 4 jaw covers • OM0255: L.495mm lever with protection for alu rims

SA 8902

SA 8903

SA 8906

Characteristics: • Roller-supported horizontal arm • Max. wheel diameter: 1180mm • Tyre width: 3-12" • Turntable with anti-pinch device • Outside clamp: 10-21" • Inside clamp: 12-24" • Turntable rotation speed: 6.5rpm • Ergonomic foot pedal • Adjustable 2 positions bead breaker blade with protection and double acting cylinder • Working air pressure: 8-10bar • Air cleaner and oil lubricator • Tubeless inflator safety valve: 3.5bar • Sound level < 70 dB • Power supply voltage: 400V-50Hz • Power: 0,85-1.1kW • Bead breaker arm power: 2500kg • Tyre changer weight: 248kg • Dimensions: 1900x1580x2000mm

2000mm

5 6 7 8

0 19

1580m

Not included options: • DM1100: helper arm for DM1000/DM2000 • DM1101: tyre press assist device • DM1102: dual head quick fastening connection for alu/steel • DM1103: motorbike kit

11 255

WHEEL BALANCERS/TYRE CHANGERS TYRE CHANGER NEW

DM 0500 SEMI-AUTOMTIC TYRE CHANGER 10"-21"

2 3 4

5 6

Semi automatic tyre changer designed for an effortless mounting and removal of tyres. Suitable for cars, commercial vehicles and 4x4 tyres.

Characteristics: • Tyre width: 3-12" • Outside clamp: 10-18" • Inside clamp: 12-21" • Turntable rotation speed: 6.5rpm • Ergonomic foot pedal • Working air pressure: 8-10bar • Air cleaner and oil lubricator • Tubeless inflator safety valve: 3.5bar • Power supply voltage : 230V • Power : 0.85-1.1kW • Bead breaker arm power : 2500kg • Weight : 177kg

Comes with: • SA8902: 5 protection covers • SA8903: 5 clips protection covers • SA8906: set of 4 jaw covers • OM0255: L.495mm lever with protection for alu rims

7 8 9 10 11 256

Not included options: • DM1101: tyre press assist device • DM1102: dual head quick fastening connection for alu/steel • DM1103: motorbike kit

WHEEL BALANCERS/TYRE CHANGERS TYRE CHANGER NEW DM 1100 HELPER ARM

Demounting operation: the bead pusher presses the upper bead into the drop centre of the rim so that it can be easily levered over the mounting head nose and easily demounted. Mounting operation of the upper bead: the roller retains the bead under the mounting head nose. The bead pusher follows rotation of the wheel, doing the laborious job of the operator, tyre and rim are preserved. This pneumatic arm is a real help for mounting and demounting tyres such as low profile tyres and run flat tyre systems.

For DM 1000/DM 2000

Control system

Articulated and adjustable arm to facilitate bead positioning

2 3 4

3 storage holder

Upper bead protecting roller for 4x4 and Run flat

5 6

Support cone for positioning the internal grip Rotating disk made to facilitate the removing of the 2nd bead

7 8

55 0m

1190mm

1330mm

10 11 257

WHEEL BALANCERS/TYRE CHANGERS TYRE CHANGER NEW

DM 1301 SUPPORT PLIER

Support plier for mounting/removing of low profile tyres, run flat. Multiplies the lever force for a better working ergonomics.

2 3

DM 1300 QUICK CHANGE KIT FOR REMOVING HEAD For DM 1000/DM 2000/SA 9901

Composition: • Female adapter with 1/4 turn lock system for the machine Ø28-29mm • Male adapter for the original removing head • Plastic head 73mm center

DM 1101 PRESS ASSIST DEVICE FOR LOW PROFILE OR RUN FLAT TYRE

DM 1102 DUAL HEAD QUICK FASTENING CONNECTION FOR ALU/STEEL For DM 1000/DM 2000

6 7 8

SA 1182 PLASTIC DEMOUNT HEAD For DM 1102

OM 0255 TYRE CHANGERS SHEATHED L.495mm

OM 0259 TYRE REMOVER L.650mm

Allows to dismount tyres without damages on rims.

9 10 11 258

The removable plastic carrier (6mm thick) is held by 4 screws on the steel part.

DM 1302 SHEATED ERGONOMIC TYRE LEVER L.495mm For DM 1000/DM 2000/DM 1301

SA 0355 PLASTIC PROTECT For OM 0255

DM 1304 LEVER L.530mm FOR SMALL TUBELESS TRUCK TYRES

WHEEL BALANCERS/TYRE CHANGERS TYRE CHANGER NEW

DM 1105 UNIVERSAL DEVICE TABLE REDUCER 23"-5"

For DM 1000/DM 2000

Several positions for the jaws to suit on many various wheels Suitable for many wheels as scooter and motorbike wheels with or without brake disk & belt drive, kart wheels, convex or alloy rims wheels.

• Jaws stroke : 355-558mm • Rim diameter : 5-23"

3 4

DM 1103 MOTORBIKE KIT

For DM 1000/DM 2000 Suitable for many wheels as scooter and motorbike wheels with or without brake disk & belt drive, kart wheels, convex or alloy rims wheels.

DM 0200 ROLL PLATFORM FOR BEAD BREAKER

7 OP 0659 TIRE BEAD BLASTER

OP 0049 INFLATOR GUN

For commercial vehicles and vans. Complies with directive 86/217/EEC UNI EN 12645

9 10

Graduations of 0.7 to 12bar

11 259

WHEEL BALANCERS/TYRE CHANGERS TYRE CHANGER NEW

OP 1465 TYRE RELEASER

Characteristics: • Travel : 80mm • Jaw opening : 68mm • Length: 380mm • Connection : 1/4" • Supply pressure : 6.2bar • Consumption: 113l/min • Net weight : 4.6kg

3 4

Can be used on the vehicle. Saves time. Air regulator. Handle exhaust. Agricultural use.

DM 0204 HGV/AGRICULTURAL VEHICLES HYDROPNEUMATIC BEAD BREAKER Suitable for 17.5" to 60" wheels

5 6 7 8 9 10 11 260

OM 7008 2-IN-1 REVERSIBLE VALVE/STEM REMOVAL TOOL Easy-grip resin handle Valve stem remover Valve puller

OM 1305 VALVE PULLER QUICK APPROACH

• Self tightening, fast connexion without screwing • 4 rim edge positions to fit on all rims

AC 4049 TORQUE LIMITED CORE REMOVERx2 Torque: 1 : 25Ncm 1 : 2.5Ncm

OM 1306 4 CORE REMOVERS WITH HOLDING SYSTEM Equipped with a core holding system, the core remains attached to the tool, limiting loss risk and facilitating the core installation.

WHEEL BALANCERS/TYRE CHANGERS TYRE CHANGER NEW

SA 8904 BLADE PROTECTION COVER 260x80mm

SA 8906 SET OF 4 JAW COVERS

For DM 1000/DM 2000

2 SA 0148 RUBBER PAD BLATE For DM 1000

SA 0171 POSITIONING BLOCK For DM 1000/DM 2000

SA 0152 RUBBER PAD BLATE

For DM 2000

SA 8901 METAL HEAD DEMOUNT ASSEMBLY

SA 8902 5 PROTECTION COVERS

For DM 1000/DM 2000

For SA 8901/DM 1000/DM 2000

SA 8907 STEEL HEAD FOR AUTOMATIC TYRE CHANGER SICAM/M&B/BEISSBARTH

SA 8903 5 CLIPS PROTECTION COVERS For SA 8901/DM 1000/DM 2000

SA 8908 STEEL HEAD FOR AUTOMATIC TYRE CHANGER GIULIANO/CEMB/CORMACH

DM 0109 ALUMINIUM RIM PROTECTOR

5 6 7 8 9

SA 8909 STEEL HEAD FOR AUTOMATIC TYRE CHANGER GS/SNAPON/HOFMAN

10 11 261

WHEEL BALANCERS/TYRE CHANGERS WHEEL BALANCER NEW

1 2

EQ 3000 AUTOMATIC WHEEL BALANCER 3D WITH LCD SCREEN

1100mm

1,5 Ã 20"

max. 28"

Automatic wheel balancer designed for quick, easy and precise interventions on cars, commercial vehicles and 4x4.

70kg

3 4

5 6

Ergonomic and functional weight holder top with large trays for different types of counterweights and tools.

7 8

250mm

210mm

To facilitate the assembly of bead rims with big backwardation

9 10 11 262

Long threaded pin for easier assembly of all types of accessories

WHEEL BALANCERS/TYRE CHANGERS WHEEL BALANCER NEW Comes with: • 4 counterweights SA8408: centering SA8409: centering SA8410: centering SA7849: centering

from 40 to 137mm: cone Ø40-62mm Ø40mm cone Ø54-81mm Ø40mm cone Ø70-98mm Ø40mm cone SUV Ø95-137mm Ø40mm

• SA8305: rim width caliper

• OC8034: tyrepliers

• EQ8404: fast nut Ø40x4mm with bowl/joint/ compression ring

• SA8905: calibration weight 50g

1 2 3

Functions: • European software • Automatic cycle • Multipurpose keys • Static and dynamic program (dual plane) in a single measuring run • 9 modes: 7 Alu (hidden weight) +Optimization+Motocycle balancing • Automatic reset/Machine calibration: 50g weights • Auto diagnostic with error codes • Multiple operator function • Simultaneous display of weights and weight positions • Automatic stop on weight position with led light inside the rim • Measuring precision: ±1g • Display precision: 1g/5g

Characteristics: • Power supply voltage: 220V-50Hz • Motor power: 90W • Wheel balancer weight: 163kg • Dimensions (wheel guard opened): 1455x980x1450mm • Sound level < 69dB • 17" high resolution LCD with three-dimensional graphics (automatic standby mode if the machine is not being in use after 5min) • Max. wheel diameter: 1100mm • Max. wheel weight: 70kg • Rim diameter: 1-28" • Rim width: 1.5-20" • Wheel 3 parameters fully automatic measurement • Automatic wheel guard • One balance time: 7s • Rotating speed: 140rpm • Ergonomic and functional weight holder top with large trays for different types of counterweights and tools. • 3 storage holder • Support of positioning weight

5 6 7 8 9

3 storage holder

Automatic stop on weight position with led light inside the rim

Optionnal (not include): • EQ9400: universal cylindric quick flange Ø40mm with 5 rings • EQ6400: Cylindrical universal centering plate Ø40mm with 3 rings • EQ8091: centering cone VU Ø118-174mm with spacer disk Ø40mm

10 11 263

WHEEL BALANCERS/TYRE CHANGERS WHEEL BALANCER NEW

1 2 3

EQ 2000 AUTOMATIC WHEEL BALANCER

1100mm

1,5 Ã 20"

max. 28"

Automatic wheel balancer designed for quick, easy and precise interventions on cars, commercial vehicles and 4x4.

70kg

5 6 7 8 9 10 11 264

250mm

210mm

To facilitate the assembly of bead rims with big backwardation

Long threaded pin for easier assembly of all types of accessories

WHEEL BALANCERS/TYRE CHANGERS WHEEL BALANCER NEW

Comes with: • 4 counterweights SA8408: centering SA8409: centering SA8410: centering SA7849: centering

from 40 to 137mm: cone Ø40-62mm Ø40mm cone Ø54-81mm Ø40mm cone Ø70-98mm Ø40mm cone SUV Ø95-137mm Ø40mm

• SA8305: rim width caliper

• OC8034: tyrepliers

• EQ8404: fast nut Ø40x4mm with bowl/joint/ compression ring

• SA8905: calibration weight 50g

1 2 3

Characteristics: • Power supply voltage: 220V-50Hz • Motor power: 90W • Wheel balancer weight: 149kg • Dimensions (wheel guard opened): 1550x1160x1490mm • Sound level < 69dB • Digital display (automatic standby mode if the machine is not being in use after 5min) • Max. wheel diameter: 1100mm • Max. wheel weight: 70kg • Rim diameter: 1-28" • Rim width: 1.5-20" • Wheel 3 parameters fully automatic measurement • Automatic wheel guard • One balance time: 7s • Rotating speed: 140rpm • Shaft: L.210mm-Ø40mmx4mm • Ergonomic and functional weight holder top with large trays for different types of counterweights and tools. • 4 storage media • Support of positioning weight

5 6 7 8 9

4 storage media

Automatic stop on weight position with led light inside the rim

10 11 265

WHEEL BALANCERS/TYRE CHANGERS WHEEL BALANCER NEW

1 2

EQ 1000 SEMI AUTOMATIC WHEEL BALANCER

1100mm

1,5 Ã 20"

max. 28"

Wheel balancer designed for quick, easy and precise interventions on cars, commercial vehicles and 4x4.

70kg

3 4

5 6 7 8 9 10 11 266

250mm To facilitate the assembly of bead rims with big backwardation

210mm Long threaded pin for easier assembly of all types of accessories

WHEEL BALANCERS/TYRE CHANGERS WHEEL BALANCER NEW

Comes with: • 4 counterweights from 40 to 137mm: SA8408: centering cone Ø40-62mm Ø40mm SA8409: centering cone Ø54-81mm Ø40mm SA8410: centering cone Ø70-98mm Ø40mm SA7849: centering cone SUV Ø95-137mm Ø40mm • SA8305: rim width caliper • SA8905: calibration weight 50g • OC8034: tyrepliers • EQ8404: fast nut Ø40x4mm with bowl/joint/compression ring

Functions: • European software • Automatic cycle • Multipurpose keys • Static and dynamic program (dual plane) in a single measuring run • 9 modes: 7 Alu (hidden weight)+Optimization+Motocycle balancing • Automatic reset/Machine calibration: 50g weights • Auto diagnostic with error codes • Multiple operator function • Simultaneous display of weights and weight positions • Measuring precision: ±1g • Display precision: 1g/5g

2 Characteristics: • Power supply voltage: 220V-50Hz • Motor power: 90W • Wheel balancer weight: 149kg • Dimensions (wheel guard opened): 1550x1160x1490mm • Sound level < 69dB • Digital display (automatic standby mode if the machine is not being in use after 5min) • Max. wheel diameter: 1100mm • Max. wheel weight: 70kg • Rim diameter: 1-28" • Rim width: 1.5-20" • Wheel 3 parameters manual measurement • Automatic wheel guard • One balance time: 7s • Rotating speed: 140rpm • Shaft: L.210mm-Ø40mmx4mm • Ergonomic and functional weight holder top with large trays for different types of counterweights and tools. • 4 storage media • Support of positioning weight

3 4

5 6 7 8 9

4 storage media

Wheel 3 parameters manual measurement

10 11 267

WHEEL BALANCERS/TYRE CHANGERS WHEEL BALANCER NEW

1 2

EQ 6404 QUICK NUT Ø40x4mm WITH BOWL/SEAL/RING

Contents: Nut Ø40x4mm Bowl Seal Compression ring

3 4

SA 8404 QUICK NUT INTENSIVE USE Ø40x4mm For EQ 1000/EQ 2000/EQ 3000

5 6 7 8 9 10 11 268

EQ 8383 QUICK NUT INTENSIVE USE Ø38x3mm WITH BOWL/SEAL/RING

EQ 8403 QUICK NUT INTENSIVE USE Ø40x3mm WITH BOWL/SEAL/RING

Contents: SA8383: quick nut Ø38x3mm SA8611: bowl Ø120mm SA8511: seal Ø133mm SA8508: compression ring

Contents: SA8403: quick nut Ø40x3mm SA8611: bowl Ø120mm SA8511: seal Ø133mm SA8508: compresion ring

EQ 8363 QUICK NUT INTENSIVE USE Ø36x3mm WITH BOWL/SEAL/RING

EQ 8404 QUICK NUT INTENSIVE USE Ø40x4mm WITH BOWL/SEAL/RING

Contents: SA8363: quick nut Ø36x3mm SA8611: bowl Ø120mm SA8511: seal Ø133mm SA8508: compression ring

Contents: SA8404: quick nut Ø40x4mm SA8611: bowl Ø120mm SA8511: seal Ø133mm SA8508: compression ring

WHEEL BALANCERS/TYRE CHANGERS WHEEL BALANCER NEW EQ 6400 CYLINDRICAL UNIVERSAL CENTERING PLATE Ø40mm WITH 3 RINGS

Comes with: • SA8458: ring Ø58mm • SA8460: ring Ø60mm • SA8465: ring Ø65mm

EQ 9400 UNIVERSAL CYLINDRIC QUICK FLANGE Ø40mm WITH 5 CENTERING RINGS For intensive use

Composition: • EQ8400: universal cylindric quick flange Ø40mm for EQ1000/EQ2000/EQ3000 • SA8455: ring Ø55mm • SA8457: ring Ø57mm • SA8458: ring Ø58mm • SA8460: ring Ø60mm • SA8465: ring Ø65mm

SA 8466 5 CENTERING RINGS

EQ 9380 UNIVERSAL CYLINDRIC QUICK FLANGE Ø38mm WITH 5 CENTERING RINGS For intensive use

EQ 9360 UNIVERSAL CLYLINDRIC QUICK FLANGE Ø36mm WITH 5 CENTERING RINGS For intensive use

For EQ 8280/EQ 8360/EQ 8380/EQ 8440

EQ 9280 UNIVERSAL CYLINDRIC QUICK FLANGE Ø28mm WITH 5 CENTERING RINGS For intensive use

Composition: • EQ8380: universal cylindric quick flange Ø38mm • SA8355: ring Ø55mm • SA8357: ring Ø57mm • SA8358: ring Ø58mm • SA8360: ring Ø60mm • SA8365: ring Ø65mm

Composition: • EQ8360: universal cylindric quick flange Ø36mm • SA8355: ring Ø55mm • SA8357: ring Ø57mm • SA8358: ring Ø58mm • SA8360: ring Ø60mm • SA8365: ring Ø65mm

Composition: • EQ8280: universal cylindric quick flange Ø28mm • SA8355: ring Ø55mm • SA8357: ring Ø57mm • SA8358: ring Ø58mm • SA8360: ring Ø60mm • SA8365: ring Ø65mm

EQ 9440 UNIVERSAL CONIC QUICK FLANGE ISO40 WITH 5 CENTERING RINGS For intensive use

For EQ 8400

SA 8366 5 CENTERING RINGS

Composition: • EQ8440: universal conic quick flange ISO40 • SA8355: ring Ø55mm • SA8357: ring Ø57mm • SA8358: ring Ø58mm • SA8360: ring Ø60mm • SA8365: ring Ø65mm

9 10

Other diameters : contact us

11 269

WHEEL BALANCERS/TYRE CHANGERS WHEEL BALANCER NEW

1 2 3 4

5 6

EQ 6521 SET OF 4 CONES Ø42-140mm Ø40mm

EQ 8421 SET OF 3 CONES INTENSIVE USE Ø40-98mm Ø40mm Contents: SA8408: centering cone Ø40-62mm Ø40mm SA8409: centering cone Ø54-81mm Ø40mm SA8410: centering cone Ø70-98mm Ø40mm

SA 8410 CENTERING CONE INTENSIVE USE Ø70-98mm Ø40mm

SA 8310 CENTERING CONE INTENSIVE USE Ø70-98mm Ø38mm

SA 8370 CENTERING CONE INTENSIVE USE Ø70-98mm Ø36mm

SA 8309 CENTERING CONE INTENSIVE USE Ø54-81mm Ø38mm

SA 8369 CENTERING CONE INTENSIVE USE Ø54-81mm Ø36mm

For EQ 1000/EQ 2000/EQ 3000/EQ 8403

SA 8409 CENTERING CONE INTENSIVE USE Ø54-81mm Ø40mm For EQ 1000/EQ 2000/EQ 3000/EQ 8403

SA 8408 CENTERING CONE INTENSIVE USE Ø40-62mm Ø40mm

SA 8308 CENTERING CONE INTENSIVE USE Ø40-62mm Ø38mm

SA 8368 CENTERING CONE INTENSIVE USE Ø40-62mm Ø36mm

SA 7849 CENTERING CONE SUV INTENSIVE USE Ø95-137mm Ø40mm

SA 8389 CENTERING CONE SUV INTENSIVE USE Ø95-137mm Ø38mm

SA 8371 CENTERING CONE SUV INTENSIVE USE Ø95-137mm Ø36mm

For EQ 1000/EQ 2000/EQ 3000

For EQ 1000/EQ 2000/EQ 3000/EQ 8403

8 9 10 11 270

EQ 8091 CENTERING CONE VU INTENSIVE USE Ø118-174mm WITH SPACER DISK Ø40mm

WHEEL BALANCERS/TYRE CHANGERS WHEEL BALANCER NEW

OC 8034 TYREPLIERS

SA 8207 5 SHORT FIXCONES BICONICAL Ø10x1.5mm

1 2

SA 8209 SET OF 5 FIXCONES CONICAL WITH ROUND HEAD Ø10x1.5mm

SA 8208 5 LONG FIXCONES FOR ALU RIMS Ø10x1.5mm

3 4

SA 8305 RIM WIDTH CALIPER

SA 8905 CALIBRATION WEIGHT 50g

For EQ 1000/EQ 2000/EQ 3000

6 7 EQ 1634 MOTO KIT+Ø14mm SHAFT+CONES Ø16-34mm+RINGS 16mm For EQ 1000/EQ 2000/EQ 3000

8 9

SA 1634 DEPORT EXTENSION FOR MOTO KIT For EQ 1634

10 11 271

WHEEL BALANCERS/TYRE CHANGERS WHEEL BALANCER NEW

1 2 3 4

5 6 7 8 9 10 11 272

TABLE OF CORRESPONDANCES WHEEL BALANCERS AND ACCESSORIES QUICK NUT

DIAMETER THREADING

ASSEMBLY

UNIVERSAL QUICK FLANGE

EQ 8404 EQ 6404

40x4

Cylindrical

EQ 9400 EQ 6400

EQ 1000/EQ 2000/EQ 3000

CLAS Equipements

EQ 7285

28,5x3,5

Cylindrical

EQ 9280

B 945/B 995

Balco/John Bean

EQ 8403

40x3

Cylindrical

EQ 9400

B 940

Balco/John Bean

EQ 8404 EQ 6404

40x4

Cylindrical

EQ 9400

B 9400/B 9450/B 9455/B 920/B 9460/B 9100

Balco/John Bean

EQ 8403

40x3

Conic

EQ 9440

Complete range

Beissbarth

EQ 8403

40x3

Conic

EQ 9440

Complete range

Bosch

EQ 8404 EQ 6404

40x4

Cylindrical

EQ 9400 EQ 6400

Original Shaft

Butler/Space

EQ 8403

40x3

Cylindrical

EQ 9400

EQ 8404 EQ 6404

40x4

Cylindrical

EQ 9400 EQ 6400 EQ 9360

MODEL

Haweka Shaft Version complete hub (C32)

BRANDS

Butler/Space Cemb News > 2005

EQ 8363

36x3

Cylindrical

Shaft version

Cemb Old < 2005

EQ 8403

40x3

Cylindrical

With spacer of backwardation

Corghi News > 2006

EQ 8383

38x3

Cylindrical

With spacer of backwardation

Corghi Old < 2006

EQ 8363

36x3

Cylindrical

EQ 9360

Complete range

Dunlop

EQ 8403

40x3

Conic

EQ 9440

Complete range

Facom

EQ 8383

38x3

Cylindrical

EQ 9380

Complete range

Faip/Fasep

EQ 8403

40x3

Cylindrical

EQ 9400

Complete range

Fmc

EQ 8403

40x3

Conic

EQ 9440

Complete range

Fog

EQ 8403

40x3

Conic

EQ 9440

complete range

GÃ©odina

EQ 8363

36x3

Cylindrical

EQ 9360

Complet range except S 448

GS/Giuliano

EQ 8404 EQ 6404

40x4

Cylindrical

S 448

Giuliano

EQ 8404 EQ 6404

40x4

Conic

EQ 9440

Range manual tightening

Hofmann

EQ 8363

36x3

Cylindrical

EQ 9360

1st and 3eme generation

Launch

EQ 8403

40x3

Cylindical

EQ 9400

2eme and last generation

Launch

EQ 7283

28,5x3

Cylindrical

EQ 9280

Original range

Mondolfo Ferro

EQ 8403

40x3

Cylindrical

EQ 9400

Haweka range

Mondolfo Ferro

EQ 8403

40x3

Cylindrical

EQ 9400

1611/1626/1138/1639/1690/ 1627/1636/3607

Muller (Actia)

EQ 8403

40x3

Cylindrical

EQ 9400

EQ 8404 EQ 6404

40x4

Cylindrical

EQ 9400

Nussbaum Original Shaft

Rava News > 2005

EQ 8403

40x3

Cylindrical

EQ 9400

Haweka Shaft

Rava News > 2005

EQ 8363

36x3

Cylindrical

EQ 9360

Complete range

Rava Old < 2005

EQ 8403

40x3

Conic

EQ 9440

Complete range

Schenk

EQ 8403

40x3

Conic

EQ 9440

Complete range

Sicam

EQ 8383

38x3

Cylindrical

EQ 9380

Complete range

Sice

Complete range

EQ 8403

40x3

Cylindrical

EQ 9400

EQ 8383

38x3

Cylindrical

EQ 9380

Teco News

EQ 8363

36x3

Cylindrical

EQ 9360

Teco Old

EQ 8404 EQ 6404

40x4

Cylindrical

EQ 9400

Tip Top

EQ 8403

40x3

Conic

EQ 9440

Complete range

Sun

Werther

LIFTING & PRESSES

CONTENTS

1 EXTRACTION

2 3 4 5

6 7 8 9 10 11 274

PRESSES

PRESS ACCESSORIES CRANES

ENGINE

PIT JACKS

JACK STANDS

JACKS

275 282 283 284 286 287 288 289

OM 3412 GEAR AND BEARING PULLER/SPLITTER SET

LIFTING & PRESSES EXTRACTION

2 3

OM 3423 HYDRAULIC GEAR PULLER SET 10T Max.

Composition : • SA3423 :1 hydraulic spindle with 10T and centering pin • Various puller legs 100-150-200mm • Bearing separator up to Ø105mm • Various yokes 2 & 3 legs • Various extensions

4 5

6 7 8 9 10 11 275

LIFTING & PRESSES EXTRACTION

OH 0327 CV JOINT HYDRAULIC PUSHER Max.

OH 0323 CV JOINT PUSHER

Universal 3.4.5 hole plate, used with the vehicle studs. Plate Ø: 130x62mm

Øplate : 150x74mm

3 Composition : • 1 hydraulic pressure bolt (8T force) • 1 mounting plate (3,4 and 5 hole wheels) • Lock washers

4 5

6 7

OM 0648 THREAD TAPPING SET Ideal for restoring damaged CV threads. Composition: 24x1.50, 24x2.00, 22x1.50 3/4-20, 13/16-20, 20x1.25, 20x1.50

OM 9208 MULTI-BRAND HUB PULLER (LV & CV)

• • • • •

4 extraction screw M12x1.5 4 extraction screw M14x1.5 1 mechanical spindle Disc Ø90 to 170mm 4.3kg slide hammer

Covers most light vehicles & vans (Jumpy, Iveco, Boxer, Master, Trafic, Ducato, Sprinter, etc) Compatibility information on demand.

8 9 10 11 276

SA 9205 4 PCES WHEEL BOLT SYSTEM (MALE/ FEMALE) M12x125

SA 9206 4 PCES WHEEL BOLT SYSTEM (MALE/MALE) M12x125

SA 9207 4 PCES WHEEL BOLT SYSTEM (MALE/FEMELLE) M12x150

For OM 9208

LIFTING & PRESSES EXTRACTION

OM 9202 BEARING CAGE EXTRACTOR KIT

1 2 3

NEW OM 3450 UNIVERSAL WHEEL HUB EXTRACTOR

OM 9388 SILENT-BLOCK UNIVERSAL EXTRACTION KIT

Composition: • 6 stepped end caps for cylinders: 34-36-38-40-42-4446-48-50-52-54-56-58-60-62-64-66-68-70-72mm • 4 threaded rods Ø10-12-14-16mm • 2 bearing

NEW

9 Stepped end caps and numbered cylinders for easy identification. REF

Designation

SA 9289

THREADED ROD M10x1.5

SA 9290

THREADED ROD M12x1.5

SA 9291

THREADED ROD M14x1.5

SA 9292

THREADED ROD M16x1.5

10 11 277

LIFTING & PRESSES EXTRACTION

OM 3615 10T BALL JOINT/SILENT-BLOCK REMOVER Max.

2 Compatible with OM2511/ OM2512/OM9287

3 Comes with rings for BMW E36

OM 9385 HYDRAULIC EXTRACTION SET

Max.

Composition: • hydraulic cylinder 18T with 3/8" adaptor • push spindle 10-12-14-16mm • fixing nut • 22 short bushes (40mm) • 22 long bushes (110mm) • plastic case • 1/4"-3/8" adaptor

6 7

OM 9386 HYDRAULIC PRESS TOOL SET Max.

Universal tool for silent-block, ball joint, sealing shaft.

9 10 11 278

Characteristics: • internal length (press frame): 290mm • internal width (press frame): 110mm • maximum load of press frame: 14T • maximum load of hydraulic cylinder: 18T

Composition: • press frame • hydraulic cylinder 18T with 3/8" adaptor • push spindle • fixing nut • 22 short bushes (40mm) • 22 long bushes (110mm) • plastic case • 1/4"-3/8" adaptor

OM 3517 BEARING INSTALLATION/EXTRACTION KIT

LIFTING & PRESSES EXTRACTION

NEW

Composition: • 9 adapters Ø55,5-59-62-65-66-71,5-73-78-84mm • 3 races Ø76-86-91mm • 3 thrust screw M12x1.25 • 3 thrust screw M12x1.5 • 3 thrust screw M14x1.5

OM 3430 WHEEL BEARING PULLER ON SITE PEUGEOT/CITROEN/RENAULT Applications: bearings from Ø65mm to Ø90mm

Time-saver: no removal of ABS sensors Characteristics: • 2 clutch rings • 1 clutch: outside Ø104mm, inner Ø84mm-90mm, height 85mm • 1 conical adapter ring: outside Ø99mm, inner Ø74mm, height 44mm • 1 clutch with ABS notches: outside Ø99mm, inner Ø74mm, height 44mm • 1 cylindrical adapter ring with ABS notches: outside Ø100mm, inner Ø84mm, height 53mm • 1 cylindrical adapter ring with ABS notches: outside Ø94mm, inner Ø88mm, height 44mm • Centring rings: 35-37-42-45-60-75mm • Pressure rings: 65-72-82-83mm • Extraction screw and M20 allen • Weight: 11,70kg

Optionnal ram OM9384 is suitable for bearings considerably stuck.

OM 3428 WHEEL BEARING PULLER ON SITE MERCEDES

Time-saver: no removal of ABS sensors

Characteristics: • 2 clutch rings • 1 clutch: outside Ø104mm, inner Ø90mm-93mm, height 85mm • 1 clutch with ABS notches: outside Ø104mm,inner Ø90-93mm, height 85mm • Centring rings: 42-45-49-50-54-60-80mm • Pressure rings: 66-70-73-75-79-83-84-85-87-88-90mm • Extraction screw and M20 allen • Weight: 15kg Applications: bearings from Ø66mm to Ø93mm Mercedes: 190(W201), Classe A (W168, W169), Classe B (W245, W124), Classe C (W202, W203), Classe E (W210), Classe M (W163, W164), Classe S (W639), Classe V (W639)

3 4 5

6 7

Optionnal ram OM9384 is suitable for bearings considerably stuck.

OM 3429 WHEEL BEARING PULLER ON SITE VAG Characteristics: • 4 clutch rings • 1 clutch: outside Ø104mm, inner Ø90mm89mm, height 85mm • 1 cylindrical adapter ring with ABS notches: outside Ø100mm,inner Ø84mm, height 53mm • Centring rings: 34-35-37-39-40-70-75-80mm • Pressure rings: 65-66-67-70-72-74-75-76-78-7980-81-82-83-85mm • Extraction screw and M20 allen • Weight: 13,2kg Optionnal ram OM9384 is suitable for bearings considerably stuck.

Time-saver: no removal of ABS sensors

Applications: bearings from Ø65mm to Ø85mm Audi : A3, A4, A4 Quattro, A6, A8, TT VW : Polo, Golf, Passat, Sharan Skoda : Fabia, Octavia Seat : Ibiza, Cordoba, Alhambra

8 9 10 11 279

LIFTING & PRESSES EXTRACTION

1 2 3 4 5

Hollow ram for extraction and replacement of silent-blocks, side shafts, crank shafts, wheel bearings.

OM 9384 18T HYDRAULIC EXTRACTOR Max.

Easy, without strain

For OM 3420/OM 3424/OM 3425/OM 3426/OM 3427/ OM 3428/OM 3429/OM 3430/OM 9387/OM 3417 Composition: • SA9384: 18T hydraulic extraction ram • SA9385: Threaded rod M10x1.5 • SA9386: Threaded rod M12x1.5 • SA9387: Threaded rod M14x1.5 • SA9388: Threaded rod M16x1.5 • SA4215: 1/4"-3/8" hydraulic adapter

OM 3420 NEW GENERATION BEARING INSTALLATION KIT This kit is specially designed for newer model VAGs where the locking clips is incorporated into the wheel bearing and cannot be separated from it.

Ø72mm

When replacing, it is essential to use the required clips-held semi-cups as well as the countercups. Attempting to replace these particular bearings without the right tools will cause the clip to break and consequently the new cup bearing to be damaged.

Ø66mm

Ø62mm

To use on the vehicle or with a press

6 7 8 9 10 11 280

OM 3424 WHEEL HUB BEARING TOOL SET HUB 2.1 Ø62-66mm Useful tool for GEN 2 wheel bearing VAG Ø62-66mm. This assembly of wheel bearing and drive flange cannot be separated. So as to replace this type of bearing without damage, it is mandatory to use the right tool.

- Quick assembly/disassembly, directly secured to the vehicle - Time savings: no need to remove damper, nor the suspension arm, and no camber adjustment on some vehicles

Models: Audi: A2 Seat: Cordoba, Arrosa, Ibiza Skoda: Fabia, Fabia Facelift VW: Fox, Lupo, Polo, Golf Hydraulic extractor OM9384 is suggested for highly seized bearings.

Useful tool for GEN 2 wheel bearing VAG Ø72mm. This assembly of wheel bearing and drive flange cannot be separated. So as to replace this type of bearing without damage, it is mandatory to use the right tool.

LIFTING & PRESSES EXTRACTION

OM 3425 WHEEL HUB BEARING TOOL SET HUB 2.1 Ø72mm

1 2

- Quick assembly/disassembly, directly secured to the vehicle - Time savings: no need to remove damper, nor the suspension arm, and no camber adjustment on some vehicles

Models: Audi: A1, A2 Seat: Cordoba, Ibiza Skoda: Fabia, Fabia Facelift, Roomster VW: Fox, Polo Hydraulic extractor OM9384 is suggested for highly seized bearings.

OM 3426 WHEEL HUB BEARING TOOL SET HUB 2.1 Ø78mm Useful tool for GEN 2 wheel bearing VAG Ø78mm. This assembly of wheel bearing and drive flange cannot be separated. So as to replace this type of bearing without damage, it is mandatory to use the right tool. Models: Ford: C-max, Focus Mazda: 3 Volvo: C 30, C 70, S 40, V 50

- Quick assembly/disassembly, directly secured to the vehicle

Hydraulic extractor OM9384 is suggested for highly seized bearings.

- Time savings: no need to remove damper, nor the suspension arm, and no camber adjustment on some vehicles

OM 3427 WHEEL HUB BEARING TOOL SET HUB 2.1 Ø85mm Models: VW : Touareg, Transporter T5

Useful tool for GEN 2 wheel bearing VAG Ø85mm. This assembly of wheel bearing and drive flange cannot be separated. So as to replace this type of bearing without damage, it is mandatory to use the right tool.

- Quick assembly/disassembly, directly secured to the vehicle - Time savings: no need to remove damper, nor the suspension arm, and no camber adjustment on some vehicles

Hydraulic extractor OM9384 is suggested for highly seized bearings.

4 5

6 7 8 9 10 11 281

LIFTING & PRESSES PRESSES

OH 0820 DUAL-CONTROL PRESS 20T SLINDING CYLINDER Max.

2 3 4

NEW

OH 0830 DUAL-CONTROL PRESS 30T SLINDING CYLINDER Max.

NEW

OH 0850 DUAL-CONTROL PRESS 50T SLINDING CYLINDER Max.

NEW

6 7

• Quick approach hydraulic pump • Chrome cylinder • Large manometer • Up and down the table is assisted by a winch • Handles for auto-centering the table Included V block support, punches kit and protective shield

8 9 10 11 282

REF

Capacité Capacity

A (mm)

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

H (mm)

Poids Weight

OH 0820

20T

1610

560

550

160

0 - 1000

190

895

130kg

OH 0830

30T

1840

700

550

160

0 - 1130

150

895

180kg

OH 0850

50T

1940

800

710

220

0 - 920

190

1320

300kg

OH 0821 20T PINCHER TOOLS Max.

NEW

Max.

50 For OH 0850

For OH 0820 Content: • 8 Puncher tools diamètre 10-12-16-18-20-22-2530mm • 1 Adaptor • 1 Plate • 1 Storing device

OH 0831 30T PINCHER TOOLS Max.

30 For OH 0830

OH 0851 50T PINCHER TOOLS

NEW

LIFTING & PRESSES PRESS ACCESSORIES NEW

Content: • 8 Puncher tools diamètre 10-12-16-18-20-22-2530mm • 1 Adaptor • 1 Plate • 1 Storing device

1 2

Content: • 8 Puncher tools diamètre 10-12-16-18-20-22-2530mm • 1 Adaptor • 1 Plate • 1 Storing device

SA 0700 PROTECTIVE PLEXIGLAS SHIELD

For OH 0920/OH 0930

This shield is designed to protect the operator against potential splinters when using an hydraulic press. It fits all the press tables until 20mm wide. Slidable mounting brackets allow to adapt the gap between the upper table and the lower table.

• Double fixing for 20mm wide tables (upper and lower) and frames. • Compatible with other press models • Micro-splinters proof plexiglas shield (680x440mm)

OM 9253 BEARING EXTRACTION KIT Reinforced-steel positioning blade with min gap 100mm, max gap 230mm

7 8

OH 0101 SHAFTS AND WASHERS PULLER Ø64mm/Ø66mm/Ø72mm

9 OM 3419 BEARING FORK SEAL INSTALLATION/EXTRACTION KIT Contents: • 50 kits Ø18 to Ø74mm • 1 cup support: 18mm • 1 extender: 220mm

10 11 283

LIFTING & PRESSES CRANES

OH 1000 MOBILE CRANE 1T Max.

4-position arm: 1000-800-500-300kg Double-acting pump

OH 1015 MOBILE CRANE 1,5T

Max.

1.5

4-position arm: 1500-1200-800-500kg Double-acting pump

3 4 5

6 7

Capacité Capacity

A (mm)

B (mm)

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

H (mm)

I (mm)

L (mm)

M (mm)

OH 1000

1750

1500

1550

1250

165

620

800

2520

2750

920

OH 1015

1,5T

1840

1690

1850

1400

195

430

720

2820

3220

880

REF

OH 1300 500kg HYDRAULIC LIFT TABLE Max.

500

Ideal for handling parts (boxes, engines, axles...)

8 9 10 11 284

Characteristics: • Deck dimensions : 1010x520mm • 2 fixed wheels and 2 swivelling brake wheels • H. mini: 440mm • H. maxi: 1575mm

N (mm)

Poids Weight

1020

750

100kg

1020

1000

180kg

LIFTING & PRESSES CRANES

OH 0335 1T LOW PROFILE FOLDABLE CRANE Max.

1 • • • • • •

Double acting pump 360° swivelling pump Deadman lowering control 3 positions arm: 1000-750-500kg Low profile: 85mm Nylon wheels

2 3

REF

Capacité Capacity

A (mm)

B (mm)

C (mm)

D1 (mm)

D2 (mm)

D3 (mm)

E (mm)

F (mm)

G (mm)

H (mm)

P1 (kg)

P2 (kg)

P3 (kg)

OH 0335

1380

1600

1085

245-2330

100-2415

0-2500

100

865

970

1000

750

500

OH 0338

1977

1290

230-2505

80-2630

0-2705

205

150

994

1158

2000

1700

1500

OH 0338 2T FOLDABLE CRANE Max.

2 • • • • •

Deadman lowering control Double acting pump 360° swivelling pump 3 positions arm: 2000-1700-1500kg Nylon wheels

7 OH 0238 LOAD BALANCER 680kg Max.

680

Width: 400mm

8 OM 0601 500kg ENGINE SUPPORT Max.

500

OH 0009 DRUM GRIP 350kg

Max.

350

360° swivel head Adapts to all engines 4 adjustable mounting points Dimensions: 800x864x935mm

11 285

LIFTING & PRESSES ENGINE

OM 7200 UNIVERSAL ENGINE SUPPORT LV-CV Max.

350

Can be used when the transmission jack, crane or the engine support cannot be used. Ex : 207, 307, commercial vehicles

Essential for working alone on gearboxes, water pumps, brake pads, etc.

3 4

copi

teles

• • • • •

Articulated head on ball joint 350kg Extensions 630-960mm Rubber covered Height adjustable Weight : 7.20kg

OH 0249 2 HOOKS SWIVELLING ENGINE SUPPORT

• Directional feet • 2 chain connections

NEW

1700mm 150mm

8 9 10

SA 0220 BALL BEARING KIT

OH 0243 SWIVELLING ENGINE SUPPORT NEW

1500mm

11 286

For OH 0233/OH 0239/OH 0243/OH 0249

Swivelling mounts are essential on vehicles with sloping bonnet design (206, Twingo, etc.). Width adjustable

150mm

LIFTING & PRESSES PIT JACKS OH 0263 PIT JACK 300kg

OH 0250 SWIVEL HEAD JACKS 600kg

Max.

300

Max.

600

• • • • •

Foot control Chromed rod Overload safety Command lower :type deadman 4 swivelling wheels

For OH 0266/OH 0263

OH 0266 PIT JACK 600kg

Max.

600

Bore Ø30mm maxi

• • • •

OH 0235 PIT JACK 1T Max.

• • • • •

Tray: 360x270mm Inclination (lateral and longitudinal): 45° Fitting: Ø30mm Chains lenght: 940mm

REF

Capacité Capacity

A (mm)

B (mm)

C (mm)

Poids Weight

OH 0263

300kg

1120

1890

800

23kg

OH 0266

600kg

1180

2000

800

34kg

OH 0235

1000kg

1140

1990

560

37kg

OH 0236

800kg

850

1870

480

49kg

OH 0237

1500kg

880

1900

700

58kg

Foot control Chromed rod Overload safety Deadman lowering control 4 swivelling wheels

4 5

6 7 8

OH 0236 2 STAGE PIT JACK 800kg

Max.

800

OH 0237 2 STAGE PIT JACK 1.5T Max.

1.5

10 11 287

LIFTING & PRESSES JACK STANDS

OM 3003 JACK STANDS 3T (x2) Max.

OM 3006 JACK STANDS 6T (x2) Max.

OM 2012 JACK STANDS 12T (x2) Max.

Characteristics: • H. mini: 480mm • H. maxi: 730mm

Characteristics: • H. mini: 400mm • H. maxi: 605mm

Characteristics: • H. mini: 295mm • H. maxi: 425mm

3 4 5

6 7 8 9 10 11 288

OM 2410 JACK STANDS 3T (x2) Max.

OM 2430 JACK STANDS 12T (x2)

Characteristics: • H. mini: 290mm • H. maxi: 433mm • Rubber base

Max.

Characteristics: • H. mini: 485mm • H. maxi: 750mm

OM 2420 JACK STANDS 6T (x2) Max.

Characteristics: • H. mini: 365mm • H. maxi: 565mm • Rubber base

OM 2013 PAIR TALL JACK STANDS 2T

OM 0681 HEIGHT ADJUSTABLE JACK STANDS 22T (x2) Max.

Max.

Characteristics: • H. mini: 1050mm • H. maxi: 1850mm

Characteristics: • H. mini: 310mm • H. maxi: 505mm • Weight: 13kg

OM 3021 JACK STANDS WITH SCREW 20T (x2) T Max.

Characteristics: • H. mini: 420mm • H. maxi: 680mm • Base: 315mm-330mm

NEW

OM 3023 JACK STANDS WITH SCREW HIGH ELEVATION (x2) T Max.

NEW

Characteristics : • H. mini: 665mm • H. maxi: 1170mm • Base: 315mm-330mm

OH 4272 20T HYDRO-PNEUMATIC BOTTLE JACK Max.

LIFTING & PRESSES JACKS

Dual-control jack : manual or pneumatic • • • •

H. mini: 247mm H. maxi: 477mm Dimensions : 215x185mm Weight: 17kg

2 3 4

OH 4102 2T DOUBLE RAM BOTTLE JACK Max.

• H. mini: 169mm • H. maxi: 388mm • Weight: 3.7kg

OH 4402 BOTTLE JACK 2T Max.

Max.

• H. mini: 160mm • H. maxi: 315mm • Weight: 2.2kg

OH 4412 BOTTLE JACK 12T Max.

OH 4404 BOTTLE JACK 4T

Max.

• H. mini: 180mm • H. maxi: 350mm • Weight: 2.9kg

OH 4420 BOTTLE JACK 20T Max.

• H. mini : 210mm • H. maxi : 416mm • Weight: 6.4kg

OH 4430 BOTTLE JACK 30T Max.

OH 4406 BOTTLE JACK 6T

• H. mini: 245mm • H. maxi: 467mm • Weight: 9.7kg

• H. mini: 285mm • H. maxi: 480mm • Weight: 13kg

• H. mini: 195mm • H. maxi: 389mm • Weight: 3.9kg

6 7 8 9 10 11 289

LIFTING & PRESSES JACKS

OP 0303 AIR/EXHAUST GAZ JACK Max.

2 3 4

Air exhaust gaz is universal and convenient for every type of vehicles. Can be inflated by exhaust or compressor. This lifting accessory is essential for sandy, muddy grounds and travelers. Made of reinforced nylon canvas (type zodiac) The air jack has to be placed under the vehicle frame, thereby using up the exhaust gas (up to over 75cm height), quickly and effortless. The air jack is very stable once inflated. The flexible hose has an inflating check valve (safety) and an exhaust cone which suits all kind of exhaust outputs. The cushion has an inflation valve which permits choosing inflation mode by the exhaust gas or compressor. • • • •

Ø650mm Height once inflated: 780mm Weight: 5.5kg Maximum load: 4T

6 7 8 9 10 11 290

Contents: • 1 cushion • SA0305: compressor adapter • SA0306: 6m exhaust hose with cone • SA0307: repair kit • 1 carry bag

LIFTING & PRESSES JACKS

OP 0206 PNEUMATIC FLOOR JACK 2T-2 STAGES Max.

• • • • •

Max pressure: 7bar Weight: 16kg Base: 240x240mm H. mini (without rubber pad and extension): 135mm H. maxi (without rubber pad and extension): 350mm

- Maintenance-free - Internal telescopic guide - Overload safety feature

2 3

OP 0451 EXTRA LONG HANDLE

4 Mounts instead of the handle in a few seconds. It helps, when access is difficult, to set up the jack in position thanks to its 2 casters. Commands are also deported facilitating use.

For OP 0206/OP 0306 • Lenght: 1110mm • Inclination: 0°-30°-80°

OP 0306 PNEUMATIC FLOOR JACK 2T-3 STAGES Max.

Characteristics: • Max pressure: 7bar • Weight: 17kg • Base: 240x240mm • H. mini (without rubber pad and extensions): 170mm • H. maxi (without rubber pad and extensions): 450mm

- Maintenance-free - Internal telescopic guide - Overload safety feature

8 9

OP 0450 50mm JACK PAD WITH RUBBER ON TOP

OP 0400 100mm JACK PAD WITH RUBBER ON TOP

For OP 0206/OP 0306

10 11 291

LIFTING & PRESSES JACKS

OH 5304 HYDRAULIC FLOOR JACK 2T 85mm Max.

Characteristics: • Rotatable saddle • Rugged chassis • Safety overload system • H. mini: 85mm • H. maxi: 381mm • Dimensions: 560x212x145mm • Weight: 12.6kg

3 4 5

OH 5311 HIGH ELEVATION HYDRAULIC FLOOR JACK 3T Max.

Characteristics: • Rotatable saddle • Rugged chassis • Safety overload system • H. mini: 192mm • H. maxi: 533mm • Dimensions: 635x255x192mm • Poids: 19kg

6 7 8 9 10 11 292

Telescopic head (+5cm)

OH 5306 SERVICE GARAGE JACK 2.25T Max.

2.25

Characteristics: • Rugged chassis • Metered release system for a precise load control • Safety overload system • Swivelling steel saddle • Swivelling rear casters • H. mini: 140mm • H. maxi: 490mm • Dimensions: 645x345x185mm • Weight: 29.5kg

SA 5391 PAIR OF FRONT WHEELS For OH 5306

SA 5392 PAIR OF REAR WHEELS For OH 5306

LIFTING & PRESSES JACKS

OH 5309 ALUMINIUM FLOOR JACK 1.25T 85mm Max.

1.25

Characteristics: • Rubber pad • Safety overload system • Handle foam • Swivelling rear casters • H. mini: 85mm • H. maxi: 375mm • Dimensions: 580x240x150mm • Weight: 11.5kg

Twin pump design

SA 5413 RUBBER PAD

Ultra light For OH 5309

SA 5411 PAIR OF FRONT WHEELS For OH 5309

SA 5412 PAIR OF REAR WHEELS For OH 5309

SA 5416 SADDLE For OH 5309

2.5 • • • • • • •

2 3 4 5

OH 6310 ALUMINIUM FLOOR JACK 2.5T 100mm Max.

Swivelling saddle Safety overload system White nylon casters H. mini: 100mm H. maxi: 460mm Dimensions: L.650xl.292xH.170mm Weight: 26.4kg

7 NEW

Fast lifting dual pump system

8 9 10 11 293

LIFTING & PRESSES JACKS

NEW

OH 6014 EXTRA LOW PROFILE SERVICE GARAGE JACK 2.5T 75mm Max.

2.5

• • • • • • • •

Foot pedal with rubber pad Safety overload system Swivelling saddle Nylon casters H. mini : 75mm H. maxi: 515mm Dimensions: L.722xl.328xH.150mm Weight: 33.5kg

Fast lifting dual pump system

4 5

OH 6015 GARAGE FLOOR JACK 3T 98mm Max.

3 • • • • • • •

Fast lifting dual pump system

7 8 9 10

NEW

Swivelling saddle Safety overload system Nylon casters H. mini: 98mm H. maxi: 535mm Dimensions: L.760xl.345xH.170mm Weight: 44kg

SA 5364 RUBBER PAD

OH 5303 GARAGE FLOOR JACK 3T Max.

For OH 5303

SA 5362 PAIR OF FRONT WHEELS For OH 5303

SA 5363 PAIR OF REAR WHEELS

Characteristics: • Foot pedal design • Wide stance frame for better stability • Automatic safety valve prevents jack from overload • Front and rear polyurethane casters • Swivelling saddle • H. mini:145mm • H. maxi: 475mm • Weight: 35.5kg • Dimensions: L.672xl.341xH.180mm

For OH 5303

SA 5367 METAL SADDLE

11 294

For OH 5303

Handle locking device

LIFTING & PRESSES JACKS

OH 6020 EXTRA LOW PROFILE SERVICE GARAGE JACK 2T 76mm Max.

2 • • • • • • • •

Foot pedal with rubber pad Safety overload system Swivelling saddle Double nylon front casters H. mini: 76mm H. maxi: 510mm Dimensions: L.1006xl.365xH.136mm Weight: 42kg

NEW

Deadman lowering control

1 2 3

Magnetic base

4 5

OH 6030 EXTRA LOW PROFILE SERVICE GARAGE JACK 3T 80mm Max.

3 • • • • • • • •

Deadman lowering control

6 7

Safety overload system Foot pedal with rubber pad Swivelling saddle Double nylon front casters H. mini: 80mm H. maxi: 500mm Dimensions: L.822xl.420xH.232mm Weight: 50kg

8 9

NEW Magnetic base

10 11 295

LIFTING & PRESSES JACKS

OH 8030 TELESCOPIC AIR JACK 15-30T Max.

2 3

Characteristics: • Provides quick and effortless lifts • Safety overload system • 2 stages • Long T-handle let you easily position your jack under vehicle • H. mini: 150mm • H. maxi: 300mm • Extensions: 10-60-120mm • Air pressure: 7-10bar • Weight: 48kg

4 5

6 7

Dimensions REF

H0 (mm)

H1 (mm)

H2 (mm)

H3 (mm)

D (mm)

B (mm)

L (mm)

H (mm)

OH 8030

150

OH 8050

150

180

280

550

1500

190

290

690

1500

SA 8065 EXTENSIONS

SA 8067 PAIR OF WHEELS

For OH 8030/OH 8050

10-60-120mm

OH 8050 TELESCOPIC AIR JACK 10-25-50T Max.

9 10 11 296

Characteristics: • Provides quick and effortless lifts • Safety overload system • 3 stages • Long T-handle let you easily position your jack under vehicle • H. mini: 150mm • H. maxi: 367mm • Extensions: 10-60-120mm • Air pressure: 7-10bar • Weight: 65kg

LIFTING & PRESSES JACKS

OH 9020 AIR HYDRAULIC JACK 10-20T Max.

NEW

Ultra compact Extra light weight (15kg)

CE certified conformities : 93/44EEC EN1494 98/37/EEC 2006/42/EE

Characteristics: • Provides quick and effortless lifts • Safety overload system • 2 stages: 20T/10T • Equipped with a speed control descent system for enhanced security • Handle: 3 parts sectionable • Telescopic carrying handle • Fast connexion between the jack and the control flexible • Angular cutting of the chassis facilitates handling • Min Height: 140mm • Max Height: 306mm • Length: 440mm • Width: 230mm • Extensions: 16-60mm • Air pressure: 8-10bar • Weight: 15kg

Applications: Trucks, trailers, buses

3 4 5

6 7 8

SA 9020 PUMP JOINTS KIT

SA 9120 EXTENSION 16mm

For OH 9020

SA 9121 EXTENSION 60mm For OH 9020

SA 9561 CONTROL HOSE

SA 9037 RAM JOINTS KIT

SA 9530 HYDROPNEUMATIC PUMP

For OH 9020

9 10 11 297

LIFTING & PRESSES JACKS

OH 9030 HIGH LIFT AIR HYDRAULIC JACK 30T Max.

2 3 4

NEW

Applications: Civil engineering machinery, agricultural machinery, military machinery, trains CE Certified conformities: 93/44EEC EN1494 98/37/EEC 2006/42/EE

9 10 11 298

SA 9510 PAIR OF WHEELS Ø200mm For OH 9030

SA 9130 JACK PAD 120mm

SA 9140 JACK PAD 70mm

SA 9160 JACK PAD 12mm

For OH 9030/OH 9040/OH 9044/OH 9060/OH 9065

OH 9040 AIR HYDRAULIC JACK 20-40T Max.

Characteristics: • Provides quick and effortless lifts • Safety overload system • Equipped with a speed control descent system for enhanced security • Long T-handle to ease jack positioning under vehicle • 3 positions: 90-45-10° with metal locking system • Angular cutting of the chassis facilitates handling • Min Height: 350mm • Max Height: 580mm • Length: 725mm • Width: 275mm • Extensions: 12- 70mm-120mm • Air pressure: 8-10bar • Weight: 57kg

Holds full power in high rise

NEW

Characteristics: • Provides quick and effortless lifts • Safety overload system • 2 stages: 40T/ 20T • Equipped with a speed control descent system for enhanced security • Long T-handle to ease jack positioning under vehicle • 3 positions: 90-45-10° with metal locking system • Angular cutting of the chassis facilitates handling • Min Height: 150mm • Max Height: 228mm • Length : 525mm Ultra short chassis • Width : 300mm Wide application • Extensions : 12-70-120mm • Air pressure: 8-10bar • Weight: 39kg Applications: Trucks, trailers, buses, agricultural machinery, civil engineering machinery

SA 9500 PAIR OF WHEELS Ø160mm

SA 9531 HYDROPNEUMATIC PUMP

For OH 9040/OH 9044/OH 9060

For OH 9040

CE Certified conformities: 93/44EEC EN1494 98/37/EEC 2006/42/EE

LIFTING & PRESSES JACKS

OH 9060 AIR HYDRAULIC JACK 18-30-60T Max.

NEW Characteristics: • Provides quick and effortless lifts • Safety overload system • 3 stages: 60T/30T/18T • Equipped with a speed control descent system for enhanced security • Long T-handle to ease jack positioning under vehicle • 3 positions: 90-45-10° with metal locking system • Angular cutting of the chassis facilitates handling • Min Height: 150mm • Max Height : 335mm • Length: 730mm • Width: 300mm • Extensions: 12-70-120mm • Air pressure: 8-10 bar • Weight: 46kg

2 3

Applications: Trucks, trailers and buses CE Certified conformities: 93/44EEC EN1494 98/37/EEC 2006/42/EE

SA 9500 PAIR OF WHEELS Ø160mm

For OH 9040/OH 9044/OH 9060

OH 9065 AIR HYDRAULIC JACK 15-30-60T BUS 120mm Max.

Applications: Specific to buses and low chassis trucks

Characteristics: • Provides quick and effortless lifts • Safety overload system • 3 stages: 60T/30T/15T • Equipped with a speed control descent system for enhanced security • Long T-handle to ease jack positioning under vehicle • 3 positions: 90-45-10° with metal locking system • Angular cutting of the chassis facilitates handling • Min Height: 120mm • Max Height: 260mm • Length: 660mm Low profile • Width: 300mm Short chassis • Extensions: 12-70-120mm • Air pressure: 8-10bar • Weight: 50kg

SA 9535 HYDROPNEUMATIC PUMP

SA 9520 PAIR OF WHEELS Ø130mm

For OH 9065

SA 9065 PUMP JOINTS KIT

SA 9066 RAM JOINTS KIT

For OH 9065

NEW

CE Certified conformities: 93/44EEC EN1494 98/37/EEC 2006/42/EE

6 7 8 9 10 11 299

LIFTING & PRESSES JACKS

OH 9044 LEGNTHY AIR HYDRAULIC JACK 8-14-22-32-44T BUS 10mm Max.

2 3 4

NEW

Characteristics: • Provides quick and effortless lifts • Safety overload system • 5 stages: 44T/32T/22T/14T/ 8T • Equipped with a speed control descent system for enhanced security • Long T-handle to ease jack positioning under vehicle • 3 positions: 90-45-10° with metal locking system • Angular cutting of the chassis facilitates handling • Min Height: 100mm • Max Height: 260mm • Length: 1000mm • Width: 350mm • Extensions: 12-70-120mm • Air pressure: 8-10bar • Weight: 63kg

Ultra small height

Specific to buses and Low chassis trucks

SA 9500 PAIR OF WHEELS Ø160mm For OH 9040/OH 9044/OH 9060

6 7 8 9 10 11 300

CE Certified conformities: 93/44EEC EN1494 98/37/EEC 2006/42/EE

SA 9130 JACK PAD 120mm

SA 9140 JACK PAD 70mm

SA 9160 JACK PAD 12mm

For OH 9030/OH 9040/OH 9044/OH 9060/OH 9065

SA 9510 PAIR OF WHEELS Ø200mm

SA 9535 HYDROPNEUMATIC PUMP

SA 9531 HYDROPNEUMATIC PUMP

For OH 9030

For OH 9065

For OH 9040

SA 9520 PAIR OF WHEELS Ø130mm

SA 9065 PUMP JOINTS KIT

SA 9066 RAM JOINTS KIT

For OH 9065

SA 9020 PUMP JOINTS KIT

SA 9120 EXTENSION 16mm

For OH 9020

SA 9121 EXTENSION 60mm For OH 9020

SA 9561 CONTROL HOSE

SA 9037 RAM JOINTS KIT

SA 9530 HYDROPNEUMATIC PUMP

For OH 9020

LIFTING & PRESSES JACKS

OH 5355 LONG CHASSIS SERVICE JACK 5T L.1505mm Max.

Characteristics: • H. mini: 150mm • H. maxi: 560mm • Poids: 87kg

2 OH 5360 LONG CHASSIS SERVICE JACK 10T L.1637mm Max.

Characteristics: • H. mini: 160mm • H. maxi: 560mm • Poids: 129kg

4 Dimensions

E F G H J L K Long. manche A (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) Handle lenght

REF

Ø roues avant Front wheel Ø

Ø roues arrière Rear caster Ø

OH 5355 1505

200

290

364

245

130

1155mm

111mm

70mm

OH 5360 1637

250

333

490

245

150

1155mm

141mm

90mm

OH 9150 HYDROPNEUMATIC MOBILE LIFTING COLUMN 1500kg Max.

1500

Mobile and practical.

NEW

OH0014:Air hydraulic pump 10T • • • • •

2 handlegrip and 2 swivel wheels to ease handling Safety pin : 5 secure heights Lifting by the wheel or the car body Dimensions: L.94xl.71xH.126.5cm Weight: 112kg

8 9 10

SA9152: Lifting by the car body Max working height: 835mm Minimum height: 140mm

SA9151: Lifting by the wheel Max working height: 735mm Min height: 100mm Wheel diameter from 480 to 730mm

11 301

LIFTING & PRESSES JACKS

EG 0142 RUBBER PAD 146x23

EG 0135 RUBBER PAD 160x28

Outer diameter 146mm Inner diameter 110mm Height 23mm Hole Ø12mm Rubber SBR 75° SHORE A

Outer diameter 160mm Inner diameter 138mm Height 28mm Rubber SBR 75° SHORE A

EG 0144 RUBBER PAD 147x25

EG 0139 RUBBER PAD 120x26

Outer diameter 147mm Inner diameter 135mm Height 25mm

Outer diameter 120mm Inner diameter 108 & 110mm Height 26mm

Thermoplastic rubber forprene 80° SHORE A

Rubber SBR 75° SHORE A

EG 0141 RUBBER PAD 121x26.5 Outer diameter 121mm Inner diameter 106 & 111mm Height 26.5mm

6 7 8

EG 0136 RECTANGULAR RUBBER PAD 180x100x60

10 11 302

Outer diameter 100mm Inner diameter 80 & 93mm Height 22mm Rubber SBR 80° SHORE A

Rubber SBR 80° SHORE A

EG 0140 RUBBER PAD 100x22

EG 0137 RECTANGULAR RUBBER PAD 160x120x35 Rubber SBR 75° SHORE A

Rubber SBR 75° SHORE A

EG 0138 RECTANGULAR RUBBER PAD 160x120x20

EG 0143 RECTANGULAR RUBBER PAD 160x125x125

Rubber SBR 75° SHORE A

EG 0607 LV BLOCK L.105mm Height: 65mm

Rubber SBR 75° SHORE A

BODY REPAIR

CONTENTS

1 HANDLING

2 3

WELDING

STRAIGHTENING

PAINTING

4 5 6

OTHER

DOORS OPENING

PAINTLESS DENT REMOVAL

BLASTING

CLEANING

WINDSCREEN

9 10 11 304

PLASTIC

305 308 312 317 318 323 324 327 328 329 331

BODY REPAIR HANDLING

OC 6041 PARTS/WINDSCREEN/ COVERS DOLLY

1 75mm

• Independent, sliding, foam covered support bars • 5 modulable compartments to hold the parts in total safety • 2 of the wheels have brakes

m 00 12

0 76

Øwheels : 90mm

OC 6040 MULTIPURPOSE EASEL

OC 0780 RIM STAND

Max.

150

• Adjustable height (840 to 1230mm) and width (210 to 1600mm) • Foam strips on supports • Max. load 150kg • Foldable to save space

• • • •

OC 0717 BODYWORK SUPPORT

NEW

Suitable for 4 rims with tyres Adjustable height: 870-1050m Adjustable sliding handle stroke: 670mm Equipped with 2 swivelling wheels and 2 swivelling braked wheels

8 9 10 11 305

BODY REPAIR HANDLING

SA 2071 PAIR OF ROTATING WHEELS For OM 2018/OM 2021/OM 2024

OM 2024 VEHICLE DOLLY CASTER SYSTEM 1360kg (PAIR) 1360

SA 2072 PAIR OF ROTATING WHEELS WITH BRAKE

Max.

For OM 2024

• • • •

3 4 5

SA 2074 PAIR OF ALUMINIUM ROLLER

Hydraulic ram Aluminium roller L.300mm 4 casters, 2 with lock Capacity : 2720kg (4 jacks)

For OM 2018/OM 2021/OM 2024

OM 2018 MOBILE SUPPORTS 1134kg Max.

1134

• GOJAK • Capacity: 2268kg (on 4 pieces of equipment) • Highly resistant PVC wheels

SA 5315 PEDAL

For OM 2018/OM 2019

8 9

SA 5305 CASTOR WHEEL

Dimensions (mm) A

EØ

OM 2024

305

345

540

625

100

190

560

OM 2018

230

370

615

610

100

150

545

For OM 2018

OC 1200 TROLLEY BLOCKED UNDER CAR BODY Max.

450

height 350mm

SA 7061 DOLLY WHEEL

Articulated buffers For OC 1200/OC 1101/OC 1102

width 600mm from 1150 to 1800mm

11 306

OH 9150 HYDROPNEUMATIC MOBILE LIFTING COLUMN 1500kg

BODY REPAIR HANDLING

Max.

1500

Mobile and practical.

• • • • •

NEW

2 3

2 handlegrip and 2 swivel wheels to ease handling Safety pin : 5 secure heights Lifting by the wheel or the car body Dimensions: L.94xl.71xH.126.5cm Weight: 112kg

4 5 6

SA9152: Lifting by the car body Max working height: 835mm Minimum height: 140mm

SA9151: Lifting by the wheel Max working height: 735mm Min height: 100mm Wheel diameter from 480 to 730mm

8 9

OH0014:Air hydraulic pump 10T

10 11 307

BODY REPAIR WELDING

1 2

Comes with accessories : triangle, washers, screws, nozzles

OC 0216 SPOT REPAIRER (PINHOLES) Characteristics: Welding parameters Power-time regulator Thermal protection indicator Regulator: single-point, pulsatingpoint, and continuous

Technical datas: • Input voltage : Volt 50-60Hz (AC)-1Phx230 • Delayed fusible : 16 amperes • Installation power: 4kW • Open circuit voltage: 7.4V • Duty cycle: 3.5% • Dimensions: 320x181x265mm • Weight: 20kg • Welding current range: 400-2200 amperes • Cable lenght: 2000+3000mm

OC 0217 ARC WELDER FOR 1.6 Amp 4mm ELECTRODE

Characteristics: DC: works with both DC and AC current. Lets you weld various types of metal using various electrodes. TIG: Materials that can be welded: stainless steel, copper, nickel, etc. 0.5mm thick+. HOT START: booster Kick-starts the arc. Very useful for electrodes that are difficult to start. NON-STICK: eliminates the inconvenience of the electrode sticking to the piece. Prevents electrode overload and keeps it intact. FORCED ARC: increases amperage when the welding arc is kept «short». Increases penetration by the electrode and improves the mechanical characteristics of the weld.

5 6

Consumables, contact us.

OC 0218 MIG WELDER

Characteristics: Manual continuous welder (2-step) Thermostatic protection ON/OFF switch to disconnect the welder without changing the power settings Welder on wheels

10 11 308

Technical datas: • Input voltage: Volt 50-60Hz (AC)-1Phx230 • Delayed fusible: 16 amperes • Installation power: 3.5kW • Open circuit voltage: 75V • Welding current range: 5-160 amperes (AR-CO2) • Duty cycle: 1.6-4.0 amperes • 100 to 60%: 160 to 20%-115 to 60% amperes • 80 to 100%: 30x130x170mm • Welding positions: 4 • Dimensions: 410x710x540mm • Weight: 39kg

Technical datas: • Input voltage : Volt 50-60Hz (AC)-1Phx230 • Delayed fusible : 16 ampères • Installation power: 3.5kW • Open circuit voltage: 75V • Welding current range: 5-160 ampères • Usable electrode: Ø1.6-4.0mm • Duty cycle: 160 to 20%-115 to 60% • Dimensions: 30x130x170mm • Weight: 4kg

BODY REPAIR WELDING

OC 0220 CONNECTABLE PLASMA CUTTER (WITHOUT COMPRESSOR)

Characteristics: Cuts all electrically conductive metals: steel, stainless steel, aluminium, bronze, brass. Low power consumption Unaggressive steady cutting arc Operating indicators: • power on • thermostatic protection • air pressure Torch comes with a SAFETY SYSTEM

Technical datas: • Input voltage: Volt 50-60Hz (AC)-1Phx230 • Delayed fusible: 20 amperes • Installation power: 4kW • Open circuit voltage: 480V • Cutting current: 5 to 35 amperes • Duty cycle: 35 to 30%-22 to 60%-15 to 100% • Max cutting thick steel: 12mm • Air pressure: 3.5 to 5bar • Air consumption: 100l/min • Dimensions: 362x173x264mm • Weight: 8.8kg

SA 2220 2 DIFFUSERS TO SPREAD PLASMA OC0220 AND OC0222

3 4

SA 2223 4 NOZZLE SUPPORTS TO DIRECT SPRAY OC0220

For OC 0220/OC 0222

For OC 0220

OC 0222 INTEGRATED PLASMA CUTTER COMPRESSOR Characteristics: Cuts all electrically conductive metals: steel, stainless steel, aluminium, bronze, brass. Low power consumption Unaggressive steady cutting arc

OC 2220 LIQUID CRYSTAL (LCD) PROTECTIVE AUTOMATIC MASK

SA 2222 4 NOZZLE SUPPORTS TO SPREAD SPRAY OC0222 For OC 0222

Technical datas: • Input voltage: Volt 50-60Hz (AC)-1Phx230 • Delayed fusible: 20 amperes • Installation power: 4kW • Open circuit voltage: 480V • Cutting current: 5 to 35 amperes • Duty cycle: 35 to 30%-22 to 60%-15 to 100% • Max cutting thick steel: 12mm • Air pressure: 3.5 to 5bar • Air consumption: internal compressor • Dimensions: 325x170x430mm • Weight: 13.4kg

EG 0056 WIRE BRUSH

Operating indicators: • power on • thermostatic protection • air pressure

Torch comes with a SAFETY SYSTEM

Handy wire brush ideal for a multitude of uses. • Carbon steel wire • Soft grip handle

11 309

BODY REPAIR WELDING

1 2

EG 0047 GAS REFILL

EG 0050 PORTABLE GAS SOLDERING IRON Solder up to 500°C 4-position adjustment

Supplied with 4 tips After-use support

SA 0811 100g TIN For EG 0050/OE 0811

3 4

OE 0811 SOLDERING IRON 30W WITH STAND 1100

This soldering iron is ideal for a multitude of work. The high quality tips are suitable for lead-free soldering. SA0811: 100g tin

The station comes with sponge for cleaning the tips, an additional tip (plated 3mm) and tin (600mm, Ø1.5mm). The work stand has two crocodile clips for holding electronic boards. Weight: 560g

7 8

OC 6047 DENT PULLER FOR BODY DETAILING

OE 1224 OVERLOAD CIRCUIT BREAKER 12-24V This device protects the vehicle electronically from overload.

For OC 0216

9 700mm

10 11 310

80mm 80mm

Connect the two alligator clips to the battery. If the LED lights up, the device is connected correctly and is ready to use.

BODY REPAIR WELDING

OC 0021 WELDING GUN 1.5

Contents: • 10 welding wires • 1 magnetic base • 1 extractor 4 hooks • 1 special wire electrode • 1 hook • 1 jet spot • 1 percussion hammer • 7 electrodes • 1 small hook for washers • 50 nails 2x50 • 50 nails 2.5x50 • 100 rivets • 100 washers Ø16 • 100 screws 4x15

It lets you use welding wire to help you work.

SA 4011 PACK OF 500 NAILS 2X50mm

SA 4013 PACK OF 50 WASHERS 16mm

For OC 0021

SA 4010 PACK OF 5O SEALING HEMP

2 3

SA 4012 PACK OF 500 NAILS 2.5X50mm For OC 0021

SA 4018 PACK OF 20 BRAKE PADS For OC 0021

OE 0600 INDUCTION HEATER 4 Induction heater uses high frequency magnetic fields to heat up metal objects like bolts, bearings, pulley's etc.

5 6

7 8 9 10

Power 1380W

Content: • Induction central unit with 4m cable • Tube coil Ø25mm, lenght 135mm • Tube coil Ø40mm, lenght 200mm • Flexible coil lenght 600mm

• Bearing coil lenght 1000mm • Round pad Ø75mm, lenght 250mm • Plastic case

11 311

BODY REPAIR STRAIGHTENING

1 2 3

Characteristics: • Speed: 800tr/min • For reamer: Ø6.3/8.3/10.3x47mm • Length: 349mm • Noise level: 84dB • Connection: 1/4" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight: 2.5kg

OP 1460 SPOT DRILL Quiet. Low speed/high torque. Orientable locking jaws. Ergonomic handle. Swivelling connector. Bottom exhaust.

SA 1460 EDGE CUTTER TUNGSTEN CARBIDE 8.3x47mm

OC 0025 BODYWORK PLIERS

For OP 1460

Air riveter OP 1475 see p. 320

Model equipped with a swivelling head to punch (Ø5mm) and fold (12mm) sheet steels before weld.

For sheet steel 1,4mm maxi.

OM 8069 PACK 16 VISE GRIP PLIERS

7 8

3 x OM8082

OM 8081 LOCK PLIER 190mm

5 x OM8080

3 x OM8083

OM 8082 LOCK PLIER 285mm Removable jaws

9 10 OM 8080

LOCK PLIER 225mm

11 312

OM 8083 LOCK PLIER 240mm

For U and angles

OM8082x3 OM8080x5 OM8083x3 OM8081x5

BODY REPAIR STRAIGHTENING

OC 0608 DOUBLE SUCTION CUP Max.

1 Suction strength 60kg

Ø90mm small suction cup

Ø160mm large suction cup

OC 0822 CONTENTS OF POLYCARBONATE BLOCK Contents: • 1 pencil chisel L.360xW.60xH.45mm • 1 split chisel 2mm L.270xW.40xH.20mm • 1 two-sided chisel L.275xW.92xH.13mm • 1 single sided chisel L.275xW.93xH.13mm • 1 curved blade L.245xW.53xH.max 48mm • 1 claw set L.60xW.72xH.40mm • 1 claw set L.120xW.72xH.40mm • 1 rail set L.67xW.74xH.70mm • 1 square head set 65mm • 1 American set L.188xW.48xH.max 30mm/H.min 10mm • 1 tabletop set with 2 sided tool L.175xW.65xH.45mm • 1 claw set L.135xW.62xH.max 45mm/H.min 10mm

OC 0810 HAMMER + BLOCK SET

OC 2211 BODYWORK SLIDE HAMMER SET

Hammer 4.5kg Stroke 50cm Handle with guard Pigsfoot end Long curved hook 6cm Short curved hook 4cm

3 4 5 6

Contents: 2 hammers with GENUINE HICKORY handles length 20cm • flattening hammer • cornering hammer • ball peen hammer 4 polished steel blocks • Claw • Carbide • Rail • Comma

• • • • • •

• • • • •

90° hook U 90° hook flat Straight end Screwed end Chain end

7 8 9 10 11 313

BODY REPAIR STRAIGHTENING

SA 0805 4T HYDRAULIC RAM Max.

Max.

• • • • •

For OC 0801

SA 0806 4T 1/4" HYDRAULIC HAND PUMP

OC 0801 4T COLLISION REPAIR SET

Max.

Plastic case 4T ram 1/2 spreader Quick lock 4 extensions: 100200-300-400mm

For OC 0801

Comes without hose

3 4 5

SA 0801 MALE HYDRAULIC ADAPTER

SA 0804 SPREADER Max.

For OC 0801/OC 0802

OC 0802 10T COLLISION REPAIR SET 10

500

For OC 0801/OC 0802

Comes without male quick connect

• • • • •

Plastic case with casters 10T ram 1/2 spreader Quick lock 4 extensions: 100-200-300-400mm

SA 0807 10T HYDRAULIC RAM Max.

SA 0802 HOSE 1/4" For OC 0801/OC 0802/OH 0014

Max.

SA 0803 HYDRAULIC FEMALE ADAPTER

For OC 0802

SA 0808 10T 1/4" HYDRAULIC HAND PUMP Max.

For OC 0802/OM 9385/SA 9384/SA 9382

Comes without hose

OH 0014 AIR HYDRAULIC PUMP 10T 1/4" Max.

9 10 11 314

OC 0705 BODYWORK CYLINDER SET PUSHER/PULLER 1/4"

For OC 0801/OC 0802/OC 0703/OC 0705/OH 0010/OM 9385/OM 9387 • • • • •

700bar Aluminium reservoir Internal load limiting device Exhaust muffler Hose not included

Composition: • SA0704: 1 pusher cylinder 2T H. mini 132mm/H. maxi 189mm • SA0706: 1 pusher cylinder 4T H. mini 275mm/H. maxi 405mm • SA0703: 1 mini puller cylinder 4T H. mini 42mm/H. maxi 58mm • SA0705: 1 mini puller cylinder 10T H. mini 132mm/H. maxi 189mm • SA0707: 1 pusher cylinder 10T H. mini 350mm/H. maxi 500mm • SA0708: 1 puller cylinder 2T L. maxi 550mm/L. mini 422mm • 1 puller cylinder 5T L. maxi 650mm/L. mini 520mm

BODY REPAIR STRAIGHTENING

OC 0703 CYLINDER SET 5T EXTRA FLAT 32mm 3/8" Max.

With a range of magnetic shims, can be used from 32mm to 108mm

Cylinder travel: 6mm

3/8" adapter

H (mm) : 32 6,35 12,7 25,4 31,75

OH 0010 PUSH CYLINDER SET 10T DOUBLE TYRE 3/8" Max.

Contents: • 1x10T cylinder height 88mm travel 38mm • 3 aluminium connectors H.25-50-75mm • 1 metal soleplate 10mm

3/8" adapter

5 6

SA 4215 1/4"-3/8" HYDRAULIC ADAPTOR

For OC 0703/OC 0705/OC 0801/OC 0802/OH 0010/OH 0014/OM 9385/OM 9386/OH 1000

OC 9008 KEVLAR REINFORCED STRAIGHTENING CUSHIONS Max.

2.5

This pneumatic system allows you to straighten bodywork parts. The inflatable cushions can be slid into door panels, tailgates and doublewalled elements. Made of vulcanized, Kevlar fibre-reinforced rubber, these straightening cushions are very resistant to constraints and tears.

9 10

Composition: • 3 straightening balls: 100x120mm-straightening capacity: 50mm-strength 500kg/6bar 200x150mm-straightening capacity: 85mm-strength 1500kg/6bar 250x200mm-straightening capacity: 110mm-strength 2500kg/6bar • Safety valve inflator and deflator gun • Steel squares to straighten edges

11 315

BODY REPAIR STRAIGHTENING

1 2 3

AC 4221 DIGITAL THERMO-HYGROMETER This device is an accurate thermo-hygrometer allowing to measure the relative air humidity and the surrounding temperature. It is energy economical, and is endowed with a safe functioning, datahold function, spare-part, maximum and minimum memory, reset of maximal/minimal temperature... and has several other functions. This parameter is really important in the field of meteorology, air conditioning, many industries and leisure activities, as well as for the drying of the painting or any chemicals which can differ according to air humidity rate.

Characteristics: • LCD screen • Measurement range: Temperature: 0°C/+50°C (32°F/122°F) Relative air humidity: 0%/100% • Sampling Fraction: 1 time/second • Response time: Measurement of the relative air humidity: approximately 4 seconds Temperature measurement: 5/30 seconds • Battery: 4x1.5V, AA or equivalent • Working Temperature Range: 0°C/+50°C • Data-Hold Temperature Range: -10°C/+60°C • Low Battery Indicator on the screen • Dimensions: 230x 84x 43mm • Weight : Approx. 260g (battery included)

OP 3501 DRYING GUN

• • • • • • •

Compressed air venturi system Airflow regulator Max flow 6bar Consumption 350L/min Noise level in dB: 72dB at 3.5bar Service pressure 2 to 4bar Dust filters

OP 3510 2 DRYING GUNS + BASES

OP 3520 4 DRYING GUNS + 2 BASES

9 10 11 316

• • • • •

Ideal for drying tops and bottoms of vehicles Fully adjustable base max 2.08m Power supply via spiral hose Fast connectors 2 guns can be up to 0.85m apart

BODY REPAIR PAINTING

OP 1336 MINI PROFESSIONAL SPRAY GUN HVLP 125

HVLP gravity gun for retouching and finishing.

• • • • •

Excellent spread and spray Ergonomic, easy to hold Ø0.8mm nozzle Filter Service pressure: 1 to 2bar

2 3

OP 1335 HVLP PROFESSIONAL SPRAY GUN 600

HVLP gravity gun for bodywork and finishing work. • • • • • •

Excellent spread and spray Reworked ergonomics to make it more comfortable to handle Stainless steel nozzle, brushed aluminium body Ø2mm Polyamide tub 600ml Filter Service pressure: 1 to 2bar

SA 1312 Ø1.2mm NOZZLE 1

For OP 1335

Supplied with Ø2mm nozzle

SA 1314 Ø1.4mm NOZZLE

SA 1320 Ø2mm NOZZLE

SA 1316 Ø1.6mm NOZZLE

For OP 1335

OC 0013 PAIR OF STEPS

7 8

Max.

150

9 Large-size: Max. wheelbase : L.1470xl.690mm Max height : 710mm Tray : 950x320mm Small-size: Max. wheelbase: L.1270xl.570mm Max. height: 485mm Tray : 950x320mm

10 11 317

BODY REPAIR OTHER

1 2 3 4

SA 1210 METAL BRUSH Ø23mm

OP 1210 MULTI-SERVICE BRUSH

For OP 1210

Light. Safety guard. Grip handle + auxiliary handle. Use with gum or brush. Safety throttle. Rear exhaust.

• • • • • • •

Speed: 3.500rpm Length: 280mm Noise level: 83dB Connection: 1/4" Supply pressure: 6.2bar Consumption: 110l/min Net weight: 1.2kg

Supplied with brush and support

OP 1203 MINI DIE GRINDER 6mm 25.000rpm

OP 1204 MINI DIE GRINDER Ø6mm 20,000rpm

Light. Grip handle. Safety throttle. Rear exhaust with silencer.

Light. Grip handle. Safety throttle. Rear exhaust with silencer. Speed regulator. Swivelling connector.

5 6

7 8 9 10 11 318

Characteristics: • Speed: 20.000rpm • Length: 188mm • Noise level: 79dB • Connection: 1/4" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight: 0.7kg

Characteristics: • Speed: 25.000rpm • Length: 159mm • Noise level: 77dB • Connection: 1/4" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight: 0.4kg

OP 1206 ANGLE GRINDER Ø125mm

OP 1214 REVERSIBLE DISK-SANDER

Powerful. Centrifugal regulator. Alu/composite housing. 9-position adjustable protective casing Reversible auxiliary handle. Fastchange disk. Rear exhaust.

Powerful. Composite housing. Reversing bar on both sides. Rear exhaust with silencer.

Characteristics: • Speed : 10.000rpm • Shank: M14 • Disk: 0.8mm à 6mm • Motor : 0.75cv • Length: 238mm • Noise Emissions : 83dB • Connection: 1/4" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight : 2.0kg

Characteristics: • Speed :16.000rpm • Pads : 75/100/125mm • Motor : 0.60cv • Length : 142mm • Noise level: 83dB • Connector : 3/8" • Supply pressure : 6.2bar • Consumption : 113l/min • Net weight : 1.0kg

BODY REPAIR OTHER

OP 1213 VERTICAL POLISHER Ø150mm Characteristics: • Speed: 3.500rpm • Pad: Ø150mm • Length: 165mm • Noise Emissions: 80dB

Composite body. Auxiliary handle. Lateral exhaust.

• • • •

Connector: 1/4" Supply pressure: 6.2bar Consommation: 110l/min Net weight: 1.0kg

OP 1428 MINI ORBITAL SANDER KIT Ø50-75mm

Characteristics: • Speed: 15.000rpm • Pad size: 75mm • Spindle thread: M6x100 • Air consumption: 170l/min • Lenght: 108mm • Weight: 640g

SA 1428 2" VELCRO SANDING PAD

Axle Ø 6mm

For OP 1428

OP 1429 3" MINI POLISHER KIT Ø75mm

Characteristics: • Speed: 3.200rpm • Pad size: 75mm • Spindle thread: M6x100 • Air consumption: 170l/min • Lenght: 115mm • Weight: 900g

SA 1429 3" VELCRO SANDING PAD For OP 1428/OP 1429

OP 1311 5mm RANDOM ORBITAL PALM SANDER Ø150mm Characteristics: • Speed : 12.000rpm • Orbit: 5mm • Pad: Ø150mm • Length: 196mm

• • • • •

Noise Emissions: 76dB Connector : 1/4" Pression d’alim : 6.2bar Consommation : 57l/min Net weight : 0.7kg

OP 1312 2.5mm RANDOM ORBITAL PALM SANDER Ø150mm NEW Characteristics: • Speed : 12.000rpm • Orbit: 2.5mm • Pad: Ø150mm • Length: 196mm

• • • • •

Noise Emissions: 76dB Connector : 1/4" Pression d’alim : 6.2bar Consommation : 57l/min Net weight : 0.7kg

Axle Ø 6mm

NEW

Black trigger : oil free

9 10 11 319

BODY REPAIR OTHER

OP 1475 AIR RIVETER KIT Characteristics: • Rivet capacity till 4.8mm depending of the nose piece • Traction power: 900kg • Consumption: 1.4 to 1.8l/min • Stroke lenght: 14mm • Nose pieces: 2.4-3.2-4-4.8mm • Air inlet: 1/4" • Air pressure: 6.2bar Supplied in case

2 3 4 5 6

OM 0749 HAND RIVETER Other pneumatic tools see p.360 • • • •

Handle sheathed with return spring Supplied with 4 nozzles Ø2.4-3.2-4.0-4.8mm Key for nozzles assembly Lenght: 270mm

OM 0480 PRO PLIERS FOR RIVETS & LOCKNUTS

Suitable for : • Rivets Ø2.4-3.2-4-4.8-6.4mm • Locknuts Ø4-5-6-8-10mm

7 8 9 10 11 320

AC 2013 DUAL LASER HEADLIGHT ADJUSTMENT DEVICE

• • • • • •

Optimized transport: Packing dimensions: W.60cmxL.80cmxH.50cm Gross weight: 22kg

Aluminium column in two pieces

BODY REPAIR OTHER OM 0800 SPLITTING CHISEL

OM 0807 CUTTING CHISELS

Splitting chisel-Chrome vanadium steel, resharpenable.

Length : 240mm Width : 26mm Thickness : 7mm

Standards : DIN 5463

Made in France

3 4

EG 5032 LETTER PUNCH SET DIN 8mm 27-PIECE

EG 5030 LETTER PUNCH SET DIN 10mm 27-PIECE

5 6

7 EG 5031 LETTER PUNCH SET DIN 10mm 9-PIECE

8 9

EG 5033 LETTER PUNCH SET DIN 8mm 9-PIECE

10 11 321

BODY REPAIR OTHER

OC 0050 FIR-TREE FIXINGS 340PCS ASSORTED BOX

This 340PCS set includes staples for LV, CV and HGV trims.

3 4

Trim fixings for Renault, Ford, GM, Mazda, Nissan, VW, Toyota, PSA.

OC 0038 CURVED PLIERS FOR TRIM CLIPS

OC 0033 TRIM CLIP PLIER

5 6

OC 8081 TOOL FOR REMOVING DOOR STAPLES

8 9 10 11 322

OC 8077 SET OF 3 COMPOSITE LEVERS

OC 8078 5 PCS NYLON TRIM REMOVAL SET

OC 1103 INFLATABLE CUSHION

Rigid PVC panel: makes insertion easier

For keeping pneumatically-operated doors open to make it easier to install windscreens.

Cushion dimensions: 155x165mm

BODY REPAIR DOORS OPENING

1 2

EG 0745 SLIP KNOT SEMI-RIGID ROD TO HOOK DOOR HANDLES 1.10m

3 4

1100

EG 0741 SEMI-RIGID ROD FOR DOOR HANDLES OR KEYS 0.9m 900

EG 0742 SEMI-RIGID ROD TO HOOK DOOR HANDLES OR KEYS 1.25m 1250

EG 0743 SEMI-RIGID ROD TO HOOK DOOR HANDLES OR KEYS 1.80m 1800

EG 0744 U-SHAPED SEMI-RIGID ROD TO HOOK DOOR HANDLES 1.50m 1500

5 6

7 8 9 10

OC 9000 DOOR OPENING KIT CAUTION For professionals only, item sold without any instructions manual

11 323

BODY REPAIR PAINTLESS DENT REMOVAL

OC 0112 AUTO DENT REPAIR KIT WITH SLIDE HAMMER

This kit is designed to repair the car bodies that suffered hail, or small dents, no need to repaint the part. The process consists in sticking plastic pulling tips with the gun and the glue especially made for bodywork, and to connect the inertial weight or the pulling lever and then have the painted sheet without damaging it. Then you can remove the pulling end with any cleaning solvent (not supplied) and the nylon chisel.

1.5

2 3 4

Content: • 1 inertial stainless steel hammer+pulling end • 1 pulling lever (DSP) to remove dents • SA4205: 1 glue gun 240V-200°C-30W • 8 glue sticks • 9 pulling tips of various diameters • 1 nylon chisel to remove the pulling tips • 1 bottle for solvent (empty) to remove the pulling tips • 1 strong PVC box

5 6

8 9 10 11 324

OE 1225 BODYWORK LAMP 5

Emits parallel beams, highlights bodywork deformations.

Mini inertial weight 1.5kg for unpainted dent pulling L.490mm

490mm

OC 8079 MINI SLIDE HAMMER

BODY REPAIR PAINTLESS DENT REMOVAL OC 0403 PACK OF 10 BLACK GLUE STICKS

OC 0406 PACK OF 10 WHITE GLUE STICKS

Rigid

OC 0405 PACK OF 10 AMBER GLUE STICKS

Intermediate

Flexible

Ø11mm

OC 0409 SET OF 20 FLEXIBLE PULLING ENDS Ø14-Ø20-Ø30mm

Ø11mm

OC 0402 SET OF 20 RIGID PULLING ENDS Ø14-Ø20-Ø25-Ø30mm

Ø11mm

2 3 4 5 6

EG 0021 WHITE WASHABLE MARKER FOR ALL SURFACES Water based washable paint marker

OC 0407 GLUE REMOVER SPRAY 400

• UV resistant • For all surfaces: metal, plastic, wood, glass, stone, foil... • Transparent body so you can immediately see how much paint is left • VOC less than 0.6% (Volatile Organic Compounds) • Complies with standard ASTM D436 (non toxic)

OC 8077 SET OF 3 COMPOSITE LEVERS

7 8 9 10 11 325

BODY REPAIR PAINTLESS DENT REMOVAL

OC 0210 MANUAL VACUUM DENT PULLER

Slide hammer for paintless dent removal

Characteristics: • Comes with 3 suction cups Ø75-Ø100-Ø125mm • 1 draw hook • Manual pump for venturi • Slide hammer weight : 1.22kg

2 3

Manual pump: do not require a pneumatic supply

OP 0205 PNEUMATIC PERCUSSION EXTRACTOR

2 vacuum cups Ø120 and Ø155mm

5 6

Bodywork lamp p. 324

OC 8100 SET OF 14 BODYWORK RODS

Assortment of 14 auto body work rods not requiring paint. Ideal for pushing out hailstone marks, small dents on a door and other marks. Delivered in a carrying bag.

8 9

SA 8001 SET OF 4 ENDS For OC 8100

10 11 326

Rod lengths: 350mm 700mm 900mm 750mm 750mm

700mm

750mm

300mm 280mm 300mm 300mm

300mm 450mm

BODY REPAIR BLASTING

Storage unit with compartments for letters and numbers.

OP 0048 GLASS ENGRAVING GUN

Contents: • 1 set of 5mm letters and numbers • 1 support for positioning letters or numbers • 1 special pneumatic gun • 1 tin of sand for glass

SA 6805 ENGRAVING GUN

For OP 0048

SA 6806 TUB OF ABRASIVE 1KG

SA 6807 STENCIL KIT (numbers+letter+panel)

For OP 0048 For OP 0048

OP 0615 HIGH-FLOW SANDING GUN (ceramic nozzle)

SA 6616 CERAMIC NOZZLE For high-flow sandblasters (nozzle Ø5mm)

3 Pneumatic sandblaster with ceramic nozzle

For OP 0615

• • • •

SA 6615 DRUM OF SYNTHETIC SAND 30kg

Extraction hose 3m Service pressure: 6 to 8bar Air consumption: 500L/min To be used with sand drum SA6615

OP 0617 HIGH-FLOW SANDING GUN (metal nozzle) 1.2

SA0617: Metal nozzle

For OP 0615/OP 0617/OP 0618

Synthetic sand 0.5 to 1mm grain (corundum type)

• Air consumption : 750L/min • Working pressure : 8bar • Hose length : 1.2m

7 8

OP 0618 MICROGRAIN PNEUMATIC SANDBLASTING BOOTH

45 0m

This sandblasting booth is ideal for microblasting average sized parts. Hooked up to the workshop’s air system, it allows you to blast abrasives for cleaning, restoring, and making parts look like new.

9 10

380mm

Characteristics: • Glazed access hatch • Hatch protective film • Neon interior light • Reinforced rubber handing gloves • Compatible with abrasives: microbead glass, corindon, shot, plastic media • Gun supplied with 4 ceramic nozzles

Consumables : contact us 590mm

11 327

BODY REPAIR CLEANING

OP 0022 CLEANING GUN 1000

• Cleans bodywork, wheels, dashboard, air vents, engine... and door jambs • Ultra-low consumption thanks to special vortex technology • Its vortex propulsion system gives it unbeatable results.

3 4

SA 6032 FULL ROTARY NOZZLE

SA 6033 BOWL AND CAP FOR CLEANING GUN 1000

For OP 0022

SA 6037 CONE

7 8

11 328

For OP 0022/OP 0024

2L can. To mix with water (25%).

OP 0024 CLEANING GUN EVOLUTION 1000

Use it on seats, air vents, gear shift, wheels, etc.

Encapsulated ball bearing Its 1L tank lets you use it without interruption. Weight 840g when empty. Easy to carry and small. Suitable with pure water or universal cleaner

9 10

For OP 0022

SA 6022 CLEANING SOLUTION

For OP 0022

SA 6036 GASKET KIT

OP 0044 PRO SPRAY GUN 1000

• • • • •

2 adjustable jets and air flow Nozzle L.300mm Nozzle Ø2mm Connector 1/4" Service pressure: 2 to 8bar

OP 1481 SANDBLASTING GUN 1000

For projection of soundproofing products, sealants and anti-rust.

Characteristics: • Nozzle Ø: 6mm • Working pressure: 8bar max • Air consumption: 100 to 150L/min • Weight : 480g

BODY REPAIR PLASTIC

OE 6047 HOT AIR GUN 50-650°C 2

1 2 • lcd dispay • Last temperature memorized • 5 options for airflow to 250 until 500l/ min • Heat constant control (protects against overheating and ensures a continuous job) • Handle for a comfortable job • Power: 2000W • Operating temperature range: 50-650°c • Wire lenght: 2m • Weight: 0.8kg

Supplied with: • 1 protective nozzle • 1 welding nozzle • 1 reduction nozzle • 1 reflective nozzle • 1 scraper

OC 6039 PLASTIC REPAIR KIT

Contents: • SA6042: 1 soldering iron with special brazing tip • SA6041: 10 reinforced polypropylene brazing sticks made of fibreglass and carbon fibre. • SA6040 : 2 stainless steel grilles (250x120mm) quality 18/10 • SA6088: 2 mini blade disks for preparation • 1 spray (125ml) of cleaner • SA 6039: 1 spray (400ml) of coolant • 1 pair of scissors • 1 brass brush

3 4 5 6

7 8 9 10 11 329

BODY REPAIR PLASTIC

The hot plastic repair technique is an effective way of reinforcing and repairing broken or cracked plastic parts (windscreens, headlamps, trim...).

OC 6048 HOT STAPLER

2 3 4

The electronic box has three temperature settings depending on the importance of the repair. Supplied with SA6048, SA6049 and SA6050 (3x100 staples) Staples width: 13mm

SA 6048 100 U-STAPLES Ø0.6mm

SA 6049 100 U-STAPLES Ø0.8mm

SA 6050 100 V-STAPLES Ø0.8mm

For OC 6048

5 6

7 8

Stainless steel

SA 6051 100 W-STAPLES Ø0.6mm

SA 6052 100 W-STAPLES Ø0.8mm

SA 6053 100 V-STAPLES Ø0.6mm

For OC 6048

OC 6058 CORDLESS HOT STAPLER

• • • •

Rechargeable stapler Charging time 2/4h Battery life 200 staples Choice of 2 power settings 14/10W

SA 6057 100 V-STAPLES For convex angles Stainless steel For OC 6058

SA 6057 100 V-STAPLES For concave angles Stainless steel For OC 6058

10 11 330

SA 6059 100 S-STAPLES Stainless steel For OC 6058

SA 6060 100 W-STAPLES Stainless steel For OC 6058

Supplied with 100 assorted staples: M, S, V, W (25 of each) and 4 sets of interchangeable pairs Staples width: 13mm

BODY REPAIR WINDSCREEN EG 0002 WINDSCREEN WASHER NOZZLE CLEANING TOOL

Characteristics: • Dimensions: 950mm with protective cap 870mm without protective cap • Tool diameter: 6mm • Cleening needle and scriber: Ø0.5mm • Needles lenght: 130mm

OC 0667 SET OF 6 BODYWORK SUCTION CUPS

Suction cups with pressure levers for holding lateral sticks, windscreen gaskets, etc, while gluing

4 5 6

OC 1710 UNIVERSAL WINDSCREEN WIPER EXTRACTOR

Contents: • 4 cage extractors Ø26-30mm/Ø31-35mm/ Ø36-40mm/Ø36-46mm, internal 45mm, hexagonal drive 12mm • 1 extractor with internal grips 18-40mm, internal 45mm, hexagonal drive 12mm

8 OC 1700 WINDSCREEN WIPER REMOVER

Lets you handle all supports with very effective force Small size

10 11 331

BODY REPAIR WINDSCREEN

OC 2203 WINDSCREEN REPAIR KIT

2 3

• • • • • • •

Contents: • SA4104: UV Lamp 12V rechargeable • OC2202: Repair resin 10ml • OC8064: Finish resin 5ml • SA4108: 1 polish • SA4109: 1 gel for suction cups • SA4105: 1 box UV sheets

4 SA 4106 INJECTOR SUPPORT TOOL

SA4107: 1 inspection lens 1 scraper SA4106: 1 injector support OC22052x2: injectors 1 box of 10 blades 1 brick 1 user guide

OC 2204 UNIVERSAL GEL FOR ATTACHING RAIN SENSOR/LIGHT SENSOR (single dose)

For OC 2203

SA 4104 UV LAMP

For OC 2203

OC 2205 INJECTER

OC 8064 FINISH RESIN 5ml

CONSUMABLES

For OC 2203

OC 8067 CARBIDE BIT Ø1mm

OC 2202 REPAIR RESIN 10ml 10

11 332

BODY REPAIR WINDSCREEN

OC 1920 LONG UTILITY KNIFE

1 2

300mm

OC 5305 BOX 10 TRAPEZOIDAL BLADES

For OC 1935

OC 1915 BOX 10 UNBREAKABLE BLADES OC 1925 RETRACTABLE UTILITY KNIFE OC 1916 BOX 10 BREAKABLE BLADES

4 5 6

Water based washable paint markers • • • • •

UV resistant For all surfaces: metal, plastic, wood, glass, stone, foil... Transparent body so you can immediately see how much paint is left VOC less than 0.6% (Volatile Organic Compounds) Complies with standard ASTM D436 (non toxic)

8 EG 0021 WHITE WASHABLE MARKER FOR ALL SURFACES

EG 0023 YELLOW WASHABLE MARKER FOR ALL SURFACES

EG 0022 RED WASHABLE MARKER FOR ALL SURFACES

EG 0024 GREEN WASHABLE MARKER FOR ALL SURFACES

9 10 11 333

BODY REPAIR WINDSCREEN

OC 0302 SCRAPER AND UTILITY KNIFE SET

OC 5301 BOX OF 10 BLADES 12mm

2 OC 5302 BOX OF 10 BLADES 16mm

3 4 5

OC 5303 BOX OF 10 BLADES 20mm

OC 0305 RETRACTABLE SCRAPER

7 8

OC 5304 BOX OF 10 BEVELLED BLADES 16mm

OC 0306 RECTRACTABLE SCRAPER + 100 BLADES

OC 0303 SLEEVED SCRAPER + 100 BLADES

OC 5497 PACK OF 100 SCRAPER BLADES

9 10 11 334

OC 0304 SCRAPER

BODY REPAIR WINDSCREEN

EG 0002 WINDSCREEN WASHER NOZZLE CLEANING TOOL

1 Characteristics: • Dimensions: 950mm with protective cap 870mm without protective cap • Tool diameter: 6mm • Cleening needle and scriber: Ø0.5mm • Needles lenght: 130mm

OP 0500 PNEUMATIC KNIFE

2 3

• Cuts using blade oscillation • 1 OP0557 blade included

4 5

OP 0535 RIGHT BLADE 35mm

For OP 0500

OP 0557 RIGHT BLADE 57mm For OP 0500

OP 0590 RIGHT BLADE 90mm For OP 0500

OP 0536 U-SHAPED BLADE 36mm OP 0508 SCRAPPER BLADE 8mm For OP 0500

For OP 0500

9 10 11 335

BODY REPAIR WINDSCREEN

1 2

OC 1500 2-HANDLE LINE CUTTER KIT Contents: • 2 quick-lock handles • 1 reel 22m braided line • 1 starting needle

OC 2900 PAIR OF PULLING HANDLES

Quick-lock handles

4 5 6

OC 3100 CUTTING WIRE 0.7mmx0.7mmx44m 44

OC 3401 TRIANGULAR WIRE 50m 50

OC 2100 SAWING WIRE 0.8mmx0.8mmx44m 44

7 8

OC 0501 ROPE INSERTION TOOL 6 insertion rope lenght: 6m

9 10 11 336

OC 0502 GASKET ROLLER TOOL A selection of ends lets you insert the gasket.

OC 0301 SET OF 100 WINDSCREEN PREPARATION TOOLS

BODY REPAIR WINDSCREEN OC 0200 HAND CUTTER Supplied with 25mm blade

OC 7019 BOX OF 5 BLADES 19mm

1 2

OC 7038 BOX OF 5 BLADES 38mm

OC 7025 BOX OF 5 BLADES 25mm

3 4 5

OC 6000 WIRE GUIDE

OC 4100 T-HANDLE WIRE THREADER

OC 4300 WINDSCREEN LINE INSERTER

OC 4500 HOLLOW STARTING NEEDLE

7 8 9 10 11 337

BODY REPAIR WINDSCREEN

1 2

OC 6500 ONE-MAN WINDSCREEN RATCHETED REMOVAL KIT This tool has been certified by a large number of car makers

3 This kit consist of 2 pumped suction cups on a frame that attaches to a ratcheted cable hoisting system with a pivot on each suction cup to ensure proper adherence to the windscreen. This technique has the advantage of letting you cut out the windscreen gasket without removing the interior trim. It allows a single operator to remove the windscreen without physical effort.

4 5 6

7 8 9 10 11 338

OC 1401 ONE-MAN WINDSCREEN REMOVAL KIT Central suction cup with spring-loaded return lever mounted on swivelling arm.

Contents: • OC1399: 1 suction cup • SA4103: 1 reel spring • OC2100: 1 reel 22m braided line • OC4500: 1 starting needle • OC2900: 2 pulling handles

OC 1409 KIT OF 4 WINDSCREEN PROTECTORS

BODY REPAIR WINDSCREEN

AC 5007 LEAK DETECTOR

The ultrasound detector is composed of 2 elements: the transmitter and the receiver. It works by transmitting and receiving specific ultrasound frequencies that cannot penetrate glass or metal and thereby can detect air, dust and water leaks.

How to use : • Connect the transmitter to the vehicle’s cigarette lighter. Check that the LED is lit.. • Place the transmitter inside the vehicle, near the suspected leak. • Close the windows and doors and take the receiver. • Connect the earphones to the receiver. • Press the switch (down) and hold it down. Move the receiver along the suspected area. The sound signal intensifies as it approaches the leak and the LED on the receiver changes from green to red to indicate the place where the leak is.

OC 0719 GASKETED WINDSCREEN SERVICING KIT

3 OC 0718 GLUED WINDSCREEN SERVICING KIT

4 5

Supplied in a case, tool-shaped inner

Supplied in a case, tool-shaped inner Contents: • AC5007: 1 ultrasound leak detector • OC0302: 1 scraper kit • OC0502: 1 gasket roller tool • OC0501: 1 rope insertion kit • OC0304: 1 scraper • OC5497: 1 box of 100 blades

Contents: • OC1920: • OC1916: • OC4100: • OC2100: • OC2100:

Composition: • Amplifier 176x84x35mm • Ultrasonic transmitter 170x84x36mm • Headphones • Alu stethoscope probe 250mm • Plastic amplifier tube 270mm • Carrying case

1 1 1 1 1

cutter box of blades rope-inserted reel braided line reel square line

• • • • •

• OC2900: 1 pair of handles • OC0200: 1 windscreen cutter • OC7019-OC7025-OC7038: 3 boxes of blades • OC1700: 1 windscreen wiper arm remover

Can be operated with 2x9V batteries (6f22 type) Response frequency: 36000Hz to 44000Hz Operating temperature: 0°C to 40°C Storage temperature: -10°C to 50°C Weight: amplifier 183g/tansmitter 156g

7 8 9 10 11 339

BODY REPAIR WINDSCREEN

This arm with 2 suction cups lets you keep the windscreen in place in total safety. With a suction cup on the front windscreen of vehicle, the telescopic arm lets the operator work alone on the windscreen.. Suitable for cars, 4x4s, vans.

OC 1720 WINDSCREEN INSTALLATION AND REMOVAL ARM

2 3 4

OC 0666 HANDLE-PUMP SUCTION CUP Ø165mm Max.

5 Ø165mm

7 8 9 10 11 340

OC 0662 PUMP SUCTION CUP HGV Ø254mm CAPACITY 140kg

OC 0665 MINI SUCTION CUP Ø50mm

Max.

140

Vacuum pump with brass piston

Ideal for installing and removing small windows or rear view mirrors.

BODY REPAIR WINDSCREEN

OC 0600 PAIR OF SUCTION CUPS Max.

120

Essential for positioning and gluing newgeneration windscreens.. Suction cups Ø120mm • Swappable suction cups to suit various glass contours • Level lock • Carrying handle • Supplied with fast-ratchet sling

2 Sling length 5m

OC 0611 PAIR OF SUCTION CUPS Ø140mm Max.

120

4 Suction cup Ø140mm

OC 6041 PARTS/WINDSCREEN/COVERS DOLLY

6 75mm

• Independent, sliding, foam covered support bars • 5 modulable compartments to hold the parts in total safety • 2 of the wheels have brakes

Øwheels : 90mm

OC 0713 ADJUSTALBE BODYWORK EASEL WITH TOOL HOLDER

OC 0714 BODYWORK HOLDER

1200mm

8 9

Tool holder 3-position setting

1000mm

660mm

10 11 341

BODY REPAIR WINDSCREEN

OP 5060 PNEUMATIC GUN FOR 370ml CARTRIDGES AND BAGS

For silicons, glues, putties application with 310ml cartridges and 300,400 and 600ml bags.

• Aluminium body and ring • Total lenght: 370mm • Air pressure inlet regulator from 4 to 8bar (10bar maximum) with 1/4" connection • Valve strenght: 160kgf to 8bar • Progressive trigger to enable speed control

4 5

• • • •

Lenght: 470mm Height: 270mm Sound level: 80dB Weight: 1100g

OC 5060 CARTRIDGE AND BAGS GUN 380mm PROFESSIONAL • Aluminium body and ring • Total lenght: 380mm • Ergonomic grip handle

For silicons, glues, putties application with 310ml cartridges and 300,400 and 600ml bags. Comes with plastic spout

OC 5070 CARTRIDGE AND BAGS GUN

SA 5065 10 PLASTIC SPOUTS

8 9 10 11 342

Comes with plastic spout

For OC 5060/OC 5070/OP 5060

OP 5061 AIR CAULKING GUN For silicons, glues, putties application with cartridges 310ml,400ml.

• • • • • •

Aluminium body Total lenght: 325mm 1/4" connection Supply pressure: 5bar Progressive trigger to enable speed control Weight: 1300g

NEW

REELS

CONTENTS

1 ELECTRICAL

2 3 4 5 6 7

8 9 10 11 344

WIRED LIGHTING

AIR

OIL - GREASE

OTHER

345 346 348 353 354

REELS ELECTRICAL

OE 0052 WORKSHOP CABLE REEL 3x1.5mm2 20m

• ABS drum • Maximum strength: 2300W (unrolled cable) 1000W (unrolled cable) • IP rating : IP44 • Thermal circuit breaker • 3 conductors 1.5mm • Cable HO7 RN-F-20m

3 4

Waterproof plug

INDUSTRIAL REELS All cable reels are supplied with uninstalled easy-to-install cable lock device.

Swivelling support for attaching Cable-guide mouth Power terminals on side Amperage collector 10A with double earth contact Degree of protection IP42 Service temperature -5°/+40° The cable reel lock lets you lock the reel with it unrolled partially or completely : useful if unrolling manually

Ref.

1,5

25+2

OE 0400

25+2

OE OE OE OE

1,5 3 2,5

1,5 4 2,5

1,5 5 2,5

OE 0400 OE 0401 OE 0402 OE 0403 OE 0404

20+2 20+2 17+2

0401 0402 0403 0404

18+2

OE 0405 OE 0406 OE 0407

13+2

OE 0408

20+2

OE OE OE OE

25+2 16+2

15+2 15+2 10+2

0409 0410 0411 0412

(20°)

1,1 1,1

1,1 230V

Rolled cable lenght

1,1

2,0

1,1

2,0

2,0 400V

Cable section mm2

230V

Cables

400V

• • • • • • •

1,1 2,0

6 Cable diameter mm

Thermal protection

V max

Cable type

7,5

500

H05 VV-F

8,5

500

H05 VV-F

750

H07 RN-F

500

H05 VV-F

750

H07 RN-F

9,5

500

H05 VV-F

750

H07 RN-F

500

H05 VV-F

750

H07 RN-F

10,5

500

H05 VV-F H07 RN-F

750

12,5

500

H05 VV-F

750

H07 RN-F

OE 0405

OE 0409

OE 0406

OE 0410

OE 0407

OE 0411

OE 0408

OE 0412

8 9 10 11 345

REELS WIRED LIGHTING

OE 1360 NEON PORTABLE LIGHT CABLE REEL

OE 1317 PORTABLE CAGE LIGHT CABLE REEL

24V

2 12-24-220V

3 4 5 6

CABLE WINDER • Shock-resistant ABS case • Backstop pawl every 50cm • Swivelling mounting bracket • Cable: H05 RN-F-15m • Power supply cable: 1 m • IP rating: IP42 PORTABLE LIGHT • Ergonomic grip in Moplen: Hydrocarbon, acid and solvent resistant • Strong-built switch • Steel-thread cage and zinc-plated steel reflector • Swivelling hook • IP rating : IP20 • E27 bulb cap 60W maxi (not supplied)

CABLE WINDER • Shock-resistant ABS case • Backstop pawl every 50cm • Swivelling mounting bracket • Cable: H05 RN-F-15m • Power supply cable: 1m • IP rating: IP42 PORTABLE LIGHT • 900 lumens • Ergonomic grip: Hydrocarbon resistant • Integrated waterproof switch • SA1360: Bell cover+swivelling hook • IP rating : IP55 • OE0085: Neon 11W

Option: 4 other colours available

8 9 10 11 346

Option: 4 other colours available

OE 1361 PORTABLE LIGHT TRANSFORMER CABLE REEL 15

Transformer 220-24V

CABLE WINDER • Shock-resistant ABS case • Backstop pawl every 50cm • Swivelling mounting bracket • Cable: H05 RN-F-15m • Power supply cable: 1 m • IP rating: IP42 PORTABLE LIGHT • Ergonomic grip: Hydrocarbon resistant • Integrated waterproof switch • SA1360: Bell cover+swivelling hook • IP rating : IP55 • OE0085: Neon 11W

This reel includes a 220/24V transformer which allows the use of a low voltage powered work light (24V) as recommanded by security rules Option: 4 other colours available

REELS WIRED LIGHTING

OE 1314 PORTABLE NEON LIGHT CABLE REEL

CABLE WINDER • Shock-resistant ABS case • Backstop pawl every 50cm • Swivelling mounting bracket • Cable: H05 RN-F-15m • Power supply cable: 1m • IP rating: IP42

PORTABLE LIGHT • 900 lumens • Ergonomic grip: Hydrocarbon resistant • Integrated waterproof switch • SA1360: Bell cover+swivelling hook • IP rating: IP55 • OE0085: Neon 11W

3 4 Option: 4 other colours available

OE 1315 PORTABLE LED LIGHT CABLE REEL 30

CABLE WINDER • Shock-resistant ABS case • Backstop pawl every 50cm • Swivelling mounting bracket • Cable: H05 RN-F-15m • Power supply cable: 1m • IP rating: IP42

PORTABLE LIGHT • 150 lumens • IP rating: IP55 • Ultra compact • Energy saving • Electronic control board in the grip • Standards EN 60598-2-8 CEI 598-2-9

Option: 4 other colours available

SA 1310 220V PLATE

SA 1361 24V PLATE

SA 1360 GLASS COVER WITH HOOK

SA 1362 LOCK FOR GLASS COVER

For OE 1314

For OE 1360/OE 1361

For OE 1360/OE 1361/OE 1314

SA 0121 YELLOW FLASK

SA 0122 BLACK FLASK

SA 0123 RED FLASK

SA 0124 GREEN FLASK

For OE 1317/OE 1360/OE 1324/OE 1361/OE 1314/OE 1320/OP 0088

8 9 10 11 347

REELS AIR

1 2

OP 0083 METAL CASE REEL GREY Ø8mm 10 • • • • • • •

Stop device every 50cm Hose Øint. 8mm Length 10m Connector 1/4" Adjustable wall support 180° Tension by high-strength spring Pressure 8bar

Metal drum

3 4

OP 0082 METAL CASE REEL Ø8mm 10

• • • • • • •

Metal drum

Stop device every 50cm Hose Øint. 8mm Length 10m Connector 1/4" Adjustable wall support 180° Tension by high-strength spring Pressure 8bar

6 7

8 9 10 11 348

OP 0049 INFLATOR GUN

OP 0104 ADJUSTABLE POCKET BLOW GUN

For commercial vehicles and vans. Complies with directive 86/217/EEC UNI EN 12645

• • • • •

Graduations of 0.7 to 12bar

Pocket blow gun Belt clip Lenght: 115mm Opening/closing by rotation Anti-scratch

REELS AIR

OP 0088 AIR REEL Ø8mm 10 • • • •

Stop device every 50cm Hose Øint. 8mm Length 10m Connector 1/4"

• Adjustable wall support 180° • Tension by high-strength spring • Max pressure 15bar

ABS drum

2 3 4

Option: 4 other colours available Connectors see p.359

OP 1015 AIR REEL Ø8mm

16 • • • •

Stop device every 50cm Hose Øint. 8mm Length 16m Connector 1/4"

• Adjustable wall support 180° • Max pressure 15bar • Tension by high-strength spring

ABS drum

6 7

8 Option: 4 other colours available

SA 0021 PAIR OF YELLOW FLANGES

SA 0022 PAIR OF BLACK FLANGES

SA 0023 PAIR OF RED FLANGES

SA 0024 PAIR OF GREEN FLANGES

For OP 1015/OP 1017

9 10 11 349

REELS AIR

OP 1017 AIR REEL Ø10mm 16

ABS drum

2 3

• • • • • • •

Stop device every 50cm Hose Øint. 10mm Length 16m Connector 3/8" Adjustable wall support 180° Max pressure 15bar Tension by high-strength spring

4 Option: 4 other colours available

Connectors see p.359

6 7

8 9

OP 0176 ALU AIR REEL Ø10mm 16

• • • • • • •

Stop device every 50cm Hose Øint. 10mm Length 16m Connector 3/8" Adjustable wall support 180° Max pressure 15bar Tension by high-strength spring

Alu drum

10 11 350

Option: 4 other colours available

REELS AIR

OP 1226 HIGH PRESSURE AIR/WATER REEL Ø10mm 200bar 18

ABS drum ATEX certified

• Epoxy powder coated steel brackets • Automatic hose stopping system • Reinforced hose EN 857 1SC Nonmarking hose • Hose Øint. 10mm • Length 18m, 150°C • Max pressure 200bar • Connector 3/8"

1 2 3 4 5

OP 1020 AIR REEL Ø10mm 20 • • • • • •

Epoxy powder coated steel brackets Automatic hose stopping system KPU hose: double-layer hose, reinforced with high tenacity polyester Hose Øint. 10mm Max pressure 20bar Connector 3/8"

6 7

8 9 ABS drum ATEX certified

10 11 351

REELS AIR

1 2 3

OP 1528 AIR REEL HGV Ø13mm 20

• Epoxy powder coated steel brackets • Automatic hose stopping system • KPU hose: double-layer hose, reinforced with high tenacity polyester • Hose Øint. 13mm • Max pressure 20bar • Connector 1/2"

ABS drum ATEX certified

4 5 6

OP 1520 AIR REEL HGV Ø13mm 15 • Epoxy powder coated steel brackets • Automatic hose stopping system • KPU hose: double-layer hose, reinforced with high tenacity polyester • Hose Øint. 13mm • Max pressure 20bar • Connector 1/2"

8 9 10 11 352

ABS drum ATEX certified

HU 1315 OIL REEL Ø10mm 200bar

REELS OIL - GREASE

HU 0818 GREASE HOSE REEL Ø8mm 400bar

ABS drum

ABS drum ATEX certified

• • • • • • •

Epoxy powder coated steel brackets Automatic hose stopping system Reinforced hose EN 857 1SC Hose Øint. 10mm Length 15m, 150°C Max pressure 200bar Connector 3/8"

• Stop device every 50cm • Connector 1/4" zinced steel

5 6

A (mm)

B (mm)

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

H (mm)

186

140

196

226

120

450

425

460

HU 0614 DIGITAL OIL METER CONTROL VALVE

HU 0521 GREASE GUN HOSE CONNECTOR WITH SPECIAL 4-GRIP HEAD 500

8 9

This volumetric oil gun dispenses oil simply, quickly and automatically.

Characteristics: • Flow rate: 1-30l/min • Maximum pressure: 70bar • Precision: ±5% • Swivelling inch connector 1/2" • Flexible tip automatic drip L.250mm • 6V batteries included

• Aluminium alloy handle • Swivelling inlet connector • Filter, rigid end and nozzle nondrip semi-automatic • Hose L.500mm Ø16mm

10 11 353

REELS OTHER

310mm

OE 0501 REEL 1x6mm2 FOR EARTHING

Reel characteristics:. • The reel is not flameproof • IP42 • Nominal current : 20A • Insulation voltage : 2.5kV • Single pole cable 1x6mm2 H05V-F colour yellow/green • Stop device every 50cm

2 3

Anti-deflagration plier ATEX 94/9/CE

Clip characteristics:. • Clip for grounding contact in ll2GD Ex d iiC T6 Ex td A21 IP65 T85°C • In conformity with standard EN 60079-0, EN 60079-1, EN 61241-0, EN 61241-1 • In conformity with the directive ATEX 94/9/CE • Suitable for use in potentially explosive athmospheres in presence of llC group gaz and combustible dusts • Provided with reopening-anti-tearing system • Insulation voltage 3KV • Nominal current 10A • Weight 0.65kg • Clip opening 3-20mm • Clip size 250x110x35mm • Lenght: 14m

4 5 6

220mm

OE 0500 MINI REEL 1x6mm2 FOR EARTHING 6+1m

190mm

7 • 1x6mm2 cable • Stop device every 50cm

8 9 10 11 354

310mm

EG 0016 PIT PROTECTION COVER REEL 16m 16

ISO EN 12100-1 ISO EN 12100-2

290mm

PNEUMATIC TOOLS

CONTENTS

1 ACCESSORIES

2 3

TIGHTNESS/RELEASE

PRECISION TOOLS

DRILLING

4 5 6 7 8

9 10 11 356

CUTTING

BODY REPAIR

AIR COMPRESSSORS

357 360 364 366 368 370 376

PNEUMATIC TOOLS ACCESSORIES ROPEAN EU

SAFETY

7,2 7,4

4414

SAFETY

DIN EN

ISO

A ND A R D

A ND A RD

983

A ND A R D

RNATION TE

ISO

SAFETY

2 SAFETY

DIN EN

ISO

6150

4414

série B P R OFI L E

A ND A RD

983

A ND A R D

4 MORE

1-First translatory movement rearwards : immediate decompression 2- Second translatory movement forward : immediate disconnection CLAS connections comply with the international safety standards ISO 4414 and DIN EN 983.

The cylindrical monoblock construction in shockproof composite materials, associated with a metallic insert, allows to ensure longevity and reliability. Connections and disconnections are made immediately and effortlessly. The mechanism of waterproofness associated with tips, eliminates any leaks in coupled or uncoupled position.

RNATION TE

ISO

SAFETY

8 série B

DIN EN

ISO

6150

P R OFI L E

SAFETY

4414 ST

A ND A RD

Corrosion resistant Treated steel tip Respect for dimensions and tolerances Teflon pre-treated male threads

983

A ND A R D

9 10 11 357

PNEUMATIC TOOLS ACCESSORIES

OP 0420 VARIABLE BLOWGUN SCRATCH-PROOF BLUE METAL NOZZLE Ø3mm

Characteristics: Fluid: Air Brass insert: G1/4-F Weight: 110 g Adjust gradually: Blowing Nominal pressure:10bar Temperature: -15°C+70°C Construction: Composite Air flow 384L/min

3 4

110mm

OP 0410 VARIABLE BLOWGUN SCRATCH-PROOF BLUE Ø2mm

Ø3x6mm steel nozzle 110mm bent tube

59mm

Ø2x12mm composite nozzle 59mm bent tube

Characteristics: Fluid: Air Brass insert: G1/4-F Weight: 110 g Adjust gradually: Blowing Nominal pressure: 10 bar Temperature: -15°C+70°C Construction: Composite Air flow 250L/min

7 8

OP 0104 ADJUSTABLE POCKET BLOW GUN OP 0374 1/4" AIR HOSE SWIVEL CONNECTOR

9 10 11 358

NEW

• • • • •

Pocket blow gun Belt clip Lenght: 115mm Opening/closing by rotation Anti-scratch

OP 0375 1/4 AIR RECOIL HOSE 7.5

NEW

Connectors and threads standards

Male thread: G 1/8" = 9,6mm G 1/4" = 13mm G 3/8" = 16,5mm G 1/2" = 20,8mm G 3/4" = 26,3mm

FAST CONNECTORS

PNEUMATIC TOOLS ACCESSORIES

Female thread: G 1/8" = 8,75mm G 1/4" = 11,8mm G 3/8" = 15,25mm G 1/2" = 19mm G 3/4" = 24,5mm

IRP ENDS

FAST CONNECTOR FEMALE THREAD - 6mm

IRP ENDS FEMALE - 6mm

OP 0701

1/4" BSPx50m3/h

OP 0901

1/4" IRP FEMALE THREAD

OP 0702

3/8" BSPx50m3/h

OP 0902

3/8" IRP FEMALE THREAD

OP 0703

1/2" BSPx50m3/h

FAST CONNECTOR MALE THREAD - 6mm

IRP ENDS MALE - 6mm

OP 0704

1/4" BSPx50m3/h

OP 0903

MALE THREAD 1/4" IRP

OP 0705

3/8" BSPx50m3/h

OP 0904

MALE THREAD 3/8" IRP

OP 0706

1/2" BSPx50m3/h

FAST CONNECTOR FOR HOSES - 6mm

IRP ENDS MALE - 6mm

OP 0708

Ø8mmx50m3/h

OP 0906

IRP FOR HOSES Ø8mm

OP 0709

Ø10mmx50m3/h

OP 0907

IRP FOR HOSES Ø10mm

FAST CONNECTOR FEMALE THREAD - 8mm

OP 0908

FEMALE THREAD 1/4" IRP

3/8" BSPx50m3/h

OP 0909

FEMALE THREAD 3/8" IRP

OP 0711

1/2" BSPx50m3/h

OP 0910

FEMALE THREAD 1/2" IRP

IRP ENDS MALE - 8mm OP 0911

MALE THREAD 1/4" IRP

OP 0712

3/8" BSPx50m3/h

OP 0912

MALE THREAD 3/8" IRP

OP 0713

1/2" BSPx50m3/h

OP 0913

MALE THREAD 1/2" IRP

FAST CONNECTOR FOR HOSES - 8mm

IRP ENDS FOR HOSES - 8mm

OP 0715

Ø8mmx50m3/h

OP 0914

IRP FOR HOSES Ø8mm

OP 0716

Ø10mmx50m3/h

OP 0915

IRP FOR HOSES Ø10mm

OP 0916

IRP FOR HOSES Ø13mm

EUROPEAN PROFIL

OP 0717

1/4" BSPx88m3/h

OP 0718

3/8" BSPx88m3/h

OP 0719

1/2" BSPx88m3/h

CONNECTOR MALE THREAD - 7,2/7,4mm OP 0720

1/4" BSPx88m3/h

OP 0721

3/8" BSPx88m3/h

OP 0722

1/2" BSPx88m3/h

CONNECTOR THREAD FOR HOSES - 7,2/7,4mm

ERP ENDS FEMALE - 7.2mm OP 0917

6 7 8

ERP ENDS

CONNECTOR FEMALE THREAD - 7,2/7,4mm

IRP ENDS FEMALE - 8mm

OP 0710

FAST CONNECTOR MALE THREAD - 8mm

FEMALE THREAD 1/4 ERP

ERP ENDS MALE - 7.2mm OP 0918

MALE THREAD 1/4 ERP

ERP ENDS FOR HOSES - 7.2mm

OP 0723

Ø8mmx88m3/h

OP 0919

ERP FOR HOSES Ø8mm

OP 0724

Ø10mmx88m3/h

OP 0920

ERP FOR HOSES Ø10mm

11 359

PNEUMATIC TOOLS TIGHTNESS/RELEASE

Impact socket made of chrome-molybdenum steel for an easier access to hard-to-reach areas.

OM 7018 1/2" DRIVE SHAFT HEX IMPACT SOCKET SET Contents: • 10-11-12-13-14-15-16-17-19-21-22-24mm 1/2" D. impact sockets, lenght 70mm, max degree 30° • 1/2 D. extension, lenght 125mm

2 3 4 Complies with ISO 1174 and DIN 3121 standards.

OM 0043 1"x3/4" REDUCER

OM 0044 3/4"x1/2" REDUCER

OM 0045 1/2"x3/4" INCREASER

OM 0033 3/4"x1" INCREASER

6 7 8

OE 2007 400Nm RECHARGEABLE IMPACT WRENCH

SA 1218 CLEANER AND LUBRICANT FOR PNEUMATIC TOOLS 125

10 11 360

SA 6206 OILER

• • • •

Impact wrench square 1/2" Continuous battery life 2h Charge time 1h Power 400Nm

• Pulses 2600/min • Supplied in composite case with 1 charger and one 19.2V battery

OP 1512 MINI IMPACT WRENCH 1/2" 678Nm

Short lenght of 120mm

PNEUMATIC TOOLS TIGHTNESS/RELEASE

1 Ergonomic design for ease of use. • Light with aluminium motor crankcase • 3-position dimmer at the back • Double-hammer technology • Handle exhaust

NEW

Characteristics: Maximum torque: 678Nm Spinning speed: 11000rpm Vibration: 10m/s Sound level: 90dB Connection: 1/4" Suggested hose Ø: 10mm Pressure: 6bar Consumption: 113l/min Net weight: 1.58kg

2 3 4

OP 1501 IMPACT WRENCH 1/2" 1054Nm

NEW • • • • •

Light, composite motor housing 3-position regulator Double-hammer technology Swivelling connector Handle exhaust

For working on the chassis (hubs, wheels, cradles)

Characteristics: • Max torque: 1054Nm • Release torque: 746Nm • Speed: 9,000rpm • Length: 186mm • Noise level: 88dB • Connection: 1/4" • Suggested hose Ø: 10mm • Supply pressure: 6.2bar • Consumption: 125l/min • Net weight: 2.04kg

Powerful Light Composite motor housing 3-position regulator Lock/unlock hand toggle

For working on the chassis (hubs, wheels, cradles) of commercial vehicles

7 8

OP 1402 1/2" IMPACT WRENCH 1356Nm

• • • •

• Double-hammer technology • Swivelling connector • Handle exhaust Characteristics: • Max torque: 1356Nm • Release torque: 1054Nm • Speed: 7.000rpm • Length: 183mm • Noise level: 83dB • Connection: 1/4" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight: 1.9kg

9 10 11 361

PNEUMATIC TOOLS TIGHTNESS/RELEASE

1 2 3

OP 1405 3/4" IMPACT WRENCH 1898Nm

• Powerful • Light. Composite motor housing • 3-position regulator lock/unlock hand toggle • Double-hammer technology • Swivelling connector • Handle exhaust

Characteristics: • Max torque: 1898Nm • Release torque: 1627Nm • Speed: 5.500rpm • Length: 215mm • Noise level: 90dB • Connection: 3/8" • Supply pressure: 6.2bar • Consumption: 198l/min • Net weight: 3.3kg

4 5

OP 1465 TYRE RELEASER

Can be used on the vehicle. Saves time. Air regulator. Handle exhaust. Agricultural use.

6 7

Characteristics: • Travel : 80mm • Jaw opening : 68mm • Length: 380mm • Connection : 1/4" • Supply pressure : 6.2bar • Consumption: 113l/min • Net weight : 4.6kg

9 10 11 362

DM 0204 HGV/AGRICULTURAL VEHICLES HYDROPNEUMATIC BEAD BREAKER

Suitable for 17.5" to 60" wheels

NEW

PNEUMATIC TOOLS TIGHTNESS/RELEASE

OP 1409 1" ALUMINIUM IMPACT WRENCH 1898Nm

Characteristics: • Free speed: 5.500rpm • Anvil size: 1" • Maxi torque: 1.898Nm • Working torque range: 271-1.627Nm • Air inlet: 3/8" • Average air consumption: 198l/min • Recommanded air pressure: 6.2bar • Lenght: 228mm • Weight: 5kg

2 3 4

OP 1407 1" IMPACT WRENCH 2441Nm

Powerful. Horizontal work. Anvil 210mm. Throttle incorporated into the handle. 3-position regulator. Double-hammer technology. Lateral exhaust.

Characteristics: • Max torque: 2441Nm • Release torque: 2033Nm • Speed: 6.000rpm • Length: 467mm

OP 1422 1" HGV IMPACT WRENCH 3390Nm

• • • • •

Powerful Horizontal work Anvil 210mm Throttle incorporated into the handle 3-position regulator. Double-hammer technology • Lateral exhaust

• • • • •

Noise level: 96dB Connection: 1/2" Supply pressure: 6.2bar Consumption: 282l/min Net weight: 7.5kg

7 8

NEW

Characteristics: • Max torque: 3390Nm • Speed: 5.000rpm • Length: 565mm • Noise level: 96dB • Connection: 1/2" • Supply pressure: 6.2bar • Consumption: 282l/min • Net weight: 11kg

9 10 11 363

PNEUMATIC TOOLS PRECISION TOOLS

OP 1404 VIBRATION GLOW PLUG REMOVAL KIT

Connection: 1/4"

4 pre-set torque settings: 10-20-30 or 40Nm

NEW

3 Comes with: • 5 sockets 8-9-10-11-12mm • 1 universal joint 1/4 • 2 impact extension bars

4 5

OP 1410 1/4"-3/8" D. RATCHET WRENCH KIT

Characteristics: • Speed: 850rpm • Max torque: 40.7Nm • Consumption: 113l/min • Lenght: 155mm • Weight: 0.5kg

Content: • Open head reversible ratchet 1/4"-3/8" D. • 1/4" D. quick release bit holder • 3 positions: forward/reverse/fixed • 10 sockets: 5.5 to 14mm • 1/4"D. universal joint • 100mm quick release extension bar

7 8

9 10

OP 1510 1/4"-3/8" D. RATCHET WRENCH KIT

Characteristics: • Speed: 850rpm • Max torque: 40.7Nm • Consumption: 113l/min • Lenght: 155mm • Weight: 0.5kg Content: • Open head reversible ratchet 1/4"-3/8" • 3 positions: forward/reverse/fixed

11 364

NEW

• 1/4"D. screwdriver bit holder • 21 bits 25mm: PH : 1-2 PZ : 1-2-3 FD : 4-5.5-6.5-8mm HEX : 3-4-5-6-7mm TX : 10-15-20-25-27-30-40mm

PNEUMATIC TOOLS PRECISION TOOLS

OP 1418 3/8" BUTTERFLY IMPACT WRENCH KIT

1 Characteristics: • Speed: 10.000rpm • Anvil: 3/8" (10mm) • Working torque range: 7-68Nm

• • • • •

Max torque reverse: 122Nm Air inlet: 1/4" Air consumption: 85l/min Lenght: 140mm Weight: 1kg

OP 1411 3/8" MINI RATCHET WRENCH • • • • • • • • •

Characteristics: • Max torque: 41Nm • Speed: 200rpm • Length: 196mm • Noise level: 79dB

Quiet Light Integrated speed regulator Needle bearing Reinforced head Ergonomic handle Reversible Swivelling connector Rear exhaust

• • • •

Connection: 1/4" Supply pressure: 6.2bar Consumption: 113l/min Net weight: 0.5kg

4 5 6

OP 1413 3/8" RATCHET WRENCH NEW Quiet. Light. Integrated speed regulator. Needle bearing. Reinforced head. Ergonomic handle. Reversible. Swivelling connector. Rear exhaust.

Characteristics: • Max torque: 68Nm • Working torque: 14 to 68Nm • Speed: 150rpm • Length: 256mm • Noise level: 79dB

• • • •

Connection: 1/4" Supply pressure: 6.2bar Consumption: 113l/min Net weight: 1.2kg

7 8

OP 1209 1/2" RATCHET WRENCH Quiet. Light. Integrated speed regulator. Needle bearing. Reinforced head. Ergonomic handle. Reversible. Swivelling connector. Rear exhaust. Characteristics: • Max torque: 68Nm • Working torque: 14 to 68Nm • Speed: 150rpm • Length: 256mm • Noise level: 79dB • Connection: 1/4" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight: 1.2kg

9 10 11 365

PNEUMATIC TOOLS DRILLING

OP 1475 AIR RIVETER KIT

3 Supplied in case

OM 0480 PRO PLIERS FOR RIVETS & LOCKNUTS

5 Suitable for : • Rivets Ø2.4-3.2-4-4.8-6.4mm • Locknuts Ø4-5-6-8-10mm

6 7 8

9 10 11 366

OM 0803 AUTOMATIC PUNCH

OM 0749 HAND RIVETER

Length: 143mm Chrome vanadium steel, resharpenable, 36kg impact force.

• Handle sheathed with return spring • Supplied with 4 nozzles Ø2.4-3.2-4.0-4.8mm • Key for nozzles assembly • Lenght: 270mm

Made in France

PNEUMATIC TOOLS DRILLING

OP 1460 SPOT DRILL

Quiet. Low speed/high torque. Orientable locking jaws. Ergonomic handle. Swivelling connector. Bottom exhaust. Characteristics: • Speed: 800tr/min • For reamer: Ø6.3/8.3/10.3x47mm • Length: 349mm • Noise level: 84dB • Connection: 1/4" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight: 2.5kg

SA 1460 EDGE CUTTER TUNGSTEN CARBIDE 8.3x47mm

For OP 1460

OP 1450 Ø10mm REVERSIBLE DRILL Two-speed trigger. Automatic chuck. Silencer. Composite housing. Ergonomic handle. Swivelling connector. Bottom exhaust with silencer. Reversing bar on both sides.

4 Characteristics: • Motor: 0.5cv • Speed: 1800rpm • Length: 185mm • Noise Emissions: 83dB

• • • •

Connector: 1/4" Supply pressure: 6.2bar Consumption: 113l/min Net weight: 1.1kg

See drills p.46

OP 1451 Ø13mm REVERSIBLE DRILL Two-speed trigger. Automatic chuck. Silencer. Composite housing. Ergonomic handle + additional handle. Swivelling connector. Bottom exhaust with silencer. Reversing bar on both sides.

5 6 7

Characteristics: • Motor: 0.5cv • Speed: 800rpm • Length: 218mm • Noise level: 83dB

• • • •

Connector: 1/4" Supply pressure: 6.2bar Consumption: 113l/min Net weight: 1.3kg

OP 1218 REVERSIBLE ANGLE-DRILL Ø10mm

Industrial key chuck 10mm. 90° head. Aluminum body. Reversible. Rear exhaust.

Characteristics: • Speed : 1.200rpm • Length : 203mm • Connector: 1/4"

• Supply pressure : 6.2bar • Consumption : 113l/min • Net weight : 1.1kg

11 367

PNEUMATIC TOOLS CUTTING

Light. Composite body. Low vibration. Swivelling connector. Safety trigger. Ergonomic handle with protection.

OP 1470 10mm AIR BODY SAW

Compatible with traditional saw blade Characteristics: • Strokes/min: 9500 • Stroke lenght: 10mm • Length: 300mm

• • • •

Connector: 1/4" Supply pressure: 6.2bar Consumption: 90l/min Net weight: 0.5kg

SA 1470 24-TOOTHS BLADE

For OP 1470

SA 1471 32-TOOTHS BLADE For OP 1470

See blades p. 335

4 5 6 7

OP 0500 PNEUMATIC KNIFE

• Cuts using blade oscillation • 1 OP0557 blade included

OP 1580 VIBRO CHISEL SET NEW Chisel set for an easier removal of corroded, seized or crimped parts. Content: • Pneumatic gun (capacity 3200bpm, operating pressure 6,5bar, consumption 180l/min, noice level 95dB) • 5 broches: chisel 20mm, curved chisel 30mm, shaped, punch, cutter

9 10 11 368

OP 1480 8 PCES SPECIAL VIBRO CHISEL SET Chisel set for an easier removal of corroded, seized or crimped parts.

• 2 hollow blocks Ø22mm • 1x1/2" D. block for impact sockets • O-rings

PNEUMATIC TOOLS CUTTING

OP 1207 ANGLE CUTTER Ø75mm

Powerful. 8-position adjustable swile guard, Speed regulator. Grip handle. Rear exhaust.

1 2

Characteristics: • Speed: 17.000rpm • Motor: 0.70cv • Length: 304mm • Connector: 1/4" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight: 1.4kg

3 4

OP 1206 ANGLE GRINDER Ø125mm

5 Powerful. Centrifugal regulator. Alu/composite housing. 9-position adjustable protective casing Reversible auxiliary handle. Fast-change disk. Rear exhaust.

Characteristics: • Speed: 10.000rpm • Shank: M14 • Disk: 0.8mm à 6mm • Motor: 0.75cv • Length: 238mm

• • • • •

Noise Emissions: 83dB Connection: 1/4" Supply pressure: 6.2bar Consumption: 113l/min Net weight: 2.0kg

6 7 8

OP 1214 REVERSIBLE DISK-SANDER

Powerful. Composite housing. Reversing bar on both sides. Rear exhaust with silencer. Characteristics: • Speed:16.000rpm • Pads: 75/100/125mm • Motor: 0.60cv • Length: 142mm • Noise level: 83dB • Connector: 3/8" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight: 1.0kg

10 11 369

PNEUMATIC TOOLS BODY REPAIR

1 2 3

For silicons, glues, putties application with 310ml cartridges and 300,400 and 600ml bags.

OP 5060 PNEUMATIC GUN FOR 370ml CARTRIDGES AND BAGS

• • • • • • • • •

Aluminium body and ring Total lenght: 370mm Air pressure inlet regulator from 4 to 8bar (10bar maximum) with 1/4" connection Valve strenght: 160kgf to 8bar Progressive trigger to enable speed control Lenght: 470mm Height: 270mm Sound level: 80dB Weight: 1100g

Comes with plastic spout

4 OP 5061 AIR CAULKING GUN

NEW For silicons, glues, putties application with cartridges 310ml, 400ml. • • • • • •

6 7

Aluminium body Total lenght: 325mm 1/4" connection Supply pressure: 5bar Progressive trigger to enable speed control Weight: 1300g

OP 1210 MULTI-SERVICE BRUSH

SA 1209 WIRE BRUSH (FINE) Ø23mm For OP 1210

Light. Safety guard. Grip handle + auxiliary handle. Use with gum or brush. Safety throttle. Rear exhaust.

For OP 1210

SA 1213 ADAPTER FOR GUM AND BRUSH Ø23mm Supplied with brush and support

For OP 1210

SA 1211 HARD GUM

10 11 370

SA 1210 METAL BRUSH Ø23mm

For OP 1210

• • • •

Speed: 3.500rpm Length: 280mm Noise level: 83dB Connection: 1/4"

• Supply pressure: 6.2bar • Consumption: 110l/min • Net weight: 1.2kg

SA 1212 SOFT GUM For OP 1210

OP 1421 PIN STRIP REMOVAL TOOL

SA 1421 GUM

Quiet. Light. Integrated speed regulator. Safety throttle. Ergonomic handle. Swivelling connector. Rear exhaust with silencer.

PNEUMATIC TOOLS BODY REPAIR

Characteristics: • ØPad: 90mm • Speed: 4000rpm • Length: 226mm • Noise level: 79dB • Connection: 1/4" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight: 0.95kg

1 2

For OP 1421

OP 1204 MINI DIE GRINDER Ø6mm 20,000rpm

OP 1203 MINI DIE GRINDER 6mm 25,000rpm

Light. Grip handle. Safety throttle. Rear exhaust with silencer. Speed regulator. Swivelling connector.

Light. Grip handle. Safety throttle. Rear exhaust with silencer.

3 4 5

Characteristics: • Speed: 20.000rpm • Length: 188mm • Noise level: 79dB • Connection: 1/4" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight: 0.7kg

Characteristics: • Speed: 25.000rpm • Length: 159mm • Noise level: 77dB • Connection: 1/4" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight: 0.4kg

SA 1203 DRILLED SHAFT SUPPORT DISKS For OP 1203/OP 1204/OP 1205

OP 1205 MINI ANGLE DIE GRINDER Ø6mm Light. Grip handle. Safety throttle. Rear exhaust with silencer. Speed regulator. Swivelling connector. Characteristics: • Speed: 20.000rpm • Angle: 115° • Length: 194mm • Noise level: 77dB • Connection: 1/4" • Supply pressure: 6.2bar • Consumption: 113l/min • Net weight: 0.5kg

6 7 8

9 10 11 371

PNEUMATIC TOOLS BODY REPAIR OP 1213 VERTICAL POLISHER Ø150mm

Composite body. Auxiliary handle. Lateral exhaust.

2 3

Characteristics: • Speed: 3.500rpm • Pad: Ø150mm • Length: 165mm • Noise Emissions: 80dB • Connector: 1/4" • Supply pressure: 6.2bar • Consommation: 110l/min • Net weight: 1.0kg

OP 1429 3" MINI POLISHER KIT Ø75mm

Characteristics: • Speed: 3.200rpm • Pad size: 75mm • Spindle thread: M6x100 • Air consumption: 170l/min • Lenght: 115mm • Weight: 900g

SA 1429 3" VELCRO SANDING PAD

5 6

For OP 1428/OP 1429

OP 1428 MINI ORBITAL SANDER KIT Ø50-75mm

Characteristics: • Speed: 15.000rpm • Pad size: 75mm • Spindle thread: M6x100 • Air consumption: 170l/min • Lenght: 108mm • Weight: 640g

SA 1428 2" VELCRO SANDING PAD

9 10 11 372

Axle Ø 6mm

For OP 1428

OP 1445 BELT SANDER

Characteristics: • Speed: 18.000tr/mn • Belt: 10mmx330mm • Length max: 330mm • Length folded: 207mm • Noise level: 84dB • Connection: 1/4" • Supply pressure: 6.2bar • Consumption: 116l/min • Net weight: 0.85kg

Axle Ø 6mm

Safety throttle. Covered grip. Handle exhaust + silencer. Swivelling connector. Safety lever.

SA 1445 SANDING STRIP 80 For OP 1445

SA 1446 SANDING STRIP 120 For OP 1445

PNEUMATIC TOOLS BODY REPAIR

OP 1211 ORBITAL SANDER 5mm Ø150mm WTIH DUST EXTRACTION

Ultra-light composite body with anti-vibration belt Speed regulator. Rear exhaust. Connection for cuff. For use by hand.

Characteristics: • Speed : 12.000rpm • Orbit: 5mm • Pad: Ø150mm • Length: 196mm

• • • • •

Noise Emissions: 84dB Connector : 1/4" Pression d’alim : 6.2bar Consommation : 57l/min Net weight : 0.7kg

OP 1212 ORBITAL SANDER 2.5mm Ø150mm EXTRACTING

6 holes for dust evacuation

Ultra-light composite body with anti-vibration belt Speed regulator. Rear exhaust. Connection for cuff. For use by hand.

• • • • •

6 holes for dust evacuation

Speed : 12.000rpm Orbit: 2.5mm Pad: Ø150mm Length: 196mm Noise level : 84dB

• • • •

Connection: 1/4" Pression d’alim : 6.2bar Consommation : 57l/min Net weight : 0.7kg

SA 1250 EXHAUST HOSE ASSEMBLY For OP 1211/OP 1212/OP 1311/OP 1312 Black trigger : oil free

OP 1311 5mm RANDOM ORBITAL PALM SANDER Ø150mm Ultra-light composite body with anti-vibration belt Speed regulator. Rear exhaust. Connection for cuff. For use by hand.

• • • • •

Noise Emissions: 76dB Connector : 1/4" Pression d’alim : 6.2bar Consommation : 57l/min Net weight : 0.7kg

OP 1312 2.5mm RANDOM ORBITAL PALM SANDER Ø150mm Ultra-light composite body with anti-vibration belt Speed regulator. Rear exhaust. Connection for cuff. For use by hand.

NEW

6 7

NEW

Characteristics: • Speed : 12.000rpm • Orbit: 5mm • Pad: Ø150mm • Length: 196mm

10 Characteristics: • Speed : 12.000rpm • Orbit: 2.5mm • Pad: Ø150mm • Length: 196mm

• • • • •

Noise Emissions: 76dB Connector : 1/4" Pression d’alim : 6.2bar Consommation : 57l/min Net weight : 0.7kg

11 373

PNEUMATIC TOOLS BODY REPAIR

OP 1336 MINI PROFESSIONAL SPRAY GUN HVLP 125

2 3 4 5 6 7

HVLP gravity gun for retouching and finishing. • • • • •

Excellent spread and spray Ergonomic, easy to hold Ø0.8mm nozzle Filter Service pressure: 1 to 2bar

OP 1335 HVLP PROFESSIONAL SPRAY GUN 600

HVLP gravity gun for bodywork and finishing work. • Excellent spread and spray • Reworked ergonomics to make it more comfortable to handle • Stainless steel nozzle, brushed aluminium body Ø2mm • Polyamide tub 600ml • Filter • Service pressure: 1 to 2bar

SA 1312 Ø1.2mm NOZZLE For OP 1335

SA 1314 Ø1.4mm NOZZLE

Supplied with Ø2mm nozzle

For OP 1335

SA 1316 Ø1.6mm NOZZLE

SA 1320 Ø2mm NOZZLE

For OP 1335

10 11 374

OP 1481 SANDBLASTING GUN 1000

For projection of soundproofing products, sealants and anti-rust.

Characteristics: • Nozzle Ø: 6mm • Working pressure: 8bar max • Air consumption: 100 to 150L/min • Weight : 480g

PNEUMATIC TOOLS BODY REPAIR

OP 0022 CLEANING GUN 1000

• Cleans bodywork, wheels, dashboard, air vents, engine... and door jambs • Ultra-low consumption thanks to special vortex technology • Its vortex propulsion system gives it unbeatable results.

2 3 SA 6032 FULL ROTARY NOZZLE

SA 6036 GASKET KIT

SA 6033 BOWL AND CAP FOR CLEANING GUN

For OP 0022

1000

SA 6022 CLEANING SOLUTION

For OP 0022

SA 6037 CONE

For OP 0022

For OP 0022/OP 0024

For OP 0022

OP 0024 CLEANING GUN EVOLUTION

Use it on seats, air vents, gear shift, wheels, etc.

1000

SA 6070 1/4" VALVE For OP 0022/OP 0024

SA 6072 TEFLON ROTATIVE NOZZLE For OP 0024

SA 6074 BEARINGS+BLADES REPAIR KIT

Encapsulated ball bearing Its 1L tank lets you use it without interruption. Weight 840g when empty. Easy to carry and small. Suitable with pure water or universal cleaner

For OP 0024

SA 6071 BOWL 1000

For OP 0024

OP 0044 PRO SPRAY GUN 1000

10 • • • • •

2 adjustable jets and air flow Nozzle L.300mm Nozzle Ø2mm Connector 1/4" Service pressure: 2 to 8bar

11 375

PNEUMATIC TOOLS AIR COMPRESSSORS

MORE Selection for body repair

WORKERS WORKER 1 WORKERS 2-4 WORKERS 5-6

REF OP 6750

DESIGNATION RECIPROCATING COMPRESSOR HOUSING SLOW MOVING 10CV

POWER 10 CV

OP 6875

SCREW COMPRESSOR SOUNDPROOFED 10CV

10 CV

OP 6811 OP 6815

SCREW COMPRESSOR SOUNDPROOFED 15CV SCREW COMPRESSOR SOUNDPROOFED 20CV

15 CV 20 CV

REF OP 6270 OP 6555

DESIGNATION BELT COMPRESSOR SLOW SPEED 270l 3CV LOW NOISE BELT COMPRESSOR SLOW SPEED 7CV

POWER 3 CV 7,5 CV

TANK 270l NC

OP 6500

BELT COMPRESSOR SLOW SPEED 500l 7.5CV

7,5 CV

500l

OP 6750 OP 6510

RECIPROCATING COMPRESSOR HOUSING SLOW MOVING 10CV BELT COMPRESSOR SLOW SPEED 500l 10CV

10 CV 10 CV

NC 500l

Selection for workshops

WORKERS WORKER 1 WORKERS 2-3 WORKERS 4-5 et + WORKERS 5 et +

4 5 6

For example, screw compressor systems are indispensable for continuous-usage applications and advisable for applications involving occasional long-usage periods. Piston compressors are more suited to short-usage applications. CLAS meets your specific needs

Option HGV 13bar available

Piston compressor Screw compressor

OP 6850 PAINTED VERTICAL TANK 500l 11bar

Each type of compressor has its own technical characteristics, which must be taken into account when choosing your compressor. Service life 4 000 h max. 30 000 h min.

7 8

9 10 11 376

500

Included: • Valves • Pressure gauge • Reductions and closures • Flexible 3/4 L.1500mm

NEW NEW

Oil residues env. 0,015 gr./m3 env. 0,003 gr./m3

OP 6856 PAINTED VERTICAL TANK 500l 16bar

500

Included: • Valves • Pressure gauge • Reductions and closures • Flexible 3/4 L.1500mm

Utilization capacity env. 50 % env. 100 %

PNEUMATIC TOOLS AIR COMPRESSSORS

OP 6875 SCREW COMPRESSOR SOUNDPROOFED 10CV NEW • • • • •

Swept volume: 63m3/h Max pressure: 10bar Connection 1/2 Engine horsepower: 10cv-7.5kW Sound level: 62dB

• Power supply: 400V TRI • Weight: 185kg • Dimensions: L.750xl.650xH.860mm

Direct transmission: optimized power

OP 6811 SCREW COMPRESSOR SOUNDPROOFED 15CV

NEW • Swept volume: 93m3/h • Max pressure: 10bar • Connection 3/4 • Engine horsepower: 15cv-11kW -Sound level 68dB

• Power supply: 400V TRI • Weight: 230kg • Dimensions: L.1000xl.700xH.1000mm

OP 6815 SCREW COMPRESSOR SOUNDPROOFED 20CV

• • • •

Swept volume: 123m3/h Max pressure: 10bar Connection 3/4 Engine horsepower: 20cv-15kW

• • • •

Sound level 68dB Power supply: 400V TRI Weight: 250kg Dimensions: L.1000xl.700xH.1000mm

OP 6555 LOW NOISE BELT COMPRESSOR SLOW SPEED 7CV

4 Control panel for better maintenance management and optimization of machine data.

NEW

5 6 7

Slow speed 800rpm • • • • • • •

Swept volume: 50m3/h Max pressure: 10bar Engine horsepower: 7.5cv-5.5kW Sound level 65dB Supply: 400V TRI Weight: 182kg Dimensions: L.850xl.620xH.1100mm

NEW

OP 6750 RECIPROCATING COMPRESSOR HOUSING SLOW MOVING 10CV

• • • • • • •

Swept volume: 74m3/h Max pressure: 10bar Engine horsepower: 10cv-7.5kW Sound level: 68dB Power supply: 400V TRI Weight: 225kg Dimensions: L.850xl.620xH.1100mm

Slow speed 800rpm

NEW

9 10 11 377

PNEUMATIC TOOLS AIR COMPRESSSORS

Slow speed 1080rpm

OP 6510 BELT COMPRESSOR SLOW SPEED 500l 10CV 500

2 3

NEW • • • • • • •

Visible oil level

Swept volume: 77m3/h Max pressure: 10bar Engine horsepower: 10cv-7.5kW Power supply: 400V TRI Tank capacity: 500l Weight: 360kg Dimensions:L.2000xl.610xH.1270mm

Power and performance thanks two cylinder V

4 5

OP 6500 BELT COMPRESSOR SLOW SPEED 500l 7.5CV 500

Slow speed 965rpm

6 7 8

9 10

• • • • • • •

Swept volume: 58m3/h Max pressure: 10bar Engine horsepower: 7.5cv-5.5kW Power supply: 400V TRI Tank capacity: 500l Weight: 310kg Dimensions: L.2000xl.610xH.1270mm

NEW

Power, performance, thanks two cylinder V

OP 6270 BELT COMPRESSOR SLOW SPEED 270l 3CV 270

Slow speed 1200rpm

• • • • • • •

Swept volume: 35m3/h Max pressure: 9bar Engine horsepower: 3cv-2.2kW Power supply: 400V TRI Tank capacity: 270l Weight: 171kg Dimensions: L.1550xl.600xH.110mm

NEW

Visible oil level

11 378

Power and performance thanks two cylinder V

Visible oil level

PNEUMATIC TOOLS AIR COMPRESSSORS OP 6223 COMPRESSOR 200l 3CV SINGLE-PHASE

200

NEW • • • • • • •

Swept volume: 20m3/h Max pressure: 10bar Engine horsepower: 3cv-2.2kW Power supply: mono 220V Tank capacity: 200l Weight: 102kg Dimensions: L.1390mmxl.430mmxH.895mm

Equipped with regulator

Visible oil level

3 4 5 6

Pneumatic reels p. 348

OP 6150 MONOPHASE COMPRESSOR 150l 3CV

150

NEW

Equipped with regulator

Visible oil level

• • • • • • •

Swept volume: 20m3/h Max pressure: 10bar Engine horsepower: 3cv-2.2kW Power supply: mono 220V Tank capacity: 150l Weight: 87kg Dimensions: L.1390mmxl.430mmxH.895mm

9 10 11 379

PNEUMATIC TOOLS AIR COMPRESSSORS

OP 6103 COMPRESSOR 100l 3CV SINGLE-PHASE 100

2 3

Visible oil level

NEW

• • • • • • •

Swept volume: 20m3/h Max pressure: 10bar Engine horsepower: 3cv-2.2kW Power supply: mono 220V Tank capacity: 100l Weight: 70kg Dimensions: L.1025mmxl.435mmxH.915mm

Equipped with regulator

4 5 6

OP 6252 COMPRESSOR 50l 2CV SINGLE-PHASE

Pneumatic reels p. 348

7 8

9 10 11 380

• • • • • • •

Swept volume: 13m3/h Max pressure: 8bar Engine horsepower: 2cv-1.5kW Power supply : mono 220V Tank capacity: 50l Weight: 36kg Dimensions: L.830xl.325xH.655mm

Carrying handle air

Cast iron Pressure reducer and filter

NEW

LUBRICATION & SPILL CONTAINMENT

CONTENTS

DRAINING

2 3 4 5 6 7 8 9

10 11 382

LUBRICATION

CLEANING

SPILL CONTAINMENT

383 398 405 407

HU 2019 13 BLOCK DRAIN PLUGS KIT

LUBRICATION & SPILL CONTAINMENT DRAINING

1 These plugs eliminate the problem of damaged oil sumps being tapped, as they replace the original plug without any other intervention. The thread pitch is the same as the original one, but with a larger thread diameter. Using these drain plugs does not request to restore the thread, they should be directly mounted. Each plug includes a second plug. Once mounted, the first plug is let on the oil tank while the other plug will be used for the next drainings.

2 3 4 5

This kit includes: SA 2025 (x1) plug M10x125 PSA HDI SA 2024 (x1) plug M12x150Renault/Toyota/Nissan/Mercedes SA 2023 (x2) plugs M14x125 PSA Diesel and HDI SA 2022 (x3) plugs M14x150 VW/Audi/Ford/Opel/Mercedes/Fiat JTD SA 2021 (x3) plugs M16x150 PSA/Renault/Volvo SA 2020 (x1) plug M18x150 PSA/Renault/Volvo/Toyota/Mitsubishi SA 2019 (x1) plug M20x150 Fiat/Alfa/Lancia SA 2018 (x1) plug M22x150 PSA/Fiat 25 copper sealing joints: Ø10mm, 16x1.5 5 rubber joints Ø1/4" 20 copper joints Ø12mm, 16x1.5

HU 2050 OIL SUMP REPAIR KIT WITH PLUGS

This kit is designed for damaged oil sump threading repairs

Composition: • 6 taps repair dimensions: Ø13-Ø15-Ø17-Ø20-Ø22mm • Selection 6 plugs/taps • Allocation of copper joints

6 7 8 9

10 11 383

LUBRICATION & SPILL CONTAINMENT DRAINING

HU 2020 SPECIAL DRAINING SPANNER XZN16 PIERCED HEX Ø19 VAG

HU 2002 3/8" D. DRAIN PLUG KEY SET

2 3 4

HU 2021 ROTARY DOG BONE WRENCH FOR DRAINING • • • • •

hex: 8-9-10-12-17mm hex: 10mm XZN pierced : 16mm Square: 7-8-10-11-12-13-14-5/16"-3/8" Square female: 10mm

Hexagonal: 8-9-10-12-14mm Square: 8-10-3/8"-1/2"

HU 4005 MAGNETIC OIL DRAIN PLIER 90mm NEW Flexible Cable Length: 90mm

HU 4006 MAGNETIC OIL DRAIN PLIER 200mm

6 7

Flexible Cable Length: 200mm

HU 4004 4 OIL DIPSTICKS FOR MOTOR CONTROL & AUTOMATIC GEARBOXES MERCEDES

NEW

This set of 4 dipsticks is designed to measure the oil level of engines and automatic gearboxes. It is essential after an oil change, since Mercedes vehicles are sold without any dipstick (tubes are only sealed by a simple cap).

8 9

10 11 384

HU 4002 OIL GAUGE/DIPSTICK FOR AUDI ELECTRONIC OIL LEVEL SYSTEM Can also be used to assist the calibration of the driver’s instrument panel.

Applications:: • 2.0 TFSI, 3.2 FSI, 3.0 Supercharged, 4.3 FSI, 2.0 TDI CR • OEM: T40178

HU 4003 OIL DIP STICK FOR AUDI Maintain easily the vehicle level when checking ATF.

• The tip (first 11mm) is the 20 °C cold fluid reading • The second reading is the minimum at 80 °C • Third reading is at max 80 °C

LUBRICATION & SPILL CONTAINMENT DRAINING

HU 2023 DOUBLE-CHAIN FILTER WRENCH Ø60-105mm

HU 2024 DOUBLE-CHAIN FILTER WRENCH Ø60-160mm

1 2

HU 9258 ADJUSTABLE PLIER FOR OIL FILTERS

HU 2018 OIL FILTER FLAT SPANNER Ø76mm RENAULT/PSA/FORD

Ø57 to Ø120mm

HU 9257 ADJUSTABLE PLIER FOR OIL FILTERS HGV

4 5

L.330mm

Ø80 to 190mm

HU 0010 STRAP WRENCH

HU 0009 ULTRA RESISTANT HGV STRAP WRENCH

6 NEW

L.500mm

• • • •

Max capacity: Ø30mm Lightweight aluminium handle (L.400mm) Ultra high resistance strap (L.1000mm, width 40mm) Weight : 760g

HU 2004 FILTER WRENCH 45-111mm

Loosen

HU 2007 1/2" D. OR 3/8" D. FILTER SPANNER

Ø63-Ø102mm Tighten/loosen

HU 2006 FILTER WRENCH 122-155mm Tighten/loosen

10 11 385

LUBRICATION & SPILL CONTAINMENT DRAINING

1 2 3 4 5 6 7 8 9

10 11 386

REF

Designation

HU 2230

FILTER SPANNER Ø64mm 14 SIDED

HU 2251

FILTER SPANNER RENAULT Ø66mm 18 SIDED

HU 2237

FILTER SPANNER Ø66mm 14 SIDED

HU 2244

FILTER SPANNER Ø66.5mm HEX

HU 2242

FILTER SPANNER Ø66.5mm 45 TEETH

HU 2233

FILTER SPANNER Ø66.6mm HEX

HU 2239

FILTER SPANNER Ø73mm 10 SIDED

HU 2240

FILTER SPANNER Ø73.8mm 12 SIDED

HU 2246

FILTER SPANNER Ø74mm 15 SIDED

HU 2245

FILTER SPANNER Ø74.4mm 14 SIDED

HU 2235

FILTER SPANNER Ø75.3 16 SIDED

HU 2248

FILTER SPANNER Ø76.5mm 8 SIDED

HU 2232

FILTER SPANNER Ø76.8mm 12 SIDED

HU 2241

FILTER SPANNER Ø87mm 16 SIDED

HU 2243

FILTER SPANNER Ø87mm 18 SIDED

HU 2238

FILTER SPANNER Ø84.6mm 14 SIDED

HU 2231

FILTER SPANNER Ø91mm 12 SIDED

HU 2247

FILTER SPANNER Ø92mm 10 SIDED

HU 2234

FILTER SPANNER Ø96mm HEX

HU 2252

FILTER SPANNER 18 SIDED

HU 2250

FILTER SPANNER Ø102mm 18 SIDED

OM 0337

OIL FILTER SPANNER Ø107mm 15 SIDED

HU 2236

FILTER SPANNER Ø107mm 18 SIDED

OM 0338

OIL FILTER SPANNER Ø108mm 15 SIDED

HU 2255

OIL FILTER WRENCH TOYOTA Ø64.5mm

OM 0314

OIL FILTER SPANNER Ø93mm 15 SIDED

OM 0316

OIL FILTER SPANNER Ø95mm 14 SIDED

OM 0315

OIL FILTER SPANNER Ø139mm 18 SIDED

LUBRICATION & SPILL CONTAINMENT DRAINING

FILTER SPANNERS HU 2230

HU 2251

HU 2237

HU 2244

HU 2242

HU 2233

HU 2239

HU 2240

1 2 3

HU 2246

HU 2232

HU 2245

HU 2241

HU 2235

HU 2243

HU 2248

HU 2238

4 5 6

HU 2231

HU 2247

HU 2234

HU 2252

7 8

HU 2250

OM 0338

HU 2236

OM 0337

9 HU 2255

OM 0314

OM 0316

OM 0315

10 11 387

LUBRICATION & SPILL CONTAINMENT DRAINING

1 2

HU 1999 SET OF 30 CAP OIL FILTERS FOR MULTI-BRAND

This oil filter spanner set lets you dismantle immersed filters as well as traditional filters.

3 4 5 6 7 Spanner available retail

8 9

10 11 388

REF

Designation

SA 2043

OIL FILTER WRENCH 65x14

SA 2055

OIL FILTER WRENCH 80/82x15

SA 2044

OIL FILTER WRENCH 65x67x14

SA 2056

OIL FILTER WRENCH 86x16

SA 2045

OIL FILTER WRENCH 66x6

SA 2057

OIL FILTER WRENCH 86x18

SA 2046

OIL FILTER WRENCH 68x14

SA 2058

OIL FILTER WRENCH 90x15

SA 2047

OIL FILTER WRENCH 73x14

SA 2059

OIL FILTER WRENCH 92x10

SA 2049

OIL FILTER WRENCH 76/76x15

SA 2060

OIL FILTER WRENCH 93x15

SA 2048

OIL FILTER WRENCH 74x15

SA 2061

OIL FILTER WRENCH 93x36

SA 2050

OIL FILTER WRENCH 75/77x15

SA 2062

OIL FILTER WRENCH 93x45

SA 2041

OIL FILTER WRENCH 76x12

SA 2063

OIL FILTER WRENCH 95x15

SA 2040

OIL FILTER WRENCH 76x14

SA 2064

OIL FILTER WRENCH 96x18

SA 2051

OIL FILTER WRENCH 76x8

SA 2065

OIL FILTER WRENCH 100x15

SA 2052

OIL FILTER WRENCH 76x30

SA 2066

OIL FILTER WRENCH 106x15

SA 2053

OIL FILTER WRENCH 78x15

SA 2067

OIL FILTER WRENCH 108x15

SA 2054

OIL FILTER WRENCH 80x15

SA 2068

OIL FILTER WRENCH 108x18

HU 2263 ARTICULATED RATCHET CROWS FOOT OIL FILTER WRENCH 27mm

LUBRICATION & SPILL CONTAINMENT DRAINING

1/2" D.

This wrench allows the oil filter removal of the FORD DURATORQ TDC engines. U-shaped, this tool is designed to make the operator's job easier. Reversible ratchet 27mm. Applications: C-Max (from 2010/04), Focus (from 2010/07), Galaxy (from 2006/03), Kuga (from 2008/02), Mondeo (from 2007/02), S-Max (from 2006/03), 2.0L Duratorq TDCI diesel, 2.2L Duratorq TDCI diesel Citroën : C4, Picasso, Grand Picasso, C5 Peugeot : 308, 3008, 508, 5008, 407, RCZ

Time saver

Engines: 2.0-2.2 HDI/TDCI Codes: DW10C, DW12C

NEW

HU 2253 CROWS FOOT OIL FILTER WRENCH FORD/CITROEN/PEUGEOT 27mm

3 This wrench allows the oil filter removal of the FORD DURATORQ TDC engines. U-shaped, this tool is designed to make the operator's job easier.

Applications: C-Max (from 2010/04), Focus (from 2010/07), Galaxy (from 2006/03), Kuga (from 2008/02), Mondeo (from 2007/02), S-Max (from 2006/03), 2.0L Duratorq TDCI diesel, 2.2L Duratorq TDCI diesel Citroën : C4, Picasso, Grand Picasso, C5 Peugeot : 308, 3008, 508, 5008, 407, RCZ

4 Double hex 27mm

1/2" D.

HU 2256 OIL FILTER WRENCH OPEL Ø32mm Models: Astra-G (1998-2003), Astra-H 2004 (2004-2009), Insigna 2009 (2009-), Omega-B 1994 (1994-2003), Signum 2003 (2003-2008), Speedster 2001 (2001-2006), Vectra-B 1996 (1996-2002), Vectra-C 2003 (2003-2008) Zafira-A 1999 (1999-2004), Zafira-B 2005 (2005-2010) Codes: A 20 NHT (LDK), Z 20 NET (L850Turbo), Z 22 SE (L850), Z 22 XE (L850), Z 22 YH (L850 DI) OEM code: KM-6150

HU 9259 SET OF 3 FILTER SPANNERS RENAULT

7 1/2" D.

HU 1991 SET OF 6 OIL FILTER SPANNERS NEW

Contents: • 1 housing Ø96mm 18 sided • 1 housing Ø76mm 12 sided • 1 housing Ø27mm hex

Applications: BMW V8 engine, Mini, Mercedes A Class, Vito CDI, Opel 16V (>98), Astra G, Corsa B, Vectra 2.0, Zafira, Ford TDCI, Renault, Nissan 1.5, 1.9, 2.2, 2.5 DCI, VW VR6

10 Composition: • 3/8" 24-27-32-36-38 • 1/2" 42mm

11 389

LUBRICATION & SPILL CONTAINMENT DRAINING

HU 0079GR 70l WASTE OIL DRAINER GREY 70

• • • • • • •

Tank capacity: 70l Oil tray: 15l Air pressure for oil discharge: 1-2bar/14-28psi Standard: tool plate+stand for scroll 4 wheels (2 swivel wheels) Min height: 1100mm Max height: 1680mm

3 4 5

SA 0079 STEEL EXTENSION FUNNEL For HU 0079/HU 0049/HU 0079GR

external Ø560mm inner Ø420mm

Total container capacity: 640mm Capacity: 15L Ø: 420mm

8 9

H. mini : 1100mm - H. maxi : 1680mm

10 11 390

REF

Designation

SA 0049

VALVE

SA 0063

DRAIN VALVE

SA 0064

FULL OIL DRAIN HOSE

SA 0069

EVACUATION VALVE

SA 0070

EVACUATION ELBOW CONNECTOR

SA 0071

LOCKING WHEEL

SA 0073

TRAY

SA 0074

TUBE

SA 0075

LEVEL INDICATOR

SA 0076

DRAINING HOSE

SA 0077

SWIVELLING WHEELS

SA 0078

FIXED WHEELS

SA 0096

TAPPED TRAY M8x20

SA 0097

GRID

LUBRICATION & SPILL CONTAINMENT DRAINING

AC 1005 COOLING FLUID REPLACEMENT DEVICE 35

• • • • • •

This station permits an ecological intervention avoiding coolant seepage so it is possible to dismount any parts properly.

It permits to bleed the system without open the air bleeder Two tanks are designed to contain the new and the old coolant separate Easy to connect to the cooling system by the connectors provided Works with air pressure between 5 to 8bar Dimension: 480x650x1050mm Weight: 60 kg

2 3

The workshop is kept clean, no pollution on the floor

2 swivelling wheels with brake

HU 0017 POLYETHYLENE VACUUM OIL CHANGER 24

2 metre vacuum hose with probes Vacuum gauge to control vacuum strength Venturi 1/4" entry Air silencer

Plug for emptying tank PSA/VW/Mercedes probe adapter

HU 0039 MOBILE WASTE OIL SUCTION 70l 70

• • • •

Venturi design Air inlet pressure: 8 to 10bar Suction rate: 1.5 to lL/min Air pressure for oil discharge: 1 to 2bar • Oil level indicator • Dimensions: 500x420x890mm • Includes copper and PVC probes (shank Ø : 12.2mm)

SA 0035 PROBES SET For HU 0039/HU 0049/HU 0059

SA 0034 VACUUM GAUGE For HU 0039/HU 0049

10 11 391

LUBRICATION & SPILL CONTAINMENT DRAINING

2 3

Ø: 420mm

SA 0035 PROBES SET

HU 0049 MOBILE WASTE OIL SUCTION 70l

For HU 0039/HU 0049/HU 0059

• • • • • • • • • •

Gravity draining Vacuum draining Collection bowl capacity: 15l Air inlet pressure: 8 to 10bar Suction rate: 1.5 to 2l/min Air pressure for oil discharge: 1 to 2bar Oil level indicator Max. height: 1680mm Dimensions: 500x420x890mm Includes copper and PVC probes (shank Ø: 12.2mm)

H. mini : 890mm - H. maxi : 1680mm

Total container capacity: 640mm

4 5

SA 0090 FULL MANOMETER

10 11 392

HU 0059 MOBILE WASTE OIL SUCTION 70l 70

- Transparent measuring glass Gravity draining Vacuum draining Air inlet pressure: 8 to 10bar Collection bowl capacity: 20l Transparent bowl capacity: 10l Suction rate: 1.5 to 2l/min Air pressure for oil discharge: 1 to 2bar Oil level indication H. maxi: 1680mm Dimensions : 500x420x890mm

- 1.5m suction hose with quick connect for probes H. mini : 890mm - H. maxi : 1680mm

external Ø560mm inner Ø420mm

SA 0034 VACUUM GAUGE

Ø: 420mm

• • • • • • • • • •

For HU 0079/HU 0049/ HU 0079GR

For HU 0039/HU 0049

For HU 0049

SA 0079 STEEL EXTENSION FUNNEL

Includes copper and PVC probes (shank Ø: 12.2mm)

SA 0059 TRANSPARENT MEASURING GLASS For HU 0059

SA 0035 PROBES SET For HU 0039/HU 0049/HU 0059

LUBRICATION & SPILL CONTAINMENT DRAINING HU 0080 80l USED OIL CONTAINER

HU 0115 COLLECTOR 115 L HVG

115

Total container capacity: 650mm

Total container capacity: 780mm

Ø: 434mm

Ø: 580mm

Capacity: 15L

3 4

H. mini : 1500mm - H. maxi : 1820mm

Adjustable container to increase capacity Lipped pril/filter Adjustable container to increase capacity

H. mini : 1420mm - H. maxi : 1920mm

6 7 8

REF

Tank color

HU 0080VE

GREEN

HU 0080JA

YELLOW

HU 0080GR

GREY

Special orders: delivery time 6 weeks

Gauge marked in liters and gallons

2m hose for pneumatic tank emptying

Turn both taps on to collect waste oil through gravity

10 11 393

LUBRICATION & SPILL CONTAINMENT DRAINING

HU 0110 110l HGV PIT COLLECTOR 110

840m

628

For engine and gearbox oil, etc... • Equipped with a breakwater and backflow protection grid • Width adjustable: min 840mm, max 1250mm • Dimensions: 304x840x628mm

5 6

HU 0032 HGV FLUID COLLECTION CONTAINER 50

510

660m

For HGV oil change on the ground For engine and gearbox oil, etc. • Equipped with a breakwater and backflow protection grid • Dimensions: 225mmx660mmx510mm 225mm

304mm

7 8 9

HU 0031 FLUID COLLECTION CONTAINER 35

Dimensions: 780x495x120mm Max. wheelbase :920mm Capacity max: 35 liters Equipped with 4 swiveling wheels 2 carry handles Pouring spout

10 11 394

760mm

HU 0035 TRUCK AXLE DRAIN PAN 3

LUBRICATION & SPILL CONTAINMENT DRAINING

This pan has been designed to collect fluids from truck axles. When removing a stub axle on a truck, the oil in the reducers flows on the rim. This pan fits on all the trucks rims to collect oil.

• To put directly in the rim to collect oil • Suitable for several rims sizes • With pouring spout

2 HU 3014 15l BLACK OIL DRAIN PAN

HU 3024 10l STEEL DRAIN TRAY

HU 3015 15l GREEN OIL DRAIN PAN

• • • •

Upper diameter: 45cm Bottom diameter: 37cm Length: 57cm Height: 14cm

• Dimensions : 432x331x89mm • 2 carry handles

HU 3025 22l STEEL DRAIN TRAY 22

7 • Dimensions : 489x371x153mm • 2 carry handles

HU 0950 DRAIN PAN FOR FLUIDS H.80mm

1300mm

1250mm

900mm

80mm Drain valve Stands for vertical storage

11 395

LUBRICATION & SPILL CONTAINMENT DRAINING

HU 1005 ELECTRIC BRAKE BLEEDER 6bar 5

• • • • • • •

• • • • • • • •

Has a pressure regulator that keeps fluid continuously pressurized

5 6 7

Comes with metal plugs tourism Ø43-48-52.5-59-64mm

HU 1109 PNEUMATIC BRAKE AND CLUTCH BLEEDER 5

For bleeding brakes and hydraulic clutches of all vehicles, can also bleed vehicles equipped with load-sensitive brake control and ABS (max. 1bar).

8 9

10 11 396

• Pneumatic operation • Comes with antifoaming rubber membrane • Air reserve in the bottom part of the tank • 5-litre capacity allows it to be used repeatedly • Fast-connector hose • Balanced carrying handle • Pressure control gauge • Plug rack • Compatible with DOT3/ DOT4/DOT5/DOT6 /Pentosin/LHM/LHS

Supplied with: • 5 metal plugs • 2 brake oil recovery jerricans

LUBRICATION & SPILL CONTAINMENT DRAINING OP 0501 BRAKE BLEEDER VACUUM KIT 800

Lets you empty the brake fluid reservoir and bleed the brake lines.

1 2

Vacuum kit capacity 800ml Powered by compressed air

3 4 HU 1105 ELECTRIC BRAKE BLEEDER 12V 4bar 5

• • • • • • • • • • • • • • •

Option: 5 plugs kit SA8210 Ø43-48-53-59-64mm

5 6 7 8

Has a pressure regulator that keeps fluid continuously pressurized

9 SA 8210 METAL PLUGS SET (5PCS) For HU 1003/HU 1004/HU 1005/HU 1105 Ø43-48-52.5-59-64mm

10 11 397

LUBRICATION & SPILL CONTAINMENT LUBRICATION

HU 0637 0.2l SYRINGE

HU 0638 1.5l SYRINGE

200

1500

HU 0629 FUEL TRANSFER PUMP 130

2 3

Supplied with transfer hoses

HU 0511 OIL CAN 500ml

7 8

HU 0011 TRANSFER PUMP FOR DRUMS 200L

HU 0013 ROTARY PUMP SUITABLE FOR ADBLUE

HU 0631 FLUID EXTRACTOR/ DISPENSER 9

Side lever barrel pump suitable for pumping various (non corrosive) liquids such as oil, diesel, anti freeze and washer fluid from standard 200l drums.

10 11

For motor oil, cooling fluid, brake fluid.... Do not use with flammable liquids

manual pump

398

HU 0647 ADAPTER FOR DRUMS Ø70mm NEW

500

5 6

HU 0645 ADAPTER FOR DRUMS M/F Ø55mm NEW

• Extending tube to reach the bottom of drums

A composite material has been supplied specifically to reduce the staining from adblue. also suitable for other fluids like water, diesel, oil...

• Probes lenght: 1600mmx3 • Ø6-8-10mm

pressure/vacuum inverter

• Supplied with a 2" bsp fitting • 0.3 litre per revolution • Inlet tube 1000mm

LUBRICATION & SPILL CONTAINMENT LUBRICATION

HU 0001 1l GRADUATED PITCHER

HU 0002 2l GRADUATED PITCHER

HU 0005 5l GRADUATED PITCHER

5 6 7

L.360xl.170mm

8 HU 0514 FUNNEL KIT Ø165mm 3 PCS

Funnel with flexible spout, filter and hose.

10 • Ø165mm funnel with filter (L.480mm) • Complete with flexible spout • Flexible clear hose 3/8" L.600mm

11 399

LUBRICATION & SPILL CONTAINMENT LUBRICATION HU 2254 DIFFERENTIAL FILTER SPANNER 46mm

1 2 3 4

• 46mm double hex. key, handle lenght 40cm • For Audi TT, Volkswagen Four Motion Golf and Passat models • Include 5mm Hex key

HU 4003 OIL DIP STICK FOR AUDI

HU 4002 OIL GAUGE/DIPSTICK FOR AUDI ELECTRONIC OIL LEVEL SYSTEM

Maintain easily the vehicle level when checking ATF.

5 6 7

For checking the oil transmission fluid on Audi.

• The tip (first 11mm) is the 20 °C cold fluid reading • The second reading is the minimum at 80 °C • Third reading is at max 80 °C

Can also be used to assist the calibration of the driver’s instrument panel.

HU 8005 GEARBOX REFILLING DEVICE 12.5

Applications:: • 2.0 TFSI, 3.2 FSI, 3.0 Supercharged, 4.3 FSI, 2.0 TDI CR • OEM: T40178

150

SA8515: refill adapter set

Pneumatic and manual pump of fluid refilling. Includes a kit of adaptation with various outlet angles: made for the poorly accessible areas.

10 11 400

LUBRICATION & SPILL CONTAINMENT LUBRICATION HU 0522 PNEUMATIC GREASE PUMP ON DRUM DOLLY 50-60Kg Ø385mm

• With follower plate • Supply hose L.120mm • Distribution hose L.500mm Ø16mm

HU 0520 PNEUMATIC GREASE PUMP ON DRUM DOLLY 50-60Kg Ø420mm

• With follower plate • Supply hose L.120mm • Distribution hose L.500mm Ø16mm

4 5

HU 0310 GREASE PUMP ON DRUM DOLLY 30kg Ø300mm max

• Ødrum ext.: 250 to 300mm • Drum cover membrane Ø310mm

HU 0311 GREASE PUMP ON DRUM DOLLY 30kg Ø330mm max

Ødrum ext.: 270 to 330mm Drum cover membrane Ø310mm

HU 0512 GREASE GUN 500ml 500

This high pressure grease gun works at 8000psi and has an improved plunger for complete grease removal for both cartridge and bulk grease loading.

500ml cartridge

11 401

LUBRICATION & SPILL CONTAINMENT LUBRICATION

HU 1011 DISTRIBUTION KIT FOR CISTERN 10

2 3

• For max oil density 130 SAE • Antifreeze compatible • Pump R 3:1-14L/min comes with reel Ø10mmL.10m and metered gun Cistern and cistern support not supplied

4 5

HU 0613 MOBILE OIL DISTRIBUTION BARREL 180-220kg Max.

220

Composition: HU0614+HU0615+HU0616

6 7 8 9

HU 0616 180-220kg DRUMS TROLLEY Max.

220

Galvanized steel frame trolley for drums from 180 to 220kg. Comes with 2 fixed front castors and 2 swivelling rear castors with brakes. Its adjustable chain for securing the drums, pump bracket and gun hook, allows to work and store it safely. Dimensions: • Lenght: 740mm (without castors) • Width: 630mm (without castors) • Height: 865mm • Front castors Ø: 127mm • Rear castors Ø: 76mm

HU 0614 DIGITAL OIL METER CONTROL VALVE

HU 0615 PNEUMATIC OIL PUMP+SUCTION TUBE FOR 180-220kg DRUMS 4

10 11 402

This volumetric oil gun dispenses oil simply, quickly and automatically. Characteristics: • Flow rate: 1-30l/min • Maximum pressure: 70bar • Precision: ±5% • Swivelling inch connector 1/2" • Flexible tip automatic drip L.250mm • 6V batteries included

Compatible with 180-220kg drums thanks to its suction tube (L.940mm) equipped with a strainer. Characteristics: • Maximum flow rate: 17l/min • Flow rate (with nozzle and 4m hose): 14l/min • Ratio : 5:1 • 4m hose included

LUBRICATION & SPILL CONTAINMENT LUBRICATION

Perfect for draining or filling of tank, electro pump useable for diesel, oil, water, cooling liquid transfer...

HU 0650 TRANSFER PUMP 12V

• • • • •

Power 12V Flow-rate 50L/min Hose L.4m 3/4" with filter Fuses capacity 25A Duty cycle 30min

HU 0651 TRANSFER PUMP 12-24V NEW

• • • • •

Power 12 or 24V Flow-rate 35-50L/min Hose L.4m 3/4 » with filter Fuses capacity 30A Duty cycle 30min

NEW

1 2 3 4

HU 0640 ADBLUE DISTRIBUTION DEVICE

NEW

Suitable for all kind of transfer installations even if it is by gravity. Simple and economic. Perfect fonctioning thanks to low resistance of flow. Equipped with lever protection with trigger blocking system (can be removed).

HU 0645 ADAPTER FOR DRUMS M/F Ø55mm

HU 0647 ADAPTER FOR DRUMS Ø70mm

5 6 7

NEW

OP 3503 PNEUMATIC FUEL SUCKER DISRIBUTOR DRUM 60kg 2 System complies with Atex standard 94/9 Ideal design sucks fuel or diesel, operates with a pneumatic pump equipped with special Viton gaskets.

Hose connectors 6-8-10mm

8 9

10 11 403

LUBRICATION & SPILL CONTAINMENT LUBRICATION

1 HU 0818 GREASE HOSE REEL Ø8mm 400bar

ABS drum

3 4 5 6 7

• Stop device every 50cm • Connector 1/4" zinced steel

HU 0521 GREASE GUN HOSE CONNECTOR WITH SPECIAL 4-GRIP HEAD 500

• • • •

Aluminium alloy handle Swivelling inlet connector Filter, rigid end and nozzle non-drip semi-automatic Hose L.500mm Ø16mm

HU 0850 FEMALE CONNECTOR FOR GREASING UNIT

8 9

10 11 404

HU 0623 GREASE PUMP CONNECTORS 7 PCS

HU 0851 MALE CONNECTOR FOR GREASING UNIT

LUBRICATION & SPILL CONTAINMENT CLEANING

EG 3521 MOBILE PARTS WASHER 9

Suitcase format, waterproof and transportable

Characteristics: • Power switch • Filter • Dimensions: 460x660x260mm • Weight: 5kg

SA 6819 BRUSHHEAD FOR BRUSH SYSTEM

For EG 3521

SA 3521 PUMP

For OP 3521/EG 3521

EG 0010 MAGNETIC PARTS WASHER

OP 0066 MOBILE PRESSURE SPRAYER 30l

Characteristics: • Meshes: 2x2mm • Diameter: 280mm • Depth: 100mm • Stainless steel

For acid sulphoric, nitric, muriatic, phosphoric. Max dilution 15%

• Air pressure for spray • Spray hose: Ø6.5mmx5m • Spray gun lenght: 620mm • Dimensions : 360x350x930mm

For OP 0066

OP 0067 STAINLESS STEEL MOBILE PRESSURE SRAYER

SA 0058 REPLACEMENT WAND

Rubber coated magnet prevents scratching.

This stainless steel washer basket is ideal for cleaning small parts and components (screw, hand tools) in association to a parts washer.

• • • •

SA 0057 REPLACEMENT NOZZLE For OP 0066/OP 0067

Air pressure for spray: 8bar Spray hose: Ø6.5mmx5m Spray gun lenght: 620mm Dimensions: 360x350x930mm

SA 0056 SPIRAL HOSE

SA 0068 REPLACEMENT WAND

5 For OP 0066/OP 0067

For OP 0067

10 11 405

LUBRICATION & SPILL CONTAINMENT CLEANING OP 0022 CLEANING GUN

1000

• Cleans bodywork, wheels, dashboard, air vents, engine... and door jambs • Ultra-low consumption thanks to special vortex technology • Its vortex propulsion system gives it unbeatable results.

3 4

SA 6032 FULL ROTARY NOZZLE

For OP 0022

SA 6033 BOWL AND CAP FOR CLEANING GUN

SA 6037 CONE For OP 0022

SA 6036 GASKET KIT

SA 6022 CLEANING SOLUTION 2

1000

For OP 0022/OP 0024

For OP 0022

2L can. To mix with water (25%).

For OP 0022

OP 0024 CLEANING GUN EVOLUTION

OE 7100 ULTRASOUND TANK

1000

6 7 8

1.2

Use it on seats, air vents, gear shift, wheels, etc.

10 406

Power supply: 220V-50Hz Power 70W Dimensions ext.: 230x180x155mm Dimensions tub: 160x130x60mm 5-cycle: 90-180-280-380-480 seconds

Encapsulated ball bearing Its 1L tank lets you use it without interruption. Weight 840g when empty. Easy to carry and small. Suitable with pure water or universal cleaner

Approximate capacity: 1.2l

• • • • •

OP 0044 PRO SPRAY GUN 1000

• • • • •

2 adjustable jets and air flow Nozzle L.300mm Nozzle Ø2mm Connector 1/4" Service pressure: 2 to 8bar

SA 7070 TUB OF ULTRASOUND CLEANING SOLUTION 2L 2

For OE 7100

LUBRICATION & SPILL CONTAINMENT SPILL CONTAINMENT

HU 2016 FUNNEL FOR DRUMS 200L

1 2

Strainer • Øint. 545mm • H.180mm

Ø545mm

OH 0009 DRUM GRIP 350kg

HU 3024 10l STEEL DRAIN TRAY

Max.

350

• Dimensions : 432x331x89mm • 2 carry handles

HU 3025 22l STEEL DRAIN TRAY

• Dimensions : 489x371x153mm • 2 carry handles

HU 3014 15l BLACK OIL DRAIN PAN 15

The drain pans are ideal to work out of a lift or when the procedure requires that the vehicle has wheels on the ground. Examples: when removing oil filters, a hose or even to make a drain. Being provided with carry handles, it is very simple to transfer the fluid contained to the collecting tank proper.

HU 3015 15l GREEN OIL DRAIN PAN

6 7

Warning : all our retention tanks are compatible with batteries storage

• • • •

Upper diameter: 45cm Bottom diameter: 37cm Length: 57cm Height: 14cm

MORE Extract from article R543-129-2 modified by decree n°2011-828 dated July 11, 2011 - art. 22 (France): " Distributors, municipalities, their groupings or the competent mixed labor unions or the other owners, including operators mentioned in the article R. 543-156, which carry out the collection of the waste batteries and automotive accumulators, store them in conditions allowing to ensure their removal and their treatment and to prevent the risks to the environment and human health related to this storing. " Source : environment code / statutory part/ livre V V/title IV / chapter III / section 7 / subsection 3.

8 9

10 11 407

LUBRICATION & SPILL CONTAINMENT SPILL CONTAINMENT

Max.

HU 0220 SPILL CONTAINMENT TRAY 20l Max.

HU 0230 SPILL CONTAINMENT TRAY 30l

• Dimensions: L.600xW.400xH.155mm • Removable slats

HU 0265 SPILL CONTAINMENT TRAY 100l

HU 0235 SPILL CONTAINMENT TRAY 65l 60 200

Max.

200

HU 0120 SPILL CONTAINMENT TRAY 120l Max.

HU 0240 SPILL CONTAINMENT TRAY 240l Max.

120

2 • Can hold (2 drums 240l) • Dimensions L.1600xW.800xH.150mm

For CLAS HU0450 tray

HU 0121 PLATFORM RAMP For easy loading. Dimensions: L.1290xW.810xH.180mm

8 9

• Stores drums on their side. • Dimensions: L.1375xW.940xH.390mm • Compatible with forklifts and pallet trucks

Renforced top tray

240

• Can hold (4 drums 480l) • Dimensions L.1600xW.1600xH.150mm

HU 0440 DRUM SUPPORT 220l Max.

408

100

• Dimensions: L.1200xW.800xH.175mm • Removable slats

• Dimensions: L.1000xW.600xH.175mm • Removable slats

• Dimensions: L.800xW.400xH.155mm • Removable slats • Shank Ø of the head: 35, 30 or 25mm according to the ring size • Claw height: 145mm

Max.

HU 0285 SPILL CONTAINMENT TRAY 250l 1 DRUM 250 300 Max.

• • • • •

Dimensions: L.1000xW.680xH.600mm Capacity 250L Removable slats Compatible with forklifts and pallet trucks Weight: 17kg

LUBRICATION & SPILL CONTAINMENT SPILL CONTAINMENT HU 0250 SPILL CONTAINMENT TRAY 250l 2 DRUM Max.

650

• • • •

250

For 1 or 2 drums Removable plastic duckboard Weight 20kg Dimensions:

L.1300xW.750xH.440mm • Compatible with forklifts and pallet trucks

2 3 4

HU 0450 SPILL CONTAINMENT TRAY 450l 4 DRUM Max.

1250

• • • • •

450

For 1 to 4 drums Removable plastic duckboard Weight 36kg Dimensions: L.1380xW.1290xH.480mm Compatible with forklifts and pallet trucks

6 7

HU 0255 SPILL CONTAINMENT TRAY 1100l Max.

2 • • • •

1100

Cubic format (not included) Dimensions: L.1450xW.1450xH.1000mm Compatible with forklifts and pallet trucks Weight: 105kg

8 9

10 11 409

LUBRICATION & SPILL CONTAINMENT SPILL CONTAINMENT

• • • • •

Cubic format (not included) Removable plastic duckboard Dimensions: L.2450xW.1450xH.575mm Compatible with forklifts and pallet trucks Weight: 120kg

HU 0260 SPILL CONTAINEMENT TRAY 1100L for 2xIBC Max.

1100

2 3 4

HU 0290 STORAGE BOX WITH DRUM 250l Max.

650

250

5 6 7

• Dimensions: L.1650xW.1100xH.2100mm • Store chemical products and hazardous waste

8 9

10 11 410

Opening on 2 sides

Extract from article 10 of the decree of February 2, 1998

I. Any liquid that could pollute the groundwater or soil must be stored within a bund wall with a retention capacity of at least the larger of the following two volumes: -100% of the capacity of the largest storage tank,

II. The bund wall must be leak-proof for the substances it may have to contain and resistant to physical and chemical attack by these substances. This must also be the case for its shut-off device, which must be kept closed.

-50% of the total capacity of all the storage tanks combined,

It must be possible to test the leak proofing of the associated tank(s) at any time (...)

(...) For the storage of containers with a unit capacity equal to or less than 250 liters, the retention capacity must be at least:

Tanks or recipients containing incompatible substances must not be stored within the same bund wall (...)

- In the case of flammable liquids, with the exception of lubricants, 50% of the total capacity of the barrels - In other cases, 20% of the total capacity of the barrels, (...)

SOURCE: Ministry of Ecology, Energy, Sustainable Development and the Sea (AIDA, INERIS)

EXHAUST GAZ INHALATION

EXHAUST GAZ INHALATION EXHAUST

1 EXHAUST

2 3 4 5 6 7 8 9 10

11 412

CONTENTS

413

EXHAUST GAZ INHALATION EXHAUST EG 0405 EXHAUST GAS EXTRACTOR

Pneumatic exhaust gas extractor that requires 5 to 8bar Ø10mm compressed air supply.

• Adjustable height min 15cm max 55cm • Inlet Ø130mm • Evacuation hose length 5m Ø75mm, 200°C

3 4 5 6

Evacuation hose L.5m Up to 200°C

Compressed air supply Ø10mm

EG 0406 DUAL EXHAUST SYSTEM GAS EXTRACTOR 2,5 Inlet: Ø52mm

Up to 200°C

Outlet: Ø90mm

9 10

11 413

EXHAUST GAZ INHALATION EXHAUST

EG 0421 EXTRACTOR REEL GAZ 10

NEW

• • • • • • •

Noise level 68dB Stop catch Automatic reel with stop device at end of travel Metal fan -0,75kW-220V mono 10m non-crush rubber hose Ø100mm-200°C Rubber funnel with CO plug Extractor 1350m3/h

3 4

EG 3200 PORTABLE EXHAUST GAS EXTRACTOR 6

Aluminium cast fan 0.55kW 220V single phase-motor Turbine rotation 2740 trs/min Sound level 76dB On/off switch Steel funnel Funnel height : mini. 200mm, max. 600mm Extractor 900m3/h Back flow hose Ø125mm, Length 6m

6 7 8 9 10

11 414

SA 3207 METER SCRATCH-PROOF 200°C EXHAUST PIPE Ø75mm Minimum delivery: 5m

SA 3217 METER SCRATCH-PROOF 200°C EXHAUST PIPE Ø100mm Minimum delivery: 5m

SA 3218 METER SCRATCH-PROOF 200°C EXHAUST PIPE Ø125mm Minimum delivery: 5m

SA 3219 METER SCRATCH-PROOF 200°C EXHAUST PIPE Ø150mm Minimum delivery: 5m

SA 3223 METER HIGH TEMPERATURE 500°C EXHAUST PIPE Ø102mm

Delivery per 10m

SA 3224 METER HIGH TEMPERATURE 500°C EXHAUST PIPE Ø127mm Delivery per 10m

SA 3225 METER HIGH TEMPERATURE 500°C EXHAUST PIPE Ø152mm Delivery per 10m

EG 0422 SINGLE EXTRACTOR GROUP

EG 0423 DOUBLE EXTRACTOR GROUP

5 Comes without back flow hose Ø160mm

EXHAUST GAZ INHALATION EXHAUST

2x5 Comes without back flow hose Ø160mm

Aluminium cast fan 0,75kW 220V-50Hz single phase Turbine rotation 2845trs/min

Sound level 76dB On/off switch

1m flexible back flow hose which can be extended to 3m, Ø125mm

5m non-crush rubber hose

Ø100mm-200°C

Wall supports

6 7 8 Rubber funnel with CO plug Extractor 1350m3/h

9 SA 3212 EXHAUST END Ø75mm

SA 3231 RUBBER NOZZLE WITH CLIP Ø125mm

SA 3222 EXHAUST END Ø100mm

SA 3232 RUBBER NOZZLE WITH CLIP Ø150mm

11 415

EXHAUST GAZ INHALATION EXHAUST

EG 0424 MECHANICAL EXTRACTOR REEL GAS HGV 10

Aluminium cast fan 0,75kW-400V-3phase Switch provided Sound level 76dB 10m non-crush rubber hose Ø150mm-200°C Automatic reel with stop device Extractor: 1350m3/h Comes without flexible back flow hose

3 4 5 6

EG 0428 EXTRACTOR UNIT GAS PORTABLE HGV 10

Aluminium cast fan 0,75kW 220V-single phase Turbine rotation 2845trs/min Sound level 76dB On/off switch 6m flexible back flow hose Ø150mm 10m non-crush rubber hose Steel funnel Extractor 1350m3/h

7 8

EG 0409 COMPRESSED AIR POWERED EXHAUST GAS EXTRACTOR 6

• • • •

Extractor : 790m3/h 6m rubber discharge hose 200°C Ø120mm Supply pressure 6bar Minimum supply line Ø10mm

9 10

11 416

Connect the extractor to a filtered non lubricated compressed air line

Conversions WEIGHT

LENGHT

1 1 1 1 1 1

1 inch (in) = 1 pouce = 2,54cm 1 foot (ft) = 1 pied = 30,48cm 1 yard (yd) = 1 verge = 0,9144m 1 mile (mi) = 1 mille = 1,6093km 0,6214mile = 1 kilomètre 1 nautical mile = 1 mille marin = 1,852km

ounce (oz) = 1 once = 28,3495g pound (lb) = 1 livre (UK) = 0,4536kg short ton (tn) = 1 tonne courte (US) = 0,9072t long ton (tn) = 1 tonne forte (UK) = 1,0160t hundredweight (US) (cwt) = 0,4536quintal hundredweight (UK) (cwt) = 0,5080quintal

SURFACE 1 square inch (sq.in) =1 pouce carré = 6,4516cm2 1 square foot (sq.ft) = 1 pied carré = 9,2903dm2 1 square yard (sq.yd) = 1 verge carré = 0,8361m2 4840 square yard (sq.yd) = 1 acre = 0,4047ha 1 square mile (sq.mi) = 1 mille carré = 2,590km2

PRESSURE 100kPa = 1 bar = 14,503psi 1,01325bars = 1 atm = 101,325kPa

VOLUME 1 1 1 1 1

1 1 1 1 1

cubic inch (cu.in) = 1 pouce cube = 16,3872cm3 cubic foot (cu.ft) = 1 pied cube = 28317cm3 cubic yard (cu.yd) = 1 verge cube = 0,7646m3 once (US) (fl.oz) = 0,0296l once (UK) (fl.oz) = 0,0284l

quart (US) (qt) = 0,9463l quart (UK) (qt) = 1,1365l gallon (US) (gal) = 3,7853l gallon (UK) (gal) = 4,5460l barrel of oil = 1 baril de petrol = 0,1590m3

TEMPERATURE

Conversion Celsius to Fahrenheit : C° = 5/9 (°F-32)

C°

-25

-20

-15

-10

-5

°F

-13

-4

TIGHTENING TORQUE CONVERSION TABLE The international unit is Nm (Newton x meter)

CONVERT Nm

CONVERT Mkg

1Nm = 0,102Mkg 1Nm = 0,738Ft-lbs 1Nm = 8,851In-lbs 1Nm = 141,84In-Oz

1Mkg = 9,81Nm 1Mkg = 7,23Ft-lbs 1Mkg = 86,8In-lbs

448

CONVERT Ft-Ibs

Foot-pound en Newton mètre : 1Ft-Ib = 1,35 Nm Foot-pound en mètre kilo : 1Ft-Ib = 0,138 Mkg Foot-pound en Inch-pound : 1Ft-Ib = 12 In- Ibs

CONVERT In-lbs 1 In-lbs = 0,1128Nm 1 In-lbs = 0,015Mkg 1 In-lbs = 0,083Ft-lbs 1 In-lbs = 15,873In-Oz

Legend GENERAL NEW

New in the catalog

HGV

Petrol

Consumables

Tension

Diesel

Warranty period

Power

AdBlue

IP rating

Cable/hose lenght

Quicklift device (lifting range)

Professional IP rating

Capacity

Low profile

Magnetic

120

Impact wrench can be used

Maximum load

Use oiler

LED quantity

Products with electrical plug

LED SMD quantity and equivalence in standard LED

RECESSES Flat

Hex tamperproof

Ribe

Female XZN

Square

Female double Hex

Female Ribe

Superlock

Phillips

Torx

Ribe tamperproof

End ball Hex

Hex

Torx E

Pozidrive

Female Hex

Torx tamperproof

XZN

PHILLIPS®: registered trademark of Phillips Screw Co.® TORX®: registered trademark of Camcar / Textron, Texas XZN®: registered trademark of Bauer-Schaulte RlBE®: registered trademark of Richard Berger POZlDRlVE® registered trademark of European Industrial Services

Collier Clic®: registered trademark of CAILLAU Circlips®: registered trademark of Nomel Blackson®: registered trademark of Henkel Loctite Haldex® : registred trademark of Haldex Traction Systems AdBlue® : registred trademark of Verband der Automobilindustrie e.V. (VDA)

449

General terms of sale 1. PREAMBLE The following terms and conditions of sales (hereinafter “Terms”) define obligations and responsibilities of both CLAS Equipements and the Customer (hereinafter “Customer”) and shall apply to any sale of goods and services, including services, systems, material and products. Any order or agreement between CLAS Equipements and any business purchaser is governed by these Terms, as stipulated under Article L441-6 of the French Commercial Code. The terms and conditions herein shall prevail over the terms and conditions of the Customer, unless expressly acknowledged in writing by CLAS Equipements. The present Terms shall remain in force even when not specifically referred to. To the extent that CLAS Equipements does not mention these Terms, in whole or in part, omission shall not be interpreted as a renunciation and CLAS Equipements shall remain entitled to require their strict application at any point of time. The invalidity or unenforceability of any terms or conditions set forth herein shall not affect the validity or unenforceability of the remaining terms and conditions hereof. In such event, CLAS Equipements shall add in lieu thereof a new valid agreement. 2. GENERAL Unless otherwise stated, proposals, offers and quotations shall be null and void unless accepted by the Customer within the timeframe defined by CLAS Equipements. All proposals, offers and quotations are governed by these Terms. While CLAS Equipements attempts to provide helpful and accurate information, guidance and diagrams related to the installation of the products, no such information is binding on CLAS Equipements. The Customer is responsible for verifying all information, guidance or diagram provided by CLAS Equipements prior to proceeding with the installation. 3. AGREEMENT Any order shall be submitted in writing by the Customer. The accurate reference of the good or service shall be stated clearly on the written purchase order. CLAS Equipements shall not be liable for errors or delays resulting from purchase orders being incomplete or incorrect. All orders are subject to acceptance by CLAS Equipements, who reserves the right in its sole discretion to open a Customer account or to refuse orders for legitimate reasons, including but not limited to: failure by the Customer to provide a credit insurance or conflict between the Customer’s trade-policy and Clas Equipements’ code of ethic. Non-acceptance of an order by CLAS Equipements does not entitle the Customer to receive any indemnifications. All orders binding CLAS Equipements and the Customer are governed by the proposal, offer and/or quotation and by the present Terms (hereinafter « Contract »). CLAS Equipements hereby objects to and rejects any terms and conditions proposed by the Customer (e.g. mentioned on the purchase order), which are different from or in addition to the Terms contained herein, unless expressly assented to in writing by CLAS Equipements. The sale agreement and the order shall not be considered as final until the Customer receives a written acceptance of the purchase order. The confirmation shall be sent to the Customer within one (1) business day after the purchase order is received. 4. SCOPE OF GOOD AND SERVICES SUPPLIED It is brought to the attention of the Customer that products are only briefly described in the contract documents. It is the Customer’s sole responsibility to read and understand the technical data and features of the product, which are made available to the Customer in the catalog distributed by CLAS Equipements, and for verifying that the product fully meets its requirements. The Customer is required to take all necessary actions to meet the conditions of use, which guarantee an optimal and safe operation of the product. These conditions include but are not limited to: qualified and trained operators and an appropriate environment (building, air-conditioning, liquids, protections…). CLAS Equipements hereby guarantees that the product complies with French laws and regulations. The Customer shall remain solely responsible for complying with all French and European regulations, safety standards or other technical obligations. In no event shall CLAS Equipements be liable for incidents caused by the failure of the Customer to comply with these obligations or for the consequences of such failure. 5. AMENDEMENTS TO THE EXISTING CONTRACT Amendment or modification of the existing Contract, when requested by the Customer, shall not be valid unless expressly assented to by CLAS Equipements. In no event shall a modification request be taken into consideration if received after the good or service has been sent. When a request is made by the Customer to amend the order, CLAS Equipements shall issue a new sales offer. In the event that the modification request is not accepted by CLAS Equipements or that the request raises any disagreement (technical or financial), CLAS Equipements shall deliver the product as defined in the original contract and in accordance to the terms and conditions of that contract. The Contract herein shall not be cancelled, suspended or repudiated by the Customer without the express and written consent of CLAS Equipements. In the event that CLAS Equipements authorizes a cancellation, CLAS Equipements reserves the right to charge the Customer with reasonable cancellation charges. 6. PRICE AND PAYMENT TERMS Unless otherwise stated in the Contract, prices of goods and services are as specified in the catalogue or in the current tariff’s list and/or, if applicable, in the quotation specifically made to the Customer. Prices shall be valid for the entire period covered by the respective document. Prices shall remain firm and fixed for the duration of that period. The Customer acknowledges that unit prices of the goods and services are established by CLAS Equipements from the first day of September of a given year to the last day of August of the following year. All prices are stated in Euros and do not include taxes or duties, in compliance with Incoterm Ex-Work (EXW – F.o.b. factory - Incoterm 2010), and do not include the cost of the packing boxes. Unless expressly assented to in writing by CLAS Equipements, prices do not include the following charges, which will be at the Customer’s expenses: loading, unloading, transportation, custom fees and insurances. CLAS Equipements reserves the right to adjust prices at any time. Invoices are payable in full within the due date stated on the invoice and/or on the sales offer. In the event that no specific agreement has been made, invoices are payable in full within thirty (30) days of the invoice date. Payment shall be made by bank transfer or check. Cash discount might be offered

450

under the terms and conditions specified on the invoice or on the sales offer. Circumstances for which CLAS Equipements is not responsible shall not be deemed to extend customer’s obligation to make payment in due time. The Customer shall not withhold payment of any invoice by reason of any right or offset or counterclaim which the Customer may allege to, unless expressly assented to in writing by CLAS Equipements. If at any time (i) the Customer’s financial situation is unsatisfactory or is in any way impaired or (ii) the Customer has failed to pay a previous order in full or in part or (iii) the Customer does not provide sufficient payment outcome guarantee, CLAS Equipements reserves the right to require full advance payment. In the event that the Customer refuses to make full advance payment and fails to provide sufficient guarantee, CLAS Equipements shall be entitled to cancel the order and the delivery of the product. In such event, the Customer shall not be entitled to any indemnification whatsoever. CLAS Equipements also reserves the right to modify its prices according to variations of the i) exchange rate and of the ii) customs and transit fees, that CLAS Equipements has to support. Should payment not be made when due, CLAS Equipements reserves the right, without formal notice, to i) require immediate payment of any other invoice, due or undue, whether or not drafts have been agreed and ii) to either suspend further deliveries or to require cash payment covering all current orders. In addition, CLAS Equipements shall be entitled to charge the Customer with a lump sum penalty of forty (40) euros – Article D.441-5 of the French Commercial Code - and with late penalty fees equal to the interest rate in effect at the European Central Bank (ECB) plus a margin of ten (10) percentage points. The reference rate applicable shall be that in force on the first day of January for the first semester or on the first day of July for the second semester. The Customer is hereby given notice that these penalty fees will automatically be charged to his account. 7. TERMS OF DELIVERY – RISK TRANSFER The terms of delivery specified in the order confirmation or sales offer shall apply. In the event that no specific agreement has been made, deliveries shall be ex works from the facility of CLAS Equipements, in compliance with Incoterm Ex-Work 2010. The Customer shall receive an informal notification. The Customer acknowledges that the transportation carrier shall insure the product. Consequently, CLAS Equipements shall not be liable for the product not being delivered or for being damaged during transportation. Shall the Customer fail to collect the product within one (1) month of when CLAS Equipements notifies the Customer that the product is available for collection, storage and security costs will be charged to the Customer. Delivery deadlines are approximate and are not guaranteed. The Customer shall have no right to apply any deduction or indemnification whatsoever against the invoice. Shall deliveries be delayed by more than two (2) weeks within mainland France or by more than eight (8) weeks outside of France, the Customer shall be entitled to require for the order to be cancelled. In such event, CLAS Equipements shall reimburse any prepayment already made. CLAS Equipements shall do its best to deliver the product on the date stated in the sales offer. In the event that CLAS Equipements is unable to deliver on time or at all due to events beyond its control, such as force majeure, CLAS Equipements shall have the right to extend the delivery dates in compliance with the French jurisprudence. In such event, CLAS Equipements shall not be liable for the delay or the cancellation of the delivery. Delivery of the product is the Customer’s sole responsibility. Consequently, risks of loss and deterioration shall pass to the Customer at such time as possession of the product is given to a transportation carrier. Delivery shall only be confirmed when the Customer has fulfilled all of his obligations towards CLAS EQUIPEMENTS, including but not limited to payment of the order. 8. RESERVATION OF TITLE Title to the products shall not pass from CLAS Equipements to the Customer until all payments due hereunder, including fees and interests, have been duly made. The Customer acknowledges that it is not allowed to i) modify, incorporate or assemble the product before payment has been duly made and ii) sell or pawn the product before title has been passed to the Customer. It is the Customer’s responsibility to inform CLAS Equipements immediately shall the product be confiscated in aid of a third party and to hereby inform the subsequent creditor about this reservation clause in the benefit of CLAS Equipements. If default is made in any of the payments herein, including fees and interests, CLAS Equipements shall be entitled to i) claim the product back at any time at the Customer’s expenses and risks and ii) cancel the sale with immediate effect by notifying the Customer in writing, without further formalities nor notices. In such event, CLAS Equipements shall be authorized to enter the premises where the goods may be located and to remove them, without prejudice to CLAS Equipements’ right to recover any further damages or interests that might be applicable. The Customer shall commit to make the product easily identifiable. Article 7 of the current Terms related to the risk and damage transfer shall prevail over the Clause hereby. Subject to the French legal provisions applicable, open orders shall immediately and automatically be suspended shall a safeguard, recovery or liquidation procedure be implemented. In such event, CLAS Equipements shall be entitled to claim back the product from the Customer. In the event that the product is returned under the Clause hereby, CLAS Equipements shall be entitled to keep all amounts already paid as compensation. 9. WARRANTY This warranty exclusively covers the product sold by CLAS Equipements to the Customer and shall not be transferred to a third party, in the event that the Customer should sell the product. Every CLAS Equipements products have a pictogram which indicates warranty duration or not of the product (“CO”, 1, 2,3, 5 years, etc…) This information is available on the website www.clas-equipements.com and also in CLAS Equipements catalog.

9.1. Defects Goods and services sold hereunder are covered by a warranty against operating faults resulting from a defect in material, provided these defects are related to technical and contractual specifications and are limited to the provisions hereinafter. The warranty applies to the product only, as per the Contract and does not cover supplies that have been offered. CLAS Equipements also warrants any repair work performed under the warranty hereby for a period of six (6) months; this warranty is intended to material and workmanship and is limited to components replaced at the time of the repair - wearing and expendable parts being excluded. The total period of the warranty hereby shall not exceed the period of the warranty under Clause 9.2. hereinafter. The warranty shall not apply if: - The Customer has supplied defective products and components or an unauthorized service partner has altered the product sold by CLAS Equipements. - The product has been altered by fortuitous events or force majeure or components must be replaced or repaired due to an accident, abrasion, corrosion, normal wear and tear, negligence, lack of supervision or maintenance and misuse of the product. - The product has been improperly used or has been operated with unauthorized components/ parts or has been operated by unqualified or inexperienced staff. - The product has been improperly stored. - The product has been improperly installed (e.g. improper electrical connection or defective power supply). CLAS Equipements reserves the right not to implement the warranty shall the Customer fail to submit payment in part or in full. 9.2. Duration and starting point of the warranty The warranty duration is limited to the period indicated on the warranty pictogram, started from delivery date. Is excluded from the guarantee all consumable products identified by the pictogram “CO”. 9.3. Customer’s obligations The Customer shall immediately notify CLAS Equipements in writing about the faults of the product and commits i) to provide all necessary evidence regarding the faults in question and ii) to facilitate any procedure aimed at ascertaining the faults. No goods may be returned without CLAS Equipements’ prior written permission. Goods shall be returned at the Customers’ expenses. Customer shall assume all expenses in the event that the repair or replacements are not covered by the terms of the warranty. Customer shall immediately inspect the product upon receipt of shipment. Unless the Customer notifies CLAS Equipements of any claim for shortage, defect or nonconformity in the product within forty eight (48) hours after receipt of the shipment, the product shall be deemed finally inspected and accepted and no claim shall be accepted by CLAS Equipements. 9.4. Application terms CLAS Equipements’ only obligation shall be, at CLAS Equipements’s option, the repair or replacement of the defective products, which shall be returned to the Customer at CLAS Equipements’ expenses. In the event that the product is not damaged, it shall be returned at the Customer’s expenses. 9.5. DAMAGES CLAS Equipements makes no warranty other than the one set forth herein and it is expressly agreed that CLAS Equipements shall not be expected to indemnify the Customer in any other way whatsoever. 10. LIABILITY In no event shall CLAS Equipements be liable for any damage, indirect and/or immaterial, consequential or incidental, arising out of or in connection with this agreement or the goods and services, including but without limitation, breach of any obligation imposed on CLAS Equipement in the Terms herein. Consequential damages for purposes shall include, without limitation, loss of use, income or profit. The Customer and its insurer shall waive any right of action against CLAS Equipements and its insurer. CLAS Equipements sole liability shall in no event exceed the aggregate purchase price collected by CLAS Equipements. 11. INTELLECTUAL PROPERTY The Customer acknowledges that any and all of the intellectual property rights, including quotations, sales offers and catalogues and all documents shared or sent by CLAS Equipements, shall remain the sole property of CLAS Equipements, even in the event that the Customer has financially contributed to the expenses. None of the aforementioned documents shall be reproduced, unless expressly assented to in writing by CLAS Equipements. This clause shall remain valid after the contract has expired. 12. ASSIGNEMENT The contract is concluded intuitu personae with the Customer and shall not be assigned, unless expressly assented to in writing by CLAS Equipements. 13. APPLICABLE LAW AND LANGUAGE – PLACE OF JURISDICTION As expressly agreed, these General Terms and Conditions of Sale are governed by the French laws or by the Vienna Convention on the international sale of goods. The Terms and Conditions herein have been written in French. Shall these terms be translated, the French version shall prevail over any other version in the event that there shall be any inconsistency. The sole place of jurisdiction of any legal dispute arising between the contracting parties shall be the competent court of CLAS Equipements headquarters.