ContrastSpa Duo #Chilling4Champions The ContrastSpa Duo consists of 2 Spas with a shared set of steps and allows for contrast bathing – alternating hot and cold water immersion for accelerating athlete recovery, minimising fatigue and lowering the risk of injury. Each Spa can accommodate up to 4 athletes enabling the whole squad of players to get through quickly. The temperature of each Spa can be individually controlled. For cold water immersion in the cold CryoSpa Sport, it is typical to set the temperature between 10°C and 14°C. With the hot ThermoSpa, we have found that most people prefer to set the temperature between 33°C and 35°C. You decide how many times your athletes alternate between hot and cold. The norm is to alternate each player 3-4 times between the two temperatures. Massage jets can be controlled in their intensity.
Four Treatment Modalities • Sit on top for ankle therapy • Stand on step for submersion to mid-thigh • Stand in deep end for submersion to waist depth • Sit on step for full body submersion
Benefits • Easy to maintain saving on labour and cost • Hydrostatic pressure and 20 jets per spa for a penetrating cold / heat • 100sq ft filtration per spa keeps the water clear • Quiet operation • Short treatment times due to intense cold / heat • High quality low temperature digitally controlled chiller • Digitally controlled heater with display on the ThermoSpa • Stainless steel safety rail and steps • High salt concentration in the CryoSpa aids infection control
ContrastSpa Duo Product views
Athletes using the CryoSpa:
Andy Murray Tennis player
Widnes Vikings Rugby players
Dusan Lajovic Tennis player
Rebecca Tunney Gymnast
GarbiĂąe Muguruza Tennis player
ContrastSpa Duo Technical Data It is your choice, whether to position the ThermoSpa and CryoSpa left or right. Empty weight of each Spa: c. 200 kg Capacity of each Spa: c. 550 l Length/Width/Height of each Spa: 1.55 x 0.80 x 1.20m Steps / Safety rails: Stainless steel Width: 0.55m
BACK Option B
Massage jets: Jet pump:
CryoSpa (cold)
ThermoSpa (hot)
Power supply ThermoSpa: 230 v / 1 / 50 Hz 30 Amp RCD protected supply
Option A
0.80m
0.55m
0.80m
2.10m
1.55m
Steps
FRONT
20 jets each 1.5 kW each
Power supply CryoSpa: 230 v / 1 / 50 Hz 20 Amp RCD protected supply
Drain connector (Flexible hose with quick release fitting will be supplied) Hoses to and from the Chiller / CryoSpa Air IN and OUT
2.20m
HEATER
CHILLER Air OUT
0.40m
Air IN 0.60m 1.00m
0.90m
Temperature: Power consumption:
Heating to 40°C 3.0 kW
CHILLER Temperature: Power consumption: Cooling capacity: Weight: Length/Width/Height:
Chilling to 1°C 0.9 kW or 1.2 kW 2.2 kW or 3.3 kW c. 50 kg 0.60 x 0.40 x 0.56m
Optional: Stainless Steel Wall Mounting Bracket.