1 minute read

Settings CEBIS Calibration

Daily zeroing

This should be carried out with the machine running, threshing engaged at maximum speed and with no material in the machine.

The following items need to be zeroed on a daily basis:

1. Set “zero returns”

2. Set “zero yield”

Learn the AUTOCONTOUR end stops at the start of the season.

Select the calibration

At the start of each crop, make sure you have selected the correct crop type, or your personal crop settings.

Tips: Learn the working position of the cutterbar in the front attachment menu. This may also have to be changed when combining different crops. The working position will have to be re-learnt if the cutterbar is changed.

Select crop type and then press

This article is from: