HANDHELD STEAM CLEANER Course work for MF4756 – Product Design and Modelling. Spring 2013 29/04/13
Clodagh O’Mahony 11110988
1
ITEM NO.
13
15
1 2 3 4 5 6 7
6
8 9
12
10
7 14
5
4
8
11 12 13 14 15 16
11
17
Default/ QTY. 2. Left 1 A. Bottom Assembly 1 6. Stopper 1 17. Nozzle 1 8. Bar 1 7. Button External 1 D. Water Heater 1 Assembly 18. Motor 1 25. Circuit Board 1 Casing C. Lock Switch 1 Assembly 3. Right 1 B. Button Assembly 1 4. Black Shell 1 26. Tubing 1 27. Tubing 2 1 PHT 2.2-type I-AB-812 N 1.Brush 1 PART NUMBER
10 9
17 3
Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. 2 For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
Final Assembly
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
Final Assembly DWG. NO. REV.
Material:
Scale 1:5
Weight: g
Sheet 1 of 2
A 1
2
2 3 4 5 6
1
4
3 5
PART NUMBER 22. Rubber To Fill Port 21. Plastic To Fill Port 23. Connector 24. Metal Ball 5. Water Fill Section 28. Tubing 3
QTY. 1
B 1 2
1 1 1 1 1
2
QTY. 1 1
20. Button Inside 19. Button Cover
1
6
1
2 6
3 1
7
5 4
C 1 2
2 D 1 2 3 4 5 6 7
13. Heater Bottom 11. Water Heater Top 12. Heater Ring 15. Cable Cover 16. Cell Battery PHT 2-slot-D-4-N 14. Fuse
SolidWorks Student Edition. For Academic Use Only.
QTY. 1 1 1 1 1 8 1
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
Sub-Assemblies
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
QTY. 1 1
10. Lock Switch (Internal) 9. Lock Switch
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
Sub-Assemblies DWG. NO. REV.
Material:
Weight: g
Scale: Varies
Sheet 2 of 2
13.50
10
2.50
2 27
2
2
16
16 20
30
6
10
1
2
1
2
2 2 23 23 26
SolidWorks Student Edition. For Academic Use Only.
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
1
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
1.Brush DWG. NO. REV.
Material:
Scale: 1:1
Weight: g
Sheet 1 of 25
200.4 172
11
160 65 Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
2
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
2. Left DWG. NO. REV.
Material:
Scale: 1:5
Weight: g
Sheet 2 of 25
Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
3
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
3. Right DWG. NO. REV.
Material:
Scale: 1:5
Weight: g
Sheet 3 of 25
90 20
2
64
Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
4
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
4. Black Shell DWG. NO. REV.
Material:
Scale: 1:2
Weight: g
Sheet 4 of 25
100 R4
10
70
110
R2 R1
R65
120
R10 23
20
5
7
25
1 2
130
20
30
8.50
10
SolidWorks Student Edition. For Academic Use Only.
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
5
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
5. Water Fill Section DWG. NO. REV.
Material:
Scale: 1:2
Weight: g
Sheet 5 of 25
20
28
0.75
3째
31
18
8 R6
1.50
6
2
R0.50
25
Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
6
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
6. Stopper DWG. NO. REV.
Material:
Scale: 2:1
Weight: g
Sheet 6 of 25
90
R10
10
50
7.50
R6
R10 3 9 90 90 2
10
22
20 15
12
16
2
35
30
35 13 12
R6 3
4
5 28
SolidWorks Student Edition. For Academic Use Only.
1 3 19 27
12
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
7
Name Drawn
Clodagh O'Mahony
8 Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
7. Button External DWG. NO. REV.
Material:
Scale: 1:1
Weight: g
Sheet 7 of 25
20
2
Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
8
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
8. Bar DWG. NO. REV.
Material:
Scale: 5:1
Weight: g
Sheet 8 of 25
15 2
1.50
0.50
4
3.50
8 25
11 13 Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
9
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
9. Lock Switch DWG. NO. REV.
Material:
Scale: 2:1
Weight: g
Sheet 9 of 25
23
14
3
5
11
6
0.50
5
SolidWorks Student Edition. For Academic Use Only.
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
10
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
10. Lock Switch (Internal) DWG. NO. REV.
Material:
Scale: 2:1
Weight: g
Sheet 10 of 25
1.50
R4
8 6
R2 3
10
R2
7
5
15 12
R1
51
R1 R2
61
4
R3
4
18.50
9
3
SolidWorks Student Edition. For Academic Use Only.
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
11
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
11. Water Heater Top DWG. NO. REV.
Material:
Scale: 1:1
Weight: g
Sheet 11 of 25
2 55
51
Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
12
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
12. Heater Ring DWG. NO. REV.
Material:
Scale: 2:1
Weight: g
Sheet 12 of 25
5
55 3
6.50
10
60
39
10
4
4 50 13
15
20
32
8
14
4.50
4.50
R0.50
6
6
3
5
3
8
8
7
45
SolidWorks Student Edition. For Academic Use Only.
4
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
13
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
13. Heater Bottom DWG. NO. REV.
Material:
Scale: 1:2
Weight: g
Sheet 13 of 25
40 14
2
3
R1
0.50
5
R0.20
Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
14
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
14. Fuse DWG. NO. REV.
Material:
Scale: 2:1
Weight: g
Sheet 14 of 25
5 3
3
6.50
R1.50
5
3
3 28 34
0.50
9
R1.50 R1.50 Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
15
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
15. Cable Cover DWG. NO. REV.
Material: AISI Type 316L stainless steel Weight: 1.33g
Scale: 2:1
Sheet 15 of 25
16
16
8
4
R0.25
1
6.50 Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
16
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
16. Cell Battery DWG. NO. REV.
Material:
Scale: 2:1
Weight: g
Sheet 16 of 25
15
2
2
2
3
9 8
12
2
13
11
10
2
2
7 8
35
10
10
5
2
2
6 3.50
SolidWorks Student Edition. For Academic Use Only.
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
17
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
17. Nozzle DWG. NO. REV.
Material:
Scale: 1:1
Weight: g
Sheet 17 of 25
20
R16
SolidWorks Student Edition. For Academic Use Only.
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
18
10
14.50
32
40
50
R19
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
18. Motor DWG. NO. REV.
Material:
Scale: 1:2
Weight: g
Sheet 18 of 25
18 13
R2
6
4
R3
R2
Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
19
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
19. Button Cover DWG. NO. REV.
Material:
Scale: 2:1
Weight: g
Sheet 19 of 25
2.50
1.50
14 11 3.50
4 3.50
2
0.50
1.50
1.50
15
6
5
12
Unless otherwise specified dimensions are in millimetres. Tolerances are:
SolidWorks Student Edition. For Academic Use Only.
XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
20
R0.20 Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
20. Button Inside DWG. NO. REV.
Material:
Scale: 2:1
Weight: g
Sheet 20 of 25
R0.75
R2
4
25
2
R0.50
44 36 28 22
7.50
16
15
32
26
52 6 2
SolidWorks Student Edition. For Academic Use Only.
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
21
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
21. Plastic To Fill Port DWG. NO. REV.
Material:
Scale: 1:1
Weight: g
Sheet 21 of 25
1
10 R5
5
5
3.50
1.50 2
2
R0.50
2.50
1 1
3
SolidWorks Student Edition. For Academic Use Only.
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
22
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
22. Rubber To Fill Port DWG. NO. REV.
Material:
Scale: 2:1
Weight: g
Sheet 22 of 25
2
SolidWorks Student Edition. For Academic Use Only.
1.50
5
11
2
1
1.50
0.75 3
1.50
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
23
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
23. Connector DWG. NO. REV.
Material:
Scale: 5:1
Weight: g
Sheet 23 of 25
2
3 1
3
1
R7
10
SolidWorks Student Edition. For Academic Use Only.
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
24
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
24. Metal Ball DWG. NO. REV.
Material:
Scale: 2:1
Weight: g
Sheet 24 of 25
6
1.50
3
18
23
3
8
5
6
13.50 41
4 2
50
80
5
26
R5
1
11
46
10
1
14
6 15
SolidWorks Student Edition. For Academic Use Only.
Unless otherwise specified dimensions are in millimetres. Tolerances are: XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
ANGLE TOLERANCE 0 30', UNLESS NOTED
Sheet Name:
25
Name Drawn
Clodagh O'Mahony
Date 28/04/2013
Checked
DO NOT SCALE DRAWING
University of Limerick SIZE A4
THIRD ANGLE PROJECTION
Title:
25. Circuit Board Casing DWG. NO. REV.
Material:
Scale: 1:2
Weight: g
Sheet 25 of 25