- - - - - - - - - - - -
New Nick Richardson Singature frame. 20.75, 21 & 21.25” TT. CNC logo detail on HT. Internal offset gussets on top & down tubes. 75.2 degree head tube angle. 71 degree seat tube angle. 11.5” BB height. 13.75” rear end. Removable brake mounts & hardware. Full Post Heat Treated Frame. Weight approx. 4.6lbs. Available in flat black, purple storm, red, silver storm and white.
- - - - - - - - - - -
New Liam Fahy-Hampton Signature frame. 20.5, 20.85 & 21.25” TT. CNC logo detail on HT. 75.5 degree head tube angle. 71 degree seat tube. 11.5” BB height. 13.75” rear end. Removable brake mounts & hard ware. Full Post Heat Treated frame. Weight approx. 4.7lbs. Available in flat black, purple storm, red, silver storm and white.
- - - - - - - - - - - -
Mick Bayzand Signature frame 20.85 & 21” TT Internal offset gussets on top & down tubes. CNC logo detail on HT 75 degree head tube angle 71 degree seat tube angle 11.5” BB height 13.5” rear end removable brake mounts & hard ware heat treated HT, BB & drop outs weight approx. 4.8lbs Available in flat black, purple storm, red, silver storm and white.
- - - - - - - - - - - -
Alex Hiam Signature frame Kids size geometry with 19.8 & 20.25” TT Internal offset gusset on down tube CNC logo detail on HT 75.2 degree head tube angle 71 degree seat tube angle 11.5” BB height 13.5” rear end removable brake mounts & hardware Full Post Heat Treated frame Weight approx. 4.5lbs Available in flat black, purple storm, red, silver storm and white.
- - - - - - - - - - -
Shane Badman Signature frame. 18” & 18.85” TT. CNC logo detail on HT. 74.5 degree head tube angle. 72 degree seat tube angle. 13” rear end. Smaller & improved 10mm drop outs with 14mm cutting lines. Removable brake mounts & hardware. Full Post Heat Treatment Frame. Weight approx. 4.2lbs. Available in black, red, white, blue.
- - - - - - - - - - -
Simon O’Brien signature frame. 18.1” & 18.9” TT. CNC logo detail on HT. 75 degree head tube angle. 72 degree seat tube angle. 13” rear end. 10mm drop outs with 14mm cutting lines. Removable brake mounts & hardware. Heat treated HT, BB & drop outs. Weight approx. 4.2lbs. Available in black, red, white, blue.
Rail Hop Bee’s. Melbourne. Australia Photo: Cooper Brownlee.
- - - - -
Liam Fahy-Hampton signature forks. Full heat-treated Colonized CrMo forks. Single butted tapered forks legs. Full CNC machined one-piece steerer tube with built-in bearing race. 6mm thick drop outs with CNC cut outs for added weight saving.
- - - - - -
Oversized blowholes inside steerer tube to further reduce weight. 3/8� & 14mm axle slots. 30mm offset. Available without or with brake mounts. Weight 895 grams (1.97lbs) Lifetime warranty to original purchaser.
- - - - - -
Ryan Guettler Signature Forks. Full heat-treated Colonized CrMo forks. Single butted forks legs. Full CNC machined one-piece steerer tube with built-in bearing race. 5mm thick drop outs with cut outs for added weight saving. Oversized blowholes inside steerer tube to further reduce weight.
- - - - -
Oversized drill hole in fork crown to again further weight saving. 7075T6 Alloy Top Cap uses 3/8 socket wrench to adjust. 3/8� & 14mm axle slots. 35mm offset. Weight 890 grams (1.96lbs)
-
Lifetime warranty to original purchaser.
- - - -
Shane Badman signature forks. Full Heat treated Colonized CrMo fork. One piece CNC steer tube with brake cable clearance. Flatland specific fork with brake mounts.
- - - -
Zero offset. 10mm with 14mm cutting lines. Weight: 861 grams (1.89lbs) Available in Matt Black, White, Candy Red & Candy Blue.
- - - -
Simon O’Brien signature forks. Full Heat treated Colonized CrMo fork. One piece CNC steer tube with brake cable clearance. Flatland specific fork with brake mounts.
- - - -
15mm offset. 10mm with 14mm cutting lines. Weight: 871 grams (1.92lbs) Available in Matt Black, White, Candy Red & Candy Blue.
Blender on the top of a mountain. Queensland. Australia. Photo: Cooper Brownlee.
- - - - - - - -
Nick Richardson signature bars. 8.25” rise. 11 Butted Full Heat Treated Colonized CrMo 29.5” width. 12º back sweep. 1º up sweep. 820 grams or 1.80lbs. Available in Matt Black, White, Candy Red, Purple Storm, Silver Storm & Chrome.
- - - - - - -
Ryan Guettler signature bars. 7.9” rise with 26” width. 12º back sweep. 4º up sweep. Weight: 725 grams (1.59lbs) With these bars on your bike you will get all the mad bitches! Available in Matt Black, White, Candy Red, Purple Storm, Silver Storm & Chrome.
TEDDY BARS - - - - - - - - - -
Mick Bayzand signature bars. 13 Butted Full Heat Treated Colonized CrMo 27.5” width. 8” rise. 10.5º back sweep. 2º up sweep. Smaller, 16mm diameter crossbar tubing. Weight: 750grams (1.65lbs) Will enable you to bomb any rail in sight, yeah boy! Available in Matt Black, White, Candy Red, Purple Storm, Silver Storm & Chrome.
- - - -
Shane Badman signature bars. Flatland specific. 7.9” rise. 24.4” wide. 2.5 degrees up sweep. 2.5 degrees back sweep. Weight: 845 grams (1.86lbs). *Available in Matt Black, White, Candy Red & Candy Blue.
- - - - -
Simon O’Brien signature bars. Flatland specific 4 piece design. 6.8” rise with 23.25” width. *6º back sweep. *1º up sweep. Weight: 739 grams (1.62lbs) Available in Matt Black, White, Candy Red (not shown) & Candy Blue.
- - - - - -
Liam Fahy-Hampton signature grip Soft, yet durable Krayton Rubber compound. Extra long at 150mm & 30mm in diameter. Comes with plastic push-in style bar ends. Weight: Come on... it’s a grip !! OK, they’re 124 grams (4.37oz) per pair. Available from December 2009.
- - - - -
Lightweight minimal design. Full CNC machined 7075 T6 Alloy. Single grub screw mounting bolt. Weight : 20grams per pair or 0.70oz. Available in Black, White, Red, Purple, Blue & Tangerine.
Deadly kinker grind. Canada.
- - - - - - -
Ryan Guettler signature stem. Full CNC machined from 7075T6 Alloy. Stronger & lighter than 6061T6 stems. Super lightweight yet simple design. Classic front-load 6 bolt system. 52mm reach. Comes with 4 hollow bolts in front, 2 rear bolts solid. Removable gyro plate. Weight: 248 grams (8.74oz)
- - - - - -
Full CNC machined from 6061T6 Alloy. Light weight flatland specific design. Top-load device enables easy access to stem bolts for handlebar adjustments. 35mm reach. Weight: 208grams (7.33oz) Available in Black, Red, Blue & Purple (not shown).
MICK BAYZAND
- - - -
Stump style seatpost. Using the advanced Pivotal™ technology. Weight : 98grams or 3.45oz Available in Black, White, Red, Purple, Blue & Tangerine
- - - -
Using the Advanced Pivotal™ technology. 330mm flatland length. Alloy construction. Weight: 218 grams (7.68oz)
Slingin the bee’s, Queensland, Australia. Photo: Cooper Brownlee
- - - - - -
Liam Fahy-Hampton signature seat Super Slim Pivotal Seat with Cover. Using a new, totally revised Pivotal base. Improved nose & tail bumper design. Durable covering with Kevlar rear. Weight: 262 grams (9.24oz). Available in Black & Brown as shown.
- Super Slim Pivotal Seat with Cover. - Using a new, totally revised Pivotal base. - Improved nose & tail bumper design. - Durable covering with Kevlar rear. - Weight: 262 grams (9.24oz) - Available in Black/Red, Black/Purple, Black/Laser Green, Black/Tangerine, Black/Blue & Black/Silver
BRAKE LEVER
- - - - -
Super Slim Pivotal Seat without Cover. Using a new, totally revised Pivotal base. Minimalist design for the weight conscious. Weight: 174 grams (6.13oz) Available in Black, Laser Green, Silver, Clear, Clear Red & Clear Purple.
- - - - - -
Two different Signature models available. Shane Badman (Cube) shown & Simon O’Brien (DejaVu) models available. Using the Advanced Pivotal™ Technology. Finger friendly underbody. Tough vinyl material top covering. Hollow bolt. *Weight: 326 grams (11.50oz). …
- - - - -
Designed by Clint Millar. Full CNC machined precision lever. Super lightweight at 60grams or 2.11oz. Half the weight of most other BMX levers on the. Increased braking power & performance. Annoying lever wobble reduced due to precision CNC construction.
- - - -
Left and Right Versions. No cable ferrule to bend or strip out when using straight cable. Optional special ferrule included for gyro users. Compatible with Odyssey gyro cables, SST oryg cables & Dragonfly style cables when using a gyro. Replaceable brass bushings included.
- - - - - -
Full CNC 6061T6 Alloy Flatland specific pegs. Knurled for excellent grip. Internally relieved for weight saving. Length: 115mm. Diameter: 35mm. 10mm axle size only. Sold individually. *Weight: 134 grams each (4.72oz) Colours - Black, Red, Purple (not shown) & Blue.
- - - - -
Super lightweight design. CNC machined from 7075 T6 Alloy. Patented unique offset machining process. Meaning thicker on the bottom where you grind & thinner on the top where you don’t grind. Built-in chain tensioner (optional). *4” length with 37mm outside diameter. 3/8” & 14mm axle slots. Sold individually. Weight: 107 grams or 3.77oz (no tensioner) Weight: 113 grams or 3.98oz (with tensioner) *Designed for Park and Light street use only.
- - - - -
MID & Spanish style available. Available in 19mm & 22mm sizes. Full CNC machined 6061 T6 Alloy. Unique CNC detail to give it that different look. Available in Black, White, Red, Purple, Blue & Tangerine.‌
- - - -
Under license from Cane Creek Cycling Components, US patent 5,095,770. 45/45 style with Colony logo engraving. Weight: 55 grams or 1.94oz. Available in Black, White, Red, Purple, Blue & Tangerine.‌
Front jam no hands at Nerang. Gold Coast Australia. Photo: Cooper Brownlee
- - - - - -
Super lightweight design. Very affordable & shin friendly. Two different plastic styles available - Nylon/Fibre mix or Polycarbonate. - Looseball axle type only in 9/16�. Colours available in Nylon/Fibre mix - Black, White, Laser Green, Silver, Grey, Purple, Yellow & Red. Colours available in Poly carbonate - Clear, Clear Black, Clear Purple, Clear Red & Clear Blue. Weight per pair: Nylon/Fibre mix 376 grams (13.26oz) - Poly carbonate 356 grams (12.55oz)
- - - - - - - - -
Heat treated Colonized CrMo tubular arms. 2.5 piece design using single bolt design. Unique heat treated 19mm 48 spline hollow CrMo axle. *Super lightweight yet simple design. Left and right hand drive compatible. *175mm length and 160mm (flatland version). Flatland version only compatible with micro sprockets. Comes with hollow hardware. Weight: Street version 790 grams (1.74lbs) Flatland version 778 grams (1.71lbs) Street version available in Matt Black, White, Candy Red, Purple Storm & Silver Storm. Flatland version Matt Black, White, Candy Red & Candy Blue.
360 Turndown, Queensland. Australia. Photo: Cooper Brownlee
- - - - - -
Ryan Guettler signature sprocket. Full CNC machined 7075 T6 Alloy. 5mm thickness. Super lightweight design. 23T, 25T, 28T only. Comes supplied with 19mm and 22mm adaptor spacer
- - -
Odyssey Wombolt Crank compatable Weight: 23T 52 grams (1.83oz), 25T 58 grams (2.04oz), 28T 71 grams (2.50oz) Available in Black, White, Red, Purple, Blue & Tangerine.
- - - - - -
Full CNC machined from 6061T6 Alloy. Flatland specific in 18T & 20T sizes. Suitable with micro drive cranks only (such as our own Colonial Flatland Cranks) 3mm thick giving the perfect mix of strength & weight for flatland. Weight: 18T 20 grams (0.70oz) 20T 28 grams (0.98oz). Available in Black, Red, Purple (not shown) & Blue.
- - - - - - -
6000 series alloy rim. Weight saving holes on inside wall. Engraved logo. Comes with Colony rim strap. 36 hole only. Weight : 510 grams each (1.12lbs) Available in Black, White (not shown), Red, Pur ple, Dark Blue and Tangerine.
- - - - - - - -
6061T6 alloy hub shell. Only available with 14mm hollow CrMo axle. 8mm allen key ends in axle for easy maintenance. Polymer bushing bearing in driver for trouble free performance. Comes standard with 9T driver. RHD and LHD versions available. 36 hole only. Weight: 415grams (14.63oz)
- - - - - - -
Female bolt style with CrMo axle for strength. Alloy 6061T6 alloy shell. Sealed bearings. 10mm bolts only. 36 hole only. Available in Black, White, Red, Purple, Blue & Tangerine. Weight: 270 grams (9.52oz)
Opposite Ice grind, Melbourne Australia. Photo: Cooper Brownlee
- - - - -
CNC machined from 7075T6 alloy. Replaces non-drive side cone nut. Suits our cassette hubs only. Eliminates the need to spread your frames rear end to fit it all in. Weight: only 45 grams
- - - -
Rim strips to protect your tubes from spoke pinches. Black Colony print. Sold in pairs. Will make you look cool although no one will ever see them.
- - -
Colony Logo fitted cap. Sizes 7-1/8, 7-1/4, 7-3/8, 7-1/2, 7-5/8, 7-3/4 & 8 inch. Available in September 2009
- - -
Liam Fahy-Hampton signature fitted cap. Sizes 7-1/8, 7-1/4, 7-3/8, 7-1/2, 7-5/8, 7-3/4 & 8 inch. Available in September 2009
- - - - - -
Clone Front wheel set. Clone Rim & Hubs laced with Black stainless steel spokes. Colour coded rim & hub. Comes with Clone Rim strap. Weight: 1,018 grams (2.24lbs) Available in Black, White, Red (not shown), Purple, Blue & Tangerine.
- - - - - - -
Clone Cassette wheel set. Clone Rim & Hubs laced with Black stainless steel spokes. Colour coded rim & hub. 36 hole RHD only. Comes with Clone Rim strap. Weight: 1,168 grams (2.57lbs) Available in Black, White (not shown), Red, Purple, Blue & Tangerine.
T-Bog, spine to bank transfer at 5 Dock, Sydney Australia. Photo: Cooper Brownlee