assembling-the-mobile-stand

How to assemble mobile stand The mobile stand consists of a base, tower, hook bracket and H bracket.

D H bracket C Hook Bracket

B Tower

A Base with 4 wheels

1. Attach the H bracket to the rear of the LED touchpanel with the screws provided.

2. Put the base on the floor and set the tower vertically.

3. Secure the tower to the base using 5pcs of M8 screws inserted from underneath the base (A-1).

4. Fit the cable access cover using 4pcs of M4 screws.

Front

Back

M4 black screws Support

A-1 [ Front view ]

[ Side view ]

How to assemble mobile stand 5. Attach the Hook Bracket to the Tower using 8 pcs M8 screws as shown.

The position you attach the hook bracket determines the height of the centre of the screen.

Top

Bottom

6. Lift the LED Touchpanel into position so that the H bracket engages the Hook bracket on both top and bottom edges. Slide the Touchpanel horizontally so that the 4 slotted holes in the Hook Bracket line up with the screw holes in the H bracket.

a

a

b 7. Insert 4 hexagonal screws through the hook bracket holes and tighten.

b Side view of how the H bracket, attached to the Touchpanel, engages with the Hook Bracket.

[ Side view ]