ZTP0010
Name: Joey Micro6 Name: IR Relay Box Description: Six button, wallmounted room control unit. Ideal for Four basicrelays, to medium orthrow. Description: singleclassrooms pole double boardrooms. Controlled by any of the CommBox control units, or via RS232. Extra notes: Unit comes complete with power pack and access port (right)
Four power-rated changeover relays May be used for controlling lights, screens, curtains etc. Can perform power, low voltage or signal switching Standard DIN rail mounting enclosure IR or RS-232 controllable Commands for ON, OFF, Toggle and Momentary control Addressable. Up to 16 “Simple range” products can co-exist on the same system Internal power supply can power small control panels (e.g. Joey wallmount, door entry panel) and IR receivers Indicator LEDs display relay status Moulded power plug/socket (supplied) avoids accidental wrong connections and enhances safety
Enclosure
Standard ABS, DIN rail mounting, 3 unit
N umber of relays
Four
Type of relays
Single pole changeover
Relay switching voltage (max)
250 volts
Relay switching current (max)
10 mps
Relay connections
3 pin pluggable screw terminals
Power input
220 – 240 volts AC 50-60Hz
IRBus power output
12 volts (nominal) @ 250mA max- Over current protected with internal self-resetting polyfuse. 86mm(H) x 69mm(W) x 60mm(D)
Dimensions
COMMAND SYSTEMS Pty Ltd abn: 99 001 742 034 PO Box W105, Warringah Mall, NSW2100, Australia
Telephone +61 2 9938 4811 Fax: +61 2 9905 6153 w w w . c o m m a n d s y s t e m . c o m
AUSTRALIA SHANGHAI SINGAPORE MALAYSIA