Name: ZTT0857 Room Movement Sensor
Name: Joey Micro6
SKU: ZTT0857
Description:The SixZTT0857 button, uses wallmounted room Description: passive infra-red control unit. Ideal for basic to in medium technology to detect movement a room. It is intended classrooms or boardrooms. to be used with the CommBox range of control systems to allow them to automatically shut down equipment in Extra notes: comes complete power the room after aUnit period of time during with which no pack and isaccess portso (right) movement detected, saving energy and maximising projector lamp life.
For your safety Please ensure that any wiring used to connect a ZTT0857 to other equipment is kept clear of mains wiring and follows applicable local wiring codes. Under no circumstances may a ZTT0857 be connected directly to power mains wiring. Make sure that the power supply you are using meets your local safety regulations and that its voltage does not exceed 15 volts DC. Unregulated power supplies can output voltages that are well above what is shown on their label. The ZTT0857 is intended for indoor use only. Dimensions
85mm x 66mm x 45mm
Mounting Height
1.1m to 3.1m
Wide Angle
15m x 15m : 90 degrees
Long Range
30m x 13 degrees
Detection zones (wide angle(
20 Dual element zones in 4 layers
Sensor
Dual Element Pyroelectric
Detect display
Red Led
Warmup period
30 seconds
Relay output
Normally Closed dry contact
Supply voltage
9 – 15v DC
Supply current
15mA
Supported by
Joey authoring software V2.7.15 and above & TCWin
COMM BOX Pty Ltd abn: 431 583 817 05 Telephone +61 2 9938 4811 Fax: +61 2 9905 6153 PO Box W105, Warringah Mall, NSW2100, Australia w w w . commbox . c o m.a u
AUSTRALIA, CHINA, MALAYSIA, SINGAPORE, KOREA, SOUTH AFRICA